summaryrefslogtreecommitdiff
path: root/sys/dev/ray/if_raymib.h
diff options
context:
space:
mode:
Diffstat (limited to 'sys/dev/ray/if_raymib.h')
-rw-r--r--sys/dev/ray/if_raymib.h1100
1 files changed, 0 insertions, 1100 deletions
diff --git a/sys/dev/ray/if_raymib.h b/sys/dev/ray/if_raymib.h
deleted file mode 100644
index 77297869b9e27..0000000000000
--- a/sys/dev/ray/if_raymib.h
+++ /dev/null
@@ -1,1100 +0,0 @@
-/*
- * Copyright (C) 2000
- * Dr. Duncan McLennan Barclay, dmlb@ragnet.demon.co.uk.
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the author nor the names of any co-contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY DUNCAN BARCLAY AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL DUNCAN BARCLAY OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD$
- *
- */
-
-/*
- * Bit mask definitions for firmware versioning
- */
-#define RAY_V4 0x1
-#define RAY_V5 0x2
-
-/*
- * MIB stuctures
- */
-struct ray_mib_common_head { /*Offset*/ /*Size*/
- u_int8_t mib_net_type; /*00*/
- u_int8_t mib_ap_status; /*01*/
- u_int8_t mib_ssid[IEEE80211_NWID_LEN]; /*02*/ /*20*/
- u_int8_t mib_scan_mode; /*22*/
- u_int8_t mib_apm_mode; /*23*/
- u_int8_t mib_mac_addr[ETHER_ADDR_LEN]; /*24*/ /*06*/
- u_int8_t mib_frag_thresh[2]; /*2a*/ /*02*/
- u_int8_t mib_dwell_time[2]; /*2c*/ /*02*/
- u_int8_t mib_beacon_period[2]; /*2e*/ /*02*/
- u_int8_t mib_dtim_interval; /*30*/
- u_int8_t mib_max_retry; /*31*/
- u_int8_t mib_ack_timo; /*32*/
- u_int8_t mib_sifs; /*33*/
- u_int8_t mib_difs; /*34*/
- u_int8_t mib_pifs; /*35*/
- u_int8_t mib_rts_thresh[2]; /*36*/ /*02*/
- u_int8_t mib_scan_dwell[2]; /*38*/ /*02*/
- u_int8_t mib_scan_max_dwell[2]; /*3a*/ /*02*/
- u_int8_t mib_assoc_timo; /*3c*/
- u_int8_t mib_adhoc_scan_cycle; /*3d*/
- u_int8_t mib_infra_scan_cycle; /*3e*/
- u_int8_t mib_infra_super_scan_cycle; /*3f*/
- u_int8_t mib_promisc; /*40*/
- u_int8_t mib_uniq_word[2]; /*41*/ /*02*/
- u_int8_t mib_slot_time; /*43*/
- u_int8_t mib_roam_low_snr_thresh; /*44*/
- u_int8_t mib_low_snr_count; /*45*/
- u_int8_t mib_infra_missed_beacon_count; /*46*/
- u_int8_t mib_adhoc_missed_beacon_count; /*47*/
- u_int8_t mib_country_code; /*48*/
- u_int8_t mib_hop_seq; /*49*/
- u_int8_t mib_hop_seq_len; /*4a*/
-} __attribute__((__packed__));
-
-struct ray_mib_common_tail {
- u_int8_t mib_noise_filter_gain; /*00*/
- u_int8_t mib_noise_limit_offset; /*01*/
- u_int8_t mib_rssi_thresh_offset; /*02*/
- u_int8_t mib_busy_thresh_offset; /*03*/
- u_int8_t mib_sync_thresh; /*04*/
- u_int8_t mib_test_mode; /*05*/
- u_int8_t mib_test_min_chan; /*06*/
- u_int8_t mib_test_max_chan; /*07*/
-} __attribute__((__packed__));
-
-struct ray_mib_4 {
- struct ray_mib_common_head mib_head; /*00*/
- u_int8_t mib_cw_max; /*4b*/
- u_int8_t mib_cw_min; /*4c*/
- struct ray_mib_common_tail mib_tail; /*4d*/
-} __attribute__((__packed__));
-
-struct ray_mib_5 {
- struct ray_mib_common_head mib_head; /*00*/
- u_int8_t mib_cw_max[2]; /*4b*/ /*02*/
- u_int8_t mib_cw_min[2]; /*4d*/ /*02*/
- struct ray_mib_common_tail mib_tail; /*4f*/
- u_int8_t mib_allow_probe_resp; /*57*/
- u_int8_t mib_privacy_must_start; /*58*/
- u_int8_t mib_privacy_can_join; /*59*/
- u_int8_t mib_basic_rate_set[8]; /*5a*/ /*08*/
-} __attribute__((__packed__));
-
-#define mib_net_type mib_head.mib_net_type
-#define mib_ap_status mib_head.mib_ap_status
-#define mib_ssid mib_head.mib_ssid
-#define mib_scan_mode mib_head.mib_scan_mode
-#define mib_apm_mode mib_head.mib_apm_mode
-#define mib_mac_addr mib_head.mib_mac_addr
-#define mib_frag_thresh mib_head.mib_frag_thresh
-#define mib_dwell_time mib_head.mib_dwell_time
-#define mib_beacon_period mib_head.mib_beacon_period
-#define mib_dtim_interval mib_head.mib_dtim_interval
-#define mib_max_retry mib_head.mib_max_retry
-#define mib_ack_timo mib_head.mib_ack_timo
-#define mib_sifs mib_head.mib_sifs
-#define mib_difs mib_head.mib_difs
-#define mib_pifs mib_head.mib_pifs
-#define mib_rts_thresh mib_head.mib_rts_thresh
-#define mib_scan_dwell mib_head.mib_scan_dwell
-#define mib_scan_max_dwell mib_head.mib_scan_max_dwell
-#define mib_assoc_timo mib_head.mib_assoc_timo
-#define mib_adhoc_scan_cycle mib_head.mib_adhoc_scan_cycle
-#define mib_infra_scan_cycle mib_head.mib_infra_scan_cycle
-#define mib_infra_super_scan_cycle \
- mib_head.mib_infra_super_scan_cycle
-#define mib_promisc mib_head.mib_promisc
-#define mib_uniq_word mib_head.mib_uniq_word
-#define mib_slot_time mib_head.mib_slot_time
