From 44fd0d2b3fcf0783ea1c63226a6da3a6b3ae5c69 Mon Sep 17 00:00:00 2001 From: Gabor Kovesdan Date: Wed, 4 May 2011 13:28:53 +0000 Subject: - Trim some unnecessary files --- Makefile | 713 -- Makefile.am | 25 - Makefile.in | 713 -- aclocal.m4 | 7568 ------------------- config.h | 259 - config.h.in | 258 - config.log | 1010 --- config.status | 1276 ---- configure | 17759 -------------------------------------------- configure.ac | 571 -- doc/Makefile | 417 -- lib/Makefile | 16 - lib/stamp-h2 | 1 - lib/tre-config.h | 44 - libtool | 7317 ------------------ m4/Makefile | 359 - m4/Makefile.am | 6 - m4/Makefile.in | 359 - m4/ac_libtool_tags.m4 | 55 - m4/ax_check_funcs_comp.m4 | 32 - m4/ax_check_sign.m4 | 39 - m4/ax_decl_wchar_max.m4 | 38 - m4/gettext.m4 | 381 - m4/iconv.m4 | 180 - m4/intlmacosx.m4 | 51 - m4/lib-ld.m4 | 110 - m4/lib-link.m4 | 709 -- m4/lib-prefix.m4 | 185 - m4/nls.m4 | 31 - m4/po.m4 | 449 -- m4/progtest.m4 | 92 - m4/vl_prog_cc_warnings.m4 | 128 - po/Makefile | 519 -- po/Makefile.in | 429 -- po/POTFILES | 2 - src/Makefile | 511 -- stamp-h1 | 1 - tests/Makefile | 910 --- tests/agrep/Makefile | 441 -- tre.pc | 10 - tre.pc.in | 10 - tre.spec | 114 - tre.spec.in | 114 - utils/Makefile | 359 - win32/config.h | 183 - win32/retest.dsp | 94 - win32/tre-config.h | 52 - win32/tre.def | 23 - win32/tre.dsp | 200 - win32/tre.dsw | 43 - 50 files changed, 45166 deletions(-) delete mode 100644 Makefile delete mode 100644 Makefile.am delete mode 100644 Makefile.in delete mode 100644 aclocal.m4 delete mode 100644 config.h delete mode 100644 config.h.in delete mode 100644 config.log delete mode 100755 config.status delete mode 100755 configure delete mode 100644 configure.ac delete mode 100644 doc/Makefile delete mode 100644 lib/Makefile delete mode 100644 lib/stamp-h2 delete mode 100644 lib/tre-config.h delete mode 100755 libtool delete mode 100644 m4/Makefile delete mode 100644 m4/Makefile.am delete mode 100644 m4/Makefile.in delete mode 100644 m4/ac_libtool_tags.m4 delete mode 100644 m4/ax_check_funcs_comp.m4 delete mode 100644 m4/ax_check_sign.m4 delete mode 100644 m4/ax_decl_wchar_max.m4 delete mode 100644 m4/gettext.m4 delete mode 100644 m4/iconv.m4 delete mode 100644 m4/intlmacosx.m4 delete mode 100644 m4/lib-ld.m4 delete mode 100644 m4/lib-link.m4 delete mode 100644 m4/lib-prefix.m4 delete mode 100644 m4/nls.m4 delete mode 100644 m4/po.m4 delete mode 100644 m4/progtest.m4 delete mode 100644 m4/vl_prog_cc_warnings.m4 delete mode 100644 po/Makefile delete mode 100644 po/Makefile.in delete mode 100644 po/POTFILES delete mode 100644 src/Makefile delete mode 100644 stamp-h1 delete mode 100644 tests/Makefile delete mode 100644 tests/agrep/Makefile delete mode 100644 tre.pc delete mode 100644 tre.pc.in delete mode 100644 tre.spec delete mode 100644 tre.spec.in delete mode 100644 utils/Makefile delete mode 100644 win32/config.h delete mode 100644 win32/retest.dsp delete mode 100644 win32/tre-config.h delete mode 100644 win32/tre.def delete mode 100644 win32/tre.dsp delete mode 100644 win32/tre.dsw diff --git a/Makefile b/Makefile deleted file mode 100644 index 5374697dd6882..0000000000000 --- a/Makefile +++ /dev/null @@ -1,713 +0,0 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. -# Makefile. Generated from Makefile.in by configure. - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - - -pkgdatadir = $(datadir)/tre -pkglibdir = $(libdir)/tre -pkgincludedir = $(includedir)/tre -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = x86_64-unknown-freebsd8.0 -host_triplet = x86_64-unknown-freebsd8.0 -target_triplet = x86_64-unknown-freebsd8.0 -subdir = . -DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - $(srcdir)/tre.pc.in $(srcdir)/tre.spec.in \ - $(top_srcdir)/configure ABOUT-NLS AUTHORS ChangeLog INSTALL \ - NEWS THANKS TODO -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/ac_libtool_tags.m4 \ - $(top_srcdir)/m4/ax_check_funcs_comp.m4 \ - $(top_srcdir)/m4/ax_check_sign.m4 \ - $(top_srcdir)/m4/ax_decl_wchar_max.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \ - $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ - $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/m4/vl_prog_cc_warnings.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(SHELL) $(top_srcdir)/utils/mkinstalldirs -CONFIG_HEADER = config.h $(top_builddir)/lib/tre-config.h -CONFIG_CLEAN_FILES = tre.pc tre.spec -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; -am__installdirs = "$(DESTDIR)$(pkgconfigdir)" -pkgconfigDATA_INSTALL = $(INSTALL_DATA) -DATA = $(pkgconfig_DATA) -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = lib src doc tests utils po m4 -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } -DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best -distuninstallcheck_listfiles = find . -type f -print -distcleancheck_listfiles = find . -type f -print -ACLOCAL = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run aclocal-1.10 -ALLOCA = -AMTAR = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run tar -AR = ar -AS = as -AUTOCONF = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoconf -AUTOHEADER = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoheader -AUTOMAKE = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run automake-1.10 -AWK = nawk -CC = gcc -CCDEPMODE = depmode=gcc3 -CFLAGS = -g -O2 -Wall -CPP = gcc -E -CPPFLAGS = -CYGPATH_W = echo -DEFS = -DHAVE_CONFIG_H -DEPDIR = .deps -DLLTOOL = dlltool -DSYMUTIL = -ECHO = echo -ECHO_C = -ECHO_N = -n -ECHO_T = -EGREP = /usr/bin/grep -E -EXEEXT = -GETTEXT_MACRO_VERSION = 0.17 -GMSGFMT = /usr/local/bin/msgfmt -GMSGFMT_015 = /usr/local/bin/msgfmt -GREP = /usr/bin/grep -INSTALL = /usr/bin/install -c -INSTALL_DATA = ${INSTALL} -m 644 -INSTALL_PROGRAM = ${INSTALL} -INSTALL_SCRIPT = ${INSTALL} -INSTALL_STRIP_PROGRAM = $(install_sh) -c -s -INTLLIBS = -INTL_MACOSX_LIBS = -LDFLAGS = -LIBICONV = /usr/local/lib/libiconv.so -Wl,-rpath -Wl,/usr/local/lib -LIBINTL = -LIBOBJS = -LIBS = -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LN_S = ln -s -LTLIBICONV = -L/usr/local/lib -liconv -R/usr/local/lib -LTLIBINTL = -LTLIBOBJS = -MAKEINFO = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run makeinfo -MKDIR_P = utils/install-sh -c -d -MSGFMT = /usr/local/bin/msgfmt -MSGFMT_015 = /usr/local/bin/msgfmt -MSGMERGE = /usr/local/bin/msgmerge -NMEDIT = -OBJDUMP = objdump -OBJEXT = o -PACKAGE = tre -PACKAGE_BUGREPORT = tre-general@lists.laurikari.net -PACKAGE_NAME = TRE -PACKAGE_STRING = TRE 0.8.0 -PACKAGE_TARNAME = tre -PACKAGE_VERSION = 0.8.0 -PATH_SEPARATOR = : -POSUB = -RANLIB = ranlib -SED = /usr/local/bin/gsed -SET_MAKE = -SHELL = /bin/sh -STRIP = strip -TRE_VERSION = 0.8.0 -USE_NLS = no -VERSION = 0.8.0 -XGETTEXT = /usr/local/bin/xgettext -XGETTEXT_015 = /usr/local/bin/xgettext -XGETTEXT_EXTRA_OPTIONS = -abs_builddir = /home/gabor/wrk/tre/tre-0.8.0 -abs_srcdir = /home/gabor/wrk/tre/tre-0.8.0 -abs_top_builddir = /home/gabor/wrk/tre/tre-0.8.0 -abs_top_srcdir = /home/gabor/wrk/tre/tre-0.8.0 -ac_ct_CC = gcc -am__include = include -am__leading_dot = . -am__quote = -am__tar = ${AMTAR} chof - "$$tardir" -am__untar = ${AMTAR} xf - -bindir = ${exec_prefix}/bin -build = x86_64-unknown-freebsd8.0 -build_alias = -build_cpu = x86_64 -build_os = freebsd8.0 -build_vendor = unknown -builddir = . -datadir = ${datarootdir} -datarootdir = ${prefix}/share -docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} -dvidir = ${docdir} -exec_prefix = ${prefix} -host = x86_64-unknown-freebsd8.0 -host_alias = -host_cpu = x86_64 -host_os = freebsd8.0 -host_vendor = unknown -htmldir = ${docdir} -includedir = ${prefix}/include -infodir = ${datarootdir}/info -install_sh = $(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh -libdir = ${exec_prefix}/lib -libexecdir = ${exec_prefix}/libexec -localedir = ${datarootdir}/locale -localstatedir = ${prefix}/var -mandir = ${datarootdir}/man -mkdir_p = $(top_builddir)/utils/install-sh -c -d -oldincludedir = /usr/include -pdfdir = ${docdir} -prefix = /usr/local -program_transform_name = s,x,x, -psdir = ${docdir} -sbindir = ${exec_prefix}/sbin -sharedstatedir = ${prefix}/com -srcdir = . -sysconfdir = ${prefix}/etc -target = x86_64-unknown-freebsd8.0 -target_alias = -target_cpu = x86_64 -target_os = freebsd8.0 -target_vendor = unknown -top_builddir = . -top_srcdir = . -#agrep_dirs = -agrep_dirs = src doc -SUBDIRS = lib $(agrep_dirs) tests utils po m4 -EXTRA_DIST = \ - LICENSE \ - win32/tre-config.h win32/config.h \ - win32/tre.dsw \ - win32/tre.dsp win32/tre.def \ - win32/retest.dsp \ - python/tre-python.c \ - python/setup.py \ - python/example.py - -ACLOCAL_AMFLAGS = -I m4 -AC_CONFIG_AUX_DIR = utils -pkgconfigdir = $(libdir)/pkgconfig -pkgconfig_DATA = tre.pc -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -am--refresh: - @: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ - cd $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ - else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: $(am__configure_deps) - cd $(top_srcdir) && $(AUTOHEADER) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 -tre.pc: $(top_builddir)/config.status $(srcdir)/tre.pc.in - cd $(top_builddir) && $(SHELL) ./config.status $@ -tre.spec: $(top_builddir)/config.status $(srcdir)/tre.spec.in - cd $(top_builddir) && $(SHELL) ./config.status $@ - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -install-pkgconfigDATA: $(pkgconfig_DATA) - @$(NORMAL_INSTALL) - test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" - @list='$(pkgconfig_DATA)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ - $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ - done - -uninstall-pkgconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(pkgconfig_DATA)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ - rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ - done - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d $(distdir) || mkdir $(distdir) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - distdir) \ - || exit 1; \ - fi; \ - done - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -dist-lzma: distdir - tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma - $(am__remove_distdir) - -dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) - -dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) - -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lzma*) \ - unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst - chmod a-w $(distdir) - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @cd $(distuninstallcheck_dir) \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile $(DATA) config.h -installdirs: installdirs-recursive -installdirs-am: - for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr \ - distclean-libtool distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -info: info-recursive - -info-am: - -install-data-am: install-pkgconfigDATA - -install-dvi: install-dvi-recursive - -install-exec-am: - -install-html: install-html-recursive - -install-info: install-info-recursive - -install-man: - -install-pdf: install-pdf-recursive - -install-ps: install-ps-recursive - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-pkgconfigDATA - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am am--refresh check check-am clean clean-generic \ - clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ - dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \ - distclean distclean-generic distclean-hdr distclean-libtool \ - distclean-tags distcleancheck distdir distuninstallcheck dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am tags tags-recursive uninstall uninstall-am \ - uninstall-pkgconfigDATA - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/Makefile.am b/Makefile.am deleted file mode 100644 index 31ba03adcec2d..0000000000000 --- a/Makefile.am +++ /dev/null @@ -1,25 +0,0 @@ -## Process this file with automake to produce Makefile.in - -if TRE_AGREP -agrep_dirs = src doc -else -agrep_dirs = -endif - -SUBDIRS = lib $(agrep_dirs) tests utils po m4 - -EXTRA_DIST = \ - LICENSE \ - win32/tre-config.h win32/config.h \ - win32/tre.dsw \ - win32/tre.dsp win32/tre.def \ - win32/retest.dsp \ - python/tre-python.c \ - python/setup.py \ - python/example.py - -ACLOCAL_AMFLAGS = -I m4 -AC_CONFIG_AUX_DIR = utils - -pkgconfigdir = $(libdir)/pkgconfig -pkgconfig_DATA = tre.pc diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index 843309f93987d..0000000000000 --- a/Makefile.in +++ /dev/null @@ -1,713 +0,0 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = . -DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - $(srcdir)/tre.pc.in $(srcdir)/tre.spec.in \ - $(top_srcdir)/configure ABOUT-NLS AUTHORS ChangeLog INSTALL \ - NEWS THANKS TODO -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/ac_libtool_tags.m4 \ - $(top_srcdir)/m4/ax_check_funcs_comp.m4 \ - $(top_srcdir)/m4/ax_check_sign.m4 \ - $(top_srcdir)/m4/ax_decl_wchar_max.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \ - $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ - $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/m4/vl_prog_cc_warnings.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(SHELL) $(top_srcdir)/utils/mkinstalldirs -CONFIG_HEADER = config.h $(top_builddir)/lib/tre-config.h -CONFIG_CLEAN_FILES = tre.pc tre.spec -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; -am__installdirs = "$(DESTDIR)$(pkgconfigdir)" -pkgconfigDATA_INSTALL = $(INSTALL_DATA) -DATA = $(pkgconfig_DATA) -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = lib src doc tests utils po m4 -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } -DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best -distuninstallcheck_listfiles = find . -type f -print -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -ALLOCA = @ALLOCA@ -AMTAR = @AMTAR@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -TRE_VERSION = @TRE_VERSION@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -@TRE_AGREP_FALSE@agrep_dirs = -@TRE_AGREP_TRUE@agrep_dirs = src doc -SUBDIRS = lib $(agrep_dirs) tests utils po m4 -EXTRA_DIST = \ - LICENSE \ - win32/tre-config.h win32/config.h \ - win32/tre.dsw \ - win32/tre.dsp win32/tre.def \ - win32/retest.dsp \ - python/tre-python.c \ - python/setup.py \ - python/example.py - -ACLOCAL_AMFLAGS = -I m4 -AC_CONFIG_AUX_DIR = utils -pkgconfigdir = $(libdir)/pkgconfig -pkgconfig_DATA = tre.pc -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -am--refresh: - @: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ - cd $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ - else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: $(am__configure_deps) - cd $(top_srcdir) && $(AUTOHEADER) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 -tre.pc: $(top_builddir)/config.status $(srcdir)/tre.pc.in - cd $(top_builddir) && $(SHELL) ./config.status $@ -tre.spec: $(top_builddir)/config.status $(srcdir)/tre.spec.in - cd $(top_builddir) && $(SHELL) ./config.status $@ - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool -install-pkgconfigDATA: $(pkgconfig_DATA) - @$(NORMAL_INSTALL) - test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" - @list='$(pkgconfig_DATA)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ - $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ - done - -uninstall-pkgconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(pkgconfig_DATA)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ - rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ - done - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d $(distdir) || mkdir $(distdir) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - distdir) \ - || exit 1; \ - fi; \ - done - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -dist-lzma: distdir - tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma - $(am__remove_distdir) - -dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) - -dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) - -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lzma*) \ - unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst - chmod a-w $(distdir) - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @cd $(distuninstallcheck_dir) \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile $(DATA) config.h -installdirs: installdirs-recursive -installdirs-am: - for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr \ - distclean-libtool distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -info: info-recursive - -info-am: - -install-data-am: install-pkgconfigDATA - -install-dvi: install-dvi-recursive - -install-exec-am: - -install-html: install-html-recursive - -install-info: install-info-recursive - -install-man: - -install-pdf: install-pdf-recursive - -install-ps: install-ps-recursive - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-pkgconfigDATA - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am am--refresh check check-am clean clean-generic \ - clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ - dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \ - distclean distclean-generic distclean-hdr distclean-libtool \ - distclean-tags distcleancheck distdir distuninstallcheck dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am tags tags-recursive uninstall uninstall-am \ - uninstall-pkgconfigDATA - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/aclocal.m4 b/aclocal.m4 deleted file mode 100644 index 78a3424989cc8..0000000000000 --- a/aclocal.m4 +++ /dev/null @@ -1,7568 +0,0 @@ -# generated automatically by aclocal 1.10.1 -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(AC_AUTOCONF_VERSION, [2.61],, -[m4_warning([this file was generated for autoconf 2.61. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically `autoreconf'.])]) - -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- - -# serial 52 Debian 1.5.26-1ubuntu1 AC_PROG_LIBTOOL - - -# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) -# ----------------------------------------------------------- -# If this macro is not defined by Autoconf, define it here. -m4_ifdef([AC_PROVIDE_IFELSE], - [], - [m4_define([AC_PROVIDE_IFELSE], - [m4_ifdef([AC_PROVIDE_$1], - [$2], [$3])])]) - - -# AC_PROG_LIBTOOL -# --------------- -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl -dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX -dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. - AC_PROVIDE_IFELSE([AC_PROG_CXX], - [AC_LIBTOOL_CXX], - [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX - ])]) -dnl And a similar setup for Fortran 77 support - AC_PROVIDE_IFELSE([AC_PROG_F77], - [AC_LIBTOOL_F77], - [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 -])]) - -dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. -dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run -dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. - AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [ifdef([AC_PROG_GCJ], - [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([A][M_PROG_GCJ], - [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([LT_AC_PROG_GCJ], - [define([LT_AC_PROG_GCJ], - defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) -])])# AC_PROG_LIBTOOL - - -# _AC_PROG_LIBTOOL -# ---------------- -AC_DEFUN([_AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl -AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl -AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -])# _AC_PROG_LIBTOOL - - -# AC_LIBTOOL_SETUP -# ---------------- -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.50)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl - -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl -AC_LIBTOOL_SYS_MAX_CMD_LEN -AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -AC_LIBTOOL_OBJDIR - -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -_LT_AC_PROG_ECHO_BACKSLASH - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] - -# Same as above, but do not quote variable references. -[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" - -AC_CHECK_TOOL(AR, ar, false) -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -_LT_CC_BASENAME([$compiler]) - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi - ;; -esac - -_LT_REQUIRED_DARWIN_CHECKS - -AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -AC_ARG_WITH([pic], - [AC_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) -test -z "$pic_mode" && pic_mode=default - -# Use C for the default configuration in the libtool script -tagname= -AC_LIBTOOL_LANG_C_CONFIG -_LT_AC_TAGCONFIG -])# AC_LIBTOOL_SETUP - - -# _LT_AC_SYS_COMPILER -# ------------------- -AC_DEFUN([_LT_AC_SYS_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_AC_SYS_COMPILER - - -# _LT_CC_BASENAME(CC) -# ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -AC_DEFUN([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -]) - - -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -AC_DEFUN([_LT_COMPILER_BOILERPLATE], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* -])# _LT_COMPILER_BOILERPLATE - - -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -AC_DEFUN([_LT_LINKER_BOILERPLATE], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* -])# _LT_LINKER_BOILERPLATE - -# _LT_REQUIRED_DARWIN_CHECKS -# -------------------------- -# Check for some things on darwin -AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[ - case $host_os in - rhapsody* | darwin*) - AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) - AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) - - AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], - [lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - echo "int foo(void){return 1;}" > conftest.c - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib ${wl}-single_module conftest.c - if test -f libconftest.dylib; then - lt_cv_apple_cc_single_mod=yes - rm -rf libconftest.dylib* - fi - rm conftest.c - fi]) - AC_CACHE_CHECK([for -exported_symbols_list linker flag], - [lt_cv_ld_exported_symbols_list], - [lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [lt_cv_ld_exported_symbols_list=yes], - [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS="$save_LDFLAGS" - ]) - case $host_os in - rhapsody* | darwin1.[[0123]]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[[012]]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" - fi - if test "$DSYMUTIL" != ":"; then - _lt_dsymutil="~$DSYMUTIL \$lib || :" - else - _lt_dsymutil= - fi - ;; - esac -]) - -# _LT_AC_SYS_LIBPATH_AIX -# ---------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_AC_SYS_LIBPATH_AIX - - -# _LT_AC_SHELL_INIT(ARG) -# ---------------------- -AC_DEFUN([_LT_AC_SHELL_INIT], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -$1 -AC_DIVERT_POP -])# _LT_AC_SHELL_INIT - - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[_LT_AC_SHELL_INIT([ -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null 2>&1 && unset CDPATH - -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string=`eval $cmd`) 2>/dev/null && - echo_test_string=`eval $cmd` && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(ECHO) -])])# _LT_AC_PROG_ECHO_BACKSLASH - - -# _LT_AC_LOCK -# ----------- -AC_DEFUN([_LT_AC_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; - ]) -esac - -need_locks="$enable_libtool_lock" - -])# _LT_AC_LOCK - - -# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], -[AC_REQUIRE([LT_AC_PROG_SED]) -AC_CACHE_CHECK([$1], [$2], - [$2=no - ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $rm conftest* -]) - -if test x"[$]$2" = xyes; then - ifelse([$5], , :, [$5]) -else - ifelse([$6], , :, [$6]) -fi -])# AC_LIBTOOL_COMPILER_OPTION - - -# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ------------------------------------------------------------ -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $rm -r conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - ifelse([$4], , :, [$4]) -else - ifelse([$5], , :, [$5]) -fi -])# AC_LIBTOOL_LINKER_OPTION - - -# AC_LIBTOOL_SYS_MAX_CMD_LEN -# -------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], -[# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ - = "XX$teststring") >/dev/null 2>&1 && - new_result=`expr "X$teststring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - teststring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -])# AC_LIBTOOL_SYS_MAX_CMD_LEN - - -# _LT_AC_CHECK_DLFCN -# ------------------ -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h)dnl -])# _LT_AC_CHECK_DLFCN - - -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# --------------------------------------------------------------------- -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_dlunknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF - - -# AC_LIBTOOL_DLOPEN_SELF -# ---------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -])# AC_LIBTOOL_DLOPEN_SELF - - -# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) -# --------------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler -AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . 2>&AS_MESSAGE_LOG_FD - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* -]) -])# AC_LIBTOOL_PROG_CC_C_O - - -# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) -# ----------------------------------------- -# Check to see if we can do hard links to lock some files if needed -AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], -[AC_REQUIRE([_LT_AC_LOCK])dnl - -hard_links="nottested" -if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS - - -# AC_LIBTOOL_OBJDIR -# ----------------- -AC_DEFUN([AC_LIBTOOL_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -])# AC_LIBTOOL_OBJDIR - - -# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) -# ---------------------------------------------- -# Check hardcoding attributes. -AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_AC_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ - test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - - # We can hardcode non-existant directories. - if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_AC_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_AC_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_AC_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH - - -# AC_LIBTOOL_SYS_LIB_STRIP -# ------------------------ -AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], -[striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) -fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -])# AC_LIBTOOL_SYS_LIB_STRIP - - -# AC_LIBTOOL_SYS_DYNAMIC_LINKER -# ----------------------------- -# PORTME Fill in your ld.so characteristics -AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -m4_if($1,[],[ -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else - lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[[lt_foo]]++; } - if (lt_freq[[lt_foo]] == 1) { print lt_foo; } -}'` - sys_lib_search_path_spec=`echo $lt_search_path_spec` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi]) -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[[4-9]]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[[45]]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[[123]]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ - freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix[[3-9]]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no - -AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec], -[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"]) -sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec], -[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"]) -sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi -])# AC_LIBTOOL_SYS_DYNAMIC_LINKER - - -# _LT_AC_TAGCONFIG -# ---------------- -AC_DEFUN([_LT_AC_TAGCONFIG], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_ARG_WITH([tags], - [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], - [include additional configurations @<:@automatic@:>@])], - [tagnames="$withval"]) - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - AC_MSG_WARN([output file `$ofile' does not exist]) - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) - else - AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) - fi - fi - if test -z "$LTCFLAGS"; then - eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" - fi - - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` - - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in - "") ;; - *) AC_MSG_ERROR([invalid tag name: $tagname]) - ;; - esac - - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - AC_MSG_ERROR([tag name \"$tagname\" already exists]) - fi - - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_LIBTOOL_LANG_CXX_CONFIG - else - tagname="" - fi - ;; - - F77) - if test -n "$F77" && test "X$F77" != "Xno"; then - AC_LIBTOOL_LANG_F77_CONFIG - else - tagname="" - fi - ;; - - GCJ) - if test -n "$GCJ" && test "X$GCJ" != "Xno"; then - AC_LIBTOOL_LANG_GCJ_CONFIG - else - tagname="" - fi - ;; - - RC) - AC_LIBTOOL_LANG_RC_CONFIG - ;; - - *) - AC_MSG_ERROR([Unsupported tag name: $tagname]) - ;; - esac - - # Append the new tag name to the list of available tags. - if test -n "$tagname" ; then - available_tags="$available_tags $tagname" - fi - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - AC_MSG_ERROR([unable to update list of available tagged configurations.]) - fi -fi -])# _LT_AC_TAGCONFIG - - -# AC_LIBTOOL_DLOPEN -# ----------------- -# enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], - [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_DLOPEN - - -# AC_LIBTOOL_WIN32_DLL -# -------------------- -# declare package support for building win32 DLLs -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_WIN32_DLL - - -# AC_ENABLE_SHARED([DEFAULT]) -# --------------------------- -# implement the --enable-shared flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([shared], - [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]AC_ENABLE_SHARED_DEFAULT) -])# AC_ENABLE_SHARED - - -# AC_DISABLE_SHARED -# ----------------- -# set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no) -])# AC_DISABLE_SHARED - - -# AC_ENABLE_STATIC([DEFAULT]) -# --------------------------- -# implement the --enable-static flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([static], - [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]AC_ENABLE_STATIC_DEFAULT) -])# AC_ENABLE_STATIC - - -# AC_DISABLE_STATIC -# ----------------- -# set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no) -])# AC_DISABLE_STATIC - - -# AC_ENABLE_FAST_INSTALL([DEFAULT]) -# --------------------------------- -# implement the --enable-fast-install flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([fast-install], - [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) -])# AC_ENABLE_FAST_INSTALL - - -# AC_DISABLE_FAST_INSTALL -# ----------------------- -# set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no) -])# AC_DISABLE_FAST_INSTALL - - -# AC_LIBTOOL_PICMODE([MODE]) -# -------------------------- -# implement the --with-pic flag -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default) -])# AC_LIBTOOL_PICMODE - - -# AC_PROG_EGREP -# ------------- -# This is predefined starting with Autoconf 2.54, so this conditional -# definition can be removed once we require Autoconf 2.54 or later. -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], -[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], - [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi]) - EGREP=$ac_cv_prog_egrep - AC_SUBST([EGREP]) -])]) - - -# AC_PATH_TOOL_PREFIX -# ------------------- -# find a file program which can recognize shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -])# AC_PATH_TOOL_PREFIX - - -# AC_PATH_MAGIC -# ------------- -# find a file program which can recognize a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# AC_PATH_MAGIC - - -# AC_PROG_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH([gnu-ld], - [AC_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no]) -AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[[3-9]]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -nto-qnx*) - lt_cv_deplibs_check_method=unknown - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown -])# AC_DEPLIBS_CHECK_METHOD - - -# AC_PROG_NM -# ---------- -# find the pathname to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -])# AC_PROG_NM - - -# AC_CHECK_LIBM -# ------------- -# check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -])# AC_CHECK_LIBM - - -# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl convenience library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that -# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, -# it is assumed to be `libltdl'. LIBLTDL will be prefixed with -# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' -# (note the single quotes!). If your package is not flat and you're not -# using automake, define top_builddir and top_srcdir appropriately in -# the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_CONVENIENCE - - -# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl installable library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that -# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, -# and an installed libltdl is not found, it is assumed to be `libltdl'. -# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and top_srcdir -# appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, lt_dlinit, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLINCL= - fi - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_INSTALLABLE - - -# AC_LIBTOOL_CXX -# -------------- -# enable support for C++ libraries -AC_DEFUN([AC_LIBTOOL_CXX], -[AC_REQUIRE([_LT_AC_LANG_CXX]) -])# AC_LIBTOOL_CXX - - -# _LT_AC_LANG_CXX -# --------------- -AC_DEFUN([_LT_AC_LANG_CXX], -[AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([_LT_AC_PROG_CXXCPP]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) -])# _LT_AC_LANG_CXX - -# _LT_AC_PROG_CXXCPP -# ------------------ -AC_DEFUN([_LT_AC_PROG_CXXCPP], -[ -AC_REQUIRE([AC_PROG_CXX]) -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_PROG_CXXCPP -fi -])# _LT_AC_PROG_CXXCPP - -# AC_LIBTOOL_F77 -# -------------- -# enable support for Fortran 77 libraries -AC_DEFUN([AC_LIBTOOL_F77], -[AC_REQUIRE([_LT_AC_LANG_F77]) -])# AC_LIBTOOL_F77 - - -# _LT_AC_LANG_F77 -# --------------- -AC_DEFUN([_LT_AC_LANG_F77], -[AC_REQUIRE([AC_PROG_F77]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) -])# _LT_AC_LANG_F77 - - -# AC_LIBTOOL_GCJ -# -------------- -# enable support for GCJ libraries -AC_DEFUN([AC_LIBTOOL_GCJ], -[AC_REQUIRE([_LT_AC_LANG_GCJ]) -])# AC_LIBTOOL_GCJ - - -# _LT_AC_LANG_GCJ -# --------------- -AC_DEFUN([_LT_AC_LANG_GCJ], -[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], - [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], - [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], - [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) -])# _LT_AC_LANG_GCJ - - -# AC_LIBTOOL_RC -# ------------- -# enable support for Windows resource files -AC_DEFUN([AC_LIBTOOL_RC], -[AC_REQUIRE([LT_AC_PROG_RC]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) -])# AC_LIBTOOL_RC - - -# AC_LIBTOOL_LANG_C_CONFIG -# ------------------------ -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) -AC_DEFUN([_LT_AC_LANG_C_CONFIG], -[lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF - -# Report which library types will actually be built -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_C_CONFIG - - -# AC_LIBTOOL_LANG_CXX_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) -AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], -[AC_LANG_PUSH(C++) -AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([_LT_AC_PROG_CXXCPP]) - -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_AC_TAGVAR(allow_undefined_flag, $1)= -_LT_AC_TAGVAR(always_export_symbols, $1)=no -_LT_AC_TAGVAR(archive_expsym_cmds, $1)= -_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_direct, $1)=no -_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -_LT_AC_TAGVAR(hardcode_minus_L, $1)=no -_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -_LT_AC_TAGVAR(hardcode_automatic, $1)=no -_LT_AC_TAGVAR(module_cmds, $1)= -_LT_AC_TAGVAR(module_expsym_cmds, $1)= -_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_AC_TAGVAR(no_undefined_flag, $1)= -_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= -_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Dependencies to place before and after the object being linked: -_LT_AC_TAGVAR(predep_objects, $1)= -_LT_AC_TAGVAR(postdep_objects, $1)= -_LT_AC_TAGVAR(predeps, $1)= -_LT_AC_TAGVAR(postdeps, $1)= -_LT_AC_TAGVAR(compiler_lib_search_path, $1)= -_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)= - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_LD=$LD -lt_save_GCC=$GCC -GCC=$GXX -lt_save_with_gnu_ld=$with_gnu_ld -lt_save_path_LD=$lt_cv_path_LD -if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx -else - $as_unset lt_cv_prog_gnu_ld -fi -if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX -else - $as_unset lt_cv_path_LD -fi -test -z "${LDCXX+set}" || LD=$LDCXX -CC=${CXX-"c++"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) - -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -else - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -fi - -if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - AC_PROG_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - -else - GXX=no - with_gnu_ld=no - wlarc= -fi - -# PORTME: fill in a description of your system's C++ link characteristics -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -_LT_AC_TAGVAR(ld_shlibs, $1)=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GXX" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - darwin* | rhapsody*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" - if test "$GXX" = yes ; then - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - if test "$lt_cv_apple_cc_single_mod" != "yes"; then - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" - fi - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - freebsd[[12]]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - freebsd-elf*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - ;; - gnu*) - ;; - hpux9*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) ;; - *) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - interix[[3-9]]*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' - fi - fi - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc*) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - m88k*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - openbsd2*) - # C++ shared libraries are fairly broken - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd='echo' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - osf3*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ - $rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | grep -v '^2\.7' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - fi - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - # So that behaviour is only enabled if SCOABSPATH is set to a - # non-empty value in the environment. Most likely only useful for - # creating official distributions of packages. - # This is a hack until libtool officially supports absolute path - # names for shared libraries. - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; -esac -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -_LT_AC_TAGVAR(GCC, $1)="$GXX" -_LT_AC_TAGVAR(LD, $1)="$LD" - -AC_LIBTOOL_POSTDEP_PREDEP($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC=$lt_save_CC -LDCXX=$LD -LD=$lt_save_LD -GCC=$lt_save_GCC -with_gnu_ldcxx=$with_gnu_ld -with_gnu_ld=$lt_save_with_gnu_ld -lt_cv_path_LDCXX=$lt_cv_path_LD -lt_cv_path_LD=$lt_save_path_LD -lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -])# AC_LIBTOOL_LANG_CXX_CONFIG - -# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) -# ------------------------------------ -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - # - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - if test "$solaris_use_stlport4" != yes; then - _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; -esac -]) -case " $_LT_AC_TAGVAR(postdeps, $1) " in -*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; -esac -])# AC_LIBTOOL_POSTDEP_PREDEP - -# AC_LIBTOOL_LANG_F77_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)]) -AC_DEFUN([_LT_AC_LANG_F77_CONFIG], -[AC_REQUIRE([AC_PROG_F77]) -AC_LANG_PUSH(Fortran 77) - -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_AC_TAGVAR(allow_undefined_flag, $1)= -_LT_AC_TAGVAR(always_export_symbols, $1)=no -_LT_AC_TAGVAR(archive_expsym_cmds, $1)= -_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_direct, $1)=no -_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -_LT_AC_TAGVAR(hardcode_minus_L, $1)=no -_LT_AC_TAGVAR(hardcode_automatic, $1)=no -_LT_AC_TAGVAR(module_cmds, $1)= -_LT_AC_TAGVAR(module_expsym_cmds, $1)= -_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_AC_TAGVAR(no_undefined_flag, $1)= -_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= -_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for f77 test sources. -ac_ext=f - -# Object file extension for compiled f77 test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="\ - subroutine t - return - end -" - -# Code to be used in simple link tests -lt_simple_link_test_code="\ - program t - end -" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${F77-"f77"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) - -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; -aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -_LT_AC_TAGVAR(GCC, $1)="$G77" -_LT_AC_TAGVAR(LD, $1)="$LD" - -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_F77_CONFIG - - -# AC_LIBTOOL_LANG_GCJ_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) -AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], -[AC_LANG_SAVE - -# Source file extension for Java test sources. -ac_ext=java - -# Object file extension for compiled Java test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" - -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${GCJ-"gcj"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds - -AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_RESTORE -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_GCJ_CONFIG - - -# AC_LIBTOOL_LANG_RC_CONFIG -# ------------------------- -# Ensure that the configuration vars for the Windows resource compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) -AC_DEFUN([_LT_AC_LANG_RC_CONFIG], -[AC_LANG_SAVE - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${RC-"windres"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) -_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_RESTORE -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_RC_CONFIG - - -# AC_LIBTOOL_CONFIG([TAGNAME]) -# ---------------------------- -# If TAGNAME is not passed, then create an initial libtool script -# with a default configuration from the untagged config vars. Otherwise -# add code to config.status for appending the configuration named by -# TAGNAME from the matching tagged config vars. -AC_DEFUN([AC_LIBTOOL_CONFIG], -[# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - _LT_AC_TAGVAR(compiler, $1) \ - _LT_AC_TAGVAR(CC, $1) \ - _LT_AC_TAGVAR(LD, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ - _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ - _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ - _LT_AC_TAGVAR(old_archive_cmds, $1) \ - _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ - _LT_AC_TAGVAR(predep_objects, $1) \ - _LT_AC_TAGVAR(postdep_objects, $1) \ - _LT_AC_TAGVAR(predeps, $1) \ - _LT_AC_TAGVAR(postdeps, $1) \ - _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ - _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \ - _LT_AC_TAGVAR(archive_cmds, $1) \ - _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ - _LT_AC_TAGVAR(postinstall_cmds, $1) \ - _LT_AC_TAGVAR(postuninstall_cmds, $1) \ - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ - _LT_AC_TAGVAR(allow_undefined_flag, $1) \ - _LT_AC_TAGVAR(no_undefined_flag, $1) \ - _LT_AC_TAGVAR(export_symbols_cmds, $1) \ - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ - _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ - _LT_AC_TAGVAR(hardcode_automatic, $1) \ - _LT_AC_TAGVAR(module_cmds, $1) \ - _LT_AC_TAGVAR(module_expsym_cmds, $1) \ - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ - _LT_AC_TAGVAR(fix_srcfile_path, $1) \ - _LT_AC_TAGVAR(exclude_expsyms, $1) \ - _LT_AC_TAGVAR(include_expsyms, $1); do - - case $var in - _LT_AC_TAGVAR(old_archive_cmds, $1) | \ - _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ - _LT_AC_TAGVAR(archive_cmds, $1) | \ - _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ - _LT_AC_TAGVAR(module_cmds, $1) | \ - _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ - _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\[$]0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` - ;; - esac - -ifelse([$1], [], - [cfgfile="${ofile}T" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - $rm -f "$cfgfile" - AC_MSG_NOTICE([creating $ofile])], - [cfgfile="$ofile"]) - - cat <<__EOF__ >> "$cfgfile" -ifelse([$1], [], -[#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e 1s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG], -[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS - -# A language-specific compiler. -CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) - -# Is the compiler the GNU C compiler? -with_gcc=$_LT_AC_TAGVAR(GCC, $1) - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_[]_LT_AC_TAGVAR(LD, $1) - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) - -# Commands used to build and install a shared archive. -archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) -archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) -module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) - -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1) - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to yes if exported symbols are required. -always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) - -# The commands to list exported symbols. -export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) - -# Symbols that must always be exported. -include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) - -ifelse([$1],[], -[# ### END LIBTOOL CONFIG], -[# ### END LIBTOOL TAG CONFIG: $tagname]) - -__EOF__ - -ifelse([$1],[], [ - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -]) -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi -])# AC_LIBTOOL_CONFIG - - -# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl - -_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - - AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI - - -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([LT_AC_PROG_SED]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -linux* | k*bsd*-gnu) - if test "$host_cpu" = ia64; then - symcode='[[ABCDGIRSTW]]' - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - fi - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris*) - symcode='[[BDRT]]' - ;; -sco3.2v5*) - symcode='[[DT]]' - ;; -sysv4.2uw2*) - symcode='[[DT]]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[[ABDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if grep ' nm_test_var$' "$nlist" >/dev/null; then - if grep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[[]] = -{ -EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE - - -# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) -# --------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], -[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= - -AC_MSG_CHECKING([for $compiler option to produce PIC]) - ifelse([$1],[CXX],[ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | os2* | pw32*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix[[4-9]]*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - KCC*) - # KAI C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - icpc* | ecpc*) - # Intel C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler. - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - esac - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd* | netbsdelf*-gnu) - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx*) - # Digital/Compaq C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc*) - # Lucid - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - vxworks*) - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - hpux9* | hpux10* | hpux11*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - newsos6) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - linux* | k*bsd*-gnu) - case $cc_basename in - icc* | ecc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - ccc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; - esac - ;; - esac - ;; - - osf3* | osf4* | osf5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - rdos*) - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; - esac - ;; - - sunos4*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - unicos*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - - uts4*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then - AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], - _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1), - [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" - ;; -esac - -# -# Check to make sure the static flag actually works. -# -wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" -AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], - _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1), - $lt_tmp_static_flag, - [], - [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) -]) - - -# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) -# ------------------------------------ -# See if the linker supports building shared libraries. -AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -ifelse([$1],[CXX],[ - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix[[4-9]]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - ;; - linux* | k*bsd*-gnu) - _LT_AC_TAGVAR(link_all_deplibs, $1)=no - ;; - *) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac - _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] -],[ - runpath_var= - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)= - _LT_AC_TAGVAR(archive_expsym_cmds, $1)= - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown - _LT_AC_TAGVAR(hardcode_automatic, $1)=no - _LT_AC_TAGVAR(module_cmds, $1)= - _LT_AC_TAGVAR(module_expsym_cmds, $1)= - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_AC_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. -dnl Note also adjust exclude_expsyms for C++ above. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - _LT_CC_BASENAME([$compiler]) - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[[3-9]]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - interix[[3-9]]*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - *) - tmp_sharedflag='-shared' ;; - esac - _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test $supports_anon_versioning = yes; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - _LT_AC_TAGVAR(link_all_deplibs, $1)=no - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - sunos4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then - runpath_var= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - # see comment about different semantics on the GNU ld section - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - bsdi[[45]]*) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi - ;; - - dgux*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - freebsd1*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - os2*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - solaris*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - fi - ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi -]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -# -# Do we need to explicitly link libc? -# -case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_AC_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $rm conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - else - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac - fi - ;; -esac -])# AC_LIBTOOL_PROG_LD_SHLIBS - - -# _LT_AC_FILE_LTDLL_C -# ------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ -])# _LT_AC_FILE_LTDLL_C - - -# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) -# --------------------------------- -AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) - - -# old names -AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) -AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) -AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) - -# This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL]) - -AC_DEFUN([LT_AC_PROG_GCJ], -[AC_CHECK_TOOL(GCJ, gcj, no) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS) -]) - -AC_DEFUN([LT_AC_PROG_RC], -[AC_CHECK_TOOL(RC, windres, no) -]) - - -# Cheap backport of AS_EXECUTABLE_P and required macros -# from Autoconf 2.59; we should not use $as_executable_p directly. - -# _AS_TEST_PREPARE -# ---------------- -m4_ifndef([_AS_TEST_PREPARE], -[m4_defun([_AS_TEST_PREPARE], -[if test -x / >/dev/null 2>&1; then - as_executable_p='test -x' -else - as_executable_p='test -f' -fi -])])# _AS_TEST_PREPARE - -# AS_EXECUTABLE_P -# --------------- -# Check whether a file is executable. -m4_ifndef([AS_EXECUTABLE_P], -[m4_defun([AS_EXECUTABLE_P], -[AS_REQUIRE([_AS_TEST_PREPARE])dnl -$as_executable_p $1[]dnl -])])# AS_EXECUTABLE_P - -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -# LT_AC_PROG_SED -# -------------- -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -AC_DEFUN([LT_AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_SUBST([SED]) -AC_MSG_RESULT([$SED]) -]) - -# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.10' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.10.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.10.