MFC r256912, r256931, r256977

2013-11-01T21:15:39Z

Sync BERI kernel configs with P4: Switch the majority of device configuration to FDT from hints. Add BERI_*_BASE configs to reduce duplication in the MDROOT and SDROOT kernels. Add NFS and GSSAPI support by default. Enable ATSE_CFI_HACK in BERI configs, stable MAC addresses are useful. BERI_SIM.hint is no longer used, remove it. Sponsored by: DARPA/AFRL Approved by: re (delphij)

MFC 256293:

2013-10-15T21:08:37Z

Sanitize the %eflags returned by BIOS routines. Some BIOS routines enter protected mode and may leave protected-mode-specific flags like PSL_NT set when they return to real mode. This can cause a fault when BTX re-enters protected mode after the BIOS mode returns. Approved by: re (gjb)

Merge from project branch via main. Uninteresting commits are trimmed.

2013-10-12T15:31:36Z

Refactor of /dev/random device. Main points include: * Userland seeding is no longer used. This auto-seeds at boot time on PC/Desktop setups; this may need some tweeking and intelligence from those folks setting up embedded boxes, but the work is believed to be minimal. * An entropy cache is written to /entropy (even during installation) and the kernel uses this at next boot. * An entropy file written to /boot/entropy can be loaded by loader(8) * Hardware sources such as rdrand are fed into Yarrow, and are no longer available raw. ------------------------------------------------------------------------ r256240 | des | 2013-10-09 21:14:16 +0100 (Wed, 09 Oct 2013) | 4 lines Add a RANDOM_RWFILE option and hide the entropy cache code behind it. Rename YARROW_RNG and FORTUNA_RNG to RANDOM_YARROW and RANDOM_FORTUNA. Add the RANDOM_* options to LINT. ------------------------------------------------------------------------ r256239 | des | 2013-10-09 21:12:59 +0100 (Wed, 09 Oct 2013) | 2 lines Define RANDOM_PURE_RNDTEST for rndtest(4). ------------------------------------------------------------------------ r256204 | des | 2013-10-09 18:51:38 +0100 (Wed, 09 Oct 2013) | 2 lines staticize struct random_hardware_source ------------------------------------------------------------------------ r256203 | markm | 2013-10-09 18:50:36 +0100 (Wed, 09 Oct 2013) | 2 lines Wrap some policy-rich code in 'if NOTYET' until we can thresh out what it really needs to do. ------------------------------------------------------------------------ r256184 | des | 2013-10-09 10:13:12 +0100 (Wed, 09 Oct 2013) | 2 lines Re-add /dev/urandom for compatibility purposes. ------------------------------------------------------------------------ r256182 | des | 2013-10-09 10:11:14 +0100 (Wed, 09 Oct 2013) | 3 lines Add missing include guards and move the existing ones out of the implementation namespace. ------------------------------------------------------------------------ r256168 | markm | 2013-10-08 23:14:07 +0100 (Tue, 08 Oct 2013) | 10 lines Fix some just-noticed problems: o Allow this to work with "nodevice random" by fixing where the MALLOC pool is defined. o Fix the explicit reseed code. This was correct as submitted, but in the project branch doesn't need to set the "seeded" bit as this is done correctly in the "unblock" function. o Remove some debug ifdeffing. o Adjust comments. ------------------------------------------------------------------------ r256159 | markm | 2013-10-08 19:48:11 +0100 (Tue, 08 Oct 2013) | 6 lines Time to eat crow for me. I replaced the sx_* locks that Arthur used with regular mutexes; this turned out the be the wrong thing to do as the locks need to be sleepable. Revert this folly. # Submitted by: Arthur Mesh (In original diff) ------------------------------------------------------------------------ r256138 | des | 2013-10-08 12:05:26 +0100 (Tue, 08 Oct 2013) | 10 lines Add YARROW_RNG and FORTUNA_RNG to sys/conf/options. Add a SYSINIT that forces a reseed during proc0 setup, which happens fairly late in the boot process. Add a RANDOM_DEBUG option which enables some debugging printf()s. Add a new RANDOM_ATTACH entropy source which harvests entropy from the get_cyclecount() delta across each call to a device attach method. ------------------------------------------------------------------------ r256135 | markm | 2013-10-08 07:54:52 +0100 (Tue, 08 Oct 2013) | 8 lines Debugging. My attempt at EVENTHANDLER(multiuser) was a failure; use EVENTHANDLER(mountroot) instead. This means we can't count on /var being present, so something will need to be done about harvesting /var/db/entropy/... . Some policy now needs to be sorted out, and a pre-sync cache needs to be written, but apart from that we are now ready to go. Over to review. ------------------------------------------------------------------------ r256094 | markm | 2013-10-06 23:45:02 +0100 (Sun, 06 Oct 2013) | 8 lines Snapshot. Looking pretty good; this mostly works now. New code includes: * Read cached entropy at startup, both from files and from loader(8) preloaded entropy. Failures are soft, but announced. Untested. * Use EVENTHANDLER to do above just before we go multiuser. Untested. ------------------------------------------------------------------------ r256088 | markm | 2013-10-06 14:01:42 +0100 (Sun, 06 Oct 2013) | 2 lines Fix up the man page for random(4). This mainly removes no-longer-relevant details about HW RNGs, reseeding explicitly and user-supplied entropy. ------------------------------------------------------------------------ r256087 | markm | 2013-10-06 13:43:42 +0100 (Sun, 06 Oct 2013) | 6 lines As userland writing to /dev/random is no more, remove the "better than nothing" bootstrap mode. Add SWI harvesting to the mix. My box seeds Yarrow by itself in a few seconds! YMMV; more to follow. ------------------------------------------------------------------------ r256086 | markm | 2013-10-06 13:40:32 +0100 (Sun, 06 Oct 2013) | 11 