-#define mib_roam_low_snr_thresh mib_head.mib_roam_low_snr_thresh
-#define mib_low_snr_count mib_head.mib_low_snr_count
-#define mib_infra_missed_beacon_count \
- mib_head.mib_infra_missed_beacon_count
-#define mib_adhoc_missed_beacon_count \
- mib_head.mib_adhoc_missed_beacon_count
-#define mib_country_code mib_head.mib_country_code
-#define mib_hop_seq mib_head.mib_hop_seq
-#define mib_hop_seq_len mib_head.mib_hop_seq_len
-
-#define mib_noise_filter_gain mib_tail.mib_noise_filter_gain
-#define mib_noise_limit_offset mib_tail.mib_noise_limit_offset
-#define mib_rssi_thresh_offset mib_tail.mib_rssi_thresh_offset
-#define mib_busy_thresh_offset mib_tail.mib_busy_thresh_offset
-#define mib_sync_thresh mib_tail.mib_sync_thresh
-#define mib_test_mode mib_tail.mib_test_mode
-#define mib_test_min_chan mib_tail.mib_test_min_chan
-#define mib_test_max_chan mib_tail.mib_test_max_chan
-
-/*
- * MIB IDs for the update/report param commands
- */
-#define RAY_MIB_NET_TYPE 0
-#define RAY_MIB_AP_STATUS 1
-#define RAY_MIB_SSID 2
-#define RAY_MIB_SCAN_MODE 3
-#define RAY_MIB_APM_MODE 4
-#define RAY_MIB_MAC_ADDR 5
-#define RAY_MIB_FRAG_THRESH 6
-#define RAY_MIB_DWELL_TIME 7
-#define RAY_MIB_BEACON_PERIOD 8
-#define RAY_MIB_DTIM_INTERVAL 9
-#define RAY_MIB_MAX_RETRY 10
-#define RAY_MIB_ACK_TIMO 11
-#define RAY_MIB_SIFS 12
-#define RAY_MIB_DIFS 13
-#define RAY_MIB_PIFS 14
-#define RAY_MIB_RTS_THRESH 15
-#define RAY_MIB_SCAN_DWELL 16
-#define RAY_MIB_SCAN_MAX_DWELL 17
-#define RAY_MIB_ASSOC_TIMO 18
-#define RAY_MIB_ADHOC_SCAN_CYCLE 19
-#define RAY_MIB_INFRA_SCAN_CYCLE 20
-#define RAY_MIB_INFRA_SUPER_SCAN_CYCLE 21
-#define RAY_MIB_PROMISC 22
-#define RAY_MIB_UNIQ_WORD 23
-#define RAY_MIB_SLOT_TIME 24
-#define RAY_MIB_ROAM_LOW_SNR_THRESH 25
-#define RAY_MIB_LOW_SNR_COUNT 26
-#define RAY_MIB_INFRA_MISSED_BEACON_COUNT 27
-#define RAY_MIB_ADHOC_MISSED_BEACON_COUNT 28
-#define RAY_MIB_COUNTRY_CODE 29
-#define RAY_MIB_HOP_SEQ 30
-#define RAY_MIB_HOP_SEQ_LEN 31
-#define RAY_MIB_CW_MAX 32
-#define RAY_MIB_CW_MIN 33
-#define RAY_MIB_NOISE_FILTER_GAIN 34
-#define RAY_MIB_NOISE_LIMIT_OFFSET 35
-#define RAY_MIB_RSSI_THRESH_OFFSET 36
-#define RAY_MIB_BUSY_THRESH_OFFSET 37
-#define RAY_MIB_SYNC_THRESH 38
-#define RAY_MIB_TEST_MODE 39
-#define RAY_MIB_TEST_MIN_CHAN 40
-#define RAY_MIB_TEST_MAX_CHAN 41
-#define RAY_MIB_ALLOW_PROBE_RESP 42
-#define RAY_MIB_PRIVACY_MUST_START 43
-#define RAY_MIB_PRIVACY_CAN_JOIN 44
-#define RAY_MIB_BASIC_RATE_SET 45
-#define RAY_MIB_VERSION 46
-#define RAY_MIB_CUR_BSSID 47
-#define RAY_MIB_CUR_INITED 48
-#define RAY_MIB_CUR_DEF_TXRATE 49
-#define RAY_MIB_CUR_ENCRYPT 50
-#define RAY_MIB_CUR_NET_TYPE 51
-#define RAY_MIB_CUR_SSID 52
-#define RAY_MIB_CUR_PRIV_START 53
-#define RAY_MIB_CUR_PRIV_JOIN 54
-#define RAY_MIB_DES_BSSID 55
-#define RAY_MIB_DES_INITED 56
-#define RAY_MIB_DES_DEF_TXRATE 57
-#define RAY_MIB_DES_ENCRYPT 58
-#define RAY_MIB_DES_NET_TYPE 59
-#define RAY_MIB_DES_SSID 60
-#define RAY_MIB_DES_PRIV_START 61
-#define RAY_MIB_DES_PRIV_JOIN 62
-#define RAY_MIB_CUR_AP_STATUS 63
-#define RAY_MIB_CUR_PROMISC 64
-#define RAY_MIB_DES_AP_STATUS 65
-#define RAY_MIB_DES_PROMISC 66
-
-#define RAY_MIB_LASTUSER 45
-#define RAY_MIB_MAX 66
-
-/*
- * Strings for the MIB
- */
-#define RAY_MIB_STRINGS { \
- "Network type", \
- "AP status", \
- "SSID", \
- "Scan mode", \
- "APM mode", \
- "MAC address", \
- "Fragmentation threshold", \
- "Dwell time", \
- "Beacon period", \
- "DTIM_INTERVAL", \
- "MAX_RETRY", \
- "ACK_TIMO", \
- "SIFS", \
- "DIFS", \
- "PIFS", \
- "RTS_THRESH", \
- "SCAN_DWELL", \
- "SCAN_MAX_DWELL", \
- "ASSOC_TIMO", \
- "ADHOC_SCAN_CYCLE", \
- "INFRA_SCAN_CYCLE", \
- "INFRA_SUPER_SCAN_CYCLE", \
- "PROMISC", \
- "UNIQ_WORD", \
- "SLOT_TIME", \
- "ROAM_LOW_SNR_THRESH", \
- "LOW_SNR_COUNT", \
- "INFRA_MISSED_BEACON_COUNT", \
- "ADHOC_MISSED_BEACON_COUNT", \
- "COUNTRY_CODE", \
- "HOP_SEQ", \
- "HOP_SEQ_LEN", \
- "CW_MAX", \
- "CW_MIN", \
- "NOISE_FILTER_GAIN", \
- "NOISE_LIMIT_OFFSET", \
- "RSSI_THRESH_OFFSET", \
- "BUSY_THRESH_OFFSET", \
- "SYNC_THRESH", \
- "TEST_MODE", \
- "TEST_MIN_CHAN", \
- "TEST_MAX_CHAN", \
- "ALLOW_PROBE_RESP", \
- "PRIVACY_MUST_START", \
- "PRIVACY_CAN_JOIN", \
- "BASIC_RATE_SET", \
- "Firmware version", \
- "Current BSS Id", \
- "Current INITED", \
- "Current DEF_TXRATE", \
- "Current ENCRYPT", \
- "Current NET_TYPE", \
- "Current SSID", \
- "Current PRIV_START", \
- "Current PRIV_JOIN", \
- "Desired BSSID", \
- "Desired INITED", \
- "Desired DEF_TXRATE", \
