vendor/openssl/1.0.1t

47 files changed, 570 insertions, 148 deletions

diff --git a/CHANGES b/CHANGES
index 19e07abc4619..1c7a5edcb421 100644
--- a/CHANGES
+++ b/CHANGES
@@ -2,6 +2,103 @@
  OpenSSL CHANGES
  _______________
 
+ Changes between 1.0.1s and 1.0.1t [3 May 2016]
+
+  *) Prevent padding oracle in AES-NI CBC MAC check
+
+     A MITM attacker can use a padding oracle attack to decrypt traffic
+     when the connection uses an AES CBC cipher and the server support
+     AES-NI.
+
+     This issue was introduced as part of the fix for Lucky 13 padding
+     attack (CVE-2013-0169). The padding check was rewritten to be in
+     constant time by making sure that always the same bytes are read and
+     compared against either the MAC or padding bytes. But it no longer
+     checked that there was enough data to have both the MAC and padding
+     bytes.
+
+     This issue was reported by Juraj Somorovsky using TLS-Attacker.
+     (CVE-2016-2107)
+     [Kurt Roeckx]
+
+  *) Fix EVP_EncodeUpdate overflow
+
+     An overflow can occur in the EVP_EncodeUpdate() function which is used for
+     Base64 encoding of binary data. If an attacker is able to supply very large
+     amounts of input data then a length check can overflow resulting in a heap
+     corruption.
+
+     Internally to OpenSSL the EVP_EncodeUpdate() function is primarly used by
+     the PEM_write_bio* family of functions. These are mainly used within the
+     OpenSSL command line applications, so any application which processes data
+     from an untrusted source and outputs it as a PEM file should be considered
+     vulnerable to this issue. User applications that call these APIs directly
+     with large amounts of untrusted data may also be vulnerable.
+
+     This issue was reported by Guido Vranken.
+     (CVE-2016-2105)
+     [Matt Caswell]
+
+  *) Fix EVP_EncryptUpdate overflow
+
+     An overflow can occur in the EVP_EncryptUpdate() function. If an attacker
+     is able to supply very large amounts of input data after a previous call to
+     EVP_EncryptUpdate() with a partial block then a length check can overflow
+     resulting in a heap corruption. Following an analysis of all OpenSSL
+     internal usage of the EVP_EncryptUpdate() function all usage is one of two
+     forms. The first form is where the EVP_EncryptUpdate() call is known to be
+     the first called function after an EVP_EncryptInit(), and therefore that
+     specific call must be safe. The second form is where the length passed to
+     EVP_EncryptUpdate() can be seen from the code to be some small value and
+     therefore there is no possibility of an overflow. Since all instances are
+     one of these two forms, it is believed that there can be no overflows in
+     internal code due to this problem. It should be noted that
+     EVP_DecryptUpdate() can call EVP_EncryptUpdate() in certain code paths.
+     Also EVP_CipherUpdate() is a synonym for EVP_EncryptUpdate(). All instances
+     of these calls have also been analysed too and it is believed there are no
+     instances in internal usage where an overflow could occur.
+
+     This issue was reported by Guido Vranken.
+     (CVE-2016-2106)
+     [Matt Caswell]
+
+  *) Prevent ASN.1 BIO excessive memory allocation
+
+     When ASN.1 data is read from a BIO using functions such as d2i_CMS_bio()
+     a short invalid encoding can casuse allocation of large amounts of memory
+     potentially consuming excessive resources or exhausting memory.
+
+     Any application parsing untrusted data through d2i BIO functions is
+     affected. The memory based functions such as d2i_X509() are *not* affected.
+     Since the memory based functions are used by the TLS library, TLS
+     applications are not affected.
+
+     This issue was reported by Brian Carpenter.
+     (CVE-2016-2109)
+     [Stephen Henson]
+
+  *) EBCDIC overread
+
+     ASN1 Strings that are over 1024 bytes can cause an overread in applications
+     using the X509_NAME_oneline() function on EBCDIC systems. This could result
+     in arbitrary stack data being returned in the buffer.
+
+     This issue was reported by Guido Vranken.
+     (CVE-2016-2176)
+     [Matt Caswell]
+
+  *) Modify behavior of ALPN to invoke callback after SNI/servername
+     callback, such that updates to the SSL_CTX affect ALPN.
+     [Todd Short]
+
+  *) Remove LOW from the DEFAULT cipher list.  This removes singles DES from the
+     default.
+     [Kurt Roeckx]
+
+  *) Only remove the SSLv2 methods with the no-ssl2-method option. When the
+     methods are enabled and ssl2 is disabled the methods return NULL.
+     [Kurt Roeckx]
+
  Changes between 1.0.1r and 1.0.1s [1 Mar 2016]
 
   * Disable weak ciphers in SSLv3 and up in default builds of OpenSSL.
diff --git a/FREEBSD-upgrade b/FREEBSD-upgrade
index 74969c358451..bcdf6babd349 100644
--- a/FREEBSD-upgrade
+++ b/FREEBSD-upgrade
@@ -11,8 +11,8 @@ First, read http://wiki.freebsd.org/SubversionPrimer/VendorImports
 # Xlist
 setenv XLIST /FreeBSD/work/openssl/svn-FREEBSD-files/FREEBSD-Xlist
 setenv FSVN "svn+ssh://svn.freebsd.org/base"
-setenv OSSLVER 1.0.1r
-# OSSLTAG format: v1_0_1r
+setenv OSSLVER 1.0.1t
+# OSSLTAG format: v1_0_1t
 
 ###setenv OSSLTAG v`echo ${OSSLVER} | tr . _`
 
diff --git a/Makefile b/Makefile
index e5fe2487dfb7..f2c621d58d78 100644
--- a/Makefile
+++ b/Makefile
@@ -4,7 +4,7 @@
 ## Makefile for OpenSSL
 ##
 
-VERSION=1.0.1s
+VERSION=1.0.1t
 MAJOR=1
 MINOR=0.1
 SHLIB_VERSION_NUMBER=1.0.0
diff --git a/NEWS b/NEWS
index 26c7aa5d3341..0fb2cc391a35 100644
--- a/NEWS
+++ b/NEWS
@@ -5,6 +5,19 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
+  Major changes between OpenSSL 1.0.1s and OpenSSL 1.0.1t [3 May 2016]
+
+      o Prevent padding oracle in AES-NI CBC MAC check (CVE-2016-2107)
+      o Fix EVP_EncodeUpdate overflow (CVE-2016-2105)
+      o Fix EVP_EncryptUpdate overflow (CVE-2016-2106)
+      o Prevent ASN.1 BIO excessive memory allocation (CVE-2016-2109)
+      o EBCDIC overread (CVE-2016-2176)
+      o Modify behavior of ALPN to invoke callback after SNI/servername
+        callback, such that updates to the SSL_CTX affect ALPN.
+      o Remove LOW from the DEFAULT cipher list.  This removes singles DES from
+        the default.
+      o Only remove the SSLv2 methods with the no-ssl2-method option.
+
   Major changes between OpenSSL 1.0.1r and OpenSSL 1.0.1s [1 Mar 2016]
 
       o Disable weak ciphers in SSLv3 and up in default builds of OpenSSL.
diff --git a/README b/README
index adde4e8d7e4e..9395f2ba858c 100644
--- a/README
+++ b/README
@@ -1,5 +1,5 @@
 
- OpenSSL 1.0.1s 1 Mar 2016
+ OpenSSL 1.0.1t 3 May 2016
 
  Copyright (c) 1998-2015 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
diff --git a/apps/pkcs7.c b/apps/pkcs7.c
index 643507f216a0..b67763318397 100644
--- a/apps/pkcs7.c
+++ b/apps/pkcs7.c
@@ -235,12 +235,16 @@ int MAIN(int argc, char **argv)
         i = OBJ_obj2nid(p7->type);
         switch (i) {
         case NID_pkcs7_signed:
-            certs = p7->d.sign->cert;
-            crls = p7->d.sign->crl;
+            if (p7->d.sign != NULL) {
+                certs = p7->d.sign->cert;
+                crls = p7->d.sign->crl;
+            }
             break;
         case NID_pkcs7_signedAndEnveloped:
-            certs = p7->d.signed_and_enveloped->cert;
-            crls = p7->d.signed_and_enveloped->crl;
+            if (p7->d.signed_and_enveloped != NULL) {
+                certs = p7->d.signed_and_enveloped->cert;
+                crls = p7->d.signed_and_enveloped->crl;
+            }
             break;
         default:
             break;
diff --git a/crypto/asn1/a_bytes.c b/crypto/asn1/a_bytes.c
index 12715a72809d..385b53986a29 100644
--- a/crypto/asn1/a_bytes.c
+++ b/crypto/asn1/a_bytes.c
@@ -200,13 +200,13 @@ ASN1_STRING *d2i_ASN1_bytes(ASN1_STRING **a, const unsigned char **pp,
     } else {
         if (len != 0) {
             if ((ret->length < len) || (ret->data == NULL)) {
-                if (ret->data != NULL)
-                    OPENSSL_free(ret->data);
                 s = (unsigned char *)OPENSSL_malloc((int)len + 1);
                 if (s == NULL) {
                     i = ERR_R_MALLOC_FAILURE;
                     goto err;
                 }
+                if (ret->data != NULL)
+                    OPENSSL_free(ret->data);
             } else
                 s = ret->data;
             memcpy(s, p, (int)len);
diff --git a/crypto/asn1/a_d2i_fp.c b/crypto/asn1/a_d2i_fp.c
index a1864b42c977..51b6f245ab10 100644
--- a/crypto/asn1/a_d2i_fp.c
+++ b/crypto/asn1/a_d2i_fp.c
@@ -141,6 +141,7 @@ void *ASN1_item_d2i_fp(const ASN1_ITEM *it, FILE *in, void *x)
 #endif
 