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 8 - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 9 - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], UPC, [depcc="$UPC" am_compiler_list=], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -#serial 3 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2008 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 13 - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.60])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl -]) -]) - - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) - -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 3 - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo done -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 5 - -# AM_PROG_CC_C_O -# -------------- -# Like AC_PROG_CC_C_O, but changed for automake. -AC_DEFUN([AM_PROG_CC_C_O], -[AC_REQUIRE([AC_PROG_CC_C_O])dnl -AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -# FIXME: we rely on the cache variable name because -# there is no other way. -set dummy $CC -ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` -if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -dnl Make sure AC_PROG_CC is never called again, or it will override our -dnl setting of CC. -m4_define([AC_PROG_CC], - [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 5 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) - -# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_MKDIR_P -# --------------- -# Check for `mkdir -p'. -AC_DEFUN([AM_PROG_MKDIR_P], -[AC_PREREQ([2.60])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -dnl while keeping a definition of mkdir_p for backward compatibility. -dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -dnl Makefile.ins that do not define MKDIR_P, so we do our own -dnl adjustment using top_builddir (which is defined more often than -dnl MKDIR_P). -AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -case $mkdir_p in - [[\\/$]]* | ?:[[\\/]]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 3 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. -AM_MISSING_PROG([AMTAR], [tar]) -m4_if([$1], [v7], - [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi -done -rm -rf conftest.dir - -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - -m4_include([m4/ac_libtool_tags.m4]) -m4_include([m4/ax_check_funcs_comp.m4]) -m4_include([m4/ax_check_sign.m4]) -m4_include([m4/ax_decl_wchar_max.m4]) -m4_include([m4/gettext.m4]) -m4_include([m4/iconv.m4]) -m4_include([m4/intlmacosx.m4]) -m4_include([m4/lib-ld.m4]) -m4_include([m4/lib-link.m4]) -m4_include([m4/lib-prefix.m4]) -m4_include([m4/nls.m4]) -m4_include([m4/po.m4]) -m4_include([m4/progtest.m4]) -m4_include([m4/vl_prog_cc_warnings.m4]) diff --git a/config.h b/config.h deleted file mode 100644 index 2332394feb6aa..0000000000000 --- a/config.h +++ /dev/null @@ -1,259 +0,0 @@ -/* config.h. Generated from config.h.in by configure. */ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP - systems. This function is required for `alloca.c' support on those systems. - */ -/* #undef CRAY_STACKSEG_END */ - -/* Define to 1 if using `alloca.c'. */ -/* #undef C_ALLOCA */ - -/* Define to 1 if translation of program messages to the user's native - language is requested. */ -/* #undef ENABLE_NLS */ - -/* Define to 1 if you have `alloca', as a function or macro. */ -#define HAVE_ALLOCA 1 - -/* Define to 1 if you have and it should be used (not on Ultrix). - */ -/* #undef HAVE_ALLOCA_H */ - -/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the - CoreFoundation framework. */ -/* #undef HAVE_CFLOCALECOPYCURRENT */ - -/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in - the CoreFoundation framework. */ -/* #undef HAVE_CFPREFERENCESCOPYAPPVALUE */ - -/* Define if the GNU dcgettext() function is already present or preinstalled. - */ -/* #undef HAVE_DCGETTEXT */ - -/* Define to 1 if you have the header file. */ -#define HAVE_DLFCN_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_GETOPT_H 1 - -/* Define to 1 if you have the `getopt_long' function. */ -#define HAVE_GETOPT_LONG 1 - -/* Define if the GNU gettext() function is already present or preinstalled. */ -/* #undef HAVE_GETTEXT */ - -/* Define if you have the iconv() function and it works. */ -/* #undef HAVE_ICONV */ - -/* Define to 1 if you have the header file. */ -#define HAVE_INTTYPES_H 1 - -/* Define to 1 if you have the `isascii' function. */ -#define HAVE_ISASCII 1 - -/* Define to 1 if you have the `isblank' function. */ -#define HAVE_ISBLANK 1 - -/* Define to 1 if you have the `iswascii' function or macro. */ -#define HAVE_ISWASCII 1 - -/* Define to 1 if you have the `iswblank' function or macro. */ -#define HAVE_ISWBLANK 1 - -/* Define to 1 if you have the `iswctype' function or macro. */ -#define HAVE_ISWCTYPE 1 - -/* Define to 1 if you have the `iswlower' function or macro. */ -#define HAVE_ISWLOWER 1 - -/* Define to 1 if you have the `iswupper' function or macro. */ -#define HAVE_ISWUPPER 1 - -/* Define to 1 if you have the header file. */ -/* #undef HAVE_LIBUTF8_H */ - -/* Define to 1 if you have the `mbrtowc' function or macro. */ -#define HAVE_MBRTOWC 1 - -/* Define to 1 if the system has the type `mbstate_t'. */ -#define HAVE_MBSTATE_T 1 - -/* Define to 1 if you have the `mbtowc' function or macro. */ -/* #undef HAVE_MBTOWC */ - -/* Define to 1 if you have the header file. */ -#define HAVE_MEMORY_H 1 - -/* Define to 1 if you have the header file. */ -/* #undef HAVE_REGEX_H */ - -/* Define to 1 if the system has the type `reg_errcode_t'. */ -/* #undef HAVE_REG_ERRCODE_T */ - -/* Define to 1 if you have the header file. */ -#define HAVE_STDINT_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STDLIB_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STRINGS_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STRING_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_STAT_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_TYPES_H 1 - -/* Define to 1 if you have the `towlower' function or macro. */ -#define HAVE_TOWLOWER 1 - -/* Define to 1 if you have the `towupper' function or macro. */ -#define HAVE_TOWUPPER 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_UNISTD_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_WCHAR_H 1 - -/* Define to 1 if the system has the type `wchar_t'. */ -#define HAVE_WCHAR_T 1 - -/* Define to 1 if you have the `wcschr' function or macro. */ -#define HAVE_WCSCHR 1 - -/* Define to 1 if you have the `wcscpy' function or macro. */ -#define HAVE_WCSCPY 1 - -/* Define to 1 if you have the `wcslen' function or macro. */ -#define HAVE_WCSLEN 1 - -/* Define to 1 if you have the `wcsncpy' function or macro. */ -#define HAVE_WCSNCPY 1 - -/* Define to 1 if you have the `wcsrtombs' function or macro. */ -#define HAVE_WCSRTOMBS 1 - -/* Define to 1 if you have the `wcstombs' function or macro. */ -/* #undef HAVE_WCSTOMBS */ - -/* Define to 1 if you have the `wctype' function or macro. */ -#define HAVE_WCTYPE 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_WCTYPE_H 1 - -/* Define to 1 if the system has the type `wint_t'. */ -#define HAVE_WINT_T 1 - -/* Define if you want to disable debug assertions. */ -#define NDEBUG 1 - -/* Define to 1 if your C compiler doesn't accept -c and -o together. */ -/* #undef NO_MINUS_C_MINUS_O */ - -/* Name of package */ -#define PACKAGE "tre" - -/* Define to the address where bug reports for this package should be sent. */ -#define PACKAGE_BUGREPORT "tre-general@lists.laurikari.net" - -/* Define to the full name of this package. */ -#define PACKAGE_NAME "TRE" - -/* Define to the full name and version of this package. */ -#define PACKAGE_STRING "TRE 0.8.0" - -/* Define to the one symbol short name of this package. */ -#define PACKAGE_TARNAME "tre" - -/* Define to the version of this package. */ -#define PACKAGE_VERSION "0.8.0" - -/* If using the C implementation of alloca, define if you know the - direction of stack growth for your system; otherwise it will be - automatically deduced at runtime. - STACK_DIRECTION > 0 => grows toward higher addresses - STACK_DIRECTION < 0 => grows toward lower addresses - STACK_DIRECTION = 0 => direction of growth unknown */ -/* #undef STACK_DIRECTION */ - -/* Define to 1 if you have the ANSI C header files. */ -#define STDC_HEADERS 1 - -/* Define if you want to enable approximate matching functionality. */ -#define TRE_APPROX 1 - -/* Define if you want TRE to print debug messages to stdout. */ -/* #undef TRE_DEBUG */ - -/* Define to enable multibyte character set support. */ -#define TRE_MULTIBYTE 1 - -/* Define to a field in the regex_t struct where TRE should store a pointer to - the internal tre_tnfa_t structure */ -#define TRE_REGEX_T_FIELD value - -/* Define to the absolute path to the system regex.h */ -/* #undef TRE_SYSTEM_REGEX_H_PATH */ - -/* Define if you want TRE to use alloca() instead of malloc() when allocating - memory needed for regexec operations. */ -#define TRE_USE_ALLOCA 1 - -/* Define to include the system regex.h from TRE regex.h */ -/* #undef TRE_USE_SYSTEM_REGEX_H */ - -/* TRE version string. */ -#define TRE_VERSION "0.8.0" - -/* TRE version level 1. */ -#define TRE_VERSION_1 0 - -/* TRE version level 2. */ -#define TRE_VERSION_2 8 - -/* TRE version level 3. */ -#define TRE_VERSION_3 0 - -/* Define to enable wide character (wchar_t) support. */ -#define TRE_WCHAR 1 - -/* Version number of package */ -#define VERSION "0.8.0" - -/* Define to the maximum value of wchar_t if not already defined elsewhere */ -/* #undef WCHAR_MAX */ - -/* Define if wchar_t is signed */ -/* #undef WCHAR_T_SIGNED */ - -/* Define if wchar_t is unsigned */ -/* #undef WCHAR_T_UNSIGNED */ - -/* Number of bits in a file offset, on hosts where this is settable. */ -/* #undef _FILE_OFFSET_BITS */ - -/* Define to enable GNU extensions in glibc */ -#define _GNU_SOURCE 1 - -/* Define for large files, on AIX-style hosts. */ -/* #undef _LARGE_FILES */ - -/* Define on IRIX */ -/* #undef _REGCOMP_INTERNAL */ - -/* Define to empty if `const' does not conform to ANSI C. */ -/* #undef const */ - -/* Define to `__inline__' or `__inline' if that's what the C compiler - calls it, or to nothing if 'inline' is not supported under any name. */ -#ifndef __cplusplus -/* #undef inline */ -#endif diff --git a/config.h.in b/config.h.in deleted file mode 100644 index 7b79b8a57cc33..0000000000000 --- a/config.h.in +++ /dev/null @@ -1,258 +0,0 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP - systems. This function is required for `alloca.c' support on those systems. - */ -#undef CRAY_STACKSEG_END - -/* Define to 1 if using `alloca.c'. */ -#undef C_ALLOCA - -/* Define to 1 if translation of program messages to the user's native - language is requested. */ -#undef ENABLE_NLS - -/* Define to 1 if you have `alloca', as a function or macro. */ -#undef HAVE_ALLOCA - -/* Define to 1 if you have and it should be used (not on Ultrix). - */ -#undef HAVE_ALLOCA_H - -/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the - CoreFoundation framework. */ -#undef HAVE_CFLOCALECOPYCURRENT - -/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in - the CoreFoundation framework. */ -#undef HAVE_CFPREFERENCESCOPYAPPVALUE - -/* Define if the GNU dcgettext() function is already present or preinstalled. - */ -#undef HAVE_DCGETTEXT - -/* Define to 1 if you have the header file. */ -#undef HAVE_DLFCN_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_GETOPT_H - -/* Define to 1 if you have the `getopt_long' function. */ -#undef HAVE_GETOPT_LONG - -/* Define if the GNU gettext() function is already present or preinstalled. */ -#undef HAVE_GETTEXT - -/* Define if you have the iconv() function and it works. */ -#undef HAVE_ICONV - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if you have the `isascii' function. */ -#undef HAVE_ISASCII - -/* Define to 1 if you have the `isblank' function. */ -#undef HAVE_ISBLANK - -/* Define to 1 if you have the `iswascii' function or macro. */ -#undef HAVE_ISWASCII - -/* Define to 1 if you have the `iswblank' function or macro. */ -#undef HAVE_ISWBLANK - -/* Define to 1 if you have the `iswctype' function or macro. */ -#undef HAVE_ISWCTYPE - -/* Define to 1 if you have the `iswlower' function or macro. */ -#undef HAVE_ISWLOWER - -/* Define to 1 if you have the `iswupper' function or macro. */ -#undef HAVE_ISWUPPER - -/* Define to 1 if you have the header file. */ -#undef HAVE_LIBUTF8_H - -/* Define to 1 if you have the `mbrtowc' function or macro. */ -#undef HAVE_MBRTOWC - -/* Define to 1 if the system has the type `mbstate_t'. */ -#undef HAVE_MBSTATE_T - -/* Define to 1 if you have the `mbtowc' function or macro. */ -#undef HAVE_MBTOWC - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_REGEX_H - -/* Define to 1 if the system has the type `reg_errcode_t'. */ -#undef HAVE_REG_ERRCODE_T - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the `towlower' function or macro. */ -#undef HAVE_TOWLOWER - -/* Define to 1 if you have the `towupper' function or macro. */ -#undef HAVE_TOWUPPER - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_WCHAR_H - -/* Define to 1 if the system has the type `wchar_t'. */ -#undef HAVE_WCHAR_T - -/* Define to 1 if you have the `wcschr' function or macro. */ -#undef HAVE_WCSCHR - -/* Define to 1 if you have the `wcscpy' function or macro. */ -#undef HAVE_WCSCPY - -/* Define to 1 if you have the `wcslen' function or macro. */ -#undef HAVE_WCSLEN - -/* Define to 1 if you have the `wcsncpy' function or macro. */ -#undef HAVE_WCSNCPY - -/* Define to 1 if you have the `wcsrtombs' function or macro. */ -#undef HAVE_WCSRTOMBS - -/* Define to 1 if you have the `wcstombs' function or macro. */ -#undef HAVE_WCSTOMBS - -/* Define to 1 if you have the `wctype' function or macro. */ -#undef HAVE_WCTYPE - -/* Define to 1 if you have the header file. */ -#undef HAVE_WCTYPE_H - -/* Define to 1 if the system has the type `wint_t'. */ -#undef HAVE_WINT_T - -/* Define if you want to disable debug assertions. */ -#undef NDEBUG - -/* Define to 1 if your C compiler doesn't accept -c and -o together. */ -#undef NO_MINUS_C_MINUS_O - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* If using the C implementation of alloca, define if you know the - direction of stack growth for your system; otherwise it will be - automatically deduced at runtime. - STACK_DIRECTION > 0 => grows toward higher addresses - STACK_DIRECTION < 0 => grows toward lower addresses - STACK_DIRECTION = 0 => direction of growth unknown */ -#undef STACK_DIRECTION - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Define if you want to enable approximate matching functionality. */ -#undef TRE_APPROX - -/* Define if you want TRE to print debug messages to stdout. */ -#undef TRE_DEBUG - -/* Define to enable multibyte character set support. */ -#undef TRE_MULTIBYTE - -/* Define to a field in the regex_t struct where TRE should store a pointer to - the internal tre_tnfa_t structure */ -#undef TRE_REGEX_T_FIELD - -/* Define to the absolute path to the system regex.h */ -#undef TRE_SYSTEM_REGEX_H_PATH - -/* Define if you want TRE to use alloca() instead of malloc() when allocating - memory needed for regexec operations. */ -#undef TRE_USE_ALLOCA - -/* Define to include the system regex.h from TRE regex.h */ -#undef TRE_USE_SYSTEM_REGEX_H - -/* TRE version string. */ -#undef TRE_VERSION - -/* TRE version level 1. */ -#undef TRE_VERSION_1 - -/* TRE version level 2. */ -#undef TRE_VERSION_2 - -/* TRE version level 3. */ -#undef TRE_VERSION_3 - -/* Define to enable wide character (wchar_t) support. */ -#undef TRE_WCHAR - -/* Version number of package */ -#undef VERSION - -/* Define to the maximum value of wchar_t if not already defined elsewhere */ -#undef WCHAR_MAX - -/* Define if wchar_t is signed */ -#undef WCHAR_T_SIGNED - -/* Define if wchar_t is unsigned */ -#undef WCHAR_T_UNSIGNED - -/* Number of bits in a file offset, on hosts where this is settable. */ -#undef _FILE_OFFSET_BITS - -/* Define to enable GNU extensions in glibc */ -#undef _GNU_SOURCE - -/* Define for large files, on AIX-style hosts. */ -#undef _LARGE_FILES - -/* Define on IRIX */ -#undef _REGCOMP_INTERNAL - -/* Define to empty if `const' does not conform to ANSI C. */ -#undef const - -/* Define to `__inline__' or `__inline' if that's what the C compiler - calls it, or to nothing if 'inline' is not supported under any name. */ -#ifndef __cplusplus -#undef inline -#endif diff --git a/config.log b/config.log deleted file mode 100644 index 8f68670fbf936..0000000000000 --- a/config.log +++ /dev/null @@ -1,1010 +0,0 @@ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by TRE configure 0.8.0, which was -generated by GNU Autoconf 2.61. Invocation command line was - - $ ./configure --disable-nls - -## --------- ## -## Platform. ## -## --------- ## - -hostname = server.mypc.hu -uname -m = amd64 -uname -r = 8.0-RELEASE-p2 -uname -s = FreeBSD -uname -v = FreeBSD 8.0-RELEASE-p2 #0: Mon Feb 8 10:18:36 CET 2010 root@server.mypc.hu:/usr/src/sys/amd64/compile/SERVER - -/usr/bin/uname -p = amd64 -/bin/uname -X = unknown - -/bin/arch = unknown -/usr/bin/arch -k = unknown -/usr/convex/getsysinfo = unknown -/usr/bin/hostinfo = unknown -/bin/machine = unknown -/usr/bin/oslevel = unknown -/bin/universe = unknown - -PATH: /sbin -PATH: /bin -PATH: /usr/sbin -PATH: /usr/bin -PATH: /usr/games -PATH: /usr/local/sbin -PATH: /usr/local/bin -PATH: /usr/X11R6/bin -PATH: /home/gabor/bin - - -## ----------- ## -## Core tests. ## -## ----------- ## - -configure:2011: checking build system type -configure:2029: result: x86_64-unknown-freebsd8.0 -configure:2051: checking host system type -configure:2066: result: x86_64-unknown-freebsd8.0 -configure:2088: checking target system type -configure:2103: result: x86_64-unknown-freebsd8.0 -configure:2146: checking for a BSD-compatible install -configure:2202: result: /usr/bin/install -c -configure:2213: checking whether build environment is sane -configure:2256: result: yes -configure:2284: checking for a thread-safe mkdir -p -configure:2323: result: utils/install-sh -c -d -configure:2336: checking for gawk -configure:2366: result: no -configure:2336: checking for mawk -configure:2366: result: no -configure:2336: checking for nawk -configure:2352: found /usr/bin/nawk -configure:2363: result: nawk -configure:2374: checking whether make sets $(MAKE) -configure:2395: result: yes -configure:2634: checking for gcc -configure:2650: found /usr/bin/gcc -configure:2661: result: gcc -configure:2899: checking for C compiler version -configure:2906: gcc --version >&5 -gcc (GCC) 4.2.1 20070719 [FreeBSD] -Copyright (C) 2007 Free Software Foundation, Inc. -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -configure:2909: $? = 0 -configure:2916: gcc -v >&5 -Using built-in specs. -Target: amd64-undermydesk-freebsd -Configured with: FreeBSD/amd64 system compiler -Thread model: posix -gcc version 4.2.1 20070719 [FreeBSD] -configure:2919: $? = 0 -configure:2926: gcc -V >&5 -gcc: '-V' option must have argument -configure:2929: $? = 1 -configure:2952: checking for C compiler default output file name -configure:2979: gcc conftest.c >&5 -configure:2982: $? = 0 -configure:3020: result: a.out -configure:3037: checking whether the C compiler works -configure:3047: ./a.out -configure:3050: $? = 0 -configure:3067: result: yes -configure:3074: checking whether we are cross compiling -configure:3076: result: no -configure:3079: checking for suffix of executables -configure:3086: gcc -o conftest conftest.c >&5 -configure:3089: $? = 0 -configure:3113: result: -configure:3119: checking for suffix of object files -configure:3145: gcc -c conftest.c >&5 -configure:3148: $? = 0 -configure:3171: result: o -configure:3175: checking whether we are using the GNU C compiler -configure:3204: gcc -c conftest.c >&5 -configure:3210: $? = 0 -configure:3227: result: yes -configure:3232: checking whether gcc accepts -g -configure:3262: gcc -c -g conftest.c >&5 -configure:3268: $? = 0 -configure:3367: result: yes -configure:3384: checking for gcc option to accept ISO C89 -configure:3458: gcc -c -g -O2 conftest.c >&5 -configure:3464: $? = 0 -configure:3487: result: none needed -configure:3516: checking for style of include used by make -configure:3544: result: GNU -configure:3569: checking dependency style of gcc -configure:3660: result: gcc3 -configure:3680: checking how to run the C preprocessor -configure:3720: gcc -E conftest.c -configure:3726: $? = 0 -configure:3757: gcc -E conftest.c -conftest.c:10:28: error: ac_nonexistent.h: No such file or directory -configure:3763: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| #define PACKAGE_NAME "TRE" -| #define PACKAGE_TARNAME "tre" -| #define PACKAGE_VERSION "0.8.0" -| #define PACKAGE_STRING "TRE 0.8.0" -| #define PACKAGE_BUGREPORT "tre-general@lists.laurikari.net" -| #define PACKAGE "tre" -| #define VERSION "0.8.0" -| /* end confdefs.h. */ -| #include -configure:3796: result: gcc -E -configure:3825: gcc -E conftest.c -configure:3831: $? = 0 -configure:3862: gcc -E conftest.c -conftest.c:10:28: error: ac_nonexistent.h: No such file or directory -configure:3868: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| #define PACKAGE_NAME "TRE" -| #define PACKAGE_TARNAME "tre" -| #define PACKAGE_VERSION "0.8.0" -| #define PACKAGE_STRING "TRE 0.8.0" -| #define PACKAGE_BUGREPORT "tre-general@lists.laurikari.net" -| #define PACKAGE "tre" -| #define VERSION "0.8.0" -| /* end confdefs.h. */ -| #include -configure:3918: checking for a BSD-compatible install -configure:3974: result: /usr/bin/install -c -configure:3986: checking whether gcc and cc understand -c and -o together -configure:4021: gcc -c conftest.c -o conftest2.o >&5 -configure:4024: $? = 0 -configure:4030: gcc -c conftest.c -o conftest2.o >&5 -configure:4033: $? = 0 -configure:4044: cc -c conftest.c >&5 -configure:4047: $? = 0 -configure:4055: cc -c conftest.c -o conftest2.o >&5 -configure:4058: $? = 0 -configure:4064: cc -c conftest.c -o conftest2.o >&5 -configure:4067: $? = 0 -configure:4085: result: yes -configure:4222: checking for C compiler warning flags -configure:4315: result: -Wall -configure:4387: checking for an ANSI C-conforming const -configure:4462: gcc -c -g -O2 -Wall conftest.c >&5 -conftest.c: In function 'main': -conftest.c:45: warning: 't' is used uninitialized in this function -conftest.c:61: warning: 'b' is used uninitialized in this function -conftest.c:67: warning: 'cs[0]' is used uninitialized in this function -configure:4468: $? = 0 -configure:4483: result: yes -configure:4493: checking for inline -configure:4519: gcc -c -g -O2 -Wall conftest.c >&5 -configure:4525: $? = 0 -configure:4543: result: inline -configure:4569: checking for grep that handles long lines and -e -configure:4643: result: /usr/bin/grep -configure:4648: checking for egrep -configure:4726: result: /usr/bin/grep -E -configure:4731: checking for ANSI C header files -configure:4761: gcc -c -g -O2 -Wall conftest.c >&5 -configure:4767: $? = 0 -configure:4866: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:4869: $? = 0 -configure:4875: ./conftest -configure:4878: $? = 0 -configure:4895: result: yes -configure:4930: checking for sys/types.h -configure:4951: gcc -c -g -O2 -Wall conftest.c >&5 -configure:4957: $? = 0 -configure:4973: result: yes -configure:4930: checking for sys/stat.h -configure:4951: gcc -c -g -O2 -Wall conftest.c >&5 -configure:4957: $? = 0 -configure:4973: result: yes -configure:4930: checking for stdlib.h -configure:4951: gcc -c -g -O2 -Wall conftest.c >&5 -configure:4957: $? = 0 -configure:4973: result: yes -configure:4930: checking for string.h -configure:4951: gcc -c -g -O2 -Wall conftest.c >&5 -configure:4957: $? = 0 -configure:4973: result: yes -configure:4930: checking for memory.h -configure:4951: gcc -c -g -O2 -Wall conftest.c >&5 -configure:4957: $? = 0 -configure:4973: result: yes -configure:4930: checking for strings.h -configure:4951: gcc -c -g -O2 -Wall conftest.c >&5 -configure:4957: $? = 0 -configure:4973: result: yes -configure:4930: checking for inttypes.h -configure:4951: gcc -c -g -O2 -Wall conftest.c >&5 -configure:4957: $? = 0 -configure:4973: result: yes -configure:4930: checking for stdint.h -configure:4951: gcc -c -g -O2 -Wall conftest.c >&5 -configure:4957: $? = 0 -configure:4973: result: yes -configure:4930: checking for unistd.h -configure:4951: gcc -c -g -O2 -Wall conftest.c >&5 -configure:4957: $? = 0 -configure:4973: result: yes -configure:4987: checking for working alloca.h -configure:5014: gcc -o conftest -g -O2 -Wall conftest.c >&5 -conftest.c:27:20: error: alloca.h: No such file or directory -conftest.c: In function 'main': -conftest.c:31: warning: implicit declaration of function 'alloca' -conftest.c:31: warning: incompatible implicit declaration of built-in function 'alloca' -configure:5020: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| #define PACKAGE_NAME "TRE" -| #define PACKAGE_TARNAME "tre" -| #define PACKAGE_VERSION "0.8.0" -| #define PACKAGE_STRING "TRE 0.8.0" -| #define PACKAGE_BUGREPORT "tre-general@lists.laurikari.net" -| #define PACKAGE "tre" -| #define VERSION "0.8.0" -| #define TRE_VERSION "0.8.0" -| #define TRE_VERSION_1 0 -| #define TRE_VERSION_2 8 -| #define TRE_VERSION_3 0 -| #define NDEBUG 1 -| #define TRE_APPROX 1 -| #define _GNU_SOURCE 1 -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| /* end confdefs.h. */ -| #include -| int -| main () -| { -| char *p = (char *) alloca (2 * sizeof (int)); -| if (p) return 0; -| ; -| return 0; -| } -configure:5037: result: no -configure:5047: checking for alloca -configure:5094: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:5100: $? = 0 -configure:5117: result: yes -configure:5863: checking for isascii -configure:5919: gcc -o conftest -g -O2 -Wall conftest.c >&5 -conftest.c:53: warning: conflicting types for built-in function 'isascii' -configure:5925: $? = 0 -configure:5943: result: yes -configure:5863: checking for isblank -configure:5919: gcc -o conftest -g -O2 -Wall conftest.c >&5 -conftest.c:54: warning: conflicting types for built-in function 'isblank' -configure:5925: $? = 0 -configure:5943: result: yes -configure:5969: checking getopt.h usability -configure:5986: gcc -c -g -O2 -Wall conftest.c >&5 -configure:5992: $? = 0 -configure:6006: result: yes -configure:6010: checking getopt.h presence -configure:6025: gcc -E conftest.c -configure:6031: $? = 0 -configure:6045: result: yes -configure:6078: checking for getopt.h -configure:6086: result: yes -configure:6103: checking for getopt_long -configure:6159: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:6165: $? = 0 -configure:6183: result: yes -configure:6296: checking for libutf8 -configure:6341: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:6347: $? = 0 -configure:6427: result: not needed -configure:6616: checking wchar.h usability -configure:6633: gcc -c -g -O2 -Wall conftest.c >&5 -configure:6639: $? = 0 -configure:6653: result: yes -configure:6657: checking wchar.h presence -configure:6672: gcc -E conftest.c -configure:6678: $? = 0 -configure:6692: result: yes -configure:6725: checking for wchar.h -configure:6733: result: yes -configure:6616: checking wctype.h usability -configure:6633: gcc -c -g -O2 -Wall conftest.c >&5 -configure:6639: $? = 0 -configure:6653: result: yes -configure:6657: checking wctype.h presence -configure:6672: gcc -E conftest.c -configure:6678: $? = 0 -configure:6692: result: yes -configure:6725: checking for wctype.h -configure:6733: result: yes -configure:6767: checking for wchar_t -configure:6798: gcc -c -g -O2 -Wall conftest.c >&5 -configure:6804: $? = 0 -configure:6819: result: yes -configure:6829: checking whether WCHAR_MAX is defined -configure:6860: gcc -c -g -O2 -Wall conftest.c >&5 -conftest.c: In function 'main': -conftest.c:46: warning: statement with no effect -configure:6866: $? = 0 -configure:6881: result: yes -configure:6981: checking for wint_t -configure:7012: gcc -c -g -O2 -Wall conftest.c >&5 -configure:7018: $? = 0 -configure:7033: result: yes -configure:7050: checking for mbstate_t -configure:7081: gcc -c -g -O2 -Wall conftest.c >&5 -configure:7087: $? = 0 -configure:7102: result: yes -configure:7123: checking for wcsrtombs -configure:7152: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7158: $? = 0 -configure:7176: result: yes -configure:7211: checking for iswlower -configure:7240: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7246: $? = 0 -configure:7264: result: yes -configure:7211: checking for iswupper -configure:7240: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7246: $? = 0 -configure:7264: result: yes -configure:7211: checking for towlower -configure:7240: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7246: $? = 0 -configure:7264: result: yes -configure:7211: checking for towupper -configure:7240: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7246: $? = 0 -configure:7264: result: yes -configure:7211: checking for wcschr -configure:7240: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7246: $? = 0 -configure:7264: result: yes -configure:7211: checking for wcscpy -configure:7240: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7246: $? = 0 -configure:7264: result: yes -configure:7211: checking for wcslen -configure:7240: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7246: $? = 0 -configure:7264: result: yes -configure:7211: checking for wcsncpy -configure:7240: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7246: $? = 0 -configure:7264: result: yes -configure:7316: checking for wctype -configure:7345: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7351: $? = 0 -configure:7369: result: yes -configure:7316: checking for iswctype -configure:7345: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7351: $? = 0 -configure:7369: result: yes -configure:7390: checking for iswascii -configure:7419: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7425: $? = 0 -configure:7443: result: yes -configure:7390: checking for iswblank -configure:7419: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7425: $? = 0 -configure:7443: result: yes -configure:7489: checking for mbrtowc -configure:7518: gcc -o conftest -g -O2 -Wall conftest.c >&5 -configure:7524: $? = 0 -configure:7542: result: yes -configure:7612: checking for special C compiler options needed for large files -configure:7705: result: no -configure:7711: checking for _FILE_OFFSET_BITS value needed for large files -configure:7746: gcc -c -g -O2 -Wall conftest.c >&5 -configure:7752: $? = 0 -configure:7820: result: no -configure:7957: checking whether NLS is requested -configure:7966: result: no -configure:8007: checking for msgfmt -configure: trying /usr/local/bin/msgfmt... -0 translated messages. -configure:8039: result: /usr/local/bin/msgfmt -configure:8048: checking for gmsgfmt -configure:8079: result: /usr/local/bin/msgfmt -configure:8130: checking for xgettext -configure: trying /usr/local/bin/xgettext... -/usr/local/bin/xgettext: warning: file `/dev/null' extension `' is unknown; will try C -configure:8162: result: /usr/local/bin/xgettext -configure:8208: checking for msgmerge -configure: trying /usr/local/bin/msgmerge... -configure:8239: result: /usr/local/bin/msgmerge -configure:8296: checking for ld used by GCC -configure:8360: result: /usr/bin/ld -configure:8369: checking if the linker (/usr/bin/ld) is GNU ld -configure:8382: result: yes -configure:8389: checking for shared library run path origin -configure:8402: result: done -configure:8903: checking for CFPreferencesCopyAppValue -configure:8931: gcc -o conftest -g -O2 -Wall conftest.c -Wl,-framework -Wl,CoreFoundation >&5 -conftest.c:55:42: error: CoreFoundation/CFPreferences.h: No such file or directory -conftest.c: In function 'main': -conftest.c:59: warning: implicit declaration of function 'CFPreferencesCopyAppValue' -conftest.c:59: error: 'NULL' undeclared (first use in this function) -conftest.c:59: error: (Each undeclared identifier is reported only once -conftest.c:59: error: for each function it appears in.) -configure:8937: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| #define PACKAGE_NAME "TRE" -| #define PACKAGE_TARNAME "tre" -| #define PACKAGE_VERSION "0.8.0" -| #define PACKAGE_STRING "TRE 0.8.0" -| #define PACKAGE_BUGREPORT "tre-general@lists.laurikari.net" -| #define PACKAGE "tre" -| #define VERSION "0.8.0" -| #define TRE_VERSION "0.8.0" -| #define TRE_VERSION_1 0 -| #define TRE_VERSION_2 8 -| #define TRE_VERSION_3 0 -| #define NDEBUG 1 -| #define TRE_APPROX 1 -| #define _GNU_SOURCE 1 -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_ALLOCA 1 -| #define TRE_USE_ALLOCA 1 -| #define TRE_REGEX_T_FIELD value -| #define HAVE_ISASCII 1 -| #define HAVE_ISBLANK 1 -| #define HAVE_GETOPT_H 1 -| #define HAVE_GETOPT_LONG 1 -| #define HAVE_WCHAR_H 1 -| #define HAVE_WCTYPE_H 1 -| #define HAVE_WCHAR_T 1 -| #define HAVE_WINT_T 1 -| #define HAVE_MBSTATE_T 1 -| #define HAVE_WCSRTOMBS 1 -| #define HAVE_ISWLOWER 1 -| #define HAVE_ISWUPPER 1 -| #define HAVE_TOWLOWER 1 -| #define HAVE_TOWUPPER 1 -| #define HAVE_WCSCHR 1 -| #define HAVE_WCSCPY 1 -| #define HAVE_WCSLEN 1 -| #define HAVE_WCSNCPY 1 -| #define TRE_WCHAR 1 -| #define HAVE_WCTYPE 1 -| #define HAVE_ISWCTYPE 1 -| #define HAVE_ISWASCII 1 -| #define HAVE_ISWBLANK 1 -| #define HAVE_MBRTOWC 1 -| #define TRE_MULTIBYTE 1 -| /* end confdefs.h. */ -| #include -| int -| main () -| { -| CFPreferencesCopyAppValue(NULL, NULL) -| ; -| return 0; -| } -configure:8955: result: no -configure:8964: checking for CFLocaleCopyCurrent -configure:8992: gcc -o conftest -g -O2 -Wall conftest.c -Wl,-framework -Wl,CoreFoundation >&5 -conftest.c:55:37: error: CoreFoundation/CFLocale.h: No such file or directory -conftest.c: In function 'main': -conftest.c:59: warning: implicit declaration of function 'CFLocaleCopyCurrent' -configure:8998: $? = 1 -configure: failed program was: -| /* confdefs.h. */ -| #define PACKAGE_NAME "TRE" -| #define PACKAGE_TARNAME "tre" -| #define PACKAGE_VERSION "0.8.0" -| #define PACKAGE_STRING "TRE 0.8.0" -| #define PACKAGE_BUGREPORT "tre-general@lists.laurikari.net" -| #define PACKAGE "tre" -| #define VERSION "0.8.0" -| #define TRE_VERSION "0.8.0" -| #define TRE_VERSION_1 0 -| #define TRE_VERSION_2 8 -| #define TRE_VERSION_3 0 -| #define NDEBUG 1 -| #define TRE_APPROX 1 -| #define _GNU_SOURCE 1 -| #define STDC_HEADERS 1 -| #define HAVE_SYS_TYPES_H 1 -| #define HAVE_SYS_STAT_H 1 -| #define HAVE_STDLIB_H 1 -| #define HAVE_STRING_H 1 -| #define HAVE_MEMORY_H 1 -| #define HAVE_STRINGS_H 1 -| #define HAVE_INTTYPES_H 1 -| #define HAVE_STDINT_H 1 -| #define HAVE_UNISTD_H 1 -| #define HAVE_ALLOCA 1 -| #define TRE_USE_ALLOCA 1 -| #define TRE_REGEX_T_FIELD value -| #define HAVE_ISASCII 1 -| #define HAVE_ISBLANK 1 -| #define HAVE_GETOPT_H 1 -| #define HAVE_GETOPT_LONG 1 -| #define HAVE_WCHAR_H 1 -| #define HAVE_WCTYPE_H 1 -| #define HAVE_WCHAR_T 1 -| #define HAVE_WINT_T 1 -| #define HAVE_MBSTATE_T 1 -| #define HAVE_WCSRTOMBS 1 -| #define HAVE_ISWLOWER 1 -| #define HAVE_ISWUPPER 1 -| #define HAVE_TOWLOWER 1 -| #define HAVE_TOWUPPER 1 -| #define HAVE_WCSCHR 1 -| #define HAVE_WCSCPY 1 -| #define HAVE_WCSLEN 1 -| #define HAVE_WCSNCPY 1 -| #define TRE_WCHAR 1 -| #define HAVE_WCTYPE 1 -| #define HAVE_ISWCTYPE 1 -| #define HAVE_ISWASCII 1 -| #define HAVE_ISWBLANK 1 -| #define HAVE_MBRTOWC 1 -| #define TRE_MULTIBYTE 1 -| /* end confdefs.h. */ -| #include -| int -| main () -| { -| CFLocaleCopyCurrent(); -| ; -| return 0; -| } -configure:9016: result: no -configure:10005: checking whether to use NLS -configure:10007: result: no -configure:10159: checking for a sed that does not truncate output -configure:10215: result: /usr/local/bin/gsed -configure:10229: checking for ld used by gcc -configure:10296: result: /usr/bin/ld -configure:10305: checking if the linker (/usr/bin/ld) is GNU ld -configure:10320: result: yes -configure:10325: checking for /usr/bin/ld option to reload object files -configure:10332: result: -r -configure:10350: checking for BSD-compatible nm -configure:10399: result: /usr/bin/nm -B -configure:10403: checking whether ln -s works -configure:10407: result: yes -configure:10414: checking how to recognize dependent libraries -configure:10600: result: pass_all -configure:11144: checking dlfcn.h usability -configure:11161: gcc -c -g -O2 -Wall conftest.c >&5 -configure:11167: $? = 0 -configure:11181: result: yes -configure:11185: checking dlfcn.h presence -configure:11200: gcc -E conftest.c -configure:11206: $? = 0 -configure:11220: result: yes -configure:11253: checking for dlfcn.h -configure:11261: result: yes -configure:11277: checking the maximum length of command line arguments -configure:11389: result: 196608 -configure:11401: checking command to parse /usr/bin/nm -B output from gcc object -configure:11506: gcc -c -g -O2 -Wall conftest.c >&5 -configure:11509: $? = 0 -configure:11513: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm -configure:11516: $? = 0 -configure:11568: gcc -o conftest -g -O2 -Wall conftest.c conftstm.o >&5 -configure:11571: $? = 0 -configure:11609: result: ok -configure:11613: checking for objdir -configure:11628: result: .libs -configure:11720: checking for ar -configure:11736: found /usr/bin/ar -configure:11747: result: ar -configure:11816: checking for ranlib -configure:11832: found /usr/bin/ranlib -configure:11843: result: ranlib -configure:11912: checking for strip -configure:11928: found /usr/bin/strip -configure:11939: result: strip -configure:12537: checking if gcc supports -fno-rtti -fno-exceptions -configure:12555: gcc -c -g -O2 -Wall -fno-rtti -fno-exceptions conftest.c >&5 -cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C -configure:12559: $? = 0 -configure:12572: result: no -configure:12587: checking for gcc option to produce PIC -configure:12819: result: -fPIC -configure:12827: checking if gcc PIC flag -fPIC works -configure:12845: gcc -c -g -O2 -Wall -fPIC -DPIC conftest.c >&5 -configure:12849: $? = 0 -configure:12862: result: yes -configure:12890: checking if gcc static flag -static works -configure:12918: result: yes -configure:12928: checking if gcc supports -c -o file.o -configure:12949: gcc -c -g -O2 -Wall -o out/conftest2.o conftest.c >&5 -configure:12953: $? = 0 -configure:12975: result: yes -configure:13001: checking whether the gcc linker (/usr/bin/ld) supports shared libraries -configure:13982: result: yes -configure:14003: checking whether -lc should be explicitly linked in -configure:14008: gcc -c -g -O2 -Wall conftest.c >&5 -configure:14011: $? = 0 -configure:14026: gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep -lc \>/dev/null 2\>\&1 -configure:14029: $? = 0 -configure:14041: result: no -configure:14049: checking dynamic linker characteristics -configure:14663: result: freebsd8.0 ld.so -configure:14687: checking how to hardcode library paths into programs -configure:14712: result: immediate -configure:14726: checking whether stripping libraries is possible -configure:14731: result: yes -configure:15533: checking if libtool supports shared libraries -configure:15535: result: yes -configure:15538: checking whether to build shared libraries -configure:15559: result: yes -configure:15562: checking whether to build static libraries -configure:15566: result: no -configure:15660: creating libtool -configure:16293: creating ./config.status - -## ---------------------- ## -## Running config.status. ## -## ---------------------- ## - -This file was extended by TRE config.status 0.8.0, which was -generated by GNU Autoconf 2.61. Invocation command line was - - CONFIG_FILES = - CONFIG_HEADERS = - CONFIG_LINKS = - CONFIG_COMMANDS = - $ ./config.status - -on server.mypc.hu - -config.status:710: creating Makefile -config.status:710: creating doc/Makefile -config.status:710: creating doc/agrep.1 -config.status:710: creating lib/Makefile -config.status:710: creating m4/Makefile -config.status:710: creating po/Makefile.in -config.status:710: creating src/Makefile -config.status:710: creating tests/Makefile -config.status:710: creating tests/agrep/Makefile -config.status:710: creating tre.pc -config.status:710: creating tre.spec -config.status:710: creating utils/Makefile -config.status:710: creating config.h -config.status:710: creating lib/tre-config.h -config.status:1027: executing depfiles commands -config.status:1027: executing po-directories commands - -## ---------------- ## -## Cache variables. ## -## ---------------- ## - -ac_cv_build=x86_64-unknown-freebsd8.0 -ac_cv_c_compiler_gnu=yes -ac_cv_c_const=yes -ac_cv_c_inline=inline -ac_cv_env_CC_set='' -ac_cv_env_CC_value='' -ac_cv_env_CFLAGS_set='' -ac_cv_env_CFLAGS_value='' -ac_cv_env_CPPFLAGS_set='' -ac_cv_env_CPPFLAGS_value='' -ac_cv_env_CPP_set='' -ac_cv_env_CPP_value='' -ac_cv_env_LDFLAGS_set='' -ac_cv_env_LDFLAGS_value='' -ac_cv_env_LIBS_set='' -ac_cv_env_LIBS_value='' -ac_cv_env_build_alias_set='' -ac_cv_env_build_alias_value='' -ac_cv_env_host_alias_set='' -ac_cv_env_host_alias_value='' -ac_cv_env_target_alias_set='' -ac_cv_env_target_alias_value='' -ac_cv_func_alloca_works=yes -ac_cv_func_getopt_long=yes -ac_cv_func_isascii=yes -ac_cv_func_isblank=yes -ac_cv_header_dlfcn_h=yes -ac_cv_header_getopt_h=yes -ac_cv_header_inttypes_h=yes -ac_cv_header_memory_h=yes -ac_cv_header_stdc=yes -ac_cv_header_stdint_h=yes -ac_cv_header_stdlib_h=yes -ac_cv_header_string_h=yes -ac_cv_header_strings_h=yes -ac_cv_header_sys_stat_h=yes -ac_cv_header_sys_types_h=yes -ac_cv_header_unistd_h=yes -ac_cv_header_wchar_h=yes -ac_cv_header_wctype_h=yes -ac_cv_host=x86_64-unknown-freebsd8.0 -ac_cv_objext=o -ac_cv_path_EGREP='/usr/bin/grep -E' -ac_cv_path_GMSGFMT=/usr/local/bin/msgfmt -ac_cv_path_GREP=/usr/bin/grep -ac_cv_path_MSGFMT=/usr/local/bin/msgfmt -ac_cv_path_MSGMERGE=/usr/local/bin/msgmerge -ac_cv_path_XGETTEXT=/usr/local/bin/xgettext -ac_cv_path_install='/usr/bin/install -c' -ac_cv_prog_AWK=nawk -ac_cv_prog_CPP='gcc -E' -ac_cv_prog_ac_ct_AR=ar -ac_cv_prog_ac_ct_CC=gcc -ac_cv_prog_ac_ct_RANLIB=ranlib -ac_cv_prog_ac_ct_STRIP=strip -ac_cv_prog_cc_c89='' -ac_cv_prog_cc_g=yes -ac_cv_prog_cc_gcc_c_o=yes -ac_cv_prog_make_make_set=yes -ac_cv_sys_file_offset_bits=no -ac_cv_sys_largefile_CC=no -ac_cv_target=x86_64-unknown-freebsd8.0 -ac_cv_type_mbstate_t=yes -ac_cv_type_wchar_t=yes -ac_cv_type_wint_t=yes -ac_cv_working_alloca_h=no -acl_cv_hardcode_direct=no -acl_cv_hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' -acl_cv_hardcode_libdir_separator='' -acl_cv_hardcode_minus_L=no -acl_cv_libext=a -acl_cv_libname_spec='lib$name' -acl_cv_library_names_spec='$libname$shrext' -acl_cv_path_LD=/usr/bin/ld -acl_cv_prog_gnu_ld=yes -acl_cv_rpath=done -acl_cv_shlibext=so -acl_cv_wl=-Wl, -am_cv_CC_dependencies_compiler_type=gcc3 -ax_cv_decl_wchar_max=yes -ax_cv_func_iswascii=yes -ax_cv_func_iswblank=yes -ax_cv_func_iswctype=yes -ax_cv_func_iswlower=yes -ax_cv_func_iswupper=yes -ax_cv_func_mbrtowc=yes -ax_cv_func_towlower=yes -ax_cv_func_towupper=yes -ax_cv_func_wcschr=yes -ax_cv_func_wcscpy=yes -ax_cv_func_wcslen=yes -ax_cv_func_wcsncpy=yes -ax_cv_func_wcsrtombs=yes -ax_cv_func_wctype=yes -gt_cv_func_CFLocaleCopyCurrent=no -gt_cv_func_CFPreferencesCopyAppValue=no -lt_cv_deplibs_check_method=pass_all -lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file='' -lt_cv_ld_reload_flag=-r -lt_cv_objdir=.libs -lt_cv_path_LD=/usr/bin/ld -lt_cv_path_NM='/usr/bin/nm -B' -lt_cv_path_SED=/usr/local/bin/gsed -lt_cv_prog_compiler_c_o=yes -lt_cv_prog_compiler_pic_works=yes -lt_cv_prog_compiler_rtti_exceptions=no -lt_cv_prog_compiler_static_works=yes -lt_cv_prog_gnu_ld=yes -lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\' -lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\' -lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern int \1;/p'\' -lt_cv_sys_lib_dlsearch_path_spec='/lib /usr/lib' -lt_cv_sys_lib_search_path_spec=/usr/lib -lt_cv_sys_max_cmd_len=196608 -lt_lt_cv_prog_compiler_c_o='"yes"' -lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[ ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ ][ ]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p'\''"' -lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'\''"' -lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .* \\(.*\\)\$/extern int \\1;/p'\''"' -vl_cv_prog_cc_warnings=-Wall - -## ----------------- ## -## Output variables. ## -## ----------------- ## - -ACLOCAL='${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run aclocal-1.10' -ALLOCA='' -AMDEPBACKSLASH='\' -AMDEP_FALSE='#' -AMDEP_TRUE='' -AMTAR='${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run tar' -AR='ar' -AS='as' -AUTOCONF='${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoconf' -AUTOHEADER='${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoheader' -AUTOMAKE='${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run automake-1.10' -AWK='nawk' -CC='gcc' -CCDEPMODE='depmode=gcc3' -CFLAGS='-g -O2 -Wall' -CPP='gcc -E' -CPPFLAGS='' -CYGPATH_W='echo' -DEFS='-DHAVE_CONFIG_H' -DEPDIR='.deps' -DLLTOOL='dlltool' -DSYMUTIL='' -ECHO='echo' -ECHO_C='' -ECHO_N='-n' -ECHO_T='' -EGREP='/usr/bin/grep -E' -EXEEXT='' -GETTEXT_MACRO_VERSION='0.17' -GMSGFMT='/usr/local/bin/msgfmt' -GMSGFMT_015='/usr/local/bin/msgfmt' -GREP='/usr/bin/grep' -INSTALL_DATA='${INSTALL} -m 644' -INSTALL_PROGRAM='${INSTALL}' -INSTALL_SCRIPT='${INSTALL}' -INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' -INTLLIBS='' -INTL_MACOSX_LIBS='' -LDFLAGS='' -LIBICONV='/usr/local/lib/libiconv.so -Wl,-rpath -Wl,/usr/local/lib' -LIBINTL='' -LIBOBJS='' -LIBS='' -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -LN_S='ln -s' -LTLIBICONV='-L/usr/local/lib -liconv -R/usr/local/lib' -LTLIBINTL='' -LTLIBOBJS='' -MAKEINFO='${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run makeinfo' -MSGFMT='/usr/local/bin/msgfmt' -MSGFMT_015='/usr/local/bin/msgfmt' -MSGMERGE='/usr/local/bin/msgmerge' -NMEDIT='' -OBJDUMP='objdump' -OBJEXT='o' -PACKAGE='tre' -PACKAGE_BUGREPORT='tre-general@lists.laurikari.net' -PACKAGE_NAME='TRE' -PACKAGE_STRING='TRE 0.8.0' -PACKAGE_TARNAME='tre' -PACKAGE_VERSION='0.8.0' -PATH_SEPARATOR=':' -POSUB='' -RANLIB='ranlib' -SED='/usr/local/bin/gsed' -SET_MAKE='' -SHELL='/bin/sh' -STRIP='strip' -TRE_AGREP_FALSE='#' -TRE_AGREP_TRUE='' -TRE_APPROX_FALSE='#' -TRE_APPROX_TRUE='' -TRE_DEBUG_FALSE='' -TRE_DEBUG_TRUE='#' -TRE_MULTIBYTE_FALSE='#' -TRE_MULTIBYTE_TRUE='' -TRE_PROFILE_FALSE='' -TRE_PROFILE_TRUE='#' -TRE_VERSION='0.8.0' -USE_NLS='no' -VERSION='0.8.0' -XGETTEXT='/usr/local/bin/xgettext' -XGETTEXT_015='/usr/local/bin/xgettext' -XGETTEXT_EXTRA_OPTIONS='' -ac_ct_CC='gcc' -am__fastdepCC_FALSE='#' -am__fastdepCC_TRUE='' -am__include='include' -am__isrc='' -am__leading_dot='.' -am__quote='' -am__tar='${AMTAR} chof - "$$tardir"' -am__untar='${AMTAR} xf -' -bindir='${exec_prefix}/bin' -build='x86_64-unknown-freebsd8.0' -build_alias='' -build_cpu='x86_64' -build_os='freebsd8.0' -build_vendor='unknown' -datadir='${datarootdir}' -datarootdir='${prefix}/share' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -dvidir='${docdir}' -exec_prefix='${prefix}' -host='x86_64-unknown-freebsd8.0' -host_alias='' -host_cpu='x86_64' -host_os='freebsd8.0' -host_vendor='unknown' -htmldir='${docdir}' -includedir='${prefix}/include' -infodir='${datarootdir}/info' -install_sh='$(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh' -libdir='${exec_prefix}/lib' -libexecdir='${exec_prefix}/libexec' -localedir='${datarootdir}/locale' -localstatedir='${prefix}/var' -mandir='${datarootdir}/man' -mkdir_p='$(top_builddir)/utils/install-sh -c -d' -oldincludedir='/usr/include' -pdfdir='${docdir}' -prefix='/usr/local' -program_transform_name='s,x,x,' -psdir='${docdir}' -sbindir='${exec_prefix}/sbin' -sharedstatedir='${prefix}/com' -sysconfdir='${prefix}/etc' -target='x86_64-unknown-freebsd8.0' -target_alias='' -target_cpu='x86_64' -target_os='freebsd8.0' -target_vendor='unknown' - -## ----------- ## -## confdefs.h. ## -## ----------- ## - -#define PACKAGE_NAME "TRE" -#define PACKAGE_TARNAME "tre" -#define PACKAGE_VERSION "0.8.0" -#define PACKAGE_STRING "TRE 0.8.0" -#define PACKAGE_BUGREPORT "tre-general@lists.laurikari.net" -#define PACKAGE "tre" -#define VERSION "0.8.0" -#define TRE_VERSION "0.8.0" -#define TRE_VERSION_1 0 -#define TRE_VERSION_2 8 -#define TRE_VERSION_3 0 -#define NDEBUG 1 -#define TRE_APPROX 1 -#define _GNU_SOURCE 1 -#define STDC_HEADERS 1 -#define HAVE_SYS_TYPES_H 1 -#define HAVE_SYS_STAT_H 1 -#define HAVE_STDLIB_H 1 -#define HAVE_STRING_H 1 -#define HAVE_MEMORY_H 1 -#define HAVE_STRINGS_H 1 -#define HAVE_INTTYPES_H 1 -#define HAVE_STDINT_H 1 -#define HAVE_UNISTD_H 1 -#define HAVE_ALLOCA 1 -#define TRE_USE_ALLOCA 1 -#define TRE_REGEX_T_FIELD value -#define HAVE_ISASCII 1 -#define HAVE_ISBLANK 1 -#define HAVE_GETOPT_H 1 -#define HAVE_GETOPT_LONG 1 -#define HAVE_WCHAR_H 1 -#define HAVE_WCTYPE_H 1 -#define HAVE_WCHAR_T 1 -#define HAVE_WINT_T 1 -#define HAVE_MBSTATE_T 1 -#define HAVE_WCSRTOMBS 1 -#define HAVE_ISWLOWER 1 -#define HAVE_ISWUPPER 1 -#define HAVE_TOWLOWER 1 -#define HAVE_TOWUPPER 1 -#define HAVE_WCSCHR 1 -#define HAVE_WCSCPY 1 -#define HAVE_WCSLEN 1 -#define HAVE_WCSNCPY 1 -#define TRE_WCHAR 1 -#define HAVE_WCTYPE 1 -#define HAVE_ISWCTYPE 1 -#define HAVE_ISWASCII 1 -#define HAVE_ISWBLANK 1 -#define HAVE_MBRTOWC 1 -#define TRE_MULTIBYTE 1 -#define HAVE_DLFCN_H 1 - -configure: exit 0 diff --git a/config.status b/config.status deleted file mode 100755 index 487e0c9fc60c2..0000000000000 --- a/config.status +++ /dev/null @@ -1,1276 +0,0 @@ -#! /bin/sh -# Generated by configure. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=${CONFIG_SHELL-/bin/sh} -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -as_nl=' -' -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } -fi - -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# CDPATH. -$as_unset CDPATH - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in --n*) - case `echo 'x\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; - esac;; -*) - ECHO_N='-n';; -esac - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir -fi -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 - -# Save the log message, to keep $[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by TRE $as_me 0.8.0, which was -generated by GNU Autoconf 2.61. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -# Files that config.status was made for. -config_files=" Makefile doc/Makefile doc/agrep.1 lib/Makefile m4/Makefile po/Makefile.in src/Makefile tests/Makefile tests/agrep/Makefile tre.pc tre.spec utils/Makefile" -config_headers=" config.h lib/tre-config.h" -config_commands=" depfiles po-directories" - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -ac_cs_version="\ -TRE config.status 0.8.0 -configured by ./configure, generated by GNU Autoconf 2.61, - with options \"'--disable-nls'\" - -Copyright (C) 2006 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='/home/gabor/wrk/tre/tre-0.8.0' -srcdir='.' -INSTALL='/usr/bin/install -c' -MKDIR_P='utils/install-sh -c -d' -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - echo "$ac_cs_version"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - { echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -if $ac_cs_recheck; then - echo "running CONFIG_SHELL=/bin/sh /bin/sh ./configure " '--disable-nls' $ac_configure_extra_args " --no-create --no-recursion" >&6 - CONFIG_SHELL=/bin/sh - export CONFIG_SHELL - exec /bin/sh "./configure" '--disable-nls' $ac_configure_extra_args --no-create --no-recursion -fi - -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - echo "$ac_log" -} >&5 - -# -# INIT-COMMANDS -# -AMDEP_TRUE="" ac_aux_dir="utils" -# Capture the value of obsolete ALL_LINGUAS because we need it to compute - # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it - # from automake < 1.5. - eval 'OBSOLETE_ALL_LINGUAS''=""' - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="%UNSET%" - - - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;; - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "lib/tre-config.h") CONFIG_HEADERS="$CONFIG_HEADERS lib/tre-config.h" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; - "doc/agrep.1") CONFIG_FILES="$CONFIG_FILES doc/agrep.1" ;; - "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; - "m4/Makefile") CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;; - "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; - "tests/agrep/Makefile") CONFIG_FILES="$CONFIG_FILES tests/agrep/Makefile" ;; - "tre.pc") CONFIG_FILES="$CONFIG_FILES tre.pc" ;; - "tre.spec") CONFIG_FILES="$CONFIG_FILES tre.spec" ;; - "utils/Makefile") CONFIG_FILES="$CONFIG_FILES utils/Makefile" ;; - - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= - trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -# -# Set up the sed scripts for CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "$CONFIG_FILES"; then - -cat >"$tmp/subs-1.sed" <<\CEOF -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@SHELL@,|#_!!_#|/bin/sh,g -s,@PATH_SEPARATOR@,|#_!!_#|:,g -s,@PACKAGE_NAME@,|#_!!_#|TRE,g -s,@PACKAGE_TARNAME@,|#_!!_#|tre,g -s,@PACKAGE_VERSION@,|#_!!_#|0.8.0,g -s,@PACKAGE_STRING@,|#_!!_#|TRE 0.8.0,g -s,@PACKAGE_BUGREPORT@,|#_!!_#|tre-general@|#_!!_#|lists.laurikari.net,g -s,@exec_prefix@,|#_!!_#|${prefix},g -s,@prefix@,|#_!!_#|/usr/local,g -s,@program_transform_name@,|#_!!_#|s\,x\,x\,,g -s,@bindir@,|#_!!_#|${exec_prefix}/bin,g -s,@sbindir@,|#_!!_#|${exec_prefix}/sbin,g -s,@libexecdir@,|#_!!_#|${exec_prefix}/libexec,g -s,@datarootdir@,|#_!!_#|${prefix}/share,g -s,@datadir@,|#_!!_#|${datarootdir},g -s,@sysconfdir@,|#_!!_#|${prefix}/etc,g -s,@sharedstatedir@,|#_!!_#|${prefix}/com,g -s,@localstatedir@,|#_!!_#|${prefix}/var,g -s,@includedir@,|#_!!_#|${prefix}/include,g -s,@oldincludedir@,|#_!!_#|/usr/include,g -s,@docdir@,|#_!!_#|${datarootdir}/doc/${PACKAGE_TARNAME},g -s,@infodir@,|#_!!_#|${datarootdir}/info,g -s,@htmldir@,|#_!!_#|${docdir},g -s,@dvidir@,|#_!!_#|${docdir},g -s,@pdfdir@,|#_!!_#|${docdir},g -s,@psdir@,|#_!!_#|${docdir},g -s,@libdir@,|#_!!_#|${exec_prefix}/lib,g -s,@localedir@,|#_!!_#|${datarootdir}/locale,g -s,@mandir@,|#_!!_#|${datarootdir}/man,g -s,@DEFS@,|#_!!_#|-DHAVE_CONFIG_H,g -s,@ECHO_C@,|#_!!_#|,g -s,@ECHO_N@,|#_!!_#|-n,g -s,@ECHO_T@,|#_!!_#|,g -s,@LIBS@,|#_!!_#|,g -s,@build_alias@,|#_!!_#|,g -s,@host_alias@,|#_!!_#|,g -s,@target_alias@,|#_!!_#|,g -s,@build@,|#_!!_#|x86_64-unknown-freebsd8.0,g -s,@build_cpu@,|#_!!_#|x86_64,g -s,@build_vendor@,|#_!!_#|unknown,g -s,@build_os@,|#_!!_#|freebsd8.0,g -s,@host@,|#_!!_#|x86_64-unknown-freebsd8.0,g -s,@host_cpu@,|#_!!_#|x86_64,g -s,@host_vendor@,|#_!!_#|unknown,g -s,@host_os@,|#_!!_#|freebsd8.0,g -s,@target@,|#_!!_#|x86_64-unknown-freebsd8.0,g -s,@target_cpu@,|#_!!_#|x86_64,g -s,@target_vendor@,|#_!!_#|unknown,g -s,@target_os@,|#_!!_#|freebsd8.0,g -s,@INSTALL_PROGRAM@,|#_!!_#|${INSTALL},g -s,@INSTALL_SCRIPT@,|#_!!_#|${INSTALL},g -s,@INSTALL_DATA@,|#_!!_#|${INSTALL} -m 644,g -s,@am__isrc@,|#_!!_#|,g -s,@CYGPATH_W@,|#_!!_#|echo,g -s,@PACKAGE@,|#_!!_#|tre,g -s,@VERSION@,|#_!!_#|0.8.0,g -s,@ACLOCAL@,|#_!!_#|${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run aclocal-1.10,g -s,@AUTOCONF@,|#_!!_#|${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoconf,g -s,@AUTOMAKE@,|#_!!_#|${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run automake-1.10,g -s,@AUTOHEADER@,|#_!!_#|${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoheader,g -s,@MAKEINFO@,|#_!!_#|${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run makeinfo,g -s,@install_sh@,|#_!!_#|$(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh,g -s,@STRIP@,|#_!!_#|strip,g -s,@INSTALL_STRIP_PROGRAM@,|#_!!_#|$(install_sh) -c -s,g -s,@mkdir_p@,|#_!!_#|$(top_builddir)/utils/install-sh -c -d,g -s,@AWK@,|#_!!_#|nawk,g -s,@SET_MAKE@,|#_!!_#|,g -s,@am__leading_dot@,|#_!!_#|.,g -s,@AMTAR@,|#_!!_#|${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run tar,g -s,@am__tar@,|#_!!_#|${AMTAR} chof - "$$tardir",g -s,@am__untar@,|#_!!_#|${AMTAR} xf -,g -s,@CC@,|#_!!_#|gcc,g -s,@CFLAGS@,|#_!!_#|-g -O2 -Wall,g -s,@LDFLAGS@,|#_!!_#|,g -s,@CPPFLAGS@,|#_!!_#|,g -s,@ac_ct_CC@,|#_!!_#|gcc,g -s,@EXEEXT@,|#_!!_#|,g -s,@OBJEXT@,|#_!!_#|o,g -s,@DEPDIR@,|#_!!_#|.deps,g -s,@am__include@,|#_!!_#|include,g -s,@am__quote@,|#_!!_#|,g -s,@AMDEP_TRUE@,|#_!!_#|,g -s,@AMDEP_FALSE@,|#_!!_#|#,g -s,@AMDEPBACKSLASH@,|#_!!_#|\\,g -s,@CCDEPMODE@,|#_!!_#|depmode=gcc3,g -s,@am__fastdepCC_TRUE@,|#_!!_#|,g -s,@am__fastdepCC_FALSE@,|#_!!_#|#,g -s,@CPP@,|#_!!_#|gcc -E,g -s,@TRE_VERSION@,|#_!!_#|0.8.0,g -s,@TRE_DEBUG_TRUE@,|#_!!_#|#,g -s,@TRE_DEBUG_FALSE@,|#_!!_#|,g -s,@TRE_PROFILE_TRUE@,|#_!!_#|#,g -s,@TRE_PROFILE_FALSE@,|#_!!_#|,g -s,@TRE_APPROX_TRUE@,|#_!!_#|,g -s,@TRE_APPROX_FALSE@,|#_!!_#|#,g -s,@TRE_AGREP_TRUE@,|#_!!_#|,g -s,@TRE_AGREP_FALSE@,|#_!!_#|#,g -CEOF -cat >"$tmp/subs-2.sed" <<\CEOF -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end -s,@GREP@,|#_!!_#|/usr/bin/grep,g -s,@EGREP@,|#_!!_#|/usr/bin/grep -E,g -s,@ALLOCA@,|#_!!_#|,g -s,@TRE_MULTIBYTE_TRUE@,|#_!!_#|,g -s,@TRE_MULTIBYTE_FALSE@,|#_!!_#|#,g -s,@USE_NLS@,|#_!!_#|no,g -s,@GETTEXT_MACRO_VERSION@,|#_!!_#|0.17,g -s,@MSGFMT@,|#_!!_#|/usr/local/bin/msgfmt,g -s,@GMSGFMT@,|#_!!_#|/usr/local/bin/msgfmt,g -s,@MSGFMT_015@,|#_!!_#|/usr/local/bin/msgfmt,g -s,@GMSGFMT_015@,|#_!!_#|/usr/local/bin/msgfmt,g -s,@XGETTEXT@,|#_!!_#|/usr/local/bin/xgettext,g -s,@XGETTEXT_015@,|#_!!_#|/usr/local/bin/xgettext,g -s,@MSGMERGE@,|#_!!_#|/usr/local/bin/msgmerge,g -s,@XGETTEXT_EXTRA_OPTIONS@,|#_!!_#|,g -s,@INTL_MACOSX_LIBS@,|#_!!_#|,g -s,@LIBICONV@,|#_!!_#|/usr/local/lib/libiconv.so -Wl\,-rpath -Wl\,/usr/local/lib,g -s,@LTLIBICONV@,|#_!!_#|-L/usr/local/lib -liconv -R/usr/local/lib,g -s,@INTLLIBS@,|#_!!_#|,g -s,@LIBINTL@,|#_!!_#|,g -s,@LTLIBINTL@,|#_!!_#|,g -s,@POSUB@,|#_!!_#|,g -s,@SED@,|#_!!_#|/usr/local/bin/gsed,g -s,@LN_S@,|#_!!_#|ln -s,g -s,@ECHO@,|#_!!_#|echo,g -s,@AR@,|#_!!_#|ar,g -s,@RANLIB@,|#_!!_#|ranlib,g -s,@DSYMUTIL@,|#_!!_#|,g -s,@NMEDIT@,|#_!!_#|,g -s,@DLLTOOL@,|#_!!_#|dlltool,g -s,@AS@,|#_!!_#|as,g -s,@OBJDUMP@,|#_!!_#|objdump,g -s,@LIBTOOL@,|#_!!_#|$(SHELL) $(top_builddir)/libtool,g -s,@LIBOBJS@,|#_!!_#|,g -s,@LTLIBOBJS@,|#_!!_#|,g -:end -s/|#_!!_#|//g -CEOF -fi # test -n "$CONFIG_FILES" - - -for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -echo "$as_me: error: Invalid tag $ac_tag." >&2;} - { (exit 1); exit 1; }; };; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -echo "$as_me: error: cannot find input file: $ac_f" >&2;} - { (exit 1); exit 1; }; };; - esac - ac_file_inputs="$ac_file_inputs $ac_f" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input="Generated from "`IFS=: - echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - fi - - case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin";; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= - -case `sed -n '/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p -' $ac_file_inputs` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} - ac_datarootdir_hack=' - s&@datadir@&${datarootdir}&g - s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g - s&@infodir@&${datarootdir}/info&g - s&@localedir@&${datarootdir}/locale&g - s&@mandir@&${datarootdir}/man&g - s&\${datarootdir}&${prefix}/share&g' ;; -esac - sed "/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ -s/:*$// -s/^[^=]*=[ ]*$// -} - -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s&@configure_input@&$configure_input&;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 -echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} - - rm -f "$tmp/stdin" - case $ac_file in - -) cat "$tmp/out"; rm -f "$tmp/out";; - *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; - esac - ;; - :H) - # - # CONFIG_HEADER - # - # First, check the format of the line: - cat >"$tmp/defines.sed" <<\CEOF -/^[ ]*#[ ]*undef[ ][ ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[ ]*$/b def -/^[ ]*#[ ]*define[ ][ ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[( ]/b def -b -:def -s/$/ / -s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_NAME\)[ (].*,\1define\2 "TRE" , -s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_TARNAME\)[ (].*,\1define\2 "tre" , -s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_VERSION\)[ (].*,\1define\2 "0.8.0" , -s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_STRING\)[ (].*,\1define\2 "TRE 0.8.0" , -s,^\([ #]*\)[^ ]*\([ ]*PACKAGE_BUGREPORT\)[ (].*,\1define\2 "tre-general@lists.laurikari.net" , -s,^\([ #]*\)[^ ]*\([ ]*PACKAGE\)[ (].*,\1define\2 "tre" , -s,^\([ #]*\)[^ ]*\([ ]*VERSION\)[ (].*,\1define\2 "0.8.0" , -s,^\([ #]*\)[^ ]*\([ ]*TRE_VERSION\)[ (].*,\1define\2 "0.8.0" , -s,^\([ #]*\)[^ ]*\([ ]*TRE_VERSION_1\)[ (].*,\1define\2 0 , -s,^\([ #]*\)[^ ]*\([ ]*TRE_VERSION_2\)[ (].*,\1define\2 8 , -s,^\([ #]*\)[^ ]*\([ ]*TRE_VERSION_3\)[ (].*,\1define\2 0 , -s,^\([ #]*\)[^ ]*\([ ]*NDEBUG\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*TRE_APPROX\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*_GNU_SOURCE\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*STDC_HEADERS\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_SYS_TYPES_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_SYS_STAT_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STDLIB_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STRING_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_MEMORY_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STRINGS_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_INTTYPES_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_STDINT_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_UNISTD_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_ALLOCA\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*TRE_USE_ALLOCA\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*TRE_REGEX_T_FIELD\)[ (].*,\1define\2 value , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_ISASCII\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_ISBLANK\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_GETOPT_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_GETOPT_LONG\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_WCHAR_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_WCTYPE_H\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_WCHAR_T\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_WINT_T\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_MBSTATE_T\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_WCSRTOMBS\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_ISWLOWER\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_ISWUPPER\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_TOWLOWER\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_TOWUPPER\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_WCSCHR\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_WCSCPY\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_WCSLEN\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_WCSNCPY\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*TRE_WCHAR\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_WCTYPE\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_ISWCTYPE\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_ISWASCII\)[ (].*,\1define\2 1 , -CEOF - sed -f "$tmp/defines.sed" $ac_file_inputs >"$tmp/out1" - # First, check the format of the line: - cat >"$tmp/defines.sed" <<\CEOF -/^[ ]*#[ ]*undef[ ][ ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[ ]*$/b def -/^[ ]*#[ ]*define[ ][ ]*[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*[( ]/b def -b -:def -s,^\([ #]*\)[^ ]*\([ ]*HAVE_ISWBLANK\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_MBRTOWC\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*TRE_MULTIBYTE\)[ (].*,\1define\2 1 , -s,^\([ #]*\)[^ ]*\([ ]*HAVE_DLFCN_H\)[ (].*,\1define\2 1 , -s/ $// -s,^[ #]*u.*,/* & */, -CEOF - sed -f "$tmp/defines.sed" "$tmp/out1" >"$tmp/out2" -ac_result="$tmp/out2" - if test x"$ac_file" != x-; then - echo "/* $configure_input */" >"$tmp/config.h" - cat "$ac_result" >>"$tmp/config.h" - if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then - { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f $ac_file - mv "$tmp/config.h" $ac_file - fi - else - echo "/* $configure_input */" - cat "$ac_result" - fi - rm -f "$tmp/out12" -# Compute $ac_file's index in $config_headers. -_am_arg=$ac_file -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 -echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir=$dirpart/$fdir - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done - ;; - "po-directories":C) - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - # Treat a directory as a PO directory if and only if it has a - # POTFILES.in file. This allows packages to have multiple PO - # directories under different names or in different locations. - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - POMAKEFILEDEPS="POTFILES.in" - # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` - # Hide the ALL_LINGUAS assigment from automake < 1.5. - eval 'ALL_LINGUAS''=$ALL_LINGUAS_' - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # The set of available languages was given in configure.in. - # Hide the ALL_LINGUAS assigment from automake < 1.5. - eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' - fi - # Compute POFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) - # Compute UPDATEPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) - # Compute DUMMYPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) - # Compute GMOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - UPDATEPOFILES= - DUMMYPOFILES= - GMOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done ;; - - esac -done # for ac_tag - - -{ (exit 0); exit 0; } diff --git a/configure b/configure deleted file mode 100755 index 3b2c1ecb793ea..0000000000000 --- a/configure +++ /dev/null @@ -1,17759 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.61 for TRE 0.8.0. -# -# Report bugs to . -# -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -as_nl=' -' -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } -fi - -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# CDPATH. -$as_unset CDPATH - - -if test "x$CONFIG_SHELL" = x; then - if (eval ":") 2>/dev/null; then - as_have_required=yes -else - as_have_required=no -fi - - if test $as_have_required = yes && (eval ": -(as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : -else - exitcode=1 - echo positional parameters were not saved. -fi - -test \$exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=\$LINENO - as_lineno_2=\$LINENO - test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && - test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -") 2> /dev/null; then - : -else - as_candidate_shells= - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - case $as_dir in - /*) - for as_base in sh bash ksh sh5; do - as_candidate_shells="$as_candidate_shells $as_dir/$as_base" - done;; - esac -done -IFS=$as_save_IFS - - - for as_shell in $as_candidate_shells $SHELL; do - # Try only shells that exist, to save several forks. - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { ("$as_shell") 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - -: -_ASEOF -}; then - CONFIG_SHELL=$as_shell - as_have_required=yes - if { "$as_shell" 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - -: -(as_func_return () { - (exit $1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = "$1" ); then - : -else - exitcode=1 - echo positional parameters were not saved. -fi - -test $exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } - -_ASEOF -}; then - break -fi - -fi - - done - - if test "x$CONFIG_SHELL" != x; then - for as_var in BASH_ENV ENV - do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - done - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -fi - - - if test $as_have_required = no; then - echo This script requires a shell more modern than all the - echo shells that I found on your system. Please install a - echo modern shell, or manually run the script under such a - echo shell if you do have one. - { (exit 1); exit 1; } -fi - - -fi - -fi - - - -(eval "as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : -else - exitcode=1 - echo positional parameters were not saved. -fi - -test \$exitcode = 0") || { - echo No shell found that supports shell functions. - echo Please tell autoconf@gnu.org about your system, - echo including any error possibly output before this - echo message -} - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in --n*) - case `echo 'x\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; - esac;; -*) - ECHO_N='-n';; -esac - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir -fi -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - - - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -echo=${ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat </dev/null 2>&1 && unset CDPATH - -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string=`eval $cmd`) 2>/dev/null && - echo_test_string=`eval $cmd` && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - - -exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Identity of this package. -PACKAGE_NAME='TRE' -PACKAGE_TARNAME='tre' -PACKAGE_VERSION='0.8.0' -PACKAGE_STRING='TRE 0.8.0' -PACKAGE_BUGREPORT='tre-general@lists.laurikari.net' - -ac_unique_file="lib/regcomp.c" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -gt_needs= -ac_subst_vars='SHELL -PATH_SEPARATOR -PACKAGE_NAME -PACKAGE_TARNAME -PACKAGE_VERSION -PACKAGE_STRING -PACKAGE_BUGREPORT -exec_prefix -prefix -program_transform_name -bindir -sbindir -libexecdir -datarootdir -datadir -sysconfdir -sharedstatedir -localstatedir -includedir -oldincludedir -docdir -infodir -htmldir -dvidir -pdfdir -psdir -libdir -localedir -mandir -DEFS -ECHO_C -ECHO_N -ECHO_T -LIBS -build_alias -host_alias -target_alias -build -build_cpu -build_vendor -build_os -host -host_cpu -host_vendor -host_os -target -target_cpu -target_vendor -target_os -INSTALL_PROGRAM -INSTALL_SCRIPT -INSTALL_DATA -am__isrc -CYGPATH_W -PACKAGE -VERSION -ACLOCAL -AUTOCONF -AUTOMAKE -AUTOHEADER -MAKEINFO -install_sh -STRIP -INSTALL_STRIP_PROGRAM -mkdir_p -AWK -SET_MAKE -am__leading_dot -AMTAR -am__tar -am__untar -CC -CFLAGS -LDFLAGS -CPPFLAGS -ac_ct_CC -EXEEXT -OBJEXT -DEPDIR -am__include -am__quote -AMDEP_TRUE -AMDEP_FALSE -AMDEPBACKSLASH -CCDEPMODE -am__fastdepCC_TRUE -am__fastdepCC_FALSE -CPP -TRE_VERSION -TRE_DEBUG_TRUE -TRE_DEBUG_FALSE -TRE_PROFILE_TRUE -TRE_PROFILE_FALSE -TRE_APPROX_TRUE -TRE_APPROX_FALSE -TRE_AGREP_TRUE -TRE_AGREP_FALSE -GREP -EGREP -ALLOCA -TRE_MULTIBYTE_TRUE -TRE_MULTIBYTE_FALSE -USE_NLS -GETTEXT_MACRO_VERSION -MSGFMT -GMSGFMT -MSGFMT_015 -GMSGFMT_015 -XGETTEXT -XGETTEXT_015 -MSGMERGE -XGETTEXT_EXTRA_OPTIONS -INTL_MACOSX_LIBS -LIBICONV -LTLIBICONV -INTLLIBS -LIBINTL -LTLIBINTL -POSUB -SED -LN_S -ECHO -AR -RANLIB -DSYMUTIL -NMEDIT -DLLTOOL -AS -OBJDUMP -LIBTOOL -LIBOBJS -LTLIBOBJS' -ac_subst_files='' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` - eval enable_$ac_feature=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` - eval enable_$ac_feature=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/[-.]