- "Desired ENCRYPT", \
- "Desired NET_TYPE", \
- "Desired SSID", \
- "Desired PRIV_START", \
- "Desired PRIV_JOIN", \
- "Current AP_STATUS", \
- "Current PROMISC", \
- "Desired AP_STATUS", \
- "Desired PROMISC" \
-}
-
-#define RAY_MIB_HELP_STRINGS { \
- "0 Ad hoc, 1 Infrastructure", \
- "0 Station, 1 Access Point", \
- "", \
- "0 Passive, 1 Active", \
- "0 Off, 1 On", \
- "", \
- "Bytes", \
- "DWELL_TIME", \
- "BEACON_PERIOD", \
- "DTIM_INTERVAL", \
- "MAX_RETRY", \
- "ACK_TIMO", \
- "SIFS", \
- "DIFS", \
- "PIFS", \
- "RTS_THRESH", \
- "SCAN_DWELL", \
- "SCAN_MAX_DWELL", \
- "ASSOC_TIMO", \
- "ADHOC_SCAN_CYCLE", \
- "INFRA_SCAN_CYCLE", \
- "INFRA_SUPER_SCAN_CYCLE", \
- "PROMISC", \
- "UNIQ_WORD", \
- "SLOT_TIME", \
- "ROAM_LOW_SNR_THRESH", \
- "LOW_SNR_COUNT", \
- "INFRA_MISSED_BEACON_COUNT", \
- "ADHOC_MISSED_BEACON_COUNT", \
- "COUNTRY_CODE", \
- "HOP_SEQ", \
- "HOP_SEQ_LEN", \
- "CW_MAX", \
- "CW_MIN", \
- "NOISE_FILTER_GAIN", \
- "NOISE_LIMIT_OFFSET", \
- "RSSI_THRESH_OFFSET", \
- "BUSY_THRESH_OFFSET", \
- "SYNC_THRESH", \
- "TEST_MODE", \
- "TEST_MIN_CHAN", \
- "TEST_MAX_CHAN", \
- "ALLOW_PROBE_RESP", \
- "PRIVACY_MUST_START", \
- "PRIVACY_CAN_JOIN", \
- "BASIC_RATE_SET", \
- "", \
- "", \
- "0 Joined a net, 1 Created a net", \
- "Current DEF_TXRATE", \
- "Current ENCRYPT", \
- "Current NET_TYPE", \
- "", \
- "Current PRIV_START", \
- "Current PRIV_JOIN", \
- "", \
- "N/A", \
- "Desired DEF_TXRATE", \
- "Desired ENCRYPT", \
- "Desired NET_TYPE", \
- "", \
- "Desired PRIV_START", \
- "Desired PRIV_JOIN", \
- "Current AP_STATUS", \
- "Current PROMISC", \
- "Desired AP_STATUS", \
- "Desired PROMISC" \
-}
-
-/*
- * Applicable versions and work size for each MIB element
- */
-#define RAY_MIB_INFO_SIZ4 1
-#define RAY_MIB_INFO_SIZ5 2
-#define RAY_MIB_SIZE(info, mib, version) \
- info[(mib)][(version & RAY_V4)?RAY_MIB_INFO_SIZ4:RAY_MIB_INFO_SIZ5]
-#define RAY_MIB_INFO { \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_NET_TYPE */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_AP_STATUS */ \
-{RAY_V4|RAY_V5, IEEE80211_NWID_LEN, \
- IEEE80211_NWID_LEN},/* RAY_MIB_SSID */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_SCAN_MODE */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_APM_MODE */ \
-{RAY_V4|RAY_V5, ETHER_ADDR_LEN, \
- ETHER_ADDR_LEN},/* RAY_MIB_MAC_ADDR */ \
-{RAY_V4|RAY_V5, 2, 2}, /* RAY_MIB_FRAG_THRESH */ \
-{RAY_V4|RAY_V5, 2, 2}, /* RAY_MIB_DWELL_TIME */ \
-{RAY_V4|RAY_V5, 2, 2}, /* RAY_MIB_BEACON_PERIOD */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_DTIM_INTERVAL */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_MAX_RETRY */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_ACK_TIMO */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_SIFS */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_DIFS */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_PIFS */ \
-{RAY_V4|RAY_V5, 2, 2}, /* RAY_MIB_RTS_THRESH */ \
-{RAY_V4|RAY_V5, 2, 2}, /* RAY_MIB_SCAN_DWELL */ \
-{RAY_V4|RAY_V5, 2, 2}, /* RAY_MIB_SCAN_MAX_DWELL */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_ASSOC_TIMO */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_ADHOC_SCAN_CYCLE */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_INFRA_SCAN_CYCLE */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_INFRA_SUPER_SCAN_CYCLE */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_PROMISC */ \
-{RAY_V4|RAY_V5, 2, 2}, /* RAY_MIB_UNIQ_WORD */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_SLOT_TIME */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_ROAM_LOW_SNR_THRESH */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_LOW_SNR_COUNT */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_INFRA_MISSED_BEACON_COUNT */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_ADHOC_MISSED_BEACON_COUNT */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_COUNTRY_CODE */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_HOP_SEQ */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_HOP_SEQ_LEN */ \
-{RAY_V4|RAY_V5, 1, 2}, /* RAY_MIB_CW_MAX */ \
-{RAY_V4|RAY_V5, 1, 2}, /* RAY_MIB_CW_MIN */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_NOISE_FILTER_GAIN */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_NOISE_LIMIT_OFFSET */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_RSSI_THRESH_OFFSET */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_BUSY_THRESH_OFFSET */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_SYNC_THRESH */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_TEST_MODE */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_TEST_MIN_CHAN */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_TEST_MAX_CHAN */ \
