diff options
Diffstat (limited to 'crypto/kerberosIV/doc/install.texi')
| -rw-r--r-- | crypto/kerberosIV/doc/install.texi | 368 |
1 files changed, 0 insertions, 368 deletions
diff --git a/crypto/kerberosIV/doc/install.texi b/crypto/kerberosIV/doc/install.texi deleted file mode 100644 index 240c04e2e2a8e..0000000000000 --- a/crypto/kerberosIV/doc/install.texi +++ /dev/null @@ -1,368 +0,0 @@ -@node Installing programs, How to set up a realm, What is Kerberos?, Top -@chapter Installing programs - -You have a choise to either build the distribution from source code or -to install binaries, if they are available for your machine. - -@c XXX - -We recommend building from sources, but using pre-compiled binaries -might be easier. If there are no binaries available for your machine or -you want to do some specific configuration, you will have to compile -from source. - -@menu -* Installing from source:: -* Installing a binary distribution:: -* Finishing the installation:: -* Authentication modules:: -@end menu - -@node Installing from source, Installing a binary distribution, Installing programs, Installing programs -@comment node-name, next, previous, up -@section Installing from source - -To build this software un-tar the distribution and run the -@code{configure} script. - -To compile successfully, you will need an ANSI C compiler, such as -@code{gcc}. Other compilers might also work, but setting the ``ANSI -compliance'' too high, might break in parts of the code, not to mention -the standard include files. - -To build in a separate build tree, run @code{configure} in the directory -where the tree should reside. You will need a Make that understands -VPATH correctly. GNU Make works fine. - -After building everything (which will take anywhere from a few minutes -to a long time), you can install everything in @file{/usr/athena} with -@kbd{make install} (running as root). It is possible to install in some -other place, but it isn't recommended. To do this you will have to run -@code{configure} with @samp{--prefix=/my/path}. - -If you need to change the default behavior, configure understands the -following options: - -@table @asis -@item @kbd{--with-shared} -Create shared versions of the Kerberos libraries. Not really -recommended and might not work on all systems. - -@item @kbd{--with-cracklib=}@var{dir} -Use cracklib for password quality control in -@pindex kadmind -@code{kadmind}. This option requires -@cindex cracklib -cracklib with the patch from -@code{ftp://ftp.pdc.kth.se/pub/krb/src/cracklib.patch}. - -@item @kbd{--with-dictpath=}@var{dictpath} -This is the dictionary that cracklib should use. - -@item @kbd{--with-socks=}@var{dir} -@cindex firewall -@cindex socks -If you have to traverse a firewall and it uses the SocksV5 protocol -(@cite{RFC 1928}), you can build with socks-support. Point @var{dir} to -the directory where you have socks5 installed. For more information -about socks see @kbd{http://www.socks.nec.com/}. - -@item @kbd{--with-readline=}@var{dir} -@cindex readline -To enable history/line editing in @code{ftp} and @code{kadmin}, any -present version of readline will be used. If you have readline -installed but in a place where configure does not managed to find it, -you can use this option. The code also looks for @code{libedit}. If -there is no library at all, the bundled version of @code{editline} will -be used. - -@item @kbd{--with-mailspool=}@var{dir} -The configuration process tries to determine where your machine stores -its incoming mail. This is typically @file{/usr/spool/mail} or -@file{/var/mail}. If it does not work or you store your mail in some -unusual directory, this option can be used to specify where the mail -spool directory is located. This directory is only accessed by -@pindex popper -@code{popper}, and the mail check in -@pindex login -@code{login}. - -@c @item @kbd{--enable-random-mkey} -@c Do not use this option unless you think you know what you are doing. - -@item @kbd{--with-mkey=}@var{file} -Put the master key here, the default is @file{/.k}. - -@item @kbd{--without-berkeley-db} -If you have -@cindex Berkeley DB -Berkeley DB installed, it is preferred over -@c XXX -dbm. If you already are running Kerberos this option might be useful, -since there currently isn't an easy way to convert a dbm database to a -db one (you have to dump the old database and then load it with the new -binaries). -@end table - -@node Installing a binary distribution, Finishing the installation, Installing from source, Installing programs -@comment node-name, next, previous, up -@section Installing a binary distribution - -The binary distribution is supposed to be installed in -@file{/usr/athena}, installing in some other place may work but is not -recommended. A symlink from @file{/usr/athena} to the install directory -should be fine. - -@node Finishing the installation, Authentication