vendor/llvm/llvm-trunk-r321017

1 files changed, 35 insertions, 42 deletions

diff --git a/docs/tutorial/BuildingAJIT2.rst b/docs/tutorial/BuildingAJIT2.rst
index 2f22bdad6c14..f1861033cc79 100644
--- a/docs/tutorial/BuildingAJIT2.rst
+++ b/docs/tutorial/BuildingAJIT2.rst
@@ -46,7 +46,7 @@ Chapter 1 and compose an ORC *IRTransformLayer* on top. We will look at how the
 IRTransformLayer works in more detail below, but the interface is simple: the
 constructor for this layer takes a reference to the layer below (as all layers
 do) plus an *IR optimization function* that it will apply to each Module that
-is added via addModuleSet:
+is added via addModule:
 
 .. code-block:: c++
 
@@ -54,19 +54,20 @@ is added via addModuleSet:
   private:
     std::unique_ptr<TargetMachine> TM;
     const DataLayout DL;
-    ObjectLinkingLayer<> ObjectLayer;
+    RTDyldObjectLinkingLayer<> ObjectLayer;
     IRCompileLayer<decltype(ObjectLayer)> CompileLayer;
 
-    typedef std::function<std::unique_ptr<Module>(std::unique_ptr<Module>)>
-      OptimizeFunction;
+    using OptimizeFunction =
+        std::function<std::shared_ptr<Module>(std::shared_ptr<Module>)>;
 
     IRTransformLayer<decltype(CompileLayer), OptimizeFunction> OptimizeLayer;
 
   public:
-    typedef decltype(OptimizeLayer)::ModuleSetHandleT ModuleHandle;
+    using ModuleHandle = decltype(OptimizeLayer)::ModuleHandleT;
 
     KaleidoscopeJIT()
         : TM(EngineBuilder().selectTarget()), DL(TM->createDataLayout()),
+          ObjectLayer([]() { return std::make_shared<SectionMemoryManager>(); }),
           CompileLayer(ObjectLayer, SimpleCompiler(*TM)),
           OptimizeLayer(CompileLayer,
                         [this](std::unique_ptr<Module> M) {
@@ -101,9 +102,8 @@ define below.
 .. code-block:: c++
 
   // ...
-  return OptimizeLayer.addModuleSet(std::move(Ms),
-                                    make_unique<SectionMemoryManager>(),
-                                    std::move(Resolver));
+  return cantFail(OptimizeLayer.addModule(std::move(M),
+                                          std::move(Resolver)));
   // ...
 
 .. code-block:: c++
@@ -115,17 +115,17 @@ define below.
 .. code-block:: c++
 
   // ...
-  OptimizeLayer.removeModuleSet(H);
+  cantFail(OptimizeLayer.removeModule(H));
   // ...
 
 Next we need to replace references to 'CompileLayer' with references to
 OptimizeLayer in our key methods: addModule, findSymbol, and removeModule. In
 addModule we need to be careful to replace both references: the findSymbol call
-inside our resolver, and the call through to addModuleSet.
+inside our resolver, and the call through to addModule.
 
 .. code-block:: c++
 
-  std::unique_ptr<Module> optimizeModule(std::unique_ptr<Module> M) {
+  std::shared_ptr<Module> optimizeModule(std::shared_ptr<Module> M) {
     // Create a function pass manager.
     auto FPM = llvm::make_unique<legacy::FunctionPassManager>(M.get());
 
@@ -166,37 +166,30 @@ implementations of the layer concept that can be devised:
   template <typename BaseLayerT, typename TransformFtor>
   class IRTransformLayer {
   public:
-    typedef typename BaseLayerT::ModuleSetHandleT ModuleSetHandleT;
+    using ModuleHandleT = typename BaseLayerT::ModuleHandleT;
 
     IRTransformLayer(BaseLayerT &BaseLayer,
                      TransformFtor Transform = TransformFtor())
       : BaseLayer(BaseLayer), Transform(std::move(Transform)) {}
 