 #define HEADER_SIZE   8
+#define ASN1_CHUNK_INITIAL_SIZE (16 * 1024)
 static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb)
 {
     BUF_MEM *b;
@@ -217,29 +218,44 @@ static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb)
             /* suck in c.slen bytes of data */
             want = c.slen;
             if (want > (len - off)) {
+                size_t chunk_max = ASN1_CHUNK_INITIAL_SIZE;
+
                 want -= (len - off);
                 if (want > INT_MAX /* BIO_read takes an int length */  ||
                     len + want < len) {
                     ASN1err(ASN1_F_ASN1_D2I_READ_BIO, ASN1_R_TOO_LONG);
                     goto err;
                 }
-                if (!BUF_MEM_grow_clean(b, len + want)) {
-                    ASN1err(ASN1_F_ASN1_D2I_READ_BIO, ERR_R_MALLOC_FAILURE);
-                    goto err;
-                }
                 while (want > 0) {
-                    i = BIO_read(in, &(b->data[len]), want);
-                    if (i <= 0) {
-                        ASN1err(ASN1_F_ASN1_D2I_READ_BIO,
-                                ASN1_R_NOT_ENOUGH_DATA);
+                    /*
+                     * Read content in chunks of increasing size
+                     * so we can return an error for EOF without
+                     * having to allocate the entire content length
+                     * in one go.
+                     */
+                    size_t chunk = want > chunk_max ? chunk_max : want;
+
+                    if (!BUF_MEM_grow_clean(b, len + chunk)) {
+                        ASN1err(ASN1_F_ASN1_D2I_READ_BIO, ERR_R_MALLOC_FAILURE);
                         goto err;
                     }
+                    want -= chunk;
+                    while (chunk > 0) {
+                        i = BIO_read(in, &(b->data[len]), chunk);
+                        if (i <= 0) {
+                            ASN1err(ASN1_F_ASN1_D2I_READ_BIO,
+                                    ASN1_R_NOT_ENOUGH_DATA);
+                            goto err;
+                        }
                     /*
                      * This can't overflow because |len+want| didn't
                      * overflow.
                      */
-                    len += i;
-                    want -= i;
+                        len += i;
+                        chunk -= i;
+                    }
+                    if (chunk_max < INT_MAX/2)
+                        chunk_max *= 2;
                 }
             }
             if (off + c.slen < off) {
diff --git a/crypto/asn1/a_type.c b/crypto/asn1/a_type.c
index af795306b5bf..bb166e8568b5 100644
--- a/crypto/asn1/a_type.c
+++ b/crypto/asn1/a_type.c
@@ -126,9 +126,7 @@ int ASN1_TYPE_cmp(const ASN1_TYPE *a, const ASN1_TYPE *b)
         result = 0;             /* They do not have content. */
         break;
     case V_ASN1_INTEGER:
-    case V_ASN1_NEG_INTEGER:
     case V_ASN1_ENUMERATED:
-    case V_ASN1_NEG_ENUMERATED:
     case V_ASN1_BIT_STRING:
     case V_ASN1_OCTET_STRING:
     case V_ASN1_SEQUENCE:
diff --git a/crypto/asn1/asn1_lib.c b/crypto/asn1/asn1_lib.c
index 0b61fc930967..874b1af8b09a 100644
--- a/crypto/asn1/asn1_lib.c
+++ b/crypto/asn1/asn1_lib.c
@@ -63,7 +63,7 @@
 #include <openssl/asn1_mac.h>
 
 static int asn1_get_length(const unsigned char **pp, int *inf, long *rl,
-                           int max);
+                           long max);
 static void asn1_put_length(unsigned char **pp, int length);
 const char ASN1_version[] = "ASN.1" OPENSSL_VERSION_PTEXT;
 
@@ -131,7 +131,7 @@ int ASN1_get_object(const unsigned char **pp, long *plength, int *ptag,
     }
     *ptag = tag;
     *pclass = xclass;
-    if (!asn1_get_length(&p, &inf, plength, (int)max))
+    if (!asn1_get_length(&p, &inf, plength, max))
         goto err;
 
     if (inf && !(ret & V_ASN1_CONSTRUCTED))
@@ -159,14 +159,14 @@ int ASN1_get_object(const unsigned char **pp, long *plength, int *ptag,
 }
 
 static int asn1_get_length(const unsigned char **pp, int *inf, long *rl,
-                           int max)
+                           long max)
 {
     const unsigned char *p = *pp;
     unsigned long ret = 0;
-    unsigned int i;
+    unsigned long i;
 
     if (max-- < 1)
-        return (0);
+        return 0;
     if (*p == 0x80) {
         *inf = 1;
         ret = 0;
@@ -175,15 +175,11 @@ static int asn1_get_length(const unsigned char **pp, int *inf, long *rl,
         *inf = 0;
         i = *p & 0x7f;
         if (*(p++) & 0x80) {
-            if (i > sizeof(long))
+            if (i > sizeof(ret) || max < (long)i)
                 return 0;
-            if (max-- == 0)
-                return (0);
             while (i-- > 0) {
                 ret <<= 8L;
                 ret |= *(p++);
-                if (max-- == 0)
-                    return (0);
             }
         } else
             ret = i;
@@ -192,7 +188,7 @@ static int asn1_get_length(const unsigned char **pp, int *inf, long *rl,
         return 0;
     *pp = p;
     *rl = (long)ret;
-    return (1);
+    return 1;
 }
 
 /*
diff --git a/crypto/asn1/asn1_par.c b/crypto/asn1/asn1_par.c
index 0ca985a2be1e..e85e3398b6bb 100644
--- a/crypto/asn1/asn1_par.c
+++ b/crypto/asn1/asn1_par.c
@@ -173,6 +173,8 @@ static int asn1_parse2(BIO *bp, const unsigned char **pp, long length,
         if (!asn1_print_info(bp, tag, xclass, j, (indent) ? depth : 0))
             goto end;
         if (j & V_ASN1_CONSTRUCTED) {
+            const unsigned char *sp;
+
             ep = p + len;
             if (BIO_write(bp, "\n", 1) <= 0)
                 goto end;
@@ -182,6 +184,7 @@ static int asn1_parse2(BIO *bp, const unsigned char **pp, long length,
                 goto end;
             }
             if ((j == 0x21) && (len == 0)) {
+                sp = p;
                 for (;;) {
                     r = asn1_parse2(bp, &p, (long)(tot - p),
                                     offset + (p - *pp), depth + 1,
@@ -190,19 +193,25 @@ static int asn1_parse2(BIO *bp, const unsigned char **pp, long length,
                         ret = 0;
                         goto end;
                     }
-                    if ((r == 2) || (p >= tot))
+                    if ((r == 2) || (p >= tot)) {
+                        len = p - sp;
                         break;
+                    }
                 }
-            } else
+            } else {
+                long tmp = len;
+
                 while (p < ep) {
-                    r = asn1_parse2(bp, &p, (long)len,
-                                    offset + (p - *pp), depth + 1,
+                    sp = p;
+                    r = asn1_parse2(bp, &p, tmp, offset + (p - *pp), depth + 1,
                                     indent, dump);
                     if (r == 0) {
                         ret = 0;
                         goto end;
                     }
+                    tmp -= p - sp;
                 }
+            }
         } else if (xclass != 0) {
             p += len;
             if (BIO_write(bp, "\n", 1) <= 0)
diff --git a/crypto/asn1/t_x509.c b/crypto/asn1/t_x509.c
index 4e7c45dd5ddc..4f69b5113f98 100644
--- a/crypto/asn1/t_x509.c
+++ b/crypto/asn1/t_x509.c
@@ -140,7 +140,8 @@ int X509_print_ex(BIO *bp, X509 *x, unsigned long nmflags,
             goto err;
 
         bs = X509_get_serialNumber(x);
-        if (bs->length <= (int)sizeof(long)) {
+        if (bs->length < (int)sizeof(long)
+            || (bs->length == sizeof(long) && (bs->data[0] & 0x80) == 0)) {
             l = ASN1_INTEGER_get(bs);
             if (bs->type == V_ASN1_NEG_INTEGER) {
                 l = -l;
diff --git a/crypto/asn1/tasn_dec.c b/crypto/asn1/tasn_dec.c
index 9256049d1588..2a13388bfa5d 100644
--- a/crypto/asn1/tasn_dec.c
+++ b/crypto/asn1/tasn_dec.c
@@ -903,9 +903,7 @@ int asn1_ex_c2i(ASN1_VALUE **pval, const unsigned char *cont, int len,
         break;
 
     case V_ASN1_INTEGER:
-    case V_ASN1_NEG_INTEGER:
     case V_ASN1_ENUMERATED:
-    case V_ASN1_NEG_ENUMERATED:
         tint = (ASN1_INTEGER **)pval;
         if (!c2i_ASN1_INTEGER(tint, &cont, len))
             goto err;
diff --git a/crypto/asn1/tasn_enc.c b/crypto/asn1/tasn_enc.c
index f04a6892a8d9..f7f83e56a981 100644
--- a/crypto/asn1/tasn_enc.c
+++ b/crypto/asn1/tasn_enc.c
@@ -611,9 +611,7 @@ int asn1_ex_i2c(ASN1_VALUE **pval, unsigned char *cout, int *putype,
         break;
 
     case V_ASN1_INTEGER:
-    case V_ASN1_NEG_INTEGER:
     case V_ASN1_ENUMERATED:
-    case V_ASN1_NEG_ENUMERATED:
         /*
          * These are all have the same content format as ASN1_INTEGER
          */
diff --git a/crypto/asn1/x_name.c b/crypto/asn1/x_name.c
index 737c426f2dea..a858c2993b90 100644
--- a/crypto/asn1/x_name.c
+++ b/crypto/asn1/x_name.c
@@ -66,6 +66,13 @@
 typedef STACK_OF(X509_NAME_ENTRY) STACK_OF_X509_NAME_ENTRY;
 DECLARE_STACK_OF(STACK_OF_X509_NAME_ENTRY)
 
