src-test2/sys/dev, branch release/4.11.0

MFC rev 1.57: Remove 6422, V100 and add the P600.

2005-01-21T05:28:00Z

Approved by: re (kensmith)

MFS revision 1.50.2.48

2005-01-13T23:03:12Z

date: 2005/01/11 18:25:01; author: kensmith; state: Exp; lines: +1 -1 MFC of an off-by-one fix sos made to HEAD in v1.96 of ata-chipset.c and v1.50 of ata-lowlevel.c. From his log message: Log: Compensate for off by one bugs in disk firmware for 48BIT addressing cutover. Requested by: marck Glanced at by: sos Approved by: re (scottl)

MFC: 1.6; When searching for a suitable block of memory on the free

2005-01-13T22:06:57Z

list, skip blocks that are too big by a factor of two or greater. Approved by: re (kensmith)

This commit was manufactured by cvs2svn to create branch 'RELENG_4_11'.

2005-01-13T01:01:11Z

Merge if_fxp.c:1.221 from HEAD to RELENG_5:

2005-01-12T13:29:03Z

date: 2005/01/04 19:30:14; author: mux; state: Exp; lines: +1 -1 Allow fxp(4) cards with a revision id of 0 to use the 82503 serial interface as well. This is not an expected revision id per the datasheet, but unfortunately there are such cards out there with a 82557 chipset, and they want to use the 82503. PR: kern/75739 Reported by: Andre Albsmeier Approved by: re (kensmith)

Merged from RELENG_4, changes related to the 9.1.5.2 release of twa on the

2005-01-10T23:55:09Z

3ware website. Reviewed by:re Approved by:re MFC after:4 days

MFC: ehci.c 1.5.4.13

2005-01-07T19:23:07Z

Fix a bug where an aborted command was removed from the > queue but not from the hardware's cache of it, leading to the > hardware DMAing into "freed" memory buffers. (leading to crashes when > a usb ransaction was timed, but but eventually happenned) > > along with an associated change to ehcivar.h Approved by: re (ken)

Merge from RELENG_4: 1.3.2.4

2005-01-07T15:15:19Z

Fix a mis-merge in the MFC of rev. 1.64 in rev. 1.3.2.3; the following change wasn't included: - Set the CAM status to CAM_SCSI_STATUS_ERROR rather than CAM_REQ_CMP in case of a CHECK CONDITION. Approved by: re (kensmith)

Added device id support for Intel 82541ER and 82546GB dual port PCI Express adapter.

2005-01-04T23:55:03Z

Corrected a workaround that should only be applied to one adapter. Workaround was causing device hangs when incorrectly applied to other adapters. Approved by: re

MFC: add support for FC929X and add missed mpt(4) manpage.

2005-01-03T16:39:20Z

Approved by: re