diff options
Diffstat (limited to 'crypto/openssl/config')
| -rwxr-xr-x | crypto/openssl/config | 582 |
1 files changed, 0 insertions, 582 deletions
diff --git a/crypto/openssl/config b/crypto/openssl/config deleted file mode 100755 index 5337348703d0f..0000000000000 --- a/crypto/openssl/config +++ /dev/null @@ -1,582 +0,0 @@ -#!/bin/sh -# -# OpenSSL config: determine the operating system and run ./Configure -# -# "config -h" for usage information. -# -# this is a merge of minarch and GuessOS from the Apache Group. -# Originally written by Tim Hudson <tjh@cryptsoft.com>. - -# Original Apache Group comments on GuessOS - -# Simple OS/Platform guesser. Similar to config.guess but -# much, much smaller. Since it was developed for use with -# Apache, it follows under Apache's regular licensing -# with one specific addition: Any changes or additions -# to this script should be Emailed to the Apache -# group (apache@apache.org) in general and to -# Jim Jagielski (jim@jaguNET.com) in specific. -# -# Be as similar to the output of config.guess/config.sub -# as possible. - -# First get uname entries that we use below - -MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown" -RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown" -SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown" -VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown" - - -# Now test for ISC and SCO, since it is has a braindamaged uname. -# -# We need to work around FreeBSD 1.1.5.1 -( -XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'` -if [ "x$XREL" != "x" ]; then - if [ -f /etc/kconfig ]; then - case "$XREL" in - 4.0|4.1) - echo "${MACHINE}-whatever-isc4"; exit 0 - ;; - esac - else - case "$XREL" in - 3.2v4.2) - echo "whatever-whatever-sco3"; exit 0 - ;; - 3.2v5.0*) - echo "whatever-whatever-sco5"; exit 0 - ;; - 4.2MP) - if [ "x$VERSION" = "x2.1.1" ]; then - echo "${MACHINE}-whatever-unixware211"; exit 0 - elif [ "x$VERSION" = "x2.1.2" ]; then - echo "${MACHINE}-whatever-unixware212"; exit 0 - else - echo "${MACHINE}-whatever-unixware2"; exit 0 - fi - ;; - 4.2) - echo "whatever-whatever-unixware1"; exit 0 - ;; - 5) - if [ "`echo x$VERSION | sed -e 's/\..*//'`" = "x7" ]; then - echo "${MACHINE}-sco-unixware7"; exit 0 - fi - ;; - esac - fi -fi -# Now we simply scan though... In most cases, the SYSTEM info is enough -# -case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in - A/UX:*) - echo "m68k-apple-aux3"; exit 0 - ;; - - AIX:*) - echo "${MACHINE}-ibm-aix"; exit 0 - ;; - - dgux:*) - echo "${MACHINE}-dg-dgux"; exit 0 - ;; - - HI-UX:*) - echo "${MACHINE}-hi-hiux"; exit 0 - ;; - - HP-UX:*) - HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "$HPUXVER" in - 11.*) - echo "${MACHINE}-hp-hpux11"; exit 0 - ;; - 10.*) - echo "${MACHINE}-hp-hpux10"; exit 0 - ;; - *) - echo "${MACHINE}-hp-hpux"; exit 0 - ;; - esac - ;; - - IRIX:5.*) - echo "mips2-sgi-irix"; exit 0 - ;; - - IRIX:6.*) - echo "mips3-sgi-irix"; exit 0 - ;; - - IRIX64:*) - echo "mips4-sgi-irix64"; exit 0 - ;; - - Linux:[2-9].*) - echo "${MACHINE}-whatever-linux2"; exit 0 - ;; - - Linux:1.*) - echo "${MACHINE}-whatever-linux1"; exit 0 - ;; - - LynxOS:*) - echo "${MACHINE}-lynx-lynxos"; exit 0 - ;; - - BSD/OS:4.*) # BSD/OS always says 386 - echo "i486-whatever-bsdi4"; exit 0 - ;; - - BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*) - case `/sbin/sysctl -n hw.model` in - Pentium*) - echo "i586-whatever-bsdi"; exit 0 - ;; - *) - echo "i386-whatever-bsdi"; exit 0 - ;; - esac; - ;; - - BSD/386:*|BSD/OS:*) - echo "${MACHINE}-whatever-bsdi"; exit 0 - ;; - - FreeBSD:*) - VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'` - MACH=`sysctl -n hw.model` - ARCH='whatever' - case ${MACH} in - *386* ) MACH="i386" ;; - *486* ) MACH="i486" ;; - Pentium\ II*) MACH="i686" ;; - Pentium* ) MACH="i586" ;; - Alpha* ) MACH="alpha" ;; - * ) MACH="$MACHINE" ;; - esac - case ${MACH} in - i[0-9]86 ) ARCH="pc" ;; - esac - echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0 - ;; - - NetBSD:*:*:*386*) - echo "`sysctl -n hw.model | sed 's,.