-{ RAY_V5, 0, 1}, /* RAY_MIB_ALLOW_PROBE_RESP */ \
-{ RAY_V5, 0, 1}, /* RAY_MIB_PRIVACY_MUST_START */ \
-{ RAY_V5, 0, 1}, /* RAY_MIB_PRIVACY_CAN_JOIN */ \
-{ RAY_V5, 0, 8}, /* RAY_MIB_BASIC_RATE_SET */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_VERSION */ \
-{RAY_V4|RAY_V5, ETHER_ADDR_LEN, \
- ETHER_ADDR_LEN},/* RAY_MIB_CUR_BSSID */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_CUR_INITED */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_CUR_DEF_TXRATE */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_CUR_ENCRYPT */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_CUR_NET_TYPE */ \
-{RAY_V4|RAY_V5, IEEE80211_NWID_LEN, \
- IEEE80211_NWID_LEN}, /* RAY_MIB_CUR_SSID */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_CUR_PRIV_START */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_CUR_PRIV_JOIN */ \
-{RAY_V4|RAY_V5, ETHER_ADDR_LEN, \
- ETHER_ADDR_LEN},/* RAY_MIB_DES_BSSID */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_DES_INITED */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_DES_DEF_TXRATE */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_DES_ENCRYPT */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_DES_NET_TYPE */ \
-{RAY_V4|RAY_V5, IEEE80211_NWID_LEN, \
- IEEE80211_NWID_LEN}, /* RAY_MIB_DES_SSID */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_DES_PRIV_START */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_DES_PRIV_JOIN */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_CUR_AP_STATUS */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_CUR_PROMISC */ \
-{RAY_V4|RAY_V5, 1, 1}, /* RAY_MIB_DES_AP_STATUS */ \
-{RAY_V4|RAY_V5, 1, 1} /* RAY_MIB_DES_PROMISC */ \
-}
-
-/*
- * MIB values
- *
- * I've included comments as to where the numbers have originated
- * from.
- *
- * Linux refers to ray_cs.c and rayctl.h from version 167 of the
- * Linux Raylink driver.
- *
- * NetBSD refers to if_ray.c from version 1.12 of the NetBSD Raylink
- * driver.
- *
- * Symb refers to numbers cleaned from the 802.11 specification,
- * discussion with 802.11 knowledgable people at Symbionics or
- * stuff needed by me (i.e. me, * aps, ifo, hjl).
- *
- * V4 and V5 refer to settings for version 4 and version 5 of
- * the firmware.
- *
- * DOC refers to the
- * Combined Interface Requirements Specification
- * and Interface Design Document (IRS/IDD)
- * for the
- * WLAN System Interfaces Between the
- * HOST COMPUTER and the
- * PCMCIA WLAN INTERFACE CARD
- * Revision ECF 5.00
- * 17 June, 1998
- */
-
-/* XXX Obtained by raycontrol _before_ downloading
- * # /sys/dev/ray/raycontrol/raycontrol -i ray0
- * Firmware version 4
- * Network type 0x01 0 Ad hoc, 1 Infrastructure
- * AP status 0x00 0 Station, 1 Access Point
- * SSID
- * Scan mode 0x01 0 Passive, 1 Active
- * APM mode 0x00 0 Off, 1 On
- * MAC address 00:00:8f:48:e4:44
- * Fragmentation threshold 0x0200 FRAG_THRESH
- * Dwell tIME 0x01 DWELL_TIME
- * Beacon period 0x01 BEACON_PERIOD
- * DTIM_INTERVAL 0x05 DTIM_INTERVAL
- * MAX_RETRY 0x03 MAX_RETRY
- * ACK_TIMO 0x8c ACK_TIMO
- * SIFS 0x1e SIFS
- * DIFS 0x82 DIFS
- * PIFS 0xce PIFS
- * RTS_THRESH 0x0100 RTS_THRESH
- * SCAN_DWELL 0xfc18 SCAN_DWELL
- * SCAN_MAX_DWELL 0xc180 SCAN_MAX_DWELL
- * ASSOC_TIMO 0x05 ASSOC_TIMO
- * ADHOC_SCAN_CYCLE 0x04 ADHOC_SCAN_CYCLE
- * INFRA_SCAN_CYCLE 0x02 INFRA_SCAN_CYCLE
- * INFRA_SUPER_SCAN_CYCLE 0x04 INFRA_SUPER_SCAN_CYCLE
- * PROMISC 0x00 PROMISC
- * UNIQ_WORD 0x0cbd UNIQ_WORD
- * SLOT_TIME 0x4e SLOT_TIME
- * ROAM_LOW_SNR_THRESH 0x20 ROAM_LOW_SNR_THRESH
- * LOW_SNR_COUNT 0x04 LOW_SNR_COUNT
- * INFRA_MISSED_BEACON_COUNT 0x04 INFRA_MISSED_BEACON_COUNT
- * ADHOC_MISSED_BEACON_COUNT 0x04 ADHOC_MISSED_BEACON_COUNT
- * COUNTRY_CODE 0x01 COUNTRY_CODE
- * HOP_SEQ 0x07 HOP_SEQ
- * HOP_SEQ_LEN 0x4e HOP_SEQ_LEN
- * CW_MAX 0x3f CW_MAX
- * CW_MIN 0x0f CW_MIN
- * NOISE_FILTER_GAIN 0x00 NOISE_FILTER_GAIN
- * NOISE_LIMIT_OFFSET 0x00 NOISE_LIMIT_OFFSET
- * RSSI_THRESH_OFFSET 0x70 RSSI_THRESH_OFFSET
- * BUSY_THRESH_OFFSET 0x70 BUSY_THRESH_OFFSET
- * SYNC_THRESH 0x07 SYNC_THRESH
- * TEST_MODE 0x00 TEST_MODE
- * TEST_MIN_CHAN 0x02 TEST_MIN_CHAN
- * TEST_MAX_CHAN 0x02 TEST_MAX_CHAN
-*/
-
-/*
- * mib_net_type
- *
- * DOC 0x01 - Defines network type for Start and Join
- * - Network commands.