/_/g'` - eval with_$ac_package=\$ac_optarg ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/[-.]/_/g'` - eval with_$ac_package=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } -fi - -# Be sure to have absolute directory names. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; } -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - { echo "$as_me: error: Working directory cannot be determined" >&2 - { (exit 1); exit 1; }; } -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - { echo "$as_me: error: pwd does not report name of working directory" >&2 - { (exit 1); exit 1; }; } - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$0" || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 - { (exit 1); exit 1; }; } - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures TRE 0.8.0 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/tre] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] - --target=TARGET configure for building compilers for TARGET [HOST] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of TRE 0.8.0:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors - --enable-profile enable profiling with gprof [default=disabled] - --enable-debug enable development-time debugging [default=disabled] - --disable-warnings disable C compiler warning messages - [default=enabled] - --disable-approx disable the approximate matching functionality - [default=enabled] - --disable-agrep Do not build and install the agrep tool - [default=install] - --enable-system-abi try to make TRE compatible with the system regex ABI - [default=disabled] - --disable-wchar disable the wide character (wchar_t) support - [default=detect] - --disable-multibyte disable multibyte character set support - [default=detect] - --disable-largefile omit support for large files - --disable-nls do not use Native Language Support - --disable-rpath do not hardcode runtime library paths - --enable-static[=PKGS] build static libraries [default=no] - --enable-shared[=PKGS] build shared libraries [default=yes] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --without-alloca don't use alloca [default=use] - --with-libutf8[=DIR] search for libutf8 from DIR/include and DIR/lib - --without-libutf8 do not use libutf8 [default=use if needed] - --with-gnu-ld assume the C compiler uses GNU ld default=no - --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib - --without-libiconv-prefix don't search for libiconv in includedir and libdir - --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib - --without-libintl-prefix don't search for libintl in includedir and libdir - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-pic try to use only PIC/non-PIC objects [default=use - both] - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -TRE configure 0.8.0 -generated by GNU Autoconf 2.61 - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by TRE $as_me 0.8.0, which was -generated by GNU Autoconf 2.61. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args '$ac_arg'" - ;; - esac - done -done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - *) $as_unset $ac_var ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------------- ## -## File substitutions. ## -## ------------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -n "$CONFIG_SITE"; then - set x "$CONFIG_SITE" -elif test "x$prefix" != xNONE; then - set x "$prefix/share/config.site" "$prefix/etc/config.site" -else - set x "$ac_default_prefix/share/config.site" \ - "$ac_default_prefix/etc/config.site" -fi -shift -for ac_site_file -do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -gt_needs="$gt_needs " -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - - - - - - - - - - - - - - - - - - - - - - - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -ac_aux_dir= -for ac_dir in utils "$srcdir"/utils; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in utils \"$srcdir\"/utils" >&5 -echo "$as_me: error: cannot find install-sh or install.sh in utils \"$srcdir\"/utils" >&2;} - { (exit 1); exit 1; }; } -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} - { (exit 1); exit 1; }; } - -{ echo "$as_me:$LINENO: checking build system type" >&5 -echo $ECHO_N "checking build system type... $ECHO_C" >&6; } -if test "${ac_cv_build+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -echo "${ECHO_T}$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -echo "$as_me: error: invalid value of canonical build" >&2;} - { (exit 1); exit 1; }; };; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ echo "$as_me:$LINENO: checking host system type" >&5 -echo $ECHO_N "checking host system type... $ECHO_C" >&6; } -if test "${ac_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} - { (exit 1); exit 1; }; } -fi - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -echo "${ECHO_T}$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -echo "$as_me: error: invalid value of canonical host" >&2;} - { (exit 1); exit 1; }; };; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -{ echo "$as_me:$LINENO: checking target system type" >&5 -echo $ECHO_N "checking target system type... $ECHO_C" >&6; } -if test "${ac_cv_target+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "x$target_alias" = x; then - ac_cv_target=$ac_cv_host -else - ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || - { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 -echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} - { (exit 1); exit 1; }; } -fi - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 -echo "${ECHO_T}$ac_cv_target" >&6; } -case $ac_cv_target in -*-*-*) ;; -*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 -echo "$as_me: error: invalid value of canonical target" >&2;} - { (exit 1); exit 1; }; };; -esac -target=$ac_cv_target -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_target -shift -target_cpu=$1 -target_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -target_os=$* -IFS=$ac_save_IFS -case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac - - -# The aliases save the names the user supplied, while $host etc. -# will get canonicalized. -test -n "$target_alias" && - test "$program_prefix$program_suffix$program_transform_name" = \ - NONENONEs,x,x, && - program_prefix=${target_alias}- -am__api_version='1.10' - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - done - done - ;; -esac -done -IFS=$as_save_IFS - - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&5 -echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&2;} - { (exit 1); exit 1; }; } - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -Check your system clock" >&5 -echo "$as_me: error: newly created file is older than distributed files! -Check your system clock" >&2;} - { (exit 1); exit 1; }; } -fi -{ echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. echo might interpret backslashes. -# By default was `s,x,x', remove it if useless. -cat <<\_ACEOF >conftest.sed -s/[\\$]/&&/g;s/;s,x,x,$// -_ACEOF -program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -rm -f conftest.sed - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 -echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 -echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; } -if test -z "$MKDIR_P"; then - if test "${ac_cv_path_mkdir+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done -done -IFS=$as_save_IFS - -fi - - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - test -d ./--version && rmdir ./--version - MKDIR_P="$ac_install_sh -d" - fi -fi -{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5 -echo "${ECHO_T}$MKDIR_P" >&6; } - -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_AWK+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { echo "$as_me:$LINENO: result: $AWK" >&5 -echo "${ECHO_T}$AWK" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } -set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - SET_MAKE= -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='tre' - VERSION='0.8.0' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' - - - - - - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO: checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -# -# List of possible output files, starting from the most likely. -# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) -# only as a last resort. b.out is created by i960 compilers. -ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' -# -# The IRIX 6 linker writes into existing files which may not be -# executable, retaining their permissions. Remove them first so a -# subsequent execution test works. -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { (ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi - -{ echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6; } -if test -z "$ac_file"; then - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } -fi - -ac_exeext=$ac_cv_exeext - -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -{ echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - -rm -f a.out a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } -{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6; } - -{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_compiler_gnu=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - CFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 -echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cc_c89=$ac_arg -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6; } ;; - xno) - { echo "$as_me:$LINENO: result: unsupported" >&5 -echo "${ECHO_T}unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; -esac - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo done -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi - - -{ echo "$as_me:$LINENO: result: $_am_result" >&5 -echo "${ECHO_T}$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - done - done - ;; -esac -done -IFS=$as_save_IFS - - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -if test "x$CC" != xcc; then - { echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 -echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6; } -else - { echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 -echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6; } -fi -set dummy $CC; ac_cc=`echo $2 | - sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` -if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -# Make sure it works both with $CC and with simple cc. -# We do the test twice because some compilers refuse to overwrite an -# existing .o file with -o, though they will create one. -ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' -rm -f conftest2.* -if { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - test -f conftest2.$ac_objext && { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; -then - eval ac_cv_prog_cc_${ac_cc}_c_o=yes - if test "x$CC" != xcc; then - # Test first that cc exists at all. - if { ac_try='cc -c conftest.$ac_ext >&5' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' - rm -f conftest2.* - if { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - test -f conftest2.$ac_objext && { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; - then - # cc works too. - : - else - # cc exists but doesn't like -o. - eval ac_cv_prog_cc_${ac_cc}_c_o=no - fi - fi - fi -else - eval ac_cv_prog_cc_${ac_cc}_c_o=no -fi -rm -f core conftest* - -fi -if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } - -cat >>confdefs.h <<\_ACEOF -#define NO_MINUS_C_MINUS_O 1 -_ACEOF - -fi - -# FIXME: we rely on the cache variable name because -# there is no other way. -set dummy $CC -ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` -if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi - - - -tre_version_1=`echo $PACKAGE_VERSION | cut -d . -f 1` -tre_version_2=`echo $PACKAGE_VERSION | cut -d . -f 2` -tre_version_3=`echo $PACKAGE_VERSION | cut -d . -f 3` -tre_version=$tre_version_1.$tre_version_2.$tre_version_3 - -cat >>confdefs.h <<_ACEOF -#define TRE_VERSION "$tre_version" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define TRE_VERSION_1 $tre_version_1 -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define TRE_VERSION_2 $tre_version_2 -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define TRE_VERSION_3 $tre_version_3 -_ACEOF - -TRE_VERSION=$tre_version - - -# Check whether --enable-profile was given. -if test "${enable_profile+set}" = set; then - enableval=$enable_profile; tre_profile="$enableval" -else - tre_profile="no" -fi - - -# Check whether --enable-debug was given. -if test "${enable_debug+set}" = set; then - enableval=$enable_debug; tre_debug="$enableval" -else - tre_debug="no" -fi - -if test "$tre_debug" = "yes"; then - if true; then - TRE_DEBUG_TRUE= - TRE_DEBUG_FALSE='#' -else - TRE_DEBUG_TRUE='#' - TRE_DEBUG_FALSE= -fi - - -cat >>confdefs.h <<\_ACEOF -#define TRE_DEBUG 1 -_ACEOF - -else - if false; then - TRE_DEBUG_TRUE= - TRE_DEBUG_FALSE='#' -else - TRE_DEBUG_TRUE='#' - TRE_DEBUG_FALSE= -fi - - -cat >>confdefs.h <<\_ACEOF -#define NDEBUG 1 -_ACEOF - -fi - -if test "$tre_profile" = "yes"; then - CFLAGS="$CFLAGS -pg" - if true; then - TRE_PROFILE_TRUE= - TRE_PROFILE_FALSE='#' -else - TRE_PROFILE_TRUE='#' - TRE_PROFILE_FALSE= -fi - -else - if false; then - TRE_PROFILE_TRUE= - TRE_PROFILE_FALSE='#' -else - TRE_PROFILE_TRUE='#' - TRE_PROFILE_FALSE= -fi - -fi - -# Check whether --enable-warnings was given. -if test "${enable_warnings+set}" = set; then - enableval=$enable_warnings; tre_cc_warnings="$enableval" -else - tre_cc_warnings="yes" -fi - -if test "$tre_cc_warnings" = "yes"; then - - # Don't override if CFLAGS was already set. - if test -z "$ac_env_CFLAGS_set"; then - ansi= - if test -z "$ansi"; then - msg="for C compiler warning flags" - else - msg="for C compiler warning and ANSI conformance flags" - fi - { echo "$as_me:$LINENO: checking $msg" >&5 -echo $ECHO_N "checking $msg... $ECHO_C" >&6; } -if test "${vl_cv_prog_cc_warnings+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - if test -n "$CC"; then - cat > conftest.c <&1 | grep -i "WorkShop" > /dev/null 2>&1 && - $CC -c -v -Xc conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="-v" - else - vl_cv_prog_cc_warnings="-v -Xc" - fi - - elif ($CC -V 2>&1 | grep -i "Digital UNIX Compiler" > /dev/null 2>&1 || - $CC -V 2>&1 | grep -i "Compaq C" > /dev/null 2>&1) && - $CC -c -verbose -w0 -warnprotos -std1 conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="-verbose -w0 -warnprotos" - else - vl_cv_prog_cc_warnings="-verbose -w0 -warnprotos -std1" - fi - - elif $CC 2>&1 | grep -i "C for AIX Compiler" > /dev/null 2>&1 && - $CC -c -qlanglvl=ansi -qinfo=all conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="-qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd:nouni:nocnv" - else - vl_cv_prog_cc_warnings="-qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd:nouni:nocnv -qlanglvl=ansi" - fi - - elif $CC -version 2>&1 | grep -i "MIPSpro Compilers" > /dev/null 2>&1 && - $CC -c -fullwarn -ansi -ansiE conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="-fullwarn" - else - vl_cv_prog_cc_warnings="-fullwarn -ansi -ansiE" - fi - - elif what $CC 2>&1 | grep -i "HP C Compiler" > /dev/null 2>&1 && - $CC -c -Aa +w1 conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="+w1" - else - vl_cv_prog_cc_warnings="+w1 -Aa" - fi - - elif $CC -V 2>&1 | grep "/SX" > /dev/null 2>&1 && - $CC -c -pvctl,fullmsg -Xc conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="-pvctl,fullmsg" - else - vl_cv_prog_cc_warnings="-pvctl,fullmsg -Xc" - fi - - elif $CC -V 2>&1 | grep -i "Cray" > /dev/null 2>&1 && - $CC -c -h msglevel 2 conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="-h msglevel 2" - else - vl_cv_prog_cc_warnings="-h msglevel 2 -h conform" - fi - - fi - rm -f conftest.* - fi - if test -n "$vl_cv_prog_cc_warnings"; then - CFLAGS="$CFLAGS $vl_cv_prog_cc_warnings" - else - vl_cv_prog_cc_warnings="unknown" - fi - -fi -{ echo "$as_me:$LINENO: result: $vl_cv_prog_cc_warnings" >&5 -echo "${ECHO_T}$vl_cv_prog_cc_warnings" >&6; } - fi - -fi - -# Check whether --enable-approx was given. -if test "${enable_approx+set}" = set; then - enableval=$enable_approx; tre_approx="$enableval" -else - tre_approx="yes" -fi - -if test "$tre_approx" = "yes"; then - -cat >>confdefs.h <<\_ACEOF -#define TRE_APPROX 1 -_ACEOF - - if true; then - TRE_APPROX_TRUE= - TRE_APPROX_FALSE='#' -else - TRE_APPROX_TRUE='#' - TRE_APPROX_FALSE= -fi - -else - if false; then - TRE_APPROX_TRUE= - TRE_APPROX_FALSE='#' -else - TRE_APPROX_TRUE='#' - TRE_APPROX_FALSE= -fi - -fi - -if test "$tre_approx" = "yes"; then - # Check whether --enable-agrep was given. -if test "${enable_agrep+set}" = set; then - enableval=$enable_agrep; tre_agrep="$enableval" -else - tre_agrep="yes" -fi - -else - tre_agrep="no (requires approximate matching)" -fi - -if test "$tre_agrep" = "yes"; then - if true; then - TRE_AGREP_TRUE= - TRE_AGREP_FALSE='#' -else - TRE_AGREP_TRUE='#' - TRE_AGREP_FALSE= -fi - -else - if false; then - TRE_AGREP_TRUE= - TRE_AGREP_FALSE='#' -else - TRE_AGREP_TRUE='#' - TRE_AGREP_FALSE= -fi - -fi - - - -{ echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 -echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6; } -if test "${ac_cv_c_const+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -/* FIXME: Include the comments suggested by Paul. */ -#ifndef __cplusplus - /* Ultrix mips cc rejects this. */ - typedef int charset[2]; - const charset cs; - /* SunOS 4.1.1 cc rejects this. */ - char const *const *pcpcc; - char **ppc; - /* NEC SVR4.0.2 mips cc rejects this. */ - struct point {int x, y;}; - static struct point const zero = {0,0}; - /* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in - an arm of an if-expression whose if-part is not a constant - expression */ - const char *g = "string"; - pcpcc = &g + (g ? g-g : 0); - /* HPUX 7.0 cc rejects these. */ - ++pcpcc; - ppc = (char**) pcpcc; - pcpcc = (char const *const *) ppc; - { /* SCO 3.2v4 cc rejects this. */ - char *t; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; - if (s) return 0; - } - { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; - } - { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; - } - { /* AIX XL C 1.02.0.0 rejects this saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; }; - struct s *b; b->j = 5; - } - { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; - if (!foo) return 0; - } - return !cs[0] && !zero.x; -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_c_const=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_c_const=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 -echo "${ECHO_T}$ac_cv_c_const" >&6; } -if test $ac_cv_c_const = no; then - -cat >>confdefs.h <<\_ACEOF -#define const -_ACEOF - -fi - -{ echo "$as_me:$LINENO: checking for inline" >&5 -echo $ECHO_N "checking for inline... $ECHO_C" >&6; } -if test "${ac_cv_c_inline+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_c_inline=no -for ac_kw in inline __inline__ __inline; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifndef __cplusplus -typedef int foo_t; -static $ac_kw foo_t static_foo () {return 0; } -$ac_kw foo_t foo () {return 0; } -#endif - -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_c_inline=$ac_kw -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_inline" != no && break -done - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 -echo "${ECHO_T}$ac_cv_c_inline" >&6; } - - -case $ac_cv_c_inline in - inline | yes) ;; - *) - case $ac_cv_c_inline in - no) ac_val=;; - *) ac_val=$ac_cv_c_inline;; - esac - cat >>confdefs.h <<_ACEOF -#ifndef __cplusplus -#define inline $ac_val -#endif -_ACEOF - ;; -esac - - - -cat >>confdefs.h <<\_ACEOF -#define _GNU_SOURCE 1 -_ACEOF - - -{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 -echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } -if test "${ac_cv_path_GREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Extract the first word of "grep ggrep" to use in msg output -if test -z "$GREP"; then -set dummy grep ggrep; ac_prog_name=$2 -if test "${ac_cv_path_GREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_path_GREP_found=false -# Loop through the user's path and test for each of PROGNAME-LIST -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue - # Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - - $ac_path_GREP_found && break 3 - done -done - -done -IFS=$as_save_IFS - - -fi - -GREP="$ac_cv_path_GREP" -if test -z "$GREP"; then - { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } -fi - -else - ac_cv_path_GREP=$GREP -fi - - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 -echo "${ECHO_T}$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } -if test "${ac_cv_path_EGREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - # Extract the first word of "egrep" to use in msg output -if test -z "$EGREP"; then -set dummy egrep; ac_prog_name=$2 -if test "${ac_cv_path_EGREP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_path_EGREP_found=false -# Loop through the user's path and test for each of PROGNAME-LIST -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue - # Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - - $ac_path_EGREP_found && break 3 - done -done - -done -IFS=$as_save_IFS - - -fi - -EGREP="$ac_cv_path_EGREP" -if test -z "$EGREP"; then - { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } -fi - -else - ac_cv_path_EGREP=$EGREP -fi - - - fi -fi -{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 -echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_header_stdc=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - -fi -fi -{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - - - -# Check whether --with-alloca was given. -if test "${with_alloca+set}" = set; then - withval=$with_alloca; tre_use_alloca="$withval" -else - tre_use_alloca="yes" -fi - -if test "$tre_use_alloca" = "yes"; then - ALLOCA="" - # On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works -# for constant arguments. Useless! -{ echo "$as_me:$LINENO: checking for working alloca.h" >&5 -echo $ECHO_N "checking for working alloca.h... $ECHO_C" >&6; } -if test "${ac_cv_working_alloca_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -char *p = (char *) alloca (2 * sizeof (int)); - if (p) return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_working_alloca_h=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_working_alloca_h=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5 -echo "${ECHO_T}$ac_cv_working_alloca_h" >&6; } -if test $ac_cv_working_alloca_h = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_ALLOCA_H 1 -_ACEOF - -fi - -{ echo "$as_me:$LINENO: checking for alloca" >&5 -echo $ECHO_N "checking for alloca... $ECHO_C" >&6; } -if test "${ac_cv_func_alloca_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __GNUC__ -# define alloca __builtin_alloca -#else -# ifdef _MSC_VER -# include -# define alloca _alloca -# else -# ifdef HAVE_ALLOCA_H -# include -# else -# ifdef _AIX - #pragma alloca -# else -# ifndef alloca /* predefined by HP cc +Olibcalls */ -char *alloca (); -# endif -# endif -# endif -# endif -#endif - -int -main () -{ -char *p = (char *) alloca (1); - if (p) return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_func_alloca_works=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_alloca_works=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5 -echo "${ECHO_T}$ac_cv_func_alloca_works" >&6; } - -if test $ac_cv_func_alloca_works = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_ALLOCA 1 -_ACEOF - -else - # The SVR3 libPW and SVR4 libucb both contain incompatible functions -# that cause trouble. Some versions do not even contain alloca or -# contain a buggy version. If you still want to use their alloca, -# use ar to extract alloca.o from them instead of compiling alloca.c. - -ALLOCA=\${LIBOBJDIR}alloca.$ac_objext - -cat >>confdefs.h <<\_ACEOF -#define C_ALLOCA 1 -_ACEOF - - -{ echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5 -echo $ECHO_N "checking whether \`alloca.c' needs Cray hooks... $ECHO_C" >&6; } -if test "${ac_cv_os_cray+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#if defined CRAY && ! defined CRAY2 -webecray -#else -wenotbecray -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "webecray" >/dev/null 2>&1; then - ac_cv_os_cray=yes -else - ac_cv_os_cray=no -fi -rm -f conftest* - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5 -echo "${ECHO_T}$ac_cv_os_cray" >&6; } -if test $ac_cv_os_cray = yes; then - for ac_func in _getb67 GETB67 getb67; do - as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval echo '${'$as_ac_var'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -if test `eval echo '${'$as_ac_var'}'` = yes; then - -cat >>confdefs.h <<_ACEOF -#define CRAY_STACKSEG_END $ac_func -_ACEOF - - break -fi - - done -fi - -{ echo "$as_me:$LINENO: checking stack direction for C alloca" >&5 -echo $ECHO_N "checking stack direction for C alloca... $ECHO_C" >&6; } -if test "${ac_cv_c_stack_direction+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then - ac_cv_c_stack_direction=0 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -find_stack_direction () -{ - static char *addr = 0; - auto char dummy; - if (addr == 0) - { - addr = &dummy; - return find_stack_direction (); - } - else - return (&dummy > addr) ? 1 : -1; -} - -int -main () -{ - return find_stack_direction () < 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_c_stack_direction=1 -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_c_stack_direction=-1 -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - -fi -{ echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5 -echo "${ECHO_T}$ac_cv_c_stack_direction" >&6; } - -cat >>confdefs.h <<_ACEOF -#define STACK_DIRECTION $ac_cv_c_stack_direction -_ACEOF - - -fi - - if test -z "$ALLOCA"; then - # alloca() works. - -cat >>confdefs.h <<\_ACEOF -#define TRE_USE_ALLOCA 1 -_ACEOF - - fi -fi - -# Check whether --enable-system-abi was given. -if test "${enable_system_abi+set}" = set; then - enableval=$enable_system_abi; tre_system_abi="$enableval" -else - tre_system_abi="no" -fi - - -# If we are building a version compatible with the system ABI, we need to -# find an absolute path to the system regex.h (so it can be included from -# TRE regex.h using `#include "/path/to/regex.h"'). Then we need to -# find a field in the system defined regex_t struct where a pointer to -# the compiled regex object can be stored. - -if test "$tre_system_abi" = "yes"; then - # Check that there is a system regex.h to begin with. We may need - # to include sys/types.h before regex.h, so check for that first. - -for ac_header in sys/types.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -else - # Is the header compilable? -{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6; } - -# Is the header present? -{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ---------------------------------------------- ## -## Report this to tre-general@lists.laurikari.net ## -## ---------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in regex.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#if HAVE_SYS_TYPES_H -#include -#endif - - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -else - tre_system_abi="no (regex.h not found)" -fi - -done - -fi - -if test "$tre_system_abi" = "yes"; then - # Find out where system regex.h is. This is done by running the C - # preprocessor and grepping its output, hopefully getting a full - # path to regex.h. - { echo "$as_me:$LINENO: checking path to system regex.h" >&5 -echo $ECHO_N "checking path to system regex.h... $ECHO_C" >&6; } - echo '#include ' > conftest.c - tre_system_regex_h=`$CPP conftest.c \ - | grep '^#[a-z]* [0-9]* "\(.*regex.h\)"' \ - | head -1 \ - | sed 's/^#[a-z]* [0-9]* \"\(.*\)\".*/\1/'` - rm -f conftest.c - if test -n "$tre_system_regex_h" && test -f "$tre_system_regex_h"; then - { echo "$as_me:$LINENO: result: $tre_system_regex_h" >&5 -echo "${ECHO_T}$tre_system_regex_h" >&6; } - else - { echo "$as_me:$LINENO: result: unknown" >&5 -echo "${ECHO_T}unknown" >&6; } - tre_system_abi="no (could determine path to systeg regex.h)" - fi -fi - -if test "$tre_system_abi" = "yes"; then - # Find a field in the system regex_t struct where we can store a pointer. - # This is done by trying several names that are known to work on different - # systems. - { echo "$as_me:$LINENO: checking for a usable field for a pointer in regex_t" >&5 -echo $ECHO_N "checking for a usable field for a pointer in regex_t... $ECHO_C" >&6; } - tre_regex_t_field="" - for field in buffer re_comp __re_comp __reg_expression \ - re_g "re_pad[0]"; do - if test -z "$tre_regex_t_field"; then - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include -#include - -int -main () -{ - - regex_t foo; - void *bar = foo.$field; - foo.$field = bar; - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - { echo "$as_me:$LINENO: result: $field" >&5 -echo "${ECHO_T}$field" >&6; } - tre_regex_t_field="$field" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi - done - if test -z "$tre_regex_t_field"; then - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } - tre_system_abi="no (unknown regex_t contents, report to \ -$PACKAGE_BUGREPORT)" - fi -fi - -if test "$tre_system_abi" = "yes"; then - # So far, so good. Now check if we can redefine the system regex - # functions. For example, the system headers may define the - # standard functions as static wrapper functions (like on IRIX) - # which prevents redefining them later. - - # IRIX has some macro magic which we need to turn off. - -cat >>confdefs.h <<\_ACEOF -#define _REGCOMP_INTERNAL 1 -_ACEOF - - { echo "$as_me:$LINENO: checking if POSIX regex functions can be redefined" >&5 -echo $ECHO_N "checking if POSIX regex functions can be redefined... $ECHO_C" >&6; } - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include -#include - -int -regcomp(regex_t *preg, const char *regex, int cflags) -{ - return 0; -} -void -regfree(regex_t *preg) -{ - return; -} -int -regexec(const regex_t *preg, const char *str, - size_t nmatch, regmatch_t pmatch[], int eflags) -{ - return 0; -} -size_t -regerror(int errcode, const regex_t *preg, char *errbuf, - size_t errbuf_size) -{ - return 0; -} - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - tre_system_abi="yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } - tre_system_abi="no (unable to redefine system functions)" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -if test "$tre_system_abi" = "yes"; then - # Great, everything seems to be OK for ABI compatibility. Just check - # some additional types that may or may not be defined, and set up - # variables to enable ABI compatibility in regex.h. - - { echo "$as_me:$LINENO: checking for reg_errcode_t" >&5 -echo $ECHO_N "checking for reg_errcode_t... $ECHO_C" >&6; } -if test "${ac_cv_type_reg_errcode_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#ifdef HAVE_SYS_TYPES_H -#include -#endif /* HAVE_SYS_TYPES_H */ -#ifdef HAVE_REGEX_H -#include -#endif /* HAVE_REGEX_H */ - - -typedef reg_errcode_t ac__type_new_; -int -main () -{ -if ((ac__type_new_ *) 0) - return 0; -if (sizeof (ac__type_new_)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_type_reg_errcode_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_type_reg_errcode_t=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_type_reg_errcode_t" >&5 -echo "${ECHO_T}$ac_cv_type_reg_errcode_t" >&6; } -if test $ac_cv_type_reg_errcode_t = yes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_REG_ERRCODE_T 1 -_ACEOF - - -fi - - - -cat >>confdefs.h <<\_ACEOF -#define TRE_USE_SYSTEM_REGEX_H 1 -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define TRE_SYSTEM_REGEX_H_PATH "$tre_system_regex_h" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define TRE_REGEX_T_FIELD $tre_regex_t_field -_ACEOF - -else - cat >>confdefs.h <<\_ACEOF -#define TRE_REGEX_T_FIELD value -_ACEOF - -fi - - - -for ac_func in isascii isblank -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval echo '${'$as_ac_var'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -if test `eval echo '${'$as_ac_var'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - - -for ac_header in getopt.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -else - # Is the header compilable? -{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6; } - -# Is the header present? -{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ---------------------------------------------- ## -## Report this to tre-general@lists.laurikari.net ## -## ---------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_func in getopt_long -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval echo '${'$as_ac_var'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -if test `eval echo '${'$as_ac_var'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -else - # FreeBSD has a "gnugetopt" library. - { echo "$as_me:$LINENO: checking for getopt_long in -lgnugetopt" >&5 -echo $ECHO_N "checking for getopt_long in -lgnugetopt... $ECHO_C" >&6; } -if test "${ac_cv_lib_gnugetopt_getopt_long+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lgnugetopt $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char getopt_long (); -int -main () -{ -return getopt_long (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_gnugetopt_getopt_long=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_gnugetopt_getopt_long=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_gnugetopt_getopt_long" >&5 -echo "${ECHO_T}$ac_cv_lib_gnugetopt_getopt_long" >&6; } -if test $ac_cv_lib_gnugetopt_getopt_long = yes; then - cat >>confdefs.h <<\_ACEOF -#define HAVE_GETOPT_LONG 1 -_ACEOF - -fi - -fi -done - - -# Check whether --enable-wchar was given. -if test "${enable_wchar+set}" = set; then - enableval=$enable_wchar; tre_enable_wchar="$enableval" -else - tre_enable_wchar="detect" -fi - - - -# Check whether --with-libutf8 was given. -if test "${with_libutf8+set}" = set; then - withval=$with_libutf8; if test "$with_val" = "no"; then - tre_libutf8="no" - else - tre_libutf8="yes" - tre_libutf8_dirs="$with_libutf8" - tre_libutf8_libs="-lutf8" - fi -else - tre_libutf8="detect" - tre_libutf8_dirs="none /usr /usr/local" - tre_libutf8_libs="none -lutf8" -fi - - - -if test "$tre_enable_wchar" != "no"; then - - old_libs="$LIBS" - old_ldflags="$LDFLAGS" - old_cppflags="$CPPFLAGS" - if test "$tre_libutf8" != "no"; then - { echo "$as_me:$LINENO: checking for libutf8" >&5 -echo $ECHO_N "checking for libutf8... $ECHO_C" >&6; } - found="no" - for try_dir in $tre_libutf8_dirs; do - if test "$try_dir" = "none"; then - LDFLAGS="$old_ldflags" - CPPFLAGS="$old_cppflags" - else - LDFLAGS="$old_ldflags -L$try_dir/lib" - CPPFLAGS="$old_cppflags -I$try_dir/include" - fi - for try_lib in $tre_libutf8_libs; do - if test "$try_lib" = "none"; then - LIBS="$old_libs" - else - LIBS="$try_lib $old_libs" - fi - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char mbrtowc (); -int -main () -{ -return mbrtowc (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - found="yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - if test "$found" = "yes"; then - break; - fi - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char utf8_mbrtowc (); -int -main () -{ -return utf8_mbrtowc (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - found="yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - if test "$found" = "yes"; then - break; - fi - done - if test "$found" = "yes"; then - break; - fi - done - - if test "$found" = "yes"; then - if test "$LIBS" = "$old_libs"; then - { echo "$as_me:$LINENO: result: not needed" >&5 -echo "${ECHO_T}not needed" >&6; } - tre_libutf8="no" - else - { echo "$as_me:$LINENO: result: using from $try_dir/{lib,include}" >&5 -echo "${ECHO_T}using from $try_dir/{lib,include}" >&6; } - tre_libutf8="yes" - fi - else - LIBS="$old_libs" - LDFLAGS="$old_ldflags" - CPPFLAGS="$old_cppflags" - if test "$tre_libutf8" = "detect"; then - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } - tre_libutf8="no" - else - # Fail if libutf8 was requested but was not found. - { { echo "$as_me:$LINENO: error: not found" >&5 -echo "$as_me: error: not found" >&2;} - { (exit 1); exit 1; }; } - fi - fi - fi - - if test "$tre_libutf8" = "yes"; then - tre_wchar="yes" - -for ac_header in libutf8.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -else - # Is the header compilable? -{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6; } - -# Is the header present? -{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ---------------------------------------------- ## -## Report this to tre-general@lists.laurikari.net ## -## ---------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - else - - -for ac_header in wchar.h wctype.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -else - # Is the header compilable? -{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6; } - -# Is the header present? -{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ---------------------------------------------- ## -## Report this to tre-general@lists.laurikari.net ## -## ---------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - fi - -else - tre_wchar_reason="disabled with --disable-wchar" - tre_wchar="no ($tre_wchar_reason)" -fi - - -tre_includes=" -#ifdef HAVE_WCHAR_H -#include -#endif /* HAVE_WCHAR_H */ -#ifdef HAVE_WCTYPE_H -#include -#endif /* HAVE_WCTYPE_H */ -#ifdef HAVE_LIBUTF8_H -#include -#endif /* HAVE_LIBUTF8_H */ -" - -if test "$tre_enable_wchar" != "no"; then - { echo "$as_me:$LINENO: checking for wchar_t" >&5 -echo $ECHO_N "checking for wchar_t... $ECHO_C" >&6; } -if test "${ac_cv_type_wchar_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - $tre_includes - -typedef wchar_t ac__type_new_; -int -main () -{ -if ((ac__type_new_ *) 0) - return 0; -if (sizeof (ac__type_new_)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_type_wchar_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_type_wchar_t=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_type_wchar_t" >&5 -echo "${ECHO_T}$ac_cv_type_wchar_t" >&6; } -if test $ac_cv_type_wchar_t = yes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_WCHAR_T 1 -_ACEOF - - tre_wchar="yes" - - { echo "$as_me:$LINENO: checking whether WCHAR_MAX is defined" >&5 -echo $ECHO_N "checking whether WCHAR_MAX is defined... $ECHO_C" >&6; } -if test "${ax_cv_decl_wchar_max+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#ifdef HAVE_WCHAR_H -#include -#endif - -int -main () -{ -WCHAR_MAX - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ax_cv_decl_wchar_max="yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ax_cv_decl_wchar_max="no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ax_cv_decl_wchar_max" >&5 -echo "${ECHO_T}$ax_cv_decl_wchar_max" >&6; } - if test $ax_cv_decl_wchar_max = "no"; then - - typename=`echo wchar_t | sed "s/[^a-zA-Z0-9_]/_/g"` - { echo "$as_me:$LINENO: checking whether wchar_t is signed" >&5 -echo $ECHO_N "checking whether wchar_t is signed... $ECHO_C" >&6; } -if { as_var=ax_cv_decl_${typename}_signed; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#ifdef HAVE_WCHAR_H -#include -#endif - -int -main () -{ - int foo [ 1 - 2 * !(((wchar_t) -1) < 0) ] - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "ax_cv_decl_${typename}_signed=\"yes\"" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "ax_cv_decl_${typename}_signed=\"no\"" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval echo '${'ax_cv_decl_${typename}_signed'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - symbolname=`echo wchar_t | sed "s/[^a-zA-Z0-9_]/_/g" | tr "[a-z]" "[A-Z]"` - if eval "test \"\${ax_cv_decl_${typename}_signed}\" = \"yes\""; then - true - wc_signed="yes" - -cat >>confdefs.h <<\_ACEOF -#define WCHAR_T_SIGNED 1 -_ACEOF - - elif eval "test \"\${ax_cv_decl_${typename}_signed}\" = \"no\""; then - true - wc_signed="no" - -cat >>confdefs.h <<\_ACEOF -#define WCHAR_T_UNSIGNED 1 -_ACEOF - - fi - - if test "$wc_signed" = "yes"; then - -cat >>confdefs.h <<\_ACEOF -#define WCHAR_MAX (1L << (sizeof(wchar_t) * 8 - 1) - 1) -_ACEOF - - elif test "$wc_signed" = "no"; then - cat >>confdefs.h <<\_ACEOF -#define WCHAR_MAX (1L << (sizeof(wchar_t) * 8) - 1) -_ACEOF - - fi - fi - -else - tre_wchar_reason="wchar_t type not found" - tre_wchar="no ($tre_wchar_reason)" -fi - - - if test "$tre_wchar" = "yes"; then - { echo "$as_me:$LINENO: checking for wint_t" >&5 -echo $ECHO_N "checking for wint_t... $ECHO_C" >&6; } -if test "${ac_cv_type_wint_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - $tre_includes - -typedef wint_t ac__type_new_; -int -main () -{ -if ((ac__type_new_ *) 0) - return 0; -if (sizeof (ac__type_new_)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_type_wint_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_type_wint_t=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_type_wint_t" >&5 -echo "${ECHO_T}$ac_cv_type_wint_t" >&6; } -if test $ac_cv_type_wint_t = yes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_WINT_T 1 -_ACEOF - - -else - tre_wchar_reason="wint_t type not found" - tre_wchar="no ($tre_wchar_reason)" -fi - - fi - - if test "$tre_wchar" = "yes"; then - { echo "$as_me:$LINENO: checking for mbstate_t" >&5 -echo $ECHO_N "checking for mbstate_t... $ECHO_C" >&6; } -if test "${ac_cv_type_mbstate_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - $tre_includes - -typedef mbstate_t ac__type_new_; -int -main () -{ -if ((ac__type_new_ *) 0) - return 0; -if (sizeof (ac__type_new_)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_type_mbstate_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_type_mbstate_t=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_type_mbstate_t" >&5 -echo "${ECHO_T}$ac_cv_type_mbstate_t" >&6; } -if test $ac_cv_type_mbstate_t = yes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_MBSTATE_T 1 -_ACEOF - - -fi - - fi - - if test "$tre_wchar" = "yes"; then - found="no" - - - - for ax_func in wcsrtombs wcstombs; do - ax_fname=`echo $ax_func | sed "s/[^a-zA-Z0-9_]/_/g"` - ax_symbolname=`echo $ax_func | sed "s/[^a-zA-Z0-9_]/_/g" | tr "[a-z]" "[A-Z]"` - { echo "$as_me:$LINENO: checking for $ax_func" >&5 -echo $ECHO_N "checking for $ax_func... $ECHO_C" >&6; } -if { as_var=ax_cv_func_${ax_fname}; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$tre_includes -void *foo = $ax_func; - -int -main () -{ - return foo != $ax_func; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - eval "ax_cv_func_${ax_fname}=\"yes\"" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "ax_cv_func_${ax_fname}=\"no\"" -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval echo '${'ax_cv_func_${ax_fname}'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - if eval "test \"\${ax_cv_func_${ax_fname}}\" = \"yes\""; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_${ax_symbolname} 1 -_ACEOF - - found="yes"; break - else - true - - fi - done - - if test "$found" = "no"; then - tre_wchar_reason="no wcsrtombs or wcstombs found" - tre_wchar="no ($tre_wchar_reason)" - fi - fi - - if test "$tre_wchar" = "yes"; then - - - - - - - - - - for ax_func in iswlower iswupper towlower towupper wcschr \ - wcscpy wcslen wcsncpy; do - ax_fname=`echo $ax_func | sed "s/[^a-zA-Z0-9_]/_/g"` - ax_symbolname=`echo $ax_func | sed "s/[^a-zA-Z0-9_]/_/g" | tr "[a-z]" "[A-Z]"` - { echo "$as_me:$LINENO: checking for $ax_func" >&5 -echo $ECHO_N "checking for $ax_func... $ECHO_C" >&6; } -if { as_var=ax_cv_func_${ax_fname}; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - $tre_includes -void *foo = $ax_func; - -int -main () -{ - return foo != $ax_func; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - eval "ax_cv_func_${ax_fname}=\"yes\"" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "ax_cv_func_${ax_fname}=\"no\"" -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval echo '${'ax_cv_func_${ax_fname}'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - if eval "test \"\${ax_cv_func_${ax_fname}}\" = \"yes\""; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_${ax_symbolname} 1 -_ACEOF - - tre_wchar="yes" - else - true - tre_wchar_reason="$ac_func not found" - tre_wchar="no ($tre_wchar_reason)" - break - fi - done - - fi -fi - -case $host in - *-mingw*) - if test "$tre_libutf8" != "yes"; then - tre_wchar_reason="Not supported on MinGW" - tre_wchar="no ($tre_wchar_reason)" - fi - ;; -esac - -# Fail if wide character support was specifically requested but is -# not supported on this system. -if test "$tre_enable_wchar" = "yes"; then - if test "$tre_wchar" != "yes"; then - { { echo "$as_me:$LINENO: error: Cannot enable wide character support: $tre_wchar_reason" >&5 -echo "$as_me: error: Cannot enable wide character support: $tre_wchar_reason" >&2;} - { (exit 1); exit 1; }; } - fi -fi - -if test "$tre_wchar" = "yes"; then - -cat >>confdefs.h <<\_ACEOF -#define TRE_WCHAR 1 -_ACEOF - - - - - - for ax_func in wctype iswctype; do - ax_fname=`echo $ax_func | sed "s/[^a-zA-Z0-9_]/_/g"` - ax_symbolname=`echo $ax_func | sed "s/[^a-zA-Z0-9_]/_/g" | tr "[a-z]" "[A-Z]"` - { echo "$as_me:$LINENO: checking for $ax_func" >&5 -echo $ECHO_N "checking for $ax_func... $ECHO_C" >&6; } -if { as_var=ax_cv_func_${ax_fname}; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$tre_includes -void *foo = $ax_func; - -int -main () -{ - return foo != $ax_func; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - eval "ax_cv_func_${ax_fname}=\"yes\"" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "ax_cv_func_${ax_fname}=\"no\"" -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval echo '${'ax_cv_func_${ax_fname}'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - if eval "test \"\${ax_cv_func_${ax_fname}}\" = \"yes\""; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_${ax_symbolname} 1 -_ACEOF - - - else - true - - fi - done - - - - - for ax_func in iswascii iswblank; do - ax_fname=`echo $ax_func | sed "s/[^a-zA-Z0-9_]/_/g"` - ax_symbolname=`echo $ax_func | sed "s/[^a-zA-Z0-9_]/_/g" | tr "[a-z]" "[A-Z]"` - { echo "$as_me:$LINENO: checking for $ax_func" >&5 -echo $ECHO_N "checking for $ax_func... $ECHO_C" >&6; } -if { as_var=ax_cv_func_${ax_fname}; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$tre_includes -void *foo = $ax_func; - -int -main () -{ - return foo != $ax_func; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - eval "ax_cv_func_${ax_fname}=\"yes\"" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "ax_cv_func_${ax_fname}=\"no\"" -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval echo '${'ax_cv_func_${ax_fname}'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - if eval "test \"\${ax_cv_func_${ax_fname}}\" = \"yes\""; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_${ax_symbolname} 1 -_ACEOF - - - else - true - - fi - done - -fi - -# Check whether --enable-multibyte was given. -if test "${enable_multibyte+set}" = set; then - enableval=$enable_multibyte; tre_enable_multibyte="$enableval" -else - tre_enable_multibyte="detect" -fi - - -if test "$tre_wchar" != "yes"; then - if test "$tre_enable_multibyte" = "yes"; then - { { echo "$as_me:$LINENO: error: Cannot enable multibyte character support because wide \ -character support is not enabled ($tre_wchar_reason)" >&5 -echo "$as_me: error: Cannot enable multibyte character support because wide \ -character support is not enabled ($tre_wchar_reason)" >&2;} - { (exit 1); exit 1; }; } - fi -fi - -if test "$tre_enable_multibyte" != "no"; then - if test "$tre_wchar" != "yes"; then - tre_multibyte="no (requires wide character support)" - else - found="no" - - - - for ax_func in mbrtowc mbtowc; do - ax_fname=`echo $ax_func | sed "s/[^a-zA-Z0-9_]/_/g"` - ax_symbolname=`echo $ax_func | sed "s/[^a-zA-Z0-9_]/_/g" | tr "[a-z]" "[A-Z]"` - { echo "$as_me:$LINENO: checking for $ax_func" >&5 -echo $ECHO_N "checking for $ax_func... $ECHO_C" >&6; } -if { as_var=ax_cv_func_${ax_fname}; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.$ac_ext <<_ACEOF - /* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$tre_includes -void *foo = $ax_func; - -int -main () -{ - return foo != $ax_func; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - eval "ax_cv_func_${ax_fname}=\"yes\"" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "ax_cv_func_${ax_fname}=\"no\"" -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval echo '${'ax_cv_func_${ax_fname}'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - if eval "test \"\${ax_cv_func_${ax_fname}}\" = \"yes\""; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_${ax_symbolname} 1 -_ACEOF - - found="yes"; break - else - true - - fi - done - - if test "$found" = "no"; then - tre_mbs_reason="no mbrtowc or mbtowc found" - tre_multibyte="no ($tre_mbs_reason)" - else - tre_multibyte="yes" - fi - fi -else - tre_multibyte="no (disabled with --disable-multibyte)" -fi - -# Fail if multibyte character set support was specifically requested but -# is not supported on this system. -if test "$tre_enable_multibyte" = "yes"; then - if test "$tre_multibyte" != "yes"; then - { { echo "$as_me:$LINENO: error: Cannot enable multibyte character set support: \ -$tre_mbs_reason" >&5 -echo "$as_me: error: Cannot enable multibyte character set support: \ -$tre_mbs_reason" >&2;} - { (exit 1); exit 1; }; } - fi -fi - -if test "$tre_multibyte" = "yes"; then - if true; then - TRE_MULTIBYTE_TRUE= - TRE_MULTIBYTE_FALSE='#' -else - TRE_MULTIBYTE_TRUE='#' - TRE_MULTIBYTE_FALSE= -fi - - -cat >>confdefs.h <<\_ACEOF -#define TRE_MULTIBYTE 1 -_ACEOF - -else - if false; then - TRE_MULTIBYTE_TRUE= - TRE_MULTIBYTE_FALSE='#' -else - TRE_MULTIBYTE_TRUE='#' - TRE_MULTIBYTE_FALSE= -fi - -fi - -# Check whether --enable-largefile was given. -if test "${enable_largefile+set}" = set; then - enableval=$enable_largefile; -fi - -if test "$enable_largefile" != no; then - - { echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5 -echo $ECHO_N "checking for special C compiler options needed for large files... $ECHO_C" >&6; } -if test "${ac_cv_sys_largefile_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_sys_largefile_CC=no - if test "$GCC" != yes; then - ac_save_CC=$CC - while :; do - # IRIX 6.2 and later do not support large files by default, - # so use the C compiler's -n32 option if that helps. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext - CC="$CC -n32" - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_sys_largefile_CC=' -n32'; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext - break - done - CC=$ac_save_CC - rm -f conftest.$ac_ext - fi -fi -{ echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5 -echo "${ECHO_T}$ac_cv_sys_largefile_CC" >&6; } - if test "$ac_cv_sys_largefile_CC" != no; then - CC=$CC$ac_cv_sys_largefile_CC - fi - - { echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5 -echo $ECHO_N "checking for _FILE_OFFSET_BITS value needed for large files... $ECHO_C" >&6; } -if test "${ac_cv_sys_file_offset_bits+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_sys_file_offset_bits=no; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#define _FILE_OFFSET_BITS 64 -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_sys_file_offset_bits=64; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_sys_file_offset_bits=unknown - break -done -fi -{ echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5 -echo "${ECHO_T}$ac_cv_sys_file_offset_bits" >&6; } -case $ac_cv_sys_file_offset_bits in #( - no | unknown) ;; - *) -cat >>confdefs.h <<_ACEOF -#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits -_ACEOF -;; -esac -rm -f conftest* - if test $ac_cv_sys_file_offset_bits = unknown; then - { echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5 -echo $ECHO_N "checking for _LARGE_FILES value needed for large files... $ECHO_C" >&6; } -if test "${ac_cv_sys_large_files+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - while :; do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_sys_large_files=no; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#define _LARGE_FILES 1 -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_sys_large_files=1; break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_sys_large_files=unknown - break -done -fi -{ echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5 -echo "${ECHO_T}$ac_cv_sys_large_files" >&6; } -case $ac_cv_sys_large_files in #( - no | unknown) ;; - *) -cat >>confdefs.h <<_ACEOF -#define _LARGE_FILES $ac_cv_sys_large_files -_ACEOF -;; -esac -rm -f conftest* - fi -fi - - - - { echo "$as_me:$LINENO: checking whether NLS is requested" >&5 -echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6; } - # Check whether --enable-nls was given. -if test "${enable_nls+set}" = set; then - enableval=$enable_nls; USE_NLS=$enableval -else - USE_NLS=yes -fi - - { echo "$as_me:$LINENO: result: $USE_NLS" >&5 -echo "${ECHO_T}$USE_NLS" >&6; } - - - - - GETTEXT_MACRO_VERSION=0.17 - - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_path_MSGFMT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case "$MSGFMT" in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" - test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" - ;; -esac -fi -MSGFMT="$ac_cv_path_MSGFMT" -if test "$MSGFMT" != ":"; then - { echo "$as_me:$LINENO: result: $MSGFMT" >&5 -echo "${ECHO_T}$MSGFMT" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - # Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_path_GMSGFMT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac -fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - { echo "$as_me:$LINENO: result: $GMSGFMT" >&5 -echo "${ECHO_T}$GMSGFMT" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - - case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; - *) MSGFMT_015=$MSGFMT ;; - esac - - case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; - *) GMSGFMT_015=$GMSGFMT ;; - esac - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_path_XGETTEXT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case "$XGETTEXT" in - [\\/]* | ?:[\\/]*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" - test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" - ;; -esac -fi -XGETTEXT="$ac_cv_path_XGETTEXT" -if test "$XGETTEXT" != ":"; then - { echo "$as_me:$LINENO: result: $XGETTEXT" >&5 -echo "${ECHO_T}$XGETTEXT" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - rm -f messages.po - - case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; - *) XGETTEXT_015=$XGETTEXT ;; - esac - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "msgmerge", so it can be a program name with args. -set dummy msgmerge; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_path_MSGMERGE+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case "$MSGMERGE" in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then - ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" - test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" - ;; -esac -fi -MSGMERGE="$ac_cv_path_MSGMERGE" -if test "$MSGMERGE" != ":"; then - { echo "$as_me:$LINENO: result: $MSGMERGE" >&5 -echo "${ECHO_T}$MSGMERGE" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - test -n "$localedir" || localedir='${datadir}/locale' - - - test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= - - - ac_config_commands="$ac_config_commands po-directories" - - - - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { echo "$as_me:$LINENO: checking for ld used by GCC" >&5 -echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } -else - { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } -fi -if test "${acl_cv_path_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break ;; - *) - test "$with_gnu_ld" != yes && break ;; - esac - fi - done - IFS="$ac_save_ifs" -else - acl_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$acl_cv_path_LD" -if test -n "$LD"; then - { echo "$as_me:$LINENO: result: $LD" >&5 -echo "${ECHO_T}$LD" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi -test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } -if test "${acl_cv_prog_gnu_ld+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # I'd rather use --version here, but apparently some GNU ld's only accept -v. -case `$LD -v 2>&1 &5 -echo "${ECHO_T}$acl_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$acl_cv_prog_gnu_ld - - - - - { echo "$as_me:$LINENO: checking for shared library run path origin" >&5 -echo $ECHO_N "checking for shared library run path origin... $ECHO_C" >&6; } -if test "${acl_cv_rpath+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - -fi -{ echo "$as_me:$LINENO: result: $acl_cv_rpath" >&5 -echo "${ECHO_T}$acl_cv_rpath" >&6; } - wl="$acl_cv_wl" - acl_libext="$acl_cv_libext" - acl_shlibext="$acl_cv_shlibext" - acl_libname_spec="$acl_cv_libname_spec" - acl_library_names_spec="$acl_cv_library_names_spec" - acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - acl_hardcode_direct="$acl_cv_hardcode_direct" - acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" - # Check whether --enable-rpath was given. -if test "${enable_rpath+set}" = set; then - enableval=$enable_rpath; : -else - enable_rpath=yes -fi - - - - acl_libdirstem=lib - searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` - if test -n "$searchpath"; then - acl_save_IFS="${IFS= }"; IFS=":" - for searchdir in $searchpath; do - if test -d "$searchdir"; then - case "$searchdir" in - */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; - *) searchdir=`cd "$searchdir" && pwd` - case "$searchdir" in - */lib64 ) acl_libdirstem=lib64 ;; - esac ;; - esac - fi - done - IFS="$acl_save_IFS" - fi - - - - - - - - - - use_additional=yes - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - -# Check whether --with-libiconv-prefix was given. -if test "${with_libiconv_prefix+set}" = set; then - withval=$with_libiconv_prefix; - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - fi - fi - -fi - - LIBICONV= - LTLIBICONV= - INCICONV= - LIBICONV_PREFIX= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='iconv ' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" - else - : - fi - else - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - if test "$acl_hardcode_direct" = yes; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - haveit= - for x in $LDFLAGS $LIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" - fi - fi - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - LIBICONV_PREFIX="$basedir" - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INCICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - if test -n "$found_la"; then - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIBICONV; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" - ;; - esac - done - fi - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" - else - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - for found_dir in $ltrpathdirs; do - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" - done - fi - - - - - - - - - - - - - - - - - - - - - - - - - - { echo "$as_me:$LINENO: checking for CFPreferencesCopyAppValue" >&5 -echo $ECHO_N "checking for CFPreferencesCopyAppValue... $ECHO_C" >&6; } -if test "${gt_cv_func_CFPreferencesCopyAppValue+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -CFPreferencesCopyAppValue(NULL, NULL) - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - gt_cv_func_CFPreferencesCopyAppValue=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - gt_cv_func_CFPreferencesCopyAppValue=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$gt_save_LIBS" -fi -{ echo "$as_me:$LINENO: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 -echo "${ECHO_T}$gt_cv_func_CFPreferencesCopyAppValue" >&6; } - if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_CFPREFERENCESCOPYAPPVALUE 1 -_ACEOF - - fi - { echo "$as_me:$LINENO: checking for CFLocaleCopyCurrent" >&5 -echo $ECHO_N "checking for CFLocaleCopyCurrent... $ECHO_C" >&6; } -if test "${gt_cv_func_CFLocaleCopyCurrent+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -CFLocaleCopyCurrent(); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - gt_cv_func_CFLocaleCopyCurrent=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - gt_cv_func_CFLocaleCopyCurrent=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$gt_save_LIBS" -fi -{ echo "$as_me:$LINENO: result: $gt_cv_func_CFLocaleCopyCurrent" >&5 -echo "${ECHO_T}$gt_cv_func_CFLocaleCopyCurrent" >&6; } - if test $gt_cv_func_CFLocaleCopyCurrent = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_CFLOCALECOPYCURRENT 1 -_ACEOF - - fi - INTL_MACOSX_LIBS= - if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then - INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" - fi - - - - - - - LIBINTL= - LTLIBINTL= - POSUB= - - case " $gt_needs " in - *" need-formatstring-macros "*) gt_api_version=3 ;; - *" need-ngettext "*) gt_api_version=2 ;; - *) gt_api_version=1 ;; - esac - gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" - gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" - - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - - - if test $gt_api_version -ge 3; then - gt_revision_test_code=' -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -' - else - gt_revision_test_code= - fi - if test $gt_api_version -ge 2; then - gt_expression_test_code=' + * ngettext ("", "", 0)' - else - gt_expression_test_code= - fi - - { echo "$as_me:$LINENO: checking for GNU gettext in libc" >&5 -echo $ECHO_N "checking for GNU gettext in libc... $ECHO_C" >&6; } -if { as_var=$gt_func_gnugettext_libc; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern int *_nl_domain_bindings; -int -main () -{ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - eval "$gt_func_gnugettext_libc=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$gt_func_gnugettext_libc=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval echo '${'$gt_func_gnugettext_libc'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - - - - - - am_save_CPPFLAGS="$CPPFLAGS" - - for element in $INCICONV; do - haveit= - for x in $CPPFLAGS; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" - fi - done - - - { echo "$as_me:$LINENO: checking for iconv" >&5 -echo $ECHO_N "checking for iconv... $ECHO_C" >&6; } -if test "${am_cv_func_iconv+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -int -main () -{ -iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - am_cv_func_iconv=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -int -main () -{ -iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - am_cv_lib_iconv=yes - am_cv_func_iconv=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$am_save_LIBS" - fi - -fi -{ echo "$as_me:$LINENO: result: $am_cv_func_iconv" >&5 -echo "${ECHO_T}$am_cv_func_iconv" >&6; } - if test "$am_cv_func_iconv" = yes; then - { echo "$as_me:$LINENO: checking for working iconv" >&5 -echo $ECHO_N "checking for working iconv... $ECHO_C" >&6; } -if test "${am_cv_func_iconv_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - am_save_LIBS="$LIBS" - if test $am_cv_lib_iconv = yes; then - LIBS="$LIBS $LIBICONV" - fi - if test "$cross_compiling" = yes; then - case "$host_os" in - aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; - *) am_cv_func_iconv_works="guessing yes" ;; - esac -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include -#include -int main () -{ - /* Test against AIX 5.1 bug: Failures are not distinguishable from successful - returns. */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static const char input[] = "\342\202\254"; /* EURO SIGN */ - char buf[10]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - return 1; - } - } -#if 0 /* This bug could be worked around by the caller. */ - /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; - char buf[50]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_88591_to_utf8, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if ((int)res > 0) - return 1; - } - } -#endif - /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is - provided. */ - if (/* Try standardized names. */ - iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) - /* Try IRIX, OSF/1 names. */ - && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) - /* Try AIX names. */ - && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) - /* Try HP-UX names. */ - && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) - return 1; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - am_cv_func_iconv_works=yes -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -am_cv_func_iconv_works=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - - LIBS="$am_save_LIBS" - -fi -{ echo "$as_me:$LINENO: result: $am_cv_func_iconv_works" >&5 -echo "${ECHO_T}$am_cv_func_iconv_works" >&6; } - case "$am_cv_func_iconv_works" in - *no) am_func_iconv=no am_cv_lib_iconv=no ;; - *) am_func_iconv=yes ;; - esac - else - am_func_iconv=no am_cv_lib_iconv=no - fi - if test "$am_func_iconv" = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_ICONV 1 -_ACEOF - - fi - if test "$am_cv_lib_iconv" = yes; then - { echo "$as_me:$LINENO: checking how to link with libiconv" >&5 -echo $ECHO_N "checking how to link with libiconv... $ECHO_C" >&6; } - { echo "$as_me:$LINENO: result: $LIBICONV" >&5 -echo "${ECHO_T}$LIBICONV" >&6; } - else - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - - - - - - - - - use_additional=yes - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - -# Check whether --with-libintl-prefix was given. -if test "${with_libintl_prefix+set}" = set; then - withval=$with_libintl_prefix; - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - fi - fi - -fi - - LIBINTL= - LTLIBINTL= - INCINTL= - LIBINTL_PREFIX= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='intl ' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" - else - : - fi - else - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - if test "$acl_hardcode_direct" = yes; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - haveit= - for x in $LDFLAGS $LIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" - fi - fi - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - LIBINTL_PREFIX="$basedir" - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INCINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - if test -n "$found_la"; then - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIBINTL; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" - ;; - esac - done - fi - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" - else - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - for found_dir in $ltrpathdirs; do - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" - done - fi - - { echo "$as_me:$LINENO: checking for GNU gettext in libintl" >&5 -echo $ECHO_N "checking for GNU gettext in libintl... $ECHO_C" >&6; } -if { as_var=$gt_func_gnugettext_libintl; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - gt_save_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); -int -main () -{ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - eval "$gt_func_gnugettext_libintl=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$gt_func_gnugettext_libintl=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then - LIBS="$LIBS $LIBICONV" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); -int -main () -{ -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("") - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - LIBINTL="$LIBINTL $LIBICONV" - LTLIBINTL="$LTLIBINTL $LTLIBICONV" - eval "$gt_func_gnugettext_libintl=yes" - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - fi - CPPFLAGS="$gt_save_CPPFLAGS" - LIBS="$gt_save_LIBS" -fi -ac_res=`eval echo '${'$gt_func_gnugettext_libintl'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - fi - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ - || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ - && test "$PACKAGE" != gettext-runtime \ - && test "$PACKAGE" != gettext-tools; }; then - gt_use_preinstalled_gnugettext=yes - else - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - - - if test -n "$INTL_MACOSX_LIBS"; then - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" - LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" - fi - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - -cat >>confdefs.h <<\_ACEOF -#define ENABLE_NLS 1 -_ACEOF - - else - USE_NLS=no - fi - fi - - { echo "$as_me:$LINENO: checking whether to use NLS" >&5 -echo $ECHO_N "checking whether to use NLS... $ECHO_C" >&6; } - { echo "$as_me:$LINENO: result: $USE_NLS" >&5 -echo "${ECHO_T}$USE_NLS" >&6; } - if test "$USE_NLS" = "yes"; then - { echo "$as_me:$LINENO: checking where the gettext function comes from" >&5 -echo $ECHO_N "checking where the gettext function comes from... $ECHO_C" >&6; } - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - gt_source="external libintl" - else - gt_source="libc" - fi - else - gt_source="included intl directory" - fi - { echo "$as_me:$LINENO: result: $gt_source" >&5 -echo "${ECHO_T}$gt_source" >&6; } - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - { echo "$as_me:$LINENO: checking how to link with libintl" >&5 -echo $ECHO_N "checking how to link with libintl... $ECHO_C" >&6; } - { echo "$as_me:$LINENO: result: $LIBINTL" >&5 -echo "${ECHO_T}$LIBINTL" >&6; } - - for element in $INCINTL; do - haveit= - for x in $CPPFLAGS; do - - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" - - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" - fi - done - - fi - - -cat >>confdefs.h <<\_ACEOF -#define HAVE_GETTEXT 1 -_ACEOF - - -cat >>confdefs.h <<\_ACEOF -#define HAVE_DCGETTEXT 1 -_ACEOF - - fi - - POSUB=po - fi - - - - INTLLIBS="$LIBINTL" - - - - - - - - - - -# Check whether --enable-static was given. -if test "${enable_static+set}" = set; then - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_static=no -fi - - - -# Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_shared=yes -fi - - -# Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_fast_install=yes -fi - - -{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 -echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } -if test "${lt_cv_path_SED+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done - -fi - -SED=$lt_cv_path_SED - -{ echo "$as_me:$LINENO: result: $SED" >&5 -echo "${ECHO_T}$SED" >&6; } - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 -echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { echo "$as_me:$LINENO: checking for GNU ld" >&5 -echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } -else - { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } -fi -if test "${lt_cv_path_LD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 -echo "${ECHO_T}$LD" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi -test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } -if test "${lt_cv_prog_gnu_ld+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - -{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } -if test "${lt_cv_ld_reload_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac - -{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 -echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; } -if test "${lt_cv_path_NM+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi -fi -{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 -echo "${ECHO_T}$lt_cv_path_NM" >&6; } -NM="$lt_cv_path_NM" - -{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 -echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } -else - { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -echo "${ECHO_T}no, using $LN_S" >&6; } -fi - -{ echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 -echo $ECHO_N "checking how to recognize dependent libraries... $ECHO_C" >&6; } -if test "${lt_cv_deplibs_check_method+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -nto-qnx*) - lt_cv_deplibs_check_method=unknown - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 -echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval=$enable_libtool_lock; -fi - -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 10649 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } -if test "${lt_cv_cc_needs_belf+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - lt_cv_cc_needs_belf=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - lt_cv_cc_needs_belf=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-cygwin* | *-*-mingw* | *-*-pw32*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_DLLTOOL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { echo "$as_me:$LINENO: result: $DLLTOOL" >&5 -echo "${ECHO_T}$DLLTOOL" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5 -echo "${ECHO_T}$ac_ct_DLLTOOL" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. -set dummy ${ac_tool_prefix}as; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AS="${ac_tool_prefix}as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -AS=$ac_cv_prog_AS -if test -n "$AS"; then - { echo "$as_me:$LINENO: result: $AS" >&5 -echo "${ECHO_T}$AS" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AS"; then - ac_ct_AS=$AS - # Extract the first word of "as", so it can be a program name with args. -set dummy as; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_AS+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_AS"; then - ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AS="as" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_AS=$ac_cv_prog_ac_ct_AS -if test -n "$ac_ct_AS"; then - { echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 -echo "${ECHO_T}$ac_ct_AS" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_AS" = x; then - AS="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - AS=$ac_ct_AS - fi -else - AS="$ac_cv_prog_AS" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_OBJDUMP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { echo "$as_me:$LINENO: result: $OBJDUMP" >&5 -echo "${ECHO_T}$OBJDUMP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 -echo "${ECHO_T}$ac_ct_OBJDUMP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - - ;; - -esac - -need_locks="$enable_libtool_lock" - - - -for ac_header in dlfcn.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } -else - # Is the header compilable? -{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6; } - -# Is the header present? -{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ---------------------------------------------- ## -## Report this to tre-general@lists.laurikari.net ## -## ---------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval echo '${'$as_ac_Header'}'` - { echo "$as_me:$LINENO: result: $ac_res" >&5 -echo "${ECHO_T}$ac_res" >&6; } - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -# find the maximum length of command line arguments -{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 -echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } -if test "${lt_cv_sys_max_cmd_len+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ - = "XX$teststring") >/dev/null 2>&1 && - new_result=`expr "X$teststring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - teststring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac - -fi - -if test -n $lt_cv_sys_max_cmd_len ; then - { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 -echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } -else - { echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6; } -fi - - - - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 -echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32*) - symcode='[ABCDGISTW]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[ABCDEGRST]' - fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -linux* | k*bsd*-gnu) - if test "$host_cpu" = ia64; then - symcode='[ABCDGIRSTW]' - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if grep ' nm_test_var$' "$nlist" >/dev/null; then - if grep ' nm_test_func$' "$nlist" >/dev/null; then - cat < conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' - - cat <> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[] = -{ -EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { echo "$as_me:$LINENO: result: failed" >&5 -echo "${ECHO_T}failed" >&6; } -else - { echo "$as_me:$LINENO: result: ok" >&5 -echo "${ECHO_T}ok" >&6; } -fi - -{ echo "$as_me:$LINENO: checking for objdir" >&5 -echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } -if test "${lt_cv_objdir+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 -echo "${ECHO_T}$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -echo "${ECHO_T}$ac_ct_AR" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -else - AR="$ac_cv_prog_AR" -fi - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { echo "$as_me:$LINENO: checking for file" >&5 -echo $ECHO_N "checking for file... $ECHO_C" >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -echo "${ECHO_T}$MAGIC_CMD" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_DSYMUTIL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 -echo "${ECHO_T}$DSYMUTIL" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 -echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_NMEDIT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { echo "$as_me:$LINENO: result: $NMEDIT" >&5 -echo "${ECHO_T}$NMEDIT" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 -echo "${ECHO_T}$ac_ct_NMEDIT" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - - { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 -echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; } -if test "${lt_cv_apple_cc_single_mod+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - echo "int foo(void){return 1;}" > conftest.c - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib ${wl}-single_module conftest.c - if test -f libconftest.dylib; then - lt_cv_apple_cc_single_mod=yes - rm -rf libconftest.dylib* - fi - rm conftest.c - fi -fi -{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 -echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; } - { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 -echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; } -if test "${lt_cv_ld_exported_symbols_list+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - lt_cv_ld_exported_symbols_list=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - lt_cv_ld_exported_symbols_list=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 -echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; } - case $host_os in - rhapsody* | darwin1.[0123]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" - fi - if test "$DSYMUTIL" != ":"; then - _lt_dsymutil="~$DSYMUTIL \$lib || :" - else - _lt_dsymutil= - fi - ;; - esac - - -enable_dlopen=no -enable_win32_dll=yes - -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval=$enable_libtool_lock; -fi - -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - - -# Check whether --with-pic was given. -if test "${with_pic+set}" = set; then - withval=$with_pic; pic_mode="$withval" -else - pic_mode=default -fi - -test -z "$pic_mode" && pic_mode=default - -# Use C for the default configuration in the libtool script -tagname= -lt_save_CC="$CC" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* - - - -lt_prog_compiler_no_builtin_flag= - -if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag=' -fno-builtin' - - -{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:12555: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:12559: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $rm conftest* - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - -lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - -{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } - - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic='-qnocommon' - lt_prog_compiler_wl='-Wl,' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - linux* | k*bsd*-gnu) - case $cc_basename in - icc* | ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - esac - ;; - esac - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 -echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - -{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } -if test "${lt_cv_prog_compiler_pic_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:12845: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:12849: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $rm conftest* - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; } - -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } -if test "${lt_cv_prog_compiler_static_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $rm -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; } - -if test x"$lt_cv_prog_compiler_static_works" = xyes; then - : -else - lt_prog_compiler_static= -fi - - -{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } -if test "${lt_cv_prog_compiler_c_o+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_prog_compiler_c_o=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:12949: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:12953: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 -echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { echo "$as_me:$LINENO: result: $hard_links" >&5 -echo "${ECHO_T}$hard_links" >&6; } - if test "$hard_links" = no; then - { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - -{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } - - runpath_var= - allow_undefined_flag= - enable_shared_with_static_runtimes=no - archive_cmds= - archive_expsym_cmds= - old_archive_From_new_cmds= - old_archive_from_expsyms_cmds= - export_dynamic_flag_spec= - whole_archive_flag_spec= - thread_safe_flag_spec= - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld= - hardcode_libdir_separator= - hardcode_direct=no - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - link_all_deplibs=unknown - hardcode_automatic=no - module_cmds= - module_expsym_cmds= - always_export_symbols=no - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - ld_shlibs=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - cat <&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs=no - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - *) - tmp_sharedflag='-shared' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test $supports_anon_versioning = yes; then - archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - link_all_deplibs=no - else - ld_shlibs=no - fi - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = no; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no - ;; - - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes=yes - ;; - - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - whole_archive_flag_spec='' - link_all_deplibs=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs=no - ;; - esac - fi - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - if test "$GCC" = yes; then - archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - - hardcode_direct=yes - export_dynamic_flag_spec='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_libdir_flag_spec_ld='+b $libdir' - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - export_dynamic_flag_spec='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld='-rpath $libdir' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - link_all_deplibs=yes - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - - solaris*) - no_undefined_flag=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - fi - -{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 -echo "${ECHO_T}$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } - $rm conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc=no - else - archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 -echo "${ECHO_T}$archive_cmds_need_lc" >&6; } - ;; - esac - fi - ;; -esac - -{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" - -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else - lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - sys_lib_search_path_spec=`echo $lt_search_path_spec` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -echo "${ECHO_T}$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" -fi - -sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" -fi - -sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var" || \ - test "X$hardcode_automatic" = "Xyes" ; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 -echo "${ECHO_T}$hardcode_action" >&6; } - -if test "$hardcode_action" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -striplib= -old_striplib= -{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - ;; - *) - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } - ;; - esac -fi - -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dl_dlopen=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - *) - { echo "$as_me:$LINENO: checking for shl_load" >&5 -echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } -if test "${ac_cv_func_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case declares shl_load. - For example, HP-UX 11i declares gettimeofday. */ -#define shl_load innocuous_shl_load - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef shl_load - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_shl_load || defined __stub___shl_load -choke me -#endif - -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_func_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_shl_load=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } -if test $ac_cv_func_shl_load = yes; then - lt_cv_dlopen="shl_load" -else - { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dld_shl_load=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } -if test $ac_cv_lib_dld_shl_load = yes; then - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" -else - { echo "$as_me:$LINENO: checking for dlopen" >&5 -echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } -if test "${ac_cv_func_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case declares dlopen. - For example, HP-UX 11i declares gettimeofday. */ -#define dlopen innocuous_dlopen - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef dlopen - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_dlopen || defined __stub___dlopen -choke me -#endif - -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_func_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_dlopen=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } -if test $ac_cv_func_dlopen = yes; then - lt_cv_dlopen="dlopen" -else - { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dl_dlopen=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } -if test $ac_cv_lib_dl_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 -echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } -if test "${ac_cv_lib_svld_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_svld_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_svld_dlopen=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } -if test $ac_cv_lib_svld_dlopen = yes; then - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 -echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } -if test "${ac_cv_lib_dld_dld_link+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && - $as_test_x conftest$ac_exeext; then - ac_cv_lib_dld_dld_link=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dld_dld_link=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } -if test $ac_cv_lib_dld_dld_link = yes; then - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 -echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } -if test "${lt_cv_dlopen_self+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 -echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } -if test "${lt_cv_dlopen_self_static+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext < -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - exit (status); -} -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 -echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - -# Report which library types will actually be built -{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } -{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 -echo "${ECHO_T}$can_build_shared" >&6; } - -{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -{ echo "$as_me:$LINENO: result: $enable_shared" >&5 -echo "${ECHO_T}$enable_shared" >&6; } - -{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -{ echo "$as_me:$LINENO: result: $enable_static" >&5 -echo "${ECHO_T}$enable_static" >&6; } - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler \ - CC \ - LD \ - lt_prog_compiler_wl \ - lt_prog_compiler_pic \ - lt_prog_compiler_static \ - lt_prog_compiler_no_builtin_flag \ - export_dynamic_flag_spec \ - thread_safe_flag_spec \ - whole_archive_flag_spec \ - enable_shared_with_static_runtimes \ - old_archive_cmds \ - old_archive_from_new_cmds \ - predep_objects \ - postdep_objects \ - predeps \ - postdeps \ - compiler_lib_search_path \ - compiler_lib_search_dirs \ - archive_cmds \ - archive_expsym_cmds \ - postinstall_cmds \ - postuninstall_cmds \ - old_archive_from_expsyms_cmds \ - allow_undefined_flag \ - no_undefined_flag \ - export_symbols_cmds \ - hardcode_libdir_flag_spec \ - hardcode_libdir_flag_spec_ld \ - hardcode_libdir_separator \ - hardcode_automatic \ - module_cmds \ - module_expsym_cmds \ - lt_cv_prog_compiler_c_o \ - fix_srcfile_path \ - exclude_expsyms \ - include_expsyms; do - - case $var in - old_archive_cmds | \ - old_archive_from_new_cmds | \ - archive_cmds | \ - archive_expsym_cmds | \ - module_cmds | \ - module_expsym_cmds | \ - old_archive_from_expsyms_cmds | \ - export_symbols_cmds | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="${ofile}T" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - $rm -f "$cfgfile" - { echo "$as_me:$LINENO: creating $ofile" >&5 -echo "$as_me: creating $ofile" >&6;} - - cat <<__EOF__ >> "$cfgfile" -#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e 1s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS - -# A language-specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU C compiler? -with_gcc=$GCC - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_LD - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps - -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_compiler_lib_search_dirs - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# ### END LIBTOOL CONFIG - -__EOF__ - - - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - - if test -f "$ltmain"; then - if test ! -f "${ofile}"; then - { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 -echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 -echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} - else - { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 -echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} - fi - fi - - - fi - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - -# Prevent multiple expansion - - - - - - - - - - -ac_config_headers="$ac_config_headers config.h lib/tre-config.h" - -ac_config_files="$ac_config_files Makefile doc/Makefile doc/agrep.1 lib/Makefile m4/Makefile po/Makefile.in src/Makefile tests/Makefile tests/agrep/Makefile tre.pc tre.spec utils/Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - *) $as_unset $ac_var ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - test "x$cache_file" != "x/dev/null" && - { echo "$as_me:$LINENO: updating cache $cache_file" >&5 -echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file - else - { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TRE_DEBUG_TRUE}" && test -z "${TRE_DEBUG_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TRE_DEBUG\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TRE_DEBUG\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TRE_DEBUG_TRUE}" && test -z "${TRE_DEBUG_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TRE_DEBUG\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TRE_DEBUG\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TRE_PROFILE_TRUE}" && test -z "${TRE_PROFILE_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TRE_PROFILE\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TRE_PROFILE\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TRE_PROFILE_TRUE}" && test -z "${TRE_PROFILE_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TRE_PROFILE\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TRE_PROFILE\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TRE_APPROX_TRUE}" && test -z "${TRE_APPROX_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TRE_APPROX\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TRE_APPROX\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TRE_APPROX_TRUE}" && test -z "${TRE_APPROX_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TRE_APPROX\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TRE_APPROX\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TRE_AGREP_TRUE}" && test -z "${TRE_AGREP_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TRE_AGREP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TRE_AGREP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TRE_AGREP_TRUE}" && test -z "${TRE_AGREP_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TRE_AGREP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TRE_AGREP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TRE_MULTIBYTE_TRUE}" && test -z "${TRE_MULTIBYTE_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TRE_MULTIBYTE\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TRE_MULTIBYTE\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${TRE_MULTIBYTE_TRUE}" && test -z "${TRE_MULTIBYTE_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"TRE_MULTIBYTE\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"TRE_MULTIBYTE\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi - -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -as_nl=' -' -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } -fi - -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# CDPATH. -$as_unset CDPATH - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in --n*) - case `echo 'x\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; - esac;; -*) - ECHO_N='-n';; -esac - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir -fi -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 - -# Save the log message, to keep $[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by TRE $as_me 0.8.0, which was -generated by GNU Autoconf 2.61. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -TRE config.status 0.8.0 -configured by $0, generated by GNU Autoconf 2.61, - with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" - -Copyright (C) 2006 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - echo "$ac_cs_version"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - { echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -if \$ac_cs_recheck; then - echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - CONFIG_SHELL=$SHELL - export CONFIG_SHELL - exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" -# Capture the value of obsolete ALL_LINGUAS because we need it to compute - # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it - # from automake < 1.5. - eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="${LINGUAS-%UNSET%}" - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;; - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "lib/tre-config.h") CONFIG_HEADERS="$CONFIG_HEADERS lib/tre-config.h" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; - "doc/agrep.1") CONFIG_FILES="$CONFIG_FILES doc/agrep.1" ;; - "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; - "m4/Makefile") CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;; - "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;; - "tests/agrep/Makefile") CONFIG_FILES="$CONFIG_FILES tests/agrep/Makefile" ;; - "tre.pc") CONFIG_FILES="$CONFIG_FILES tre.pc" ;; - "tre.spec") CONFIG_FILES="$CONFIG_FILES tre.spec" ;; - "utils/Makefile") CONFIG_FILES="$CONFIG_FILES utils/Makefile" ;; - - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= - trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -# -# Set up the sed scripts for CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "$CONFIG_FILES"; then - -_ACEOF - - - -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - cat >conf$$subs.sed <<_ACEOF -SHELL!$SHELL$ac_delim -PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim -PACKAGE_NAME!$PACKAGE_NAME$ac_delim -PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim -PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim -PACKAGE_STRING!$PACKAGE_STRING$ac_delim -PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim -exec_prefix!$exec_prefix$ac_delim -prefix!$prefix$ac_delim -program_transform_name!$program_transform_name$ac_delim -bindir!$bindir$ac_delim -sbindir!$sbindir$ac_delim -libexecdir!$libexecdir$ac_delim -datarootdir!$datarootdir$ac_delim -datadir!$datadir$ac_delim -sysconfdir!$sysconfdir$ac_delim -sharedstatedir!$sharedstatedir$ac_delim -localstatedir!$localstatedir$ac_delim -includedir!$includedir$ac_delim -oldincludedir!$oldincludedir$ac_delim -docdir!$docdir$ac_delim -infodir!$infodir$ac_delim -htmldir!$htmldir$ac_delim -dvidir!$dvidir$ac_delim -pdfdir!$pdfdir$ac_delim -psdir!$psdir$ac_delim -libdir!$libdir$ac_delim -localedir!$localedir$ac_delim -mandir!$mandir$ac_delim -DEFS!$DEFS$ac_delim -ECHO_C!$ECHO_C$ac_delim -ECHO_N!$ECHO_N$ac_delim -ECHO_T!$ECHO_T$ac_delim -LIBS!$LIBS$ac_delim -build_alias!$build_alias$ac_delim -host_alias!$host_alias$ac_delim -target_alias!$target_alias$ac_delim -build!$build$ac_delim -build_cpu!$build_cpu$ac_delim -build_vendor!$build_vendor$ac_delim -build_os!$build_os$ac_delim -host!$host$ac_delim -host_cpu!$host_cpu$ac_delim -host_vendor!$host_vendor$ac_delim -host_os!$host_os$ac_delim -target!$target$ac_delim -target_cpu!$target_cpu$ac_delim -target_vendor!$target_vendor$ac_delim -target_os!$target_os$ac_delim -INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim -INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim -INSTALL_DATA!$INSTALL_DATA$ac_delim -am__isrc!$am__isrc$ac_delim -CYGPATH_W!$CYGPATH_W$ac_delim -PACKAGE!$PACKAGE$ac_delim -VERSION!$VERSION$ac_delim -ACLOCAL!$ACLOCAL$ac_delim -AUTOCONF!$AUTOCONF$ac_delim -AUTOMAKE!$AUTOMAKE$ac_delim -AUTOHEADER!$AUTOHEADER$ac_delim -MAKEINFO!$MAKEINFO$ac_delim -install_sh!$install_sh$ac_delim -STRIP!$STRIP$ac_delim -INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim -mkdir_p!$mkdir_p$ac_delim -AWK!$AWK$ac_delim -SET_MAKE!$SET_MAKE$ac_delim -am__leading_dot!$am__leading_dot$ac_delim -AMTAR!$AMTAR$ac_delim -am__tar!$am__tar$ac_delim -am__untar!$am__untar$ac_delim -CC!$CC$ac_delim -CFLAGS!$CFLAGS$ac_delim -LDFLAGS!$LDFLAGS$ac_delim -CPPFLAGS!$CPPFLAGS$ac_delim -ac_ct_CC!$ac_ct_CC$ac_delim -EXEEXT!$EXEEXT$ac_delim -OBJEXT!$OBJEXT$ac_delim -DEPDIR!$DEPDIR$ac_delim -am__include!$am__include$ac_delim -am__quote!$am__quote$ac_delim -AMDEP_TRUE!$AMDEP_TRUE$ac_delim -AMDEP_FALSE!$AMDEP_FALSE$ac_delim -AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim -CCDEPMODE!$CCDEPMODE$ac_delim -am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim -am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim -CPP!$CPP$ac_delim -TRE_VERSION!$TRE_VERSION$ac_delim -TRE_DEBUG_TRUE!$TRE_DEBUG_TRUE$ac_delim -TRE_DEBUG_FALSE!$TRE_DEBUG_FALSE$ac_delim -TRE_PROFILE_TRUE!$TRE_PROFILE_TRUE$ac_delim -TRE_PROFILE_FALSE!$TRE_PROFILE_FALSE$ac_delim -TRE_APPROX_TRUE!$TRE_APPROX_TRUE$ac_delim -TRE_APPROX_FALSE!$TRE_APPROX_FALSE$ac_delim -TRE_AGREP_TRUE!$TRE_AGREP_TRUE$ac_delim -TRE_AGREP_FALSE!$TRE_AGREP_FALSE$ac_delim -_ACEOF - - if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then - break - elif $ac_last_try; then - { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -if test -n "$ac_eof"; then - ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` - ac_eof=`expr $ac_eof + 1` -fi - -cat >>$CONFIG_STATUS <<_ACEOF -cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -_ACEOF -sed ' -s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -s/^/s,@/; s/!/@,|#_!!_#|/ -:n -t n -s/'"$ac_delim"'$/,g/; t -s/$/\\/; p -N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF -CEOF$ac_eof -_ACEOF - - -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - cat >conf$$subs.sed <<_ACEOF -GREP!$GREP$ac_delim -EGREP!$EGREP$ac_delim -ALLOCA!$ALLOCA$ac_delim -TRE_MULTIBYTE_TRUE!$TRE_MULTIBYTE_TRUE$ac_delim -TRE_MULTIBYTE_FALSE!$TRE_MULTIBYTE_FALSE$ac_delim -USE_NLS!$USE_NLS$ac_delim -GETTEXT_MACRO_VERSION!$GETTEXT_MACRO_VERSION$ac_delim -MSGFMT!$MSGFMT$ac_delim -GMSGFMT!$GMSGFMT$ac_delim -MSGFMT_015!$MSGFMT_015$ac_delim -GMSGFMT_015!$GMSGFMT_015$ac_delim -XGETTEXT!$XGETTEXT$ac_delim -XGETTEXT_015!$XGETTEXT_015$ac_delim -MSGMERGE!$MSGMERGE$ac_delim -XGETTEXT_EXTRA_OPTIONS!$XGETTEXT_EXTRA_OPTIONS$ac_delim -INTL_MACOSX_LIBS!$INTL_MACOSX_LIBS$ac_delim -LIBICONV!$LIBICONV$ac_delim -LTLIBICONV!$LTLIBICONV$ac_delim -INTLLIBS!$INTLLIBS$ac_delim -LIBINTL!$LIBINTL$ac_delim -LTLIBINTL!$LTLIBINTL$ac_delim -POSUB!$POSUB$ac_delim -SED!$SED$ac_delim -LN_S!$LN_S$ac_delim -ECHO!$ECHO$ac_delim -AR!$AR$ac_delim -RANLIB!$RANLIB$ac_delim -DSYMUTIL!$DSYMUTIL$ac_delim -NMEDIT!$NMEDIT$ac_delim -DLLTOOL!$DLLTOOL$ac_delim -AS!$AS$ac_delim -OBJDUMP!$OBJDUMP$ac_delim -LIBTOOL!$LIBTOOL$ac_delim -LIBOBJS!$LIBOBJS$ac_delim -LTLIBOBJS!$LTLIBOBJS$ac_delim -_ACEOF - - if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 35; then - break - elif $ac_last_try; then - { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -if test -n "$ac_eof"; then - ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` - ac_eof=`expr $ac_eof + 1` -fi - -cat >>$CONFIG_STATUS <<_ACEOF -cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end -_ACEOF -sed ' -s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -s/^/s,@/; s/!/@,|#_!!_#|/ -:n -t n -s/'"$ac_delim"'$/,g/; t -s/$/\\/; p -N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF -:end -s/|#_!!_#|//g -CEOF$ac_eof -_ACEOF - - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ -s/:*$// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF -fi # test -n "$CONFIG_FILES" - - -for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -echo "$as_me: error: Invalid tag $ac_tag." >&2;} - { (exit 1); exit 1; }; };; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -echo "$as_me: error: cannot find input file: $ac_f" >&2;} - { (exit 1); exit 1; }; };; - esac - ac_file_inputs="$ac_file_inputs $ac_f" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input="Generated from "`IFS=: - echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - fi - - case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin";; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= - -case `sed -n '/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p -' $ac_file_inputs` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s&@configure_input@&$configure_input&;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 -echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} - - rm -f "$tmp/stdin" - case $ac_file in - -) cat "$tmp/out"; rm -f "$tmp/out";; - *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; - esac - ;; - :H) - # - # CONFIG_HEADER - # -_ACEOF - -# Transform confdefs.h into a sed script `conftest.defines', that -# substitutes the proper values into config.h.in to produce config.h. -rm -f conftest.defines conftest.tail -# First, append a space to every undef/define line, to ease matching. -echo 's/$/ /' >conftest.defines -# Then, protect against being on the right side of a sed subst, or in -# an unquoted here document, in config.status. If some macros were -# called several times there might be several #defines for the same -# symbol, which is useless. But do not sort them, since the last -# AC_DEFINE must be honored. -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where -# NAME is the cpp macro being defined, VALUE is the value it is being given. -# PARAMS is the parameter list in the macro definition--in most cases, it's -# just an empty string. -ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' -ac_dB='\\)[ (].*,\\1define\\2' -ac_dC=' ' -ac_dD=' ,' - -uniq confdefs.h | - sed -n ' - t rset - :rset - s/^[ ]*#[ ]*define[ ][ ]*// - t ok - d - :ok - s/[\\&,]/\\&/g - s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p - s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p - ' >>conftest.defines - -# Remove the space that was appended to ease matching. -# Then replace #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -# (The regexp can be short, since the line contains either #define or #undef.) -echo 's/ $// -s,^[ #]*u.*,/* & */,' >>conftest.defines - -# Break up conftest.defines: -ac_max_sed_lines=50 - -# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" -# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" -# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" -# et cetera. -ac_in='$ac_file_inputs' -ac_out='"$tmp/out1"' -ac_nxt='"$tmp/out2"' - -while : -do - # Write a here document: - cat >>$CONFIG_STATUS <<_ACEOF - # First, check the format of the line: - cat >"\$tmp/defines.sed" <<\\CEOF -/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def -/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def -b -:def -_ACEOF - sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS - echo 'CEOF - sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS - ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in - sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail - grep . conftest.tail >/dev/null || break - rm -f conftest.defines - mv conftest.tail conftest.defines -done -rm -f conftest.defines conftest.tail - -echo "ac_result=$ac_in" >>$CONFIG_STATUS -cat >>$CONFIG_STATUS <<\_ACEOF - if test x"$ac_file" != x-; then - echo "/* $configure_input */" >"$tmp/config.h" - cat "$ac_result" >>"$tmp/config.h" - if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then - { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f $ac_file - mv "$tmp/config.h" $ac_file - fi - else - echo "/* $configure_input */" - cat "$ac_result" - fi - rm -f "$tmp/out12" -# Compute $ac_file's index in $config_headers. -_am_arg=$ac_file -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 -echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir=$dirpart/$fdir - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done - ;; - "po-directories":C) - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - # Treat a directory as a PO directory if and only if it has a - # POTFILES.in file. This allows packages to have multiple PO - # directories under different names or in different locations. - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - POMAKEFILEDEPS="POTFILES.in" - # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` - # Hide the ALL_LINGUAS assigment from automake < 1.5. - eval 'ALL_LINGUAS''=$ALL_LINGUAS_' - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # The set of available languages was given in configure.in. - # Hide the ALL_LINGUAS assigment from automake < 1.5. - eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' - fi - # Compute POFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) - # Compute UPDATEPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) - # Compute DUMMYPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) - # Compute GMOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - UPDATEPOFILES= - DUMMYPOFILES= - GMOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done ;; - - esac -done # for ac_tag - - -{ (exit 0); exit 0; } -_ACEOF -chmod +x $CONFIG_STATUS -ac_clean_files=$ac_clean_files_save - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } -fi - - - - -cat <@]), - [ tre_profile="$enableval" ], - [ tre_profile="no" ]) - -AC_ARG_ENABLE(debug, - AC_HELP_STRING( - [--enable-debug], - [enable development-time debugging @<:@default=disabled@:>@]), - [ tre_debug="$enableval" ], - [ tre_debug="no" ]) -if test "$tre_debug" = "yes"; then - AM_CONDITIONAL(TRE_DEBUG, true) - AC_DEFINE(TRE_DEBUG, 1, - [ Define if you want TRE to print debug messages to stdout. ]) -else - AM_CONDITIONAL(TRE_DEBUG, false) - AC_DEFINE(NDEBUG, 1, [ Define if you want to disable debug assertions. ]) -fi - -if test "$tre_profile" = "yes"; then - CFLAGS="$CFLAGS -pg" - AM_CONDITIONAL(TRE_PROFILE, true) -else - AM_CONDITIONAL(TRE_PROFILE, false) -fi - -AC_ARG_ENABLE(warnings, - AC_HELP_STRING( - [--disable-warnings], - [disable C compiler warning messages @<:@default=enabled@:>@]), - [ tre_cc_warnings="$enableval" ], - [ tre_cc_warnings="yes" ]) -if test "$tre_cc_warnings" = "yes"; then - VL_PROG_CC_WARNINGS() -fi - -AC_ARG_ENABLE(approx, - AC_HELP_STRING( - [--disable-approx], - [disable the approximate matching functionality @<:@default=enabled@:>@]), - [ tre_approx="$enableval" ], - [ tre_approx="yes" ]) -if test "$tre_approx" = "yes"; then - AC_DEFINE(TRE_APPROX, 1, - [ Define if you want to enable approximate matching functionality. ]) - AM_CONDITIONAL(TRE_APPROX, true) -else - AM_CONDITIONAL(TRE_APPROX, false) -fi - -if test "$tre_approx" = "yes"; then - AC_ARG_ENABLE(agrep, - AC_HELP_STRING([--disable-agrep], - [Do not build and install the agrep tool @<:@default=install@:>@]), - [ tre_agrep="$enableval" ], - [ tre_agrep="yes" ]) -else - tre_agrep="no (requires approximate matching)" -fi - -if test "$tre_agrep" = "yes"; then - AM_CONDITIONAL(TRE_AGREP, true) -else - AM_CONDITIONAL(TRE_AGREP, false) -fi - - -dnl Checks for compiler characteristics. -AC_C_CONST -AC_C_INLINE - -dnl Checks for headers, functions, types, and macros -AC_DEFINE(_GNU_SOURCE, 1, [ Define to enable GNU extensions in glibc ]) -AC_HEADER_STDC - -AC_ARG_WITH(alloca, - AC_HELP_STRING( - [--without-alloca], - [don't use alloca @<:@default=use@:>@]), - [ tre_use_alloca="$withval" ], - [ tre_use_alloca="yes" ]) -if test "$tre_use_alloca" = "yes"; then - ALLOCA="" - AC_FUNC_ALLOCA - if test -z "$ALLOCA"; then - # alloca() works. - AC_DEFINE(TRE_USE_ALLOCA, 1, - [ Define if you want TRE to use alloca() instead of malloc() when - allocating memory needed for regexec operations. ]) - fi -fi - -AC_ARG_ENABLE(system-abi, - AC_HELP_STRING( - [--enable-system-abi], - [try to make TRE compatible with the system \ -regex ABI @<:@default=disabled@:>@]), - [ tre_system_abi="$enableval" ], - [ tre_system_abi="no" ]) - -# If we are building a version compatible with the system ABI, we need to -# find an absolute path to the system regex.h (so it can be included from -# TRE regex.h using `#include "/path/to/regex.h"'). Then we need to -# find a field in the system defined regex_t struct where a pointer to -# the compiled regex object can be stored. - -if test "$tre_system_abi" = "yes"; then - # Check that there is a system regex.h to begin with. We may need - # to include sys/types.h before regex.h, so check for that first. - AC_CHECK_HEADERS([sys/types.h]) - AC_CHECK_HEADERS([regex.h], [], - [ tre_system_abi="no (regex.h not found)" ], - [#if HAVE_SYS_TYPES_H -#include -#endif -]) -fi - -if test "$tre_system_abi" = "yes"; then - # Find out where system regex.h is. This is done by running the C - # preprocessor and grepping its output, hopefully getting a full - # path to regex.h. - AC_MSG_CHECKING([path to system regex.h]) - echo '#include ' > conftest.c - tre_system_regex_h=`$CPP conftest.c \ - | grep '^#[a-z]* [0-9]* "\(.*regex.h\)"' \ - | head -1 \ - | sed 's/^#[a-z]* [0-9]* \"\(.*\)\".*/\1/'` - rm -f conftest.c - if test -n "$tre_system_regex_h" && test -f "$tre_system_regex_h"; then - AC_MSG_RESULT($tre_system_regex_h) - else - AC_MSG_RESULT(unknown) - tre_system_abi="no (could determine path to systeg regex.h)" - fi -fi - -if test "$tre_system_abi" = "yes"; then - # Find a field in the system regex_t struct where we can store a pointer. - # This is done by trying several names that are known to work on different - # systems. - AC_MSG_CHECKING([for a usable field for a pointer in regex_t]) - tre_regex_t_field="" - for field in buffer re_comp __re_comp __reg_expression \ - re_g "re_pad@<:@0@:>@"; do - if test -z "$tre_regex_t_field"; then - AC_COMPILE_IFELSE( - [ AC_LANG_PROGRAM([ -#include -#include - ], - [ - regex_t foo; - void *bar = foo.$field; - foo.$field = bar; - ])], - [ AC_MSG_RESULT($field) - tre_regex_t_field="$field" ]) - fi - done - if test -z "$tre_regex_t_field"; then - AC_MSG_RESULT(no) - tre_system_abi="no (unknown regex_t contents, report to \ -$PACKAGE_BUGREPORT)" - fi -fi - -if test "$tre_system_abi" = "yes"; then - # So far, so good. Now check if we can redefine the system regex - # functions. For example, the system headers may define the - # standard functions as static wrapper functions (like on IRIX) - # which prevents redefining them later. - - # IRIX has some macro magic which we need to turn off. - AC_DEFINE(_REGCOMP_INTERNAL, 1, [ Define on IRIX ]) - AC_MSG_CHECKING([if POSIX regex functions can be redefined]) - AC_COMPILE_IFELSE( - [ AC_LANG_PROGRAM([ -#include -#include - -int -regcomp(regex_t *preg, const char *regex, int cflags) -{ - return 0; -} -void -regfree(regex_t *preg) -{ - return; -} -int -regexec(const regex_t *preg, const char *str, - size_t nmatch, regmatch_t pmatch@<:@@:>@, int eflags) -{ - return 0; -} -size_t -regerror(int errcode, const regex_t *preg, char *errbuf, - size_t errbuf_size) -{ - return 0; -} - ])], - [ AC_MSG_RESULT(yes) - tre_system_abi="yes" ], - [ AC_MSG_RESULT(no) - tre_system_abi="no (unable to redefine system functions)" ]) -fi - -if test "$tre_system_abi" = "yes"; then - # Great, everything seems to be OK for ABI compatibility. Just check - # some additional types that may or may not be defined, and set up - # variables to enable ABI compatibility in regex.h. - - AC_CHECK_TYPES([reg_errcode_t],,,[ -#ifdef HAVE_SYS_TYPES_H -#include -#endif /* HAVE_SYS_TYPES_H */ -#ifdef HAVE_REGEX_H -#include -#endif /* HAVE_REGEX_H */ - ]) - - AC_DEFINE(TRE_USE_SYSTEM_REGEX_H, 1, - [ Define to include the system regex.h from TRE regex.h ]) - AC_DEFINE_UNQUOTED(TRE_SYSTEM_REGEX_H_PATH, "$tre_system_regex_h", - [ Define to the absolute path to the system regex.h ]) - AC_DEFINE_UNQUOTED(TRE_REGEX_T_FIELD, $tre_regex_t_field, - [ Define to a field in the regex_t struct where TRE should store a - pointer to the internal tre_tnfa_t structure ]) -else - AC_DEFINE(TRE_REGEX_T_FIELD, value) -fi - -AC_CHECK_FUNCS([isascii isblank]) - -AC_CHECK_HEADERS([getopt.h]) -AC_CHECK_FUNCS([getopt_long],, - [ # FreeBSD has a "gnugetopt" library. - AC_CHECK_LIB([gnugetopt], [getopt_long], - [ AC_DEFINE([HAVE_GETOPT_LONG]) ]) ]) - -dnl Check whether wide character support should be enabled. -AC_ARG_ENABLE(wchar, - AC_HELP_STRING( - [--disable-wchar], - [disable the wide character (wchar_t) support @<:@default=detect@:>@]), - [ tre_enable_wchar="$enableval" ], - [ tre_enable_wchar="detect" ]) - -dnl Check whether libutf8 location has been given. -AC_ARG_WITH(libutf8, - AC_HELP_STRING( - [--with-libutf8@<:@=DIR@:>@], - [search for libutf8 from DIR/include and DIR/lib]) -AC_HELP_STRING( - [--without-libutf8], - [do not use libutf8 @<:@default=use if needed@:>@]), - [ if test "$with_val" = "no"; then - tre_libutf8="no" - else - tre_libutf8="yes" - tre_libutf8_dirs="$with_libutf8" - tre_libutf8_libs="-lutf8" - fi ], - [ tre_libutf8="detect" - tre_libutf8_dirs="none /usr /usr/local" - tre_libutf8_libs="none -lutf8" ]) - - -if test "$tre_enable_wchar" != "no"; then - - dnl Wide character support is requested. Check if we need libutf8. - old_libs="$LIBS" - old_ldflags="$LDFLAGS" - old_cppflags="$CPPFLAGS" - if test "$tre_libutf8" != "no"; then - AC_MSG_CHECKING([for libutf8]) - found="no" - dnl Go through directories in $tre_libutf8_dirs for CPPFLAGS and LDFLAGS. - for try_dir in $tre_libutf8_dirs; do - if test "$try_dir" = "none"; then - LDFLAGS="$old_ldflags" - CPPFLAGS="$old_cppflags" - else - LDFLAGS="$old_ldflags -L$try_dir/lib" - CPPFLAGS="$old_cppflags -I$try_dir/include" - fi - dnl Go through libs in $tre_libutf8_libs. - for try_lib in $tre_libutf8_libs; do - if test "$try_lib" = "none"; then - LIBS="$old_libs" - else - LIBS="$try_lib $old_libs" - fi - dnl Check if mbrtowc or utf8_mbrtowc is available with the current - dnl CPPFLAGS, LDFLAGS, and LIBS. - AC_LINK_IFELSE([AC_LANG_CALL([],[mbrtowc])],[found="yes"]) - if test "$found" = "yes"; then - break; - fi - AC_LINK_IFELSE([AC_LANG_CALL([],[utf8_mbrtowc])],[found="yes"]) - if test "$found" = "yes"; then - break; - fi - done - if test "$found" = "yes"; then - break; - fi - done - - dnl Report results. - if test "$found" = "yes"; then - if test "$LIBS" = "$old_libs"; then - AC_MSG_RESULT([not needed]) - tre_libutf8="no" - else - AC_MSG_RESULT([using from $try_dir/{lib,include}]) - tre_libutf8="yes" - fi - else - LIBS="$old_libs" - LDFLAGS="$old_ldflags" - CPPFLAGS="$old_cppflags" - if test "$tre_libutf8" = "detect"; then - AC_MSG_RESULT([no]) - tre_libutf8="no" - else - # Fail if libutf8 was requested but was not found. - AC_MSG_ERROR([not found]) - fi - fi - fi - - if test "$tre_libutf8" = "yes"; then - dnl We do need libutf8, use the libutf8 headers. - tre_wchar="yes" - AC_CHECK_HEADERS([libutf8.h]) - else - dnl Use the POSIX headers. - AC_CHECK_HEADERS([wchar.h wctype.h]) - fi - -else - tre_wchar_reason="disabled with --disable-wchar" - tre_wchar="no ($tre_wchar_reason)" -fi - - -tre_includes=" -#ifdef HAVE_WCHAR_H -#include -#endif /* HAVE_WCHAR_H */ -#ifdef HAVE_WCTYPE_H -#include -#endif /* HAVE_WCTYPE_H */ -#ifdef HAVE_LIBUTF8_H -#include -#endif /* HAVE_LIBUTF8_H */ -" - -if test "$tre_enable_wchar" != "no"; then - dnl We need wchar_t and WCHAR_MAX - AC_CHECK_TYPES([wchar_t], - [ tre_wchar="yes" - AX_DECL_WCHAR_MAX ], - [ tre_wchar_reason="wchar_t type not found" - tre_wchar="no ($tre_wchar_reason)" ], - [ $tre_includes ]) - - if test "$tre_wchar" = "yes"; then - dnl We need wint_t - AC_CHECK_TYPES([wint_t],, - [ tre_wchar_reason="wint_t type not found" - tre_wchar="no ($tre_wchar_reason)" ], - [ $tre_includes ]) - fi - - if test "$tre_wchar" = "yes"; then - dnl We may need mbstate_t - AC_CHECK_TYPES([mbstate_t],,,[ $tre_includes ]) - fi - - if test "$tre_wchar" = "yes"; then - dnl We need either wcsrtombs (preferred) or wcstombs - found="no" - AX_CHECK_FUNCS_COMP([wcsrtombs wcstombs],[found="yes"; break],, - [$tre_includes]) - if test "$found" = "no"; then - tre_wchar_reason="no wcsrtombs or wcstombs found" - tre_wchar="no ($tre_wchar_reason)" - fi - fi - - if test "$tre_wchar" = "yes"; then - dnl We need all these - AX_CHECK_FUNCS_COMP([iswlower iswupper towlower towupper wcschr \ - wcscpy wcslen wcsncpy], - [ tre_wchar="yes" ], - [ tre_wchar_reason="$ac_func not found" - tre_wchar="no ($tre_wchar_reason)" - break ], - [ $tre_includes ]) - fi -fi - -case $host in - *-mingw*) - dnl wcsrtombs and wcstombs don't seem to work at all on MinGW. - if test "$tre_libutf8" != "yes"; then - tre_wchar_reason="Not supported on MinGW" - tre_wchar="no ($tre_wchar_reason)" - fi - ;; -esac - -# Fail if wide character support was specifically requested but is -# not supported on this system. -if test "$tre_enable_wchar" = "yes"; then - if test "$tre_wchar" != "yes"; then - AC_MSG_ERROR([Cannot enable wide character support: $tre_wchar_reason]) - fi -fi - -if test "$tre_wchar" = "yes"; then - AC_DEFINE(TRE_WCHAR, 1, - [ Define to enable wide character (wchar_t) support. ]) - - dnl We make use of these if they exist. - AX_CHECK_FUNCS_COMP([wctype iswctype],,,[$tre_includes]) - AX_CHECK_FUNCS_COMP([iswascii iswblank],,,[$tre_includes]) -fi - -dnl Check for multibyte character set support -AC_ARG_ENABLE(multibyte, - AC_HELP_STRING( - [--disable-multibyte], - [disable multibyte character set support @<:@default=detect@:>@]), - [ tre_enable_multibyte="$enableval" ], - [ tre_enable_multibyte="detect" ]) - -dnl Wide character support is required for multibyte character set support -if test "$tre_wchar" != "yes"; then - if test "$tre_enable_multibyte" = "yes"; then - AC_MSG_ERROR([Cannot enable multibyte character support because wide \ -character support is not enabled ($tre_wchar_reason)]) - fi -fi - -if test "$tre_enable_multibyte" != "no"; then - if test "$tre_wchar" != "yes"; then - tre_multibyte="no (requires wide character support)" - else - found="no" - dnl We need either mbrtowc (preferred) or mbtowc - AX_CHECK_FUNCS_COMP([mbrtowc mbtowc],[found="yes"; break],,[$tre_includes]) - if test "$found" = "no"; then - tre_mbs_reason="no mbrtowc or mbtowc found" - tre_multibyte="no ($tre_mbs_reason)" - else - tre_multibyte="yes" - fi - fi -else - tre_multibyte="no (disabled with --disable-multibyte)" -fi - -# Fail if multibyte character set support was specifically requested but -# is not supported on this system. -if test "$tre_enable_multibyte" = "yes"; then - if test "$tre_multibyte" != "yes"; then - AC_MSG_ERROR([Cannot enable multibyte character set support: \ -$tre_mbs_reason]) - fi -fi - -if test "$tre_multibyte" = "yes"; then - AM_CONDITIONAL(TRE_MULTIBYTE, true) - AC_DEFINE(TRE_MULTIBYTE, 1, - [ Define to enable multibyte character set support. ]) -else - AM_CONDITIONAL(TRE_MULTIBYTE, false) -fi - -AC_SYS_LARGEFILE - -AM_GNU_GETTEXT([external]) -AC_LIBTOOL_TAGS([]) -AC_LIBTOOL_WIN32_DLL -AM_DISABLE_STATIC -AC_PROG_LIBTOOL - -dnl Output files -AC_CONFIG_HEADERS([config.h lib/tre-config.h]) -AC_CONFIG_FILES([ -Makefile -doc/Makefile -doc/agrep.1 -lib/Makefile -m4/Makefile -po/Makefile.in -src/Makefile -tests/Makefile -tests/agrep/Makefile -tre.pc -tre.spec -utils/Makefile -]) -AC_OUTPUT - - -dnl Print configuration summary - -cat < diff --git a/lib/stamp-h2 b/lib/stamp-h2 deleted file mode 100644 index c328f705cb548..0000000000000 --- a/lib/stamp-h2 +++ /dev/null @@ -1 +0,0 @@ -timestamp for lib/tre-config.h diff --git a/lib/tre-config.h b/lib/tre-config.h deleted file mode 100644 index bf2d596aeb4de..0000000000000 --- a/lib/tre-config.h +++ /dev/null @@ -1,44 +0,0 @@ -/* lib/tre-config.h. Generated from tre-config.h.in by configure. */ -/* tre-config.h.in. This file has all definitions that are needed in - `tre.h'. Note that this file must contain only the bare minimum - of definitions without the TRE_ prefix to avoid conflicts between - definitions here and definitions included from somewhere else. */ - -/* Define to 1 if you have the header file. */ -/* #undef HAVE_LIBUTF8_H */ - -/* Define to 1 if the system has the type `reg_errcode_t'. */ -/* #undef HAVE_REG_ERRCODE_T */ - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_TYPES_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_WCHAR_H 1 - -/* Define if you want to enable approximate matching functionality. */ -#define TRE_APPROX 1 - -/* Define to enable multibyte character set support. */ -#define TRE_MULTIBYTE 1 - -/* Define to the absolute path to the system tre.h */ -/* #undef TRE_SYSTEM_REGEX_H_PATH */ - -/* Define to include the system regex.h from tre.h */ -/* #undef TRE_USE_SYSTEM_REGEX_H */ - -/* Define to enable wide character (wchar_t) support. */ -#define TRE_WCHAR 1 - -/* TRE version string. */ -#define TRE_VERSION "0.8.0" - -/* TRE version level 1. */ -#define TRE_VERSION_1 0 - -/* TRE version level 2. */ -#define TRE_VERSION_2 8 - -/* TRE version level 3. */ -#define TRE_VERSION_3 0 diff --git a/libtool b/libtool deleted file mode 100755 index d7d790f71670b..0000000000000 --- a/libtool +++ /dev/null @@ -1,7317 +0,0 @@ -#! /bin/sh - -# libtoolT - Provide generalized library-building support services. -# Generated automatically by (GNU tre 0.8.0) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed program that does not truncate output. -SED="/usr/local/bin/gsed" - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="/usr/local/bin/gsed -e 1s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host server.mypc.hu: - -# Shell to use when invoking shell scripts. -SHELL="/bin/sh" - -# Whether or not to build shared libraries. -build_libtool_libs=yes - -# Whether or not to build static libraries. -build_old_libs=no - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=no - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=no - -# Whether or not to optimize for fast installation. -fast_install=needless - -# The host system. -host_alias= -host=x86_64-unknown-freebsd8.0 -host_os=freebsd8.0 - -# The build system. -build_alias= -build=x86_64-unknown-freebsd8.0 -build_os=freebsd8.0 - -# An echo program that does not interpret backslashes. -echo="echo" - -# The archiver. -AR="ar" -AR_FLAGS="cru" - -# A C compiler. -LTCC="gcc" - -# LTCC compiler flags. -LTCFLAGS="-g -O2 -Wall" - -# A language-specific compiler. -CC="gcc" - -# Is the compiler the GNU C compiler? -with_gcc=yes - -# An ERE matcher. -EGREP="/usr/bin/grep -E" - -# The linker used to build libraries. -LD="/usr/bin/ld" - -# Whether we need hard or soft links. -LN_S="ln -s" - -# A BSD-compatible nm program. -NM="/usr/bin/nm -B" - -# A symbol stripping program -STRIP="strip" - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=file - -# Used on cygwin: DLL creation program. -DLLTOOL="dlltool" - -# Used on cygwin: object dumper. -OBJDUMP="objdump" - -# Used on cygwin: assembler. -AS="as" - -# The name of the directory that contains temporary libtool files. -objdir=.libs - -# How to create reloadable object files. -reload_flag=" -r" -reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs" - -# How to pass a linker flag through the compiler. -wl="-Wl," - -# Object file suffix (normally "o"). -objext="o" - -# Old archive suffix (normally "a"). -libext="a" - -# Shared library suffix (normally ".so"). -shrext_cmds='.so' - -# Executable file suffix (normally ""). -exeext="" - -# Additional compiler flags for building library objects. -pic_flag=" -fPIC -DPIC" -pic_mode=default - -# What is the maximum length of a command? -max_cmd_len=196608 - -# Does compiler simultaneously support -c and -o options? -compiler_c_o="yes" - -# Must we lock files when doing compilation? -need_locks="no" - -# Do we need the lib prefix for modules? -need_lib_prefix=no - -# Do we need a version for libraries? -need_version=no - -# Whether dlopen is supported. -dlopen_support=unknown - -# Whether dlopen of programs is supported. -dlopen_self=unknown - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=unknown - -# Compiler flag to prevent dynamic linking. -link_static_flag="-static" - -# Compiler flag to turn off builtin functions. -no_builtin_flag=" -fno-builtin" - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec="\${wl}--export-dynamic" - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive" - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec="" - -# Library versioning type. -version_type=freebsd-elf - -# Format of library name prefix. -libname_spec="lib\$name" - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec="\${libname}\${release}\${shared_ext}\$versuffix \${libname}\${release}\${shared_ext} \$libname\${shared_ext}" - -# The coded name of the library, if different from the real name. -soname_spec="" - -# Commands used to build and install an old-style archive. -RANLIB="ranlib" -old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs~\$RANLIB \$oldlib" -old_postinstall_cmds="chmod 644 \$oldlib~\$RANLIB \$oldlib" -old_postuninstall_cmds="" - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds="" - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds="" - -# Commands used to build and install a shared archive. -archive_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib" -archive_expsym_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib" -postinstall_cmds="" -postuninstall_cmds="" - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds="" -module_expsym_cmds="" - -# Commands to strip libraries. -old_striplib="strip --strip-debug" -striplib="strip --strip-unneeded" - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects="" - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects="" - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps="" - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps="" - -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs="" - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path="" - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method="pass_all" - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd="\$MAGIC_CMD" - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag="" - -# Flag that forces no undefined symbols. -no_undefined_flag="" - -# Commands used to finish a libtool library installation in a directory. -finish_cmds="" - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval="" - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe="sed -n -e 's/^.