1 files changed, 3 insertions, 3 deletions

diff --git a/sys/dev/uart/uart_dev_ns8250.c b/sys/dev/uart/uart_dev_ns8250.c
index a36afefb649f..2498fa37db76 100644
--- a/sys/dev/uart/uart_dev_ns8250.c
+++ b/sys/dev/uart/uart_dev_ns8250.c
@@ -565,7 +565,7 @@ ns8250_bus_getsig(struct uart_softc *sc)
 	 * when capturing PPS pulses which are too narrow for software detection
 	 * to see the edges.  Hardware delta for RI doesn't work like the
 	 * others, so always use software for it.  Other threads may be changing
-	 * other (non-MSR) bits in sc_hwsig, so loop until it can succesfully
+	 * other (non-MSR) bits in sc_hwsig, so loop until it can successfully
 	 * update without other changes happening.  Note that the SIGCHGxx()
 	 * macros carefully preserve the delta bits when we have to loop several
 	 * times and a signal transitions between iterations.
@@ -882,7 +882,7 @@ ns8250_bus_probe(struct uart_softc *sc)
 #if 0
 	/*
 	 * XXX there are some issues related to hardware flow control and
-	 * it's likely that uart(4) is the cause. This basicly needs more
+	 * it's likely that uart(4) is the cause. This basically needs more
 	 * investigation, but we avoid using for hardware flow control
 	 * until then.
 	 */
@@ -996,7 +996,7 @@ ns8250_bus_grab(struct uart_softc *sc)
 	/*
 	 * turn off all interrupts to enter polling mode. Leave the
 	 * saved mask alone. We'll restore whatever it was in ungrab.
-	 * All pending interupt signals are reset when IER is set to 0.
+	 * All pending interrupt signals are reset when IER is set to 0.
 	 */
 	uart_lock(sc->sc_hwmtx);
 	ier = uart_getreg(bas, REG_IER);