- *
- * Symb 0x00 - Adhoc is safer and I ain't got an AP
- */
-#define RAY_MIB_NET_TYPE_ADHOC 0x00
-#define RAY_MIB_NET_TYPE_INFRA 0x01
-#define RAY_MIB_NET_TYPE_DEFAULT RAY_MIB_NET_TYPE_ADHOC
-
-/*
- * mib_ap_status
- *
- * DOC 0x00 - Applicable only when Network Type is
- * - Infrastructure.
- */
-#define RAY_MIB_AP_STATUS_TERMINAL 0x00
-#define RAY_MIB_AP_STATUS_AP 0x01
-#define RAY_MIB_AP_STATUS_DEFAULT RAY_MIB_AP_STATUS_TERMINAL
-
-/*
- * mib_ssid
- *
- * DOC ESSID1 - Service Set ID. Can be any ASCII string
- * - up to 32 bytes in length. If the string is
- * - less than 32 bytes long, it must be
- * - followed by a byte of 00h.
- *
- * Symb - windows setting comes from the Aviator software v1.1
- */
-#define RAY_MIB_SSID_WINDOWS "NETWORK_NAME"
-#define RAY_MIB_SSID_NOT_WINDOWS "WIRELESS_NETWORK"
-#define RAY_MIB_SSID_DEFAULT RAY_MIB_SSID_WINDOWS
-
-/*
- * mib_scan_mode
- *
- * DOC 0x01 - Defines acquisition approach for
- * - terminals operating in either Ad Hoc or
- * - Infrastructure Networks. N/A for APs.
- */
-#define RAY_MIB_SCAN_MODE_PASSIVE 0x00
-#define RAY_MIB_SCAN_MODE_ACTIVE 0x01
-#define RAY_MIB_SCAN_MODE_DEFAULT RAY_MIB_SCAN_MODE_ACTIVE
-
-/*
- * mib_apm_mode
- *
- * DOC 0x00 - Defines power management mode for
- * - stations operating in either Ad Hoc or
- * - Infrastructure Networks. Must always
- * - be 0 for APs.
- */
-#define RAY_MIB_APM_MODE_NONE 0x00
-#define RAY_MIB_APM_MODE_POWERSAVE 0x01
-#define RAY_MIB_APM_MODE_DEFAULT RAY_MIB_APM_MODE_NONE
-
-/*
- * mib_mac_addr
- *
- * DOC - MAC Address to be used by WIC (For
- * - format see Figure 3.2.4.1.2-1, MAC
- * - Address Format). Host may echo card
- * - supplied address or use locally
- * - administered address.
- */
-
-/*
- * mib_frag_thresh
- *
- * DOC 0x7fff - Maximum over-the-air packet size (in
- * - bytes)
- *
- * Symb 0xXXXX - you really should fragment when in low signal
- * - conditions but getting it wrong
- * crucifies the performance
- */
-#define RAY_MIB_FRAG_THRESH_MINIMUM 0
-#define RAY_MIB_FRAG_THRESH_MAXIMUM 2346
-#define RAY_MIB_FRAG_THRESH_DISABLE 0x7fff
-#define RAY_MIB_FRAG_THRESH_DEFAULT RAY_MIB_FRAG_THRESH_DISABLE
-
-/*
- * mib_dwell_time
- *
- * DOC 0x0080 - Defines hop dwell time in Kusec.
- * - Required only of stations which intend
- * - to issue a Start Network command.
- * - Forward Compatible Firmware (Build
- * - 5) requires that the dwell time be one of
- * - the set 16, 32, 64, 128, and 256.
- *
- * Linux.h - 16k * 2**n, n=0-4 in Kus
- * Linux.c-V4 0x0200
- * Linux.c-V5 0x0080 - 128 Kus
- * NetBSD-V4 0x0200 - from Linux
- * NetBSD-V4 0x0400 - "divined"
- * NetBSD-V5 0x0080
- * Symb-V4 0xXXXX - 802.11 dwell time is XXX Kus
- * Symb-V5 0xXXXX - 802.11 dwell time is XXX Kus
- *
- * XXX confirm that 1024Kus is okay for windows driver - how? and see
- * XXX how it is over the maximum
- */
-#define RAY_MIB_DWELL_TIME_MINIMUM 1
-#define RAY_MIB_DWELL_TIME_MAXIMUM 390
-#define RAY_MIB_DWELL_TIME_V4 0x0400
-#define RAY_MIB_DWELL_TIME_V5 0x0080
-
-/*
- * mib_beacon_period
- *
- * DOC 0x0100 - Defines time between target beacon
- * - transmit times (TBTT) in Kusec.
- * - Forward Compatible Firmware (Build
- * - 5) requires that the Beacon Period be an
- * - integral multiple of the Dwell Time (not
- * - exceeding 255 hops).
- * - Required only of stations which intend
- * - to issue a Start Network command.
- *
- * Linux.h - n * a_hop_time in Kus
- * Linux.c-V4 0x0001
- * Linux.c-V5 0x0100 - 256 Kus
- * NetBSD-V4 0x0001 - from Linux
- * NetBSD-V4 0x0000 - "divined"
- * NetBSD-V5 0x0100
- * Symb-V4 0x0001 - best performance is one beacon each dwell XXX
- * Symb-V5 0x0080 - best performance is one beacon each dwell XXX
- *
- * XXX V4 should probably set this to dwell_time
- */
-#define RAY_MIB_BEACON_PERIOD_MINIMUM 1
-#define RAY_MIB_BEACON_PERIOD_MAXIMUM 0xffff
-#define RAY_MIB_BEACON_PERIOD_V4 0x0001
-#define RAY_MIB_BEACON_PERIOD_V5 RAY_MIB_DWELL_TIME_V5
-
-/*
- * mib_dtim_interval
- *
- * DOC 0x01 - Number of beacons per DTIM period.
- * - Only APs will use this parameter, to set
- * - the DTIM period.
- *
- * Linux.h - in beacons
- * Linux.c 0x01
- * NetBSD 0x01
- * Symb 0xXX - need to find out what DTIM is
- */
-#define RAY_MIB_DTIM_INTERVAL_MINIMUM 1
-#define RAY_MIB_DTIM_INTERVAL_MAXIMUM 255
-#define RAY_MIB_DTIM_INTERVAL_DEFAULT 0x01
-
-/*
- * mib_max_retry
- *
- * DOC 31 - Number of times WIC will attempt to
- * - retransmit a failed packet.
