vendor/device-tree/4.20

40 files changed, 953 insertions, 382 deletions

diff --git a/Bindings/arm/al,alpine.txt b/Bindings/arm/al,alpine.txt
index f404a4f9b165..d00debe2e86f 100644
--- a/Bindings/arm/al,alpine.txt
+++ b/Bindings/arm/al,alpine.txt
@@ -14,75 +14,3 @@ compatible: must contain "al,alpine"
 
 	...
 }
-
-* CPU node:
-
-The Alpine platform includes cortex-a15 cores.
-enable-method: must be "al,alpine-smp" to allow smp  [1]
-
-Example:
-
-cpus {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	enable-method = "al,alpine-smp";
-
-	cpu@0 {
-		compatible = "arm,cortex-a15";
-		device_type = "cpu";
-		reg = <0>;
-	};
-
-	cpu@1 {
-		compatible = "arm,cortex-a15";
-		device_type = "cpu";
-		reg = <1>;
-	};
-
-	cpu@2 {
-		compatible = "arm,cortex-a15";
-		device_type = "cpu";
-		reg = <2>;
-	};
-
-	cpu@3 {
-		compatible = "arm,cortex-a15";
-		device_type = "cpu";
-		reg = <3>;
-	};
-};
-
-
-* Alpine CPU resume registers
-
-The CPU resume register are used to define required resume address after
-reset.
-
-Properties:
-- compatible : Should contain "al,alpine-cpu-resume".
-- reg : Offset and length of the register set for the device
-
-Example:
-
-cpu_resume {
-	compatible = "al,alpine-cpu-resume";
-	reg = <0xfbff5ed0 0x30>;
-};
-
-* Alpine System-Fabric Service Registers
-
-The System-Fabric Service Registers allow various operation on CPU and
-system fabric, like powering CPUs off.
-
-Properties:
-- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
-- reg : Offset and length of the register set for the device
-
-Example:
-
-nb_service {
-        compatible = "al,alpine-sysfabric-service", "syscon";
-        reg = <0xfb070000 0x10000>;
-};
-
-[1] arm/cpu-enable-method/al,alpine-smp
diff --git a/Bindings/arm/amlogic.txt b/Bindings/arm/amlogic.txt
index b5c2b5c35766..4498292b833d 100644
--- a/Bindings/arm/amlogic.txt
+++ b/Bindings/arm/amlogic.txt
@@ -57,12 +57,17 @@ Boards with the Amlogic Meson AXG A113D SoC shall have the following properties:
   Required root node property:
     compatible: "amlogic,a113d", "amlogic,meson-axg";
 
+Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties:
+  Required root node property:
+    compatible: "amlogic,g12a";
+
 Board compatible values (alphabetically, grouped by SoC):
 
   - "geniatech,atv1200" (Meson6)
 
   - "minix,neo-x8" (Meson8)
 
+  - "endless,ec100" (Meson8b)
   - "hardkernel,odroid-c1" (Meson8b)
   - "tronfy,mxq" (Meson8b)
 
@@ -101,6 +106,8 @@ Board compatible values (alphabetically, grouped by SoC):
 
   - "amlogic,s400" (Meson axg a113d)
 
+  - "amlogic,u200" (Meson g12a s905d2)
+
 Amlogic Meson Firmware registers Interface
 ------------------------------------------
 