+/*
+ * Maximum length of X509_NAME: much larger than anything we should
+ * ever see in practice.
+ */
+
+#define X509_NAME_MAX (1024 * 1024)
+
 static int x509_name_ex_d2i(ASN1_VALUE **val,
                             const unsigned char **in, long len,
                             const ASN1_ITEM *it,
@@ -192,6 +199,10 @@ static int x509_name_ex_d2i(ASN1_VALUE **val,
     int i, j, ret;
     STACK_OF(X509_NAME_ENTRY) *entries;
     X509_NAME_ENTRY *entry;
+    if (len > X509_NAME_MAX) {
+        ASN1err(ASN1_F_X509_NAME_EX_D2I, ASN1_R_TOO_LONG);
+        return 0;
+    }
     q = p;
 
     /* Get internal representation of Name */
diff --git a/crypto/asn1/x_x509.c b/crypto/asn1/x_x509.c
index bcd9166c35eb..1500871577d6 100644
--- a/crypto/asn1/x_x509.c
+++ b/crypto/asn1/x_x509.c
@@ -201,9 +201,19 @@ X509 *d2i_X509_AUX(X509 **a, const unsigned char **pp, long length)
 
 int i2d_X509_AUX(X509 *a, unsigned char **pp)
 {
-    int length;
+    int length, tmplen;
+    unsigned char *start = pp != NULL ? *pp : NULL;
     length = i2d_X509(a, pp);
-    if (a)
-        length += i2d_X509_CERT_AUX(a->aux, pp);
+    if (length < 0 || a == NULL)
+        return length;
+
+    tmplen = i2d_X509_CERT_AUX(a->aux, pp);
+    if (tmplen < 0) {
+        if (start != NULL)
+            *pp = start;
+        return tmplen;
+    }
+    length += tmplen;
+
     return length;
 }
diff --git a/crypto/bn/asm/x86-mont.pl b/crypto/bn/asm/x86-mont.pl
index e8f6b050842e..89f4de61e896 100755
--- a/crypto/bn/asm/x86-mont.pl
+++ b/crypto/bn/asm/x86-mont.pl
@@ -85,6 +85,21 @@ $frame=32;				# size of above frame rounded up to 16n
 
 	&and	("esp",-64);		# align to cache line
 
+	# Some OSes, *cough*-dows, insist on stack being "wired" to
+	# physical memory in strictly sequential manner, i.e. if stack
+	# allocation spans two pages, then reference to farmost one can
+	# be punishable by SEGV. But page walking can do good even on
+	# other OSes, because it guarantees that villain thread hits
+	# the guard page before it can make damage to innocent one...
+	&mov	("eax","ebp");
+	&sub	("eax","esp");
+	&and	("eax",-4096);
+&set_label("page_walk");
+	&mov	("edx",&DWP(0,"esp","eax"));
+	&sub	("eax",4096);
+	&data_byte(0x2e);
+	&jnc	(&label("page_walk"));
+
 	################################# load argument block...
 	&mov	("eax",&DWP(0*4,"esi"));# BN_ULONG *rp
 	&mov	("ebx",&DWP(1*4,"esi"));# const BN_ULONG *ap
diff --git a/crypto/bn/asm/x86_64-mont.pl b/crypto/bn/asm/x86_64-mont.pl
index 17fb94c84c9f..c8ae019da1b9 100755
--- a/crypto/bn/asm/x86_64-mont.pl
+++ b/crypto/bn/asm/x86_64-mont.pl
@@ -91,6 +91,20 @@ bn_mul_mont:
 
 	mov	%r11,8(%rsp,$num,8)	# tp[num+1]=%rsp
 .Lmul_body:
+	# Some OSes, *cough*-dows, insist on stack being "wired" to
+	# physical memory in strictly sequential manner, i.e. if stack
+	# allocation spans two pages, then reference to farmost one can
+	# be punishable by SEGV. But page walking can do good even on
+	# other OSes, because it guarantees that villain thread hits
+	# the guard page before it can make damage to innocent one...
+	sub	%rsp,%r11
+	and	\$-4096,%r11
+.Lmul_page_walk:
+	mov	(%rsp,%r11),%r10
+	sub	\$4096,%r11
+	.byte	0x66,0x2e		# predict non-taken
+	jnc	.Lmul_page_walk
+
 	mov	$bp,%r12		# reassign $bp
 ___
 		$bp="%r12";
@@ -296,6 +310,14 @@ bn_mul4x_mont:
 
 	mov	%r11,8(%rsp,$num,8)	# tp[num+1]=%rsp
 .Lmul4x_body:
+	sub	%rsp,%r11
+	and	\$-4096,%r11
+.Lmul4x_page_walk:
+	mov	(%rsp,%r11),%r10
+	sub	\$4096,%r11
+	.byte	0x2e			# predict non-taken
+	jnc	.Lmul4x_page_walk
+
 	mov	$rp,16(%rsp,$num,8)	# tp[num+2]=$rp
 	mov	%rdx,%r12		# reassign $bp
 ___
@@ -707,6 +729,7 @@ $code.=<<___;
 .align	16
 bn_sqr4x_mont:
 .Lsqr4x_enter:
+	mov	%rsp,%rax
 	push	%rbx
 	push	%rbp
 	push	%r12
@@ -715,12 +738,23 @@ bn_sqr4x_mont:
 	push	%r15
 
 	shl	\$3,${num}d		# convert $num to bytes
-	xor	%r10,%r10
 	mov	%rsp,%r11		# put aside %rsp
-	sub	$num,%r10		# -$num
+	neg	$num			# -$num
 	mov	($n0),$n0		# *n0
-	lea	-72(%rsp,%r10,2),%rsp	# alloca(frame+2*$num)
+	lea	-72(%rsp,$num,2),%rsp	# alloca(frame+2*$num)
 	and	\$-1024,%rsp		# minimize TLB usage
+
+	sub	%rsp,%r11
+	and	\$-4096,%r11
+.Lsqr4x_page_walk:
+	mov	(%rsp,%r11),%r10
+	sub	\$4096,%r11
+	.byte	0x2e			# predict non-taken
+	jnc	.Lsqr4x_page_walk
+
+	mov	$num,%r10
+	neg	$num			# restore $num
+	lea	-48(%rax),%r11		# restore saved %rsp
 	##############################################################
 	# Stack layout
 	#
diff --git a/crypto/bn/asm/x86_64-mont5.pl b/crypto/bn/asm/x86_64-mont5.pl
index 235979181f54..99243ae3ec2c 100755
--- a/crypto/bn/asm/x86_64-mont5.pl
+++ b/crypto/bn/asm/x86_64-mont5.pl
@@ -84,6 +84,20 @@ bn_mul_mont_gather5:
 
 	mov	%rax,8(%rsp,$num,8)	# tp[num+1]=%rsp
 .Lmul_body:
+	# Some OSes, *cough*-dows, insist on stack being "wired" to
+	# physical memory in strictly sequential manner, i.e. if stack
+	# allocation spans two pages, then reference to farmost one can
+	# be punishable by SEGV. But page walking can do good even on
+	# other OSes, because it guarantees that villain thread hits
+	# the guard page before it can make damage to innocent one...
+	sub	%rsp,%rax
+	and	\$-4096,%rax
+.Lmul_page_walk:
+	mov	(%rsp,%rax),%r11
+	sub	\$4096,%rax
+	.byte	0x2e			# predict non-taken
+	jnc	.Lmul_page_walk
+
 	lea	128($bp),%r12		# reassign $bp (+size optimization)
 ___
 		$bp="%r12";
@@ -407,6 +421,14 @@ bn_mul4x_mont_gather5:
 
 	mov	%rax,8(%rsp,$num,8)	# tp[num+1]=%rsp
 .Lmul4x_body:
+	sub	%rsp,%rax
+	and	\$-4096,%rax
+.Lmul4x_page_walk:
+	mov	(%rsp,%rax),%r11
+	sub	\$4096,%rax
+	.byte	0x2e			# predict non-taken
+	jnc	.Lmul4x_page_walk
+
 	mov	$rp,16(%rsp,$num,8)	# tp[num+2]=$rp
 	lea	128(%rdx),%r12		# reassign $bp (+size optimization)
 ___
diff --git a/crypto/comp/comp.h b/crypto/comp/comp.h
index 406c428aaeed..60a073404e92 100644
--- a/crypto/comp/comp.h
+++ b/crypto/comp/comp.h
@@ -4,6 +4,10 @@
 