- *
- * Linux.c 0x07
- * NetBSD 0x01 - "documented default for 5/6"
- * NetBSD 0x07 - from Linux
- * NetBSD 0x03 - "divined"
- * Symb 0xXX - 7 retries seems okay but check with APS
- */
-#define RAY_MIB_MAX_RETRY_MINIMUM 0
-#define RAY_MIB_MAX_RETRY_MAXIMUM 255
-#define RAY_MIB_MAX_RETRY_DEFAULT 0x07
-
-/*
- * mib_ack_timo
- *
- * DOC 0x86 - Time WIC will wait after completion of
- * - a transmit before timing out anticipated
- * - ACK (2 usec steps). Should equal
- * - SIFS + constant.
- *
- * Linux.c 0xa3
- * NetBSD 0x86 - documented default for 5/6
- * NetBSD 0xa3 - from Linux
- * NetBSD 0xa3 - "divined"
- * Symb 0xXX - this must be a 802.11 defined setting?
- */
-#define RAY_MIB_ACK_TIMO_MINIMUM 0
-#define RAY_MIB_ACK_TIMO_MAXIMUM 255
-#define RAY_MIB_ACK_TIMO_DEFAULT 0xa3
-
-/*
- * mib_sifs
- *
- * DOC 0x1c - SIFS time in usec.
- *
- * Linux.c 0x1d
- * NetBSD 0x1c - documented default for 5/6
- * NetBSD 0x1d - from Linux
- * NetBSD 0x1d - "divined"
- * Symb 0xXX - default SIFS for 802.11
- */
-#define RAY_MIB_SIFS_MINIMUM 28
-#define RAY_MIB_SIFS_MAXIMUM 62
-#define RAY_MIB_SIFS_DEFAULT 0x1d
-
-/*
- * mib_difs
- *
- * DOC 0x82 - DIFS time in usec.
- */
-#define RAY_MIB_DIFS_MINIMUM 130
-#define RAY_MIB_DIFS_MAXIMUM 255
-#define RAY_MIB_DIFS_DEFAULT 0x82
-
-/*
- * mib_pifs
- *
- * DOC 78 - PIFS time in usec. (Not currently
- * - implemented.
- */
-#define RAY_MIB_PIFS_MINIMUM 78
-#define RAY_MIB_PIFS_MAXIMUM 255
-#define RAY_MIB_PIFS_V4 0xce
-#define RAY_MIB_PIFS_V5 0x4e
-
-/*
- * mib_rts_thresh
- *
- * DOC 0x7ffff - Threshold size in bytes below which
- * - messages will not require use of RTS
- * - Protocol.
- *
- * Linux.c 0x7fff
- * NetBSD 0x7fff - disabled
- * Symb 0xXXXX - need to set this realistically to get CTS/RTS mode
- * working right
- */
-#define RAY_MIB_RTS_THRESH_MINIMUM 0
-#define RAY_MIB_RTS_THRESH_MAXIMUM 2346
-#define RAY_MIB_RTS_THRESH_DISABLE 0x7fff
-#define RAY_MIB_RTS_THRESH_DEFAULT RAY_MIB_RTS_THRESH_DISABLE
-
-/*
- * mib_scan_dwell
- *
- * DOC 0x04e2 - Time channel remains clear after probe
- * - transmission prior to hopping to next
- * - channel. (in 2 msec steps).
- *
- * Linux.c-V4 0xfb1e - 128572us
- * Linix.c-V5 0x04e2 - 2500us
- * NetBSD-V4 0xfb1e
- * NetBSD-V5 0x04e2
- * Symb 0xXXXX - Check that v4 h/w can do 2.5ms and default it
- */
-#define RAY_MIB_SCAN_DWELL_MINIMUM 1
-#define RAY_MIB_SCAN_DWELL_MAXIMUM 65535
-#define RAY_MIB_SCAN_DWELL_V4 0xfb1e
-#define RAY_MIB_SCAN_DWELL_V5 0x04e2
-
-/*
- * mib_scan_max_dwell
- *
- * DOC 0x38a4 - Time to remain on a frequency channel
- * - if CCA is detected after probe
- * - transmission. (in 2 usec steps).
- *
- * Linux.c-V4 0xc75c - 102072us
- * Linix.c-V5 0x38a4 - 29000us
- * NetBSD-V4 0xc75c
- * NetBSD-V5 0x38a4
- * Symb 0xXXXX - see above - this may be total time before giving up
- */
-#define RAY_MIB_SCAN_MAX_DWELL_MINIMUM 1
-#define RAY_MIB_SCAN_MAX_DWELL_MAXIMUM 65535
-#define RAY_MIB_SCAN_MAX_DWELL_V4 0xc75c
-#define RAY_MIB_SCAN_MAX_DWELL_V5 0x38a4
-
-/*
- * mib_assoc_timo
- *
- * DOC 0x05 - Time (in hops) a station waits after
- * - transmitting an Association Request
- * - Message before association attempt is
- * - considered failed. N/A for Ad Hoc
- * - Networks and for APs in Infrastructure
- */
-#define RAY_MIB_ASSOC_TIMO_MINIMUM 0
-#define RAY_MIB_ASSOC_TIMO_MAXIMUM 255
-#define RAY_MIB_ASSOC_TIMO_DEFAULT 0x05
-
-/*
- * mib_adhoc_scan_cycle
- *
- * DOC 0x08 - Maximum number of times to cycle
- * - through frequency hopping pattern as
- * - part of scanning during Ad Hoc
- * - Acquisition.
- */
-#define RAY_MIB_ADHOC_SCAN_CYCLE_MINIMUM 1
-#define RAY_MIB_ADHOC_SCAN_CYCLE_MAXIMUM 255
-#define RAY_MIB_ADHOC_SCAN_CYCLE_DEFAULT 0x08
-
-/*
- * mib_infra_scan_cycle
- *
- * DOC 0x02 - Number of times to cycle through
- * - frequency hopping pattern as part of
- * - scanning during Infrastructure Network
- * - Acquisition.
- */
-#define RAY_MIB_INFRA_SCAN_CYCLE_MINIMUM 1
-#define RAY_MIB_INFRA_SCAN_CYCLE_MAXIMUM 255
-#define RAY_MIB_INFRA_SCAN_CYCLE_DEFAULT 0x02
-
-/*
- * mib_infra_super_scan_cycle
- *
- * DOC 0x08 - Number of times to repeat an
- * - Infrastructure scan cycle if no APs are
- * - found before indicating a failure.