diff --git a/Bindings/arm/atmel-at91.txt b/Bindings/arm/atmel-at91.txt
index 31220b54d85d..4bf1b4da7659 100644
--- a/Bindings/arm/atmel-at91.txt
+++ b/Bindings/arm/atmel-at91.txt
@@ -70,173 +70,3 @@ compatible: must be one of:
        - "atmel,samv71q19"
        - "atmel,samv71q20"
        - "atmel,samv71q21"
-
-Chipid required properties:
-- compatible: Should be "atmel,sama5d2-chipid"
-- reg : Should contain registers location and length
-
-PIT Timer required properties:
-- compatible: Should be "atmel,at91sam9260-pit"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt for the PIT which is the IRQ line
-  shared across all System Controller members.
-
-System Timer (ST) required properties:
-- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt for the ST which is the IRQ line
-  shared across all System Controller members.
-- clocks: phandle to input clock.
-Its subnodes can be:
-- watchdog: compatible should be "atmel,at91rm9200-wdt"
-
-RSTC Reset Controller required properties:
-- compatible: Should be "atmel,<chip>-rstc".
-  <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-Example:
-
-	rstc@fffffd00 {
-		compatible = "atmel,at91sam9260-rstc";
-		reg = <0xfffffd00 0x10>;
-		clocks = <&clk32k>;
-	};
-
-RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
-			"atmel,at91sam9260-sdramc",
-			"atmel,at91sam9g45-ddramc",
-			"atmel,sama5d3-ddramc",
-- reg: Should contain registers location and length
-
-Examples:
-
-	ramc0: ramc@ffffe800 {
-		compatible = "atmel,at91sam9g45-ddramc";
-		reg = <0xffffe800 0x200>;
-	};
-
-SHDWC Shutdown Controller
-
-required properties:
-- compatible: Should be "atmel,<chip>-shdwc".
-  <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-optional properties:
-- atmel,wakeup-mode: String, operation mode of the wakeup mode.
-  Supported values are: "none", "high", "low", "any".
-- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
-
-optional at91sam9260 properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9rl properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9x5 properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-
-Example:
-
-	shdwc@fffffd10 {
-		compatible = "atmel,at91sam9260-shdwc";
-		reg = <0xfffffd10 0x10>;
-		clocks = <&clk32k>;
-	};
-
-SHDWC SAMA5D2-Compatible Shutdown Controller
-
-1) shdwc node
-
-required properties:
-- compatible: should be "atmel,sama5d2-shdwc".
-- reg: should contain registers location and length
-- clocks: phandle to input clock.
-- #address-cells: should be one. The cell is the wake-up input index.
-- #size-cells: should be zero.
-
-optional properties:
-
-- debounce-delay-us: minimum wake-up inputs debouncer period in
-  microseconds. It's usually a board-related property.
-- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
-
-The node contains child nodes for each wake-up input that the platform uses.
-
-2) input nodes
-
-Wake-up input nodes are usually described in the "board" part of the Device
-Tree. Note also that input 0 is linked to the wake-up pin and is frequently
-used.
-
-Required properties:
-- reg: should contain the wake-up input index [0 - 15].
-
-Optional properties:
-- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
-  by the child, forces the wake-up of the core power supply on a high level.
-  The default is to be active low.
-
-Example:
-
-On the SoC side:
-	shdwc@f8048010 {
-		compatible = "atmel,sama5d2-shdwc";
-		reg = <0xf8048010 0x10>;
-		clocks = <&clk32k>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		atmel,wakeup-rtc-timer;
-	};
-
-On the board side:
-	shdwc@f8048010 {
-		debounce-delay-us = <976>;
-
-		input@0 {
-			reg = <0>;
-		};
-
-		input@1 {
-			reg = <1>;
-			atmel,wakeup-active-high;
-		};
-	};
-
-Special Function Registers (SFR)
-
-Special Function Registers (SFR) manage specific aspects of the integrated
-memory, bridge implementations, processor and other functionality not controlled
-elsewhere.
-
-required properties:
-- compatible: Should be "atmel,<chip>-sfr", "syscon" or
-	"atmel,<chip>-sfrbu", "syscon"
-  <chip> can be "sama5d3", "sama5d4" or "sama5d2".
-- reg: Should contain registers location and length
-
-	sfr@f0038000 {
-		compatible = "atmel,sama5d3-sfr", "syscon";
-		reg = <0xf0038000 0x60>;
-	};
-
-Security Module (SECUMOD)
-
-The Security Module macrocell provides all necessary secure functions to avoid
-voltage, temperature, frequency and mechanical attacks on the chip. It also
-embeds secure memories that can be scrambled
-
-required properties:
-- compatible: Should be "atmel,<chip>-secumod", "syscon".
-  <chip> can be "sama5d2".
-- reg: Should contain registers location and length
-
-	secumod@fc040000 {
-		compatible = "atmel,sama5d2-secumod", "syscon";
-		reg = <0xfc040000 0x100>;
-	};
diff --git a/Bindings/arm/atmel-sysregs.txt b/Bindings/arm/atmel-sysregs.txt
new file mode 100644
index 000000000000..4b96608ad692
--- /dev/null
+++ b/Bindings/arm/atmel-sysregs.txt
@@ -0,0 +1,171 @@
+Atmel system registers
+
+Chipid required properties:
+- compatible: Should be "atmel,sama5d2-chipid"
+- reg : Should contain registers location and length
+
+PIT Timer required properties:
+- compatible: Should be "atmel,at91sam9260-pit"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the PIT which is the IRQ line
+  shared across all System Controller members.
+
+System Timer (ST) required properties:
+- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the ST which is the IRQ line
+  shared across all System Controller members.
+- clocks: phandle to input clock.
+Its subnodes can be:
+- watchdog: compatible should be "atmel,at91rm9200-wdt"
+
+RSTC Reset Controller required properties:
+- compatible: Should be "atmel,<chip>-rstc".
+  <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
+- reg: Should contain registers location and length
+- clocks: phandle to input clock.
+
+Example:
+
+	rstc@fffffd00 {
+		compatible = "atmel,at91sam9260-rstc";
+		reg = <0xfffffd00 0x10>;
+		clocks = <&clk32k>;
+	};
+
+RAMC SDRAM/DDR Controller required properties:
+- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
+			"atmel,at91sam9260-sdramc",
+			"atmel,at91sam9g45-ddramc",
+			"atmel,sama5d3-ddramc",
+- reg: Should contain registers location and length
+
+Examples:
+
+	ramc0: ramc@ffffe800 {
+		compatible = "atmel,at91sam9g45-ddramc";
+		reg = <0xffffe800 0x200>;
+	};
+
+SHDWC Shutdown Controller
+
+required properties:
+- compatible: Should be "atmel,<chip>-shdwc".
+  <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
+- reg: Should contain registers location and length
+- clocks: phandle to input clock.
+
+optional properties:
+- atmel,wakeup-mode: String, operation mode of the wakeup mode.
+  Supported values are: "none", "high", "low", "any".
+- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
+
+optional at91sam9260 properties:
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+optional at91sam9rl properties:
+- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
+- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
+
+optional at91sam9x5 properties:
+- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
+
+Example:
+
+	shdwc@fffffd10 {
+		compatible = "atmel,at91sam9260-shdwc";
+		reg = <0xfffffd10 0x10>;
+		clocks = <&clk32k>;
+	};
+
+SHDWC SAMA5D2-Compatible Shutdown Controller
+
+1) shdwc node
+
+required properties:
+- compatible: should be "atmel,sama5d2-shdwc".
+- reg: should contain registers location and length
+- clocks: phandle to input clock.
+- #address-cells: should be one. The cell is the wake-up input index.
+- #size-cells: should be zero.
+
+optional properties:
+
+- debounce-delay-us: minimum wake-up inputs debouncer period in
+  microseconds. It's usually a board-related property.
+- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
+
+The node contains child nodes for each wake-up input that the platform uses.
+
+2) input nodes
+
+Wake-up input nodes are usually described in the "board" part of the Device
+Tree. Note also that input 0 is linked to the wake-up pin and is frequently
+used.
+
+Required properties:
+- reg: should contain the wake-up input index [0 - 15].
+
+Optional properties:
+- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
+  by the child, forces the wake-up of the core power supply on a high level.
+  The default is to be active low.
+
+Example:
+
+On the SoC side:
+	shdwc@f8048010 {
+		compatible = "atmel,sama5d2-shdwc";
+		reg = <0xf8048010 0x10>;
+		clocks = <&clk32k>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		atmel,wakeup-rtc-timer;
+	};
+
+On the board side:
+	shdwc@f8048010 {
+		debounce-delay-us = <976>;
+
+		input@0 {
+			reg = <0>;
+		};
+
+		input@1 {
+			reg = <1>;
+			atmel,wakeup-active-high;
+		};
+	};
+
+Special Function Registers (SFR)
+
+Special Function Registers (SFR) manage specific aspects of the integrated
+memory, bridge implementations, processor and other functionality not controlled
+elsewhere.
+
+required properties:
+- compatible: Should be "atmel,<chip>-sfr", "syscon" or
+	"atmel,<chip>-sfrbu", "syscon"
+  <chip> can be "sama5d3", "sama5d4" or "sama5d2".
+- reg: Should contain registers location and length
+
+	sfr@f0038000 {
+		compatible = "atmel,sama5d3-sfr", "syscon";
+		reg = <0xf0038000 0x60>;
+	};
+
+Security Module (SECUMOD)
+
+The Security Module macrocell provides all necessary secure functions to avoid
+voltage, temperature, frequency and mechanical attacks on the chip. It also
+embeds secure memories that can be scrambled
+
+required properties:
+- compatible: Should be "atmel,<chip>-secumod", "syscon".
+  <chip> can be "sama5d2".
+- reg: Should contain registers location and length
+
+	secumod@fc040000 {
+		compatible = "atmel,sama5d2-secumod", "syscon";
+		reg = <0xfc040000 0x100>;
+	};
diff --git a/Bindings/arm/bcm/brcm,bcm2835.txt b/Bindings/arm/bcm/brcm,bcm2835.txt
index 1e3e29a545e2..0dcc3ea5adff 100644
--- a/Bindings/arm/bcm/brcm,bcm2835.txt
+++ b/Bindings/arm/bcm/brcm,bcm2835.txt
@@ -42,6 +42,14 @@ Raspberry Pi Compute Module
 Required root node properties:
 compatible = "raspberrypi,compute-module", "brcm,bcm2835";
 
+Raspberry Pi Compute Module 3
+Required root node properties:
+compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+
+Raspberry Pi Compute Module 3 Lite
+Required root node properties:
+compatible = "raspberrypi,3-compute-module-lite", "brcm,bcm2837";
+
 Raspberry Pi Zero
 Required root node properties:
 compatible = "raspberrypi,model-zero", "brcm,bcm2835";
diff --git a/Bindings/arm/coresight.txt b/Bindings/arm/coresight.txt
index 5d1ad09bafb4..f8aff65ab921 100644
--- a/Bindings/arm/coresight.txt
+++ b/Bindings/arm/coresight.txt
@@ -54,9 +54,7 @@ its hardware characteristcs.
 	  clocks the core of that coresight component. The latter clock
 	  is optional.
 
-	* port or ports: The representation of the component's port
-	  layout using the generic DT graph presentation found in
-	  "bindings/graph.txt".
+	* port or ports: see "Graph bindings for Coresight" below.
 
 * Additional required properties for System Trace Macrocells (STM):
 	* reg: along with the physical base address and length of the register
@@ -73,7 +71,7 @@ its hardware characteristcs.
 	  AMBA markee):
 		- "arm,coresight-replicator"
 
-	* port or ports: same as above.
+	* port or ports: see "Graph bindings for Coresight" below.
 
