src-test2/sys/dev/sis, branch stable/7

MFC r226478:

2011-12-31T01:10:29Z

Close a race where SIOCGIFMEDIA ioctl get inconsistent link status. Because driver is accessing a common MII structure in mii_pollstat(), updating user supplied structure should be done before dropping a driver lock. Reported by: Karim (fodillemlinkarimi <> gmail dot com)

MFC: r226995 (partially), r227042

2011-11-06T21:11:22Z

- Import the common MII bitbang'ing code from NetBSD and convert drivers to take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 8k. The only potential in-tree users left unconverted are ed(4) and xe(4). Xe(4) generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to it just for the MII bitbang'ing code. Ed(4) has some chip specific things interwinded with the MII bitbang'ing code and it's unclear whether it can be converted to common code, at least not without thorough testing of all the various chips supported by ed(4). The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Obtained from: NetBSD (partially)

MFC: r221407 (partial)

2011-09-11T20:25:57Z

- Let mii_phy_add_media() also announce the support of IFM_NONE. - Add a PHY-specific reset routine is for lxtphy(4) which disables MII interrupts. - Remove redundant checks in NIC drivers for mii->mii_instance not being zero before calling the reset routines because as soon as one PHY driver attaches mii->mii_instance is incremented and we hardly can end up in their media change callbacks etc if no PHY driver has attached as mii_attach() would have failed in that case and not attach a miibus(4) instance. - Convert the mebers of the MII data structure to unsigned where appropriate. This is partly inspired by NetBSD/OpenBSD. - Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that weren't explicitly converted to support flow control before. It's unclear whether flow control actually works with these but typically it should and their net behavior should be more correct with these changes in place than without if the MAC driver sets MIIF_DOPAUSE. Obtained from: NetBSD (partially)

MFC r219102:

2011-03-07T00:44:00Z

Make sure changing ownership of RX descriptor to be done as last operation. Previously ownership was transferred to hardware before setting address of new RX buffer such that it was possible for hardware to use wrong RX buffer address. While here keep compiler from re-ordering instructions by declaring descriptor members volatile. Memory barriers would do the same job but volatile is supposed to be cheaper than using memory barriers, especially on MP systems. Submitted by: marius

MFC r217548:

2011-01-21T00:35:34Z

Rework RX filter programming by providing separate handler for DP8381[56] and SiS 900/7016 controllers. After r212119, sis(4) no longer reinitializes controller if ALLMULTI/PROMISC was changed. However, RX filter handling code assumed some bits of the RX filter is programmed by driver initialization. This caused ALLMULTI/PROMISC configuration is ignored under certain conditions. Fix that issue by reprogramming all bits of RX filter register. While I'm here follow recommended RX filter programming steps recommended by National DP8381[56] data sheet(RX filter should be is disabled before programming). Reported by: Paul Schenkeveld < freebsd () psconsult dot nl > Tested by: Paul Schenkeveld < freebsd () psconsult dot nl >

MFC: r213894, r213896, r214913

2010-11-07T17:38:54Z

Converted the remainder of the NIC drivers to use the mii_attach() introduced in r213878 (MFC'ed to stable/7 in r214685) instead of mii_phy_probe(). Unlike r213893 (MFC'ed to stable/7 in r214910) these are mostly straight forward conversions though.

MFC r214089:

2010-10-23T00:44:16Z

Correct handling of shared interrupt in sis_intr(). r212116 incorrectly released a drver lock for shared interrupt case such that it caused panic. While I'm here check whether driver is still running before serving TX/RX handler. Reported by: Jerahmy Pocott < QUAKENET1 <> optusnet dot com dot au > Tested by: Jerahmy Pocott < QUAKENET1 <> optusnet dot com dot au >

MFC r212167:

2010-10-08T23:34:45Z

Initial WOL support. NS DP8315 was tested but SiS900/SiS7016 was not tested. While I'm here, clean up SIOCSIFCAP handler.

MFC r188463:

2010-10-08T23:29:45Z

Fix shutdown prototypes.

MFC r212166:

2010-10-08T23:14:21Z

Implement initial device suspend/resume method.