*\(.\)86-class.*,i\186,'`-whateve\r-netbsd"; exit 0 - ;; - - NetBSD:*) - echo "${MACHINE}-whatever-netbsd"; exit 0 - ;; - - OpenBSD:*) - echo "${MACHINE}-whatever-openbsd"; exit 0 - ;; - - OSF1:*:*:*alpha*) - echo "${MACHINE}-dec-osf"; exit 0 - ;; - - QNX:*) - case "$VERSION" in - 423) - echo "${MACHINE}-qssl-qnx32" - ;; - *) - echo "${MACHINE}-qssl-qnx" - ;; - esac - exit 0 - ;; - - Paragon*:*:*:*) - echo "i860-intel-osf1"; exit 0 - ;; - - Rhapsody:*) - echo "ppc-apple-rhapsody"; exit 0 - ;; - - SunOS:5.*) - echo "${MACHINE}-sun-solaris2"; exit 0 - ;; - - SunOS:*) - echo "${MACHINE}-sun-sunos4"; exit 0 - ;; - - UNIX_System_V:4.*:*) - echo "${MACHINE}-whatever-sysv4"; exit 0 - ;; - - *:4*:R4*:m88k) - echo "${MACHINE}-whatever-sysv4"; exit 0 - ;; - - DYNIX/ptx:4*:*) - echo "${MACHINE}-whatever-sysv4"; exit 0 - ;; - - *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*) - echo "i486-ncr-sysv4"; exit 0 - ;; - - ULTRIX:*) - echo "${MACHINE}-unknown-ultrix"; exit 0 - ;; - - SINIX*|ReliantUNIX*) - echo "${MACHINE}-siemens-sysv4"; exit 0 - ;; - - POSIX-BC*) - echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000" - ;; - - machten:*) - echo "${MACHINE}-tenon-${SYSTEM}"; exit 0; - ;; - - library:*) - echo "${MACHINE}-ncr-sysv4"; exit 0 - ;; - - ConvexOS:*:11.0:*) - echo "${MACHINE}-v11-${SYSTEM}"; exit 0; - ;; - -esac - -# -# Ugg. These are all we can determine by what we know about -# the output of uname. Be more creative: -# - -# Do the Apollo stuff first. Here, we just simply assume -# that the existance of the /usr/apollo directory is proof -# enough -if [ -d /usr/apollo ]; then - echo "whatever-apollo-whatever" - exit 0 -fi - -# Now NeXT -ISNEXT=`hostinfo 2>/dev/null` -case "$ISNEXT" in - *'NeXT Mach 3.3'*) - echo "whatever-next-nextstep3.3"; exit 0 - ;; - *NeXT*) - echo "whatever-next-nextstep"; exit 0 - ;; -esac - -# At this point we gone through all the one's -# we know of: Punt - -echo "${MACHINE}-whatever-${SYSTEM}" -exit 0 -) 2>/dev/null | ( - -# --------------------------------------------------------------------------- -# this is where the translation occurs into SSLeay terms -# --------------------------------------------------------------------------- - -PREFIX="" -SUFFIX="" -TEST="false" - -# pick up any command line args to config -for i -do -case "$i" in -# shared library support (behnke@trustcenter.de) --shared) SHARED=true;; --d*) PREFIX="debug-";; --t*) TEST="true";; --h*) TEST="true"; cat <<EOF -Usage: config [options] - -d Add a debug- prefix to machine choice. - -t Test mode, do not run the Configure perl script. - -h This help. - -Any other text will be passed to the Configure perl script. -See INSTALL for instructions. - -EOF -;; -*) options=$options" $i" ;; -esac -done - -# figure out if gcc is available and if so we use it otherwise -# we fallback to whatever cc does on the system -GCCVER=`(gcc --version) 2>/dev/null` -if [ "$GCCVER" != "" ]; then - CC=gcc - # then strip off whatever prefix Cygnus prepends the number with... - GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'` - # peak single digit before and after first dot, e.g. 2.95.1 gives 29 - GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'` -else - CC=cc -fi - -if [ "$SYSTEM" = "SunOS" ]; then - # check for WorkShop C, expected output is "cc: blah-blah C x.x" - CCVER=`(cc -V 2>&1) 2>/dev/null | \ - egrep -e '^cc: .