 # include <openssl/crypto.h>
 
+# ifdef OPENSSL_NO_COMP
+#  error COMP is disabled.
+# endif
+
 #ifdef  __cplusplus
 extern "C" {
 #endif
diff --git a/crypto/evp/Makefile b/crypto/evp/Makefile
index ed1502d3a694..c0f834b3ada6 100644
--- a/crypto/evp/Makefile
+++ b/crypto/evp/Makefile
@@ -199,8 +199,8 @@ e_aes.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
 e_aes.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
 e_aes.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
 e_aes.o: ../modes/modes_lcl.h e_aes.c evp_locl.h
-e_aes_cbc_hmac_sha1.o: ../../include/openssl/aes.h ../../include/openssl/asn1.h
-e_aes_cbc_hmac_sha1.o: ../../include/openssl/bio.h
+e_aes_cbc_hmac_sha1.o: ../../e_os.h ../../include/openssl/aes.h
+e_aes_cbc_hmac_sha1.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
 e_aes_cbc_hmac_sha1.o: ../../include/openssl/crypto.h
 e_aes_cbc_hmac_sha1.o: ../../include/openssl/e_os2.h
 e_aes_cbc_hmac_sha1.o: ../../include/openssl/evp.h
@@ -212,8 +212,8 @@ e_aes_cbc_hmac_sha1.o: ../../include/openssl/ossl_typ.h
 e_aes_cbc_hmac_sha1.o: ../../include/openssl/safestack.h
 e_aes_cbc_hmac_sha1.o: ../../include/openssl/sha.h
 e_aes_cbc_hmac_sha1.o: ../../include/openssl/stack.h
-e_aes_cbc_hmac_sha1.o: ../../include/openssl/symhacks.h e_aes_cbc_hmac_sha1.c
-e_aes_cbc_hmac_sha1.o: evp_locl.h
+e_aes_cbc_hmac_sha1.o: ../../include/openssl/symhacks.h ../constant_time_locl.h
+e_aes_cbc_hmac_sha1.o: e_aes_cbc_hmac_sha1.c evp_locl.h
 e_bf.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
 e_bf.o: ../../include/openssl/blowfish.h ../../include/openssl/buffer.h
 e_bf.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
diff --git a/crypto/evp/digest.c b/crypto/evp/digest.c
index 2e202c8fe031..32167b294db1 100644
--- a/crypto/evp/digest.c
+++ b/crypto/evp/digest.c
@@ -200,8 +200,10 @@ int EVP_DigestInit_ex(EVP_MD_CTX *ctx, const EVP_MD *type, ENGINE *impl)
     }
 #endif
     if (ctx->digest != type) {
-        if (ctx->digest && ctx->digest->ctx_size)
+        if (ctx->digest && ctx->digest->ctx_size) {
             OPENSSL_free(ctx->md_data);
+            ctx->md_data = NULL;
+        }
         ctx->digest = type;
         if (!(ctx->flags & EVP_MD_CTX_FLAG_NO_INIT) && type->ctx_size) {
             ctx->update = type->update;
diff --git a/crypto/evp/e_aes_cbc_hmac_sha1.c b/crypto/evp/e_aes_cbc_hmac_sha1.c
index d1f5928f628a..1d598db3598c 100644
--- a/crypto/evp/e_aes_cbc_hmac_sha1.c
+++ b/crypto/evp/e_aes_cbc_hmac_sha1.c
@@ -59,6 +59,7 @@
 # include <openssl/aes.h>
 # include <openssl/sha.h>
 # include "evp_locl.h"
+# include "constant_time_locl.h"
 
 # ifndef EVP_CIPH_FLAG_AEAD_CIPHER
 #  define EVP_CIPH_FLAG_AEAD_CIPHER       0x200000
@@ -286,6 +287,8 @@ static int aesni_cbc_hmac_sha1_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
             maxpad |= (255 - maxpad) >> (sizeof(maxpad) * 8 - 8);
             maxpad &= 255;
 
+            ret &= constant_time_ge(maxpad, pad);
+
             inp_len = len - (SHA_DIGEST_LENGTH + pad + 1);
             mask = (0 - ((inp_len - len) >> (sizeof(inp_len) * 8 - 1)));
             inp_len &= mask;
diff --git a/crypto/evp/encode.c b/crypto/evp/encode.c
index c6abc4ae8e47..c6c775e0a0cd 100644
--- a/crypto/evp/encode.c
+++ b/crypto/evp/encode.c
@@ -57,6 +57,7 @@
  */
 
 #include <stdio.h>
+#include <limits.h>
 #include "cryptlib.h"
 #include <openssl/evp.h>
 
@@ -151,13 +152,13 @@ void EVP_EncodeUpdate(EVP_ENCODE_CTX *ctx, unsigned char *out, int *outl,
                       const unsigned char *in, int inl)
 {
     int i, j;
-    unsigned int total = 0;
+    size_t total = 0;
 
     *outl = 0;
     if (inl <= 0)
         return;
     OPENSSL_assert(ctx->length <= (int)sizeof(ctx->enc_data));
-    if ((ctx->num + inl) < ctx->length) {
+    if (ctx->length - ctx->num > inl) {
         memcpy(&(ctx->enc_data[ctx->num]), in, inl);
         ctx->num += inl;
         return;
@@ -174,7 +175,7 @@ void EVP_EncodeUpdate(EVP_ENCODE_CTX *ctx, unsigned char *out, int *outl,
         *out = '\0';
         total = j + 1;
     }
-    while (inl >= ctx->length) {
+    while (inl >= ctx->length && total <= INT_MAX) {
         j = EVP_EncodeBlock(out, in, ctx->length);
         in += ctx->length;
         inl -= ctx->length;
@@ -183,6 +184,11 @@ void EVP_EncodeUpdate(EVP_ENCODE_CTX *ctx, unsigned char *out, int *outl,
         *out = '\0';
         total += j + 1;
     }
+    if (total > INT_MAX) {
+        /* Too much output data! */
+        *outl = 0;
+        return;
+    }
     if (inl != 0)
         memcpy(&(ctx->enc_data[0]), in, inl);
     ctx->num = inl;
diff --git a/crypto/evp/evp_enc.c b/crypto/evp/evp_enc.c
index 4e983c4bda23..1831572d6f3b 100644
--- a/crypto/evp/evp_enc.c
+++ b/crypto/evp/evp_enc.c
@@ -334,7 +334,7 @@ int EVP_EncryptUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl,
     bl = ctx->cipher->block_size;
     OPENSSL_assert(bl <= (int)sizeof(ctx->buf));
     if (i != 0) {
-        if (i + inl < bl) {
+        if (bl - i > inl) {
             memcpy(&(ctx->buf[i]), in, inl);
             ctx->buf_len += inl;
             *outl = 0;
diff --git a/crypto/opensslv.h b/crypto/opensslv.h
index 4ec6ff955246..2f293232f44c 100644
--- a/crypto/opensslv.h
+++ b/crypto/opensslv.h
@@ -30,11 +30,11 @@ extern "C" {
  * (Prior to 0.9.5a beta1, a different scheme was used: MMNNFFRBB for
  *  major minor fix final patch/beta)
  */
-# define OPENSSL_VERSION_NUMBER  0x1000113fL
+# define OPENSSL_VERSION_NUMBER  0x1000114fL
 # ifdef OPENSSL_FIPS
-#  define OPENSSL_VERSION_TEXT    "OpenSSL 1.0.1s-fips  1 Mar 2016"
+#  define OPENSSL_VERSION_TEXT    "OpenSSL 1.0.1t-fips  3 May 2016"
 # else
-#  define OPENSSL_VERSION_TEXT    "OpenSSL 1.0.1s  1 Mar 2016"
+#  define OPENSSL_VERSION_TEXT    "OpenSSL 1.0.1t  3 May 2016"
 # endif
 # define OPENSSL_VERSION_PTEXT   " part of " OPENSSL_VERSION_TEXT
 
diff --git a/crypto/pem/pem_lib.c b/crypto/pem/pem_lib.c
index 55071616e203..ab45a84fa265 100644
--- a/crypto/pem/pem_lib.c
+++ b/crypto/pem/pem_lib.c
@@ -344,7 +344,7 @@ int PEM_ASN1_write_bio(i2d_of_void *i2d, const char *name, BIO *bp,
 
     if (enc != NULL) {
         objstr = OBJ_nid2sn(EVP_CIPHER_nid(enc));
-        if (objstr == NULL) {
+        if (objstr == NULL || EVP_CIPHER_iv_length(enc) == 0) {
             PEMerr(PEM_F_PEM_ASN1_WRITE_BIO, PEM_R_UNSUPPORTED_CIPHER);
             goto err;
         }
diff --git a/crypto/pem/pvkfmt.c b/crypto/pem/pvkfmt.c
index 82d45273ed16..61864468f6d4 100644
--- a/crypto/pem/pvkfmt.c
+++ b/crypto/pem/pvkfmt.c
@@ -131,6 +131,10 @@ static int read_lebn(const unsigned char **in, unsigned int nbyte, BIGNUM **r)
 # define MS_PVKMAGIC             0xb0b5f11eL
 /* Salt length for PVK files */
 # define PVK_SALTLEN             0x10
+/* Maximum length in PVK header */
+# define PVK_MAX_KEYLEN          102400
+/* Maximum salt length */
+# define PVK_MAX_SALTLEN         10240
 
 static EVP_PKEY *b2i_rsa(const unsigned char **in, unsigned int length,
                          unsigned int bitlen, int ispub);
@@ -644,6 +648,9 @@ static int do_PVK_header(const unsigned char **in, unsigned int length,
     *psaltlen = read_ledword(&p);
     *pkeylen = read_ledword(&p);
 
+    if (*pkeylen > PVK_MAX_KEYLEN || *psaltlen > PVK_MAX_SALTLEN)
+        return 0;
+
     if (is_encrypted && !*psaltlen) {
         PEMerr(PEM_F_DO_PVK_HEADER, PEM_R_INCONSISTENT_HEADER);
         return 0;
diff --git a/crypto/x509/x509.h b/crypto/x509/x509.h
index a4911741005e..bd600de43107 100644
--- a/crypto/x509/x509.h
+++ b/crypto/x509/x509.h
@@ -1281,6 +1281,7 @@ void ERR_load_X509_strings(void);
 # define X509_R_LOADING_CERT_DIR                          103
 # define X509_R_LOADING_DEFAULTS                          104
 # define X509_R_METHOD_NOT_SUPPORTED                      124
+# define X509_R_NAME_TOO_LONG                             134
 # define X509_R_NO_CERT_SET_FOR_US_TO_VERIFY              105
 # define X509_R_PUBLIC_KEY_DECODE_ERROR                   125
 # define X509_R_PUBLIC_KEY_ENCODE_ERROR                   126
diff --git a/crypto/x509/x509_err.c b/crypto/x509/x509_err.c
index 61a19f74109b..a2b8b7fc358f 100644
--- a/crypto/x509/x509_err.c
+++ b/crypto/x509/x509_err.c
@@ -145,6 +145,7 @@ static ERR_STRING_DATA X509_str_reasons[] = {
     {ERR_REASON(X509_R_LOADING_CERT_DIR), "loading cert dir"},
     {ERR_REASON(X509_R_LOADING_DEFAULTS), "loading defaults"},
     {ERR_REASON(X509_R_METHOD_NOT_SUPPORTED), "method not supported"},
+    {ERR_REASON(X509_R_NAME_TOO_LONG), "name too long"},
     {ERR_REASON(X509_R_NO_CERT_SET_FOR_US_TO_VERIFY),
      "no cert set for us to verify"},
     {ERR_REASON(X509_R_PUBLIC_KEY_DECODE_ERROR), "public key decode error"},
diff --git a/crypto/x509/x509_obj.c b/crypto/x509/x509_obj.c
index d317f3af25c0..3de3ac720411 100644
--- a/crypto/x509/x509_obj.c
+++ b/crypto/x509/x509_obj.c
@@ -63,6 +63,13 @@
 #include <openssl/x509.h>
 #include <openssl/buffer.h>
 