lines Debug run. This now works, except that the "live" sources haven't been tested. With all sources turned on, this unlocks itself in a couple of seconds! That is no my box, and there is no guarantee that this will be the case everywhere. * Cut debug prints. * Use the same locks/mutexes all the way through. * Be a tad more conservative about entropy estimates. ------------------------------------------------------------------------ r256084 | markm | 2013-10-06 13:35:29 +0100 (Sun, 06 Oct 2013) | 5 lines Don't use the "real" assembler mnemonics; older compilers may not understand them (like when building CURRENT on 9.x). # Submitted by: Konstantin Belousov ------------------------------------------------------------------------ r256081 | markm | 2013-10-06 10:55:28 +0100 (Sun, 06 Oct 2013) | 12 lines SNAPSHOT. Simplify the malloc pools; We only need one for this device. Simplify the harvest queue. Marginally improve the entropy pool hashing, making it a bit faster in the process. Connect up the hardware "live" source harvesting. This is simplistic for now, and will need to be made rate-adaptive. All of the above passes a compile test but needs to be debugged. ------------------------------------------------------------------------ r256042 | markm | 2013-10-04 07:55:06 +0100 (Fri, 04 Oct 2013) | 25 lines Snapshot. This passes the build test, but has not yet been finished or debugged. Contains: * Refactor the hardware RNG CPU instruction sources to feed into the software mixer. This is unfinished. The actual harvesting needs to be sorted out. Modified by me (see below). * Remove 'frac' parameter from random_harvest(). This was never used and adds extra code for no good reason. * Remove device write entropy harvesting. This provided a weak attack vector, was not very good at bootstrapping the device. To follow will be a replacement explicit reseed knob. * Separate out all the RANDOM_PURE sources into separate harvest entities. This adds some secuity in the case where more than one is present. * Review all the code and fix anything obviously messy or inconsistent. Address som review concerns while I'm here, like rename the pseudo-rng to 'dummy'. # Submitted by: Arthur Mesh (the first item) ------------------------------------------------------------------------ r255319 | markm | 2013-09-06 18:51:52 +0100 (Fri, 06 Sep 2013) | 4 lines Yarrow wants entropy estimations to be conservative; the usual idea is that if you are certain you have N bits of entropy, you declare N/2. ------------------------------------------------------------------------ r255075 | markm | 2013-08-30 18:47:53 +0100 (Fri, 30 Aug 2013) | 4 lines Remove short-lived idea; thread to harvest (eg) RDRAND enropy into the usual harvest queues. It was a nifty idea, but too heavyweight. # Submitted by: Arthur Mesh ------------------------------------------------------------------------ r255071 | markm | 2013-08-30 12:42:57 +0100 (Fri, 30 Aug 2013) | 4 lines Separate out the Software RNG entropy harvesting queue and thread into its own files. # Submitted by: Arthur Mesh ------------------------------------------------------------------------ r254934 | markm | 2013-08-26 20:07:03 +0100 (Mon, 26 Aug 2013) | 2 lines Remove the short-lived namei experiment. ------------------------------------------------------------------------ r254928 | markm | 2013-08-26 19:35:21 +0100 (Mon, 26 Aug 2013) | 2 lines Snapshot; Do some running repairs on entropy harvesting. More needs to follow. ------------------------------------------------------------------------ r254927 | markm | 2013-08-26 19:29:51 +0100 (Mon, 26 Aug 2013) | 15 lines Snapshot of current work; 1) Clean up namespace; only use "Yarrow" where it is Yarrow-specific or close enough to the Yarrow algorithm. For the rest use a neutral name. 2) Tidy up headers; put private stuff in private places. More could be done here. 3) Streamline the hashing/encryption; no need for a 256-bit counter; 128 bits will last for long enough. There are bits of debug code lying around; these will be removed at a later stage. ------------------------------------------------------------------------ r254784 | markm | 2013-08-24 14:54:56 +0100 (Sat, 24 Aug 2013) | 39 lines 1) example (partially humorous random_adaptor, that I call "EXAMPLE") * It's not meant to be used in a real system, it's there to show how the basics of how to create interfaces for random_adaptors. Perhaps it should belong in a manual page 2) Move probe.c's functionality in to random_adaptors.c * rename random_ident_hardware() to random_adaptor_choose() 3) Introduce a new way to choose (or select) random_adaptors via tunable "rngs_want" It's a list of comma separated names of adaptors, ordered by preferences. I.e.: rngs_want="yarrow,rdrand" Such setting would cause yarrow to be preferred to rdrand. If neither of them are available (or registered), then system will default to something reasonable (currently yarrow). If yarrow is not present, then we fall back to the adaptor that's first on the list of registered adaptors. 4) Introduce a way where RNGs can play a role of entropy source. This is mostly useful for HW rngs. The way I envision this is that every HW RNG will use this functionality by default. Functionality to disable this is also present. I have an example of how to use this in random_adaptor_example.c (see modload event, and init function) 5) fix kern.random.adaptors from kern.random.adaptors: yarrowpanicblock to kern.random.adaptors: yarrow,panic,block 6) add kern.random.active_adaptor to indicate currently selected adaptor: root@freebsd04:~ # sysctl kern.random.active_adaptor kern.random.active_adaptor: yarrow # Submitted by: Arthur Mesh Submitted by: Dag-Erling Smørgrav , Arthur Mesh Reviewed by: des@FreeBSD.org Approved by: re (delphij) Approved by: secteam (des,delphij)

