diff options
Diffstat (limited to 'sys/dev/mly/mly_tables.h')
| -rw-r--r-- | sys/dev/mly/mly_tables.h | 335 |
1 files changed, 0 insertions, 335 deletions
diff --git a/sys/dev/mly/mly_tables.h b/sys/dev/mly/mly_tables.h deleted file mode 100644 index 5a83f1767353e..0000000000000 --- a/sys/dev/mly/mly_tables.h +++ /dev/null @@ -1,335 +0,0 @@ -/*- - * Copyright (c) 2000 Michael Smith - * Copyright (c) 2000 BSDi - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD$ - */ - -/* - * Lookup table for code-to-text translations. - */ -struct mly_code_lookup { - char *string; - u_int32_t code; -}; - -extern char *mly_describe_code(struct mly_code_lookup *table, u_int32_t code); - -#ifndef MLY_DEFINE_TABLES -extern struct mly_code_lookup mly_table_bustype[]; -extern struct mly_code_lookup mly_table_controllertype[]; -extern struct mly_code_lookup mly_table_oemname[]; -extern struct mly_code_lookup mly_table_memorytype[]; -extern struct mly_code_lookup mly_table_cputype[]; -extern struct mly_code_lookup mly_table_event[]; -extern struct mly_code_lookup mly_table_device_state[]; -extern struct mly_code_lookup mly_table_device_type[]; -extern struct mly_code_lookup mly_table_stripe_size[]; -extern struct mly_code_lookup mly_table_cacheline_size[]; - -#else /* MLY_DEFINE_TABLES */ - -/******************************************************************************** - * Look up a text description of a numeric code and return a pointer to same. - */ -char * -mly_describe_code(struct mly_code_lookup *table, u_int32_t code) -{ - int i; - - for (i = 0; table[i].string != NULL; i++) - if (table[i].code == code) - return(table[i].string); - return(table[i+1].string); -} - -struct mly_code_lookup mly_table_bustype[] = { - {"SCSI", 0x00}, - {"FC-AL", 0x01}, - {"PCI", 0x03}, - {NULL, 0}, - {"unknown bus", 0} -}; - -struct mly_code_lookup mly_table_controllertype[] = { -#if 0 /* not supported by this driver */ - {"DAC960E", 0x01}, /* EISA */ - {"DAC960M", 0x08}, /* MCA */ - {"DAC960PD", 0x10}, /* PCI Dual */ - {"DAC960PL", 0x11}, /* PCU low-cost */ - {"DAC960PDU", 0x12}, /* PD Ultra */ - {"DAC960PE", 0x13}, /* Peregrine low-cost */ - {"DAC960PG", 0x14}, /* Peregrine high-performance */ - {"DAC960PJ", 0x15}, /* Road Runner */ - {"DAC960PTL0", 0x16}, /* Jaguar */ - {"DAC960PR", 0x17}, /* Road Runner (again?) */ - {"DAC960PRL", 0x18}, /* Tomcat */ - {"DAC960PT", 0x19}, /* Road Runner (yet again?) */ - {"DAC1164P", 0x1a}, /* Little Apple */ - {"DAC960PTL1", 0x1b}, /* Jaguar+ */ -#endif - {"EXR2000P", 0x1c}, /* Big Apple */ - {"EXR3000P", 0x1d}, /* Fibre Apple */ - {"AcceleRAID 352", 0x1e}, /* Leopard */ - {"AcceleRAID 170", 0x1f}, /* Lynx */ - {"AcceleRAID 160", 0x20}, /* Bobcat */ - {NULL, 0}, - {"unknown adapter", 0} -}; - -struct mly_code_lookup mly_table_oemname[] = { - {"Mylex", MLY_OEM_MYLEX}, - {"IBM", MLY_OEM_IBM}, - {"Hewlett-Packard", MLY_OEM_HP}, - {"DEC/Compaq", MLY_OEM_DEC}, - {"Siemens", MLY_OEM_SIEMENS}, - {"Intel", MLY_OEM_INTEL}, - {NULL, 0}, - {"unknown OEM", 0} -}; - -struct mly_code_lookup mly_table_memorytype[] = { - {"DRAM", 0x01}, - {"EDRAM", 0x02}, - {"EDO RAM", 0x03}, - {"SDRAM", 0x04}, - {NULL, 0}, - {"unknown memory", 0} -}; - -struct mly_code_lookup mly_table_cputype[] = { - {"i960CA", 0x01}, - {"i960RD", 0x02}, - {"i960RN", 0x03}, - {"i960RP", 0x04}, - {"NorthBay(?)", 0x05}, - {"StrongArm", 0x06}, - {"i960RM", 0x07}, - {NULL, 0}, - {"unknown CPU", 0} -}; - -/* - * This table is directly derived from the corresponding table in the - * Linux driver, and uses a derivative encoding for simplicity's sake. - * - * The first character of the string determines the format of the message. - * - * p "physical device <channel>:<target> <text>" (physical device status) - * s "physical device <channel>:<target> <text>" (scsi message or error) - * " sense key <key> asc <asc> ascq <ascq>" - * " info <info> csi <csi>" - * l "logical drive <unit>: <text>" (logical device status) - * m "logical drive <unit>: <text>" (logical device message) - * - * Messages which are typically suppressed have the first character capitalised. - * These messages will only be printed if bootverbose is set. - * - * The second character in the string indicates an action to be taken as a - * result of the event. - * - * r rescan the device for possible state change - * - */ -struct mly_code_lookup mly_table_event[] = { - /* physical device events (0x0000 - 0x007f) */ - {"pr online", 0x0001}, - {"pr standby", 0x0002}, - {"p automatic rebuild started", 0x0005}, - {"p manual rebuild started", 0x0006}, - {"pr rebuild completed", 0x0007}, - {"pr rebuild cancelled", 0x0008}, - {"pr rebuild failed for unknown reasons", 0x0009}, - {"pr rebuild failed due to new physical device", 0x000a}, - {"pr rebuild failed due to logical drive failure", 0x000b}, - {"sr offline", 0x000c}, - {"pr found", 0x000d}, - {"pr gone", 0x000e}, - {"p unconfigured", 0x000f}, - {"p expand capacity started", 0x0010}, - {"pr expand capacity completed", 0x0011}, - {"pr expand capacity failed", 0x0012}, - {"p parity error", 0x0016}, - {"p soft error", 0x0017}, - {"p miscellaneous error", 0x0018}, - {"p reset", 0x0019}, - {"p active spare found", 0x001a}, - {"p warm spare found", 0x001b}, - {"s sense data received", 0x001c}, - {"p initialization started", 0x001d}, - {"pr initialization completed", 0x001e}, - {"pr initialization failed", 0x001f}, - {"pr initialization cancelled", 0x0020}, - {"P write recovery failed", 0x0021}, - {"p scsi bus reset failed", 0x0022}, - {"p double check condition", 0x0023}, - {"p device cannot be accessed", 0x0024}, - {"p gross error on scsi processor", 0x0025}, - {"p bad tag from device", 0x0026}, - {"p command timeout", 0x0027}, - {"pr system reset", 0x0028}, - {"p busy status or parity error", 0x0029}, - {"pr host set device to failed state", 0x002a}, - {"pr selection timeout", 0x002b}, - {"p scsi bus phase error", 0x002c}, - {"pr device returned unknown status", 0x002d}, - {"pr device not ready", 0x002e}, - {"p device not found at startup", 0x002f}, - {"p COD write operation failed", 0x0030}, - {"p BDT write operation failed", 0x0031}, - {"p missing at startup", 0x0039}, - {"p start rebuild failed due to physical drive too small", 0x003a}, - /* logical device events (0x0080 - 0x00ff) */ - {"m consistency check started", 0x0080}, - {"mr consistency check completed", 0x0081}, - {"mr consistency check cancelled", 0x0082}, - {"mr consistency check completed with errors", 0x0083}, - {"mr consistency check failed due to logical drive failure", 0x0084}, - {"mr consistency check failed due to physical device failure", 0x0085}, - {"lr offline", 0x0086}, - {"lr critical", 0x0087}, - {"lr online", 0x0088}, - {"m automatic rebuild started", 0x0089}, - {"m manual rebuild started", 0x008a}, - {"mr rebuild completed", 0x008b}, - {"mr rebuild cancelled", 0x008c}, - {"mr rebuild failed for unknown reasons", 0x008d}, - {"mr rebuild failed due to new physical device", 0x008e}, - {"mr rebuild failed due to logical drive failure", 0x008f}, - {"l initialization started", 0x0090}, - {"lr initialization completed", 0x0091}, - {"lr initialization cancelled", 0x0092}, - {"lr initialization failed", 0x0093}, - {"lr found", 0x0094}, - {"lr gone", 0x0095}, - {"l expand capacity started", 0x0096}, - {"lr expand capacity completed", 0x0097}, - {"lr expand capacity failed", 0x0098}, - {"l bad block found", 0x0099}, - {"lr size changed", 0x009a}, - {"lr type changed", 0x009b}, - {"l bad