- */
-#define RAY_MIB_INFRA_SUPER_SCAN_CYCLE_MINIMUM 1
-#define RAY_MIB_INFRA_SUPER_SCAN_CYCLE_MAXIMUM 255
-#define RAY_MIB_INFRA_SUPER_SCAN_CYCLE_DEFAULT 0x08
-
-/*
- * mib_promisc
- *
- * DOC 0x00 - Controls operation of WIC in
- * - promiscuous mode.
- */
-#define RAY_MIB_PROMISC_DISABLED 0
-#define RAY_MIB_PROMISC_ENABLED 1
-#define RAY_MIB_PROMISC_DEFAULT 0x00
-
-/*
- * mib_uniq_word
- *
- * DOC 0x0cdb - Unique word pattern (Transmitted as
- * - 0CBDh per 802.11)
- */
-#define RAY_MIB_UNIQ_WORD_MINIMUM 0
-#define RAY_MIB_UNIQ_WORD_MAXIMUM 0xffff
-#define RAY_MIB_UNIQ_WORD_DEFAULT 0x0cbd
-
-/*
- * mib_slot_time
- *
- * DOC 0x32 - Slot time in usec
- *
- * Linux.c-V4 0x4e
- * Linix.c-V5 0x32
- * NetBSD-V4 0x4e - Linux
- * NetBSD-V4 0x18 - "divined"
- * NetBSD-V5 0x32 - mentions spec. is 50us i.e. 0x32
- * Symb 0xXX - wtf 0x4e = 78
- */
-#define RAY_MIB_SLOT_TIME_MINIMUM 1
-#define RAY_MIB_SLOT_TIME_MAXIMUM 128
-#define RAY_MIB_SLOT_TIME_V4 0x4e
-#define RAY_MIB_SLOT_TIME_V5 0x32
-
-/*
- * mib_roam_low_snr_thresh
- *
- * DOC 0xff - SNR Threshold for use by roaming
- * - algorithm. [Low power count is
- * - incremented when Beacon is received at
- * - SNR lower than Roaming Low SNR
- * - Threshold.] To disable, set to FFh.
- *
- * Linux.c 0xff
- * NetBSD-V4 0xff - Linux
- * NetBSD-V4 0x30 - "divined"
- * NetBSD-V5 0xff - disabled
- * NetBSD.h - if below this inc count
- * Symb 0xXX - hmm is 0xff really disabled? need this to work
- */
-#define RAY_MIB_ROAM_LOW_SNR_THRESH_MINIMUM 0
-#define RAY_MIB_ROAM_LOW_SNR_THRESH_MAXIMUM 255
-#define RAY_MIB_ROAM_LOW_SNR_THRESH_DISABLED 0xff
-#define RAY_MIB_ROAM_LOW_SNR_THRESH_DEFAULT RAY_MIB_ROAM_LOW_SNR_THRESH_DISABLED
-
-/*
- * mib_low_snr_count
- *
- * DOC 0xff - Threshold that number of consecutive
- * - beacons received at SNR < Roaming
- * - Low SNR Threshold must exceed
- * - before roaming processing begins. To
- * - disable, set to FFh.
- *
- * Linux.c 0xff
- * NetBSD 0x07 - "divined - check" and marked as disabled
- * NetBSD 0xff - disabled
- * NetBSD.h - roam after cnt below thrsh
- * Symb 0xXX - hmm is 0xff really disabled? need
- * - this to work in infrastructure mode with mutliple APs
- */
-#define RAY_MIB_LOW_SNR_COUNT_MINIMUM 0
-#define RAY_MIB_LOW_SNR_COUNT_MAXIMUM 255
-#define RAY_MIB_LOW_SNR_COUNT_DISABLED 0xff
-#define RAY_MIB_LOW_SNR_COUNT_DEFAULT RAY_MIB_LOW_SNR_COUNT_DISABLED
-
-/*
- * mib_infra_missed_beacon_count
- *
- * DOC 0x02 - Threshold that number of consecutive
- * - beacons not received must exceed
- * - before roaming processing begins in an
- * - infrastructure network. To disable, set
- * - to FFh.
- * Linux.c 0x05
- * NetBSD 0x02 - documented default for 5/6
- * NetBSD 0x05 - Linux
- * NetBSD 0x07 - "divined - check, looks fishy"
- * Symb 0xXX - 5 missed beacons is probably okay
- */
-#define RAY_MIB_INFRA_MISSED_BEACON_COUNT_MINIMUM 0
-#define RAY_MIB_INFRA_MISSED_BEACON_COUNT_MAXIMUM 255
-#define RAY_MIB_INFRA_MISSED_BEACON_COUNT_DEFAULT 0x05
-
-/*
- * mib_adhoc_missed_beacon_count
- *
- * DOC 0xff - Threshold that number of consecutive
- * - beacons transmitted by a terminal must
- * - exceed before reacquisition processing
- * - begins in Ad Hoc Network.
- */
-#define RAY_MIB_ADHOC_MISSED_BEACON_COUNT_MINIMUM 0
-#define RAY_MIB_ADHOC_MISSED_BEACON_COUNT_MAXIMUM 255
-#define RAY_MIB_ADHOC_MISSED_BEACON_COUNT_DISABLED 0xff
-#define RAY_MIB_ADHOC_MISSED_BEACON_COUNT_DEFAULT RAY_MIB_ADHOC_MISSED_BEACON_COUNT_DISABLED
-
-/*
- * mib_country_code
- *
- * DOC 0x01 - Country set of hopping patterns
- * - (element value in beacon)
- * - Note: Japan Test is for a special test
- * - mode required by the Japanese
- * - regulatory authorities.