*[ ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ ][ ]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p'" - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern int \\1;/p'" - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'" - -# This is the shared library runtime path variable. -runpath_var=LD_RUN_PATH - -# This is the shared library path variable. -shlibpath_var=LD_LIBRARY_PATH - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=yes - -# How to hardcode a shared library path into an executable. -hardcode_action=immediate - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=yes - -# Flag to hardcode $libdir into a binary during linking. -# This must work even if $libdir does not exist. -hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir" - -# If ld is used when linking, flag to hardcode $libdir into -# a binary during linking. This must work even if $libdir does -# not exist. -hardcode_libdir_flag_spec_ld="" - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator="" - -# Set to yes if using DIR/libNAME during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=no - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=no - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=unsupported - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=no - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=unknown - -# Compile-time system search path for libraries -sys_lib_search_path_spec="/usr/lib" - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec="/lib /usr/lib" - -# Fix the shell variable $srcfile for the compiler. -fix_srcfile_path="" - -# Set to yes if exported symbols are required. -always_export_symbols=no - -# The commands to list exported symbols. -export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | \$SED 's/.* //' | sort | uniq > \$export_symbols" - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds="" - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*" - -# Symbols that must always be exported. -include_expsyms="" - -# ### END LIBTOOL CONFIG - -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun configure. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -# 2007, 2008 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit , 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -basename="s,^.*/,,g" - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" - -# The name of this program: -progname=`echo "$progpath" | $SED $basename` -modename="$progname" - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 - -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION="1.5.26 Debian 1.5.26-1ubuntu1" -TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)" - -# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# Check that we have a working $echo. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$progpath" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE -fi - -# Global variables. -mode=$default_mode -nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= -execute_dlfiles= -duplicate_deps=no -preserve_args= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" -extracted_archives= -extracted_serial=0 - -##################################### -# Shell function definitions: -# This seems to be the best place for them - -# func_mktempdir [string] -# Make a temporary directory that won't clash with other running -# libtool processes, and avoids race conditions if possible. If -# given, STRING is the basename for that directory. -func_mktempdir () -{ - my_template="${TMPDIR-/tmp}/${1-$progname}" - - if test "$run" = ":"; then - # Return a directory name, but don't create it in dry-run mode - my_tmpdir="${my_template}-$$" - else - - # If mktemp works, use that first and foremost - my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` - - if test ! -d "$my_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" - - save_mktempdir_umask=`umask` - umask 0077 - $mkdir "$my_tmpdir" - umask $save_mktempdir_umask - fi - - # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || { - $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 - exit $EXIT_FAILURE - } - fi - - $echo "X$my_tmpdir" | $Xsed -} - - -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -func_win32_libid () -{ - win32_libid_type="unknown" - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ - $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then - win32_nmres=`eval $NM -f posix -A $1 | \ - $SED -n -e '1,100{ - / I /{ - s,.*,import, - p - q - } - }'` - case $win32_nmres in - import*) win32_libid_type="x86 archive import";; - *) win32_libid_type="x86 archive static";; - esac - fi - ;; - *DLL*) - win32_libid_type="x86 DLL" - ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" - ;; - esac - ;; - esac - $echo $win32_libid_type -} - - -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () -{ - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" - done - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. - *) - for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" - done - case "$@ " in - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - $echo "$modename: unable to infer tagged configuration" - $echo "$modename: specify a tag with \`--tag'" 1>&2 - exit $EXIT_FAILURE -# else -# $echo "$modename: using $tagname tagged configuration" - fi - ;; - esac - fi -} - - -# func_extract_an_archive dir oldlib -func_extract_an_archive () -{ - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" - - $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" - $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 - exit $EXIT_FAILURE - fi -} - -# func_extract_archives gentop oldlib ... -func_extract_archives () -{ - my_gentop="$1"; shift - my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" - my_status="" - - $show "${rm}r $my_gentop" - $run ${rm}r "$my_gentop" - $show "$mkdir $my_gentop" - $run $mkdir "$my_gentop" - my_status=$? - if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then - exit $my_status - fi - - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` - my_xlib_u=$my_xlib - while :; do - case " $extracted_archives " in - *" $my_xlib_u "*) - extracted_serial=`expr $extracted_serial + 1` - my_xlib_u=lt$extracted_serial-$my_xlib ;; - *) break ;; - esac - done - extracted_archives="$extracted_archives $my_xlib_u" - my_xdir="$my_gentop/$my_xlib_u" - - $show "${rm}r $my_xdir" - $run ${rm}r "$my_xdir" - $show "$mkdir $my_xdir" - $run $mkdir "$my_xdir" - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then - exit $exit_status - fi - case $host in - *-darwin*) - $show "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - if test -z "$run"; then - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` - darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` - if test -n "$darwin_arches"; then - darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - $show "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" - cd "$darwin_curdir" - $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" - done # $darwin_arches - ## Okay now we have a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` - lipo -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - ${rm}r unfat-$$ - cd "$darwin_orig_dir" - else - cd "$darwin_orig_dir" - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - fi # $run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - func_extract_archives_result="$my_oldobjs" -} -# End of Shell function definitions -##################################### - -# Darwin sucks -eval std_shrext=\"$shrext_cmds\" - -disable_libs=no - -# Parse our command line options once, thoroughly. -while test "$#" -gt 0 -do - arg="$1" - shift - - case $arg in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - execute_dlfiles) - execute_dlfiles="$execute_dlfiles $arg" - ;; - tag) - tagname="$arg" - preserve_args="${preserve_args}=$arg" - - # Check whether tagname contains only valid characters - case $tagname in - *[!-_A-Za-z0-9,/]*) - $echo "$progname: invalid tag name: $tagname" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - case $tagname in - CC) - # Don't test for the "default" C tag, as we know, it's there, but - # not specially marked. - ;; - *) - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then - taglist="$taglist $tagname" - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" - else - $echo "$progname: ignoring unknown tag $tagname" 1>&2 - fi - ;; - esac - ;; - *) - eval "$prev=\$arg" - ;; - esac - - prev= - prevopt= - continue - fi - - # Have we seen a non-optional argument yet? - case $arg in - --help) - show_help=yes - ;; - - --version) - echo "\ -$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP - -Copyright (C) 2008 Free Software Foundation, Inc. -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - exit $? - ;; - - --config) - ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath - # Now print the configurations for the tags. - for tagname in $taglist; do - ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" - done - exit $? - ;; - - --debug) - $echo "$progname: enabling shell trace mode" - set -x - preserve_args="$preserve_args $arg" - ;; - - --dry-run | -n) - run=: - ;; - - --features) - $echo "host: $host" - if test "$build_libtool_libs" = yes; then - $echo "enable shared libraries" - else - $echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - $echo "enable static libraries" - else - $echo "disable static libraries" - fi - exit $? - ;; - - --finish) mode="finish" ;; - - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; - - --preserve-dup-deps) duplicate_deps="yes" ;; - - --quiet | --silent) - show=: - preserve_args="$preserve_args $arg" - ;; - - --tag) - prevopt="--tag" - prev=tag - preserve_args="$preserve_args --tag" - ;; - --tag=*) - set tag "$optarg" ${1+"$@"} - shift - prev=tag - preserve_args="$preserve_args --tag" - ;; - - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles - ;; - - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - - *) - nonopt="$arg" - break - ;; - esac -done - -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE -fi - -case $disable_libs in -no) - ;; -shared) - build_libtool_libs=no - build_old_libs=yes - ;; -static) - build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` - ;; -esac - -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= - -if test -z "$show_help"; then - - # Infer the operation mode. - if test -z "$mode"; then - $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 - $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 - case $nonopt in - *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) - mode=link - for arg - do - case $arg in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx | *strace | *truss) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall - ;; - *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute - - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi - fi - ;; - esac - fi - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." - - # These modes are in order of execution frequency so that they run quickly. - case $mode in - # libtool compile mode - compile) - modename="$modename: compile" - # Get the compilation command and the source file. - base_compile= - srcfile="$nonopt" # always keep a non-empty value in "srcfile" - suppress_opt=yes - suppress_output= - arg_mode=normal - libobj= - later= - - for arg - do - case $arg_mode in - arg ) - # do not "continue". Instead, add this to base_compile - lastarg="$arg" - arg_mode=normal - ;; - - target ) - libobj="$arg" - arg_mode=normal - continue - ;; - - normal ) - # Accept any command-line options. - case $arg in - -o) - if test -n "$libobj" ; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit $EXIT_FAILURE - fi - arg_mode=target - continue - ;; - - -static | -prefer-pic | -prefer-non-pic) - later="$later $arg" - continue - ;; - - -no-suppress) - suppress_opt=no - continue - ;; - - -Xcompiler) - arg_mode=arg # the next one goes into the "base_compile" arg list - continue # The current "srcfile" will either be retained or - ;; # replaced later. I would guess that would be a bug. - - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` - lastarg= - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - lastarg="$lastarg $arg" - done - IFS="$save_ifs" - lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` - - # Add the arguments to base_compile. - base_compile="$base_compile $lastarg" - continue - ;; - - * ) - # Accept the current argument as the source file. - # The previous "srcfile" becomes the current argument. - # - lastarg="$srcfile" - srcfile="$arg" - ;; - esac # case $arg - ;; - esac # case $arg_mode - - # Aesthetically quote the previous argument. - lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - - case $lastarg in - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, and some SunOS ksh mistreat backslash-escaping - # in scan sets (worked around with variable expansion), - # and furthermore cannot handle '|' '&' '(' ')' in scan sets - # at all, so we specify them separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - lastarg="\"$lastarg\"" - ;; - esac - - base_compile="$base_compile $lastarg" - done # for arg - - case $arg_mode in - arg) - $echo "$modename: you must specify an argument for -Xcompile" - exit $EXIT_FAILURE - ;; - target) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit $EXIT_FAILURE - ;; - *) - # Get the name of the library object. - [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSifmso]' - case $libobj in - *.ada) xform=ada ;; - *.adb) xform=adb ;; - *.ads) xform=ads ;; - *.asm) xform=asm ;; - *.c++) xform=c++ ;; - *.cc) xform=cc ;; - *.ii) xform=ii ;; - *.class) xform=class ;; - *.cpp) xform=cpp ;; - *.cxx) xform=cxx ;; - *.[fF][09]?) xform=[fF][09]. ;; - *.for) xform=for ;; - *.java) xform=java ;; - *.obj) xform=obj ;; - *.sx) xform=sx ;; - esac - - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - - case $libobj in - *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; - *) - $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - func_infer_tag $base_compile - - for arg in $later; do - case $arg in - -static) - build_old_libs=yes - continue - ;; - - -prefer-pic) - pic_mode=yes - continue - ;; - - -prefer-non-pic) - pic_mode=no - continue - ;; - esac - done - - qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` - case $qlibobj in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qlibobj="\"$qlibobj\"" ;; - esac - test "X$libobj" != "X$qlibobj" \ - && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." - objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir= - else - xdir=$xdir/ - fi - lobj=${xdir}$objdir/$objname - - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - removelist="$obj $lobj $libobj ${libobj}T" - else - removelist="$lobj $libobj ${libobj}T" - fi - - $run $rm $removelist - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 - - # On Cygwin there's no "real" PIC flag so we must build both object types - case $host_os in - cygwin* | mingw* | pw32* | os2*) - pic_mode=default - ;; - esac - if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then - # non-PIC code in shared libraries is not supported - pic_mode=default - fi - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" - removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 - else - output_obj= - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then - until $run ln "$progpath" "$lockfile" 2>/dev/null; do - $show "Waiting for $lockfile to be removed" - sleep 2 - done - elif test "$need_locks" = warn; then - if test -f "$lockfile"; then - $echo "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit $EXIT_FAILURE - fi - $echo "$srcfile" > "$lockfile" - fi - - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" - fi - qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` - case $qsrcfile in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qsrcfile="\"$qsrcfile\"" ;; - esac - - $run $rm "$libobj" "${libobj}T" - - # Create a libtool object file (analogous to a ".la" file), - # but don't create it if we're doing a dry run. - test -z "$run" && cat > ${libobj}T </dev/null`" != "X$srcfile"; then - $echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - $show "$mv $output_obj $lobj" - if $run $mv $output_obj $lobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Append the name of the PIC object to the libtool object file. - test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != "X$srcfile"; then - $echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed - if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - $show "$mv $output_obj $obj" - if $run $mv $output_obj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Append the name of the non-PIC object the libtool object file. - # Only append if the libtool object file exists. - test -z "$run" && cat >> ${libobj}T <> ${libobj}T <&2 - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - -static) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=built - ;; - -static-libtool-libs) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - esac - build_libtool_libs=no - build_old_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do - arg="$1" - shift - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test - ;; - *) qarg=$arg ;; - esac - libtool_args="$libtool_args $qarg" - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" - ;; - esac - - case $prev in - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" - preload=yes - fi - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test "$dlself" = no; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - else - dlprefiles="$dlprefiles $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols="$arg" - if test ! -f "$arg"; then - $echo "$modename: symbol file \`$arg' does not exist" - exit $EXIT_FAILURE - fi - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - inst_prefix) - inst_prefix_dir="$arg" - prev= - continue - ;; - precious_regex) - precious_files_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat $save_arg` - do -# moreargs="$moreargs $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= - - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE - fi - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE - else - # Dry-run case. - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - fi - done - else - $echo "$modename: link input file \`$save_arg' does not exist" - exit $EXIT_FAILURE - fi - arg=$save_arg - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE - ;; - esac - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; - *) rpath="$rpath $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; - esac - fi - prev= - continue - ;; - xcompiler) - compiler_flags="$compiler_flags $qarg" - prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" - continue - ;; - xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" - prev= - compile_command="$compile_command $wl$qarg" - finalize_command="$finalize_command $wl$qarg" - continue - ;; - xcclinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $qarg" - prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" - continue - ;; - shrext) - shrext_cmds="$arg" - prev= - continue - ;; - darwin_framework|darwin_framework_skip) - test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - prev= - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n "$prev" - - prevarg="$arg" - - case $arg in - -all-static) - if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: more than one -exported-symbols argument is not allowed" - exit $EXIT_FAILURE - fi - if test "X$arg" = "X-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - -framework|-arch|-isysroot) - case " $CC " in - *" ${arg} ${1} "* | *" ${arg} ${1} "*) - prev=darwin_framework_skip ;; - *) compiler_flags="$compiler_flags $arg" - prev=darwin_framework ;; - esac - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - continue - ;; - - -inst-prefix-dir) - prev=inst_prefix - continue - ;; - - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - ;; - esac - continue - ;; - - -L*) - dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - absdir="$dir" - notinst_path="$notinst_path $dir" - fi - dir="$absdir" - ;; - esac - case "$deplibs " in - *" -L$dir "*) ;; - *) - deplibs="$deplibs -L$dir" - lib_search_path="$lib_search_path $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$dir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - *) dllsearchpath="$dllsearchpath:$testbindir";; - esac - ;; - esac - continue - ;; - - -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-os2*) - # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs -framework System" - continue - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - test "X$arg" = "X-lc" && continue - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - test "X$arg" = "X-lc" && continue - ;; - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - deplibs="$deplibs $arg" - continue - ;; - - # Tru64 UNIX uses -model [arg] to determine the layout of C++ - # classes, name mangling, and exception handling. - -model) - compile_command="$compile_command $arg" - compiler_flags="$compiler_flags $arg" - finalize_command="$finalize_command $arg" - prev=xcompiler - continue - ;; - - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) - compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - continue - ;; - - -multi_module) - single_module="${wl}-multi_module" - continue - ;; - - -module) - module=yes - continue - ;; - - # -64, -mips[0-9] enable 64-bit mode on the SGI compiler - # -r[0-9][0-9]* specifies the processor on the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler - # +DA*, +DD* enable 64-bit mode on the HP compiler - # -q* pass through compiler args for the IBM compiler - # -m* pass through architecture-specific compiler args for GCC - # -m*, -t[45]*, -txscale* pass through architecture-specific - # compiler args for GCC - # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC - # -F/path gives path to uninstalled frameworks, gcc on darwin - # @file GCC response files - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) - - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - compiler_flags="$compiler_flags $arg" - continue - ;; - - -shrext) - prev=shrext - continue - ;; - - -no-fast-install) - fast_install=no - continue - ;; - - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) - # The PATH hackery in wrapper scripts is required on Windows - # and Darwin in order for the loader to find any dlls it needs. - $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 - $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -objectlist) - prev=objectlist - continue - ;; - - -o) prev=output ;; - - -precious-files-regex) - prev=precious_regex - continue - ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - continue - ;; - - -static | -static-libtool-libs) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - -version-number) - prev=vinfo - vinfo_number=yes - continue - ;; - - -Wc,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $flag" - done - IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` - ;; - - -Wl,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $wl$flag" - linker_flags="$linker_flags $flag" - done - IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Xlinker) - prev=xlinker - continue - ;; - - -XCClinker) - prev=xcclinker - continue - ;; - - # Some other compiler flag. - -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - ;; - - *.$objext) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= - - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE - fi - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE - else - # Dry-run case. - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - fi - ;; - - *.$libext) - # An archive. - deplibs="$deplibs $arg" - old_deplibs="$old_deplibs $arg" - continue - ;; - - *.la) - # A libtool-controlled library. - - if test "$prev" = dlfiles; then - # This library was specified with -dlopen. - dlfiles="$dlfiles $arg" - prev= - elif test "$prev" = dlprefiles; then - # The library was specified with -dlpreopen. - dlprefiles="$dlprefiles $arg" - prev= - else - deplibs="$deplibs $arg" - fi - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - ;; - esac # arg - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - done # argument parsing loop - - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` - libobjs_save="$libobjs" - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` - else - shlib_search_path= - fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - # Create the object directory. - if test ! -d "$output_objdir"; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then - exit $exit_status - fi - fi - - # Determine the type of output - case $output in - "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac - - case $host in - *cygwin* | *mingw* | *pw32*) - # don't eliminate duplications in $postdeps and $predeps - duplicate_compiler_generated_deps=yes - ;; - *) - duplicate_compiler_generated_deps=$duplicate_deps - ;; - esac - specialdeplibs= - - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if test "X$duplicate_deps" = "Xyes" ; then - case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - libs="$libs $deplib" - done - - if test "$linkmode" = lib; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" - - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; - esac - pre_post_deps="$pre_post_deps $pre_post_dep" - done - fi - pre_post_deps= - fi - - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - case $linkmode in - lib) - passes="conv link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit $EXIT_FAILURE - ;; - esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=no - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - for pass in $passes; do - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" - deplibs= - fi - if test "$linkmode" = prog; then - case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; - link) - libs="$deplibs %DEPLIBS%" - test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" - ;; - esac - fi - if test "$pass" = dlopen; then - # Collect dlpreopened libraries - save_deplibs="$deplibs" - deplibs= - fi - for deplib in $libs; do - lib= - found=no - case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - compiler_flags="$compiler_flags $deplib" - fi - continue - ;; - -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 - continue - fi - name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` - if test "$linkmode" = lib; then - searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" - else - searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" - fi - for searchdir in $searchdirs; do - for search_ext in .la $std_shrext .so .a; do - # Search the libtool library - lib="$searchdir/lib${name}${search_ext}" - if test -f "$lib"; then - if test "$search_ext" = ".la"; then - found=yes - else - found=no - fi - break 2 - fi - done - done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - else # deplib is a libtool library - # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, - # We need to do some special things here, and not later. - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $deplib "*) - if (${SED} -e '2q' $lib | - grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - library_names= - old_library= - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - for l in $old_library $library_names; do - ll="$l" - done - if test "X$ll" = "X$old_library" ; then # only static version available - found=no - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." - lib=$ladir/$old_library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - fi - ;; - *) ;; - esac - fi - fi - ;; # -l - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test "$pass" = conv && continue - newdependency_libs="$deplib $newdependency_libs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` - ;; - prog) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - if test "$pass" = scan; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` - ;; - *) - $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test "$pass" = link; then - dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; - *.la) lib="$deplib" ;; - *.$libext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - valid_a_lib=no - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - if eval $echo \"$deplib\" 2>/dev/null \ - | $SED 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi - ;; - pass_all) - valid_a_lib=yes - ;; - esac - if test "$valid_a_lib" != yes; then - $echo - $echo "*** Warning: Trying to link with static lib archive $deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because the file extensions .$libext of this argument makes me believe" - $echo "*** that it is just a static archive that I should not used here." - else - $echo - $echo "*** Warning: Linking the shared library $output against the" - $echo "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi - continue - ;; - prog) - if test "$pass" != link; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" - fi - fi - continue - ;; - %DEPLIBS%) - alldeplibs=yes - continue - ;; - esac # case $deplib - if test "$found" = yes || test -f "$lib"; then : - else - $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 - exit $EXIT_FAILURE - fi - - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." - - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - # If the library was installed with an old release of libtool, - # it will not redefine variables installed, or shouldnotlink - installed=yes - shouldnotlink=no - avoidtemprpath= - - - # Read the .la file - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && dlfiles="$dlfiles $dlopen" - test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" - fi - - if test "$pass" = conv; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - if test -z "$libdir"; then - if test -z "$old_library"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $ladir/$objdir/$old_library" - old_convenience="$old_convenience $ladir/$objdir/$old_library" - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - elif test "$linkmode" != prog && test "$linkmode" != lib; then - $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit $EXIT_FAILURE - fi - continue - fi # $pass = conv - - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi - - # This library was specified with -dlopen. - if test "$pass" = dlopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi - if test -z "$dlname" || - test "$dlopen_support" != yes || - test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - dlprefiles="$dlprefiles $lib $dependency_libs" - else - newdlfiles="$newdlfiles $lib" - fi - continue - fi # $pass = dlopen - - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - abs_ladir="$ladir" - fi - ;; - esac - laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - - # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then - if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - $echo "$modename: warning: library \`$lib' was moved." 1>&2 - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" - else - dir="$libdir" - absdir="$libdir" - fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes - else - if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir="$ladir" - absdir="$abs_ladir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - fi - fi # $installed = yes - name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - - # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - newdlprefiles="$newdlprefiles $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - newdlprefiles="$newdlprefiles $dir/$dlname" - else - newdlprefiles="$newdlprefiles $dir/$linklib" - fi - fi # $pass = dlpreopen - - if test -z "$libdir"; then - # Link the convenience library - if test "$linkmode" = lib; then - deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" # used for prog,scan pass - fi - continue - fi - - - if test "$linkmode" = prog && test "$pass" != link; then - newlib_search_path="$newlib_search_path $ladir" - deplibs="$lib $deplibs" - - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes - fi - - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test - esac - # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done # for deplib - continue - fi # $linkmode = prog... - - if test "$linkmode,$pass" = "prog,link"; then - if test -n "$library_names" && - { { test "$prefer_static_libs" = no || - test "$prefer_static_libs,$installed" = "built,yes"; } || - test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $absdir" ;; - esac - fi - - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi # $linkmode,$pass = prog,link... - - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - fi - - link_static=no # Whether the deplib will be linked statically - use_static_libs=$prefer_static_libs - if test "$use_static_libs" = built && test "$installed" = yes ; then - use_static_libs=no - fi - if test -n "$library_names" && - { test "$use_static_libs" = no || test -z "$old_library"; }; then - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes - fi - # This is a shared library - - # Warn about portability, can't link against -module's on - # some systems (darwin) - if test "$shouldnotlink" = yes && test "$pass" = link ; then - $echo - if test "$linkmode" = prog; then - $echo "*** Warning: Linking the executable $output against the loadable module" - else - $echo "*** Warning: Linking the shared library $output against the loadable module" - fi - $echo "*** $linklib is not portable!" - fi - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi - - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - realname="$2" - shift; shift - libname=`eval \\$echo \"$libname_spec\"` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname="$dlname" - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin* | mingw*) - major=`expr $current - $age` - versuffix="-$major" - ;; - esac - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - - # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" - soname=`$echo $soroot | ${SED} -e 's/^.*\///'` - newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" - - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - $show "extracting exported symbol list from \`$soname'" - save_ifs="$IFS"; IFS='~' - cmds=$extract_expsyms_cmds - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - $show "generating import library for \`$soname'" - save_ifs="$IFS"; IFS='~' - cmds=$old_archive_from_expsyms_cmds - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" - - if test "$linkmode" = prog || test "$mode" != relink; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" - case $host in - *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; - *-*-sysv4*uw2*) add_dir="-L$dir" ;; - *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ - *-*-unixware7*) add_dir="-L$dir" ;; - *-*-darwin* ) - # if the lib is a module then we can not link against - # it, someone is ignoring the new warnings I added - if /usr/bin/file -L $add 2> /dev/null | - $EGREP ": [^:]* bundle" >/dev/null ; then - $echo "** Warning, lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then - $echo - $echo "** And there doesn't seem to be a static archive available" - $echo "** The link will probably fail, sorry" - else - add="$dir/$old_library" - fi - fi - esac - elif test "$hardcode_minus_L" = no; then - case $host in - *-*-sunos*) add_shlibpath="$dir" ;; - esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - relink) - if test "$hardcode_direct" = yes; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$dir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac - - if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit $EXIT_FAILURE - fi - - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; - esac - fi - if test "$linkmode" = prog; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && \ - test "$hardcode_minus_L" != yes && \ - test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - fi - fi - fi - - if test "$linkmode" = prog || test "$mode" = relink; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - add="-l$name" - elif test "$hardcode_automatic" = yes; then - if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" - else - add="$libdir/$linklib" - fi - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - fi - - if test "$linkmode" = prog; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test "$linkmode" = prog; then - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test "$build_libtool_libs" = yes; then - # Not a shared library - if test "$deplibs_check_method" != pass_all; then - # We're trying link a shared library against a static one - # but the system doesn't support it. - - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - $echo - $echo "*** Warning: This system can not link to static lib archive $lib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then - $echo "*** But as you try to build a module library, libtool will still create " - $echo "*** a static module, that should work as long as the dlopening application" - $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - $echo - $echo "*** However, this would only work if libtool was able to extract symbol" - $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - $echo "*** not find such a program. So, this module is probably useless." - $echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - else - deplibs="$dir/$old_library $deplibs" - link_static=yes - fi - fi # link shared/static library? - - if test "$linkmode" = lib; then - if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || - test "$build_old_libs" = yes || - test "$link_static" = yes; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - *) temp_deplibs="$temp_deplibs $libdir";; - esac - done - dependency_libs="$temp_deplibs" - fi - - newlib_search_path="$newlib_search_path $absdir" - # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - - if test "$link_all_deplibs" != no; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - case $deplib in - -L*) path="$deplib" ;; - *.la) - dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$deplib" && dir="." - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - absdir="$dir" - fi - ;; - esac - if grep "^installed=no" $deplib > /dev/null; then - path="$absdir/$objdir" - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - if test "$absdir" != "$libdir"; then - $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 - fi - path="$absdir" - fi - depdepl= - case $host in - *-*-darwin*) - # we do not want to link against static libs, - # but need to link against shared - eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names" ; then - for tmp in $deplibrary_names ; do - depdepl=$tmp - done - if test -f "$deplibdir/$depdepl" ; then - depdepl="$deplibdir/$depdepl" - elif test -f "$path/$depdepl" ; then - depdepl="$path/$depdepl" - else - # Can't find it, oh well... - depdepl= - fi - # do not add paths which are already there - case " $newlib_search_path " in - *" $path "*) ;; - *) newlib_search_path="$newlib_search_path $path";; - esac - fi - path="" - ;; - *) - path="-L$path" - ;; - esac - ;; - -l*) - case $host in - *-*-darwin*) - # Again, we only want to link against shared libraries - eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` - for tmp in $newlib_search_path ; do - if test -f "$tmp/lib$tmp_libs.dylib" ; then - eval depdepl="$tmp/lib$tmp_libs.dylib" - break - fi - done - path="" - ;; - *) continue ;; - esac - ;; - *) continue ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$path $deplibs" ;; - esac - case " $deplibs " in - *" $depdepl "*) ;; - *) deplibs="$depdepl $deplibs" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir" ;; - esac - done - newlib_search_path= - fi - - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else - vars="compile_deplibs finalize_deplibs" - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - -R*) ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - # Last step: remove runtime libs from dependency_libs - # (they stay in deplibs) - tmp_libs= - for i in $dependency_libs ; do - case " $predeps $postdeps $compiler_lib_search_path " in - *" $i "*) - i="" - ;; - esac - if test -n "$i" ; then - tmp_libs="$tmp_libs $i" - fi - done - dependency_libs=$tmp_libs - done # for pass - if test "$linkmode" = prog; then - dlfiles="$newdlfiles" - dlprefiles="$newdlprefiles" - fi - - case $linkmode in - oldlib) - case " $deplibs" in - *\ -l* | *\ -L*) - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;; - esac - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 - fi - - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 - fi - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - objs="$objs$old_deplibs" - ;; - - lib) - # Make sure we only generate libraries of the form `libNAME.la'. - case $outputname in - lib*) - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - ;; - *) - if test "$module" = no; then - $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - else - libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - fi - ;; - esac - - if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit $EXIT_FAILURE - else - $echo - $echo "*** Warning: Linking the shared library $output against the non-libtool" - $echo "*** objects $objs is not portable!" - libobjs="$libobjs $objs" - fi - fi - - if test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 - fi - - set dummy $rpath - if test "$#" -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" - - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so - # convenience libraries should have the same extension an - # archive normally would. - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 - fi - else - - # Parse the version information argument. - save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - IFS="$save_ifs" - - if test -n "$8"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # convert absolute version numbers to libtool ages - # this retains compatibility with .la files and attempts - # to make the code below a bit more comprehensible - - case $vinfo_number in - yes) - number_major="$2" - number_minor="$3" - number_revision="$4" - # - # There are really only two kinds -- those that - # use the current revision as the major version - # and those that subtract age and use age as - # a minor version. But, then there is irix - # which has an extra 1 added just for fun - # - case $version_type in - darwin|linux|osf|windows|none) - current=`expr $number_major + $number_minor` - age="$number_minor" - revision="$number_revision" - ;; - freebsd-aout|freebsd-elf|sunos) - current="$number_major" - revision="$number_minor" - age="0" - ;; - irix|nonstopux) - current=`expr $number_major + $number_minor` - age="$number_minor" - revision="$number_minor" - lt_irix_increment=no - ;; - *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE - ;; - esac - ;; - no) - current="$2" - revision="$3" - age="$4" - ;; - esac - - # Check that each of the things are valid numbers. - case $current in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - case $revision in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - case $age in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - if test "$age" -gt "$current"; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; - - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - # Darwin ld doesn't like 0 for these options... - minor_current=`expr $current + 1` - xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - ;; - - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current"; - ;; - - irix | nonstopux) - if test "X$lt_irix_increment" = "Xno"; then - major=`expr $current - $age` - else - major=`expr $current - $age + 1` - fi - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring="$verstring_prefix$major.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test "$loop" -ne 0; do - iface=`expr $revision - $loop` - loop=`expr $loop - 1` - verstring="$verstring_prefix$major.$iface:$verstring" - done - - # Before this point, $major must not contain `.'. - major=.$major - versuffix="$major.$revision" - ;; - - linux) - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - ;; - - osf) - major=.`expr $current - $age` - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$age - while test "$loop" -ne 0; do - iface=`expr $current - $loop` - loop=`expr $loop - 1` - verstring="$verstring:${iface}.0" - done - - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; - - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; - - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. - major=`expr $current - $age` - versuffix="-$major" - ;; - - *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring= - ;; - *) - verstring="0.0" - ;; - esac - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi - - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi - - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - fi - - if test "$mode" != relink; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`$echo "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - if test "X$precious_files_regex" != "X"; then - if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then - continue - fi - fi - removelist="$removelist $p" - ;; - *) ;; - esac - done - if test -n "$removelist"; then - $show "${rm}r $removelist" - $run ${rm}r $removelist - fi - fi - - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi - - # Eliminate all temporary directories. - #for path in $notinst_path; do - # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` - # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` - # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` - #done - - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then - dependency_libs="$temp_xrpath $dependency_libs" - fi - fi - - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) dlfiles="$dlfiles $lib" ;; - esac - done - - # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) dlprefiles="$dlprefiles $lib" ;; - esac - done - - if test "$build_libtool_libs" = yes; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - deplibs="$deplibs -framework System" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then - deplibs="$deplibs -lc" - fi - ;; - esac - fi - - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behavior. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $rm conftest.c - cat > conftest.c </dev/null` - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null \ - | grep " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | ${SED} 10q \ - | $EGREP "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - $echo - $echo "*** Warning: linker path does not have real file for library $a_deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $echo "*** with $libname but no candidates were found. (...for file magic test)" - else - $echo "*** with $libname and none of the candidates passed a file format test" - $echo "*** using a file magic. Last file checked: $potlib" - fi - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - for a_deplib in $deplibs; do - name=`expr $a_deplib : '-l\(.*\)'` - # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - ;; - esac - fi - if test -n "$a_deplib" ; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test - if eval $echo \"$potent_lib\" 2>/dev/null \ - | ${SED} 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - $echo - $echo "*** Warning: linker path does not have real file for library $a_deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $echo "*** with $libname but no candidates were found. (...for regex pattern test)" - else - $echo "*** with $libname and none of the candidates passed a file format test" - $echo "*** using a regex pattern. Last file checked: $potlib" - fi - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs="" - tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g'` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - for i in $predeps $postdeps ; do - # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` - done - fi - if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ - | grep . >/dev/null; then - $echo - if test "X$deplibs_check_method" = "Xnone"; then - $echo "*** Warning: inter-library dependencies are not supported in this platform." - else - $echo "*** Warning: inter-library dependencies are not known to be supported." - fi - $echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - fi - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` - ;; - esac - - if test "$droppeddeps" = yes; then - if test "$module" = yes; then - $echo - $echo "*** Warning: libtool could not satisfy all declared inter-library" - $echo "*** dependencies of module $libname. Therefore, libtool will create" - $echo "*** a static module, that should work as long as the dlopening" - $echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - $echo - $echo "*** However, this would only work if libtool was able to extract symbol" - $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - $echo "*** not find such a program. So, this module is probably useless." - $echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - $echo "*** The inter-library dependencies that have been dropped here will be" - $echo "*** automatically added whenever a program is linked with this library" - $echo "*** or is declared to -dlopen it." - - if test "$allow_undefined" = no; then - $echo - $echo "*** Since this library must not contain undefined symbols," - $echo "*** because either the platform does not support them or" - $echo "*** it was explicitly requested with -no-undefined," - $echo "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $deplibs " in - *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; - esac - ;; - *) new_libs="$new_libs $deplib" ;; - esac - done - deplibs="$new_libs" - - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - if test "$hardcode_into_libs" = yes; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath="$finalize_rpath" - test "$mode" != relink && rpath="$compile_rpath$rpath" - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - dep_rpath="$dep_rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - if test -n "$hardcode_libdir_flag_spec_ld"; then - case $archive_cmds in - *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;; - *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;; - esac - else - eval dep_rpath=\"$hardcode_libdir_flag_spec\" - fi - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi - test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" - fi - - shlibpath="$finalize_shlibpath" - test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi - - # Get the real and link names of the library. - eval shared_ext=\"$shrext_cmds\" - eval library_names=\"$library_names_spec\" - set dummy $library_names - realname="$2" - shift; shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - if test -z "$dlname"; then - dlname=$soname - fi - - lib="$output_objdir/$realname" - linknames= - for link - do - linknames="$linknames $link" - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - cmds=$export_symbols_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - if len=`expr "X$cmd" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - $show "$cmd" - $run eval "$cmd" || exit $? - skipped_export=false - else - # The command line is too long to execute in one step. - $show "using reloadable object file for export list..." - skipped_export=: - # Break out early, otherwise skipped_export may be - # set to false by a later but shorter cmd. - break - fi - done - IFS="$save_ifs" - if test -n "$export_symbols_regex"; then - $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - $show "$mv \"${export_symbols}T\" \"$export_symbols\"" - $run eval '$mv "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' - fi - - tmp_deplibs= - for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - tmp_deplibs="$tmp_deplibs $test_deplib" - ;; - esac - done - deplibs="$tmp_deplibs" - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $convenience - libobjs="$libobjs $func_extract_archives_result" - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - linker_flags="$linker_flags $flag" - fi - - # Make a backup of the uninstalled library when relinking - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? - fi - - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - eval test_cmds=\"$module_expsym_cmds\" - cmds=$module_expsym_cmds - else - eval test_cmds=\"$module_cmds\" - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds - fi - fi - - if test "X$skipped_export" != "X:" && - len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise. - $echo "creating reloadable object files..." - - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - output_la=`$echo "X$output" | $Xsed -e "$basename"` - - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - delfiles= - last_robj= - k=1 - output=$output_objdir/$output_la-${k}.$objext - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - eval test_cmds=\"$reload_cmds $objlist $last_robj\" - if test "X$objlist" = X || - { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len"; }; then - objlist="$objlist $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" - fi - last_robj=$output_objdir/$output_la-${k}.$objext - k=`expr $k + 1` - output=$output_objdir/$output_la-${k}.