vendor/device-tree/ian-c8c1b3a7

1 files changed, 21 insertions, 0 deletions

diff --git a/Bindings/net/amd-xgbe-phy.txt b/Bindings/net/amd-xgbe-phy.txt
index 42409bfe04c4..33df3932168e 100644
--- a/Bindings/net/amd-xgbe-phy.txt
+++ b/Bindings/net/amd-xgbe-phy.txt
@@ -7,17 +7,38 @@ Required properties:
    - SerDes Rx/Tx registers
    - SerDes integration registers (1/2)
    - SerDes integration registers (2/2)
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the amd-xgbe-phy interrupt.
 
 Optional properties:
 - amd,speed-set: Speed capabilities of the device
     0 - 1GbE and 10GbE (default)
     1 - 2.5GbE and 10GbE
 
+The following optional properties are represented by an array with each
+value corresponding to a particular speed. The first array value represents
+the setting for the 1GbE speed, the second value for the 2.5GbE speed and
+the third value for the 10GbE speed.  All three values are required if the
+property is used.
+- amd,serdes-blwc: Baseline wandering correction enablement
+    0 - Off
+    1 - On
+- amd,serdes-cdr-rate: CDR rate speed selection
+- amd,serdes-pq-skew: PQ (data sampling) skew
+- amd,serdes-tx-amp: TX amplitude boost
+
 Example:
 	xgbe_phy@e1240800 {
 		compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
 		reg = <0 0xe1240800 0 0x00400>,
 		      <0 0xe1250000 0 0x00060>,
 		      <0 0xe1250080 0 0x00004>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 323 4>;
 		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <30>;
+		amd,serdes-tx-amp = <15>, <15>, <10>;
 	};