- */
-#define RAY_MIB_COUNTRY_CODE_MIMIMUM 0x01
-#define RAY_MIB_COUNTRY_CODE_MAXIMUM 0x09
-#define RAY_MIB_COUNTRY_CODE_USA 0x01
-#define RAY_MIB_COUNTRY_CODE_EUROPE 0x02
-#define RAY_MIB_COUNTRY_CODE_JAPAN 0x03
-#define RAY_MIB_COUNTRY_CODE_KOREA 0x04
-#define RAY_MIB_COUNTRY_CODE_SPAIN 0x05
-#define RAY_MIB_COUNTRY_CODE_FRANCE 0x06
-#define RAY_MIB_COUNTRY_CODE_ISRAEL 0x07
-#define RAY_MIB_COUNTRY_CODE_AUSTRALIA 0x08
-#define RAY_MIB_COUNTRY_CODE_JAPAN_TEST 0x09
-#define RAY_MIB_COUNTRY_CODE_DEFAULT RAY_MIB_COUNTRY_CODE_USA
-
-/*
- * mib_hop_seq
- *
- * DOC 0x0b - Hop Pattern to use. (Currently 66
- * - US/Europe plus 12 Japanese).
- *
- * NetBSD.h - no longer supported
- */
-#define RAY_MIB_HOP_SEQ_MINIMUM 6
-#define RAY_MIB_HOP_SEQ_MAXIMUM 72
-#define RAY_MIB_HOP_SEQ_DEFAULT 0x0b
-
-/*
- * mib_hop_seq_len
- *
- * DOC 0x4f - Number of frequency channels in
- * - hopping pattern is now set to the value
- * - defined in IEEE802.11 for the selected
- * - Current Country Code.
- */
-#define RAY_MIB_HOP_SEQ_LEN_MINIMUM 1
-#define RAY_MIB_HOP_SEQ_LEN_MAXIMUM 79
-#define RAY_MIB_HOP_SEQ_LEN_V4 0x4e
-#define RAY_MIB_HOP_SEQ_LEN_V5 0x4f
-
-/* XXX need to update these to the spec. XXX */
-
-/*
- * All from here down are the same in Linux/NetBSD and seem to be sane.
- */
-#define RAY_MIB_CW_MAX_V4 0x3f
-#define RAY_MIB_CW_MAX_V5 0x003f
-
-#define RAY_MIB_CW_MIN_V4 0x0f
-#define RAY_MIB_CW_MIN_V5 0x000f
-
-/*
- * Symb 0xXX - these parameters will affect the clear channel
- * assesment false triggering
- *
- */
-#define RAY_MIB_NOISE_FILTER_GAIN_DEFAULT 0x04
-#define RAY_MIB_NOISE_LIMIT_OFFSET_DEFAULT 0x08
-#define RAY_MIB_RSSI_THRESH_OFFSET_DEFAULT 0x28
-#define RAY_MIB_BUSY_THRESH_OFFSET_DEFAULT 0x28
-#define RAY_MIB_SYNC_THRESH_DEFAULT 0x07
-
-#define RAY_MIB_TEST_MODE_NORMAL 0x0
-#define RAY_MIB_TEST_MODE_ANT_1 0x1
-#define RAY_MIB_TEST_MODE_ATN_2 0x2
-#define RAY_MIB_TEST_MODE_ATN_BOTH 0x3
-#define RAY_MIB_TEST_MODE_DEFAULT RAY_MIB_TEST_MODE_NORMAL
-
-#define RAY_MIB_TEST_MIN_CHAN_DEFAULT 0x02
-#define RAY_MIB_TEST_MAX_CHAN_DEFAULT 0x02
-
-#define RAY_MIB_ALLOW_PROBE_RESP_DISALLOW 0x0
-#define RAY_MIB_ALLOW_PROBE_RESP_ALLOW 0x1
-#define RAY_MIB_ALLOW_PROBE_RESP_DEFAULT RAY_MIB_ALLOW_PROBE_RESP_DISALLOW
-
-#define RAY_MIB_PRIVACY_MUST_START_NOWEP 0x0
-#define RAY_MIB_PRIVACY_MUST_START_WEP 0x1
-#define RAY_MIB_PRIVACY_MUST_START_DEFAULT RAY_MIB_PRIVACY_MUST_START_NOWEP
-
-#define RAY_MIB_PRIVACY_CAN_JOIN_NOWEP 0x0
-#define RAY_MIB_PRIVACY_CAN_JOIN_WEP 0x1
-#define RAY_MIB_PRIVACY_CAN_JOIN_DONT_CARE 0x2
-#define RAY_MIB_PRIVACY_CAN_JOIN_DEFAULT RAY_MIB_PRIVACY_CAN_JOIN_NOWEP
-
-#define RAY_MIB_BASIC_RATE_SET_MINIMUM 1
-#define RAY_MIB_BASIC_RATE_SET_MAXIMUM 4
-#define RAY_MIB_BASIC_RATE_SET_500K 1
-#define RAY_MIB_BASIC_RATE_SET_1000K 2
-#define RAY_MIB_BASIC_RATE_SET_1500K 3
-#define RAY_MIB_BASIC_RATE_SET_2000K 4
-#define RAY_MIB_BASIC_RATE_SET_DEFAULT RAY_MIB_BASIC_RATE_SET_2000K
-
-/*
- * IOCTL support
- */
-struct ray_param_req {
- int r_failcause;
- u_int8_t r_paramid;
- u_int8_t r_len;
- u_int8_t r_data[256];
-};
-struct ray_stats_req {
- u_int64_t rxoverflow; /* Number of rx overflows */
- u_int64_t rxcksum; /* Number of checksum errors */
- u_int64_t rxhcksum; /* Number of header checksum errors */
- u_int8_t rxnoise; /* Average receiver level */
-};
-#define RAY_FAILCAUSE_EIDRANGE 1
-#define RAY_FAILCAUSE_ELENGTH 2
-/* device can possibly return up to 255 */
-#define RAY_FAILCAUSE_EDEVSTOP 256
-
-/* Get a param the data is a ray_param_req structure */
-#define SIOCSRAYPARAM SIOCSIFGENERIC
-#define SIOCGRAYPARAM SIOCGIFGENERIC
-/* Get the error counters the data is a ray_stats_req structure */
-#define SIOCGRAYSTATS _IOWR('i', 201, struct ifreq)
-#define SIOCGRAYSIGLEV _IOWR('i', 202, struct ifreq)
-
-#define RAY_NSIGLEVRECS 8
-#define RAY_NSIGLEV 8
-#define RAY_NANTENNA 8
-
-struct ray_siglev {
- u_int8_t rsl_host[ETHER_ADDR_LEN]; /* MAC address */
- u_int8_t rsl_siglevs[RAY_NSIGLEV]; /* levels, newest in [0] */
- u_int8_t rsl_antennas[RAY_NANTENNA]; /* best antenna */
- struct timeval rsl_time; /* time of last packet */
-};
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-02 10:49:59 +0000