$objext - objlist=$obj - len=1 - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" - - if ${skipped_export-false}; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - libobjs=$output - # Append the command to create the export file. - eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" - fi - - # Set up a command to remove the reloadable object files - # after they are used. - i=0 - while test "$i" -lt "$k" - do - i=`expr $i + 1` - delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" - done - - $echo "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - libobjs=$output - # Restore the value of output. - output=$save_output - - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. - - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - cmds=$module_expsym_cmds - else - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds - fi - fi - - # Append the command to remove the reloadable object files - # to the just-reset $cmds. - eval cmds=\"\$cmds~\$rm $delfiles\" - fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' - fi - - exit $lt_exit - } - done - IFS="$save_ifs" - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? - - if test -n "$convenience"; then - if test -z "$whole_archive_flag_spec"; then - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - fi - fi - - exit $EXIT_SUCCESS - fi - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - ;; - - obj) - case " $deplibs" in - *\ -l* | *\ -L*) - $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;; - esac - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 - fi - - case $output in - *.lo) - if test -n "$objs$old_deplibs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit $EXIT_FAILURE - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e "$lo2o"` - ;; - *) - libobj= - obj="$output" - ;; - esac - - # Delete the old objects. - $run $rm $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec and hope we can get by with - # turning comma into space.. - wl= - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` - else - gentop="$output_objdir/${obj}x" - generated="$generated $gentop" - - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" - fi - fi - - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - - output="$obj" - cmds=$reload_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - exit $EXIT_SUCCESS - fi - - if test "$build_libtool_libs" != yes; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $run eval "echo timestamp > $libobj" || exit $? - exit $EXIT_SUCCESS - fi - - if test -n "$pic_flag" || test "$pic_mode" != default; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output="$libobj" - cmds=$reload_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - exit $EXIT_SUCCESS - ;; - - prog) - case $host in - *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; - esac - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 - fi - - if test "$preload" = yes; then - if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && - test "$dlopen_self_static" = unknown; then - $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi - fi - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - ;; - esac - - case $host in - *darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - if test "$tagname" = CXX ; then - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" - fi - ;; - esac - - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $compile_deplibs " in - *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $compile_deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; - esac - ;; - *) new_libs="$new_libs $deplib" ;; - esac - done - compile_deplibs="$new_libs" - - - compile_command="$compile_command $compile_deplibs" - finalize_command="$finalize_command $finalize_deplibs" - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$libdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$libdir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - *) dllsearchpath="$dllsearchpath:$testbindir";; - esac - ;; - esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - fi - - dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${outputname}S.c" - else - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - fi - fi - - if test -n "$dlsyms"; then - case $dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${outputname}.nm" - - $show "$rm $nlist ${nlist}S ${nlist}T" - $run $rm "$nlist" "${nlist}S" "${nlist}T" - - # Parse the name list into a source file. - $show "creating $output_objdir/$dlsyms" - - test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* Prevent the only kind of declaration conflicts we can make. */ -#define lt_preloaded_symbols some_other_symbol - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - $show "generating symbol list for \`$output'" - - test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for arg in $progfiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - if test -n "$export_symbols_regex"; then - $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" - $run $rm $export_symbols - $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - case $host in - *cygwin* | *mingw* ) - $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' - ;; - esac - else - $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - $run eval 'mv "$nlist"T "$nlist"' - case $host in - *cygwin* | *mingw* ) - $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; - esac - fi - fi - - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` - $run eval '$echo ": $name " >> "$nlist"' - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -z "$run"; then - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $mv "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | - if sort -k 3 /dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - grep -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' - else - $echo '/* NONE */' >> "$output_objdir/$dlsyms" - fi - - $echo >> "$output_objdir/$dlsyms" "\ - -#undef lt_preloaded_symbols - -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -" - - case $host in - *cygwin* | *mingw* ) - $echo >> "$output_objdir/$dlsyms" "\ -/* DATA imports from DLLs on WIN32 can't be const, because - runtime relocations are performed -- see ld's documentation - on pseudo-relocs */ -struct { -" - ;; - * ) - $echo >> "$output_objdir/$dlsyms" "\ -const struct { -" - ;; - esac - - - $echo >> "$output_objdir/$dlsyms" "\ - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = -{\ -" - - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" - - $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - fi - - pic_flag_for_symtable= - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; - esac;; - *-*-hpux*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag";; - esac - esac - - # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - - # Clean up the generated files. - $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" - $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" - - # Transform the symbol file into the correct name. - case $host in - *cygwin* | *mingw* ) - if test -f "$output_objdir/${outputname}.def" ; then - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` - else - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` - fi - ;; - * ) - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` - ;; - esac - ;; - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit $EXIT_FAILURE - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` - fi - - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - $show "$link_command" - $run eval "$link_command" - exit_status=$? - - # Delete the generated files. - if test -n "$dlsyms"; then - $show "$rm $output_objdir/${outputname}S.${objext}" - $run $rm "$output_objdir/${outputname}S.${objext}" - fi - - exit $exit_status - fi - - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) - # Absolute path. - rpath="$rpath$dir:" - ;; - *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" - ;; - esac - done - temp_rpath="$rpath" - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$no_install" = yes; then - # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $run $rm $output - # Link the executable and exit - $show "$link_command" - $run eval "$link_command" || exit $? - exit $EXIT_SUCCESS - fi - - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 - $echo "$modename: \`$output' will be relinked during installation" 1>&2 - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi - - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname - - $show "$link_command" - $run eval "$link_command" || exit $? - - # Now create the wrapper script. - $show "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" - fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` - fi - - # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then - case $progpath in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; - *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; - esac - qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` - fi - - # Only actually do things if our run command is non-null. - if test -z "$run"; then - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) - exeext=.exe - outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; - *) exeext= ;; - esac - case $host in - *cygwin* | *mingw* ) - output_name=`basename $output` - output_path=`dirname $output` - cwrappersource="$output_path/$objdir/lt-$output_name.c" - cwrapper="$output_path/$output_name.exe" - $rm $cwrappersource $cwrapper - trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - cat > $cwrappersource <> $cwrappersource<<"EOF" -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(PATH_MAX) -# define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef DIR_SEPARATOR -# define DIR_SEPARATOR '/' -# define PATH_SEPARATOR ':' -#endif - -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) -# define HAVE_DOS_BASED_FILE_SYSTEM -# ifndef DIR_SEPARATOR_2 -# define DIR_SEPARATOR_2 '\\' -# endif -# ifndef PATH_SEPARATOR_2 -# define PATH_SEPARATOR_2 ';' -# endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#ifndef PATH_SEPARATOR_2 -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -#else /* PATH_SEPARATOR_2 */ -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -#endif /* PATH_SEPARATOR_2 */ - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ -} while (0) - -/* -DDEBUG is fairly common in CFLAGS. */ -#undef DEBUG -#if defined DEBUGWRAPPER -# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) -#else -# define DEBUG(format, ...) -#endif - -const char *program_name = NULL; - -void * xmalloc (size_t num); -char * xstrdup (const char *string); -const char * base_name (const char *name); -char * find_executable(const char *wrapper); -int check_executable(const char *path); -char * strendzap(char *str, const char *pat); -void lt_fatal (const char *message, ...); - -int -main (int argc, char *argv[]) -{ - char **newargz; - int i; - - program_name = (char *) xstrdup (base_name (argv[0])); - DEBUG("(main) argv[0] : %s\n",argv[0]); - DEBUG("(main) program_name : %s\n",program_name); - newargz = XMALLOC(char *, argc+2); -EOF - - cat >> $cwrappersource <> $cwrappersource <<"EOF" - newargz[1] = find_executable(argv[0]); - if (newargz[1] == NULL) - lt_fatal("Couldn't find %s", argv[0]); - DEBUG("(main) found exe at : %s\n",newargz[1]); - /* we know the script has the same name, without the .exe */ - /* so make sure newargz[1] doesn't end in .exe */ - strendzap(newargz[1],".exe"); - for (i = 1; i < argc; i++) - newargz[i+1] = xstrdup(argv[i]); - newargz[argc+1] = NULL; - - for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" - return 127; -} - -void * -xmalloc (size_t num) -{ - void * p = (void *) malloc (num); - if (!p) - lt_fatal ("Memory exhausted"); - - return p; -} - -char * -xstrdup (const char *string) -{ - return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL -; -} - -const char * -base_name (const char *name) -{ - const char *base; - -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - /* Skip over the disk name in MSDOS pathnames. */ - if (isalpha ((unsigned char)name[0]) && name[1] == ':') - name += 2; -#endif - - for (base = name; *name; name++) - if (IS_DIR_SEPARATOR (*name)) - base = name + 1; - return base; -} - -int -check_executable(const char * path) -{ - struct stat st; - - DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); - if ((!path) || (!*path)) - return 0; - - if ((stat (path, &st) >= 0) && - ( - /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ -#if defined (S_IXOTH) - ((st.st_mode & S_IXOTH) == S_IXOTH) || -#endif -#if defined (S_IXGRP) - ((st.st_mode & S_IXGRP) == S_IXGRP) || -#endif - ((st.st_mode & S_IXUSR) == S_IXUSR)) - ) - return 1; - else - return 0; -} - -/* Searches for the full path of the wrapper. Returns - newly allocated full path name if found, NULL otherwise */ -char * -find_executable (const char* wrapper) -{ - int has_slash = 0; - const char* p; - const char* p_next; - /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; - int tmp_len; - char* concat_name; - - DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); - - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; - - /* Absolute path? */ -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') - { - concat_name = xstrdup (wrapper); - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - } - else - { -#endif - if (IS_DIR_SEPARATOR (wrapper[0])) - { - concat_name = xstrdup (wrapper); - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - } -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - } -#endif - - for (p = wrapper; *p; p++) - if (*p == '/') - { - has_slash = 1; - break; - } - if (!has_slash) - { - /* no slashes; search PATH */ - const char* path = getenv ("PATH"); - if (path != NULL) - { - for (p = path; *p; p = p_next) - { - const char* q; - size_t p_len; - for (q = p; *q; q++) - if (IS_PATH_SEPARATOR(*q)) - break; - p_len = q - p; - p_next = (*q == '\0' ? q : q + 1); - if (p_len == 0) - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen(tmp); - concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - } - else - { - concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); - memcpy (concat_name, p, p_len); - concat_name[p_len] = '/'; - strcpy (concat_name + p_len + 1, wrapper); - } - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - } - } - /* not found in PATH; assume curdir */ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen(tmp); - concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - return NULL; -} - -char * -strendzap(char *str, const char *pat) -{ - size_t len, patlen; - - assert(str != NULL); - assert(pat != NULL); - - len = strlen(str); - patlen = strlen(pat); - - if (patlen <= len) - { - str += len - patlen; - if (strcmp(str, pat) == 0) - *str = '\0'; - } - return str; -} - -static void -lt_error_core (int exit_status, const char * mode, - const char * message, va_list ap) -{ - fprintf (stderr, "%s: %s: ", program_name, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - - if (exit_status >= 0) - exit (exit_status); -} - -void -lt_fatal (const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, "FATAL", message, ap); - va_end (ap); -} -EOF - # we should really use a build-platform specific compiler - # here, but OTOH, the wrappers (shell script and this C one) - # are only useful if you want to execute the "real" binary. - # Since the "real" binary is built for $host, then this - # wrapper might as well be built for $host, too. - $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource - ;; - esac - $rm $output - trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 - - $echo > $output "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). -if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variable: - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$echo are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - echo=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$echo works! - : - else - # Restart under the correct shell, and then maybe \$echo will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $echo >> $output "\ - - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - $echo >> $output "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $mkdir \"\$progdir\" - else - $rm \"\$progdir/\$file\" - fi" - - $echo >> $output "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $echo \"\$relink_command_output\" >&2 - $rm \"\$progdir/\$file\" - exit $EXIT_FAILURE - fi - fi - - $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $rm \"\$progdir/\$program\"; - $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $rm \"\$progdir/\$file\" - fi" - else - $echo >> $output "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - $echo >> $output "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $echo >> $output "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2*) - $echo >> $output "\ - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $echo >> $output "\ - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" - ;; - esac - $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \$*\" - exit $EXIT_FAILURE - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - $echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit $EXIT_FAILURE - fi -fi\ -" - chmod +x $output - fi - exit $EXIT_SUCCESS - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - oldobjs="$old_deplibs $non_pic_objects" - fi - addlibs="$old_convenience" - fi - - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $addlibs - oldobjs="$oldobjs $func_extract_archives_result" - fi - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - cmds=$old_archive_from_new_cmds - else - # POSIX demands no paths to be encoded in archives. We have - # to avoid creating archives with duplicate basenames if we - # might have to extract them afterwards, e.g., when creating a - # static archive out of a convenience library, or when linking - # the entirety of a libtool archive into another (currently - # not supported by libtool). - if (for obj in $oldobjs - do - $echo "X$obj" | $Xsed -e 's%^.*/%%' - done | sort | sort -uc >/dev/null 2>&1); then - : - else - $echo "copying selected object files to avoid basename conflicts..." - - if test -z "$gentop"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "$gentop"; then - exit $exit_status - fi - fi - - save_oldobjs=$oldobjs - oldobjs= - counter=1 - for obj in $save_oldobjs - do - objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - case " $oldobjs " in - " ") oldobjs=$obj ;; - *[\ /]"$objbase "*) - while :; do - # Make sure we don't pick an alternate name that also - # overlaps. - newobj=lt$counter-$objbase - counter=`expr $counter + 1` - case " $oldobjs " in - *[\ /]"$newobj "*) ;; - *) if test ! -f "$gentop/$newobj"; then break; fi ;; - esac - done - $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - $run ln "$obj" "$gentop/$newobj" || - $run cp "$obj" "$gentop/$newobj" - oldobjs="$oldobjs $gentop/$newobj" - ;; - *) oldobjs="$oldobjs $obj" ;; - esac - done - fi - - eval cmds=\"$old_archive_cmds\" - - if len=`expr "X$cmds" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - cmds=$old_archive_cmds - else - # the command line is too long to link in one step, link in parts - $echo "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - - # Is there a better way of finding the last object in the list? - for obj in $save_oldobjs - do - last_oldobj=$obj - done - for obj in $save_oldobjs - do - oldobjs="$objlist $obj" - objlist="$objlist $obj" - eval test_cmds=\"$old_archive_cmds\" - if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - if test "$obj" = "$last_oldobj" ; then - RANLIB=$save_RANLIB - fi - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" - objlist= - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - if test "X$oldobjs" = "X" ; then - eval cmds=\"\$concat_cmds\" - else - eval cmds=\"\$concat_cmds~\$old_archive_cmds\" - fi - fi - fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - eval cmd=\"$cmd\" - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$generated"; then - $show "${rm}r$generated" - $run ${rm}r$generated - fi - - # Now create the libtool archive. - case $output in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - $show "creating $output" - - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" - fi - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` - if test "$hardcode_automatic" = yes ; then - relink_command= - fi - - - # Only create the output if not a dry run. - if test -z "$run"; then - for installed in no yes; do - if test "$installed" = yes; then - if test -z "$install_libdir"; then - break - fi - output="$output_objdir/$outputname"i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - newdependency_libs="$newdependency_libs $libdir/$name" - ;; - *) newdependency_libs="$newdependency_libs $deplib" ;; - esac - done - dependency_libs="$newdependency_libs" - newdlfiles= - for lib in $dlfiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - newdlfiles="$newdlfiles $libdir/$name" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - newdlprefiles="$newdlprefiles $libdir/$name" - done - dlprefiles="$newdlprefiles" - else - newdlfiles= - for lib in $dlfiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlfiles="$newdlfiles $abs" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlprefiles="$newdlprefiles $abs" - done - dlprefiles="$newdlprefiles" - fi - $rm $output - # place dlname in correct position for cygwin - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; - esac - $echo > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$tdlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Should we warn about portability when linking against -modules? -shouldnotlink=$module - -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' - -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes; then - $echo >> $output "\ -relink_command=\"$relink_command\"" - fi - done - fi - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? - ;; - esac - exit $EXIT_SUCCESS - ;; - - # libtool install mode - install) - modename="$modename: install" - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | grep shtool > /dev/null; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg=$nonopt - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog$arg" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest=$arg - continue - fi - - case $arg in - -d) isdir=yes ;; - -f) - case " $install_prog " in - *[\\\ /]cp\ *) ;; - *) prev=$arg ;; - esac - ;; - -g | -m | -o) prev=$arg ;; - -s) - stripme=" -s" - continue - ;; - -*) - ;; - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest=$arg - continue - fi - ;; - esac - - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done - - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 - fi - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` - - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test "$#" -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - library_names= - old_library= - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - if test "$inst_prefix_dir" = "$destdir"; then - $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 - exit $EXIT_FAILURE - fi - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP` - else - relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP` - fi - - $echo "$modename: warning: relinking \`$file'" 1>&2 - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - exit $EXIT_FAILURE - fi - fi - - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift - - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$srcname $destdir/$realname" - $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? - if test -n "$stripme" && test -n "$striplib"; then - $show "$striplib $destdir/$realname" - $run eval "$striplib $destdir/$realname" || exit $? - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - if test "$linkname" != "$realname"; then - $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" - $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" - fi - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - cmds=$postinstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' - fi - - exit $lt_exit - } - done - IFS="$save_ifs" - fi - - # Install the pseudo-library for information purposes. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - instname="$dir/$name"i - $show "$install_prog $instname $destdir/$name" - $run eval "$install_prog $instname $destdir/$name" || exit $? - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? - fi - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` - - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? - fi - exit $EXIT_SUCCESS - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext="" - case $file in - *.exe) - if test ! -f "$file"; then - file=`$echo $file|${SED} 's,.exe$,,'` - stripped_ext=".exe" - fi - ;; - esac - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin*|*mingw*) - wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` - ;; - *) - wrapper=$file - ;; - esac - if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then - notinst_deplibs= - relink_command= - - # Note that it is not necessary on cygwin/mingw to append a dot to - # foo even if both foo and FILE.exe exist: automatic-append-.exe - # behavior happens only for exec(3), not for open(2)! Also, sourcing - # `FILE.' does not work on cygwin managed mounts. - # - # If there is no directory component, then add one. - case $wrapper in - */* | *\\*) . ${wrapper} ;; - *) . ./${wrapper} ;; - esac - - # Check the variables that should have been set. - if test -z "$notinst_deplibs"; then - $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 - exit $EXIT_FAILURE - fi - - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done - - relink_command= - # Note that it is not necessary on cygwin/mingw to append a dot to - # foo even if both foo and FILE.exe exist: automatic-append-.exe - # behavior happens only for exec(3), not for open(2)! Also, sourcing - # `FILE.' does not work on cygwin managed mounts. - # - # If there is no directory component, then add one. - case $wrapper in - */* | *\\*) . ${wrapper} ;; - *) . ./${wrapper} ;; - esac - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - if test "$finalize" = yes && test -z "$run"; then - tmpdir=`func_mktempdir` - file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP` - - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - ${rm}r "$tmpdir" - continue - fi - file="$outputname" - else - $echo "$modename: warning: cannot relink \`$file'" 1>&2 - fi - else - # Install the binary that we compiled earlier. - file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` - ;; - esac - ;; - esac - $show "$install_prog$stripme $file $destfile" - $run eval "$install_prog\$stripme \$file \$destfile" || exit $? - test -n "$outputname" && ${rm}r "$tmpdir" - ;; - esac - done - - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? - - if test -n "$stripme" && test -n "$old_striplib"; then - $show "$old_striplib $oldlib" - $run eval "$old_striplib $oldlib" || exit $? - fi - - # Do each command in the postinstall commands. - cmds=$old_postinstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi - ;; - - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - cmds=$finish_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || admincmds="$admincmds - $cmd" - done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - test "$show" = : && exit $EXIT_SUCCESS - - $echo "X----------------------------------------------------------------------" | $Xsed - $echo "Libraries have been installed in:" - for libdir in $libdirs; do - $echo " $libdir" - done - $echo - $echo "If you ever happen to want to link against installed libraries" - $echo "in a given directory, LIBDIR, you must either use libtool, and" - $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - $echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - $echo " during execution" - fi - if test -n "$runpath_var"; then - $echo " - add LIBDIR to the \`$runpath_var' environment variable" - $echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $echo " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $echo " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - $echo - $echo "See any operating system documentation about shared libraries for" - $echo "more information, such as the ld(1) and ld.so(8) manual pages." - $echo "X----------------------------------------------------------------------" | $Xsed - exit $EXIT_SUCCESS - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit $EXIT_FAILURE - fi - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test ! -f "$file"; then - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Read the libtool library. - dlname= - library_names= - - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - if test ! -f "$dir/$dlname"; then - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit $EXIT_FAILURE - fi - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; - - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done - - if test -z "$run"; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved environment variables - for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES - do - eval "if test \"\${save_$lt_var+set}\" = set; then - $lt_var=\$save_$lt_var; export $lt_var - fi" - done - - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - fi - $echo "$cmd$args" - exit $EXIT_SUCCESS - fi - ;; - - # libtool clean and uninstall mode - clean | uninstall) - modename="$modename: $mode" - rm="$nonopt" - files= - rmforce= - exit_status=0 - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - for arg - do - case $arg in - -f) rm="$rm $arg"; rmforce=yes ;; - -*) rm="$rm $arg" ;; - *) files="$files $arg" ;; - esac - done - - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - rmdirs= - - origobjdir="$objdir" - for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$file"; then - dir=. - objdir="$origobjdir" - else - objdir="$dir/$origobjdir" - fi - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - test "$mode" = uninstall && objdir="$dir" - - # Remember objdir for removal later, being careful to avoid duplicates - if test "$mode" = clean; then - case " $rmdirs " in - *" $objdir "*) ;; - *) rmdirs="$rmdirs $objdir" ;; - esac - fi - - # Don't error if the file doesn't exist and rm -f was used. - if (test -L "$file") >/dev/null 2>&1 \ - || (test -h "$file") >/dev/null 2>&1 \ - || test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 - continue - elif test "$rmforce" = yes; then - continue - fi - - rmfiles="$file" - - case $name in - *.la) - # Possibly a libtool archive, so verify it. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - . $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - rmfiles="$rmfiles $objdir/$n" - done - test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - - case "$mode" in - clean) - case " $library_names " in - # " " in the beginning catches empty $dlname - *" $dlname "*) ;; - *) rmfiles="$rmfiles $objdir/$dlname" ;; - esac - test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - ;; - uninstall) - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - cmds=$postuninstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - cmds=$old_postuninstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" - fi - # FIXME: should reinstall the best remaining shared library. - ;; - esac - fi - ;; - - *.lo) - # Possibly a libtool object, so verify it. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - - # Read the .lo file - . $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" \ - && test "$pic_object" != none; then - rmfiles="$rmfiles $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" \ - && test "$non_pic_object" != none; then - rmfiles="$rmfiles $dir/$non_pic_object" - fi - fi - ;; - - *) - if test "$mode" = clean ; then - noexename=$name - case $file in - *.exe) - file=`$echo $file|${SED} 's,.exe$,,'` - noexename=`$echo $name|${SED} 's,.exe$,,'` - # $file with .exe has already been added to rmfiles, - # add $file without .exe - rmfiles="$rmfiles $file" - ;; - esac - # Do a test to see if this is a libtool program. - if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - relink_command= - . $dir/$noexename - - # note $name still contains .exe if it was in $file originally - # as does the version of $file that was added into $rmfiles - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" - fi - if test "X$noexename" != "X$name" ; then - rmfiles="$rmfiles $objdir/lt-${noexename}.c" - fi - fi - fi - ;; - esac - $show "$rm $rmfiles" - $run $rm $rmfiles || exit_status=1 - done - objdir="$origobjdir" - - # Try to remove the ${objdir}s in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then - $show "rmdir $dir" - $run rmdir $dir >/dev/null 2>&1 - fi - done - - exit $exit_status - ;; - - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - if test -z "$exec_cmd"; then - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE - fi -fi # test -z "$show_help" - -if test -n "$exec_cmd"; then - eval exec $exec_cmd - exit $EXIT_FAILURE -fi - -# We need to display help for each of the modes. -case $mode in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - - --config show all configuration variables - --debug enable verbose shell tracing --n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG - --version print version information - -MODE must be one of the following: - - clean remove files from the build directory - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE. - -Report bugs to ." - exit $EXIT_SUCCESS - ;; - -clean) - $echo \ -"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -static always build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of uninstalled libtool libraries - -static-libtool-libs - do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - -uninstall) - $echo \ -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; -esac - -$echo -$echo "Try \`$modename --help' for more information about other modes." - -exit $? - -# The TAGs below are defined such that we never get into a situation -# in which we disable both kinds of libraries. Given conflicting -# choices, we go for a static library, that is the most portable, -# since we can't tell whether shared libraries were disabled because -# the user asked for that or because the platform doesn't support -# them. This is particularly important on AIX, because we don't -# support having both static and shared libraries enabled at the same -# time on that platform, so we default to a shared-only configuration. -# If a disable-shared tag is given, we'll fallback to a static-only -# configuration. But we'll never go from static-only to shared-only. - -# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -disable_libs=shared -# ### END LIBTOOL TAG CONFIG: disable-shared - -# ### BEGIN LIBTOOL TAG CONFIG: disable-static -disable_libs=static -# ### END LIBTOOL TAG CONFIG: disable-static - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: diff --git a/m4/Makefile b/m4/Makefile deleted file mode 100644 index 046f814c83d98..0000000000000 --- a/m4/Makefile +++ /dev/null @@ -1,359 +0,0 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. -# m4/Makefile. Generated from Makefile.in by configure. - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -pkgdatadir = $(datadir)/tre -pkglibdir = $(libdir)/tre -pkgincludedir = $(includedir)/tre -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = x86_64-unknown-freebsd8.0 -host_triplet = x86_64-unknown-freebsd8.0 -target_triplet = x86_64-unknown-freebsd8.0 -subdir = m4 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/ac_libtool_tags.m4 \ - $(top_srcdir)/m4/ax_check_funcs_comp.m4 \ - $(top_srcdir)/m4/ax_check_sign.m4 \ - $(top_srcdir)/m4/ax_decl_wchar_max.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \ - $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ - $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/m4/vl_prog_cc_warnings.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/utils/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h \ - $(top_builddir)/lib/tre-config.h -CONFIG_CLEAN_FILES = -SOURCES = -DIST_SOURCES = -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run aclocal-1.10 -ALLOCA = -AMTAR = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run tar -AR = ar -AS = as -AUTOCONF = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoconf -AUTOHEADER = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoheader -AUTOMAKE = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run automake-1.10 -AWK = nawk -CC = gcc -CCDEPMODE = depmode=gcc3 -CFLAGS = -g -O2 -Wall -CPP = gcc -E -CPPFLAGS = -CYGPATH_W = echo -DEFS = -DHAVE_CONFIG_H -DEPDIR = .deps -DLLTOOL = dlltool -DSYMUTIL = -ECHO = echo -ECHO_C = -ECHO_N = -n -ECHO_T = -EGREP = /usr/bin/grep -E -EXEEXT = -GETTEXT_MACRO_VERSION = 0.17 -GMSGFMT = /usr/local/bin/msgfmt -GMSGFMT_015 = /usr/local/bin/msgfmt -GREP = /usr/bin/grep -INSTALL = /usr/bin/install -c -INSTALL_DATA = ${INSTALL} -m 644 -INSTALL_PROGRAM = ${INSTALL} -INSTALL_SCRIPT = ${INSTALL} -INSTALL_STRIP_PROGRAM = $(install_sh) -c -s -INTLLIBS = -INTL_MACOSX_LIBS = -LDFLAGS = -LIBICONV = /usr/local/lib/libiconv.so -Wl,-rpath -Wl,/usr/local/lib -LIBINTL = -LIBOBJS = -LIBS = -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LN_S = ln -s -LTLIBICONV = -L/usr/local/lib -liconv -R/usr/local/lib -LTLIBINTL = -LTLIBOBJS = -MAKEINFO = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run makeinfo -MKDIR_P = ../utils/install-sh -c -d -MSGFMT = /usr/local/bin/msgfmt -MSGFMT_015 = /usr/local/bin/msgfmt -MSGMERGE = /usr/local/bin/msgmerge -NMEDIT = -OBJDUMP = objdump -OBJEXT = o -PACKAGE = tre -PACKAGE_BUGREPORT = tre-general@lists.laurikari.net -PACKAGE_NAME = TRE -PACKAGE_STRING = TRE 0.8.0 -PACKAGE_TARNAME = tre -PACKAGE_VERSION = 0.8.0 -PATH_SEPARATOR = : -POSUB = -RANLIB = ranlib -SED = /usr/local/bin/gsed -SET_MAKE = -SHELL = /bin/sh -STRIP = strip -TRE_VERSION = 0.8.0 -USE_NLS = no -VERSION = 0.8.0 -XGETTEXT = /usr/local/bin/xgettext -XGETTEXT_015 = /usr/local/bin/xgettext -XGETTEXT_EXTRA_OPTIONS = -abs_builddir = /home/gabor/wrk/tre/tre-0.8.0/m4 -abs_srcdir = /home/gabor/wrk/tre/tre-0.8.0/m4 -abs_top_builddir = /home/gabor/wrk/tre/tre-0.8.0 -abs_top_srcdir = /home/gabor/wrk/tre/tre-0.8.0 -ac_ct_CC = gcc -am__include = include -am__leading_dot = . -am__quote = -am__tar = ${AMTAR} chof - "$$tardir" -am__untar = ${AMTAR} xf - -bindir = ${exec_prefix}/bin -build = x86_64-unknown-freebsd8.0 -build_alias = -build_cpu = x86_64 -build_os = freebsd8.0 -build_vendor = unknown -builddir = . -datadir = ${datarootdir} -datarootdir = ${prefix}/share -docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} -dvidir = ${docdir} -exec_prefix = ${prefix} -host = x86_64-unknown-freebsd8.0 -host_alias = -host_cpu = x86_64 -host_os = freebsd8.0 -host_vendor = unknown -htmldir = ${docdir} -includedir = ${prefix}/include -infodir = ${datarootdir}/info -install_sh = $(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh -libdir = ${exec_prefix}/lib -libexecdir = ${exec_prefix}/libexec -localedir = ${datarootdir}/locale -localstatedir = ${prefix}/var -mandir = ${datarootdir}/man -mkdir_p = $(top_builddir)/utils/install-sh -c -d -oldincludedir = /usr/include -pdfdir = ${docdir} -prefix = /usr/local -program_transform_name = s,x,x, -psdir = ${docdir} -sbindir = ${exec_prefix}/sbin -sharedstatedir = ${prefix}/com -srcdir = . -sysconfdir = ${prefix}/etc -target = x86_64-unknown-freebsd8.0 -target_alias = -target_cpu = x86_64 -target_os = freebsd8.0 -target_vendor = unknown -top_builddir = .. -top_srcdir = .. -EXTRA_DIST = \ - ac_libtool_tags.m4 \ - ax_check_funcs_comp.m4 \ - ax_check_sign.m4 \ - ax_decl_wchar_max.m4 \ - vl_prog_cc_warnings.m4 - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign m4/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign m4/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-exec-am: - -install-html: install-html-am - -install-info: install-info-am - -install-man: - -install-pdf: install-pdf-am - -install-ps: install-ps-am - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/m4/Makefile.am b/m4/Makefile.am deleted file mode 100644 index 1677a5b8cfdb6..0000000000000 --- a/m4/Makefile.am +++ /dev/null @@ -1,6 +0,0 @@ -EXTRA_DIST = \ - ac_libtool_tags.m4 \ - ax_check_funcs_comp.m4 \ - ax_check_sign.m4 \ - ax_decl_wchar_max.m4 \ - vl_prog_cc_warnings.m4 diff --git a/m4/Makefile.in b/m4/Makefile.in deleted file mode 100644 index e208d7fef71cf..0000000000000 --- a/m4/Makefile.in +++ /dev/null @@ -1,359 +0,0 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -target_triplet = @target@ -subdir = m4 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/ac_libtool_tags.m4 \ - $(top_srcdir)/m4/ax_check_funcs_comp.m4 \ - $(top_srcdir)/m4/ax_check_sign.m4 \ - $(top_srcdir)/m4/ax_decl_wchar_max.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \ - $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ - $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/m4/vl_prog_cc_warnings.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/utils/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h \ - $(top_builddir)/lib/tre-config.h -CONFIG_CLEAN_FILES = -SOURCES = -DIST_SOURCES = -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ALLOCA = @ALLOCA@ -AMTAR = @AMTAR@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ -GMSGFMT = @GMSGFMT@ -GMSGFMT_015 = @GMSGFMT_015@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INTLLIBS = @INTLLIBS@ -INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ -LDFLAGS = @LDFLAGS@ -LIBICONV = @LIBICONV@ -LIBINTL = @LIBINTL@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LN_S = @LN_S@ -LTLIBICONV = @LTLIBICONV@ -LTLIBINTL = @LTLIBINTL@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -MSGFMT = @MSGFMT@ -MSGFMT_015 = @MSGFMT_015@ -MSGMERGE = @MSGMERGE@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -POSUB = @POSUB@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -TRE_VERSION = @TRE_VERSION@ -USE_NLS = @USE_NLS@ -VERSION = @VERSION@ -XGETTEXT = @XGETTEXT@ -XGETTEXT_015 = @XGETTEXT_015@ -XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target = @target@ -target_alias = @target_alias@ -target_cpu = @target_cpu@ -target_os = @target_os@ -target_vendor = @target_vendor@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -EXTRA_DIST = \ - ac_libtool_tags.m4 \ - ax_check_funcs_comp.m4 \ - ax_check_sign.m4 \ - ax_decl_wchar_max.m4 \ - vl_prog_cc_warnings.m4 - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign m4/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign m4/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-exec-am: - -install-html: install-html-am - -install-info: install-info-am - -install-man: - -install-pdf: install-pdf-am - -install-ps: install-ps-am - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/m4/ac_libtool_tags.m4 b/m4/ac_libtool_tags.m4 deleted file mode 100644 index 23d2a87f322ea..0000000000000 --- a/m4/ac_libtool_tags.m4 +++ /dev/null @@ -1,55 +0,0 @@ -# backported from libtool 1.6 by Paolo Bonzini -# When AC_LIBTOOL_TAGS is used, I redefine _LT_AC_TAGCONFIG -# to be more similar to the libtool 1.6 implementation, which -# uses an m4 loop and m4 case instead of a shell loop. This -# way the CXX/GCJ/F77/RC tests are not always expanded. - -# AC_LIBTOOL_TAGS -# --------------- -# tags to enable -AC_DEFUN([AC_LIBTOOL_TAGS], -[m4_define([_LT_TAGS],[$1]) -m4_define([_LT_AC_TAGCONFIG], [ - if test -f "$ltmain"; then - if test ! -f "${ofile}"; then - AC_MSG_WARN([output file `$ofile' does not exist]) - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) - else - AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) - fi - fi - - AC_FOREACH([_LT_TAG], _LT_TAGS, - [m4_case(_LT_TAG, - [CXX], [ - if test -n "$CXX" && test "X$CXX" != "Xno"; then - AC_LIBTOOL_LANG_CXX_CONFIG - available_tags="$available_tags _LT_TAG" - fi], - [F77], [ - if test -n "$F77" && test "X$F77" != "Xno"; then - AC_LIBTOOL_LANG_F77_CONFIG - available_tags="$available_tags _LT_TAG" - fi], - [GCJ], [ - if test -n "$GCJ" && test "X$GCJ" != "Xno"; then - AC_LIBTOOL_LANG_GCJ_CONFIG - available_tags="$available_tags _LT_TAG" - fi], - [RC], [ - if test -n "$RC" && test "X$RC" != "Xno"; then - AC_LIBTOOL_LANG_RC_CONFIG - available_tags="$available_tags _LT_TAG" - fi], - [m4_errprintn(m4_location[: error: invalid tag name: ]"_LT_TAG") - m4_exit(1)]) - ]) - fi - -])dnl _LT_AC_TAG_CONFIG -]) diff --git a/m4/ax_check_funcs_comp.m4 b/m4/ax_check_funcs_comp.m4 deleted file mode 100644 index d8b3cc243c490..0000000000000 --- a/m4/ax_check_funcs_comp.m4 +++ /dev/null @@ -1,32 +0,0 @@ -dnl Like AC_CHECK_FUNCS, but allows the function definition to be -dnl a macro. This allows for detection of functions which are renamed -dnl with macros to something other than the name we are testing with. -AC_DEFUN([AX_CHECK_FUNCS_COMP],[ - dnl This is magic to make autoheader pick up the config.h.in templates - dnl automatically. This uses macros which are probably not public - dnl (not documented anyway) but this works at least with Automake 2.59. - AC_FOREACH([AX_Func], [$1], - [AH_TEMPLATE(AS_TR_CPP(HAVE_[]AX_Func), - [Define to 1 if you have the `]AX_Func[' function or macro.])])dnl - for ax_func in $1; do - ax_fname=`echo $ax_func | sed "s/@<:@^a-zA-Z0-9_@:>@/_/g"` - ax_symbolname=`echo $ax_func | sed "s/@<:@^a-zA-Z0-9_@:>@/_/g" | tr "@<:@a-z@:>@" "@<:@A-Z@:>@"` - AC_CACHE_CHECK([for $ax_func], ax_cv_func_${ax_fname}, [ - AC_LINK_IFELSE( - [ AC_LANG_PROGRAM( - [$4 -void *foo = $ax_func; -], - [ return foo != $ax_func; ])], - [ eval "ax_cv_func_${ax_fname}=\"yes\"" ], - [ eval "ax_cv_func_${ax_fname}=\"no\"" ])]) - if eval "test \"\${ax_cv_func_${ax_fname}}\" = \"yes\""; then - AC_DEFINE_UNQUOTED(HAVE_${ax_symbolname}, 1, - [Define to 1 if you have the $ax_func() function.]) - $2 - else - true - $3 - fi - done -])dnl diff --git a/m4/ax_check_sign.m4 b/m4/ax_check_sign.m4 deleted file mode 100644 index 19a6d2e43c52c..0000000000000 --- a/m4/ax_check_sign.m4 +++ /dev/null @@ -1,39 +0,0 @@ -dnl @synopsis AX_CHECK_SIGN (TYPE, [ACTION-IF-SIGNED], [ACTION-IF-UNSIGNED], [INCLUDES]) -dnl -dnl Checks whether TYPE is signed or not. If no INCLUDES are specified, -dnl the default includes are used. If ACTION-IF-SIGNED is given, it is -dnl additional shell code to execute when the type is signed. If -dnl ACTION-IF-UNSIGNED is given, it is executed when the type is unsigned. -dnl -dnl This macro assumes that the type exists. Therefore the existence of -dnl the type should be checked before calling this macro. For example: -dnl -dnl AC_CHECK_HEADERS([wchar.h]) -dnl AC_CHECK_TYPE([wchar_t],,[ AC_MSG_ERROR([Type wchar_t not found.]) ]) -dnl AX_CHECK_SIGN([wchar_t], -dnl [ AC_DEFINE(WCHAR_T_SIGNED, 1, [Define if wchar_t is signed]) ], -dnl [ AC_DEFINE(WCHAR_T_UNSIGNED, 1, [Define if wchar_t is unsigned]) ], [ -dnl #ifdef HAVE_WCHAR_H -dnl #include -dnl #endif -dnl ]) -dnl -dnl @version 1.1 -dnl @author Ville Laurikari -AC_DEFUN([AX_CHECK_SIGN], [ - typename=`echo $1 | sed "s/@<:@^a-zA-Z0-9_@:>@/_/g"` - AC_CACHE_CHECK([whether $1 is signed], ax_cv_decl_${typename}_signed, [ - AC_COMPILE_IFELSE( - [ AC_LANG_PROGRAM([$4], - [ int foo @<:@ 1 - 2 * !((($1) -1) < 0) @:>@ ])], - [ eval "ax_cv_decl_${typename}_signed=\"yes\"" ], - [ eval "ax_cv_decl_${typename}_signed=\"no\"" ])]) - symbolname=`echo $1 | sed "s/@<:@^a-zA-Z0-9_@:>@/_/g" | tr "@<:@a-z@:>@" "@<:@A-Z@:>@"` - if eval "test \"\${ax_cv_decl_${typename}_signed}\" = \"yes\""; then - true - $2 - elif eval "test \"\${ax_cv_decl_${typename}_signed}\" = \"no\""; then - true - $3 - fi -])dnl diff --git a/m4/ax_decl_wchar_max.m4 b/m4/ax_decl_wchar_max.m4 deleted file mode 100644 index e01604da5878a..0000000000000 --- a/m4/ax_decl_wchar_max.m4 +++ /dev/null @@ -1,38 +0,0 @@ -dnl @synopsis AX_DECL_WCHAR_MAX -dnl -dnl Checks whether the system headers define WCHAR_MAX or not. If it is -dnl already defined, does nothing. Otherwise checks the size and signedness -dnl of `wchar_t', and defines WCHAR_MAX to the maximum value that can be -dnl stored in a variable of type `wchar_t'. -dnl -dnl @version 1.1 -dnl @author Ville Laurikari -dnl -AC_DEFUN([AX_DECL_WCHAR_MAX], [ - AC_CACHE_CHECK([whether WCHAR_MAX is defined], ax_cv_decl_wchar_max, [ - AC_COMPILE_IFELSE( - [AC_LANG_PROGRAM([ -#ifdef HAVE_WCHAR_H -#include -#endif -], [WCHAR_MAX])], - [ax_cv_decl_wchar_max="yes"], - [ax_cv_decl_wchar_max="no"])]) - if test $ax_cv_decl_wchar_max = "no"; then - AX_CHECK_SIGN([wchar_t], - [ wc_signed="yes" - AC_DEFINE(WCHAR_T_SIGNED, 1, [Define if wchar_t is signed]) ], - [ wc_signed="no" - AC_DEFINE(WCHAR_T_UNSIGNED, 1, [Define if wchar_t is unsigned])], [ -#ifdef HAVE_WCHAR_H -#include -#endif -]) - if test "$wc_signed" = "yes"; then - AC_DEFINE(WCHAR_MAX, [(1L << (sizeof(wchar_t) * 8 - 1) - 1)], [ -Define to the maximum value of wchar_t if not already defined elsewhere]) - elif test "$wc_signed" = "no"; then - AC_DEFINE(WCHAR_MAX, [(1L << (sizeof(wchar_t) * 8) - 1)]) - fi - fi -])dnl diff --git a/m4/gettext.m4 b/m4/gettext.m4 deleted file mode 100644 index c9ae1f7de8618..0000000000000 --- a/m4/gettext.m4 +++ /dev/null @@ -1,381 +0,0 @@ -# gettext.m4 serial 60 (gettext-0.17) -dnl Copyright (C) 1995-2007 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2006. - -dnl Macro to add for using GNU gettext. - -dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). -dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The -dnl default (if it is not specified or empty) is 'no-libtool'. -dnl INTLSYMBOL should be 'external' for packages with no intl directory, -dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. -dnl If INTLSYMBOL is 'use-libtool', then a libtool library -dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, -dnl depending on --{enable,disable}-{shared,static} and on the presence of -dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library -dnl $(top_builddir)/intl/libintl.a will be created. -dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext -dnl implementations (in libc or libintl) without the ngettext() function -dnl will be ignored. If NEEDSYMBOL is specified and is -dnl 'need-formatstring-macros', then GNU gettext implementations that don't -dnl support the ISO C 99 formatstring macros will be ignored. -dnl INTLDIR is used to find the intl libraries. If empty, -dnl the value `$(top_builddir)/intl/' is used. -dnl -dnl The result of the configuration is one of three cases: -dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled -dnl and used. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 2) GNU gettext has been found in the system's C library. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 3) No internationalization, always use English msgid. -dnl Catalog format: none -dnl Catalog extension: none -dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. -dnl The use of .gmo is historical (it was needed to avoid overwriting the -dnl GNU format catalogs when building on a platform with an X/Open gettext), -dnl but we keep it in order not to force irrelevant filename changes on the -dnl maintainers. -dnl -AC_DEFUN([AM_GNU_GETTEXT], -[ - dnl Argument checking. - ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , - [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT -])])])])]) - ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , - [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT -])])])]) - define([gt_included_intl], - ifelse([$1], [external], - ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]), - [yes])) - define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], [])) - gt_NEEDS_INIT - AM_GNU_GETTEXT_NEED([$2]) - - AC_REQUIRE([AM_PO_SUBDIRS])dnl - ifelse(gt_included_intl, yes, [ - AC_REQUIRE([AM_INTL_SUBDIR])dnl - ]) - - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Sometimes libintl requires libiconv, so first search for libiconv. - dnl Ideally we would do this search only after the - dnl if test "$USE_NLS" = "yes"; then - dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT - dnl the configure script would need to contain the same shell code - dnl again, outside any 'if'. There are two solutions: - dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. - dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. - dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not - dnl documented, we avoid it. - ifelse(gt_included_intl, yes, , [ - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - ]) - - dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation. - gt_INTL_MACOSX - - dnl Set USE_NLS. - AC_REQUIRE([AM_NLS]) - - ifelse(gt_included_intl, yes, [ - BUILD_INCLUDED_LIBINTL=no - USE_INCLUDED_LIBINTL=no - ]) - LIBINTL= - LTLIBINTL= - POSUB= - - dnl Add a version number to the cache macros. - case " $gt_needs " in - *" need-formatstring-macros "*) gt_api_version=3 ;; - *" need-ngettext "*) gt_api_version=2 ;; - *) gt_api_version=1 ;; - esac - gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" - gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" - - dnl If we use NLS figure out what method - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - ifelse(gt_included_intl, yes, [ - AC_MSG_CHECKING([whether included gettext is requested]) - AC_ARG_WITH(included-gettext, - [ --with-included-gettext use the GNU gettext library included here], - nls_cv_force_use_gnu_gettext=$withval, - nls_cv_force_use_gnu_gettext=no) - AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) - - nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" - if test "$nls_cv_force_use_gnu_gettext" != "yes"; then - ]) - dnl User does not insist on using GNU NLS library. Figure out what - dnl to use. If GNU gettext is available we use this. Else we have - dnl to fall back to GNU NLS library. - - if test $gt_api_version -ge 3; then - gt_revision_test_code=' -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -changequote(,)dnl -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -changequote([,])dnl -' - else - gt_revision_test_code= - fi - if test $gt_api_version -ge 2; then - gt_expression_test_code=' + * ngettext ("", "", 0)' - else - gt_expression_test_code= - fi - - AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc], - [AC_TRY_LINK([#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern int *_nl_domain_bindings;], - [bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings], - [eval "$gt_func_gnugettext_libc=yes"], - [eval "$gt_func_gnugettext_libc=no"])]) - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - dnl Sometimes libintl requires libiconv, so first search for libiconv. - ifelse(gt_included_intl, yes, , [ - AM_ICONV_LINK - ]) - dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL - dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) - dnl because that would add "-liconv" to LIBINTL and LTLIBINTL - dnl even if libiconv doesn't exist. - AC_LIB_LINKFLAGS_BODY([intl]) - AC_CACHE_CHECK([for GNU gettext in libintl], - [$gt_func_gnugettext_libintl], - [gt_save_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - dnl Now see whether libintl exists and does not depend on libiconv. - AC_TRY_LINK([#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *);], - [bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")], - [eval "$gt_func_gnugettext_libintl=yes"], - [eval "$gt_func_gnugettext_libintl=no"]) - dnl Now see whether libintl exists and depends on libiconv. - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then - LIBS="$LIBS $LIBICONV" - AC_TRY_LINK([#include -$gt_revision_test_code -extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *);], - [bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")], - [LIBINTL="$LIBINTL $LIBICONV" - LTLIBINTL="$LTLIBINTL $LTLIBICONV" - eval "$gt_func_gnugettext_libintl=yes" - ]) - fi - CPPFLAGS="$gt_save_CPPFLAGS" - LIBS="$gt_save_LIBS"]) - fi - - dnl If an already present or preinstalled GNU gettext() is found, - dnl use it. But if this macro is used in GNU gettext, and GNU - dnl gettext is already preinstalled in libintl, we update this - dnl libintl. (Cf. the install rule in intl/Makefile.in.) - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ - || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ - && test "$PACKAGE" != gettext-runtime \ - && test "$PACKAGE" != gettext-tools; }; then - gt_use_preinstalled_gnugettext=yes - else - dnl Reset the values set by searching for libintl. - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - ifelse(gt_included_intl, yes, [ - if test "$gt_use_preinstalled_gnugettext" != "yes"; then - dnl GNU gettext is not found in the C library. - dnl Fall back on included GNU gettext library. - nls_cv_use_gnu_gettext=yes - fi - fi - - if test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions used to generate GNU NLS library. - BUILD_INCLUDED_LIBINTL=yes - USE_INCLUDED_LIBINTL=yes - LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD" - LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD" - LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` - fi - - CATOBJEXT= - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions to use GNU gettext tools. - CATOBJEXT=.gmo - fi - ]) - - if test -n "$INTL_MACOSX_LIBS"; then - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Some extra flags are needed during linking. - LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" - LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" - fi - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - AC_DEFINE(ENABLE_NLS, 1, - [Define to 1 if translation of program messages to the user's native language - is requested.]) - else - USE_NLS=no - fi - fi - - AC_MSG_CHECKING([whether to use NLS]) - AC_MSG_RESULT([$USE_NLS]) - if test "$USE_NLS" = "yes"; then - AC_MSG_CHECKING([where the gettext function comes from]) - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - gt_source="external libintl" - else - gt_source="libc" - fi - else - gt_source="included intl directory" - fi - AC_MSG_RESULT([$gt_source]) - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - AC_MSG_CHECKING([how to link with libintl]) - AC_MSG_RESULT([$LIBINTL]) - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) - fi - - dnl For backward compatibility. Some packages may be using this. - AC_DEFINE(HAVE_GETTEXT, 1, - [Define if the GNU gettext() function is already present or preinstalled.]) - AC_DEFINE(HAVE_DCGETTEXT, 1, - [Define if the GNU dcgettext() function is already present or preinstalled.]) - fi - - dnl We need to process the po/ directory. - POSUB=po - fi - - ifelse(gt_included_intl, yes, [ - dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL - dnl to 'yes' because some of the testsuite requires it. - if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then - BUILD_INCLUDED_LIBINTL=yes - fi - - dnl Make all variables we use known to autoconf. - AC_SUBST(BUILD_INCLUDED_LIBINTL) - AC_SUBST(USE_INCLUDED_LIBINTL) - AC_SUBST(CATOBJEXT) - - dnl For backward compatibility. Some configure.ins may be using this. - nls_cv_header_intl= - nls_cv_header_libgt= - - dnl For backward compatibility. Some Makefiles may be using this. - DATADIRNAME=share - AC_SUBST(DATADIRNAME) - - dnl For backward compatibility. Some Makefiles may be using this. - INSTOBJEXT=.mo - AC_SUBST(INSTOBJEXT) - - dnl For backward compatibility. Some Makefiles may be using this. - GENCAT=gencat - AC_SUBST(GENCAT) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLOBJS= - if test "$USE_INCLUDED_LIBINTL" = yes; then - INTLOBJS="\$(GETTOBJS)" - fi - AC_SUBST(INTLOBJS) - - dnl Enable libtool support if the surrounding package wishes it. - INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix - AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX) - ]) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLLIBS="$LIBINTL" - AC_SUBST(INTLLIBS) - - dnl Make all documented variables known to autoconf. - AC_SUBST(LIBINTL) - AC_SUBST(LTLIBINTL) - AC_SUBST(POSUB) -]) - - -dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized. -m4_define([gt_NEEDS_INIT], -[ - m4_divert_text([DEFAULTS], [gt_needs=]) - m4_define([gt_NEEDS_INIT], []) -]) - - -dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL]) -AC_DEFUN([AM_GNU_GETTEXT_NEED], -[ - m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"]) -]) - - -dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) -AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) diff --git a/m4/iconv.m4 b/m4/iconv.m4 deleted file mode 100644 index 66bc76f48c9c5..0000000000000 --- a/m4/iconv.m4 +++ /dev/null @@ -1,180 +0,0 @@ -# iconv.m4 serial AM6 (gettext-0.17) -dnl Copyright (C) 2000-2002, 2007 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], -[ - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([iconv]) -]) - -AC_DEFUN([AM_ICONV_LINK], -[ - dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and - dnl those with the standalone portable GNU libiconv installed). - AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - - dnl Add $INCICONV to CPPFLAGS before performing the following checks, - dnl because if the user has installed libiconv and not disabled its use - dnl via --without-libiconv-prefix, he wants to use it. The first - dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed. - am_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) - - AC_CACHE_CHECK([for iconv], am_cv_func_iconv, [ - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - AC_TRY_LINK([#include -#include ], - [iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);], - am_cv_func_iconv=yes) - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - AC_TRY_LINK([#include -#include ], - [iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);], - am_cv_lib_iconv=yes - am_cv_func_iconv=yes) - LIBS="$am_save_LIBS" - fi - ]) - if test "$am_cv_func_iconv" = yes; then - AC_CACHE_CHECK([for working iconv], am_cv_func_iconv_works, [ - dnl This tests against bugs in AIX 5.1 and HP-UX 11.11. - am_save_LIBS="$LIBS" - if test $am_cv_lib_iconv = yes; then - LIBS="$LIBS $LIBICONV" - fi - AC_TRY_RUN([ -#include -#include -int main () -{ - /* Test against AIX 5.1 bug: Failures are not distinguishable from successful - returns. */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static const char input[] = "\342\202\254"; /* EURO SIGN */ - char buf[10]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - return 1; - } - } -#if 0 /* This bug could be worked around by the caller. */ - /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; - char buf[50]; - const char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_88591_to_utf8, - (char **) &inptr, &inbytesleft, - &outptr, &outbytesleft); - if ((int)res > 0) - return 1; - } - } -#endif - /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is - provided. */ - if (/* Try standardized names. */ - iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1) - /* Try IRIX, OSF/1 names. */ - && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1) - /* Try AIX names. */ - && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1) - /* Try HP-UX names. */ - && iconv_open ("utf8", "eucJP") == (iconv_t)(-1)) - return 1; - return 0; -}], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no], - [case "$host_os" in - aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; - *) am_cv_func_iconv_works="guessing yes" ;; - esac]) - LIBS="$am_save_LIBS" - ]) - case "$am_cv_func_iconv_works" in - *no) am_func_iconv=no am_cv_lib_iconv=no ;; - *) am_func_iconv=yes ;; - esac - else - am_func_iconv=no am_cv_lib_iconv=no - fi - if test "$am_func_iconv" = yes; then - AC_DEFINE(HAVE_ICONV, 1, - [Define if you have the iconv() function and it works.]) - fi - if test "$am_cv_lib_iconv" = yes; then - AC_MSG_CHECKING([how to link with libiconv]) - AC_MSG_RESULT([$LIBICONV]) - else - dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV - dnl either. - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - AC_SUBST(LIBICONV) - AC_SUBST(LTLIBICONV) -]) - -AC_DEFUN([AM_ICONV], -[ - AM_ICONV_LINK - if test "$am_cv_func_iconv" = yes; then - AC_MSG_CHECKING([for iconv declaration]) - AC_CACHE_VAL(am_cv_proto_iconv, [ - AC_TRY_COMPILE([ -#include -#include -extern -#ifdef __cplusplus -"C" -#endif -#if defined(__STDC__) || defined(__cplusplus) -size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); -#else -size_t iconv(); -#endif -], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const") - am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) - am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` - AC_MSG_RESULT([$]{ac_t:- - }[$]am_cv_proto_iconv) - AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1, - [Define as const if the declaration of iconv() needs const.]) - fi -]) diff --git a/m4/intlmacosx.m4 b/m4/intlmacosx.m4 deleted file mode 100644 index d3f0d904d26ac..0000000000000 --- a/m4/intlmacosx.m4 +++ /dev/null @@ -1,51 +0,0 @@ -# intlmacosx.m4 serial 1 (gettext-0.17) -dnl Copyright (C) 2004-2007 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Checks for special options needed on MacOS X. -dnl Defines INTL_MACOSX_LIBS. -AC_DEFUN([gt_INTL_MACOSX], -[ - dnl Check for API introduced in MacOS X 10.2. - AC_CACHE_CHECK([for CFPreferencesCopyAppValue], - gt_cv_func_CFPreferencesCopyAppValue, - [gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - AC_TRY_LINK([#include ], - [CFPreferencesCopyAppValue(NULL, NULL)], - [gt_cv_func_CFPreferencesCopyAppValue=yes], - [gt_cv_func_CFPreferencesCopyAppValue=no]) - LIBS="$gt_save_LIBS"]) - if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then - AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], 1, - [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.]) - fi - dnl Check for API introduced in MacOS X 10.3. - AC_CACHE_CHECK([for CFLocaleCopyCurrent], gt_cv_func_CFLocaleCopyCurrent, - [gt_save_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - AC_TRY_LINK([#include ], [CFLocaleCopyCurrent();], - [gt_cv_func_CFLocaleCopyCurrent=yes], - [gt_cv_func_CFLocaleCopyCurrent=no]) - LIBS="$gt_save_LIBS"]) - if test $gt_cv_func_CFLocaleCopyCurrent = yes; then - AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], 1, - [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.]) - fi - INTL_MACOSX_LIBS= - if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then - INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation" - fi - AC_SUBST([INTL_MACOSX_LIBS]) -]) diff --git a/m4/lib-ld.m4 b/m4/lib-ld.m4 deleted file mode 100644 index 96c4e2c3396c5..0000000000000 --- a/m4/lib-ld.m4 +++ /dev/null @@ -1,110 +0,0 @@ -# lib-ld.m4 serial 3 (gettext-0.13) -dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl Subroutines of libtool.m4, -dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision -dnl with libtool.m4. - -dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. -AC_DEFUN([AC_LIB_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -case `$LD -v 2>&1 conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]* | [A-Za-z]:[\\/]*)] - [re_direlt='/[^/][^/]*/\.