diff options
Diffstat (limited to 'src/arm/exynos4412-odroid-common.dtsi')
| -rw-r--r-- | src/arm/exynos4412-odroid-common.dtsi | 45 |
1 files changed, 28 insertions, 17 deletions
diff --git a/src/arm/exynos4412-odroid-common.dtsi b/src/arm/exynos4412-odroid-common.dtsi index ec7619a384a2b..8aa19ba144361 100644 --- a/src/arm/exynos4412-odroid-common.dtsi +++ b/src/arm/exynos4412-odroid-common.dtsi @@ -13,6 +13,7 @@ #include "exynos4412.dtsi" #include "exynos4412-ppmu-common.dtsi" #include <dt-bindings/gpio/gpio.h> +#include "exynos-mfc-reserved-memory.dtsi" / { chosen { @@ -162,26 +163,26 @@ /* RSTN signal for eMMC */ &sd1_cd { - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; &pinctrl_1 { gpio_power_key: power_key { samsung,pins = "gpx1-3"; - samsung,pin-pud = <0>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; }; max77686_irq: max77686-irq { samsung,pins = "gpx3-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; hdmi_hpd: hdmi-hpd { samsung,pins = "gpx3-7"; - samsung,pin-pud = <1>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; }; }; @@ -226,7 +227,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; vdd-supply = <&ldo8_reg>; @@ -297,7 +298,6 @@ regulator-name = "VDDQ_MMC2_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; regulator-boot-on; }; @@ -390,10 +390,18 @@ }; ldo21_reg: LDO21 { - regulator-name = "LDO21_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; + regulator-name = "TFLASH_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + }; + + ldo22_reg: LDO22 { + /* + * Only U3 uses it, so let it define the + * constraints + */ + regulator-name = "LDO22"; regulator-boot-on; }; @@ -460,9 +468,11 @@ }; buck8_reg: BUCK8 { + /* + * Constraints set by specific board: X, + * X2 and U3. + */ regulator-name = "BUCK8_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; }; }; }; @@ -506,7 +516,7 @@ &mshc_0 { pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; - vmmc-supply = <&ldo20_reg &buck8_reg>; + vmmc-supply = <&ldo20_reg>; mmc-pwrseq = <&emmc_pwrseq>; status = "okay"; @@ -530,7 +540,8 @@ bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; pinctrl-names = "default"; - vmmc-supply = <&ldo4_reg &ldo21_reg>; + vmmc-supply = <&ldo21_reg>; + vqmmc-supply = <&ldo4_reg>; cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>; cd-inverted; status = "okay"; |