1 files changed, 0 insertions, 124 deletions
diff --git a/usr.sbin/stallion/stlload/stlload.8 b/usr.sbin/stallion/stlload/stlload.8
deleted file mode 100644
index 51e1197ee1772..0000000000000
--- a/usr.sbin/stallion/stlload/stlload.8
+++ /dev/null
@@ -1,124 +0,0 @@
-.\" Copyright (c) 1996 Greg Ungerer (gerg@stallion.oz.au).
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by Greg Ungerer.
-.\" 4. Neither the name of the author nor the names of any co-contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"    without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.Dd December 2, 1996
-.Os FreeBSD
-.Dt STLLOAD 8 i386
-.Sh NAME
-.Nm stlload
-.Nd "Stallion Technologies multiport serial board down loader"
-.Sh SYNOPSIS
-.Nm stlload
-.Op Fl vhVR
-.Op Fl i Ar image-file
-.Op Fl c Ar control-device
-.Op Fl r Ar rx-buf-size
-.Op Fl t Ar tx-buf-size
-.Op Fl B Ar boot-banner
-.Op Fl b Ar unit-number
-.Sh DESCRIPTION
-.Nm Stlload
-is used to download the firmware code to Stallion Technologies intelligent
-multiport serial boards.
-A firmware download is only required for those boards that use the Stallion
-.Nm stli
-driver.
-This includes the EasyConnection 8/64, ONboard and Brumby families of boards.
-.Pp
-Different board types require different firmware images.
-If the wrong firmware is loaded into a board it will fail to operate.
-.Pp
-The download process is achieved through the Stallion
-.Nm stli
-driver control device,
-.Pa /dev/staliomem? .
-This device implements a file type device that can read and write into the
-boards shared memory region.
-It also implements a number of special
-.Em ioctls
-that reset and restart the board.
-.Pp
-The options are:
-.Bl -tag -width indent
-.It Fl v
-Verbose output generation.
-Trace is generated at each phase of the download and startup process.
-.It Fl h
-Output usage information.
-.It Fl V
-Output version information.
-.It Fl R
-Reset the board only.
-Does not proceed to download firmware to the board.
-.It Fl i Ar image-file
-Specify the firmware image file to download.
-The default firmware image is
-.Pa /usr/libdata/stallion/cdk.sys .
-.It Fl c Ar control-device
-Specify the board control device through which to download the firmware
-and start up the board.
-The default is
-.Pa /dev/staliomem0 .
-.It Fl r Ar rx-buf-size
-Specify the size of the boards shared memory Receive Data buffer.
-By default the buffer is dynamically sized to use the maximum
-available shared memory.
-.It Fl t Ar tx-buf-size
-Specify the size of the boards shared memory Transmit Data buffer.
-By default the buffer is dynamically sized to use the maximum
-available shared memory.
-.It Fl B Ar boot-banner
-Enable the slave debug trace flag during download.
-This enables debug trace output from the firmware code.
-This trace is output on port 0 of the board,
-and the port is set to 9600 baud, 8 data bits, no parity and 1 stop bit.
-.It Fl b Ar unit-number
-Specify the unit (board) number to be downloaded.  The default is to
-download board 0.
-.El
-.Pp
-.Nm Stlload
-would typically be run from
-.Pa /etc/rc.serial .
-.Sh FILES
-.Bl -tag -width /usr/libdata/stallion/2681.sys
-.It Pa /usr/libdata/stallion/cdk.sys
-firmware code to EasyConnection 8/64 class boards
-.It Pa /usr/libdata/stallion/2681.sys
-firmware code to ONboard and Brumby class boards
-.It Pa /dev/staliomem?
-driver board control device
-.Sh SEE ALSO
-.Xr stl 4 ,
-.Xr stli 4 ,
-.Xr stlstats 8
-.Sh HISTORY
-This program was originally developed by
-.An Greg Ungerer Aq gerg@stallion.com .