src-test2/sys, branch vendor/sym

* The C1010 stepping B0 (Rev 1) tested OK for DT transfers without the U3EN

1999-12-16T17:00:53Z

broken bit work-around enabled. * Fixed a bug that made MDP not work. (However, MDP is actually not tested due to lack of hardware using this feature). * Chip table changed to support the C1010 B0 w/o the U3EN bit work-around enabled. * Add the SYM_SETUP_MAX_LUN, SYM_SETUP_LP_PROBE_MAP (used to tell the driver about chips that are to be claimed with lower priority than old PCI bus based driver (typically the ncr)), SYM_SETUP_SCSI_DIFF, and SYM_SETUP_PCI_PARITY options. Submitted by: Gerard Roudier

Update to the 0.12.0-19991127 patch + my header path & doc changes.

1999-11-28T01:35:29Z

Adjust `sym' include file path to match where `sym' landed in our tree.

1999-11-28T00:45:27Z

Done as vendor import as I hope the author will accept this patch, and I'm not ready to take this thing off the vendor branch yet.

Adjust `sym' include file path to match where `sym' landed in our tree.

1999-11-28T00:39:09Z

Done as vendor import as I hope the author will accept this patch, and I'm not ready to take this thing off the vendor branch yet.

Update to the SYM-0.11.0-19991120 patch.

1999-11-27T23:37:15Z

Submitted by: Gerard Roudier

Update to the SYM-0.10.0-19991111 patch.

1999-11-27T23:35:46Z

Submitted by: Gerard Roudier

New `sym' device driver optimized for the Symbios/LSI 53C896/53C895A/53C1010

1999-11-27T23:32:35Z

PCI SCSI controllers. This driver also supports the following Symbios/LSI PCI SCSI chips: 53C810A, 53C825A, 53C860, 53C875, 53C876, 53C885, 53C895. However, it does NOT support earlier chips as the following ones: 53C810, 53C815, 53C825. See README.sym for more details. Submitted-by: Gerard Roudier