diff options
Diffstat (limited to 'sys/dev/fe/if_fe_isa.c')
| -rw-r--r-- | sys/dev/fe/if_fe_isa.c | 42 |
1 files changed, 21 insertions, 21 deletions
diff --git a/sys/dev/fe/if_fe_isa.c b/sys/dev/fe/if_fe_isa.c index 63722910fcaee..3c37575a40d9d 100644 --- a/sys/dev/fe/if_fe_isa.c +++ b/sys/dev/fe/if_fe_isa.c @@ -251,8 +251,8 @@ fe_probe_fmv(device_t dev) /* Get our station address from EEPROM, and make sure it is Fujitsu's. */ - fe_inblk(sc, FE_FMV4, sc->sc_enaddr, ETHER_ADDR_LEN); - if (!fe_valid_Ether_p(sc->sc_enaddr, 0x00000E)) + fe_inblk(sc, FE_FMV4, sc->enaddr, ETHER_ADDR_LEN); + if (!fe_valid_Ether_p(sc->enaddr, 0x00000E)) return ENXIO; /* Find the supported media and "hardware revision" to know @@ -386,8 +386,8 @@ fe_probe_jli_ati(struct fe_softc * sc, u_char const * eeprom) /* Get our station address from EEPROM, and make sure the EEPROM contains ATI's address. */ - bcopy(eeprom + 8, sc->sc_enaddr, ETHER_ADDR_LEN); - if (!fe_valid_Ether_p(sc->sc_enaddr, 0x0000F4)) + bcopy(eeprom + 8, sc->enaddr, ETHER_ADDR_LEN); + if (!fe_valid_Ether_p(sc->enaddr, 0x0000F4)) return NULL; /* @@ -515,10 +515,10 @@ fe_probe_jli_icl(struct fe_softc * sc, u_char const * eeprom) valid. Use it if it is, or use the "permanent" address instead. */ if (fe_valid_Ether_p(eeprom+4, 0x020000)) { /* The configured address is valid. Use it. */ - bcopy(eeprom+4, sc->sc_enaddr, ETHER_ADDR_LEN); + bcopy(eeprom+4, sc->enaddr, ETHER_ADDR_LEN); } else { /* The configured address is invalid. Use permanent. */ - bcopy(eeprom+122, sc->sc_enaddr, ETHER_ADDR_LEN); + bcopy(eeprom+122, sc->enaddr, ETHER_ADDR_LEN); } /* Determine model and supported media. */ @@ -613,15 +613,15 @@ fe_probe_jli_rex(struct fe_softc * sc, u_char const * eeprom) /* Get our station address from EEPROM. Note that RATOC stores it "byte-swapped" in each word. (I don't know why.) So, we just can't use bcopy().*/ - sc->sc_enaddr[0] = eeprom[3]; - sc->sc_enaddr[1] = eeprom[2]; - sc->sc_enaddr[2] = eeprom[5]; - sc->sc_enaddr[3] = eeprom[4]; - sc->sc_enaddr[4] = eeprom[7]; - sc->sc_enaddr[5] = eeprom[6]; + sc->enaddr[0] = eeprom[3]; + sc->enaddr[1] = eeprom[2]; + sc->enaddr[2] = eeprom[5]; + sc->enaddr[3] = eeprom[4]; + sc->enaddr[4] = eeprom[7]; + sc->enaddr[5] = eeprom[6]; /* Make sure the EEPROM contains RATOC's station address. */ - if (!fe_valid_Ether_p(sc->sc_enaddr, 0x00C0D0)) + if (!fe_valid_Ether_p(sc->enaddr, 0x00C0D0)) return NULL; /* I don't know any sub-model identification. */ @@ -667,7 +667,7 @@ fe_probe_jli_unk(struct fe_softc * sc, u_char const * eeprom) return NULL; /* Extract our (guessed) station address. */ - bcopy(eeprom+n, sc->sc_enaddr, ETHER_ADDR_LEN); + bcopy(eeprom+n, sc->enaddr, ETHER_ADDR_LEN); /* We are not sure what type of board it is... */ sc->type = FE_TYPE_JLI; @@ -841,7 +841,7 @@ fe_probe_ssi(device_t dev) /* Make sure the Ethernet (MAC) station address is of TDK's. */ if (!fe_valid_Ether_p(eeprom+FE_SSI_EEP_ADDR, 0x008098)) return ENXIO; - bcopy(eeprom + FE_SSI_EEP_ADDR, sc->sc_enaddr, ETHER_ADDR_LEN); + bcopy(eeprom + FE_SSI_EEP_ADDR, sc->enaddr, ETHER_ADDR_LEN); /* This looks like a TDK-AX031 board. It requires an explicit IRQ setting in config, since we currently don't know how we @@ -902,7 +902,7 @@ fe_probe_lnx(device_t dev) /* Make sure the Ethernet (MAC) station address is of TDK/LANX's. */ if (!fe_valid_Ether_p(eeprom, 0x008098)) return ENXIO; - bcopy(eeprom, sc->sc_enaddr, ETHER_ADDR_LEN); + bcopy(eeprom, sc->enaddr, ETHER_ADDR_LEN); /* This looks like a TDK/LANX board. It requires an explicit IRQ setting in config. Make sure we have one, @@ -962,10 +962,10 @@ fe_probe_gwy(device_t dev) return ENXIO; /* Get our station address from EEPROM. */ - fe_inblk(sc, 0x18, sc->sc_enaddr, ETHER_ADDR_LEN); + fe_inblk(sc, 0x18, sc->enaddr, ETHER_ADDR_LEN); /* Make sure it is Gateway Communication's. */ - if (!fe_valid_Ether_p(sc->sc_enaddr, 0x000061)) + if (!fe_valid_Ether_p(sc->enaddr, 0x000061)) return ENXIO; /* Gateway's board requires an explicit IRQ to work, since it @@ -1016,14 +1016,14 @@ fe_probe_ubn(device_t dev) return ENXIO; /* Get our station address form ID ROM and make sure it is UBN's. */ - fe_inblk(sc, 0x18, sc->sc_enaddr, ETHER_ADDR_LEN); - if (!fe_valid_Ether_p(sc->sc_enaddr, 0x00DD01)) + fe_inblk(sc, 0x18, sc->enaddr, ETHER_ADDR_LEN); + if (!fe_valid_Ether_p(sc->enaddr, 0x00DD01)) return ENXIO; #if 0 /* Calculate checksum. */ sum = fe_inb(sc, 0x1e); for (i = 0; i < ETHER_ADDR_LEN; i++) { - sum ^= sc->sc_enaddr[i]; + sum ^= sc->enaddr[i]; } if (sum != 0) return ENXIO; |