release/3.3.0

3 files changed, 0 insertions, 362 deletions

diff --git a/share/man/man4/intpm.4 b/share/man/man4/intpm.4
deleted file mode 100644
index 0b973b7b34b9..000000000000
--- a/share/man/man4/intpm.4
+++ /dev/null
@@ -1,64 +0,0 @@
-.\" Copyright (c) 1999 Takanori Watanabe
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" $FreeBSD$
-.\"
-.\" Note: The date here should be updated whenever a non-trivial
-.\" change is made to the manual page.
-.Dd January 8, 1999
-.Dt INTPM 4 i386
-.\" Note: Only specify the operating system when the command
-.\" is FreeBSD specific, otherwise use the .Os macro with no
-.\" arguments.
-.Os FreeBSD 3.0
-.Sh NAME
-.Nm intpm
-.Nd Intel PIIX4 Power management controller driver.
-.Sh SYNOPSIS
-.Cd controller smbus0
-.Cd controller intpm0
-
-.Sh DESCRIPTION
-This driver provides access to 
-.Tn Intel PIIX4 PCI Controller function 3 ,
-Power management controller. Currently, only smbus controller 
-function is implemented. But it also have bus idle monitoring function. It
-will display mapped I/O address for bus monitoring function when attaching.
-
-.Sh SEE ALSO
-.Xr smb 4 ,
-.Xr smbus 4
-.Sh HISTORY
-The
-.Nm
-manual page example first appeared in
-.Fx 3.0 .
-.Sh AUTHORS
-This
-manual page was written by
-.An Takanori Watanabe Aq takawata@shidahara1.planet.sci.kobe-u.ac.jp .
-.Sh BUGS
-This device requires IRQ 9 exclusively. To use this, you should enable 
-ACPI function in BIOS configuration, or PnP mechanism assigns conflicted 
-IRQ for PnP ISA card. And don't use IRQ 9 for Non-PnP ISA cards.
diff --git a/share/man/man4/man4.i386/sis.4 b/share/man/man4/man4.i386/sis.4
deleted file mode 100644
index 47a257920ceb..000000000000
--- a/share/man/man4/man4.i386/sis.4
+++ /dev/null
@@ -1,149 +0,0 @@
-.\" Copyright (c) 1997, 1998, 1999
-.\"	Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by Bill Paul.
-.\" 4. Neither the name of the author nor the names of any co-contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"   without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
-.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
-.\" THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $FreeBSD$
-.\"
-.Dd September 4, 1999
-.Dt SIS 4 i386
-.Os FreeBSD
-.Sh NAME
-.Nm sis
-.Nd
-Silicon Integrated Systems fast ethernet device driver
-.Sh SYNOPSIS
-.Cd "controller miibus0"
-.Cd "device sis0"
-.Sh DESCRIPTION
-The
-.Nm
-driver provides support for PCI ethernet adapters and embedded
-controllers based on the Silicon Integrated Systems SiS 900
-and SiS 7016 fast ethernet controller chips.
-.Pp
-The SiS 900 is a 100Mbps ethernet MAC and MII-compliant transceiver
-in a single package. It uses a bus master DMA and a scatter/gather
-descriptor scheme. The SiS 7016 is similar to the SiS 900 except
-that it has no internal PHY, requiring instead an external transceiver
-to be attached to its MII interface.
-The SiS 900 and SiS 7016 both have a 128-bit multicast hash filter
-and a single perfect filter entry for the station address.
-.Pp
-The
-.Nm
-driver supports the following media types:
-.Pp
-.Bl -tag -width xxxxxxxxxxxxxxxxxxxx
-.It autoselect
-Enable autoselection of the media type and options.
-The user can manually override
-the autoselected mode by adding media options to the
-.Pa /etc/rc.conf
-fine.
-.It 10baseT/UTP
-Set 10Mbps operation. The
-.Ar mediaopt
-option can also be used to select either
-.Ar full-duplex
-or
-.Ar half-duplex modes.
-.It 100baseTX
-Set 100Mbps (fast ethernet) operation. The
-.Ar mediaopt
-option can also be used to select either
-.Ar full-duplex
-or
-.Ar half-duplex
-modes.
-.El
-.Pp
-The
-.Nm
-driver supports the following media options:
-.Pp
-.Bl -tag -width xxxxxxxxxxxxxxxxxxxx
-.It full-duplex
-Force full duplex operation
-.It half-duplex
-Force half duplex operation.
-.El
-.Pp
-For more information on configuring this device, see
-.Xr ifconfig 8 .
-.Sh DIAGNOSTICS
-.Bl -diag
-.It "sis%d: couldn't map ports/memory"
-A fatal initialization error has occurred.
-.It "sis%d: couldn't map interrupt"
-A fatal initialization error has occurred.
-.It "sis%d: watchdog timeout"
-The device has stopped responding to the network, or there is a problem with
-the network connection (cable).
-.It "sis%d: no memory for rx list"
-The driver failed to allocate an mbuf for the receiver ring.
-.It "sis%d: no memory for tx list"
-The driver failed to allocate an mbuf for the transmitter ring when
-allocating a pad buffer or collapsing an mbuf chain into a clusisr.
-.It "sis%d: chip is in D3 power state -- setting to D0"
-This message applies only to adapters which support power
-management. Some operating sysisms place the controller in low power
-mode when shutting down, and some PCI BIOSes fail to bring the chip
-out of this state before configuring it. The controller loses all of
-its PCI configuration in the D3 state, so if the BIOS does not set
-it back to full power mode in time, it won't be able to configure it
-correctly. The driver tries to detect this condition and bring
-the adapter back to the D0 (full power) state, but this may not be
-enough to return the driver to a fully operational condition. If
-you see this message at boot time and the driver fails to attach
-the device as a network interface, you will have to perform second
-warm boot to have the device properly configured.