-    template <typename ModuleSetT, typename MemoryManagerPtrT,
-              typename SymbolResolverPtrT>
-    ModuleSetHandleT addModuleSet(ModuleSetT Ms,
-                                  MemoryManagerPtrT MemMgr,
-                                  SymbolResolverPtrT Resolver) {
-
-      for (auto I = Ms.begin(), E = Ms.end(); I != E; ++I)
-        *I = Transform(std::move(*I));
-
-      return BaseLayer.addModuleSet(std::move(Ms), std::move(MemMgr),
-                                  std::move(Resolver));
+    Expected<ModuleHandleT>
+    addModule(std::shared_ptr<Module> M,
+              std::shared_ptr<JITSymbolResolver> Resolver) {
+      return BaseLayer.addModule(Transform(std::move(M)), std::move(Resolver));
     }
 
-    void removeModuleSet(ModuleSetHandleT H) { BaseLayer.removeModuleSet(H); }
+    void removeModule(ModuleHandleT H) { BaseLayer.removeModule(H); }
 
     JITSymbol findSymbol(const std::string &Name, bool ExportedSymbolsOnly) {
       return BaseLayer.findSymbol(Name, ExportedSymbolsOnly);
     }
 
-    JITSymbol findSymbolIn(ModuleSetHandleT H, const std::string &Name,
+    JITSymbol findSymbolIn(ModuleHandleT H, const std::string &Name,
                            bool ExportedSymbolsOnly) {
       return BaseLayer.findSymbolIn(H, Name, ExportedSymbolsOnly);
     }
 
-    void emitAndFinalize(ModuleSetHandleT H) {
+    void emitAndFinalize(ModuleHandleT H) {
       BaseLayer.emitAndFinalize(H);
     }
 
@@ -215,14 +208,14 @@ comments. It is a template class with two template arguments: ``BaesLayerT`` and
 ``TransformFtor`` that provide the type of the base layer and the type of the
 "transform functor" (in our case a std::function) respectively. This class is
 concerned with two very simple jobs: (1) Running every IR Module that is added
-with addModuleSet through the transform functor, and (2) conforming to the ORC
+with addModule through the transform functor, and (2) conforming to the ORC
 layer interface. The interface consists of one typedef and five methods:
 