 * Optional properties for ETM/PTMs:
 
@@ -96,6 +94,20 @@ its hardware characteristcs.
 	* interrupts : Exactly one SPI may be listed for reporting the address
 	  error
 
+Graph bindings for Coresight
+-------------------------------
+
+Coresight components are interconnected to create a data path for the flow of
+trace data generated from the "sources" to their collection points "sink".
+Each coresight component must describe the "input" and "output" connections.
+The connections must be described via generic DT graph bindings as described
+by the "bindings/graph.txt", where each "port" along with an "endpoint"
+component represents a hardware port and the connection.
+
+ * All output ports must be listed inside a child node named "out-ports"
+ * All input ports must be listed inside a child node named "in-ports".
+ * Port address must match the hardware port number.
+
 Example:
 
 1. Sinks
@@ -105,10 +117,11 @@ Example:
 
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		port {
-			etb_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port0>;
+		in-ports {
+			port {
+				etb_in_port: endpoint@0 {
+					remote-endpoint = <&replicator_out_port0>;
+				};
 			};
 		};
 	};
@@ -119,10 +132,11 @@ Example:
 
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		port {
-			tpiu_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
+		in-ports {
+			port {
+				tpiu_in_port: endpoint@0 {
+					remote-endpoint = <&replicator_out_port1>;
+				};
 			};
 		};
 	};
@@ -133,22 +147,16 @@ Example:
 
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* input port */
-			port@0 {
-				reg =  <0>;
+		in-ports {
+			port {
 				etr_in_port: endpoint {
-					slave-mode;
 					remote-endpoint = <&replicator2_out_port0>;
 				};
 			};
+		};
 
-			/* CATU link represented by output port */
-			port@1 {
-				reg = <1>;
+		out-ports {
+			port {
 				etr_out_port: endpoint {
 					remote-endpoint = <&catu_in_port>;
 				};
@@ -163,7 +171,7 @@ Example:
 		 */
 		compatible = "arm,coresight-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -181,12 +189,11 @@ Example:
 					remote-endpoint = <&tpiu_in_port>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel_out_port0>;
 				};
 			};
@@ -199,40 +206,36 @@ Example:
 
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel_out_port0: endpoint {
 					remote-endpoint =
 							<&replicator_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm0_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm1_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&etm0_out_port>;
 				};
 			};
@@ -248,9 +251,11 @@ Example:
 		cpu = <&cpu0>;
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		port {
-			ptm0_out_port: endpoint {
-				remote-endpoint = <&funnel_in_port0>;
+		out-ports {
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port0>;
+				};
 			};
 		};
 	};
@@ -262,9 +267,11 @@ Example:
 		cpu = <&cpu1>;
 		clocks = <&oscclk6a>;
 		clock-names = "apb_pclk";
-		port {
-			ptm1_out_port: endpoint {
-				remote-endpoint = <&funnel_in_port1>;
+		out-ports {
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port1>;
+				};
 			};
 		};
 	};
@@ -278,9 +285,11 @@ Example:
 
 		clocks = <&soc_smc50mhz>;
 		clock-names = "apb_pclk";
-		port {
-			stm_out_port: endpoint {
-				remote-endpoint = <&main_funnel_in_port2>;
+		out-ports {
+			port {
+				stm_out_port: endpoint {
+					remote-endpoint = <&main_funnel_in_port2>;
+				};
 			};
 		};
 	};
@@ -295,10 +304,11 @@ Example:
 		clock-names = "apb_pclk";
 
 		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-		port {
-			catu_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&etr_out_port>;
+		in-ports {
+			port {
+				catu_in_port: endpoint {
+					remote-endpoint = <&etr_out_port>;
+				};
 			};
 		};
 	};
diff --git a/Bindings/arm/cpu-capacity.txt b/Bindings/arm/cpu-capacity.txt
index 9b5685a1d15d..84262cdb8d29 100644
--- a/Bindings/arm/cpu-capacity.txt
+++ b/Bindings/arm/cpu-capacity.txt
@@ -59,9 +59,11 @@ mhz values (normalized w.r.t. the highest value found while parsing the DT).
 ===========================================
 
 Example 1 (ARM 64-bit, 6-cpu system, two clusters):
-capacities-dmips-mhz are scaled w.r.t. 1024 (cpu@0 and cpu@1)
-supposing cluster0@max-freq=1100 and custer1@max-freq=850,
-final capacities are 1024 for cluster0 and 446 for cluster1
+The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024)
+are 1024 and 578 for cluster0 and cluster1. Further normalization
+is done by the operating system based on cluster0@max-freq=1100 and
+custer1@max-freq=850, final capacities are 1024 for cluster0 and
+446 for cluster1 (576*850/1100).
 
 cpus {
 	#address-cells = <2>;
diff --git a/Bindings/arm/cpu-enable-method/al,alpine-smp b/Bindings/arm/cpu-enable-method/al,alpine-smp
index c2e0cc5e4cfd..35e5afb6d9ad 100644
--- a/Bindings/arm/cpu-enable-method/al,alpine-smp
+++ b/Bindings/arm/cpu-enable-method/al,alpine-smp
@@ -14,7 +14,28 @@ Related properties:	(none)
 
 Note:
 This enable method requires valid nodes compatible with
-"al,alpine-cpu-resume" and "al,alpine-nb-service"[1].
+"al,alpine-cpu-resume" and "al,alpine-nb-service".
+
+
+* Alpine CPU resume registers
+
+The CPU resume register are used to define required resume address after
+reset.
+
+Properties:
+- compatible : Should contain "al,alpine-cpu-resume".
+- reg : Offset and length of the register set for the device
+
+
+* Alpine System-Fabric Service Registers
+
+The System-Fabric Service Registers allow various operation on CPU and
+system fabric, like powering CPUs off.
+
+Properties:
+- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
+- reg : Offset and length of the register set for the device
+
 
 Example:
 
@@ -48,5 +69,12 @@ cpus {
 	};
 };
 
---
-[1] arm/al,alpine.txt
+cpu_resume {
+	compatible = "al,alpine-cpu-resume";
+	reg = <0xfbff5ed0 0x30>;
+};
+
+nb_service {
+        compatible = "al,alpine-sysfabric-service", "syscon";
+        reg = <0xfb070000 0x10000>;
+};
diff --git a/Bindings/arm/cpus.txt b/Bindings/arm/cpus.txt
index 96dfccc0faa8..b0198a1cf403 100644
--- a/Bindings/arm/cpus.txt
+++ b/Bindings/arm/cpus.txt
@@ -276,7 +276,7 @@ described below.
 		Usage: optional
 		Value type: <prop-encoded-array>
 		Definition: A u32 value that represents the running time dynamic
-			    power coefficient in units of mW/MHz/uV^2. The
+			    power coefficient in units of uW/MHz/V^2. The
 			    coefficient can either be calculated from power
 			    measurements or derived by analysis.
 
@@ -287,7 +287,7 @@ described below.
 
 			    Pdyn = dynamic-power-coefficient * V^2 * f
 
-			    where voltage is in uV, frequency is in MHz.
+			    where voltage is in V, frequency is in MHz.
 
 Example 1 (dual-cluster big.LITTLE system 32-bit):
 
