src-test2/sys/dev/amr, branch release/4.6.1

MFC revision 1.25 of the amr driver:

2002-04-26T11:25:49Z

In case the driver runs on an HP NetRaid controller, attempt to properly decode the BIOS and firmware version and announce the board as HP NetRaid. This has been tested with a NetRaid 3si controller, the BIOS/firmware printout should also work for other NetRaid controllers but the type detection for other NetRaids (such as the 1si) will not work due to the lack of hardware.

MFC: signature check for older i960-based adapters.

2000-12-22T22:24:32Z

MFC: remove excessive debugging code.

2000-11-28T20:52:30Z

Fix amr_map_command so that 40LD-specific commands get the scatter-gather

2000-11-28T19:25:28Z

list count in the right place. I don't understand why AMI did it like this, but now the AMI MegaManager can talk to the newer (1600 and later) controllers. Remove an unused variable. Include when necessary. Tweak some debugging levels to make things more intelligible.

MFC: Don't test the result of the command, just pass it back.

2000-11-21T06:58:58Z

MFC: allow override by loaded module by reducing PCI probe priority.

2000-10-28T10:48:09Z

MFC: updated AMI MegaRAID driver. Brings back support for new adapters

2000-10-28T10:17:01Z

(all known AMI MegaRAID adapters are now supported), bug fixes and an ioctl interface for array management. AMI plan to release binary versions of their array admin tools which will use this interface.

This commit was manufactured by cvs2svn to create branch 'RELENG_4'.

2000-10-28T09:56:35Z

Don't scan for still-open devices on shutdown; if the root filesystem is

2000-10-24T09:22:55Z

mounted on a drive, it won't have been closed. This should fix problems that people are having with unclean shutdowns.

This commit was manufactured by cvs2svn to create branch 'RELENG_4'.

2000-08-30T11:04:52Z