src-test2/sys/dev/cs, branch release/5.2.1_cvsFreeBSD source treehttps://cgit-dev.freebsd.org/src-test2/atom?h=release%2F5.2.1_cvs2004-02-23T15:32:56ZThis commit was manufactured by cvs2svn to create tag2004-02-23T15:32:56Zcvs2svncvs2svn@FreeBSD.org2004-02-23T15:32:56Zurn:sha1:84a7b99b4e02a260bf7ff9b540032f4cb7bc612a
'RELENG_5_2_1_RELEASE'.
This commit was manufactured to restore the state of the 5.2.1-RELEASE image.
Releases prior to 5.3-RELEASE are omitting the secure/ and crypto/ subdirs.
o Add sysctl to allow ignoring checksum of eeprom.2003-11-04T02:59:57ZWarner Loshimp@FreeBSD.org2003-11-04T02:59:57Zurn:sha1:fcedf425bd5046d68ffa6777f1cc48bc9cb62425
o Fix minor type problems
o Fix minor problem with a couple debug printfs.
o Default to a sane media type when none is reported.
o Minor style changes
The PR complains this will fix the IBM 300GL cards.
Submitted by: Max Gotlib
PR: 11462
Replace the if_name and if_unit members of struct ifnet with new members2003-10-31T18:32:15ZBrooks Davisbrooks@FreeBSD.org2003-10-31T18:32:15Zurn:sha1:9bf40ede4a299f315bc4b0ae5329631b8c7dc271
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.
Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)
There is no way to enter the attach routine twice with the same softc2003-10-30T19:45:58ZBrooks Davisbrooks@FreeBSD.org2003-10-30T19:45:58Zurn:sha1:c020a92f9f30edcefb75c81b8882ada6e6d50b8d
without a detach call in between so don't try to deal with that
possiability.
This is a diff-reduction commit for the upcoming if_xname conversion.
Use __FBSDID().2003-08-24T17:55:58ZDavid E. O'Brienobrien@FreeBSD.org2003-08-24T17:55:58Zurn:sha1:aad970f1fee9a2a3e5a0f880be9b87c6193b3bd1
Also some minor style cleanups.
- Express hard dependencies on bus (pci, isa, pccard) and2003-04-15T06:37:30ZMatthew N. Doddmdodd@FreeBSD.org2003-04-15T06:37:30Zurn:sha1:f246e4a17fd469ab781124a678e103d44d637c5f
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
such abuse isn't really needed. (And if we do need type information
associated with a module then we should make it explicit and not
use hacks.)
Make sure that pp_name is non-null before setting the device2003-04-10T04:36:02ZWarner Loshimp@FreeBSD.org2003-04-10T04:36:02Zurn:sha1:f5746231ff7652f580d3f8f8ecec3f5fe47f1bdb
description. This allows us to rely entirely on the CIS entries if
necessary...
Back out M_* changes, per decision of the TRB.2003-02-19T05:47:46ZWarner Loshimp@FreeBSD.org2003-02-19T05:47:46Zurn:sha1:a163d034fadcfb4a25ca34a2ba5f491c47b6ff69
Approved by: trb
Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.2003-01-21T08:56:16ZAlfred Perlsteinalfred@FreeBSD.org2003-01-21T08:56:16Zurn:sha1:44956c9863dc03344b03bdf6a83acf4e743f8e50
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
network interface driver changes:2002-11-14T23:54:55ZSam Lefflersam@FreeBSD.org2002-11-14T23:54:55Zurn:sha1:673d91916d8748ecccff3635f1b15cc602a3898e
o don't strip the Ethernet header from inbound packets; pass packets
up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls
Reviewed by: many
Approved by: re