diff --git a/Bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Bindings/arm/freescale/fsl,layerscape-dcfg.txt
new file mode 100644
index 000000000000..b5cb374dc47d
--- /dev/null
+++ b/Bindings/arm/freescale/fsl,layerscape-dcfg.txt
@@ -0,0 +1,19 @@
+Freescale DCFG
+
+DCFG is the device configuration unit, that provides general purpose
+configuration and status for the device. Such as setting the secondary
+core start address and release the secondary core from holdoff and startup.
+
+Required properties:
+  - compatible: Should contain a chip-specific compatible string,
+	Chip-specific strings are of the form "fsl,<chip>-dcfg",
+	The following <chip>s are known to be supported:
+	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
+
+  - reg : should contain base address and length of DCFG memory-mapped registers
+
+Example:
+	dcfg: dcfg@1ee0000 {
+		compatible = "fsl,ls1021a-dcfg";
+		reg = <0x0 0x1ee0000 0x0 0x10000>;
+	};
diff --git a/Bindings/arm/freescale/fsl,layerscape-scfg.txt b/Bindings/arm/freescale/fsl,layerscape-scfg.txt
new file mode 100644
index 000000000000..0ab67b0b216d
--- /dev/null
+++ b/Bindings/arm/freescale/fsl,layerscape-scfg.txt
@@ -0,0 +1,19 @@
+Freescale SCFG
+
+SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+
+Required properties:
+  - compatible: Should contain a chip-specific compatible string,
+	Chip-specific strings are of the form "fsl,<chip>-scfg",
+	The following <chip>s are known to be supported:
+	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
+
+  - reg: should contain base address and length of SCFG memory-mapped registers
+
+Example:
+	scfg: scfg@1570000 {
+		compatible = "fsl,ls1021a-scfg";
+		reg = <0x0 0x1570000 0x0 0x10000>;
+	};
diff --git a/Bindings/arm/freescale/fsl,scu.txt b/Bindings/arm/freescale/fsl,scu.txt
new file mode 100644
index 000000000000..46d0af1f0872
--- /dev/null
+++ b/Bindings/arm/freescale/fsl,scu.txt
@@ -0,0 +1,183 @@
+NXP i.MX System Controller Firmware (SCFW)
+--------------------------------------------------------------------
+
+The System Controller Firmware (SCFW) is a low-level system function
+which runs on a dedicated Cortex-M core to provide power, clock, and
+resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+(QM, QP), and i.MX8QX (QXP, DX).
+
+The AP communicates with the SC using a multi-ported MU module found
+in the LSIO subsystem. The current definition of this MU module provides
+5 remote AP connections to the SC to support up to 5 execution environments
+(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
+with the LSIO DSC IP bus. The SC firmware will communicate with this MU
+using the MSI bus.
+
+System Controller Device Node:
+============================================================
+
+The scu node with the following properties shall be under the /firmware/ node.
+
+Required properties:
+-------------------
+- compatible:	should be "fsl,imx-scu".
+- mbox-names:	should include "tx0", "tx1", "tx2", "tx3",
+			       "rx0", "rx1", "rx2", "rx3".
+- mboxes:	List of phandle of 4 MU channels for tx and 4 MU channels
+		for rx. All 8 MU channels must be in the same MU instance.
+		Cross instances are not allowed. The MU instance can only
+		be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
+		to make sure use the one which is not conflict with other
+		execution environments. e.g. ATF.
+		Note:
+		Channel 0 must be "tx0" or "rx0".
+		Channel 1 must be "tx1" or "rx1".
+		Channel 2 must be "tx2" or "rx2".
+		Channel 3 must be "tx3" or "rx3".
+		e.g.
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 0 1
+			  &lsio_mu1 0 2
+			  &lsio_mu1 0 3
+			  &lsio_mu1 1 0
+			  &lsio_mu1 1 1
+			  &lsio_mu1 1 2
+			  &lsio_mu1 1 3>;
+		See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+		for detailed mailbox binding.
+
+i.MX SCU Client Device Node:
+============================================================
+
+Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+Power domain bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+This binding for the SCU power domain providers uses the generic power
+domain binding[2].
+
+Required properties:
+- compatible:		Should be "fsl,scu-pd".
+- #address-cells:	Should be 1.
+- #size-cells:		Should be 0.
+
+Required properties for power domain sub nodes:
+- #power-domain-cells:	Must be 0.
+
+Optional Properties:
+- reg:			Resource ID of this power domain.
+			No exist means uncontrollable by user.
+			See detailed Resource ID list from:
+			include/dt-bindings/power/imx-rsrc.h
+- power-domains:	phandle pointing to the parent power domain.
+
+Clock bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+This binding uses the common clock binding[1].
+
+Required properties:
+- compatible:		Should be "fsl,imx8qxp-clock".
+- #clock-cells:		Should be 1. Contains the Clock ID value.
+- clocks:		List of clock specifiers, must contain an entry for
+			each required entry in clock-names
+- clock-names:		Should include entries "xtal_32KHz", "xtal_24MHz"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.
+
+See the full list of clock IDs from:
+include/dt-bindings/clock/imx8qxp-clock.h
+
+Pinctrl bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+This binding uses the i.MX common pinctrl binding[3].
+
+Required properties:
+- compatible:		Should be "fsl,imx8qxp-iomuxc".
+
+Required properties for Pinctrl sub nodes:
+- fsl,pins:		Each entry consists of 3 integers which represents
+			the mux and config setting for one pin. The first 2
+			integers <pin_id mux_mode> are specified using a
+			PIN_FUNC_ID macro, which can be found in
+			<dt-bindings/pinctrl/pads-imx8qxp.h>.
+			The last integer CONFIG is the pad setting value like
+			pull-up on this pin.
+
+			Please refer to i.MX8QXP Reference Manual for detailed
+			CONFIG settings.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/power/power_domain.txt
+[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
+
+Example (imx8qxp):
+-------------
+lsio_mu1: mailbox@5d1c0000 {
+	...
+	#mbox-cells = <2>;
+};
+
+firmware {
+	scu {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0", "tx1", "tx2", "tx3",
+			     "rx0", "rx1", "rx2", "rx3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 0 1
+			  &lsio_mu1 0 2
+			  &lsio_mu1 0 3
+			  &lsio_mu1 1 0
+			  &lsio_mu1 1 1
+			  &lsio_mu1 1 2
+			  &lsio_mu1 1 3>;
+
+		clk: clk {
+			compatible = "fsl,imx8qxp-clk";
+			#clock-cells = <1>;
+		};
+
+		iomuxc {
+			compatible = "fsl,imx8qxp-iomuxc";
+
+			pinctrl_lpuart0: lpuart0grp {
+				fsl,pins = <
+					SC_P_UART0_RX_ADMA_UART0_RX	0x06000020
+					SC_P_UART0_TX_ADMA_UART0_TX	0x06000020
+				>;
+			};
+			...
+		};
+
+		imx8qx-pm {
+			compatible = "fsl,scu-pd";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pd_dma: dma-power-domain {
+				#power-domain-cells = <0>;
+
+				pd_dma_lpuart0: dma-lpuart0@57 {
+					reg = <SC_R_UART_0>;
+					#power-domain-cells = <0>;
+					power-domains = <&pd_dma>;
+				};
+				...
+			};
+			...
+		};
+	};
+};
+
+serial@5a060000 {
+	...
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	clocks = <&clk IMX8QXP_UART0_CLK>,
+		 <&clk IMX8QXP_UART0_IPG_CLK>;
+	clock-names = "per", "ipg";
+	power-domains = <&pd_dma_lpuart0>;
+};
diff --git a/Bindings/arm/fsl.txt b/Bindings/arm/fsl.txt
index 8a1baa2b9723..5074aeecd327 100644
--- a/Bindings/arm/fsl.txt
+++ b/Bindings/arm/fsl.txt
@@ -57,6 +57,50 @@ i.MX6SLL EVK board
 Required root node properties:
     - compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
 
+i.MX6 Quad Plus SABRE Smart Device Board
+Required root node properties:
+    - compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+
+i.MX6 Quad Plus SABRE Automotive Board
+Required root node properties:
+    - compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+
+i.MX6 DualLite SABRE Smart Device Board
+Required root node properties:
+    - compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+
+i.MX6 DualLite/Solo SABRE Automotive Board
+Required root node properties:
+    - compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
+
+i.MX6 SoloLite EVK Board
+Required root node properties:
+    - compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+i.MX6 UltraLite 14x14 EVK Board
+Required root node properties:
+    - compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+
+i.MX6 UltraLiteLite 14x14 EVK Board
+Required root node properties:
+    - compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+
+i.MX6 ULZ 14x14 EVK Board
+Required root node properties:
+    - compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+i.MX6 SoloX SDB Board
+Required root node properties:
+    - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+i.MX6 SoloX Sabre Auto Board
+Required root node properties:
+    - compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
+
+i.MX7 SabreSD Board
+Required root node properties:
+    - compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
 Generic i.MX boards
 -------------------
 
@@ -101,45 +145,6 @@ Freescale LS1021A Platform Device Tree Bindings
 Required root node compatible properties:
   - compatible = "fsl,ls1021a";
 
