diff options
| -rw-r--r-- | release/doc/en_US.ISO8859-1/relnotes/article.xml | 354 | ||||
| -rw-r--r-- | release/doc/en_US.ISO8859-1/relnotes/man-refs.ent | 1 |
2 files changed, 298 insertions, 57 deletions
diff --git a/release/doc/en_US.ISO8859-1/relnotes/article.xml b/release/doc/en_US.ISO8859-1/relnotes/article.xml index 58dcc8c79ea6..acc27d1fcd33 100644 --- a/release/doc/en_US.ISO8859-1/relnotes/article.xml +++ b/release/doc/en_US.ISO8859-1/relnotes/article.xml @@ -253,6 +253,24 @@ <para revision="232757">A bug which could cause a kernel thread to have a wrong CPU affinity configuration has been fixed.</para> + <para revision="245847">&man.loader.8; environment variables + <varname>comconsole_port</varname> and + <varname>comconsole_pcidev</varname> have been added. The + former allows to set the base address of the serial console + I/O port. The later takes the string of the format + <literal><replaceable>bus</replaceable>:<replaceable>device</replaceable>:<replaceable>function</replaceable>:<replaceable>[bar]</replaceable></literal> + as a value and uses the serial port attached as PCI device at + the specified location for console. Both variants pass + <varname>hw.uart.console</varname> variable to the + &man.uart.4; driver to properly hand-over the kernel + console.</para> + + <para revision="246626">A new &man.loader.8; tunable + <varname>hw.broken_txfifo</varname> has been added to enable + workaround for old version of <application>QEMU</application> + and <application>Xen</application> which have a buggy emulated + UART.</para> + <para revision="239860,239861">The <literal>F_DUPFD_CLOEXEC</literal> command for &man.fcntl.2; has been implemented. This is standardized in IEEE Std @@ -278,6 +296,17 @@ <filename>GENERIC</filename> kernel to support break-to-debugger capability.</para> + <para revision="241246">The &os; &man.sched.ule.4; scheduler has + been improved in CPU selection on systems which support SMT + (Symmetric MultiThreading, also known as HyperThreading on + Intel CPUs). It now prefers a logical CPU when the the other + logical CPUs on the physical one are idle, and an idle CPU in + an SMT CPU group always has lower priority. The CPU load + calculation for load balancing has also been improved to + consider highest and lowest CPU load in comparison to + differentiate load in CPU groups. This change gives 10-15% + performance improvement in SMT CPUs such as Core i7.</para> + <para revision="236684">The &man.shm.map.9; and &man.shm.unmap.9; functions have been added to allow in-kernel code to map portions of shared memory objects created by @@ -389,6 +418,10 @@ found on machines which have Japanese PS/2 keyboard with 106/109 keys.</para> + <para revision="244982" arch="amd64,i386,pc98">The + &man.atkbdc.4; driver now supports Synaptics touchpad v7.5 + and above.</para> + <para revision="233369">A bug in &man.cpufreq.4; which could prevent CPU frequency tuning from working properly has been fixed.</para> @@ -406,10 +439,12 @@ bus briges. This change improves handling of MSIs on AMD CPUs.</para> - <para revision="236651,238775">The &man.puc.4; driver now - supports Sun 1040 PCI Quad Serial and Moxa PCIe + <para revision="236651,238775,243009,248041">The &man.puc.4; + driver now supports Sun 1040 PCI Quad Serial, Moxa PCIe CP102E/CP102EL/CP104EL-A/CP104JU/CP114EL/CP118EL-A/CP168EL-A - multiport serial boards.</para> + multiport serial boards, Advantech PCI-1602 RS-485/RS-422 + serial card, and Sunix SER5437A dual serial PCI Express + card.</para> <para revision="240991" arch="amd64,i386">The &man.random.4; driver now supports VIA C3 Nehemiah random number generator @@ -427,11 +462,21 @@ Danish ISO-8859-1 keyboard found on Apple MacBook has been added.</para> + <para revision="246787">A bug in the &man.syscons.4; driver + has been fixed. It could cause a button of a USB mouse to + be pressed and never released after detaching.