diff options
Diffstat (limited to 'src/arm/ste-hrefv60plus.dtsi')
| -rw-r--r-- | src/arm/ste-hrefv60plus.dtsi | 41 |
1 files changed, 22 insertions, 19 deletions
diff --git a/src/arm/ste-hrefv60plus.dtsi b/src/arm/ste-hrefv60plus.dtsi index a4bc9e77d640d..149a72e7e37aa 100644 --- a/src/arm/ste-hrefv60plus.dtsi +++ b/src/arm/ste-hrefv60plus.dtsi @@ -43,15 +43,25 @@ <&vaudio_hf_hrefv60_mode>, <&gbf_hrefv60_mode>, <&hdtv_hrefv60_mode>, - <&touch_hrefv60_mode>; + <&gpios_hrefv60_mode>; sdi0 { - /* SD card detect GPIO pin, extend default state */ sdi0_default_mode: sdi0_default { + /* SD card detect GPIO pin, extend default state */ default_hrefv60_cfg1 { pins = "GPIO95_E8"; ste,config = <&gpio_in_pu>; }; + /* VMMCI level-shifter enable */ + default_hrefv60_cfg2 { + pins = "GPIO169_D22"; + ste,config = <&gpio_out_hi>; + }; + /* VMMCI level-shifter voltage select */ + default_hrefv60_cfg3 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; }; }; ipgpio { @@ -179,23 +189,6 @@ }; }; }; - touch { - touch_hrefv60_mode: touch_hrefv60 { - /* - * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and - * GPIO 67 for interrupts. Pull-up the IRQ line and drive both - * reset signals low. - */ - hrefv60_cfg1 { - pins = "GPIO143_D12", "GPIO146_D13"; - ste,config = <&gpio_out_lo>; - }; - hrefv60_cfg2 { - pins = "GPIO67_G2"; - ste,config = <&gpio_in_pu>; - }; - }; - }; mcde { lcd_hrefv60_mode: lcd_hrefv60 { /* @@ -213,6 +206,16 @@ }; }; }; + gpios { + /* Dangling GPIO pins */ + gpios_hrefv60_mode: gpios_hrefv60 { + default_cfg1 { + /* Normally UART1 RXD, now dangling */ + pins = "GPIO4_AH6"; + ste,config = <&in_pu>; + }; + }; + }; }; }; }; |