-Freescale SoC-specific Device Tree Bindings
--------------------------------------------
-
-Freescale SCFG
-  SCFG is the supplemental configuration unit, that provides SoC specific
-configuration and status registers for the chip. Such as getting PEX port
-status.
-  Required properties:
-  - compatible: Should contain a chip-specific compatible string,
-	Chip-specific strings are of the form "fsl,<chip>-scfg",
-	The following <chip>s are known to be supported:
-	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
-  - reg: should contain base address and length of SCFG memory-mapped registers
-
-Example:
-	scfg: scfg@1570000 {
-		compatible = "fsl,ls1021a-scfg";
-		reg = <0x0 0x1570000 0x0 0x10000>;
-	};
-
-Freescale DCFG
-  DCFG is the device configuration unit, that provides general purpose
-configuration and status for the device. Such as setting the secondary
-core start address and release the secondary core from holdoff and startup.
-  Required properties:
-  - compatible: Should contain a chip-specific compatible string,
-	Chip-specific strings are of the form "fsl,<chip>-dcfg",
-	The following <chip>s are known to be supported:
-	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
-  - reg : should contain base address and length of DCFG memory-mapped registers
-
-Example:
-	dcfg: dcfg@1ee0000 {
-		compatible = "fsl,ls1021a-dcfg";
-		reg = <0x0 0x1ee0000 0x0 0x10000>;
-	};
-
 Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
 ----------------------------------------------------------------
 
diff --git a/Bindings/arm/hisilicon/hisilicon.txt b/Bindings/arm/hisilicon/hisilicon.txt
index 199cd36fe1ba..a97f643e7d1c 100644
--- a/Bindings/arm/hisilicon/hisilicon.txt
+++ b/Bindings/arm/hisilicon/hisilicon.txt
@@ -8,6 +8,14 @@ HiKey960 Board
 Required root node properties:
 	- compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
 
+Hi3670 SoC
+Required root node properties:
+	- compatible = "hisilicon,hi3670";
+
+HiKey970 Board
+Required root node properties:
+	- compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
+
 Hi3798cv200 SoC
 Required root node properties:
 	- compatible = "hisilicon,hi3798cv200";
diff --git a/Bindings/arm/keystone/ti,sci.txt b/Bindings/arm/keystone/ti,sci.txt
index 31f5f9a104cc..b56a02c10ae6 100644
--- a/Bindings/arm/keystone/ti,sci.txt
+++ b/Bindings/arm/keystone/ti,sci.txt
@@ -45,11 +45,15 @@ Optional Properties:
 	debug_messages - Map the Debug message region
 - reg:  register space corresponding to the debug_messages
 - ti,system-reboot-controller: If system reboot can be triggered by SoC reboot
+- ti,host-id: Integer value corresponding to the host ID assigned by Firmware
+	for identification of host processing entities such as virtual
+	machines
 
 Example (K2G):
 -------------
 	pmmc: pmmc {
 		compatible = "ti,k2g-sci";
+		ti,host-id = <2>;
 		mbox-names = "rx", "tx";
 		mboxes= <&msgmgr &msgmgr_proxy_pmmc_rx>,
 			<&msgmgr &msgmgr_proxy_pmmc_tx>;
diff --git a/Bindings/arm/mediatek/mediatek,apmixedsys.txt b/Bindings/arm/mediatek/mediatek,apmixedsys.txt
index b404d592ce58..4e4a3c0ab9ab 100644
--- a/Bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ b/Bindings/arm/mediatek/mediatek,apmixedsys.txt
@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt2712-apmixedsys", "syscon"
 	- "mediatek,mt6797-apmixedsys"
 	- "mediatek,mt7622-apmixedsys"
+	- "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
 	- "mediatek,mt8135-apmixedsys"
 	- "mediatek,mt8173-apmixedsys"
 - #clock-cells: Must be 1
diff --git a/Bindings/arm/mediatek/mediatek,audsys.txt b/Bindings/arm/mediatek/mediatek,audsys.txt
index 34a69ba67f13..d1606b2c3e63 100644
--- a/Bindings/arm/mediatek/mediatek,audsys.txt
+++ b/Bindings/arm/mediatek/mediatek,audsys.txt
@@ -8,6 +8,7 @@ Required Properties:
 - compatible: Should be one of:
 	- "mediatek,mt2701-audsys", "syscon"
 	- "mediatek,mt7622-audsys", "syscon"
+	- "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
 - #clock-cells: Must be 1
 
 The AUDSYS controller uses the common clk binding from
diff --git a/Bindings/arm/mediatek/mediatek,bdpsys.txt b/Bindings/arm/mediatek/mediatek,bdpsys.txt
index 4010e37c53a0..149567a38215 100644
--- a/Bindings/arm/mediatek/mediatek,bdpsys.txt
+++ b/Bindings/arm/mediatek/mediatek,bdpsys.txt
@@ -8,6 +8,7 @@ Required Properties:
 - compatible: Should be:
 	- "mediatek,mt2701-bdpsys", "syscon"
 	- "mediatek,mt2712-bdpsys", "syscon"
+	- "mediatek,mt7623-bdpsys", "mediatek,mt2701-bdpsys", "syscon"
 - #clock-cells: Must be 1
 
 The bdpsys controller uses the common clk binding from
diff --git a/Bindings/arm/mediatek/mediatek,ethsys.txt b/Bindings/arm/mediatek/mediatek,ethsys.txt
index 8f5335b480ac..f17cfe64255d 100644
--- a/Bindings/arm/mediatek/mediatek,ethsys.txt
+++ b/Bindings/arm/mediatek/mediatek,ethsys.txt
@@ -8,6 +8,7 @@ Required Properties:
 - compatible: Should be:
 	- "mediatek,mt2701-ethsys", "syscon"
 	- "mediatek,mt7622-ethsys", "syscon"
+	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
 - #clock-cells: Must be 1
 - #reset-cells: Must be 1
 
diff --git a/Bindings/arm/mediatek/mediatek,hifsys.txt b/Bindings/arm/mediatek/mediatek,hifsys.txt
index f5629d64cef2..323905af82c3 100644
--- a/Bindings/arm/mediatek/mediatek,hifsys.txt
+++ b/Bindings/arm/mediatek/mediatek,hifsys.txt
@@ -9,6 +9,7 @@ Required Properties:
 - compatible: Should be:
 	- "mediatek,mt2701-hifsys", "syscon"
 	- "mediatek,mt7622-hifsys", "syscon"
+	- "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon"
 - #clock-cells: Must be 1
 
 The hifsys controller uses the common clk binding from
diff --git a/Bindings/arm/mediatek/mediatek,imgsys.txt b/Bindings/arm/mediatek/mediatek,imgsys.txt
index 868bd51a98be..3f99672163e3 100644
--- a/Bindings/arm/mediatek/mediatek,imgsys.txt
+++ b/Bindings/arm/mediatek/mediatek,imgsys.txt
@@ -9,6 +9,7 @@ Required Properties:
 	- "mediatek,mt2701-imgsys", "syscon"
 	- "mediatek,mt2712-imgsys", "syscon"
 	- "mediatek,mt6797-imgsys", "syscon"
+	- "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon"
 	- "mediatek,mt8173-imgsys", "syscon"
 - #clock-cells: Must be 1
 
diff --git a/Bindings/arm/mediatek/mediatek,infracfg.txt b/Bindings/arm/mediatek/mediatek,infracfg.txt
index 566f153f9f83..89f4272a1441 100644
--- a/Bindings/arm/mediatek/mediatek,infracfg.txt
+++ b/Bindings/arm/mediatek/mediatek,infracfg.txt
@@ -11,6 +11,7 @@ Required Properties:
 	- "mediatek,mt2712-infracfg", "syscon"
 	- "mediatek,mt6797-infracfg", "syscon"
 	- "mediatek,mt7622-infracfg", "syscon"
+	- "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
 	- "mediatek,mt8135-infracfg", "syscon"
 	- "mediatek,mt8173-infracfg", "syscon"
 - #clock-cells: Must be 1
diff --git a/Bindings/arm/mediatek/mediatek,mmsys.txt b/Bindings/arm/mediatek/mediatek,mmsys.txt
index 4eb8bbe15c01..15d977afad31 100644
--- a/Bindings/arm/mediatek/mediatek,mmsys.txt
+++ b/Bindings/arm/mediatek/mediatek,mmsys.txt
@@ -9,6 +9,7 @@ Required Properties:
 	- "mediatek,mt2701-mmsys", "syscon"
 	- "mediatek,mt2712-mmsys", "syscon"
 	- "mediatek,mt6797-mmsys", "syscon"
+	- "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon"
 	- "mediatek,mt8173-mmsys", "syscon"
 - #clock-cells: Must be 1
 