+/*
+ * Limit to ensure we don't overflow: much greater than
+ * anything enountered in practice.
+ */
+
+#define NAME_ONELINE_MAX    (1024 * 1024)
+
 char *X509_NAME_oneline(X509_NAME *a, char *buf, int len)
 {
     X509_NAME_ENTRY *ne;
@@ -86,6 +93,8 @@ char *X509_NAME_oneline(X509_NAME *a, char *buf, int len)
             goto err;
         b->data[0] = '\0';
         len = 200;
+    } else if (len == 0) {
+        return NULL;
     }
     if (a == NULL) {
         if (b) {
@@ -110,6 +119,10 @@ char *X509_NAME_oneline(X509_NAME *a, char *buf, int len)
 
         type = ne->value->type;
         num = ne->value->length;
+        if (num > NAME_ONELINE_MAX) {
+            X509err(X509_F_X509_NAME_ONELINE, X509_R_NAME_TOO_LONG);
+            goto end;
+        }
         q = ne->value->data;
 #ifdef CHARSET_EBCDIC
         if (type == V_ASN1_GENERALSTRING ||
@@ -117,8 +130,9 @@ char *X509_NAME_oneline(X509_NAME *a, char *buf, int len)
             type == V_ASN1_PRINTABLESTRING ||
             type == V_ASN1_TELETEXSTRING ||
             type == V_ASN1_VISIBLESTRING || type == V_ASN1_IA5STRING) {
-            ascii2ebcdic(ebcdic_buf, q, (num > sizeof ebcdic_buf)
-                         ? sizeof ebcdic_buf : num);
+            if (num > (int)sizeof(ebcdic_buf))
+                num = sizeof(ebcdic_buf);
+            ascii2ebcdic(ebcdic_buf, q, num);
             q = ebcdic_buf;
         }
 #endif
@@ -154,6 +168,10 @@ char *X509_NAME_oneline(X509_NAME *a, char *buf, int len)
 
         lold = l;
         l += 1 + l1 + 1 + l2;
+        if (l > NAME_ONELINE_MAX) {
+            X509err(X509_F_X509_NAME_ONELINE, X509_R_NAME_TOO_LONG);
+            goto end;
+        }
         if (b != NULL) {
             if (!BUF_MEM_grow(b, l + 1))
                 goto err;
@@ -206,7 +224,7 @@ char *X509_NAME_oneline(X509_NAME *a, char *buf, int len)
     return (p);
  err:
     X509err(X509_F_X509_NAME_ONELINE, ERR_R_MALLOC_FAILURE);
-    if (b != NULL)
-        BUF_MEM_free(b);
+ end:
+    BUF_MEM_free(b);
     return (NULL);
 }
diff --git a/doc/apps/ciphers.pod b/doc/apps/ciphers.pod
index 888b8ed9434b..34bb816f3968 100644
--- a/doc/apps/ciphers.pod
+++ b/doc/apps/ciphers.pod
@@ -107,7 +107,7 @@ The following is a list of all permitted cipher strings and their meanings.
 
 The default cipher list.
 This is determined at compile time and is normally
-B<ALL:!EXPORT:!aNULL:!eNULL:!SSLv2>.
+B<ALL:!EXPORT:!LOW:!aNULL:!eNULL:!SSLv2>.
 When used, this must be the first cipherstring specified.
 
 =item B<COMPLEMENTOFDEFAULT>
diff --git a/doc/crypto/EVP_EncodeInit.pod b/doc/crypto/EVP_EncodeInit.pod
new file mode 100644
index 000000000000..c6f12674f632
--- /dev/null
+++ b/doc/crypto/EVP_EncodeInit.pod
@@ -0,0 +1,127 @@
+=pod
+
+=head1 NAME
+
+EVP_EncodeInit, EVP_EncodeUpdate, EVP_EncodeFinal, EVP_EncodeBlock,
+EVP_DecodeInit, EVP_DecodeUpdate, EVP_DecodeFinal, EVP_DecodeBlock - EVP base 64
+encode/decode routines
+
+=head1 SYNOPSIS
+
+ #include <openssl/evp.h>
+
+ void EVP_EncodeInit(EVP_ENCODE_CTX *ctx);
+ void EVP_EncodeUpdate(EVP_ENCODE_CTX *ctx, unsigned char *out, int *outl,
+                       const unsigned char *in, int inl);
+ void EVP_EncodeFinal(EVP_ENCODE_CTX *ctx, unsigned char *out, int *outl);
+ int EVP_EncodeBlock(unsigned char *t, const unsigned char *f, int n);
+
+ void EVP_DecodeInit(EVP_ENCODE_CTX *ctx);
+ int EVP_DecodeUpdate(EVP_ENCODE_CTX *ctx, unsigned char *out, int *outl,
+                      const unsigned char *in, int inl);
+ int EVP_DecodeFinal(EVP_ENCODE_CTX *ctx, unsigned
+                     char *out, int *outl);
+ int EVP_DecodeBlock(unsigned char *t, const unsigned char *f, int n);
+
+=head1 DESCRIPTION
+
+The EVP encode routines provide a high level interface to base 64 encoding and
+decoding. Base 64 encoding converts binary data into a printable form that uses
+the characters A-Z, a-z, 0-9, "+" and "/" to represent the data. For every 3
+bytes of binary data provided 4 bytes of base 64 encoded data will be produced
+plus some occasional newlines (see below). If the input data length is not a
+multiple of 3 then the output data will be padded at the end using the "="
+character.
+
+Encoding of binary data is performed in blocks of 48 input bytes (or less for
+the final block). For each 48 byte input block encoded 64 bytes of base 64 data
+is output plus an additional newline character (i.e. 65 bytes in total). The
+final block (which may be less than 48 bytes) will output 4 bytes for every 3
+bytes of input. If the data length is not divisible by 3 then a full 4 bytes is
+still output for the final 1 or 2 bytes of input. Similarly a newline character
+will also be output.
+
+EVP_EncodeInit() initialises B<ctx> for the start of a new encoding operation.
+
+EVP_EncodeUpdate() encode B<inl> bytes of data found in the buffer pointed to by
+B<in>. The output is stored in the buffer B<out> and the number of bytes output
+is stored in B<*outl>. It is the caller's responsibility to ensure that the
+buffer at B<out> is sufficiently large to accommodate the output data. Only full
+blocks of data (48 bytes) will be immediately processed and output by this
+function. Any remainder is held in the B<ctx> object and will be processed by a
+subsequent call to EVP_EncodeUpdate() or EVP_EncodeFinal(). To calculate the
+required size of the output buffer add together the value of B<inl> with the
+amount of unprocessed data held in B<ctx> and divide the result by 48 (ignore
+any remainder). This gives the number of blocks of data that will be processed.
+Ensure the output buffer contains 65 bytes of storage for each block, plus an
+additional byte for a NUL terminator. EVP_EncodeUpdate() may be called
+repeatedly to process large amounts of input data. In the event of an error
+EVP_EncodeUpdate() will set B<*outl> to 0.
+
+EVP_EncodeFinal() must be called at the end of an encoding operation. It will
+process any partial block of data remaining in the B<ctx> object. The output
+data will be stored in B<out> and the length of the data written will be stored
+in B<*outl>. It is the caller's responsibility to ensure that B<out> is
+sufficiently large to accommodate the output data which will never be more than
+65 bytes plus an additional NUL terminator (i.e. 66 bytes in total).
+
+EVP_EncodeBlock() encodes a full block of input data in B<f> and of length
+B<dlen> and stores it in B<t>. For every 3 bytes of input provided 4 bytes of
+output data will be produced. If B<dlen> is not divisible by 3 then the block is
+encoded as a final block of data and the output is padded such that it is always
+divisible by 4. Additionally a NUL terminator character will be added. For
+example if 16 bytes of input data is provided then 24 bytes of encoded data is
+created plus 1 byte for a NUL terminator (i.e. 25 bytes in total). The length of
+the data generated I<without> the NUL terminator is returned from the function.
+
+EVP_DecodeInit() initialises B<ctx> for the start of a new decoding operation.
+
+EVP_DecodeUpdate() decodes B<inl> characters of data found in the buffer pointed
+to by B<in>. The output is stored in the buffer B<out> and the number of bytes
+output is stored in B<*outl>. It is the caller's responsibility to ensure that
+the buffer at B<out> is sufficiently large to accommodate the output data. This
+function will attempt to decode as much data as possible in 4 byte chunks. Any
+whitespace, newline or carriage return characters are ignored. Any partial chunk
+of unprocessed data (1, 2 or 3 bytes) that remains at the end will be held in
+the B<ctx> object and processed by a subsequent call to EVP_DecodeUpdate(). If
+any illegal base 64 characters are encountered or if the base 64 padding
+character "=" is encountered in the middle of the data then the function returns
+-1 to indicate an error. A return value of 0 or 1 indicates successful
+processing of the data. A return value of 0 additionally indicates that the last
+input data characters processed included the base 64 padding character "=" and
+therefore no more non-padding character data is expected to be processed. For
+every 4 valid base 64 bytes processed (ignoring whitespace, carriage returns and
+line feeds), 3 bytes of binary output data will be produced (or less at the end
+of the data where the padding character "=" has been used).
+
+EVP_DecodeFinal() must be called at the end of a decoding operation. If there
+is any unprocessed data still in B<ctx> then the input data must not have been
+a multiple of 4 and therefore an error has occurred. The function will return -1
+in this case. Otherwise the function returns 1 on success.
+
+EVP_DecodeBlock() will decode the block of B<n> characters of base 64 data
+contained in B<f> and store the result in B<t>. Any leading whitespace will be
+trimmed as will any trailing whitespace, newlines, carriage returns or EOF
+characters. After such trimming the length of the data in B<f> must be divisbile
+by 4. For every 4 input bytes exactly 3 output bytes will be produced. The
+output will be padded with 0 bits if necessary to ensure that the output is
+always 3 bytes for every 4 input bytes. This function will return the length of
+the data decoded or -1 on error.
+
+=head1 RETURN VALUES
+
+EVP_EncodeBlock() returns the number of bytes encoded excluding the NUL
+terminator.
+
+EVP_DecodeUpdate() returns -1 on error and 0 or 1 on success. If 0 is returned
+then no more non-padding base 64 characters are expected.
+
+EVP_DecodeFinal() returns -1 on error or 1 on success.
+
+EVP_DecodeBlock() returns the length of the data decoded or -1 on error.
+
+=head1 SEE ALSO
+
+L<evp(3)>
+
+=cut
diff --git a/doc/crypto/evp.pod b/doc/crypto/evp.pod
index 9faa349243af..83fefe511a75 100644
--- a/doc/crypto/evp.pod
+++ b/doc/crypto/evp.pod
@@ -25,6 +25,10 @@ functions.  The B<EVP_Digest>I<...> functions provide message digests.
 The B<EVP_PKEY>I<...> functions provide a high level interface to
 asymmetric algorithms.
 