modules, Installing a binary distribution, Installing programs -@section Finishing the installation - -@pindex su -The only program that needs to be installed setuid to root is @code{su}. - -If -@pindex rlogin -@pindex rsh -@code{rlogin} and @code{rsh} are setuid to root they will fall back to -non-kerberised protocols if the kerberised ones fail for some -reason. The old protocols use reserved ports as security, and therefore -the programs have to be setuid to root. If you don't need this -functionality consider turning off the setuid bit. - -@pindex login -@code{login} does not have to be setuid, as it is always run by root -(users should use @code{su} rather than @code{login}). It will print a -helpful message when not setuid to root and run by a user. - -The programs intended to be run by users are located in -@file{/usr/athena/bin}. Inform your users to include -@file{/usr/athena/bin} in their paths, or copy or symlink the binaries -to some good place. The programs that you will want to use are: -@code{kauth}/@code{kinit}, -@pindex kauth -@pindex kinit -@code{klist}, @code{kdestroy}, @code{kpasswd}, @code{ftp}, -@pindex klist -@pindex kdestroy -@pindex kpasswd -@pindex ftp -@code{telnet}, @code{rcp}, @code{rsh}, @code{rlogin}, @code{su}, -@pindex telnet -@pindex rcp -@pindex rsh -@pindex rlogin -@pindex su -@pindex xnlock -@pindex afslog -@pindex pagsh -@pindex rxtelnet -@pindex tenletxr -@pindex rxterm -@code{rxtelnet}, @code{tenletxr}, @code{rxterm}, and -@code{xnlock}. If you are using AFS, @code{afslog} and @code{pagsh} -might also be useful. Administrators will want to use @code{kadmin} and -@code{ksrvutil}, which are located in @file{/usr/athena/sbin}. -@pindex kadmin -@pindex ksrvutil - -@code{telnetd} and @code{rlogind} assume that @code{login} is located in -@file{/usr/athena/bin} (or whatever path you used as -@samp{--prefix}). If for some reason you want to move @code{login}, you -will have to specify the new location with the @samp{-L} switch when -configuring -@pindex telnetd -telnetd -and -@pindex rlogind -rlogind -in @file{inetd.conf}. - -It should be possible to replace the system's default @code{login} with -the kerberised @code{login}. However some systems assume that login -performs some serious amount of magic that our login might not do (although -we've tried to do our best). So before replacing it on every machine, -try and see what happens. Another thing to try is to use one of the -authentication modules (@xref{Authentication modules}) supplied. - -The @code{login} program that we use was in an earlier life the standard -login program from NetBSD. In order to use it with a lot of weird -systems, it has been ``enhanced'' with features from many other logins -(Solaris, SunOS, IRIX, AIX, and others). Some of these features are -actually useful and you might want to use them even on other systems. - -@table @file -@item /etc/fbtab -@pindex fbtab -@itemx /etc/logindevperm -@pindex logindevperm -Allows you to chown some devices when a user logs in on a certain -terminal. Commonly used to change the ownership of @file{/dev/mouse}, -@file{/dev/kbd}, and other devices when someone logs in on -@file{/dev/console}. - -@file{/etc/fbtab} is the SunOS file name and it is tried first. If -there is no such file then the Solaris file name -@file{/etc/logindevperm} is tried. -@item /etc/environment -@pindex environment -This file specifies what environment variables should be set when a user -logs in. (AIX-style) -@item /etc/default/login -@pindex default/login -Almost the same as @file{/etc/environment}, but the System V style. -@item /etc/login.access -@pindex login.access -Can be used to control who is allowed to login from where and on what -ttys. (From Wietse Venema) -@end table - -@menu -* Authentication modules:: -@end menu - -@node Authentication modules, , Finishing the installation, Installing programs -@comment node-name, next, previous, up -@section Authentication modules -The problem of having different authentication mechanisms has been -recognised by several vendors, and several solutions has appeared. In -most cases these solutions involve some kind of shared modules that are -loaded at run-time. Modules for some of these systems can be found in -@file{lib/auth}. Presently there are modules for Digital's SIA, Linux' -PAM (might also work on Solaris, when PAM gets supported), and IRIX' -@code{login} and @code{xdm} (in @file{lib/auth/afskauthlib}). - -@menu -* Digital SIA:: -* IRIX:: -* PAM:: -@end menu - -@node Digital SIA, IRIX, Authentication modules, Authentication modules -@subsection Digital SIA - -To install the SIA module you will have to do the following: - -@itemize @bullet - -@item -Make sure @file{libsia_krb4.so} is available in -@file{/usr/athena/lib}. If @file{/usr/athena} is not on local disk, you -might want to put it in @file{/usr/shlib} or someplace