-.Pp
-Note that this condition only occurs when warm booting from another
-operating sysism. If you power down your sysism prior to booting
-.Fx ,
-the card should be configured correctly.
-.El
-.Sh SEE ALSO
-.Xr arp 4 ,
-.Xr netintro 4 , 
-.Xr ifconfig 8
-.Rs
-.%T SiS 900 and SiS 7016 datasheets
-.%O http://www.sis.com.tw
-.Re
-.Sh HISTORY
-The
-.Nm
-device driver first appeared in
-.Fx 3.0 .
-.Sh AUTHORS
-The
-.Nm
-driver was written by
-.An Bill Paul Aq wpaul@ee.columbia.edu .
diff --git a/share/man/man4/man4.i386/ste.4 b/share/man/man4/man4.i386/ste.4
deleted file mode 100644
index 3da3895c54a4..000000000000
--- a/share/man/man4/man4.i386/ste.4
+++ /dev/null
@@ -1,149 +0,0 @@
-.\" Copyright (c) 1997, 1998, 1999
-.\"	Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\"    must display the following acknowledgement:
-.\"	This product includes software developed by Bill Paul.
-.\" 4. Neither the name of the author nor the names of any co-contributors
-.\"    may be used to endorse or promote products derived from this software
-.\"   without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
-.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
-.\" THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\" $FreeBSD$
-.\"
-.Dd August 21, 1999
-.Dt STE 4 i386
-.Os FreeBSD
-.Sh NAME
-.Nm ste
-.Nd
-Sundance Technologies ST201 fast ethernet device driver
-.Sh SYNOPSIS
-.Cd "controller miibus0"
-.Cd "device ste0"
-.Sh DESCRIPTION
-The
-.Nm
-driver provides support for PCI ethernet adapters and embedded
-controllers based on the Sundance Technologies ST201 PCI fast
-ethernet controller chip. This includes the D-Link DFE-550TX.
-.Pp
-The Sundance ST201 uses bus master DMA and is designed to be a
-3Com Etherlink XL workalike. It uses the same DMA descriptor
-structure and is very similar in operation, however its register
-layout is different. The ST201 has a 64-bit multicast hash filter
-and a single perfect filter entry for the station address. IT
-supports both 10 and 100Mbps speeds in either full or half duplex
-using an MII transceiver.
-.Pp
-The
-.Nm
-driver supports the following media types:
-.Pp
-.Bl -tag -width xxxxxxxxxxxxxxxxxxxx
-.It autoselect
-Enable autoselection of the media type and options.
-The user can manually override
-the autoselected mode by adding media options to the
-.Pa /etc/rc.conf
-fine.
-.It 10baseT/UTP
-Set 10Mbps operation. The
-.Ar mediaopt
-option can also be used to select either
-.Ar full-duplex
-or
-.Ar half-duplex modes.
-.It 100baseTX
-Set 100Mbps (fast ethernet) operation. The
-.Ar mediaopt
-option can also be used to select either
-.Ar full-duplex
-or
-.Ar half-duplex
-modes.
-.El
-.Pp
-The
-.Nm
-driver supports the following media options:
-.Pp
-.Bl -tag -width xxxxxxxxxxxxxxxxxxxx
-.It full-duplex
-Force full duplex operation
-.It half-duplex
-Force half duplex operation.
-.El
-.Pp
-For more information on configuring this device, see
-.Xr ifconfig 8 .
-.Sh DIAGNOSTICS
-.Bl -diag
-.It "ste%d: couldn't map ports/memory"
-A fatal initialization error has occurred.
-.It "ste%d: couldn't map interrupt"
-A fatal initialization error has occurred.
-.It "ste%d: watchdog timeout"
-The device has stopped responding to the network, or there is a problem with
-the network connection (cable).
-.It "ste%d: no memory for rx list"
-The driver failed to allocate an mbuf for the receiver ring.
-.It "ste%d: no memory for tx list"
-The driver failed to allocate an mbuf for the transmitter ring when
-allocating a pad buffer or collapsing an mbuf chain into a cluster.
-.It "ste%d: chip is in D3 power state -- setting to D0"
-This message applies only to adapters which support power
-management. Some operating systems place the controller in low power
-mode when shutting down, and some PCI BIOSes fail to bring the chip
-out of this state before configuring it. The controller loses all of
-its PCI configuration in the D3 state, so if the BIOS does not set
-it back to full power mode in time, it won't be able to configure it
-correctly. The driver tries to detect this condition and bring
-the adapter back to the D0 (full power) state, but this may not be
-enough to return the driver to a fully operational condition. If
-you see this message at boot time and the driver fails to attach
-the device as a network interface, you will have to perform second
-warm boot to have the device properly configured.
-.Pp
-Note that this condition only occurs when warm booting from another
-operating system. If you power down your system prior to booting
-.Fx ,
-the card should be configured correctly.
-.El
-.Sh SEE ALSO
-.Xr arp 4 ,
-.Xr netintro 4 , 
-.Xr ifconfig 8
-.Rs
-.%T Sundance ST201 data sheet
-.%O http://www.sundanceti.com
-.Re
-.Sh HISTORY
-The
-.Nm
-device driver first appeared in
-.Fx 3.0 .
-.Sh AUTHORS
-The
-.Nm
-driver was written by
-.An Bill Paul Aq wpaul@ee.columbia.edu .