+The L<B<EVP_Encode>I<...>|EVP_EncodeInit(3)> and
+L<B<EVP_Decode>I<...>|EVP_EncodeInit(3)> functions implement base 64 encoding
+and decoding.
+
 Algorithms are loaded with OpenSSL_add_all_algorithms(3).
 
 All the symmetric algorithms (ciphers), digests and asymmetric algorithms
@@ -49,6 +53,7 @@ L<EVP_OpenInit(3)|EVP_OpenInit(3)>,
 L<EVP_SealInit(3)|EVP_SealInit(3)>,
 L<EVP_SignInit(3)|EVP_SignInit(3)>,
 L<EVP_VerifyInit(3)|EVP_VerifyInit(3)>,
+L<EVP_EncodeInit(3)>,
 L<OpenSSL_add_all_algorithms(3)|OpenSSL_add_all_algorithms(3)>,
 L<engine(3)|engine(3)>
 
diff --git a/ssl/d1_both.c b/ssl/d1_both.c
index aaa18677ceef..19c3da616122 100644
--- a/ssl/d1_both.c
+++ b/ssl/d1_both.c
@@ -1579,6 +1579,8 @@ int dtls1_process_heartbeat(SSL *s)
          * plus 2 bytes payload length, plus payload, plus padding
          */
         buffer = OPENSSL_malloc(write_length);
+        if (buffer == NULL)
+            return -1;
         bp = buffer;
 
         /* Enter response type, length and copy payload */
diff --git a/ssl/s2_lib.c b/ssl/s2_lib.c
index 82c173154980..7bcb81a11e2c 100644
--- a/ssl/s2_lib.c
+++ b/ssl/s2_lib.c
@@ -150,7 +150,7 @@ OPENSSL_GLOBAL const SSL_CIPHER ssl2_ciphers[] = {
      SSL_RC4,
      SSL_MD5,
      SSL_SSLV2,
-     SSL_NOT_EXP | SSL_MEDIUM,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_MEDIUM,
      0,
      128,
      128,
@@ -167,7 +167,7 @@ OPENSSL_GLOBAL const SSL_CIPHER ssl2_ciphers[] = {
      SSL_RC4,
      SSL_MD5,
      SSL_SSLV2,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL2_CF_5_BYTE_ENC,
      40,
      128,
@@ -184,7 +184,7 @@ OPENSSL_GLOBAL const SSL_CIPHER ssl2_ciphers[] = {
      SSL_RC2,
      SSL_MD5,
      SSL_SSLV2,
-     SSL_NOT_EXP | SSL_MEDIUM,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_MEDIUM,
      0,
      128,
      128,
@@ -201,7 +201,7 @@ OPENSSL_GLOBAL const SSL_CIPHER ssl2_ciphers[] = {
      SSL_RC2,
      SSL_MD5,
      SSL_SSLV2,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL2_CF_5_BYTE_ENC,
      40,
      128,
@@ -219,7 +219,7 @@ OPENSSL_GLOBAL const SSL_CIPHER ssl2_ciphers[] = {
      SSL_IDEA,
      SSL_MD5,
      SSL_SSLV2,
-     SSL_NOT_EXP | SSL_MEDIUM,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_MEDIUM,
      0,
      128,
      128,
@@ -237,7 +237,7 @@ OPENSSL_GLOBAL const SSL_CIPHER ssl2_ciphers[] = {
      SSL_DES,
      SSL_MD5,
      SSL_SSLV2,
-     SSL_NOT_EXP | SSL_LOW,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_LOW,
      0,
      56,
      56,
@@ -254,7 +254,7 @@ OPENSSL_GLOBAL const SSL_CIPHER ssl2_ciphers[] = {
      SSL_3DES,
      SSL_MD5,
      SSL_SSLV2,
-     SSL_NOT_EXP | SSL_HIGH,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH,
      0,
      112,
      168,
@@ -271,7 +271,7 @@ OPENSSL_GLOBAL const SSL_CIPHER ssl2_ciphers[] = {
      SSL_RC4,
      SSL_MD5,
      SSL_SSLV2,
-     SSL_NOT_EXP | SSL_LOW,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_LOW,
      SSL2_CF_8_BYTE_ENC,
      64,
      64,
diff --git a/ssl/s2_meth.c b/ssl/s2_meth.c
index b312f1726612..73885b7ecff8 100644
--- a/ssl/s2_meth.c
+++ b/ssl/s2_meth.c
@@ -57,7 +57,8 @@
  */
 
 #include "ssl_locl.h"
-#ifndef OPENSSL_NO_SSL2
+#ifndef OPENSSL_NO_SSL2_METHOD
+# ifndef OPENSSL_NO_SSL2
 # include <stdio.h>
 # include <openssl/objects.h>
 
@@ -72,7 +73,16 @@ static const SSL_METHOD *ssl2_get_method(int ver)
 
 IMPLEMENT_ssl2_meth_func(SSLv2_method,
                          ssl2_accept, ssl2_connect, ssl2_get_method)
-#else                           /* !OPENSSL_NO_SSL2 */
+
+# else /* !OPENSSL_NO_SSL2 */
+
+const SSL_METHOD *SSLv2_method(void) { return NULL; }
+const SSL_METHOD *SSLv2_client_method(void) { return NULL; }
+const SSL_METHOD *SSLv2_server_method(void) { return NULL; }
+
+# endif
+
+#else /* !OPENSSL_NO_SSL2_METHOD */
 
 # if PEDANTIC
 static void *dummy = &dummy;
diff --git a/ssl/s3_clnt.c b/ssl/s3_clnt.c
index cfa5080e6b77..9e5875f1f9ba 100644
--- a/ssl/s3_clnt.c
+++ b/ssl/s3_clnt.c
@@ -2104,6 +2104,7 @@ int ssl3_get_certificate_request(SSL *s)
             SSLerr(SSL_F_SSL3_GET_CERTIFICATE_REQUEST, ERR_R_MALLOC_FAILURE);
             goto err;
         }
+        xn = NULL;
 