\./'] - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(acl_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break ;; - *) - test "$with_gnu_ld" != yes && break ;; - esac - fi - done - IFS="$ac_save_ifs" -else - acl_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$acl_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_LIB_PROG_LD_GNU -]) diff --git a/m4/lib-link.m4 b/m4/lib-link.m4 deleted file mode 100644 index e3d26fc42dc06..0000000000000 --- a/m4/lib-link.m4 +++ /dev/null @@ -1,709 +0,0 @@ -# lib-link.m4 serial 13 (gettext-0.17) -dnl Copyright (C) 2001-2007 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -AC_PREREQ(2.54) - -dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and -dnl augments the CPPFLAGS variable. -dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname -dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - define([Name],[translit([$1],[./-], [___])]) - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - ac_cv_lib[]Name[]_libs="$LIB[]NAME" - ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" - ac_cv_lib[]Name[]_cppflags="$INC[]NAME" - ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX" - ]) - LIB[]NAME="$ac_cv_lib[]Name[]_libs" - LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" - INC[]NAME="$ac_cv_lib[]Name[]_cppflags" - LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - AC_SUBST([LIB]NAME[_PREFIX]) - dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the - dnl results of this search when this library appears as a dependency. - HAVE_LIB[]NAME=yes - undefine([Name]) - undefine([NAME]) -]) - -dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) -dnl searches for libname and the libraries corresponding to explicit and -dnl implicit dependencies, together with the specified include files and -dnl the ability to compile and link the specified testcode. If found, it -dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and -dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and -dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs -dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. -dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname -dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - define([Name],[translit([$1],[./-], [___])]) - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - - dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - - dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, - dnl because if the user has installed lib[]Name and not disabled its use - dnl via --without-lib[]Name-prefix, he wants to use it. - ac_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - - AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ - ac_save_LIBS="$LIBS" - LIBS="$LIBS $LIB[]NAME" - AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) - LIBS="$ac_save_LIBS" - ]) - if test "$ac_cv_lib[]Name" = yes; then - HAVE_LIB[]NAME=yes - AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) - AC_MSG_CHECKING([how to link with lib[]$1]) - AC_MSG_RESULT([$LIB[]NAME]) - else - HAVE_LIB[]NAME=no - dnl If $LIB[]NAME didn't lead to a usable library, we don't need - dnl $INC[]NAME either. - CPPFLAGS="$ac_save_CPPFLAGS" - LIB[]NAME= - LTLIB[]NAME= - LIB[]NAME[]_PREFIX= - fi - AC_SUBST([HAVE_LIB]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - AC_SUBST([LIB]NAME[_PREFIX]) - undefine([Name]) - undefine([NAME]) -]) - -dnl Determine the platform dependent parameters needed to use rpath: -dnl acl_libext, -dnl acl_shlibext, -dnl acl_hardcode_libdir_flag_spec, -dnl acl_hardcode_libdir_separator, -dnl acl_hardcode_direct, -dnl acl_hardcode_minus_L. -AC_DEFUN([AC_LIB_RPATH], -[ - dnl Tell automake >= 1.10 to complain if config.rpath is missing. - m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])]) - AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS - AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld - AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host - AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir - AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - ]) - wl="$acl_cv_wl" - acl_libext="$acl_cv_libext" - acl_shlibext="$acl_cv_shlibext" - acl_libname_spec="$acl_cv_libname_spec" - acl_library_names_spec="$acl_cv_library_names_spec" - acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - acl_hardcode_direct="$acl_cv_hardcode_direct" - acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" - dnl Determine whether the user wants rpath handling at all. - AC_ARG_ENABLE(rpath, - [ --disable-rpath do not hardcode runtime library paths], - :, enable_rpath=yes) -]) - -dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. -dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found -dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem. -AC_DEFUN([AC_LIB_LINKFLAGS_BODY], -[ - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - dnl Autoconf >= 2.61 supports dots in --with options. - define([N_A_M_E],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit([$1],[.],[_])],[$1])]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_LIB_ARG_WITH([lib]N_A_M_E[-prefix], -[ --with-lib]N_A_M_E[-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib - --without-lib]N_A_M_E[-prefix don't search for lib$1 in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - fi - fi -]) - dnl Search the library and its dependencies in $additional_libdir and - dnl $LDFLAGS. Using breadth-first-seach. - LIB[]NAME= - LTLIB[]NAME= - INC[]NAME= - LIB[]NAME[]_PREFIX= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='$1 $2' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - dnl See if it was already located by an earlier AC_LIB_LINKFLAGS - dnl or AC_LIB_HAVE_LINKFLAGS call. - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" - else - dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined - dnl that this library doesn't exist. So just drop it. - : - fi - else - dnl Search the library lib$name in $additional_libdir and $LDFLAGS - dnl and the already constructed $LIBNAME/$LTLIBNAME. - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - dir="$additional_libdir" - dnl The same code as in the loop below: - dnl First look for a shared library. - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - dnl Then look for a static library. - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - dnl First look for a shared library. - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - dnl Then look for a static library. - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext"; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - dnl Found the library. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - dnl Linking with a shared library. We attempt to hardcode its - dnl directory into the executable's runpath, unless it's the - dnl standard /usr/lib. - if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then - dnl No hardcoding is needed. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - dnl The hardcoding into $LIBNAME is system dependent. - if test "$acl_hardcode_direct" = yes; then - dnl Using DIR/libNAME.so during linking hardcodes DIR into the - dnl resulting binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - dnl Rely on "-L$found_dir". - dnl But don't add it if it's already contained in the LDFLAGS - dnl or the already constructed $LIBNAME - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH - dnl here, because this doesn't fit in flags passed to the - dnl compiler. So give up. No hardcoding. This affects only - dnl very old systems. - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - dnl Linking with a static library. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" - else - dnl We shouldn't come here, but anyway it's good to have a - dnl fallback. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" - fi - fi - dnl Assume the include files are nearby. - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - LIB[]NAME[]_PREFIX="$basedir" - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - dnl Potentially add $additional_includedir to $INCNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's /usr/local/include and we are using GCC on Linux, - dnl 3. if it's already present in $CPPFLAGS or the already - dnl constructed $INCNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INC[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $INCNAME. - INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - dnl Look for dependencies. - if test -n "$found_la"; then - dnl Read the .la file. It defines the variables - dnl dlname, library_names, old_library, dependency_libs, current, - dnl age, revision, installed, dlopen, dlpreopen, libdir. - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - dnl We use only dependency_libs. - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's /usr/local/lib and we are using GCC on Linux, - dnl 3. if it's already present in $LDFLAGS or the already - dnl constructed $LIBNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LIBNAME. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LTLIBNAME. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - dnl Handle this in the next round. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - dnl Handle this in the next round. Throw away the .la's - dnl directory; it is already contained in a preceding -L - dnl option. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - dnl Most likely an immediate library name. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" - ;; - esac - done - fi - else - dnl Didn't find the library; assume it is in the system directories - dnl known to the linker and runtime loader. (All the system - dnl directories known to the linker should also be known to the - dnl runtime loader, otherwise the system is severely misconfigured.) - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user must - dnl pass all path elements in one option. We can arrange that for a - dnl single library, but not when more than one $LIBNAMEs are used. - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl. - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - else - dnl The -rpath options are cumulative. - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - dnl When using libtool, the option that works for both libraries and - dnl executables is -R. The -R options are cumulative. - for found_dir in $ltrpathdirs; do - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" - done - fi -]) - -dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, -dnl unless already present in VAR. -dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes -dnl contains two or three consecutive elements that belong together. -AC_DEFUN([AC_LIB_APPENDTOVAR], -[ - for element in [$2]; do - haveit= - for x in $[$1]; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - [$1]="${[$1]}${[$1]:+ }$element" - fi - done -]) - -dnl For those cases where a variable contains several -L and -l options -dnl referring to unknown libraries and directories, this macro determines the -dnl necessary additional linker options for the runtime path. -dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL]) -dnl sets LDADDVAR to linker options needed together with LIBSVALUE. -dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed, -dnl otherwise linking without libtool is assumed. -AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS], -[ - AC_REQUIRE([AC_LIB_RPATH]) - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - $1= - if test "$enable_rpath" != no; then - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode directories into the resulting - dnl binary. - rpathdirs= - next= - for opt in $2; do - if test -n "$next"; then - dir="$next" - dnl No need to hardcode the standard /usr/lib. - if test "X$dir" != "X/usr/$acl_libdirstem"; then - rpathdirs="$rpathdirs $dir" - fi - next= - else - case $opt in - -L) next=yes ;; - -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'` - dnl No need to hardcode the standard /usr/lib. - if test "X$dir" != "X/usr/$acl_libdirstem"; then - rpathdirs="$rpathdirs $dir" - fi - next= ;; - *) next= ;; - esac - fi - done - if test "X$rpathdirs" != "X"; then - if test -n ""$3""; then - dnl libtool is used for linking. Use -R options. - for dir in $rpathdirs; do - $1="${$1}${$1:+ }-R$dir" - done - else - dnl The linker is used for linking directly. - if test -n "$acl_hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user - dnl must pass all path elements in one option. - alldirs= - for dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir" - done - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - $1="$flag" - else - dnl The -rpath options are cumulative. - for dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - $1="${$1}${$1:+ }$flag" - done - fi - fi - fi - fi - fi - AC_SUBST([$1]) -]) diff --git a/m4/lib-prefix.m4 b/m4/lib-prefix.m4 deleted file mode 100644 index a8684e17e3abd..0000000000000 --- a/m4/lib-prefix.m4 +++ /dev/null @@ -1,185 +0,0 @@ -# lib-prefix.m4 serial 5 (gettext-0.15) -dnl Copyright (C) 2001-2005 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl From Bruno Haible. - -dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and -dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't -dnl require excessive bracketing. -ifdef([AC_HELP_STRING], -[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], -[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) - -dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed -dnl to access previously installed libraries. The basic assumption is that -dnl a user will want packages to use other packages he previously installed -dnl with the same --prefix option. -dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate -dnl libraries, but is otherwise very convenient. -AC_DEFUN([AC_LIB_PREFIX], -[ - AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_REQUIRE([AC_LIB_PREPARE_MULTILIB]) - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_LIB_ARG_WITH([lib-prefix], -[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib - --without-lib-prefix don't search for libraries in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - fi - fi -]) - if test $use_additional = yes; then - dnl Potentially add $additional_includedir to $CPPFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's already present in $CPPFLAGS, - dnl 3. if it's /usr/local/include and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - for x in $CPPFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $CPPFLAGS. - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" - fi - fi - fi - fi - dnl Potentially add $additional_libdir to $LDFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's already present in $LDFLAGS, - dnl 3. if it's /usr/local/lib and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then - haveit= - for x in $LDFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LDFLAGS. - LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" - fi - fi - fi - fi - fi -]) - -dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, -dnl acl_final_exec_prefix, containing the values to which $prefix and -dnl $exec_prefix will expand at the end of the configure script. -AC_DEFUN([AC_LIB_PREPARE_PREFIX], -[ - dnl Unfortunately, prefix and exec_prefix get only finally determined - dnl at the end of configure. - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the -dnl variables prefix and exec_prefix bound to the values they will have -dnl at the end of the configure script. -AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], -[ - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - $1 - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_PREPARE_MULTILIB creates a variable acl_libdirstem, containing -dnl the basename of the libdir, either "lib" or "lib64". -AC_DEFUN([AC_LIB_PREPARE_MULTILIB], -[ - dnl There is no formal standard regarding lib and lib64. The current - dnl practice is that on a system supporting 32-bit and 64-bit instruction - dnl sets or ABIs, 64-bit libraries go under $prefix/lib64 and 32-bit - dnl libraries go under $prefix/lib. We determine the compiler's default - dnl mode by looking at the compiler's library search path. If at least - dnl of its elements ends in /lib64 or points to a directory whose absolute - dnl pathname ends in /lib64, we assume a 64-bit ABI. Otherwise we use the - dnl default, namely "lib". - acl_libdirstem=lib - searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` - if test -n "$searchpath"; then - acl_save_IFS="${IFS= }"; IFS=":" - for searchdir in $searchpath; do - if test -d "$searchdir"; then - case "$searchdir" in - */lib64/ | */lib64 ) acl_libdirstem=lib64 ;; - *) searchdir=`cd "$searchdir" && pwd` - case "$searchdir" in - */lib64 ) acl_libdirstem=lib64 ;; - esac ;; - esac - fi - done - IFS="$acl_save_IFS" - fi -]) diff --git a/m4/nls.m4 b/m4/nls.m4 deleted file mode 100644 index 7967cc2f9acb5..0000000000000 --- a/m4/nls.m4 +++ /dev/null @@ -1,31 +0,0 @@ -# nls.m4 serial 3 (gettext-0.15) -dnl Copyright (C) 1995-2003, 2005-2006 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -AC_PREREQ(2.50) - -AC_DEFUN([AM_NLS], -[ - AC_MSG_CHECKING([whether NLS is requested]) - dnl Default is enabled NLS - AC_ARG_ENABLE(nls, - [ --disable-nls do not use Native Language Support], - USE_NLS=$enableval, USE_NLS=yes) - AC_MSG_RESULT($USE_NLS) - AC_SUBST(USE_NLS) -]) diff --git a/m4/po.m4 b/m4/po.m4 deleted file mode 100644 index 0734762ab1071..0000000000000 --- a/m4/po.m4 +++ /dev/null @@ -1,449 +0,0 @@ -# po.m4 serial 15 (gettext-0.17) -dnl Copyright (C) 1995-2007 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -AC_PREREQ(2.50) - -dnl Checks for all prerequisites of the po subdirectory. -AC_DEFUN([AM_PO_SUBDIRS], -[ - AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl - AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake - AC_REQUIRE([AM_NLS])dnl - - dnl Release version of the gettext macros. This is used to ensure that - dnl the gettext macros and po/Makefile.in.in are in sync. - AC_SUBST([GETTEXT_MACRO_VERSION], [0.17]) - - dnl Perform the following tests also if --disable-nls has been given, - dnl because they are needed for "make dist" to work. - - dnl Search for GNU msgfmt in the PATH. - dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. - dnl The second test excludes FreeBSD msgfmt. - AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, - [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - - dnl Test whether it is GNU msgfmt >= 0.15. -changequote(,)dnl - case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;; - *) MSGFMT_015=$MSGFMT ;; - esac -changequote([,])dnl - AC_SUBST([MSGFMT_015]) -changequote(,)dnl - case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; - *) GMSGFMT_015=$GMSGFMT ;; - esac -changequote([,])dnl - AC_SUBST([GMSGFMT_015]) - - dnl Search for GNU xgettext 0.12 or newer in the PATH. - dnl The first test excludes Solaris xgettext and early GNU xgettext versions. - dnl The second test excludes FreeBSD xgettext. - AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - dnl Remove leftover from FreeBSD xgettext call. - rm -f messages.po - - dnl Test whether it is GNU xgettext >= 0.15. -changequote(,)dnl - case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; - *) XGETTEXT_015=$XGETTEXT ;; - esac -changequote([,])dnl - AC_SUBST([XGETTEXT_015]) - - dnl Search for GNU msgmerge 0.11 or newer in the PATH. - AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, - [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :) - - dnl Installation directories. - dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we - dnl have to define it here, so that it can be used in po/Makefile. - test -n "$localedir" || localedir='${datadir}/locale' - AC_SUBST([localedir]) - - dnl Support for AM_XGETTEXT_OPTION. - test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= - AC_SUBST([XGETTEXT_EXTRA_OPTIONS]) - - AC_CONFIG_COMMANDS([po-directories], [[ - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - # Treat a directory as a PO directory if and only if it has a - # POTFILES.in file. This allows packages to have multiple PO - # directories under different names or in different locations. - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - POMAKEFILEDEPS="POTFILES.in" - # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"` - # Hide the ALL_LINGUAS assigment from automake < 1.5. - eval 'ALL_LINGUAS''=$ALL_LINGUAS_' - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # The set of available languages was given in configure.in. - # Hide the ALL_LINGUAS assigment from automake < 1.5. - eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' - fi - # Compute POFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po) - # Compute UPDATEPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update) - # Compute DUMMYPOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop) - # Compute GMOFILES - # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo) - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - UPDATEPOFILES= - DUMMYPOFILES= - GMOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done]], - [# Capture the value of obsolete ALL_LINGUAS because we need it to compute - # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it - # from automake < 1.5. - eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="${LINGUAS-%UNSET%}" - ]) -]) - -dnl Postprocesses a Makefile in a directory containing PO files. -AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE], -[ - # When this code is run, in config.status, two variables have already been - # set: - # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in, - # - LINGUAS is the value of the environment variable LINGUAS at configure - # time. - -changequote(,)dnl - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - # Find a way to echo strings without interpreting backslash. - if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then - gt_echo='echo' - else - if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then - gt_echo='printf %s\n' - else - echo_func () { - cat < "$ac_file.tmp" - if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then - # Add dependencies that cannot be formulated as a simple suffix rule. - for lang in $ALL_LINGUAS; do - frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'` - cat >> "$ac_file.tmp" < /dev/null; then - # Add dependencies that cannot be formulated as a simple suffix rule. - for lang in $ALL_LINGUAS; do - frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'` - cat >> "$ac_file.tmp" <> "$ac_file.tmp" <, 1996. - -AC_PREREQ(2.50) - -# Search path for a program which passes the given test. - -dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN([AM_PATH_PROG_WITH_TEST], -[ -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL(ac_cv_path_$1, -[case "[$]$1" in - [[\\/]]* | ?:[[\\/]]*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in ifelse([$5], , $PATH, [$5]); do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$ac_save_IFS" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then - AC_MSG_RESULT([$]$1) -else - AC_MSG_RESULT(no) -fi -AC_SUBST($1)dnl -]) diff --git a/m4/vl_prog_cc_warnings.m4 b/m4/vl_prog_cc_warnings.m4 deleted file mode 100644 index a4163ca34b456..0000000000000 --- a/m4/vl_prog_cc_warnings.m4 +++ /dev/null @@ -1,128 +0,0 @@ -dnl @synopsis VL_PROG_CC_WARNINGS([ANSI]) -dnl -dnl Enables a high level of warnings for the C compiler. Optionally, -dnl if the first argument is nonempty, turns on flags which enforce and/or -dnl enable proper ANSI C if such are known with the compiler used. -dnl -dnl Currently this macro knows about GCC, Solaris C compiler, -dnl Digital Unix C compiler, C for AIX Compiler, HP-UX C compiler, -dnl IRIX C compiler, NEC SX-5 (Super-UX 10) C compiler, and Cray J90 -dnl (Unicos 10.0.0.8) C compiler. -dnl -dnl @version 1.2 -dnl @author Ville Laurikari -dnl -AC_DEFUN([VL_PROG_CC_WARNINGS], [ - # Don't override if CFLAGS was already set. - if test -z "$ac_env_CFLAGS_set"; then - ansi=$1 - if test -z "$ansi"; then - msg="for C compiler warning flags" - else - msg="for C compiler warning and ANSI conformance flags" - fi - AC_CACHE_CHECK($msg, vl_cv_prog_cc_warnings, [ - if test -n "$CC"; then - cat > conftest.c <&1 | grep -i "WorkShop" > /dev/null 2>&1 && - $CC -c -v -Xc conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="-v" - else - vl_cv_prog_cc_warnings="-v -Xc" - fi - - dnl Compaq (formerly Digital Unix) C compiler - elif ($CC -V 2>&1 | grep -i "Digital UNIX Compiler" > /dev/null 2>&1 || - $CC -V 2>&1 | grep -i "Compaq C" > /dev/null 2>&1) && - $CC -c -verbose -w0 -warnprotos -std1 conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="-verbose -w0 -warnprotos" - else - vl_cv_prog_cc_warnings="-verbose -w0 -warnprotos -std1" - fi - - dnl C for AIX Compiler - elif $CC 2>&1 | grep -i "C for AIX Compiler" > /dev/null 2>&1 && - $CC -c -qlanglvl=ansi -qinfo=all conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="-qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd:nouni:nocnv" - else - vl_cv_prog_cc_warnings="-qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd:nouni:nocnv -qlanglvl=ansi" - fi - - dnl IRIX C compiler - elif $CC -version 2>&1 | grep -i "MIPSpro Compilers" > /dev/null 2>&1 && - $CC -c -fullwarn -ansi -ansiE conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="-fullwarn" - else - vl_cv_prog_cc_warnings="-fullwarn -ansi -ansiE" - fi - - dnl HP-UX C compiler - elif what $CC 2>&1 | grep -i "HP C Compiler" > /dev/null 2>&1 && - $CC -c -Aa +w1 conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="+w1" - else - vl_cv_prog_cc_warnings="+w1 -Aa" - fi - - dnl The NEC SX-5 (Super-UX 10) C compiler - elif $CC -V 2>&1 | grep "/SX" > /dev/null 2>&1 && - $CC -c -pvctl[,]fullmsg -Xc conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="-pvctl[,]fullmsg" - else - vl_cv_prog_cc_warnings="-pvctl[,]fullmsg -Xc" - fi - - dnl The Cray C compiler (Unicos) - elif $CC -V 2>&1 | grep -i "Cray" > /dev/null 2>&1 && - $CC -c -h msglevel 2 conftest.c > /dev/null 2>&1 && - test -f conftest.o; then - if test -z "$ansi"; then - vl_cv_prog_cc_warnings="-h msglevel 2" - else - vl_cv_prog_cc_warnings="-h msglevel 2 -h conform" - fi - - fi - rm -f conftest.* - fi - if test -n "$vl_cv_prog_cc_warnings"; then - CFLAGS="$CFLAGS $vl_cv_prog_cc_warnings" - else - vl_cv_prog_cc_warnings="unknown" - fi - ]) - fi -])dnl diff --git a/po/Makefile b/po/Makefile deleted file mode 100644 index b09de09f25b82..0000000000000 --- a/po/Makefile +++ /dev/null @@ -1,519 +0,0 @@ -# Makefile for PO directory in any package using GNU gettext. -# Copyright (C) 1995-1997, 2000-2007 by Ulrich Drepper -# -# This file can be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU General Public -# License but which still want to provide support for the GNU gettext -# functionality. -# Please note that the actual code of GNU gettext is covered by the GNU -# General Public License and is *not* in the public domain. -# -# Origin: gettext-0.17 -GETTEXT_MACRO_VERSION = 0.17 - -PACKAGE = tre -VERSION = 0.8.0 -PACKAGE_BUGREPORT = tre-general@lists.laurikari.net - -SHELL = /bin/sh - - -srcdir = . -top_srcdir = .. - - -prefix = /usr/local -exec_prefix = ${prefix} -datarootdir = ${prefix}/share -datadir = ${datarootdir} -localedir = ${datarootdir}/locale -gettextsrcdir = $(datadir)/gettext/po - -INSTALL = /usr/bin/install -c -INSTALL_DATA = ${INSTALL} -m 644 - -# We use $(mkdir_p). -# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as -# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, -# $(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh does not start with $(SHELL), so we add it. -# In automake >= 1.10, $(top_builddir)/utils/install-sh -c -d is derived from ${MKDIR_P}, which is defined -# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake -# versions, $(mkinstalldirs) and $(install_sh) are unused. -mkinstalldirs = $(SHELL) $(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh -d -install_sh = $(SHELL) $(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh -MKDIR_P = ../utils/install-sh -c -d -mkdir_p = $(top_builddir)/utils/install-sh -c -d - -GMSGFMT_ = /usr/local/bin/msgfmt -GMSGFMT_no = /usr/local/bin/msgfmt -GMSGFMT_yes = /usr/local/bin/msgfmt -GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) -MSGFMT_ = /usr/local/bin/msgfmt -MSGFMT_no = /usr/local/bin/msgfmt -MSGFMT_yes = /usr/local/bin/msgfmt -MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) -XGETTEXT_ = /usr/local/bin/xgettext -XGETTEXT_no = /usr/local/bin/xgettext -XGETTEXT_yes = /usr/local/bin/xgettext -XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) -MSGMERGE = msgmerge -MSGMERGE_UPDATE = /usr/local/bin/msgmerge --update -MSGINIT = msginit -MSGCONV = msgconv -MSGFILTER = msgfilter - -POFILES = fi.po sv.po -GMOFILES = fi.gmo sv.gmo -UPDATEPOFILES = fi.po-update sv.po-update -DUMMYPOFILES = fi.nop sv.nop -DISTFILES.common = Makefile.in.in remove-potcdate.sin \ -$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) -DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ -$(POFILES) $(GMOFILES) \ -$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) - -POTFILES = \ - ../lib/regerror.c \ - ../src/agrep.c - -CATALOGS = fi.gmo sv.gmo - -# Makevars gets inserted here. (Don't remove this line!) -# Makefile variables for PO directory in any package using GNU gettext. - -# Usually the message domain is the same as the package name. -DOMAIN = $(PACKAGE) - -# These two variables depend on the location of this directory. -subdir = po -top_builddir = .. - -# These options get passed to xgettext. -XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ - -# This is the copyright holder that gets inserted into the header of the -# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding -# package. (Note that the msgstr strings, extracted from the package's -# sources, belong to the copyright holder of the package.) Translators are -# expected to transfer the copyright for their translations to this person -# or entity, or to disclaim their copyright. The empty string stands for -# the public domain; in this case the translators are expected to disclaim -# their copyright. -COPYRIGHT_HOLDER = Ville Laurikari - -# This is the email address or URL to which the translators shall report -# bugs in the untranslated strings: -# - Strings which are not entire sentences, see the maintainer guidelines -# in the GNU gettext documentation, section 'Preparing Strings'. -# - Strings which use unclear terms or require additional context to be -# understood. -# - Strings which make invalid assumptions about notation of date, time or -# money. -# - Pluralisation problems. -# - Incorrect English spelling. -# - Incorrect formatting. -# It can be your email address, or a mailing list address where translators -# can write to without being subscribed, or the URL of a web page through -# which the translators can contact you. -MSGID_BUGS_ADDRESS = tre-general@lists.laurikari.net - -# This is the list of locale categories, beyond LC_MESSAGES, for which the -# message catalogs shall be used. It is usually empty. -EXTRA_LOCALE_CATEGORIES = - -.SUFFIXES: -.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update - -.po.mo: - @echo "$(MSGFMT) -c -o $@ $<"; \ - $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ - -.po.gmo: - @lang=`echo $* | sed -e 's,.*/,,'`; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \ - cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo - -.sin.sed: - sed -e '/^#/d' $< > t-$@ - mv t-$@ $@ - - -all: check-macro-version all-no - -all-yes: stamp-po -all-no: - -# Ensure that the gettext macros and this Makefile.in.in are in sync. -check-macro-version: - @test "$(GETTEXT_MACRO_VERSION)" = "0.17" \ - || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version 0.17" 1>&2; \ - exit 1; \ - } - -# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no -# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because -# we don't want to bother translators with empty POT files). We assume that -# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. -# In this case, stamp-po is a nop (i.e. a phony target). - -# stamp-po is a timestamp denoting the last time at which the CATALOGS have -# been loosely updated. Its purpose is that when a developer or translator -# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, -# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent -# invocations of "make" will do nothing. This timestamp would not be necessary -# if updating the $(CATALOGS) would always touch them; however, the rule for -# $(POFILES) has been designed to not touch files that don't need to be -# changed. -stamp-po: $(srcdir)/$(DOMAIN).pot - test ! -f $(srcdir)/$(DOMAIN).pot || \ - test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) - @test ! -f $(srcdir)/$(DOMAIN).pot || { \ - echo "touch stamp-po" && \ - echo timestamp > stamp-poT && \ - mv stamp-poT stamp-po; \ - } - -# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', -# otherwise packages like GCC can not be built if only parts of the source -# have been downloaded. - -# This target rebuilds $(DOMAIN).pot; it is an expensive operation. -# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. -$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed - if LC_ALL=C grep 'GNU tre' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \ - package_gnu='GNU '; \ - else \ - package_gnu=''; \ - fi; \ - if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ - msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ - else \ - msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ - fi; \ - case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - *) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --package-name="$${package_gnu}tre" \ - --package-version='0.8.0' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - esac - test ! -f $(DOMAIN).po || { \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ - sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ - if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ - else \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - else \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - } - -# This rule has no dependencies: we don't need to update $(DOMAIN).pot at -# every "make" invocation, only create it when it is missing. -# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. -$(srcdir)/$(DOMAIN).pot: - $(MAKE) $(DOMAIN).pot-update - -# This target rebuilds a PO file if $(DOMAIN).pot has changed. -# Note that a PO file is not touched if it doesn't need to be changed. -$(POFILES): $(srcdir)/$(DOMAIN).pot - @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ - if test -f "$(srcdir)/$${lang}.po"; then \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \ - cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \ - else \ - $(MAKE) $${lang}.po-create; \ - fi - - -install: install-exec install-data -install-exec: -install-data: install-data-no - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - for file in $(DISTFILES.common) Makevars.template; do \ - $(INSTALL_DATA) $(srcdir)/$$file \ - $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - for file in Makevars; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -install-data-no: all -install-data-yes: all - $(mkdir_p) $(DESTDIR)$(datadir) - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ - $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ - echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ - fi; \ - done; \ - done - -install-strip: install - -installdirs: installdirs-exec installdirs-data -installdirs-exec: -installdirs-data: installdirs-data-no - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - else \ - : ; \ - fi -installdirs-data-no: -installdirs-data-yes: - $(mkdir_p) $(DESTDIR)$(datadir) - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - fi; \ - done; \ - done - -# Define this as empty until I found a useful application. -installcheck: - -uninstall: uninstall-exec uninstall-data -uninstall-exec: -uninstall-data: uninstall-data-no - if test "$(PACKAGE)" = "gettext-tools"; then \ - for file in $(DISTFILES.common) Makevars.template; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -uninstall-data-no: -uninstall-data-yes: - catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - done; \ - done - -check: all - -info dvi ps pdf html tags TAGS ctags CTAGS ID: - -mostlyclean: - rm -f remove-potcdate.sed - rm -f stamp-poT - rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po - rm -fr *.o - -clean: mostlyclean - -distclean: clean - rm -f Makefile Makefile.in POTFILES *.mo - -maintainer-clean: distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - rm -f stamp-po $(GMOFILES) - -distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) -dist distdir: - $(MAKE) update-po - @$(MAKE) dist2 -# This is a separate target because 'update-po' must be executed before. -dist2: stamp-po $(DISTFILES) - dists="$(DISTFILES)"; \ - if test "$(PACKAGE)" = "gettext-tools"; then \ - dists="$$dists Makevars.template"; \ - fi; \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - dists="$$dists $(DOMAIN).pot stamp-po"; \ - fi; \ - if test -f $(srcdir)/ChangeLog; then \ - dists="$$dists ChangeLog"; \ - fi; \ - for i in 0 1 2 3 4 5 6 7 8 9; do \ - if test -f $(srcdir)/ChangeLog.$$i; then \ - dists="$$dists ChangeLog.$$i"; \ - fi; \ - done; \ - if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ - for file in $$dists; do \ - if test -f $$file; then \ - cp -p $$file $(distdir) || exit 1; \ - else \ - cp -p $(srcdir)/$$file $(distdir) || exit 1; \ - fi; \ - done - -update-po: Makefile - $(MAKE) $(DOMAIN).pot-update - test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) - $(MAKE) update-gmo - -# General rule for creating PO files. - -.nop.po-create: - @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ - echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ - exit 1 - -# General rule for updating PO files. - -.nop.po-update: - @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ - if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ - cd $(srcdir); \ - if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "msgmerge for $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -$(DUMMYPOFILES): - -update-gmo: Makefile $(GMOFILES) - @: - -Makefile: Makefile.in.in Makevars $(top_builddir)/config.status POTFILES.in LINGUAS - cd $(top_builddir) \ - && $(SHELL) ./config.status $(subdir)/$@.in po-directories - -force: - -# Tell versions [3.59,3.63) of GNU make not to export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: -# Special Makefile rules for English message catalogs with quotation marks. - -DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot - -.SUFFIXES: .insert-header .po-update-en - -en@quot.po-create: - $(MAKE) en@quot.po-update -en@boldquot.po-create: - $(MAKE) en@boldquot.po-update - -en@quot.po-update: en@quot.po-update-en -en@boldquot.po-update: en@boldquot.po-update-en - -.insert-header.po-update-en: - @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ - if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - ll=`echo $$lang | sed -e 's/@.*//'`; \ - LC_ALL=C; export LC_ALL; \ - cd $(srcdir); \ - if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "creation of $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -en@quot.insert-header: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header - -en@boldquot.insert-header: insert-header.sin - sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header - -mostlyclean: mostlyclean-quot -mostlyclean-quot: - rm -f *.insert-header diff --git a/po/Makefile.in b/po/Makefile.in deleted file mode 100644 index 5afd25518a560..0000000000000 --- a/po/Makefile.in +++ /dev/null @@ -1,429 +0,0 @@ -# Makefile for PO directory in any package using GNU gettext. -# Copyright (C) 1995-1997, 2000-2007 by Ulrich Drepper -# -# This file can be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU General Public -# License but which still want to provide support for the GNU gettext -# functionality. -# Please note that the actual code of GNU gettext is covered by the GNU -# General Public License and is *not* in the public domain. -# -# Origin: gettext-0.17 -GETTEXT_MACRO_VERSION = 0.17 - -PACKAGE = tre -VERSION = 0.8.0 -PACKAGE_BUGREPORT = tre-general@lists.laurikari.net - -SHELL = /bin/sh - - -srcdir = . -top_srcdir = .. - - -prefix = /usr/local -exec_prefix = ${prefix} -datarootdir = ${prefix}/share -datadir = ${datarootdir} -localedir = ${datarootdir}/locale -gettextsrcdir = $(datadir)/gettext/po - -INSTALL = /usr/bin/install -c -INSTALL_DATA = ${INSTALL} -m 644 - -# We use $(mkdir_p). -# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as -# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, -# $(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh does not start with $(SHELL), so we add it. -# In automake >= 1.10, $(top_builddir)/utils/install-sh -c -d is derived from ${MKDIR_P}, which is defined -# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake -# versions, $(mkinstalldirs) and $(install_sh) are unused. -mkinstalldirs = $(SHELL) $(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh -d -install_sh = $(SHELL) $(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh -MKDIR_P = ../utils/install-sh -c -d -mkdir_p = $(top_builddir)/utils/install-sh -c -d - -GMSGFMT_ = /usr/local/bin/msgfmt -GMSGFMT_no = /usr/local/bin/msgfmt -GMSGFMT_yes = /usr/local/bin/msgfmt -GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) -MSGFMT_ = /usr/local/bin/msgfmt -MSGFMT_no = /usr/local/bin/msgfmt -MSGFMT_yes = /usr/local/bin/msgfmt -MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) -XGETTEXT_ = /usr/local/bin/xgettext -XGETTEXT_no = /usr/local/bin/xgettext -XGETTEXT_yes = /usr/local/bin/xgettext -XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) -MSGMERGE = msgmerge -MSGMERGE_UPDATE = /usr/local/bin/msgmerge --update -MSGINIT = msginit -MSGCONV = msgconv -MSGFILTER = msgfilter - -POFILES = @POFILES@ -GMOFILES = @GMOFILES@ -UPDATEPOFILES = @UPDATEPOFILES@ -DUMMYPOFILES = @DUMMYPOFILES@ -DISTFILES.common = Makefile.in.in remove-potcdate.sin \ -$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) -DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ -$(POFILES) $(GMOFILES) \ -$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) - -POTFILES = \ - -CATALOGS = @CATALOGS@ - -# Makevars gets inserted here. (Don't remove this line!) - -.SUFFIXES: -.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update - -.po.mo: - @echo "$(MSGFMT) -c -o $@ $<"; \ - $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ - -.po.gmo: - @lang=`echo $* | sed -e 's,.*/,,'`; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \ - cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo - -.sin.sed: - sed -e '/^#/d' $< > t-$@ - mv t-$@ $@ - - -all: check-macro-version all-no - -all-yes: stamp-po -all-no: - -# Ensure that the gettext macros and this Makefile.in.in are in sync. -check-macro-version: - @test "$(GETTEXT_MACRO_VERSION)" = "0.17" \ - || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version 0.17" 1>&2; \ - exit 1; \ - } - -# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no -# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because -# we don't want to bother translators with empty POT files). We assume that -# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. -# In this case, stamp-po is a nop (i.e. a phony target). - -# stamp-po is a timestamp denoting the last time at which the CATALOGS have -# been loosely updated. Its purpose is that when a developer or translator -# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, -# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent -# invocations of "make" will do nothing. This timestamp would not be necessary -# if updating the $(CATALOGS) would always touch them; however, the rule for -# $(POFILES) has been designed to not touch files that don't need to be -# changed. -stamp-po: $(srcdir)/$(DOMAIN).pot - test ! -f $(srcdir)/$(DOMAIN).pot || \ - test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) - @test ! -f $(srcdir)/$(DOMAIN).pot || { \ - echo "touch stamp-po" && \ - echo timestamp > stamp-poT && \ - mv stamp-poT stamp-po; \ - } - -# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', -# otherwise packages like GCC can not be built if only parts of the source -# have been downloaded. - -# This target rebuilds $(DOMAIN).pot; it is an expensive operation. -# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. -$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed - if LC_ALL=C grep 'GNU tre' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \ - package_gnu='GNU '; \ - else \ - package_gnu=''; \ - fi; \ - if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ - msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ - else \ - msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ - fi; \ - case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - *) \ - $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ - --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \ - --files-from=$(srcdir)/POTFILES.in \ - --copyright-holder='$(COPYRIGHT_HOLDER)' \ - --package-name="$${package_gnu}tre" \ - --package-version='0.8.0' \ - --msgid-bugs-address="$$msgid_bugs_address" \ - ;; \ - esac - test ! -f $(DOMAIN).po || { \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ - sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ - if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ - else \ - rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - else \ - mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ - fi; \ - } - -# This rule has no dependencies: we don't need to update $(DOMAIN).pot at -# every "make" invocation, only create it when it is missing. -# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. -$(srcdir)/$(DOMAIN).pot: - $(MAKE) $(DOMAIN).pot-update - -# This target rebuilds a PO file if $(DOMAIN).pot has changed. -# Note that a PO file is not touched if it doesn't need to be changed. -$(POFILES): $(srcdir)/$(DOMAIN).pot - @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ - if test -f "$(srcdir)/$${lang}.po"; then \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \ - cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \ - else \ - $(MAKE) $${lang}.po-create; \ - fi - - -install: install-exec install-data -install-exec: -install-data: install-data-no - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - for file in $(DISTFILES.common) Makevars.template; do \ - $(INSTALL_DATA) $(srcdir)/$$file \ - $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - for file in Makevars; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -install-data-no: all -install-data-yes: all - $(mkdir_p) $(DESTDIR)$(datadir) - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ - $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ - echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ - cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ - fi; \ - done; \ - done - -install-strip: install - -installdirs: installdirs-exec installdirs-data -installdirs-exec: -installdirs-data: installdirs-data-no - if test "$(PACKAGE)" = "gettext-tools"; then \ - $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ - else \ - : ; \ - fi -installdirs-data-no: -installdirs-data-yes: - $(mkdir_p) $(DESTDIR)$(datadir) - @catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - dir=$(localedir)/$$lang/LC_MESSAGES; \ - $(mkdir_p) $(DESTDIR)$$dir; \ - for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ - if test -n "$$lc"; then \ - if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ - link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ - mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ - for file in *; do \ - if test -f $$file; then \ - ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ - fi; \ - done); \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ - else \ - if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ - :; \ - else \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ - mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ - fi; \ - fi; \ - fi; \ - done; \ - done - -# Define this as empty until I found a useful application. -installcheck: - -uninstall: uninstall-exec uninstall-data -uninstall-exec: -uninstall-data: uninstall-data-no - if test "$(PACKAGE)" = "gettext-tools"; then \ - for file in $(DISTFILES.common) Makevars.template; do \ - rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ - done; \ - else \ - : ; \ - fi -uninstall-data-no: -uninstall-data-yes: - catalogs='$(CATALOGS)'; \ - for cat in $$catalogs; do \ - cat=`basename $$cat`; \ - lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ - for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ - rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ - done; \ - done - -check: all - -info dvi ps pdf html tags TAGS ctags CTAGS ID: - -mostlyclean: - rm -f remove-potcdate.sed - rm -f stamp-poT - rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po - rm -fr *.o - -clean: mostlyclean - -distclean: clean - rm -f Makefile Makefile.in POTFILES *.mo - -maintainer-clean: distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - rm -f stamp-po $(GMOFILES) - -distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) -dist distdir: - $(MAKE) update-po - @$(MAKE) dist2 -# This is a separate target because 'update-po' must be executed before. -dist2: stamp-po $(DISTFILES) - dists="$(DISTFILES)"; \ - if test "$(PACKAGE)" = "gettext-tools"; then \ - dists="$$dists Makevars.template"; \ - fi; \ - if test -f $(srcdir)/$(DOMAIN).pot; then \ - dists="$$dists $(DOMAIN).pot stamp-po"; \ - fi; \ - if test -f $(srcdir)/ChangeLog; then \ - dists="$$dists ChangeLog"; \ - fi; \ - for i in 0 1 2 3 4 5 6 7 8 9; do \ - if test -f $(srcdir)/ChangeLog.$$i; then \ - dists="$$dists ChangeLog.$$i"; \ - fi; \ - done; \ - if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ - for file in $$dists; do \ - if test -f $$file; then \ - cp -p $$file $(distdir) || exit 1; \ - else \ - cp -p $(srcdir)/$$file $(distdir) || exit 1; \ - fi; \ - done - -update-po: Makefile - $(MAKE) $(DOMAIN).pot-update - test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) - $(MAKE) update-gmo - -# General rule for creating PO files. - -.nop.po-create: - @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ - echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ - exit 1 - -# General rule for updating PO files. - -.nop.po-update: - @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ - if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ - tmpdir=`pwd`; \ - echo "$$lang:"; \ - test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ - echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ - cd $(srcdir); \ - if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \ - if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ - rm -f $$tmpdir/$$lang.new.po; \ - else \ - if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ - :; \ - else \ - echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ - exit 1; \ - fi; \ - fi; \ - else \ - echo "msgmerge for $$lang.po failed!" 1>&2; \ - rm -f $$tmpdir/$$lang.new.po; \ - fi - -$(DUMMYPOFILES): - -update-gmo: Makefile $(GMOFILES) - @: - -Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ - cd $(top_builddir) \ - && $(SHELL) ./config.status $(subdir)/$@.in po-directories - -force: - -# Tell versions [3.59,3.63) of GNU make not to export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/po/POTFILES b/po/POTFILES deleted file mode 100644 index 4a5679913492b..0000000000000 --- a/po/POTFILES +++ /dev/null @@ -1,2 +0,0 @@ - ../lib/regerror.c \ - ../src/agrep.c diff --git a/src/Makefile b/src/Makefile deleted file mode 100644 index 02abebc682edc..0000000000000 --- a/src/Makefile +++ /dev/null @@ -1,511 +0,0 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. -# src/Makefile. Generated from Makefile.in by configure. - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - - -pkgdatadir = $(datadir)/tre -pkglibdir = $(libdir)/tre -pkgincludedir = $(includedir)/tre -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = x86_64-unknown-freebsd8.0 -host_triplet = x86_64-unknown-freebsd8.0 -target_triplet = x86_64-unknown-freebsd8.0 -bin_PROGRAMS = agrep$(EXEEXT) -subdir = src -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/ac_libtool_tags.m4 \ - $(top_srcdir)/m4/ax_check_funcs_comp.m4 \ - $(top_srcdir)/m4/ax_check_sign.m4 \ - $(top_srcdir)/m4/ax_decl_wchar_max.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \ - $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ - $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/m4/vl_prog_cc_warnings.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/utils/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h \ - $(top_builddir)/lib/tre-config.h -CONFIG_CLEAN_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -PROGRAMS = $(bin_PROGRAMS) -am__agrep_SOURCES_DIST = agrep.c -am_agrep_OBJECTS = agrep-agrep.$(OBJEXT) -agrep_OBJECTS = $(am_agrep_OBJECTS) -am__DEPENDENCIES_1 = -agrep_DEPENDENCIES = ../lib/libtre.la \ - $(am__DEPENDENCIES_1) -agrep_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=link $(CCLD) $(agrep_CFLAGS) $(CFLAGS) $(agrep_LDFLAGS) \ - $(LDFLAGS) -o $@ -DEFAULT_INCLUDES = -I. -I$(top_builddir) -I$(top_builddir)/lib -depcomp = $(SHELL) $(top_srcdir)/utils/depcomp -am__depfiles_maybe = depfiles -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -SOURCES = $(agrep_SOURCES) -DIST_SOURCES = $(am__agrep_SOURCES_DIST) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run aclocal-1.10 -ALLOCA = -AMTAR = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run tar -AR = ar -AS = as -AUTOCONF = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoconf -AUTOHEADER = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoheader -AUTOMAKE = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run automake-1.10 -AWK = nawk -CC = gcc -CCDEPMODE = depmode=gcc3 -CFLAGS = -g -O2 -Wall -CPP = gcc -E -CPPFLAGS = -CYGPATH_W = echo -DEFS = -DHAVE_CONFIG_H -DEPDIR = .deps -DLLTOOL = dlltool -DSYMUTIL = -ECHO = echo -ECHO_C = -ECHO_N = -n -ECHO_T = -EGREP = /usr/bin/grep -E -EXEEXT = -GETTEXT_MACRO_VERSION = 0.17 -GMSGFMT = /usr/local/bin/msgfmt -GMSGFMT_015 = /usr/local/bin/msgfmt -GREP = /usr/bin/grep -INSTALL = /usr/bin/install -c -INSTALL_DATA = ${INSTALL} -m 644 -INSTALL_PROGRAM = ${INSTALL} -INSTALL_SCRIPT = ${INSTALL} -INSTALL_STRIP_PROGRAM = $(install_sh) -c -s -INTLLIBS = -INTL_MACOSX_LIBS = -LDFLAGS = -LIBICONV = /usr/local/lib/libiconv.so -Wl,-rpath -Wl,/usr/local/lib -LIBINTL = -LIBOBJS = -LIBS = -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LN_S = ln -s -LTLIBICONV = -L/usr/local/lib -liconv -R/usr/local/lib -LTLIBINTL = -LTLIBOBJS = -MAKEINFO = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run makeinfo -MKDIR_P = ../utils/install-sh -c -d -MSGFMT = /usr/local/bin/msgfmt -MSGFMT_015 = /usr/local/bin/msgfmt -MSGMERGE = /usr/local/bin/msgmerge -NMEDIT = -OBJDUMP = objdump -OBJEXT = o -PACKAGE = tre -PACKAGE_BUGREPORT = tre-general@lists.laurikari.net -PACKAGE_NAME = TRE -PACKAGE_STRING = TRE 0.8.0 -PACKAGE_TARNAME = tre -PACKAGE_VERSION = 0.8.0 -PATH_SEPARATOR = : -POSUB = -RANLIB = ranlib -SED = /usr/local/bin/gsed -SET_MAKE = -SHELL = /bin/sh -STRIP = strip -TRE_VERSION = 0.8.0 -USE_NLS = no -VERSION = 0.8.0 -XGETTEXT = /usr/local/bin/xgettext -XGETTEXT_015 = /usr/local/bin/xgettext -XGETTEXT_EXTRA_OPTIONS = -abs_builddir = /home/gabor/wrk/tre/tre-0.8.0/src -abs_srcdir = /home/gabor/wrk/tre/tre-0.8.0/src -abs_top_builddir = /home/gabor/wrk/tre/tre-0.8.0 -abs_top_srcdir = /home/gabor/wrk/tre/tre-0.8.0 -ac_ct_CC = gcc -am__include = include -am__leading_dot = . -am__quote = -am__tar = ${AMTAR} chof - "$$tardir" -am__untar = ${AMTAR} xf - -bindir = ${exec_prefix}/bin -build = x86_64-unknown-freebsd8.0 -build_alias = -build_cpu = x86_64 -build_os = freebsd8.0 -build_vendor = unknown -builddir = . -datadir = ${datarootdir} -datarootdir = ${prefix}/share -docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} -dvidir = ${docdir} -exec_prefix = ${prefix} -host = x86_64-unknown-freebsd8.0 -host_alias = -host_cpu = x86_64 -host_os = freebsd8.0 -host_vendor = unknown -htmldir = ${docdir} -includedir = ${prefix}/include -infodir = ${datarootdir}/info -install_sh = $(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh -libdir = ${exec_prefix}/lib -libexecdir = ${exec_prefix}/libexec -localedir = $(datadir)/locale -localstatedir = ${prefix}/var -mandir = ${datarootdir}/man -mkdir_p = $(top_builddir)/utils/install-sh -c -d -oldincludedir = /usr/include -pdfdir = ${docdir} -prefix = /usr/local -program_transform_name = s,x,x, -psdir = ${docdir} -sbindir = ${exec_prefix}/sbin -sharedstatedir = ${prefix}/com -srcdir = . -sysconfdir = ${prefix}/etc -target = x86_64-unknown-freebsd8.0 -target_alias = -target_cpu = x86_64 -target_os = freebsd8.0 -target_vendor = unknown -top_builddir = .. -top_srcdir = .. -INCLUDES = -I$(top_srcdir)/lib -agrep_SOURCES = agrep.c -agrep_LDADD = ../lib/libtre.la $(LTLIBINTL) -agrep_CFLAGS = -DLOCALEDIR=\"$(localedir)\" -#agrep_LDFLAGS = -static -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign src/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ - else :; fi; \ - done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ - rm -f "$(DESTDIR)$(bindir)/$$f"; \ - done - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -agrep$(EXEEXT): $(agrep_OBJECTS) $(agrep_DEPENDENCIES) - @rm -f agrep$(EXEEXT) - $(agrep_LINK) $(agrep_OBJECTS) $(agrep_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -include ./$(DEPDIR)/agrep-agrep.Po - -.c.o: - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -# source='$<' object='$@' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(COMPILE) -c $< - -.c.obj: - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -# source='$<' object='$@' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(COMPILE) -c `$(CYGPATH_W) '$<'` - -.c.lo: - $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -# source='$<' object='$@' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LTCOMPILE) -c -o $@ $< - -agrep-agrep.o: agrep.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(agrep_CFLAGS) $(CFLAGS) -MT agrep-agrep.o -MD -MP -MF $(DEPDIR)/agrep-agrep.Tpo -c -o agrep-agrep.o `test -f 'agrep.c' || echo '$(srcdir)/'`agrep.c - mv -f $(DEPDIR)/agrep-agrep.Tpo $(DEPDIR)/agrep-agrep.Po -# source='agrep.c' object='agrep-agrep.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(agrep_CFLAGS) $(CFLAGS) -c -o agrep-agrep.o `test -f 'agrep.c' || echo '$(srcdir)/'`agrep.c - -agrep-agrep.obj: agrep.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(agrep_CFLAGS) $(CFLAGS) -MT agrep-agrep.obj -MD -MP -MF $(DEPDIR)/agrep-agrep.Tpo -c -o agrep-agrep.obj `if test -f 'agrep.c'; then $(CYGPATH_W) 'agrep.c'; else $(CYGPATH_W) '$(srcdir)/agrep.c'; fi` - mv -f $(DEPDIR)/agrep-agrep.Tpo $(DEPDIR)/agrep-agrep.Po -# source='agrep.c' object='agrep-agrep.