</para> + <para revision="233065" arch="amd64,i386">The &man.uart.4; driver now supports Intel AMT Serial Port for Remote Keyboard and Text (KT) Redirection (Serial Over LAN) on Intel 4 Series Chipset family.</para> + <para revision="242883,243357,244140">The &man.uart.4; driver + now supports Wacom Tablet at FuS Lifebook T, multiport + serial device IrDA devices with PnP ID PNP0502, PNP0510, and + PNP0511, V.34 modems based on CIR1000 Cirrus Logic chip, and + MosChip MCS9904 four serial ports controller.</para> + <para revision="237189,237381">The &man.uftdi.4; driver now supports BeagleBone and FT2232-based egnite Turtelizer 2 JTAG/RS232 Adapter.</para> @@ -460,10 +505,10 @@ supports Silicon Laboratories CP2103/CP2104/CP2105 based USB serial adapter.</para> - <para revision="239473" arch="amd64,i386">The paravirtualized - <filename>virtio</filename> drivers have been added as - kernel modules. They include PCI fontend, - <literal>net</literal>, <literal>block</literal>, + <para revision="239473,247907,247909" arch="amd64,i386">The + paravirtualized &man.virtio.4; drivers have been added to + <filename>GENERIC</filename> kernel. They include PCI + fontend, <literal>net</literal>, <literal>block</literal>, <literal>balloon</literal>, and <literal>scsi</literal> drivers. The module files are <filename>virtio.ko</filename>, @@ -477,6 +522,17 @@ supports the watchdog timer found in Winbond Super I/O chips, has been added.</para> + <para revision="242985">The &man.xhci.4; USB driver now + supports XHCI port routing on Intel 7 Series chipsets + (Panther Point) and Intel 8 Series chipsets (Lynx Point). A + new &man.loader.8; tunable + <varname>hw.usb.xhci.xhci_port_route</varname> has been + added for routing bitmap for switching EHCI ports to XHCI + controller.</para> + + <para revision="245736">The &man.xhci.4; USB driver now + supports Etron EJ168 USB 3.0 Host Controllers.</para> + <sect4 id="mm"> <title>Multimedia Support</title> @@ -492,11 +548,26 @@ controller, multichannel recording, additional playback/record streams, higher bandwidth, and more informative device names.</para> + + <para revision="242983">The &man.snd.uaudio.4; driver now + supports USB Audio v2.0.</para> + + <para revision="247121">The &man.snd.uaudio.4; driver now + supports Intel 8 Series chipsets (Lynx Point).</para> + + <para revision="244248">The &man.snd.uaudio.4; driver now + supports various Yamaha keyboards.</para> + + <para revision="246788">The &man.snd.uaudio.4; driver now + supports buttons such as volume up/down.</para> </sect4> <sect4 id="net-if"> <title>Network Interface Support</title> + <para revision="246725">The &man.age.4; network interface + driver now supports jumbo frames.</para> + <para revision="234127">Link state change handling in the &man.ale.4; network driver has been improved.</para> @@ -524,6 +595,10 @@ controller connected behind AMD 8131 PCI-X bridge has been fixed.</para> + <para revision="243547,245152">The &man.bge.4; driver now + supports + BCM5717/5718/5719/5720/5761/57766. controllers.</para> + <para revision="233499">A bug in <varname>if_ierrors</varname> counter in the &man.bge.4; driver running on BCM5700, 5701, 5702, 5703, or 5704 @@ -537,10 +612,18 @@ &man.gem.4;, and &man.hme.4; drivers have been added to <filename>GENERIC</filename> kernel.</para> + <para revision="247670">The &man.cxgbe.4; network interface + driver has been updated to firmware version 1.8.4.</para> + <para revision="241376">A bug in statistics counters in the &man.em.4;, lem(4), and &man.igb.4; drivers has been fixed.</para> + <para revision="247430">The &man.em.4; and lem(4) network + interface drivers have been updated to version 7.3.7 and + 2.3.9, respectively. It now supports Intel 82580 and + I210/I217/I218 interfaces.