         p += l;
         nc += l + 2;
@@ -2127,6 +2128,7 @@ int ssl3_get_certificate_request(SSL *s)
  err:
     s->state = SSL_ST_ERR;
  done:
+    X509_NAME_free(xn);
     if (ca_sk != NULL)
         sk_X509_NAME_pop_free(ca_sk, X509_NAME_free);
     return (ret);
diff --git a/ssl/s3_lib.c b/ssl/s3_lib.c
index a48f2b652a15..35d6587da951 100644
--- a/ssl/s3_lib.c
+++ b/ssl/s3_lib.c
@@ -213,7 +213,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC4,
      SSL_MD5,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      128,
@@ -263,7 +263,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC2,
      SSL_MD5,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      128,
@@ -299,7 +299,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      56,
@@ -317,7 +317,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_NOT_EXP | SSL_LOW,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_LOW,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      56,
@@ -352,7 +352,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      56,
@@ -370,7 +370,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_NOT_EXP | SSL_LOW,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_LOW,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      56,
@@ -404,7 +404,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      56,
@@ -422,7 +422,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_NOT_EXP | SSL_LOW,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_LOW,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      56,
@@ -457,7 +457,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      56,
@@ -475,7 +475,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_NOT_EXP | SSL_LOW,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_LOW,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      56,
@@ -509,7 +509,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      56,
@@ -527,7 +527,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_NOT_EXP | SSL_LOW,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_LOW,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      56,
@@ -561,7 +561,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC4,
      SSL_MD5,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      128,
@@ -578,7 +578,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC4,
      SSL_MD5,
      SSL_SSLV3,
-     SSL_NOT_EXP | SSL_MEDIUM,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_MEDIUM,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      128,
      128,
@@ -595,7 +595,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      128,
@@ -613,7 +613,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_NOT_EXP | SSL_LOW,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_LOW,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      56,
@@ -630,7 +630,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_3DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      112,
      168,
@@ -700,7 +700,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_NOT_EXP | SSL_LOW,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_LOW,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      56,
@@ -766,7 +766,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_MD5,
      SSL_SSLV3,
-     SSL_NOT_EXP | SSL_LOW,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_LOW,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      56,
@@ -832,7 +832,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      56,
@@ -850,7 +850,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC2,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      128,
@@ -868,7 +868,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC4,
      SSL_SHA1,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      128,
@@ -886,7 +886,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_MD5,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      56,
@@ -904,7 +904,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC2,
      SSL_MD5,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      128,
@@ -922,7 +922,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC4,
      SSL_MD5,
      SSL_SSLV3,
-     SSL_EXPORT | SSL_EXP40,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP40,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      40,
      128,
@@ -1016,7 +1016,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_AES128,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      128,
      128,
@@ -1111,7 +1111,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_AES256,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      256,
      256,
@@ -1307,7 +1307,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_CAMELLIA128,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_NOT_EXP | SSL_HIGH,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      128,
      128,
@@ -1327,7 +1327,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC4,
      SSL_MD5,
      SSL_TLSV1,
-     SSL_EXPORT | SSL_EXP56,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP56,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      128,
@@ -1343,7 +1343,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC2,
      SSL_MD5,
      SSL_TLSV1,
-     SSL_EXPORT | SSL_EXP56,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP56,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      128,
@@ -1361,7 +1361,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_EXPORT | SSL_EXP56,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP56,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      56,
@@ -1379,7 +1379,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_DES,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_EXPORT | SSL_EXP56,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP56,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      56,
@@ -1397,7 +1397,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC4,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_EXPORT | SSL_EXP56,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP56,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      128,
@@ -1415,7 +1415,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC4,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_EXPORT | SSL_EXP56,
+     SSL_NOT_DEFAULT | SSL_EXPORT | SSL_EXP56,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      56,
      128,
@@ -1530,7 +1530,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_AES128,
      SSL_SHA256,
      SSL_TLSV1_2,
-     SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      128,
      128,
@@ -1546,7 +1546,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_AES256,
      SSL_SHA256,
      SSL_TLSV1_2,
-     SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      256,
      256,
@@ -1699,7 +1699,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_CAMELLIA256,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_NOT_EXP | SSL_HIGH,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      256,
      256,
@@ -1865,7 +1865,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_SEED,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_NOT_EXP | SSL_MEDIUM,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_MEDIUM,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      128,
      128,
@@ -2045,7 +2045,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_AES128GCM,
      SSL_AEAD,
      SSL_TLSV1_2,
-     SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
      SSL_HANDSHAKE_MAC_SHA256 | TLS1_PRF_SHA256,
      128,
      128,
@@ -2061,7 +2061,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_AES256GCM,
      SSL_AEAD,
      SSL_TLSV1_2,
-     SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
      SSL_HANDSHAKE_MAC_SHA384 | TLS1_PRF_SHA384,
      256,
      256,
@@ -2414,7 +2414,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_RC4,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_NOT_EXP | SSL_MEDIUM,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_MEDIUM,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      128,
      128,
@@ -2430,7 +2430,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_3DES,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      112,
      168,
@@ -2446,7 +2446,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_AES128,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      128,
      128,
@@ -2462,7 +2462,7 @@ OPENSSL_GLOBAL SSL_CIPHER ssl3_ciphers[] = {
      SSL_AES256,
      SSL_SHA1,
      SSL_TLSV1,
-     SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
+     SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH | SSL_FIPS,
      SSL_HANDSHAKE_MAC_DEFAULT | TLS1_PRF,
      256,
      256,
diff --git a/ssl/ssl.h b/ssl/ssl.h
index 105047ee4d5e..d6c475c27c08 100644
--- a/ssl/ssl.h
+++ b/ssl/ssl.h
@@ -334,7 +334,7 @@ extern "C" {
  * The following cipher list is used by default. It also is substituted when
  * an application-defined cipher list string starts with 'DEFAULT'.
  */
-# define SSL_DEFAULT_CIPHER_LIST "ALL:!EXPORT:!aNULL:!eNULL:!SSLv2"
+# define SSL_DEFAULT_CIPHER_LIST "ALL:!EXPORT:!LOW:!aNULL:!eNULL:!SSLv2"
 /*
  * As of OpenSSL 1.0.0, ssl_create_cipher_list() in ssl/ssl_ciph.c always
  * starts with a reasonable order, and all we have to do for DEFAULT is
@@ -2017,7 +2017,7 @@ const char *SSL_get_version(const SSL *s);
 /* This sets the 'default' SSL version that SSL_new() will create */
 int SSL_CTX_set_ssl_version(SSL_CTX *ctx, const SSL_METHOD *meth);
 
-# ifndef OPENSSL_NO_SSL2
+# ifndef OPENSSL_NO_SSL2_METHOD
 const SSL_METHOD *SSLv2_method(void); /* SSLv2 */
 const SSL_METHOD *SSLv2_server_method(void); /* SSLv2 */
 const SSL_METHOD *SSLv2_client_method(void); /* SSLv2 */
diff --git a/ssl/ssl_ciph.c b/ssl/ssl_ciph.c
index cb559d987f60..56dd43721e10 100644
--- a/ssl/ssl_ciph.c
+++ b/ssl/ssl_ciph.c
@@ -235,8 +235,7 @@ static const SSL_CIPHER cipher_aliases[] = {
      * "COMPLEMENTOFDEFAULT" (does *not* include ciphersuites not found in
      * ALL!)
      */
-    {0, SSL_TXT_CMPDEF, 0, 0, SSL_aNULL, ~SSL_eNULL, 0, ~SSL_SSLV2,
-     SSL_EXP_MASK, 0, 0, 0},
+    {0, SSL_TXT_CMPDEF, 0, 0, 0, 0, 0, 0, SSL_NOT_DEFAULT, 0, 0, 0},
 
     /*
      * key exchange aliases (some of those using only a single bit here
@@ -1000,10 +999,6 @@ static void ssl_cipher_apply_rule(unsigned long cipher_id,
                     cp->algorithm_enc, cp->algorithm_mac, cp->algorithm_ssl,
                     cp->algo_strength);
 #endif
-            if (algo_strength == SSL_EXP_MASK && SSL_C_IS_EXPORT(cp))
-                goto ok;
-            if (alg_ssl == ~SSL_SSLV2 && cp->algorithm_ssl == SSL_SSLV2)
-                goto ok;
             if (alg_mkey && !(alg_mkey & cp->algorithm_mkey))
                 continue;
             if (alg_auth && !(alg_auth & cp->algorithm_auth))
@@ -1020,10 +1015,11 @@ static void ssl_cipher_apply_rule(unsigned long cipher_id,
             if ((algo_strength & SSL_STRONG_MASK)
                 && !(algo_strength & SSL_STRONG_MASK & cp->algo_strength))
                 continue;
+            if ((algo_strength & SSL_NOT_DEFAULT)
+                && !(cp->algo_strength & SSL_NOT_DEFAULT))
+                continue;
         }
 
-    ok:
-
 #ifdef CIPHER_DEBUG
         fprintf(stderr, "Action = %d\n", rule);
 #endif
@@ -1307,6 +1303,10 @@ static int ssl_cipher_process_rulestr(const char *rule_str,
                         ca_list[j]->algo_strength & SSL_STRONG_MASK;
             }
 
+            if (ca_list[j]->algo_strength & SSL_NOT_DEFAULT) {
+                algo_strength |= SSL_NOT_DEFAULT;
+            }
+
             if (ca_list[j]->valid) {
                 /*
                  * explicit ciphersuite found; its protocol version does not
diff --git a/ssl/ssl_locl.h b/ssl/ssl_locl.h
index f5d9df6bc0e6..d57b902fabbf 100644
--- a/ssl/ssl_locl.h
+++ b/ssl/ssl_locl.h
@@ -435,8 +435,9 @@
 # define SSL_MEDIUM              0x00000040L
 # define SSL_HIGH                0x00000080L
 # define SSL_FIPS                0x00000100L
+# define SSL_NOT_DEFAULT         0x00000200L
 
-/* we have used 000001ff - 23 bits left to go */
+/* we have used 000003ff - 22 bits left to go */
 
 /*-
  * Macros to check the export status and cipher strength for export ciphers.
diff --git a/ssl/t1_lib.c b/ssl/t1_lib.c
index 2e9b65b3fdce..0bdb77d49fc3 100644
--- a/ssl/t1_lib.c
+++ b/ssl/t1_lib.c
@@ -2321,8 +2321,10 @@ static int tls_decrypt_ticket(SSL *s, const unsigned char *etick,
     p = etick + 16 + EVP_CIPHER_CTX_iv_length(&ctx);
     eticklen -= 16 + EVP_CIPHER_CTX_iv_length(&ctx);
     sdec = OPENSSL_malloc(eticklen);
-    if (!sdec || EVP_DecryptUpdate(&ctx, sdec, &slen, p, eticklen) <= 0) {
+    if (sdec == NULL
+            || EVP_DecryptUpdate(&ctx, sdec, &slen, p, eticklen) <= 0) {
         EVP_CIPHER_CTX_cleanup(&ctx);
+        OPENSSL_free(sdec);
         return -1;
     }
     if (EVP_DecryptFinal(&ctx, sdec + slen, &mlen) <= 0) {
@@ -2579,6 +2581,8 @@ int tls1_process_heartbeat(SSL *s)
          * plus 2 bytes payload length, plus payload, plus padding
          */
         buffer = OPENSSL_malloc(1 + 2 + payload + padding);
+        if (buffer == NULL)
+            return -1;
         bp = buffer;
 