else. If you do, -you'll have to edit @file{krb4_matrix.conf} to reflect the new location -(you will also have to do this if you installed in some other directory -than @file{/usr/athena}). -@item -Copy (your possibly edited) @file{krb4_matrix.conf} to @file{/etc/sia}. -@item -Apply @file{security.patch} to @file{/sbin/init.d/security}. -@item -Turn on KRB4 security by issuing @kbd{rcmgr set SECURITY KRB4} and -@kbd{rcmgr set KRB4_MATRIX_CONF krb4_matrix.conf}. -@item -Digital thinks you should reboot your machine, but that really shouldn't -be necessary. It's usually sufficient just to run -@kbd{/sbin/init.d/security start}. -@end itemize - -Users with local passwords (like @samp{root}) should be able to login -safely. - -When using Digital's xdm the @samp{KRBTKFILE} environment variable isn't -passed along as it should (since xdm zaps the environment). Instead you -have to set @samp{KRBTKFILE} to the correct value in -@file{/usr/lib/X11/xdm/Xsession}. Add a line similar to -@example -KRBTKFILE=/tmp/tkt`id -u`_`ps -o ppid= -p $$`; export KRBTKFILE -@end example - -There is currently no support for changing passwords. Use @file{kpasswd} -instead. - -@subsubheading Notes to users with Enhanced security - -Digital's @samp{ENHANCED} (C2) security, and Kerberos solves two -different problems. C2 deals with local security, adds better control of -who can do what, auditing, and similar things. Kerberos deals with -network security. - -To make C2 security work with Kerberos you will have to do the -following. - -@itemize @bullet -@item -Replace all occurencies of @file{krb4_matrix.conf} with -@file{krb4+c2_matrix.conf} in the directions above. -@item -You must enable ``vouching'' in the @samp{default} database. This will -make the OSFC2 module trust other SIA modules, so you can login without -giving your C2 password. To do this use @samp{edauth} to edit the -default entry @kbd{/usr/tcb/bin/edauth -dd default}, and add a -@samp{d_accept_alternate_vouching} capability, if not already present. -@item -For each user that does @emph{not} have a local C2 password, you should -set the password expiration field to zero. You can do this for each -user, or in the @samp{default} table. To to this use @samp{edauth} to -set (or change) the @samp{u_exp} capability to @samp{u_exp#0}. -@item -You should make sure that you use Digital's login rather than the one -distributed by us. The easiest way to do this is to replace -@file{/usr/athena/bin/login} with @file{/bin/login}. -@end itemize - -At present @samp{su} does not accept the vouching flag, so it will not -work as expected. - -Also, kerberised ftp will not work with C2 passwords. You can solve this -by using both Digital's ftpd and our on different ports. - -@strong{Remember}, if you do these changes you will get a system that -most certainly does @emph{not} fulfill the requirements of a C2 -system. If C2 is what you want, for instance if someone else is forcing -you to use it, you're out of luck. If you use enhanced security because -you want a system that is more secure than it would otherwise be, you -probably got an even more secure system. Passwords will not be sent in -the clear, for instance. - -@node IRIX, PAM, Digital SIA, Authentication modules -@subsection IRIX - -The IRIX support is a module that is compatible with Transarc's -@file{afskauthlib.so}. It should work with all programs that use this -library, this should include @file{login} and @file{xdm}. - -The interface is not very documented but it seems that you have to copy -@file{libkafs.so}, @file{libkrb.so}, and @file{libdes.so} to -@file{/usr/lib}, or build your @file{afskauthlib.so} statically. - -The @file{afskauthlib.so} itself is able to reside in -@file{/usr/vice/etc}, @file{/usr/afsws/lib}, or the current directory -(wherever that is). - -Appart from this it should ``just work'', there are no configuration -files. - -@node PAM, , IRIX, Authentication modules -@subsection PAM - -The PAM module was written more out of curiosity that anything else. It -has not been updated for quite a while, since none of us are using -Linux, and Solaris does not support PAM yet. We've had positive reports -from at least one person using the module, though. - -To use this module you should: - -@itemize @bullet -@item -Make sure @file{pam_krb4.so} is available in @file{/usr/athena/lib}. You -might actually want it on local disk, so @file{/lib/security} might be a -better place if @file{/usr/athena} is not local. -@item -Look at @file{pam.conf.add} for examples of what to add to -@file{/etc/pam.conf}. -@end itemize - -There is currently no support for changing kerberos passwords. Use -kpasswd instead. - -See also Derrick J Brashear's @code{<shadow@@dementia.org>} Kerberos PAM -module at @kbd{ftp://ftp.dementia.org/pub/pam}. It has a lot more -features, and it is also more in line with other PAM modules. |