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(agrep_CFLAGS) $(CFLAGS) -c -o agrep-agrep.obj `if test -f 'agrep.c'; then $(CYGPATH_W) 'agrep.c'; else $(CYGPATH_W) '$(srcdir)/agrep.c'; fi` - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) -installdirs: - for dir in "$(DESTDIR)$(bindir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-exec-am: install-binPROGRAMS - -install-html: install-html-am - -install-info: install-info-am - -install-man: - -install-pdf: install-pdf-am - -install-ps: install-ps-am - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS - -.MAKE: install-am install-strip - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ - clean-generic clean-libtool ctags distclean distclean-compile \ - distclean-generic distclean-libtool distclean-tags distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-binPROGRAMS install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - pdf pdf-am ps ps-am tags uninstall uninstall-am \ - uninstall-binPROGRAMS - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/stamp-h1 b/stamp-h1 deleted file mode 100644 index 4547fe1b5efa9..0000000000000 --- a/stamp-h1 +++ /dev/null @@ -1 +0,0 @@ -timestamp for config.h diff --git a/tests/Makefile b/tests/Makefile deleted file mode 100644 index e9ba1b14cc3b3..0000000000000 --- a/tests/Makefile +++ /dev/null @@ -1,910 +0,0 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. -# tests/Makefile. Generated from Makefile.in by configure. - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -pkgdatadir = $(datadir)/tre -pkglibdir = $(libdir)/tre -pkgincludedir = $(includedir)/tre -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = x86_64-unknown-freebsd8.0 -host_triplet = x86_64-unknown-freebsd8.0 -target_triplet = x86_64-unknown-freebsd8.0 -check_PROGRAMS = retest$(EXEEXT) randtest$(EXEEXT) \ - test-str-source$(EXEEXT) $(am__EXEEXT_1) -EXTRA_PROGRAMS = bench$(EXEEXT) -am__append_1 = wretest -am__append_2 = ../lib/tre-match-approx.c -TESTS = test-str-source$(EXEEXT) retest$(EXEEXT) $(am__EXEEXT_1) -am__append_3 = wretest -subdir = tests -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/ac_libtool_tags.m4 \ - $(top_srcdir)/m4/ax_check_funcs_comp.m4 \ - $(top_srcdir)/m4/ax_check_sign.m4 \ - $(top_srcdir)/m4/ax_decl_wchar_max.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \ - $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ - $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/m4/vl_prog_cc_warnings.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/utils/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h \ - $(top_builddir)/lib/tre-config.h -CONFIG_CLEAN_FILES = -libxtre_la_LIBADD = -am__libxtre_la_SOURCES_DIST = ../lib/tre-mem.c ../lib/tre-stack.c \ - ../lib/tre-ast.c ../lib/tre-parse.c ../lib/tre-compile.c \ - ../lib/tre-match-parallel.c ../lib/tre-match-backtrack.c \ - ../lib/regcomp.c ../lib/regexec.c ../lib/regerror.c \ - ../lib/xmalloc.c ../lib/tre-match-approx.c -am__objects_1 = libxtre_la-tre-match-approx.lo -am_libxtre_la_OBJECTS = libxtre_la-tre-mem.lo \ - libxtre_la-tre-stack.lo libxtre_la-tre-ast.lo \ - libxtre_la-tre-parse.lo \ - libxtre_la-tre-compile.lo \ - libxtre_la-tre-match-parallel.lo \ - libxtre_la-tre-match-backtrack.lo \ - libxtre_la-regcomp.lo libxtre_la-regexec.lo \ - libxtre_la-regerror.lo libxtre_la-xmalloc.lo \ - $(am__objects_1) -libxtre_la_OBJECTS = $(am_libxtre_la_OBJECTS) -libxtre_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(libxtre_la_CFLAGS) \ - $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -am_libxtre_la_rpath = -am__EXEEXT_1 = wretest$(EXEEXT) -am_bench_OBJECTS = bench.$(OBJEXT) -bench_OBJECTS = $(am_bench_OBJECTS) -am__DEPENDENCIES_1 = -am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) -bench_DEPENDENCIES = ../lib/libtre.la $(am__DEPENDENCIES_2) -am_randtest_OBJECTS = randtest-randtest.$(OBJEXT) -randtest_OBJECTS = $(am_randtest_OBJECTS) -randtest_DEPENDENCIES = libxtre.la \ - $(am__DEPENDENCIES_2) -#randtest_DEPENDENCIES = ../lib/libtre.la \ -# $(am__DEPENDENCIES_2) -randtest_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=link $(CCLD) $(randtest_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -am_retest_OBJECTS = retest-retest.$(OBJEXT) -retest_OBJECTS = $(am_retest_OBJECTS) -retest_DEPENDENCIES = libxtre.la \ - $(am__DEPENDENCIES_2) -#retest_DEPENDENCIES = ../lib/libtre.la \ -# $(am__DEPENDENCIES_2) -retest_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=link $(CCLD) $(retest_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -am_test_str_source_OBJECTS = test-str-source.$(OBJEXT) -test_str_source_OBJECTS = $(am_test_str_source_OBJECTS) -test_str_source_DEPENDENCIES = ../lib/libtre.la $(am__DEPENDENCIES_2) -am__wretest_SOURCES_DIST = retest.c -am_wretest_OBJECTS = wretest-retest.$(OBJEXT) -wretest_OBJECTS = $(am_wretest_OBJECTS) -wretest_DEPENDENCIES = \ - libxtre.la \ - $(am__DEPENDENCIES_2) -#wretest_DEPENDENCIES = \ -# ../lib/libtre.la \ -# $(am__DEPENDENCIES_2) -wretest_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=link $(CCLD) $(wretest_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -DEFAULT_INCLUDES = -I. -I$(top_builddir) -I$(top_builddir)/lib -depcomp = $(SHELL) $(top_srcdir)/utils/depcomp -am__depfiles_maybe = depfiles -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ - --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -SOURCES = $(libxtre_la_SOURCES) $(bench_SOURCES) $(randtest_SOURCES) \ - $(retest_SOURCES) $(test_str_source_SOURCES) \ - $(wretest_SOURCES) -DIST_SOURCES = $(am__libxtre_la_SOURCES_DIST) $(bench_SOURCES) \ - $(randtest_SOURCES) $(retest_SOURCES) \ - $(test_str_source_SOURCES) $(am__wretest_SOURCES_DIST) -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run aclocal-1.10 -ALLOCA = -AMTAR = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run tar -AR = ar -AS = as -AUTOCONF = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoconf -AUTOHEADER = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoheader -AUTOMAKE = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run automake-1.10 -AWK = nawk -CC = gcc -CCDEPMODE = depmode=gcc3 -CFLAGS = -g -O2 -Wall -CPP = gcc -E -CPPFLAGS = -CYGPATH_W = echo -DEFS = -DHAVE_CONFIG_H -DEPDIR = .deps -DLLTOOL = dlltool -DSYMUTIL = -ECHO = echo -ECHO_C = -ECHO_N = -n -ECHO_T = -EGREP = /usr/bin/grep -E -EXEEXT = -GETTEXT_MACRO_VERSION = 0.17 -GMSGFMT = /usr/local/bin/msgfmt -GMSGFMT_015 = /usr/local/bin/msgfmt -GREP = /usr/bin/grep -INSTALL = /usr/bin/install -c -INSTALL_DATA = ${INSTALL} -m 644 -INSTALL_PROGRAM = ${INSTALL} -INSTALL_SCRIPT = ${INSTALL} -INSTALL_STRIP_PROGRAM = $(install_sh) -c -s -INTLLIBS = -INTL_MACOSX_LIBS = -LDFLAGS = -LIBICONV = /usr/local/lib/libiconv.so -Wl,-rpath -Wl,/usr/local/lib -LIBINTL = -LIBOBJS = -LIBS = -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LN_S = ln -s -LTLIBICONV = -L/usr/local/lib -liconv -R/usr/local/lib -LTLIBINTL = -LTLIBOBJS = -MAKEINFO = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run makeinfo -MKDIR_P = ../utils/install-sh -c -d -MSGFMT = /usr/local/bin/msgfmt -MSGFMT_015 = /usr/local/bin/msgfmt -MSGMERGE = /usr/local/bin/msgmerge -NMEDIT = -OBJDUMP = objdump -OBJEXT = o -PACKAGE = tre -PACKAGE_BUGREPORT = tre-general@lists.laurikari.net -PACKAGE_NAME = TRE -PACKAGE_STRING = TRE 0.8.0 -PACKAGE_TARNAME = tre -PACKAGE_VERSION = 0.8.0 -PATH_SEPARATOR = : -POSUB = -RANLIB = ranlib -SED = /usr/local/bin/gsed -SET_MAKE = -SHELL = /bin/sh -STRIP = strip -TRE_VERSION = 0.8.0 -USE_NLS = no -VERSION = 0.8.0 -XGETTEXT = /usr/local/bin/xgettext -XGETTEXT_015 = /usr/local/bin/xgettext -XGETTEXT_EXTRA_OPTIONS = -abs_builddir = /home/gabor/wrk/tre/tre-0.8.0/tests -abs_srcdir = /home/gabor/wrk/tre/tre-0.8.0/tests -abs_top_builddir = /home/gabor/wrk/tre/tre-0.8.0 -abs_top_srcdir = /home/gabor/wrk/tre/tre-0.8.0 -ac_ct_CC = gcc -am__include = include -am__leading_dot = . -am__quote = -am__tar = ${AMTAR} chof - "$$tardir" -am__untar = ${AMTAR} xf - -bindir = ${exec_prefix}/bin -build = x86_64-unknown-freebsd8.0 -build_alias = -build_cpu = x86_64 -build_os = freebsd8.0 -build_vendor = unknown -builddir = . -datadir = ${datarootdir} -datarootdir = ${prefix}/share -docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} -dvidir = ${docdir} -exec_prefix = ${prefix} -host = x86_64-unknown-freebsd8.0 -host_alias = -host_cpu = x86_64 -host_os = freebsd8.0 -host_vendor = unknown -htmldir = ${docdir} -includedir = ${prefix}/include -infodir = ${datarootdir}/info -install_sh = $(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh -libdir = ${exec_prefix}/lib -libexecdir = ${exec_prefix}/libexec -localedir = ${datarootdir}/locale -localstatedir = ${prefix}/var -mandir = ${datarootdir}/man -mkdir_p = $(top_builddir)/utils/install-sh -c -d -oldincludedir = /usr/include -pdfdir = ${docdir} -prefix = /usr/local -program_transform_name = s,x,x, -psdir = ${docdir} -sbindir = ${exec_prefix}/sbin -sharedstatedir = ${prefix}/com -srcdir = . -sysconfdir = ${prefix}/etc -target = x86_64-unknown-freebsd8.0 -target_alias = -target_cpu = x86_64 -target_os = freebsd8.0 -target_vendor = unknown -top_builddir = .. -top_srcdir = .. -SUBDIRS = agrep -LDADD = $(LTLIBINTL) -retest_SOURCES = retest.c -wretest_SOURCES = retest.c -wretest_CPPFLAGS = -DWRETEST $(AM_CPPFLAGS) -randtest_SOURCES = randtest.c -bench_SOURCES = bench.c -bench_LDADD = ../lib/libtre.la $(LDADD) -lm -test_str_source_SOURCES = test-str-source.c -test_str_source_LDADD = ../lib/libtre.la $(LDADD) -lm -retest_LDADD = libxtre.la $(LDADD) -#retest_LDADD = ../lib/libtre.la $(LDADD) -wretest_LDADD = libxtre.la $(LDADD) -#wretest_LDADD = ../lib/libtre.la $(LDADD) -randtest_LDADD = libxtre.la $(LDADD) -#randtest_LDADD = ../lib/libtre.la $(LDADD) -check_LTLIBRARIES = libxtre.la -libxtre_la_SOURCES = ../lib/tre-mem.c \ - ../lib/tre-stack.c ../lib/tre-ast.c \ - ../lib/tre-parse.c ../lib/tre-compile.c \ - ../lib/tre-match-parallel.c \ - ../lib/tre-match-backtrack.c ../lib/regcomp.c \ - ../lib/regexec.c ../lib/regerror.c \ - ../lib/xmalloc.c $(am__append_2) -libxtre_la_CFLAGS = -DMALLOC_DEBUGGING -retest_CFLAGS = -DMALLOC_DEBUGGING -wretest_CFLAGS = -DMALLOC_DEBUGGING -randtest_CFLAGS = -DMALLOC_DEBUGGING -INCLUDES = -I$(top_srcdir)/lib -EXTRA_DIST = build-tests.sh -all: all-recursive - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign tests/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -clean-checkLTLIBRARIES: - -test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES) - @list='$(check_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test "$$dir" != "$$p" || dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libxtre.la: $(libxtre_la_OBJECTS) $(libxtre_la_DEPENDENCIES) - $(libxtre_la_LINK) $(am_libxtre_la_rpath) $(libxtre_la_OBJECTS) $(libxtre_la_LIBADD) $(LIBS) - -clean-checkPROGRAMS: - @list='$(check_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -bench$(EXEEXT): $(bench_OBJECTS) $(bench_DEPENDENCIES) - @rm -f bench$(EXEEXT) - $(LINK) $(bench_OBJECTS) $(bench_LDADD) $(LIBS) -randtest$(EXEEXT): $(randtest_OBJECTS) $(randtest_DEPENDENCIES) - @rm -f randtest$(EXEEXT) - $(randtest_LINK) $(randtest_OBJECTS) $(randtest_LDADD) $(LIBS) -retest$(EXEEXT): $(retest_OBJECTS) $(retest_DEPENDENCIES) - @rm -f retest$(EXEEXT) - $(retest_LINK) $(retest_OBJECTS) $(retest_LDADD) $(LIBS) -test-str-source$(EXEEXT): $(test_str_source_OBJECTS) $(test_str_source_DEPENDENCIES) - @rm -f test-str-source$(EXEEXT) - $(LINK) $(test_str_source_OBJECTS) $(test_str_source_LDADD) $(LIBS) -wretest$(EXEEXT): $(wretest_OBJECTS) $(wretest_DEPENDENCIES) - @rm -f wretest$(EXEEXT) - $(wretest_LINK) $(wretest_OBJECTS) $(wretest_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -include ./$(DEPDIR)/bench.Po -include ./$(DEPDIR)/libxtre_la-regcomp.Plo -include ./$(DEPDIR)/libxtre_la-regerror.Plo -include ./$(DEPDIR)/libxtre_la-regexec.Plo -include ./$(DEPDIR)/libxtre_la-tre-ast.Plo -include ./$(DEPDIR)/libxtre_la-tre-compile.Plo -include ./$(DEPDIR)/libxtre_la-tre-match-approx.Plo -include ./$(DEPDIR)/libxtre_la-tre-match-backtrack.Plo -include ./$(DEPDIR)/libxtre_la-tre-match-parallel.Plo -include ./$(DEPDIR)/libxtre_la-tre-mem.Plo -include ./$(DEPDIR)/libxtre_la-tre-parse.Plo -include ./$(DEPDIR)/libxtre_la-tre-stack.Plo -include ./$(DEPDIR)/libxtre_la-xmalloc.Plo -include ./$(DEPDIR)/randtest-randtest.Po -include ./$(DEPDIR)/retest-retest.Po -include ./$(DEPDIR)/test-str-source.Po -include ./$(DEPDIR)/wretest-retest.Po - -.c.o: - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -# source='$<' object='$@' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(COMPILE) -c $< - -.c.obj: - $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -# source='$<' object='$@' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(COMPILE) -c `$(CYGPATH_W) '$<'` - -.c.lo: - $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< - mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -# source='$<' object='$@' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LTCOMPILE) -c -o $@ $< - -libxtre_la-tre-mem.lo: ../lib/tre-mem.c - $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -MT libxtre_la-tre-mem.lo -MD -MP -MF $(DEPDIR)/libxtre_la-tre-mem.Tpo -c -o libxtre_la-tre-mem.lo `test -f '../lib/tre-mem.c' || echo '$(srcdir)/'`../lib/tre-mem.c - mv -f $(DEPDIR)/libxtre_la-tre-mem.Tpo $(DEPDIR)/libxtre_la-tre-mem.Plo -# source='../lib/tre-mem.c' object='libxtre_la-tre-mem.lo' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -c -o libxtre_la-tre-mem.lo `test -f '../lib/tre-mem.c' || echo '$(srcdir)/'`../lib/tre-mem.c - -libxtre_la-tre-stack.lo: ../lib/tre-stack.c - $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -MT libxtre_la-tre-stack.lo -MD -MP -MF $(DEPDIR)/libxtre_la-tre-stack.Tpo -c -o libxtre_la-tre-stack.lo `test -f '../lib/tre-stack.c' || echo '$(srcdir)/'`../lib/tre-stack.c - mv -f $(DEPDIR)/libxtre_la-tre-stack.Tpo $(DEPDIR)/libxtre_la-tre-stack.Plo -# source='../lib/tre-stack.c' object='libxtre_la-tre-stack.lo' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -c -o libxtre_la-tre-stack.lo `test -f '../lib/tre-stack.c' || echo '$(srcdir)/'`../lib/tre-stack.c - -libxtre_la-tre-ast.lo: ../lib/tre-ast.c - $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -MT libxtre_la-tre-ast.lo -MD -MP -MF $(DEPDIR)/libxtre_la-tre-ast.Tpo -c -o libxtre_la-tre-ast.lo `test -f '../lib/tre-ast.c' || echo '$(srcdir)/'`../lib/tre-ast.c - mv -f $(DEPDIR)/libxtre_la-tre-ast.Tpo $(DEPDIR)/libxtre_la-tre-ast.Plo -# source='../lib/tre-ast.c' object='libxtre_la-tre-ast.lo' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -c -o libxtre_la-tre-ast.lo `test -f '../lib/tre-ast.c' || echo '$(srcdir)/'`../lib/tre-ast.c - -libxtre_la-tre-parse.lo: ../lib/tre-parse.c - $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -MT libxtre_la-tre-parse.lo -MD -MP -MF $(DEPDIR)/libxtre_la-tre-parse.Tpo -c -o libxtre_la-tre-parse.lo `test -f '../lib/tre-parse.c' || echo '$(srcdir)/'`../lib/tre-parse.c - mv -f $(DEPDIR)/libxtre_la-tre-parse.Tpo $(DEPDIR)/libxtre_la-tre-parse.Plo -# source='../lib/tre-parse.c' object='libxtre_la-tre-parse.lo' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -c -o libxtre_la-tre-parse.lo `test -f '../lib/tre-parse.c' || echo '$(srcdir)/'`../lib/tre-parse.c - -libxtre_la-tre-compile.lo: ../lib/tre-compile.c - $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -MT libxtre_la-tre-compile.lo -MD -MP -MF $(DEPDIR)/libxtre_la-tre-compile.Tpo -c -o libxtre_la-tre-compile.lo `test -f '../lib/tre-compile.c' || echo '$(srcdir)/'`../lib/tre-compile.c - mv -f $(DEPDIR)/libxtre_la-tre-compile.Tpo $(DEPDIR)/libxtre_la-tre-compile.Plo -# source='../lib/tre-compile.c' object='libxtre_la-tre-compile.lo' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -c -o libxtre_la-tre-compile.lo `test -f '../lib/tre-compile.c' || echo '$(srcdir)/'`../lib/tre-compile.c - -libxtre_la-tre-match-parallel.lo: ../lib/tre-match-parallel.c - $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -MT libxtre_la-tre-match-parallel.lo -MD -MP -MF $(DEPDIR)/libxtre_la-tre-match-parallel.Tpo -c -o libxtre_la-tre-match-parallel.lo `test -f '../lib/tre-match-parallel.c' || echo '$(srcdir)/'`../lib/tre-match-parallel.c - mv -f $(DEPDIR)/libxtre_la-tre-match-parallel.Tpo $(DEPDIR)/libxtre_la-tre-match-parallel.Plo -# source='../lib/tre-match-parallel.c' object='libxtre_la-tre-match-parallel.lo' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -c -o libxtre_la-tre-match-parallel.lo `test -f '../lib/tre-match-parallel.c' || echo '$(srcdir)/'`../lib/tre-match-parallel.c - -libxtre_la-tre-match-backtrack.lo: ../lib/tre-match-backtrack.c - $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -MT libxtre_la-tre-match-backtrack.lo -MD -MP -MF $(DEPDIR)/libxtre_la-tre-match-backtrack.Tpo -c -o libxtre_la-tre-match-backtrack.lo `test -f '../lib/tre-match-backtrack.c' || echo '$(srcdir)/'`../lib/tre-match-backtrack.c - mv -f $(DEPDIR)/libxtre_la-tre-match-backtrack.Tpo $(DEPDIR)/libxtre_la-tre-match-backtrack.Plo -# source='../lib/tre-match-backtrack.c' object='libxtre_la-tre-match-backtrack.lo' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -c -o libxtre_la-tre-match-backtrack.lo `test -f '../lib/tre-match-backtrack.c' || echo '$(srcdir)/'`../lib/tre-match-backtrack.c - -libxtre_la-regcomp.lo: ../lib/regcomp.c - $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -MT libxtre_la-regcomp.lo -MD -MP -MF $(DEPDIR)/libxtre_la-regcomp.Tpo -c -o libxtre_la-regcomp.lo `test -f '../lib/regcomp.c' || echo '$(srcdir)/'`../lib/regcomp.c - mv -f $(DEPDIR)/libxtre_la-regcomp.Tpo $(DEPDIR)/libxtre_la-regcomp.Plo -# source='../lib/regcomp.c' object='libxtre_la-regcomp.lo' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -c -o libxtre_la-regcomp.lo `test -f '../lib/regcomp.c' || echo '$(srcdir)/'`../lib/regcomp.c - -libxtre_la-regexec.lo: ../lib/regexec.c - $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -MT libxtre_la-regexec.lo -MD -MP -MF $(DEPDIR)/libxtre_la-regexec.Tpo -c -o libxtre_la-regexec.lo `test -f '../lib/regexec.c' || echo '$(srcdir)/'`../lib/regexec.c - mv -f $(DEPDIR)/libxtre_la-regexec.Tpo $(DEPDIR)/libxtre_la-regexec.Plo -# source='../lib/regexec.c' object='libxtre_la-regexec.lo' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -c -o libxtre_la-regexec.lo `test -f '../lib/regexec.c' || echo '$(srcdir)/'`../lib/regexec.c - -libxtre_la-regerror.lo: ../lib/regerror.c - $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -MT libxtre_la-regerror.lo -MD -MP -MF $(DEPDIR)/libxtre_la-regerror.Tpo -c -o libxtre_la-regerror.lo `test -f '../lib/regerror.c' || echo '$(srcdir)/'`../lib/regerror.c - mv -f $(DEPDIR)/libxtre_la-regerror.Tpo $(DEPDIR)/libxtre_la-regerror.Plo -# source='../lib/regerror.c' object='libxtre_la-regerror.lo' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -c -o libxtre_la-regerror.lo `test -f '../lib/regerror.c' || echo '$(srcdir)/'`../lib/regerror.c - -libxtre_la-xmalloc.lo: ../lib/xmalloc.c - $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -MT libxtre_la-xmalloc.lo -MD -MP -MF $(DEPDIR)/libxtre_la-xmalloc.Tpo -c -o libxtre_la-xmalloc.lo `test -f '../lib/xmalloc.c' || echo '$(srcdir)/'`../lib/xmalloc.c - mv -f $(DEPDIR)/libxtre_la-xmalloc.Tpo $(DEPDIR)/libxtre_la-xmalloc.Plo -# source='../lib/xmalloc.c' object='libxtre_la-xmalloc.lo' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -c -o libxtre_la-xmalloc.lo `test -f '../lib/xmalloc.c' || echo '$(srcdir)/'`../lib/xmalloc.c - -libxtre_la-tre-match-approx.lo: ../lib/tre-match-approx.c - $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -MT libxtre_la-tre-match-approx.lo -MD -MP -MF $(DEPDIR)/libxtre_la-tre-match-approx.Tpo -c -o libxtre_la-tre-match-approx.lo `test -f '../lib/tre-match-approx.c' || echo '$(srcdir)/'`../lib/tre-match-approx.c - mv -f $(DEPDIR)/libxtre_la-tre-match-approx.Tpo $(DEPDIR)/libxtre_la-tre-match-approx.Plo -# source='../lib/tre-match-approx.c' object='libxtre_la-tre-match-approx.lo' libtool=yes \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libxtre_la_CFLAGS) $(CFLAGS) -c -o libxtre_la-tre-match-approx.lo `test -f '../lib/tre-match-approx.c' || echo '$(srcdir)/'`../lib/tre-match-approx.c - -randtest-randtest.o: randtest.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(randtest_CFLAGS) $(CFLAGS) -MT randtest-randtest.o -MD -MP -MF $(DEPDIR)/randtest-randtest.Tpo -c -o randtest-randtest.o `test -f 'randtest.c' || echo '$(srcdir)/'`randtest.c - mv -f $(DEPDIR)/randtest-randtest.Tpo $(DEPDIR)/randtest-randtest.Po -# source='randtest.c' object='randtest-randtest.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(randtest_CFLAGS) $(CFLAGS) -c -o randtest-randtest.o `test -f 'randtest.c' || echo '$(srcdir)/'`randtest.c - -randtest-randtest.obj: randtest.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(randtest_CFLAGS) $(CFLAGS) -MT randtest-randtest.obj -MD -MP -MF $(DEPDIR)/randtest-randtest.Tpo -c -o randtest-randtest.obj `if test -f 'randtest.c'; then $(CYGPATH_W) 'randtest.c'; else $(CYGPATH_W) '$(srcdir)/randtest.c'; fi` - mv -f $(DEPDIR)/randtest-randtest.Tpo $(DEPDIR)/randtest-randtest.Po -# source='randtest.c' object='randtest-randtest.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(randtest_CFLAGS) $(CFLAGS) -c -o randtest-randtest.obj `if test -f 'randtest.c'; then $(CYGPATH_W) 'randtest.c'; else $(CYGPATH_W) '$(srcdir)/randtest.c'; fi` - -retest-retest.o: retest.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(retest_CFLAGS) $(CFLAGS) -MT retest-retest.o -MD -MP -MF $(DEPDIR)/retest-retest.Tpo -c -o retest-retest.o `test -f 'retest.c' || echo '$(srcdir)/'`retest.c - mv -f $(DEPDIR)/retest-retest.Tpo $(DEPDIR)/retest-retest.Po -# source='retest.c' object='retest-retest.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(retest_CFLAGS) $(CFLAGS) -c -o retest-retest.o `test -f 'retest.c' || echo '$(srcdir)/'`retest.c - -retest-retest.obj: retest.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(retest_CFLAGS) $(CFLAGS) -MT retest-retest.obj -MD -MP -MF $(DEPDIR)/retest-retest.Tpo -c -o retest-retest.obj `if test -f 'retest.c'; then $(CYGPATH_W) 'retest.c'; else $(CYGPATH_W) '$(srcdir)/retest.c'; fi` - mv -f $(DEPDIR)/retest-retest.Tpo $(DEPDIR)/retest-retest.Po -# source='retest.c' object='retest-retest.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(retest_CFLAGS) $(CFLAGS) -c -o retest-retest.obj `if test -f 'retest.c'; then $(CYGPATH_W) 'retest.c'; else $(CYGPATH_W) '$(srcdir)/retest.c'; fi` - -wretest-retest.o: retest.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(wretest_CPPFLAGS) $(CPPFLAGS) $(wretest_CFLAGS) $(CFLAGS) -MT wretest-retest.o -MD -MP -MF $(DEPDIR)/wretest-retest.Tpo -c -o wretest-retest.o `test -f 'retest.c' || echo '$(srcdir)/'`retest.c - mv -f $(DEPDIR)/wretest-retest.Tpo $(DEPDIR)/wretest-retest.Po -# source='retest.c' object='wretest-retest.o' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(wretest_CPPFLAGS) $(CPPFLAGS) $(wretest_CFLAGS) $(CFLAGS) -c -o wretest-retest.o `test -f 'retest.c' || echo '$(srcdir)/'`retest.c - -wretest-retest.obj: retest.c - $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(wretest_CPPFLAGS) $(CPPFLAGS) $(wretest_CFLAGS) $(CFLAGS) -MT wretest-retest.obj -MD -MP -MF $(DEPDIR)/wretest-retest.Tpo -c -o wretest-retest.obj `if test -f 'retest.c'; then $(CYGPATH_W) 'retest.c'; else $(CYGPATH_W) '$(srcdir)/retest.c'; fi` - mv -f $(DEPDIR)/wretest-retest.Tpo $(DEPDIR)/wretest-retest.Po -# source='retest.c' object='wretest-retest.obj' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(wretest_CPPFLAGS) $(CPPFLAGS) $(wretest_CFLAGS) $(CFLAGS) -c -o wretest-retest.obj `if test -f 'retest.c'; then $(CYGPATH_W) 'retest.c'; else $(CYGPATH_W) '$(srcdir)/retest.c'; fi` - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -check-TESTS: $(TESTS) - @failed=0; all=0; xfail=0; xpass=0; skip=0; ws='[ ]'; \ - srcdir=$(srcdir); export srcdir; \ - list=' $(TESTS) '; \ - if test -n "$$list"; then \ - for tst in $$list; do \ - if test -f ./$$tst; then dir=./; \ - elif test -f $$tst; then dir=; \ - else dir="$(srcdir)/"; fi; \ - if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *$$ws$$tst$$ws*) \ - xpass=`expr $$xpass + 1`; \ - failed=`expr $$failed + 1`; \ - echo "XPASS: $$tst"; \ - ;; \ - *) \ - echo "PASS: $$tst"; \ - ;; \ - esac; \ - elif test $$? -ne 77; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *$$ws$$tst$$ws*) \ - xfail=`expr $$xfail + 1`; \ - echo "XFAIL: $$tst"; \ - ;; \ - *) \ - failed=`expr $$failed + 1`; \ - echo "FAIL: $$tst"; \ - ;; \ - esac; \ - else \ - skip=`expr $$skip + 1`; \ - echo "SKIP: $$tst"; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - if test "$$xfail" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="All $$all tests behaved as expected ($$xfail expected failures)"; \ - fi; \ - else \ - if test "$$xpass" -eq 0; then \ - banner="$$failed of $$all tests failed"; \ - else \ - banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \ - fi; \ - fi; \ - dashes="$$banner"; \ - skipped=""; \ - if test "$$skip" -ne 0; then \ - skipped="($$skip tests were not run)"; \ - test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$skipped"; \ - fi; \ - report=""; \ - if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ - report="Please report to $(PACKAGE_BUGREPORT)"; \ - test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$report"; \ - fi; \ - dashes=`echo "$$dashes" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - test -z "$$skipped" || echo "$$skipped"; \ - test -z "$$report" || echo "$$report"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - else :; fi - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) $(check_LTLIBRARIES) $(check_PROGRAMS) - $(MAKE) $(AM_MAKEFLAGS) check-TESTS -check: check-recursive -all-am: Makefile -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \ - clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-exec-am: - -install-html: install-html-recursive - -install-info: install-info-recursive - -install-man: - -install-pdf: install-pdf-recursive - -install-ps: install-ps-recursive - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-TESTS check-am clean \ - clean-checkLTLIBRARIES clean-checkPROGRAMS clean-generic \ - clean-libtool ctags ctags-recursive distclean \ - distclean-compile distclean-generic distclean-libtool \ - distclean-tags distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/tests/agrep/Makefile b/tests/agrep/Makefile deleted file mode 100644 index 14553e6c2b9ec..0000000000000 --- a/tests/agrep/Makefile +++ /dev/null @@ -1,441 +0,0 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. -# tests/agrep/Makefile. Generated from Makefile.in by configure. - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -pkgdatadir = $(datadir)/tre -pkglibdir = $(libdir)/tre -pkgincludedir = $(includedir)/tre -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = x86_64-unknown-freebsd8.0 -host_triplet = x86_64-unknown-freebsd8.0 -target_triplet = x86_64-unknown-freebsd8.0 -subdir = tests/agrep -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/ac_libtool_tags.m4 \ - $(top_srcdir)/m4/ax_check_funcs_comp.m4 \ - $(top_srcdir)/m4/ax_check_sign.m4 \ - $(top_srcdir)/m4/ax_decl_wchar_max.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \ - $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ - $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/m4/vl_prog_cc_warnings.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/utils/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h \ - $(top_builddir)/lib/tre-config.h -CONFIG_CLEAN_FILES = -SOURCES = -DIST_SOURCES = -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run aclocal-1.10 -ALLOCA = -AMTAR = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run tar -AR = ar -AS = as -AUTOCONF = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoconf -AUTOHEADER = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoheader -AUTOMAKE = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run automake-1.10 -AWK = nawk -CC = gcc -CCDEPMODE = depmode=gcc3 -CFLAGS = -g -O2 -Wall -CPP = gcc -E -CPPFLAGS = -CYGPATH_W = echo -DEFS = -DHAVE_CONFIG_H -DEPDIR = .deps -DLLTOOL = dlltool -DSYMUTIL = -ECHO = echo -ECHO_C = -ECHO_N = -n -ECHO_T = -EGREP = /usr/bin/grep -E -EXEEXT = -GETTEXT_MACRO_VERSION = 0.17 -GMSGFMT = /usr/local/bin/msgfmt -GMSGFMT_015 = /usr/local/bin/msgfmt -GREP = /usr/bin/grep -INSTALL = /usr/bin/install -c -INSTALL_DATA = ${INSTALL} -m 644 -INSTALL_PROGRAM = ${INSTALL} -INSTALL_SCRIPT = ${INSTALL} -INSTALL_STRIP_PROGRAM = $(install_sh) -c -s -INTLLIBS = -INTL_MACOSX_LIBS = -LDFLAGS = -LIBICONV = /usr/local/lib/libiconv.so -Wl,-rpath -Wl,/usr/local/lib -LIBINTL = -LIBOBJS = -LIBS = -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LN_S = ln -s -LTLIBICONV = -L/usr/local/lib -liconv -R/usr/local/lib -LTLIBINTL = -LTLIBOBJS = -MAKEINFO = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run makeinfo -MKDIR_P = ../../utils/install-sh -c -d -MSGFMT = /usr/local/bin/msgfmt -MSGFMT_015 = /usr/local/bin/msgfmt -MSGMERGE = /usr/local/bin/msgmerge -NMEDIT = -OBJDUMP = objdump -OBJEXT = o -PACKAGE = tre -PACKAGE_BUGREPORT = tre-general@lists.laurikari.net -PACKAGE_NAME = TRE -PACKAGE_STRING = TRE 0.8.0 -PACKAGE_TARNAME = tre -PACKAGE_VERSION = 0.8.0 -PATH_SEPARATOR = : -POSUB = -RANLIB = ranlib -SED = /usr/local/bin/gsed -SET_MAKE = -SHELL = /bin/sh -STRIP = strip -TRE_VERSION = 0.8.0 -USE_NLS = no -VERSION = 0.8.0 -XGETTEXT = /usr/local/bin/xgettext -XGETTEXT_015 = /usr/local/bin/xgettext -XGETTEXT_EXTRA_OPTIONS = -abs_builddir = /home/gabor/wrk/tre/tre-0.8.0/tests/agrep -abs_srcdir = /home/gabor/wrk/tre/tre-0.8.0/tests/agrep -abs_top_builddir = /home/gabor/wrk/tre/tre-0.8.0 -abs_top_srcdir = /home/gabor/wrk/tre/tre-0.8.0 -ac_ct_CC = gcc -am__include = include -am__leading_dot = . -am__quote = -am__tar = ${AMTAR} chof - "$$tardir" -am__untar = ${AMTAR} xf - -bindir = ${exec_prefix}/bin -build = x86_64-unknown-freebsd8.0 -build_alias = -build_cpu = x86_64 -build_os = freebsd8.0 -build_vendor = unknown -builddir = . -datadir = ${datarootdir} -datarootdir = ${prefix}/share -docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} -dvidir = ${docdir} -exec_prefix = ${prefix} -host = x86_64-unknown-freebsd8.0 -host_alias = -host_cpu = x86_64 -host_os = freebsd8.0 -host_vendor = unknown -htmldir = ${docdir} -includedir = ${prefix}/include -infodir = ${datarootdir}/info -install_sh = $(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh -libdir = ${exec_prefix}/lib -libexecdir = ${exec_prefix}/libexec -localedir = ${datarootdir}/locale -localstatedir = ${prefix}/var -mandir = ${datarootdir}/man -mkdir_p = $(top_builddir)/utils/install-sh -c -d -oldincludedir = /usr/include -pdfdir = ${docdir} -prefix = /usr/local -program_transform_name = s,x,x, -psdir = ${docdir} -sbindir = ${exec_prefix}/sbin -sharedstatedir = ${prefix}/com -srcdir = . -sysconfdir = ${prefix}/etc -target = x86_64-unknown-freebsd8.0 -target_alias = -target_cpu = x86_64 -target_os = freebsd8.0 -target_vendor = unknown -top_builddir = ../.. -top_srcdir = ../.. -TESTS = run-tests.sh -TESTS_ENVIRONMENT = \ - top_builddir=$(top_builddir) \ - host_triplet=$(host_triplet) - -EXTRA_DIST = run-tests.sh -CLEANFILES = *.out -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/agrep/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign tests/agrep/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -check-TESTS: $(TESTS) - @failed=0; all=0; xfail=0; xpass=0; skip=0; ws='[ ]'; \ - srcdir=$(srcdir); export srcdir; \ - list=' $(TESTS) '; \ - if test -n "$$list"; then \ - for tst in $$list; do \ - if test -f ./$$tst; then dir=./; \ - elif test -f $$tst; then dir=; \ - else dir="$(srcdir)/"; fi; \ - if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *$$ws$$tst$$ws*) \ - xpass=`expr $$xpass + 1`; \ - failed=`expr $$failed + 1`; \ - echo "XPASS: $$tst"; \ - ;; \ - *) \ - echo "PASS: $$tst"; \ - ;; \ - esac; \ - elif test $$? -ne 77; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *$$ws$$tst$$ws*) \ - xfail=`expr $$xfail + 1`; \ - echo "XFAIL: $$tst"; \ - ;; \ - *) \ - failed=`expr $$failed + 1`; \ - echo "FAIL: $$tst"; \ - ;; \ - esac; \ - else \ - skip=`expr $$skip + 1`; \ - echo "SKIP: $$tst"; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - if test "$$xfail" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="All $$all tests behaved as expected ($$xfail expected failures)"; \ - fi; \ - else \ - if test "$$xpass" -eq 0; then \ - banner="$$failed of $$all tests failed"; \ - else \ - banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \ - fi; \ - fi; \ - dashes="$$banner"; \ - skipped=""; \ - if test "$$skip" -ne 0; then \ - skipped="($$skip tests were not run)"; \ - test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$skipped"; \ - fi; \ - report=""; \ - if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ - report="Please report to $(PACKAGE_BUGREPORT)"; \ - test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$report"; \ - fi; \ - dashes=`echo "$$dashes" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - test -z "$$skipped" || echo "$$skipped"; \ - test -z "$$report" || echo "$$report"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - else :; fi - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-hook -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-TESTS -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-exec-am: - -install-html: install-html-am - -install-info: install-info-am - -install-man: - -install-pdf: install-pdf-am - -install-ps: install-ps-am - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-TESTS check-am clean clean-generic \ - clean-libtool dist-hook distclean distclean-generic \ - distclean-libtool distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - uninstall uninstall-am - - -dist-hook: - cp -p $(srcdir)/*.args $(srcdir)/*.ok $(srcdir)/*.input $(distdir) -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/tre.pc b/tre.pc deleted file mode 100644 index 4854c4d556fd0..0000000000000 --- a/tre.pc +++ /dev/null @@ -1,10 +0,0 @@ -prefix=/usr/local -exec_prefix=${prefix} -libdir=${exec_prefix}/lib -includedir=${prefix}/include - -Name: TRE -Description: TRE regexp matching library -Version: 0.8.0 -Libs: -L${libdir} -ltre -Cflags: -I${includedir} diff --git a/tre.pc.in b/tre.pc.in deleted file mode 100644 index fdc45fa6c4249..0000000000000 --- a/tre.pc.in +++ /dev/null @@ -1,10 +0,0 @@ -prefix=@prefix@ -exec_prefix=@exec_prefix@ -libdir=@libdir@ -includedir=@includedir@ - -Name: TRE -Description: TRE regexp matching library -Version: @PACKAGE_VERSION@ -Libs: -L${libdir} -ltre @LDFLAGS@ @LIBINTL@ @LIBS@ -Cflags: -I${includedir} @CPPFLAGS@ diff --git a/tre.spec b/tre.spec deleted file mode 100644 index c3c6c02b35606..0000000000000 --- a/tre.spec +++ /dev/null @@ -1,114 +0,0 @@ -Name: tre -Version: 0.8.0 -Release: 1 -License: LGPL -Group: System Environment/Libraries -Source0: http://laurikari.net/tre/tre-0.8.0.tar.bz2 -Summary: POSIX compatible regexp library with approximate matching. -Packager: Ville Laurikari -URL: http://laurikari.net/tre/ -Buildroot: %{_tmppath}/%{name}-%{version}-%{release} - -Requires(post): /sbin/ldconfig -Requires(postun): /sbin/ldconfig - -%description -TRE is a lightweight, robust, and efficient POSIX compatible regexp -matching library with some exciting features such as approximate -matching. - -%post -/sbin/ldconfig - -%postun -/sbin/ldconfig - -%package devel -Requires: tre = 0.8.0 -Summary: Development files for use with the tre package. -Group: Development/Libraries - -%description devel -This package contains header files and static libraries for use when -building applications which use the TRE library. - - -%package agrep -Requires: tre >= 0.8.0 -Summary: Approximate grep utility. -Group: Applications/Text - -%description agrep -The agrep tool is similar to the commonly used grep utility, but agrep -can be used to search for approximate matches. - -The agrep tool searches text input for lines (or records separated by -strings matching arbitrary regexps) that contain an approximate, or -fuzzy, match to a specified regexp, and prints the matching lines. -Limits can be set on how many errors of each kind are allowed, or -only the best matching lines can be output. - -Unlike other agrep implementations, TRE agrep allows full POSIX -regexps of any length, any number of errors, and non-uniform costs. - -%prep -%setup -q - -%build -./configure --prefix=/usr --libdir=%{_libdir} --mandir=%{_mandir} --enable-static -make - -%install - -make install DESTDIR=$RPM_BUILD_ROOT - - -%clean -rm -rf $RPM_BUILD_ROOT - -%files -%defattr (-, root, root) -%{_datadir}/* -%{_libdir}/libtre.so.* -%doc doc/*.css -%doc doc/*.html - -%files devel -%defattr (-, root, root) -%{_includedir}/* -%{_libdir}/libtre.a -%{_libdir}/libtre.la -%{_libdir}/libtre.so -%{_libdir}/pkgconfig/* - -%files agrep -%defattr (-, root, root) -%{_bindir}/agrep -%{_mandir}/man1/agrep.1.gz - -%changelog -* Sat Jul 22 2006 Ville Laurikari -- fixed %doc macro and moved to correct place - -* Fri May 12 2006 Ville Laurikari -- fixed to work with recent rpmbuild versions (unpackaged files) -- handling for multilib environments - -* Sun Nov 21 2004 Ville Laurikari -- added agrep man page - -* Sun Mar 21 2004 Ville Laurikari -- added %doc doc - -* Wed Feb 25 2004 Ville Laurikari -- removed the .la file from devel package - -* Mon Dec 22 2003 Ville Laurikari -- added %post/%postun ldconfig scriplets. - -* Fri Oct 03 2003 Ville Laurikari -- included in the TRE source tree as `tre.spec.in'. - -* Tue Sep 30 2003 Matthew Berg -- tagged release 1 -- initial build diff --git a/tre.spec.in b/tre.spec.in deleted file mode 100644 index 788339a030522..0000000000000 --- a/tre.spec.in +++ /dev/null @@ -1,114 +0,0 @@ -Name: tre -Version: @PACKAGE_VERSION@ -Release: 1 -License: LGPL -Group: System Environment/Libraries -Source0: http://laurikari.net/tre/tre-@PACKAGE_VERSION@.tar.bz2 -Summary: POSIX compatible regexp library with approximate matching. -Packager: Ville Laurikari -URL: http://laurikari.net/tre/ -Buildroot: %{_tmppath}/%{name}-%{version}-%{release} - -Requires(post): /sbin/ldconfig -Requires(postun): /sbin/ldconfig - -%description -TRE is a lightweight, robust, and efficient POSIX compatible regexp -matching library with some exciting features such as approximate -matching. - -%post -/sbin/ldconfig - -%postun -/sbin/ldconfig - -%package devel -Requires: tre = @PACKAGE_VERSION@ -Summary: Development files for use with the tre package. -Group: Development/Libraries - -%description devel -This package contains header files and static libraries for use when -building applications which use the TRE library. - - -%package agrep -Requires: tre >= @PACKAGE_VERSION@ -Summary: Approximate grep utility. -Group: Applications/Text - -%description agrep -The agrep tool is similar to the commonly used grep utility, but agrep -can be used to search for approximate matches. - -The agrep tool searches text input for lines (or records separated by -strings matching arbitrary regexps) that contain an approximate, or -fuzzy, match to a specified regexp, and prints the matching lines. -Limits can be set on how many errors of each kind are allowed, or -only the best matching lines can be output. - -Unlike other agrep implementations, TRE agrep allows full POSIX -regexps of any length, any number of errors, and non-uniform costs. - -%prep -%setup -q - -%build -./configure --prefix=/usr --libdir=%{_libdir} --mandir=%{_mandir} --enable-static -make - -%install - -make install DESTDIR=$RPM_BUILD_ROOT - - -%clean -rm -rf $RPM_BUILD_ROOT - -%files -%defattr (-, root, root) -%{_datadir}/* -%{_libdir}/libtre.so.* -%doc doc/*.css -%doc doc/*.html - -%files devel -%defattr (-, root, root) -%{_includedir}/* -%{_libdir}/libtre.a -%{_libdir}/libtre.la -%{_libdir}/libtre.so -%{_libdir}/pkgconfig/* - -%files agrep -%defattr (-, root, root) -%{_bindir}/agrep -%{_mandir}/man1/agrep.1.gz - -%changelog -* Sat Jul 22 2006 Ville Laurikari -- fixed %doc macro and moved to correct place - -* Fri May 12 2006 Ville Laurikari -- fixed to work with recent rpmbuild versions (unpackaged files) -- handling for multilib environments - -* Sun Nov 21 2004 Ville Laurikari -- added agrep man page - -* Sun Mar 21 2004 Ville Laurikari -- added %doc doc - -* Wed Feb 25 2004 Ville Laurikari -- removed the .la file from devel package - -* Mon Dec 22 2003 Ville Laurikari -- added %post/%postun ldconfig scriplets. - -* Fri Oct 03 2003 Ville Laurikari -- included in the TRE source tree as `tre.spec.in'. - -* Tue Sep 30 2003 Matthew Berg -- tagged release 1 -- initial build diff --git a/utils/Makefile b/utils/Makefile deleted file mode 100644 index af14c75c2c7ae..0000000000000 --- a/utils/Makefile +++ /dev/null @@ -1,359 +0,0 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. -# utils/Makefile. Generated from Makefile.in by configure. - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - -pkgdatadir = $(datadir)/tre -pkglibdir = $(libdir)/tre -pkgincludedir = $(includedir)/tre -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = x86_64-unknown-freebsd8.0 -host_triplet = x86_64-unknown-freebsd8.0 -target_triplet = x86_64-unknown-freebsd8.0 -subdir = utils -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in compile \ - config.guess config.rpath config.sub depcomp install-sh \ - ltmain.sh missing mkinstalldirs -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/ac_libtool_tags.m4 \ - $(top_srcdir)/m4/ax_check_funcs_comp.m4 \ - $(top_srcdir)/m4/ax_check_sign.m4 \ - $(top_srcdir)/m4/ax_decl_wchar_max.m4 \ - $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \ - $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ - $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ - $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ - $(top_srcdir)/m4/progtest.m4 \ - $(top_srcdir)/m4/vl_prog_cc_warnings.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/utils/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h \ - $(top_builddir)/lib/tre-config.h -CONFIG_CLEAN_FILES = -SOURCES = -DIST_SOURCES = -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run aclocal-1.10 -ALLOCA = -AMTAR = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run tar -AR = ar -AS = as -AUTOCONF = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoconf -AUTOHEADER = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run autoheader -AUTOMAKE = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run automake-1.10 -AWK = nawk -CC = gcc -CCDEPMODE = depmode=gcc3 -CFLAGS = -g -O2 -Wall -CPP = gcc -E -CPPFLAGS = -CYGPATH_W = echo -DEFS = -DHAVE_CONFIG_H -DEPDIR = .deps -DLLTOOL = dlltool -DSYMUTIL = -ECHO = echo -ECHO_C = -ECHO_N = -n -ECHO_T = -EGREP = /usr/bin/grep -E -EXEEXT = -GETTEXT_MACRO_VERSION = 0.17 -GMSGFMT = /usr/local/bin/msgfmt -GMSGFMT_015 = /usr/local/bin/msgfmt -GREP = /usr/bin/grep -INSTALL = /usr/bin/install -c -INSTALL_DATA = ${INSTALL} -m 644 -INSTALL_PROGRAM = ${INSTALL} -INSTALL_SCRIPT = ${INSTALL} -INSTALL_STRIP_PROGRAM = $(install_sh) -c -s -INTLLIBS = -INTL_MACOSX_LIBS = -LDFLAGS = -LIBICONV = /usr/local/lib/libiconv.so -Wl,-rpath -Wl,/usr/local/lib -LIBINTL = -LIBOBJS = -LIBS = -LIBTOOL = $(SHELL) $(top_builddir)/libtool -LN_S = ln -s -LTLIBICONV = -L/usr/local/lib -liconv -R/usr/local/lib -LTLIBINTL = -LTLIBOBJS = -MAKEINFO = ${SHELL} /home/gabor/wrk/tre/tre-0.8.0/utils/missing --run makeinfo -MKDIR_P = ../utils/install-sh -c -d -MSGFMT = /usr/local/bin/msgfmt -MSGFMT_015 = /usr/local/bin/msgfmt -MSGMERGE = /usr/local/bin/msgmerge -NMEDIT = -OBJDUMP = objdump -OBJEXT = o -PACKAGE = tre -PACKAGE_BUGREPORT = tre-general@lists.laurikari.net -PACKAGE_NAME = TRE -PACKAGE_STRING = TRE 0.8.0 -PACKAGE_TARNAME = tre -PACKAGE_VERSION = 0.8.0 -PATH_SEPARATOR = : -POSUB = -RANLIB = ranlib -SED = /usr/local/bin/gsed -SET_MAKE = -SHELL = /bin/sh -STRIP = strip -TRE_VERSION = 0.8.0 -USE_NLS = no -VERSION = 0.8.0 -XGETTEXT = /usr/local/bin/xgettext -XGETTEXT_015 = /usr/local/bin/xgettext -XGETTEXT_EXTRA_OPTIONS = -abs_builddir = /home/gabor/wrk/tre/tre-0.8.0/utils -abs_srcdir = /home/gabor/wrk/tre/tre-0.8.0/utils -abs_top_builddir = /home/gabor/wrk/tre/tre-0.8.0 -abs_top_srcdir = /home/gabor/wrk/tre/tre-0.8.0 -ac_ct_CC = gcc -am__include = include -am__leading_dot = . -am__quote = -am__tar = ${AMTAR} chof - "$$tardir" -am__untar = ${AMTAR} xf - -bindir = ${exec_prefix}/bin -build = x86_64-unknown-freebsd8.0 -build_alias = -build_cpu = x86_64 -build_os = freebsd8.0 -build_vendor = unknown -builddir = . -datadir = ${datarootdir} -datarootdir = ${prefix}/share -docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} -dvidir = ${docdir} -exec_prefix = ${prefix} -host = x86_64-unknown-freebsd8.0 -host_alias = -host_cpu = x86_64 -host_os = freebsd8.0 -host_vendor = unknown -htmldir = ${docdir} -includedir = ${prefix}/include -infodir = ${datarootdir}/info -install_sh = $(SHELL) /home/gabor/wrk/tre/tre-0.8.0/utils/install-sh -libdir = ${exec_prefix}/lib -libexecdir = ${exec_prefix}/libexec -localedir = ${datarootdir}/locale -localstatedir = ${prefix}/var -mandir = ${datarootdir}/man -mkdir_p = $(top_builddir)/utils/install-sh -c -d -oldincludedir = /usr/include -pdfdir = ${docdir} -prefix = /usr/local -program_transform_name = s,x,x, -psdir = ${docdir} -sbindir = ${exec_prefix}/sbin -sharedstatedir = ${prefix}/com -srcdir = . -sysconfdir = ${prefix}/etc -target = x86_64-unknown-freebsd8.0 -target_alias = -target_cpu = x86_64 -target_os = freebsd8.0 -target_vendor = unknown -top_builddir = .. -top_srcdir = .. -EXTRA_DIST = \ - autogen.sh \ - build-rpm.sh \ - mkinstalldirs - -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign utils/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign utils/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-exec-am: - -install-html: install-html-am - -install-info: install-info-am - -install-man: - -install-pdf: install-pdf-am - -install-ps: install-ps-am - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic clean-libtool \ - distclean distclean-generic distclean-libtool distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/win32/config.h b/win32/config.h deleted file mode 100644 index 766ec8266b617..0000000000000 --- a/win32/config.h +++ /dev/null @@ -1,183 +0,0 @@ -/* config.h for Windows. */ - -/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP - systems. This function is required for `alloca.c' support on those systems. -*/ -/* #undef CRAY_STACKSEG_END */ - -/* Define to 1 if using `alloca.c'. */ -/* #undef C_ALLOCA */ - -/* Define to 1 if translation of program messages to the user's native - language is requested. */ -/* #undef ENABLE_NLS */ - -/* Define to 1 if you have `alloca', as a function or macro. */ -#define HAVE_ALLOCA 1 - -/* Define to 1 if you have and it should be used (not on Ultrix). - */ -/* #undef HAVE_ALLOCA_H */ - -/* Define to 1 if you have and it should be used. */ -#define HAVE_MALLOC_H 1 - -/* Define if the GNU dcgettext() function is already present or preinstalled. - */ -/* #undef HAVE_DCGETTEXT */ - -/* Define to 1 if you have the header file. */ -#undef HAVE_DLFCN_H - -/* Define to 1 if you have the header file. */ -#define HAVE_GETOPT_H 1 - -/* Define to 1 if you have the `getopt_long' function. */ -#define HAVE_GETOPT_LONG 1 - -/* Define if the GNU gettext() function is already present or preinstalled. */ -#undef HAVE_GETTEXT - -/* Define if you have the iconv() function. */ -#undef HAVE_ICONV - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if you have the `isascii' function. */ -#define HAVE_ISASCII 1 - -/* Define to 1 if you have the `isblank' function. */ -/* #undef HAVE_ISBLANK */ - -/* Define to 1 if you have the `iswctype' function. */ -#define HAVE_ISWCTYPE 1 - -/* Define to 1 if you have the `iswlower' function. */ -#define HAVE_ISWLOWER 1 - -/* Define to 1 if you have the `iswupper' function. */ -#define HAVE_ISWUPPER 1 - -/* Define to 1 if you have the `mbrtowc' function. */ -#define HAVE_MBRTOWC 1 - -/* Define to 1 if the system has the type `mbstate_t'. */ -#define HAVE_MBSTATE_T 1 - -/* Define to 1 if you have the `mbtowc' function. */ -#define HAVE_MBTOWC 1 - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_REGEX_H - /* Define to 1 if the system has the type `reg_errcode_t'. */ -#undef HAVE_REG_ERRCODE_T - -/* Define to 1 if you have the header file. */ -#define HAVE_STDINT_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STDLIB_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STRINGS_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_STRING_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_STAT_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_TYPES_H 1 - -/* Define to 1 if you have the `towlower' function. */ -#undef HAVE_TOWLOWER - -/* Define to 1 if you have the `towupper' function. */ -#define HAVE_TOWUPPER 1 - -/* Define to 1 if you have the header file. */ -/* #undef HAVE_UNISTD_H */ - -/* Define to 1 if you have the header file. */ -#define HAVE_WCHAR_H 1 - -/* Define to 1 if the system has the type `wchar_t'. */ -#define HAVE_WCHAR_T 1 - -/* Define to 1 if you have the `wcschr' function. */ -#define HAVE_WCSCHR 1 - -/* Define to 1 if you have the `wcscpy' function. */ -#define HAVE_WCSCPY 1 - -/* Define to 1 if you have the `wcslen' function. */ -#define HAVE_WCSLEN 1 - -/* Define to 1 if you have the `wcsncpy' function. */ -#define HAVE_WCSNCPY 1 - -/* Define to 1 if you have the `wcsrtombs' function. */ -#define HAVE_WCSRTOMBS 1 - -/* Define to 1 if you have the `wcstombs' function. */ -/* #undef HAVE_WCSTOMBS */ - -/* Define to 1 if you have the `wctype' function. */ -#define HAVE_WCTYPE 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_WCTYPE_H 1 - -/* Define if you want to disable debug assertions. */ -/* #undef NDEBUG */ - -/* Define to 1 if you have the ANSI C header files. */ -#define STDC_HEADERS 1 - -/* Define if you want to enable approximate matching functionality. */ -#define TRE_APPROX 1 - -/* Define if you want TRE to print debug messages to stdout. */ -/* #undef TRE_DEBUG */ - -/* Define to enable multibyte character set support. */ -#define TRE_MULTIBYTE 1 - -/* Define to a field in the regex_t struct where TRE should store a pointer to - the internal tre_tnfa_t structure */ -#define TRE_REGEX_T_FIELD value - -/* Define to the absolute path to the system regex.h */ -/* #undef TRE_SYSTEM_REGEX_H_PATH */ - -/* Define to include the system regex.h from TRE regex.h */ -/* #undef TRE_USE_SYSTEM_REGEX_H */ - -/* Define to enable wide character (wchar_t) support. */ -#define TRE_WCHAR 1 - -/* Define to the maximum value of wchar_t if not already defined elsewhere */ -/* #undef WCHAR_MAX */ - -/* Define if wchar_t is signed */ -/* #undef WCHAR_T_SIGNED */ - -/* Define if wchar_t is unsigned */ -#define WCHAR_T_UNSIGNED 1 - -/* Define to empty if `const' does not conform to ANSI C. */ -/* #undef const */ - -/* Define as `__inline' if that's what the C compiler calls it, or to nothing - if it is not supported. */ -#define inline __inline - -/* Avoid silly warnings about "insecure" functions. */ -#define _CRT_SECURE_NO_DEPRECATE 1 - -#define snprintf sprintf_s diff --git a/win32/retest.dsp b/win32/retest.dsp deleted file mode 100644 index ad43b24c31c8c..0000000000000 --- a/win32/retest.dsp +++ /dev/null @@ -1,94 +0,0 @@ -# Microsoft Developer Studio Project File - Name="retest" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 6.00 -# ** DO NOT EDIT ** - -# TARGTYPE "Win32 (x86) Console Application" 0x0103 - -CFG=retest - Win32 Debug -!MESSAGE This is not a valid makefile. To build this project using NMAKE, -!MESSAGE use the Export Makefile command and run -!MESSAGE -!MESSAGE NMAKE /f "retest.mak". -!MESSAGE -!MESSAGE You can specify a configuration when running NMAKE -!MESSAGE by defining the macro CFG on the command line. For example: -!MESSAGE -!MESSAGE NMAKE /f "retest.mak" CFG="retest - Win32 Debug" -!MESSAGE -!MESSAGE Possible choices for configuration are: -!MESSAGE -!MESSAGE "retest - Win32 Release" (based on "Win32 (x86) Console Application") -!MESSAGE "retest - Win32 Debug" (based on "Win32 (x86) Console Application") -!MESSAGE - -# Begin Project -# PROP AllowPerConfigDependencies 0 -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -RSC=rc.exe - -!IF "$(CFG)" == "retest - Win32 Release" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "Release" -# PROP BASE Intermediate_Dir "Release" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "Release" -# PROP Intermediate_Dir "Release" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /c -# ADD CPP /nologo /W3 /GX /O2 /I "../lib" /I "../win32" /D "NDEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "HAVE_CONFIG_H" /YX /FD /c -# ADD BASE RSC /l 0x40b /d "NDEBUG" -# ADD RSC /l 0x40b /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:console /machine:I386 -# ADD LINK32 Release/tre.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib msvcprt.lib /nologo /subsystem:console /machine:I386 - -!ELSEIF "$(CFG)" == "retest - Win32 Debug" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 1 -# PROP BASE Output_Dir "Debug" -# PROP BASE Intermediate_Dir "Debug" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 1 -# PROP Output_Dir "Debug" -# PROP Intermediate_Dir "Debug" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /D "_MBCS" /YX /FD /GZ /c -# ADD CPP /nologo /W3 /Gm /GX /ZI /Od /I "../lib" /I "../win32" /D "_DEBUG" /D "WIN32" /D "_CONSOLE" /D "_MBCS" /D "HAVE_CONFIG_H" /YX /FD /GZ /c -# ADD BASE RSC /l 0x40b /d "_DEBUG" -# ADD RSC /l 0x40b /d "_DEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept -# ADD LINK32 Debug/tre.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib msvcprt.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept - -!ENDIF - -# Begin Target - -# Name "retest - Win32 Release" -# Name "retest - Win32 Debug" -# Begin Group "Source Files" - -# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat" -# Begin Source File - -SOURCE=..\tests\retest.c -# End Source File -# End Group -# End Target -# End Project diff --git a/win32/tre-config.h b/win32/tre-config.h deleted file mode 100644 index 5e6a3be96c317..0000000000000 --- a/win32/tre-config.h +++ /dev/null @@ -1,52 +0,0 @@ -/* tre-config.h. This file defines all compile time definitions - that are needed in `regex.h' for Win32. */ - -/* Define to 1 if you have `alloca', as a function or macro. */ -#define HAVE_ALLOCA 1 - -/* Define to 1 if you have and it should be used (not on Ultrix). - */ -#define HAVE_ALLOCA_H 1 - -/* Define to 1 if you have the header file. */ -/* #undef HAVE_LIBUTF8_H */ - -/* Define to 1 if the system has the type `reg_errcode_t'. */ -/* #undef HAVE_REG_ERRCODE_T */ - -/* Define to 1 if you have the header file. */ -#define HAVE_SYS_TYPES_H 1 - -/* Define to 1 if you have the header file. */ -#define HAVE_WCHAR_H 1 - -/* Define if you want to enable approximate matching functionality. */ -#define TRE_APPROX 1 - -/* Define to enable multibyte character set support. */ -#define TRE_MULTIBYTE 1 - -/* Define to the absolute path to the system regex.h */ -/* #undef TRE_SYSTEM_REGEX_H_PATH */ - -/* Define if you want TRE to use alloca() instead of malloc() when allocating - memory needed for regexec operations. */ -#define TRE_USE_ALLOCA 1 - -/* Define to include the system regex.h from TRE regex.h */ -/* #undef TRE_USE_SYSTEM_REGEX_H */ - -/* Define to enable wide character (wchar_t) support. */ -#define TRE_WCHAR 1 - -/* TRE version string. */ -#define TRE_VERSION "0.8.0" - -/* TRE version level 1. */ -#define TRE_VERSION_1 0 - -/* TRE version level 2. */ -#define TRE_VERSION_2 8 - -/* TRE version level 3. */ -#define TRE_VERSION_3 0 diff --git a/win32/tre.def b/win32/tre.def deleted file mode 100644 index 3c1503b67dddd..0000000000000 --- a/win32/tre.def +++ /dev/null @@ -1,23 +0,0 @@ -LIBRARY "tre.dll" - -EXPORTS - tre_regaexec @1 - tre_reganexec @2 - tre_regcomp @3 - tre_regerror @4 - tre_regexec @5 - tre_regfree @6 - tre_regncomp @7 - tre_regnexec @8 - tre_regawexec @9 - tre_regawnexec @10 - tre_regwcomp @11 - tre_regwexec @12 - tre_regwncomp @13 - tre_regwnexec @14 - tre_regaparams_default @15 - tre_version @16 - tre_config @17 - tre_have_backrefs @18 - tre_have_approx @19 - tre_reguexec @20 diff --git a/win32/tre.dsp b/win32/tre.dsp deleted file mode 100644 index 3a3a9e9e0a256..0000000000000 --- a/win32/tre.dsp +++ /dev/null @@ -1,200 +0,0 @@ -# Microsoft Developer Studio Project File - Name="tre" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 6.00 -# ** DO NOT EDIT ** - -# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102 - -CFG=tre - Win32 Debug -!MESSAGE This is not a valid makefile. To build this project using NMAKE, -!MESSAGE use the Export Makefile command and run -!MESSAGE -!MESSAGE NMAKE /f "tre.mak". -!MESSAGE -!MESSAGE You can specify a configuration when running NMAKE -!MESSAGE by defining the macro CFG on the command line. For example: -!MESSAGE -!MESSAGE NMAKE /f "tre.mak" CFG="tre - Win32 Debug" -!MESSAGE -!MESSAGE Possible choices for configuration are: -!MESSAGE -!MESSAGE "tre - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library") -!MESSAGE "tre - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library") -!MESSAGE - -# Begin Project -# PROP AllowPerConfigDependencies 0 -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -MTL=midl.exe -RSC=rc.exe - -!IF "$(CFG)" == "tre - Win32 Release" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "Release" -# PROP BASE Intermediate_Dir "Release" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "Release" -# PROP Intermediate_Dir "Release" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "TRE_EXPORTS" /YX /FD /c -# ADD CPP /nologo /MD /W3 /GX /O2 /I "../win32" /I "../lib" /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "TRE_EXPORTS" /D "HAVE_CONFIG_H" /FR /YX /FD /c -# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32 -# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32 -# ADD BASE RSC /l 0x40c /d "NDEBUG" -# ADD RSC /l 0x40c /d "NDEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /dll /machine:I386 -# ADD LINK32 msvcrt.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib msvcprt.lib /nologo /dll /machine:I386 -# SUBTRACT LINK32 /nodefaultlib - -!ELSEIF "$(CFG)" == "tre - Win32 Debug" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 1 -# PROP BASE Output_Dir "Debug" -# PROP BASE Intermediate_Dir "Debug" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 1 -# PROP Output_Dir "Debug" -# PROP Intermediate_Dir "Debug" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "TRE_EXPORTS" /YX /FD /GZ /c -# ADD CPP /nologo /MDd /W3 /Gm /GX /ZI /Od /I "../win32" /I "../lib" /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /D "_MBCS" /D "_USRDLL" /D "TRE_EXPORTS" /D "TRE_DEBUG" /D "HAVE_CONFIG_H" /FR /YX /FD /GZ /c -# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32 -# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32 -# ADD BASE RSC /l 0x40c /d "_DEBUG" -# ADD RSC /l 0x40c /d "_DEBUG" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /dll /debug /machine:I386 /pdbtype:sept -# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib msvcprt.lib /nologo /dll /debug /machine:I386 /pdbtype:sept - -!ENDIF - -# Begin Target - -# Name "tre - Win32 Release" -# Name "tre - Win32 Debug" -# Begin Group "Source Files" - -# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat" -# Begin Source File - -SOURCE=..\lib\regcomp.c -# End Source File -# Begin Source File - -SOURCE=..\lib\regerror.c -# End Source File -# Begin Source File - -SOURCE=..\lib\regexec.c -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-ast.c" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-compile.c" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-match-approx.c" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-match-backtrack.c" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-match-parallel.c" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-mem.c" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-parse.c" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-stack.c" -# End Source File -# End Group -# Begin Group "Header Files" - -# PROP Default_Filter "" -# Begin Source File - -SOURCE=.\config.h -# End Source File -# Begin Source File - -SOURCE=..\lib\regex.h -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-ast.h" -# End Source File -# Begin Source File - -SOURCE=".\tre-config.h" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-compile.h" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-internal.h" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-match-utils.h" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-mem.h" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-parse.h" -# End Source File -# Begin Source File - -SOURCE="..\lib\tre-stack.h" -# End Source File -# Begin Source File - -SOURCE=.\tre.def -# End Source File -# Begin Source File - -SOURCE=..\lib\xmalloc.h -# End Source File -# End Group -# End Target -# Begin Group "Header Files No. 1" - -# PROP Default_Filter "h;hpp;hxx;hm;inl" -# End Group -# Begin Group "Resource Files" - -# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe" -# End Group -# End Project diff --git a/win32/tre.dsw b/win32/tre.dsw deleted file mode 100644 index 6f2dda12d871c..0000000000000 --- a/win32/tre.dsw +++ /dev/null @@ -1,43 +0,0 @@ -Microsoft Developer Studio Workspace File, Format Version 6.00 -# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE! - -############################################################################### - -Project: "retest"=".\retest.dsp" - Package Owner=<4> - -Package=<5> -{{{ -}}} - -Package=<4> -{{{ - Begin Project Dependency - Project_Dep_Name tre - End Project Dependency -}}} - -############################################################################### - -Project: "tre"=".\tre.dsp" - Package Owner=<4> - -Package=<5> -{{{ -}}} - -Package=<4> -{{{ -}}} - -############################################################################### - -Global: - -Package=<5> -{{{ -}}} - -Package=<3> -{{{ -}}} - -############################################################################### -- cgit v1.2.3