diff --git a/Bindings/arm/mediatek/mediatek,pericfg.txt b/Bindings/arm/mediatek/mediatek,pericfg.txt
index fb58ca8c2770..6755514deb80 100644
--- a/Bindings/arm/mediatek/mediatek,pericfg.txt
+++ b/Bindings/arm/mediatek/mediatek,pericfg.txt
@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt2701-pericfg", "syscon"
 	- "mediatek,mt2712-pericfg", "syscon"
 	- "mediatek,mt7622-pericfg", "syscon"
+	- "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon"
 	- "mediatek,mt8135-pericfg", "syscon"
 	- "mediatek,mt8173-pericfg", "syscon"
 - #clock-cells: Must be 1
diff --git a/Bindings/arm/mediatek/mediatek,topckgen.txt b/Bindings/arm/mediatek/mediatek,topckgen.txt
index 24014a7e2332..d849465b8c99 100644
--- a/Bindings/arm/mediatek/mediatek,topckgen.txt
+++ b/Bindings/arm/mediatek/mediatek,topckgen.txt
@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt2712-topckgen", "syscon"
 	- "mediatek,mt6797-topckgen"
 	- "mediatek,mt7622-topckgen"
+	- "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
 	- "mediatek,mt8135-topckgen"
 	- "mediatek,mt8173-topckgen"
 - #clock-cells: Must be 1
diff --git a/Bindings/arm/mediatek/mediatek,vdecsys.txt b/Bindings/arm/mediatek/mediatek,vdecsys.txt
index ea40d05089f8..3212afc753c8 100644
--- a/Bindings/arm/mediatek/mediatek,vdecsys.txt
+++ b/Bindings/arm/mediatek/mediatek,vdecsys.txt
@@ -9,6 +9,7 @@ Required Properties:
 	- "mediatek,mt2701-vdecsys", "syscon"
 	- "mediatek,mt2712-vdecsys", "syscon"
 	- "mediatek,mt6797-vdecsys", "syscon"
+	- "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon"
 	- "mediatek,mt8173-vdecsys", "syscon"
 - #clock-cells: Must be 1
 
diff --git a/Bindings/arm/msm/qcom,kpss-acc.txt b/Bindings/arm/msm/qcom,kpss-acc.txt
index 1333db9acfee..7f696362a4a1 100644
--- a/Bindings/arm/msm/qcom,kpss-acc.txt
+++ b/Bindings/arm/msm/qcom,kpss-acc.txt
@@ -21,10 +21,29 @@ PROPERTIES
 		    the register region. An optional second element specifies
 		    the base address and size of the alias register region.
 
+- clocks:
+        Usage: required
+        Value type: <prop-encoded-array>
+        Definition: reference to the pll parents.
+
+- clock-names:
+        Usage: required
+        Value type: <stringlist>
+        Definition: must be "pll8_vote", "pxo".
+
+- clock-output-names:
+	Usage: optional
+	Value type: <string>
+	Definition: Name of the output clock. Typically acpuX_aux where X is a
+		    CPU number starting at 0.
+
 Example:
 
 	clock-controller@2088000 {
 		compatible = "qcom,kpss-acc-v2";
 		reg = <0x02088000 0x1000>,
 		      <0x02008000 0x1000>;
+		clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
+		clock-names = "pll8_vote", "pxo";
+		clock-output-names = "acpu0_aux";
 	};
diff --git a/Bindings/arm/msm/qcom,kpss-gcc.txt b/Bindings/arm/msm/qcom,kpss-gcc.txt
new file mode 100644
index 000000000000..e628758950e1
--- /dev/null
+++ b/Bindings/arm/msm/qcom,kpss-gcc.txt
@@ -0,0 +1,44 @@
+Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: should be one of the following. The generic compatible
+			"qcom,kpss-gcc" should also be included.
+			"qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc"
+			"qcom,kpss-gcc-apq8064", "qcom,kpss-gcc"
+			"qcom,kpss-gcc-msm8974", "qcom,kpss-gcc"
+			"qcom,kpss-gcc-msm8960", "qcom,kpss-gcc"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address and size of the register region
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the pll parents.
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "pll8_vote", "pxo".
+
+- clock-output-names:
+	Usage: required
+	Value type: <string>
+	Definition: Name of the output clock. Typically acpu_l2_aux indicating
+		    an L2 cache auxiliary clock.
+
+Example:
+
+	l2cc: clock-controller@2011000 {
+		compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc";
+		reg = <0x2011000 0x1000>;
+		clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
+		clock-names = "pll8_vote", "pxo";
+		clock-output-names = "acpu_l2_aux";
+	};
diff --git a/Bindings/arm/msm/qcom,llcc.txt b/Bindings/arm/msm/qcom,llcc.txt
index 5e85749262ae..eaee06b2d8f2 100644
--- a/Bindings/arm/msm/qcom,llcc.txt
+++ b/Bindings/arm/msm/qcom,llcc.txt
@@ -16,11 +16,26 @@ Properties:
 - reg:
 	Usage: required
 	Value Type: <prop-encoded-array>
-	Definition: Start address and the the size of the register region.
+	Definition: The first element specifies the llcc base start address and
+		    the size of the register region. The second element specifies
+		    the llcc broadcast base address and size of the register region.
+
+- reg-names:
+        Usage: required
+        Value Type: <stringlist>
+        Definition: Register region names. Must be "llcc_base", "llcc_broadcast_base".
+
+- interrupts:
+	Usage: required
+	Definition: The interrupt is associated with the llcc edac device.
+			It's used for llcc cache single and double bit error detection
+			and reporting.
 
 Example:
 
 	cache-controller@1100000 {
 		compatible = "qcom,sdm845-llcc";
-		reg = <0x1100000 0x250000>;
+		reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
+		reg-names = "llcc_base", "llcc_broadcast_base";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 	};
diff --git a/Bindings/arm/rockchip.txt b/Bindings/arm/rockchip.txt
index acfd3c773dd0..0cc71236d639 100644
--- a/Bindings/arm/rockchip.txt
+++ b/Bindings/arm/rockchip.txt
@@ -5,6 +5,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "vamrs,ficus", "rockchip,rk3399";
 
+- 96boards RK3399 Rock960 (ROCK960 Consumer Edition)
+    Required root node properties:
+      - compatible = "vamrs,rock960", "rockchip,rk3399";
+
 - Amarula Vyasa RK3288 board
     Required root node properties:
       - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
@@ -13,6 +17,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "asus,rk3288-tinker", "rockchip,rk3288";
 
+- Asus Tinker board S
+    Required root node properties:
+      - compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+
 - Kylin RK3036 board:
     Required root node properties:
       - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
@@ -59,6 +67,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
 
+- Firefly ROC-RK3399-PC board:
+    Required root node properties:
+      - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
@@ -160,6 +172,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
     - compatible = "pine64,rock64", "rockchip,rk3328";
 
+- Pine64 RockPro64 board:
+    Required root node properties:
+    - compatible = "pine64,rockpro64", "rockchip,rk3399";
+
 - Rockchip PX3 Evaluation board:
     Required root node properties:
       - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
@@ -168,6 +184,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
 
+- Rockchip PX30 Evaluation board:
+    Required root node properties:
+      - compatible = "rockchip,px30-evb", "rockchip,px30";
+
 - Rockchip RV1108 Evaluation board
     Required root node properties:
       - compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
diff --git a/Bindings/arm/scu.txt b/Bindings/arm/scu.txt
index 08a587875996..74d0a780ce51 100644
--- a/Bindings/arm/scu.txt
+++ b/Bindings/arm/scu.txt
@@ -22,7 +22,7 @@ References:
 
 Example:
 
-scu@a04100000 {
+scu@a0410000 {
 	compatible = "arm,cortex-a9-scu";
 	reg = <0xa0410000 0x100>;
 };
diff --git a/Bindings/arm/secure.txt b/Bindings/arm/secure.txt
index e31303fb233a..f27bbff2c780 100644
--- a/Bindings/arm/secure.txt
+++ b/Bindings/arm/secure.txt
@@ -32,7 +32,8 @@ describe the view of Secure world using the standard bindings. These
 secure- bindings only need to be used where both the Secure and Normal
 world views need to be described in a single device tree.
 