* C [0-9]\.[0-9]' | \ - sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'` - CCVER=${CCVER:-0} - if [ $CCVER -gt 40 ]; then - CC=cc # overrides gcc!!! - if [ $CCVER -eq 50 ]; then - echo "WARNING! Detected WorkShop C 5.0. Do make sure you have" - echo " patch #107357-01 or later applied." - sleep 5 - fi - elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then - CC=sc3 - fi -fi - -if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then - # check for Compaq C, expected output is "blah-blah C Vx.x" - CCCVER=`(ccc -V 2>&1) 2>/dev/null | \ - egrep -e '.* C V[0-9]\.[0-9]' | \ - sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'` - CCCVER=${CCCVER:-0} - if [ $CCCVER -gt 60 ]; then - CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably - # only on hash routines and des, otherwise gcc (2.95) - # keeps along rather tight... - fi -fi - -GCCVER=${GCCVER:-0} -CCVER=${CCVER:-0} - -# read the output of the embedded GuessOS -read GUESSOS - -echo Operating system: $GUESSOS - -# now map the output into SSLeay terms ... really should hack into the -# script above so we end up with values in vars but that would take -# more time that I want to waste at the moment -case "$GUESSOS" in - mips2-sgi-irix) - CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` - CPU=${CPU:-0} - if [ $CPU -ge 4000 ]; then - options="$options -mips2" - fi - OUT="irix-$CC" - ;; - mips3-sgi-irix) - CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` - CPU=${CPU:-0} - if [ $CPU -ge 5000 ]; then - options="$options -mips4" - else - options="$options -mips3" - fi - OUT="irix-mips3-$CC" - ;; - mips4-sgi-irix64) - echo "WARNING! If you wish to build 64-bit library, then you have to" - echo " invoke './Configre irix64-mips4-$CC' *manually*." - echo " Type Ctrl-C if you don't want to continue." - read waste < /dev/tty - options="$options -mips4" - OUT="irix-mips3-$CC" - ;; - alpha-*-linux2) - ISA=`awk '/cpu model/{print$4}' /proc/cpuinfo` - case ${ISA:-generic} in - *[67]) OUT="linux-alpha+bwx-$CC" ;; - *) OUT="linux-alpha-$CC" ;; - esac - if [ "$CC" = "gcc" ]; then - case ${ISA:-generic} in - EV5|EV45) options="$options -mcpu=ev5";; - EV56|PCA56) options="$options -mcpu=ev56";; - EV6|EV67|PCA57) options="$options -mcpu=ev6";; - esac - fi - ;; - mips-*-linux?) OUT="linux-mips" ;; - ppc-*-linux2) OUT="linux-ppc" ;; - ia64-*-linux?) OUT="linux-ia64" ;; - ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;; - sparc64-*-linux2) - #Before we can uncomment following lines we have to wait at least - #till 64-bit glibc for SPARC is operational:-( - #echo "WARNING! If you wish to build 64-bit library, then you have to" - #echo " invoke './Configure linux64-sparcv9' *manually*." - #echo " Type Ctrl-C if you don't want to continue." - #read waste < /dev/tty - OUT="linux-sparcv9" ;; - sparc-*-linux2) - KARCH=`awk '/type/{print$3}' /proc/cpuinfo` - case ${KARCH:-sun4} in - sun4u*) OUT="linux-sparcv9" ;; - sun4m) OUT="linux-sparcv8" ;; - sun4d) OUT="linux-sparcv8" ;; - *) OUT="linux-sparcv7" ;; - esac ;; - *-*-linux2) OUT="linux-elf" ;; - *-*-linux1) OUT="linux-aout" ;; - sun4u*-sun-solaris2) - ISA64=`(isalist) 2>/dev/null | grep sparcv9` - if [ "$ISA64" != "" -a "$CC" = "cc" -a $CCVER -ge 50 ]; then - echo "WARNING! If you wish to build 64-bit library, then you have to" - echo " invoke './Configure solaris64-sparcv9-cc' *manually*." - echo " Type Ctrl-C if you don't want to continue." - read waste < /dev/tty - fi - OUT="solaris-sparcv9-$CC" ;; - sun4m-sun-solaris2) OUT="solaris-sparcv8-$CC" ;; - sun4d-sun-solaris2) OUT="solaris-sparcv8-$CC" ;; - sun4*-sun-solaris2) OUT="solaris-sparcv7-$CC" ;; - *86*-sun-solaris2) OUT="solaris-x86-$CC" ;; - *-*-sunos4) OUT="sunos-$CC" ;; - alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;; - *-freebsd[3-9]*) OUT="FreeBSD-elf" ;; - *-freebsd[1-2]*) OUT="FreeBSD" ;; - *86*-*-netbsd) OUT="NetBSD-x86" ;; - sun3*-*-netbsd) OUT="NetBSD-m68" ;; - *-*-netbsd) OUT="NetBSD-sparc" ;; - *86*-*-openbsd) OUT="OpenBSD-x86" ;; - alpha*-*-openbsd) OUT="OpenBSD-alpha" ;; - pmax*-*-openbsd) OUT="OpenBSD-mips" ;; - *-*-openbsd) OUT="OpenBSD" ;; - *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;; - *-*-osf) OUT="alpha-cc" ;; - *-*-unixware7) OUT="unixware-7" ;; - *-*-UnixWare7) OUT="unixware-7" ;; - *-*-Unixware7) OUT="unixware-7" ;; - *-*-unixware[1-2]*) OUT="unixware-2.0" ;; - *-*-UnixWare[1-2]*) OUT="unixware-2.0" ;; - *-*-Unixware[1-2]*) OUT="unixware-2.0" ;; - BS2000-siemens-sysv4) OUT="BS2000-OSD" ;; - RM*-siemens-sysv4) OUT="ReliantUNIX" ;; - *-siemens-sysv4) OUT="SINIX" ;; - *-hpux1*) OUT="hpux-parisc-$CC" - options="$options -D_REENTRANT" ;; - *-hpux) OUT="hpux-parisc-$CC" ;; - # these are all covered by the catchall below - # *-aix) OUT="aix-$CC" ;; - # *-dgux) OUT="dgux" ;; - *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; -esac - -# See whether we can compile Atalla support -if [ -f /usr/include/atasi.h ] -then - options="$options -DATALLA" -fi - -#get some basic shared lib support (behnke@trustcenter.de) -case "$OUT" in - solaris-*-gcc) - if [ "$SHARED" = "true" ] - then - options="$options -DPIC -fPIC" - fi - ;; -esac - -# gcc < 2.8 does not support -mcpu=ultrasparc -if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ] -then - echo "WARNING! Do consider upgrading to gcc-2.8 or later." - sleep 5 - OUT=solaris-sparcv9-gcc27 -fi -if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ] -then - echo "WARNING! Falling down to 'linux-sparcv8'." - echo " Upgrade to gcc-2.8 or later." - sleep 5 - OUT=linux-sparcv8 -fi -# To start with $OUT is never i86pc-sun-solaris2. Secondly why -# ban *all* assembler implementation if it can't stand only one, -# SHA-0 implementation. -#if [ "$OUT" = "i86pc-sun-solaris2" ] -#then -# ASM=`as -V /dev/null 2>&1` -# case "$ASM" in -# GNU*) ;; -# *) options="$options no-asm" ; echo "WARNING: You need the GNU assembler to use OpenSSL assembler code." ; echo "Sun as is not supported on Solaris x86." ;; -# esac -#fi - -case "$GUESSOS" in - i386-*) options="$options 386" ;; -esac - -for i in bf cast des dh dsa hmac md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha -do - if [ ! -d crypto/$i ] - then - options="$options no-$i" - fi -done - -if [ -z "$OUT" ]; then - OUT="$CC" -fi - -if [ ".$PERL" = . ] ; then - for i in . `echo $PATH | sed 's/:/ /g'`; do - if [ -f "$i/perl5" ] ; then - PERL="$i/perl5" - break; - fi; - done -fi - -if [ ".$PERL" = . ] ; then - for i in . `echo $PATH | sed 's/:/ /g'`; do - if [ -f "$i/perl" ] ; then - if "$i/perl" -e 'exit($]<5.0)'; then - PERL="$i/perl" - break; - fi; - fi; - done -fi - -if [ ".$PERL" = . ] ; then - echo "You need Perl 5." - exit 1 -fi - -# run Configure to check to see if we need to specify the -# compiler for the platform ... in which case we add it on -# the end ... otherwise we leave it off - -$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null -if [ $? = "0" ]; then - OUT="$OUT-$CC" -fi - -OUT="$PREFIX$OUT" - -$PERL ./Configure LIST | grep "$OUT" > /dev/null -if [ $? = "0" ]; then - echo Configuring for $OUT - - if [ "$TEST" = "true" ]; then - echo $PERL ./Configure $OUT $options - else - $PERL ./Configure $OUT $options - fi -else - echo "This system ($OUT) is not supported. See file INSTALL for details." -fi -) |