         /* Enter response type, length and copy payload */
diff --git a/util/libeay.num b/util/libeay.num
index a83c3bedac3c..e71ca919f1c1 100755
--- a/util/libeay.num
+++ b/util/libeay.num
@@ -1065,8 +1065,8 @@ d2i_ASN1_BMPSTRING                      1092	EXIST::FUNCTION:
 i2d_ASN1_BMPSTRING                      1093	EXIST::FUNCTION:
 BIO_f_ber                               1094	NOEXIST::FUNCTION:
 BN_init                                 1095	EXIST::FUNCTION:
-COMP_CTX_new                            1096	EXIST::FUNCTION:
-COMP_CTX_free                           1097	EXIST::FUNCTION:
+COMP_CTX_new                            1096	EXIST::FUNCTION:COMP
+COMP_CTX_free                           1097	EXIST::FUNCTION:COMP
 COMP_CTX_compress_block                 1098	NOEXIST::FUNCTION:
 COMP_CTX_expand_block                   1099	NOEXIST::FUNCTION:
 X509_STORE_CTX_get_ex_new_index         1100	EXIST::FUNCTION:
@@ -1113,10 +1113,10 @@ PKCS7_digest_from_attributes            1140	EXIST::FUNCTION:
 PKCS7_get_attribute                     1141	EXIST::FUNCTION:
 PKCS7_get_issuer_and_serial             1142	EXIST::FUNCTION:
 PKCS7_get_signed_attribute              1143	EXIST::FUNCTION:
-COMP_compress_block                     1144	EXIST::FUNCTION:
-COMP_expand_block                       1145	EXIST::FUNCTION:
-COMP_rle                                1146	EXIST::FUNCTION:
-COMP_zlib                               1147	EXIST::FUNCTION:
+COMP_compress_block                     1144	EXIST::FUNCTION:COMP
+COMP_expand_block                       1145	EXIST::FUNCTION:COMP
+COMP_rle                                1146	EXIST::FUNCTION:COMP
+COMP_zlib                               1147	EXIST::FUNCTION:COMP
 ms_time_diff                            1148	NOEXIST::FUNCTION:
 ms_time_new                             1149	NOEXIST::FUNCTION:
 ms_time_free                            1150	NOEXIST::FUNCTION:
@@ -1945,7 +1945,7 @@ ENGINE_get_ctrl_function                2521	EXIST::FUNCTION:ENGINE
 ENGINE_set_ctrl_function                2522	EXIST::FUNCTION:ENGINE
 BN_pseudo_rand_range                    2523	EXIST::FUNCTION:
 X509_STORE_CTX_set_verify_cb            2524	EXIST::FUNCTION:
-ERR_load_COMP_strings                   2525	EXIST::FUNCTION:
+ERR_load_COMP_strings                   2525	EXIST::FUNCTION:COMP
 PKCS12_item_decrypt_d2i                 2526	EXIST::FUNCTION:
 ASN1_UTF8STRING_it                      2527	EXIST:!EXPORT_VAR_AS_FUNCTION:VARIABLE:
 ASN1_UTF8STRING_it                      2527	EXIST:EXPORT_VAR_AS_FUNCTION:FUNCTION:
@@ -3545,8 +3545,8 @@ X509at_get0_data_by_OBJ                 3931	EXIST::FUNCTION:
 ASN1_TYPE_set1                          3932	EXIST::FUNCTION:
 ASN1_STRING_set0                        3933	EXIST::FUNCTION:
 i2d_X509_ALGORS                         3934	EXIST::FUNCTION:
-BIO_f_zlib                              3935	EXIST:ZLIB:FUNCTION:
-COMP_zlib_cleanup                       3936	EXIST::FUNCTION:
+BIO_f_zlib                              3935	EXIST:ZLIB:FUNCTION:COMP
+COMP_zlib_cleanup                       3936	EXIST::FUNCTION:COMP
 d2i_X509_ALGORS                         3937	EXIST::FUNCTION:
 CMS_ReceiptRequest_free                 3938	EXIST::FUNCTION:CMS
 PEM_write_CMS                           3939	EXIST:!WIN16:FUNCTION:CMS
diff --git a/util/mk1mf.pl b/util/mk1mf.pl
index e5fe37c426f6..8c7780a1bd7c 100755
--- a/util/mk1mf.pl
+++ b/util/mk1mf.pl
@@ -282,8 +282,9 @@ $cflags.=" -DOPENSSL_FIPS"    if $fips;
 $cflags.=" -DOPENSSL_NO_JPAKE"    if $no_jpake;
 $cflags.=" -DOPENSSL_NO_EC2M"    if $no_ec2m;
 $cflags.=" -DOPENSSL_NO_WEAK_SSL_CIPHERS"   if $no_weak_ssl;
-$cflags.= " -DZLIB" if $zlib_opt;
-$cflags.= " -DZLIB_SHARED" if $zlib_opt == 2;
+$cflags.=" -DZLIB" if $zlib_opt;
+$cflags.=" -DZLIB_SHARED" if $zlib_opt == 2;
+$cflags.=" -DOPENSSL_NO_COMP" if $no_comp;
 
 if ($no_static_engine)
 	{
@@ -780,6 +781,7 @@ sub var_add
 	return("") if $no_gost   && $dir =~ /\/ccgost/;
 	return("") if $no_cms  && $dir =~ /\/cms/;
 	return("") if $no_jpake  && $dir =~ /\/jpake/;
+	return("") if $no_comp && $dir =~ /\/comp/;
 	if ($no_des && $dir =~ /\/des/)
 		{
 		if ($val =~ /read_pwd/)
@@ -1115,6 +1117,7 @@ sub read_options
 		"nw-mwasm" => \$nw_mwasm,
 		"gaswin" => \$gaswin,
 		"no-ssl2" => \$no_ssl2,
+		"no-ssl2-method" => 0,
 		"no-ssl3" => \$no_ssl3,
 		"no-ssl3-method" => 0,
 		"no-tlsext" => \$no_tlsext,
@@ -1156,6 +1159,7 @@ sub read_options
 		"no-unit-test" => 0,
 		"no-zlib" => 0,
 		"no-zlib-dynamic" => 0,
+		"no-comp" => \$no_comp,
 		"fips" => \$fips
 		);
 
@@ -1173,7 +1177,6 @@ sub read_options
 				}
 			}
 		}
-	elsif (/^no-comp$/) { $xcflags = "-DOPENSSL_NO_COMP $xcflags"; }
 	elsif (/^enable-zlib$/) { $zlib_opt = 1 if $zlib_opt == 0 }
 	elsif (/^enable-zlib-dynamic$/)
 		{
diff --git a/util/mkdef.pl b/util/mkdef.pl
index 894f0529fc47..0b97aa4dbe94 100755
--- a/util/mkdef.pl
+++ b/util/mkdef.pl
@@ -107,6 +107,8 @@ my @known_algorithms = ( "RC2", "RC4", "RC5", "IDEA", "DES", "BF",
 			 "CAPIENG",
 			 # SSL v2
 			 "SSL2",
+			 # SSL v2 method
+			 "SSL2_METHOD",
 			 # SSL v3 method
 			 "SSL3_METHOD",
 			 # JPAKE
@@ -143,7 +145,7 @@ my $no_fp_api; my $no_static_engine=1; my $no_gmp; my $no_deprecated;
 my $no_rfc3779; my $no_psk; my $no_tlsext; my $no_cms; my $no_capieng;
 my $no_jpake; my $no_srp; my $no_ssl2; my $no_ec2m; my $no_nistp_gcc; 
 my $no_nextprotoneg; my $no_sctp; my $no_srtp;
-my $no_unit_test; my $no_ssl3_method;
+my $no_unit_test; my $no_ssl3_method; my $no_ssl2_method;
 
 my $fips;
 
@@ -238,6 +240,7 @@ foreach (@ARGV, split(/ /, $options))
 	elsif (/^no-ec_nistp_64_gcc_128$/)	{ $no_nistp_gcc=1; }
 	elsif (/^no-nextprotoneg$/)	{ $no_nextprotoneg=1; }
 	elsif (/^no-ssl2$/)	{ $no_ssl2=1; }
+	elsif (/^no-ssl2-method$/) { $no_ssl2_method=1; }
 	elsif (/^no-ssl3-method$/) { $no_ssl3_method=1; }
 	elsif (/^no-capieng$/)	{ $no_capieng=1; }
 	elsif (/^no-jpake$/)	{ $no_jpake=1; }
@@ -1211,6 +1214,7 @@ sub is_valid
 			if ($keyword eq "EC_NISTP_64_GCC_128" && $no_nistp_gcc)
 					{ return 0; }
 			if ($keyword eq "SSL2" && $no_ssl2) { return 0; }
+			if ($keyword eq "SSL2_METHOD" && $no_ssl2_method) { return 0; }
 			if ($keyword eq "SSL3_METHOD" && $no_ssl3_method) { return 0; }
 			if ($keyword eq "CAPIENG" && $no_capieng) { return 0; }
 			if ($keyword eq "JPAKE" && $no_jpake) { return 0; }
diff --git a/util/ssleay.num b/util/ssleay.num
index dd1c5e88239e..dd5811a905df 100755
--- a/util/ssleay.num
+++ b/util/ssleay.num
@@ -98,9 +98,9 @@ SSLeay_add_ssl_algorithms               109	NOEXIST::FUNCTION:
 SSLv23_client_method                    110	EXIST::FUNCTION:RSA
 SSLv23_method                           111	EXIST::FUNCTION:RSA
 SSLv23_server_method                    112	EXIST::FUNCTION:RSA
-SSLv2_client_method                     113	EXIST::FUNCTION:RSA,SSL2
-SSLv2_method                            114	EXIST::FUNCTION:RSA,SSL2
-SSLv2_server_method                     115	EXIST::FUNCTION:RSA,SSL2
+SSLv2_client_method                     113	EXIST::FUNCTION:RSA,SSL2_METHOD
+SSLv2_method                            114	EXIST::FUNCTION:RSA,SSL2_METHOD
+SSLv2_server_method                     115	EXIST::FUNCTION:RSA,SSL2_METHOD
 SSLv3_client_method                     116	EXIST::FUNCTION:SSL3_METHOD
 SSLv3_method                            117	EXIST::FUNCTION:SSL3_METHOD
 SSLv3_server_method                     118	EXIST::FUNCTION:SSL3_METHOD