-Valid Secure world properties:
+Valid Secure world properties
+-----------------------------
 
 - secure-status : specifies whether the device is present and usable
   in the secure world. The combination of this with "status" allows
@@ -51,3 +52,19 @@ Valid Secure world properties:
    status = "disabled"; secure-status = "okay";     /* S-only */
    status = "disabled";                             /* disabled in both */
    status = "disabled"; secure-status = "disabled"; /* disabled in both */
+
+The secure-chosen node
+----------------------
+
+Similar to the /chosen node which serves as a place for passing data
+between firmware and the operating system, the /secure-chosen node may
+be used to pass data to the Secure OS. Only the properties defined
+below may appear in the /secure-chosen node.
+
+- stdout-path : specifies the device to be used by the Secure OS for
+  its console output. The syntax is the same as for /chosen/stdout-path.
+  If the /secure-chosen node exists but the stdout-path property is not
+  present, the Secure OS should not perform any console output. If
+  /secure-chosen does not exist, the Secure OS should use the value of
+  /chosen/stdout-path instead (that is, use the same device as the
+  Normal world OS).
diff --git a/Bindings/arm/shmobile.txt b/Bindings/arm/shmobile.txt
index 89b4a389fbc7..58c4256d37a3 100644
--- a/Bindings/arm/shmobile.txt
+++ b/Bindings/arm/shmobile.txt
@@ -7,6 +7,8 @@ SoCs:
     compatible = "renesas,emev2"
   - RZ/A1H (R7S72100)
     compatible = "renesas,r7s72100"
+  - RZ/A2 (R7S9210)
+    compatible = "renesas,r7s9210"
   - SH-Mobile AG5 (R8A73A00/SH73A0)
     compatible = "renesas,sh73a0"
   - R-Mobile APE6 (R8A73A40)
@@ -23,6 +25,10 @@ SoCs:
     compatible = "renesas,r8a7745"
   - RZ/G1C (R8A77470)
     compatible = "renesas,r8a77470"
+  - RZ/G2M (R8A774A1)
+    compatible = "renesas,r8a774a1"
+  - RZ/G2E (R8A774C0)
+    compatible = "renesas,r8a774c0"
   - R-Car M1A (R8A77781)
     compatible = "renesas,r8a7778"
   - R-Car H1 (R8A77790)
@@ -107,6 +113,8 @@ Boards:
     compatible = "renesas,lager", "renesas,r8a7790"
   - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
     compatible = "renesas,m3ulcb", "renesas,r8a7796"
+  - M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
+    compatible = "renesas,m3nulcb", "renesas,r8a77965"
   - Marzen (R0P7779A00010S)
     compatible = "renesas,marzen", "renesas,r8a7779"
   - Porter (M2-LCDP)
@@ -143,12 +151,12 @@ Boards:
     compatible = "renesas,wheat", "renesas,r8a7792"
 
 
-Most Renesas ARM SoCs have a Product Register that allows to retrieve SoC
-product and revision information.  If present, a device node for this register
-should be added.
+Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that
+allows to retrieve SoC product and revision information.  If present, a device
+node for this register should be added.
 
 Required properties:
-  - compatible: Must be "renesas,prr".
+  - compatible: Must be "renesas,prr" or "renesas,bsid"
   - reg: Base address and length of the register block.
 
 
diff --git a/Bindings/arm/marvell/marvell,berlin.txt b/Bindings/arm/syna.txt
index 3bab18409b7a..2face46a5f64 100644
--- a/Bindings/arm/marvell/marvell,berlin.txt
+++ b/Bindings/arm/syna.txt
@@ -1,4 +1,9 @@
-Marvell Berlin SoC Family Device Tree Bindings
+Synaptics SoC Device Tree Bindings
+
+According to https://www.synaptics.com/company/news/conexant-marvell
+Synaptics has acquired the Multimedia Solutions Business of Marvell, so
+berlin SoCs are now Synaptics' SoCs now.
+
 ---------------------------------------------------------------
 
 Work in progress statement:
@@ -13,6 +18,10 @@ stable binding/ABI.
 
 ---------------------------------------------------------------
 
+Boards with the Synaptics AS370 SoC shall have the following properties:
+  Required root node property:
+    compatible: "syna,as370"
+
 Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
 shall have the following properties:
 
diff --git a/Bindings/arm/tegra.txt b/Bindings/arm/tegra.txt
index 32f62bb7006d..c59b15f64346 100644
--- a/Bindings/arm/tegra.txt
+++ b/Bindings/arm/tegra.txt
@@ -47,12 +47,17 @@ board-specific compatible values:
   nvidia,ventana
   toradex,apalis_t30
   toradex,apalis_t30-eval
+  toradex,apalis_t30-v1.1
+  toradex,apalis_t30-v1.1-eval
   toradex,apalis-tk1
   toradex,apalis-tk1-eval
-  toradex,colibri_t20-512
+  toradex,apalis-tk1-v1.2
+  toradex,apalis-tk1-v1.2-eval
+  toradex,colibri_t20
+  toradex,colibri_t20-eval-v3
+  toradex,colibri_t20-iris
   toradex,colibri_t30
   toradex,colibri_t30-eval-v3
-  toradex,iris
 