Sweep man pages replacing ad -> ada.

2013-10-01T18:41:53Z

Approved by: re (blackend) MFC after: 1 week X-MFC note: stable/9 only

Use MK_SSP=no after including bsd.own.mk to disable SSP instead of user-knob

2013-09-29T20:20:17Z

WITH[OUT]_SSP to avoid hitting an error if user has WITH_SSP in their make.conf. Ports now use this knob. make[7]: "/usr/src/share/mk/bsd.own.mk" line 466: WITH_SSP and WITHOUT_SSP can't both be set. This is similar to previous cleanup done in r188895 Approved by: bapt Reviewed by: jlh (earlier version) Approved by: re (marius) MFC after: 1 week

Fix ixp425 boot2 with ARM EABI:

2013-09-29T15:19:34Z

- libkern is missing __aeabi_llsl, implement this by calling __ashldi3. - Because of how the asm entry macros are defined the boot2 code requires the unwind symbols to exist, include them in boot2. Approved by: re (marius)

Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards.

2013-09-01T20:15:35Z

There are many drivers missing, but we can reach single user mode now. Hardware graciously donated by Douglas Beattie.

Update copyright.

2013-08-27T06:09:28Z

Building upon SVN r254237, disable automated activation of alternate layouts

2013-08-26T23:37:11Z

and add support for default underride to $loader_version, acting as a way to name a release. Release text is not displayed for the aforementioned feature of alternate display layout (introduced in r254237); however, for all other layouts (incl. default), the release name is displayed at lower-right. See version.4th(8) for additional information and/or historical details. NOTE: Also a minor edit to version.4th(8) while we're here.

Set the hint for physical address of RSDP in hexadecimal as before r223262.

2013-08-23T18:52:36Z

src-test2/sys/boot, branch release/10.0.0