 +------------------+-----------------------------------------------------------+
 |     Interface    |                         Description                       |
 +==================+===========================================================+
 |                  | Provides a handle that can be used to identify a module   |
-| ModuleSetHandleT | set when calling findSymbolIn, removeModuleSet, or        |
+| ModuleHandleT    | set when calling findSymbolIn, removeModule, or           |
 |                  | emitAndFinalize.                                          |
 +------------------+-----------------------------------------------------------+
 |                  | Takes a given set of Modules and makes them "available    |
@@ -231,28 +224,28 @@ layer interface. The interface consists of one typedef and five methods:
 |                  | the address of the symbols should be read/writable (for   |
 |                  | data symbols), or executable (for function symbols) after |
 |                  | JITSymbol::getAddress() is called. Note: This means that  |
-|   addModuleSet   | addModuleSet doesn't have to compile (or do any other     |
+|   addModule      | addModule doesn't have to compile (or do any other        |
 |                  | work) up-front. It *can*, like IRCompileLayer, act        |
 |                  | eagerly, but it can also simply record the module and     |
 |                  | take no further action until somebody calls               |
 |                  | JITSymbol::getAddress(). In IRTransformLayer's case       |
-|                  | addModuleSet eagerly applies the transform functor to     |
+|                  | addModule eagerly applies the transform functor to        |
 |                  | each module in the set, then passes the resulting set     |
 |                  | of mutated modules down to the layer below.               |
 +------------------+-----------------------------------------------------------+
 |                  | Removes a set of modules from the JIT. Code or data       |
-|  removeModuleSet | defined in these modules will no longer be available, and |
+|  removeModule    | defined in these modules will no longer be available, and |
 |                  | the memory holding the JIT'd definitions will be freed.   |
 +------------------+-----------------------------------------------------------+
 |                  | Searches for the named symbol in all modules that have    |
-|                  | previously been added via addModuleSet (and not yet       |
-|    findSymbol    | removed by a call to removeModuleSet). In                 |
+|                  | previously been added via addModule (and not yet          |
+|    findSymbol    | removed by a call to removeModule). In                    |
 |                  | IRTransformLayer we just pass the query on to the layer   |
 |                  | below. In our REPL this is our default way to search for  |
 |                  | function definitions.                                     |
 +------------------+-----------------------------------------------------------+
 |                  | Searches for the named symbol in the module set indicated |
-|                  | by the given ModuleSetHandleT. This is just an optimized  |
+|                  | by the given ModuleHandleT. This is just an optimized     |
 |                  | search, better for lookup-speed when you know exactly     |
 |                  | a symbol definition should be found. In IRTransformLayer  |
 |   findSymbolIn   | we just pass this query on to the layer below. In our     |
@@ -262,7 +255,7 @@ layer interface. The interface consists of one typedef and five methods:
 |                  | we just added.                                            |
 +------------------+-----------------------------------------------------------+
 |                  | Forces all of the actions required to make the code and   |
-|                  | data in a module set (represented by a ModuleSetHandleT)  |
+|                  | data in a module set (represented by a ModuleHandleT)     |
 |                  | accessible. Behaves as if some symbol in the set had been |
 |                  | searched for and JITSymbol::getSymbolAddress called. This |
 | emitAndFinalize  | is rarely needed, but can be useful when dealing with     |
@@ -276,11 +269,11 @@ wrinkles like emitAndFinalize for performance), similar to the basic JIT API
 operations we identified in Chapter 1. Conforming to the layer concept allows
 classes to compose neatly by implementing their behaviors in terms of the these
 same operations, carried out on the layer below. For example, an eager layer
-(like IRTransformLayer) can implement addModuleSet by running each module in the
+(like IRTransformLayer) can implement addModule by running each module in the
 set through its transform up-front and immediately passing the result to the
-layer below. A lazy layer, by contrast, could implement addModuleSet by
+layer below. A lazy layer, by contrast, could implement addModule by
 squirreling away the modules doing no other up-front work, but applying the
-transform (and calling addModuleSet on the layer below) when the client calls
+transform (and calling addModule on the layer below) when the client calls
 findSymbol instead. The JIT'd program behavior will be the same either way, but
 these choices will have different performance characteristics: Doing work
 eagerly means the JIT takes longer up-front, but proceeds smoothly once this is
@@ -319,7 +312,7 @@ IRTransformLayer added to enable optimization. To build this example, use:
 .. code-block:: bash
 
     # Compile
-    clang++ -g toy.cpp `llvm-config --cxxflags --ldflags --system-libs --libs core orc native` -O3 -o toy
+    clang++ -g toy.cpp `llvm-config --cxxflags --ldflags --system-libs --libs core orcjit native` -O3 -o toy
     # Run
     ./toy
 
@@ -329,8 +322,8 @@ Here is the code:
    :language: c++
 
 .. [1] When we add our top-level expression to the JIT, any calls to functions
-       that we defined earlier will appear to the ObjectLinkingLayer as
-       external symbols. The ObjectLinkingLayer will call the SymbolResolver
-       that we defined in addModuleSet, which in turn calls findSymbol on the
+       that we defined earlier will appear to the RTDyldObjectLinkingLayer as
+       external symbols. The RTDyldObjectLinkingLayer will call the SymbolResolver
+       that we defined in addModule, which in turn calls findSymbol on the
        OptimizeLayer, at which point even a lazy transform layer will have to
        do its work.