data block found", 0x009c}, - {"l read of data block in bdt", 0x009e}, - {"l write back data for disk block lost", 0x009f}, - /* enclosure management events (0x0100 - 0x017f) */ - {"e enclosure %d fan %d failed", 0x0140}, - {"e enclosure %d fan %d ok", 0x0141}, - {"e enclosure %d fan %d not present", 0x0142}, - {"e enclosure %d power supply %d failed", 0x0143}, - {"e enclosure %d power supply %d ok", 0x0144}, - {"e enclosure %d power supply %d not present", 0x0145}, - {"e enclosure %d temperature sensor %d failed", 0x0146}, - {"e enclosure %d temperature sensor %d critical", 0x0147}, - {"e enclosure %d temperature sensor %d ok", 0x0148}, - {"e enclosure %d temperature sensor %d not present", 0x0149}, - {"e enclosure %d unit %d access critical", 0x014a}, - {"e enclosure %d unit %d access ok", 0x014b}, - {"e enclosure %d unit %d access offline", 0x014c}, - /* controller events (0x0180 - 0x01ff) */ - {"c cache write back error", 0x0181}, - {"c battery backup unit found", 0x0188}, - {"c battery backup unit charge level low", 0x0189}, - {"c battery backup unit charge level ok", 0x018a}, - {"c installation aborted", 0x0193}, - {"c mirror race recovery in progress", 0x0195}, - {"c mirror race on critical drive", 0x0196}, - {"c memory soft ecc error", 0x019e}, - {"c memory hard ecc error", 0x019f}, - {"c battery backup unit failed", 0x01a2}, - {NULL, 0}, - {"? unknown event code", 0} -}; - -/* - * Values here must be 16 characters or less, as they are packed into - * the 'product' field in the SCSI inquiry data. - */ -struct mly_code_lookup mly_table_device_state[] = { - {"offline", MLY_DEVICE_STATE_OFFLINE}, - {"unconfigured", MLY_DEVICE_STATE_UNCONFIGURED}, - {"online", MLY_DEVICE_STATE_ONLINE}, - {"critical", MLY_DEVICE_STATE_CRITICAL}, - {"writeonly", MLY_DEVICE_STATE_WRITEONLY}, - {"standby", MLY_DEVICE_STATE_STANDBY}, - {"missing", MLY_DEVICE_STATE_MISSING}, - {NULL, 0}, - {"unknown state", 0} -}; - -/* - * Values here must be 8 characters or less, as they are packed into - * the 'vendor' field in the SCSI inquiry data. - */ -struct mly_code_lookup mly_table_device_type[] = { - {"RAID 0", MLY_DEVICE_TYPE_RAID0}, - {"RAID 1", MLY_DEVICE_TYPE_RAID1}, - {"RAID 3", MLY_DEVICE_TYPE_RAID3}, /* right asymmetric parity */ - {"RAID 5", MLY_DEVICE_TYPE_RAID5}, /* right asymmetric parity */ - {"RAID 6", MLY_DEVICE_TYPE_RAID6}, /* Mylex RAID 6 */ - {"RAID 7", MLY_DEVICE_TYPE_RAID7}, /* JBOD */ - {"SPAN", MLY_DEVICE_TYPE_NEWSPAN}, /* New Mylex SPAN */ - {"RAID 3", MLY_DEVICE_TYPE_RAID3F}, /* fixed parity */ - {"RAID 3", MLY_DEVICE_TYPE_RAID3L}, /* left symmetric parity */ - {"SPAN", MLY_DEVICE_TYPE_SPAN}, /* current spanning implementation */ - {"RAID 5", MLY_DEVICE_TYPE_RAID5L}, /* left symmetric parity */ - {"RAID E", MLY_DEVICE_TYPE_RAIDE}, /* concatenation */ - {"PHYSICAL", MLY_DEVICE_TYPE_PHYSICAL}, /* physical device */ - {NULL, 0}, - {"UNKNOWN", 0} -}; - -struct mly_code_lookup mly_table_stripe_size[] = { - {"NONE", MLY_STRIPE_ZERO}, - {"512B", MLY_STRIPE_512b}, - {"1k", MLY_STRIPE_1k}, - {"2k", MLY_STRIPE_2k}, - {"4k", MLY_STRIPE_4k}, - {"8k", MLY_STRIPE_8k}, - {"16k", MLY_STRIPE_16k}, - {"32k", MLY_STRIPE_32k}, - {"64k", MLY_STRIPE_64k}, - {"128k", MLY_STRIPE_128k}, - {"256k", MLY_STRIPE_256k}, - {"512k", MLY_STRIPE_512k}, - {"1M", MLY_STRIPE_1m}, - {NULL, 0}, - {"unknown", 0} -}; - -struct mly_code_lookup mly_table_cacheline_size[] = { - {"NONE", MLY_CACHELINE_ZERO}, - {"512B", MLY_CACHELINE_512b}, - {"1k", MLY_CACHELINE_1k}, - {"2k", MLY_CACHELINE_2k}, - {"4k", MLY_CACHELINE_4k}, - {"8k", MLY_CACHELINE_8k}, - {"16k", MLY_CACHELINE_16k}, - {"32k", MLY_CACHELINE_32k}, - {"64k", MLY_CACHELINE_64k}, - {NULL, 0}, - {"unknown", 0} -}; - -#endif /* MLY_DEFINE_TABLES */ |