 Trusted Foundations
 -------------------------------------------
diff --git a/Bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Bindings/arm/tegra/nvidia,tegra186-pmc.txt
index 5a3bf7c5a7a0..c9fd6d1de57e 100644
--- a/Bindings/arm/tegra/nvidia,tegra186-pmc.txt
+++ b/Bindings/arm/tegra/nvidia,tegra186-pmc.txt
@@ -34,3 +34,96 @@ Board DTS:
 	pmc@c360000 {
 		nvidia,invert-interrupt;
 	};
+
+== Pad Control ==
+
+On Tegra SoCs a pad is a set of pins which are configured as a group.
+The pin grouping is a fixed attribute of the hardware. The PMC can be
+used to set pad power state and signaling voltage. A pad can be either
+in active or power down mode. The support for power state and signaling
+voltage configuration varies depending on the pad in question. 3.3 V and
+1.8 V signaling voltages are supported on pins where software
+controllable signaling voltage switching is available.
+
+Pad configurations are described with pin configuration nodes which
+are placed under the pmc node and they are referred to by the pinctrl
+client properties. For more information see
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+
+The following pads are present on Tegra186:
+csia		csib		dsi		mipi-bias
+pex-clk-bias	pex-clk3	pex-clk2	pex-clk1
+usb0		usb1		usb2		usb-bias
+uart		audio		hsic		dbg
+hdmi-dp0	hdmi-dp1	pex-cntrl	sdmmc2-hv
+sdmmc4		cam		dsib		dsic
+dsid		csic		csid		csie
+dsif		spi		ufs		dmic-hv
+edp		sdmmc1-hv	sdmmc3-hv	conn
+audio-hv	ao-hv
+
+Required pin configuration properties:
+  - pins: A list of strings, each of which contains the name of a pad
+	  to be configured.
+
+Optional pin configuration properties:
+  - low-power-enable: Configure the pad into power down mode
+  - low-power-disable: Configure the pad into active mode
+  - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+    TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+    The values are defined in
+    include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+
+Note: The power state can be configured on all of the above pads except
+      for ao-hv. Following pads have software configurable signaling
+      voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, audio-hv,
+      ao-hv.
+
+Pad configuration state example:
+	pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra186-pmc";
+		reg = <0 0x0c360000 0 0x10000>,
+		      <0 0x0c370000 0 0x10000>,
+		      <0 0x0c380000 0 0x10000>,
+		      <0 0x0c390000 0 0x10000>;
+		reg-names = "pmc", "wake", "aotag", "scratch";
+
+		...
+
+		sdmmc1_3v3: sdmmc1-3v3 {
+			pins = "sdmmc1-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+		};
+
+		sdmmc1_1v8: sdmmc1-1v8 {
+			pins = "sdmmc1-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+		};
+
+		hdmi_off: hdmi-off {
+			pins = "hdmi";
+			low-power-enable;
+		}
+
+		hdmi_on: hdmi-on {
+			pins = "hdmi";
+			low-power-disable;
+		}
+	};
+
+Pinctrl client example:
+	sdmmc1: sdhci@3400000 {
+		...
+		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+		pinctrl-0 = <&sdmmc1_3v3>;
+		pinctrl-1 = <&sdmmc1_1v8>;
+	};
+
+	...
+
+	sor0: sor@15540000 {
+		...
+		pinctrl-0 = <&hdmi_off>;
+		pinctrl-1 = <&hdmi_on>;
+		pinctrl-names = "hdmi-on", "hdmi-off";
+	};
diff --git a/Bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Bindings/arm/tegra/nvidia,tegra20-pmc.txt
index a74b37b07e5c..cb12f33a247f 100644
--- a/Bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ b/Bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -195,3 +195,106 @@ Example:
 		power-domains = <&pd_audio>;
 		...
 	};
+
+== Pad Control ==
+
+On Tegra SoCs a pad is a set of pins which are configured as a group.
+The pin grouping is a fixed attribute of the hardware. The PMC can be
+used to set pad power state and signaling voltage. A pad can be either
+in active or power down mode. The support for power state and signaling
+voltage configuration varies depending on the pad in question. 3.3 V and
+1.8 V signaling voltages are supported on pins where software
+controllable signaling voltage switching is available.
+
+The pad configuration state nodes are placed under the pmc node and they
+are referred to by the pinctrl client properties. For more information
+see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+The pad name should be used as the value of the pins property in pin
+configuration nodes.
+
+The following pads are present on Tegra124 and Tegra132:
+audio		bb		cam		comp
+csia		csb		cse		dsi
+dsib		dsic		dsid		hdmi
+hsic		hv		lvds		mipi-bias
+nand		pex-bias	pex-clk1	pex-clk2
+pex-cntrl	sdmmc1		sdmmc3		sdmmc4
+sys_ddc		uart		usb0		usb1
+usb2		usb_bias
+
+The following pads are present on Tegra210:
+audio		audio-hv	cam		csia
+csib		csic		csid		csie
+csif		dbg		debug-nonao	dmic
+dp		dsi		dsib		dsic
+dsid		emmc		emmc2		gpio
+hdmi		hsic		lvds		mipi-bias
+pex-bias	pex-clk1	pex-clk2	pex-cntrl
+sdmmc1		sdmmc3		spi		spi-hv
+uart		usb0		usb1		usb2
+usb3		usb-bias
+
+Required pin configuration properties:
+  - pins: Must contain name of the pad(s) to be configured.
+
+Optional pin configuration properties:
+  - low-power-enable: Configure the pad into power down mode
+  - low-power-disable: Configure the pad into active mode
+  - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8
+    or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+    The values are defined in
+    include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+
+Note: The power state can be configured on all of the Tegra124 and
+      Tegra132 pads. None of the Tegra124 or Tegra132 pads support
+      signaling voltage switching.
+
+Note: All of the listed Tegra210 pads except pex-cntrl support power
+      state configuration. Signaling voltage switching is supported on
+      following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio,
+      pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart.
+
+Pad configuration state example:
+	pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra210-pmc";
+		reg = <0x0 0x7000e400 0x0 0x400>;
+		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+
+		...
+
+		sdmmc1_3v3: sdmmc1-3v3 {
+			pins = "sdmmc1";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+		};
+
+		sdmmc1_1v8: sdmmc1-1v8 {
+			pins = "sdmmc1";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+		};
+
+		hdmi_off: hdmi-off {
+			pins = "hdmi";
+			low-power-enable;
+		}
+
+		hdmi_on: hdmi-on {
+			pins = "hdmi";
+			low-power-disable;
+		}
+	};
+
+Pinctrl client example:
+	sdmmc1: sdhci@700b0000 {
+		...
+		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+		pinctrl-0 = <&sdmmc1_3v3>;
+		pinctrl-1 = <&sdmmc1_1v8>;
+	};
+	...
+	sor@54540000 {
+		...
+		pinctrl-0 = <&hdmi_off>;
+		pinctrl-1 = <&hdmi_on>;
+		pinctrl-names = "hdmi-on", "hdmi-off";
+	};
diff --git a/Bindings/arm/ux500/boards.txt b/Bindings/arm/ux500/boards.txt
index 0fa429534f49..89408de55bfd 100644
--- a/Bindings/arm/ux500/boards.txt
+++ b/Bindings/arm/ux500/boards.txt
@@ -60,7 +60,7 @@ Example:
 			      <0xa0410100 0x100>;
 		};
 
-		scu@a04100000 {
+		scu@a0410000 {
 			compatible = "arm,cortex-a9-scu";
 			reg = <0xa0410000 0x100>;
 		};
diff --git a/Bindings/arm/zte,sysctrl.txt b/Bindings/arm/zte,sysctrl.txt
new file mode 100644
index 000000000000..7e66b7f7ba96
--- /dev/null
+++ b/Bindings/arm/zte,sysctrl.txt
@@ -0,0 +1,30 @@
+ZTE sysctrl Registers
+
+Registers for 'zte,zx296702' SoC:
+
+System management required properties:
+      - compatible = "zte,sysctrl"
+
+Low power management required properties:
+      - compatible = "zte,zx296702-pcu"
+
+Bus matrix required properties:
+      - compatible = "zte,zx-bus-matrix"
+
+
+Registers for 'zte,zx296718' SoC:
+
+System management required properties:
+      - compatible = "zte,zx296718-aon-sysctrl"
+      - compatible = "zte,zx296718-sysctrl"
+
+Example:
+aon_sysctrl: aon-sysctrl@116000 {
+	compatible = "zte,zx296718-aon-sysctrl", "syscon";
+	reg = <0x116000 0x1000>;
+};
+
+sysctrl: sysctrl@1463000 {
+	compatible = "zte,zx296718-sysctrl", "syscon";
+	reg = <0x1463000 0x1000>;
+};
diff --git a/Bindings/arm/zte.txt b/Bindings/arm/zte.txt
index 83369785d29c..340612794a37 100644
--- a/Bindings/arm/zte.txt
+++ b/Bindings/arm/zte.txt
@@ -1,20 +1,10 @@
 ZTE platforms device tree bindings
----------------------------------------
 
+---------------------------------------
 -  ZX296702 board:
     Required root node properties:
       - compatible = "zte,zx296702-ad1", "zte,zx296702"
 
-System management required properties:
-      - compatible = "zte,sysctrl"
-
-Low power management required properties:
-      - compatible = "zte,zx296702-pcu"
-
-Bus matrix required properties:
-      - compatible = "zte,zx-bus-matrix"
-
-
 ---------------------------------------
 -  ZX296718 SoC:
     Required root node properties:
@@ -22,18 +12,3 @@ Bus matrix required properties:
 
 ZX296718 EVB board:
       - "zte,zx296718-evb"
-
-System management required properties:
-      - compatible = "zte,zx296718-aon-sysctrl"
-      - compatible = "zte,zx296718-sysctrl"
-
-Example:
-aon_sysctrl: aon-sysctrl@116000 {
-	compatible = "zte,zx296718-aon-sysctrl", "syscon";
-	reg = <0x116000 0x1000>;
-};
-
-sysctrl: sysctrl@1463000 {
-	compatible = "zte,zx296718-sysctrl", "syscon";
-	reg = <0x1463000 0x1000>;
-};