summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorBruce Evans <bde@FreeBSD.org>1997-03-13 19:23:27 +0000
committerBruce Evans <bde@FreeBSD.org>1997-03-13 19:23:27 +0000
commit25292acb24bde0a298b72cef64c7ea951e77c9f3 (patch)
tree257a003058e002c314671b5d903a84d2ad2bb9b3
parenta92a5c234ecf2281d29b32b2fb8b6d4b9f9178f1 (diff)
Notes
-rw-r--r--sys/conf/NOTES20
-rw-r--r--sys/i386/conf/LINT20
-rw-r--r--sys/i386/conf/NOTES20
3 files changed, 39 insertions, 21 deletions
diff --git a/sys/conf/NOTES b/sys/conf/NOTES
index 1be05cf94719..361ab7044e97 100644
--- a/sys/conf/NOTES
+++ b/sys/conf/NOTES
@@ -2,7 +2,7 @@
# LINT -- config file for checking all the sources, tries to pull in
# as much of the source tree as it can.
#
-# $Id: LINT,v 1.315 1997/03/12 17:41:33 joerg Exp $
+# $Id: LINT,v 1.316 1997/03/12 19:11:59 se Exp $
#
# NB: You probably don't want to try running a kernel built from this
# file. Instead, you should start from GENERIC, and add options from
@@ -506,12 +506,11 @@ options SLOW_VGA # do byte-wide i/o's to TS and GDC regs
# 0x10 Old-style (XT) keyboard support, useful for older ThinkPads
#
-# This device is mandatory.
-#
-# The Numeric Processing eXtension is used to either enable the
-# coprocessor or enable math emulation. If your machine doesn't contain
-# a math co-processor, you must *also* add the option "MATH_EMULATE".
-# THIS IS NOT AN OPTIONAL ENTRY, DO NOT REMOVE IT
+# The Numeric Processing eXtension driver. This should be configured if
+# your machine has a math co-processor, unless the coprocessor is very
+# buggy. If it is not configured then you *must* configure math emulation
+# (see above). If both npx0 and emulation are configured, then only npx0
+# is used (provided it works).
device npx0 at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13 vector npxintr
#
@@ -1002,6 +1001,11 @@ controller pcic1 at crd?
options POWERFAIL_NMI # make it beep instead of panicing
+#
+# An obsolete option to test kern_opt.c.
+#
+options GATEWAY
+
# More undocumented options for linting.
options CLK_CALIBRATION_LOOP
@@ -1014,6 +1018,7 @@ options "EXT2FS"
options "I586_CTR_GUPROF"
options "I586_PMC_GUPROF=0x70000"
options "IBCS2"
+options LOCKF_DEBUG
options KBD_MAXRETRY=4
options KBD_MAXWAIT=6
options KBD_RESETDELAY=201
@@ -1050,4 +1055,5 @@ options SHMMIN=2
options SHMMNI=33
options SHMSEG=9
options SI_DEBUG
+options SIMPLELOCK_DEBUG
options SPX_HACK
diff --git a/sys/i386/conf/LINT b/sys/i386/conf/LINT
index 1be05cf94719..361ab7044e97 100644
--- a/sys/i386/conf/LINT
+++ b/sys/i386/conf/LINT
@@ -2,7 +2,7 @@
# LINT -- config file for checking all the sources, tries to pull in
# as much of the source tree as it can.
#
-# $Id: LINT,v 1.315 1997/03/12 17:41:33 joerg Exp $
+# $Id: LINT,v 1.316 1997/03/12 19:11:59 se Exp $
#
# NB: You probably don't want to try running a kernel built from this
# file. Instead, you should start from GENERIC, and add options from
@@ -506,12 +506,11 @@ options SLOW_VGA # do byte-wide i/o's to TS and GDC regs
# 0x10 Old-style (XT) keyboard support, useful for older ThinkPads
#
-# This device is mandatory.
-#
-# The Numeric Processing eXtension is used to either enable the
-# coprocessor or enable math emulation. If your machine doesn't contain
-# a math co-processor, you must *also* add the option "MATH_EMULATE".
-# THIS IS NOT AN OPTIONAL ENTRY, DO NOT REMOVE IT
+# The Numeric Processing eXtension driver. This should be configured if
+# your machine has a math co-processor, unless the coprocessor is very
+# buggy. If it is not configured then you *must* configure math emulation
+# (see above). If both npx0 and emulation are configured, then only npx0
+# is used (provided it works).
device npx0 at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13 vector npxintr
#
@@ -1002,6 +1001,11 @@ controller pcic1 at crd?
options POWERFAIL_NMI # make it beep instead of panicing
+#
+# An obsolete option to test kern_opt.c.
+#
+options GATEWAY
+
# More undocumented options for linting.
options CLK_CALIBRATION_LOOP
@@ -1014,6 +1018,7 @@ options "EXT2FS"
options "I586_CTR_GUPROF"
options "I586_PMC_GUPROF=0x70000"
options "IBCS2"
+options LOCKF_DEBUG
options KBD_MAXRETRY=4
options KBD_MAXWAIT=6
options KBD_RESETDELAY=201
@@ -1050,4 +1055,5 @@ options SHMMIN=2
options SHMMNI=33
options SHMSEG=9
options SI_DEBUG
+options SIMPLELOCK_DEBUG
options SPX_HACK
diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES
index 1be05cf94719..361ab7044e97 100644
--- a/sys/i386/conf/NOTES
+++ b/sys/i386/conf/NOTES
@@ -2,7 +2,7 @@
# LINT -- config file for checking all the sources, tries to pull in
# as much of the source tree as it can.
#
-# $Id: LINT,v 1.315 1997/03/12 17:41:33 joerg Exp $
+# $Id: LINT,v 1.316 1997/03/12 19:11:59 se Exp $
#
# NB: You probably don't want to try running a kernel built from this
# file. Instead, you should start from GENERIC, and add options from
@@ -506,12 +506,11 @@ options SLOW_VGA # do byte-wide i/o's to TS and GDC regs
# 0x10 Old-style (XT) keyboard support, useful for older ThinkPads
#
-# This device is mandatory.
-#
-# The Numeric Processing eXtension is used to either enable the
-# coprocessor or enable math emulation. If your machine doesn't contain
-# a math co-processor, you must *also* add the option "MATH_EMULATE".
-# THIS IS NOT AN OPTIONAL ENTRY, DO NOT REMOVE IT
+# The Numeric Processing eXtension driver. This should be configured if
+# your machine has a math co-processor, unless the coprocessor is very
+# buggy. If it is not configured then you *must* configure math emulation
+# (see above). If both npx0 and emulation are configured, then only npx0
+# is used (provided it works).
device npx0 at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13 vector npxintr
#
@@ -1002,6 +1001,11 @@ controller pcic1 at crd?
options POWERFAIL_NMI # make it beep instead of panicing
+#
+# An obsolete option to test kern_opt.c.
+#
+options GATEWAY
+
# More undocumented options for linting.
options CLK_CALIBRATION_LOOP
@@ -1014,6 +1018,7 @@ options "EXT2FS"
options "I586_CTR_GUPROF"
options "I586_PMC_GUPROF=0x70000"
options "IBCS2"
+options LOCKF_DEBUG
options KBD_MAXRETRY=4
options KBD_MAXWAIT=6
options KBD_RESETDELAY=201
@@ -1050,4 +1055,5 @@ options SHMMIN=2
options SHMMNI=33
options SHMSEG=9
options SI_DEBUG
+options SIMPLELOCK_DEBUG
options SPX_HACK