</para> + <para revision="233502">The &man.fxp.4; network driver has been improved. It does not cause unnecessary media change in controller reconfiguration such as promiscuos mode @@ -561,14 +644,20 @@ chipsets, and Intel Centrino Wireless-N 100/130 devices.</para> - <para revision="236416">The &man.mxge.4; driver has been - updated to firmware version 1.4.55 from Myricom.</para> + <para revision="247501">The &man.ixgbe.4; network interface + driver has been updated to version 1.1.4.</para> <para revision="235666">A bug in &man.ixgbe.4; network driver has been fixed. It could cause a packet loss in TCP communication when TSO (TCP Segmentation Offload) is enabled.</para> + <para revision="236416">The &man.mxge.4; driver has been + updated to firmware version 1.4.55 from Myricom.</para> + + <para revision="248062">The &man.oce.4; network interface + driver has been updated to version 4.6.95.0.</para> + <para revision="236008">The &man.ral.4; network driver now supports Ralink RT2800 and RT3000 chipsets.</para> @@ -580,6 +669,9 @@ driver which could cause intermittent link up/down on RTL8169 controller has been fixed.</para> + <para revision="245858">The &man.rl.4; network interface + driver now supports D-Link DFE-520TX rev C1.</para> + <para revision="233490">WoL (Wake-on-LAN) support in the &man.rl.4; driver is now disabled by default.</para> @@ -602,17 +694,24 @@ <para revision="237145">The &man.tap.4; pseudo network interface driver now supports VIMAGE &man.jail.8;.</para> - <para revision="232875,235012">The &man.u3g.4; driver now - supports Qualcomm Vertex Wireless 110L modem, Qualcomm 3G - modem, Qualcomm Vertex VW110L modem, and SIMCom - SIM5218.</para> + <para revision="232875,235012,243655">The &man.u3g.4; driver + now supports Qualcomm Vertex Wireless 110L modem, Qualcomm + 3G modem, Qualcomm Vertex VW110L modem, SIMCom SIM5218, + and Huawei K4505, K3770, E3131, E392, E3131, K3765, K4505, + and ETS2055 3G modems.</para> + + <para revision="242984">The &man.udav.4; network interface + driver now supports JP1082 USB-LAN adapter.</para> </sect4> </sect3> <sect3 id="net-proto"> <title>Network Protocols</title> - <para revision="r236056">The &man.if.bridge.4; pseudo network + <para revision="247732">The &man.bpf.4; Berkeley Packet Filter + has been improved in the locking performance.</para> + + <para revision="236056">The &man.if.bridge.4; pseudo network interface driver now supports multiple bridges in the same STP domain. It used the same MAC address as the bridge ID for all bridges on the system.</para> @@ -642,6 +741,12 @@ to specify the maximum number of tables. The default value is <literal>128</literal>.</para> + <para revision="247944"><literal>IP_RECVTOS</literal> socket + option to receive for received UDP/IPv4 packets a cmsg of type + IP_RECVTOS which contains the TOS byte has been implemented. + This allows to implement a protocol on top of UDP and + implementing ECN.</para> + <para revision="233112">A bug in &os; IPv6 stack has been fixed. It could cause a &man.vlan.4; pseudo network interface to get the EUI64 part in an autoconfigured IPv6 @@ -720,6 +825,12 @@ cache has been fixed. It could cause extra ICMP message exchanges when an ICMP unreach is received but allocation of the corresponding TCP host cache is failed.</para> + + <para revision="247499">A &man.sysctl.8; variable + <varname>net.inet.tcp.rexmit_drop_options</varname> has been + added to not drop options from the third retransmitted SYN. + The default value is set to <literal>1</literal> for + backward compatibility.</para> </sect3> <sect3 id="disks"> @@ -729,12 +840,16 @@ Marvell 88SE9220/9230/9235 PCIe 2.0 x2 6Gbps SATA controllers.</para> - <para revision="240715">The &man.arcmsr.4; driver has been - updated to version 1.20.00.25.</para> + <para revision="244923,247827">The &man.arcmsr.4; driver has + been updated to version 1.20.00.26 and now supports + ARC-1214 and ARC-1224.</para> <para revision="236319">A bug in the &man.amr.4; driver which could cause data corruption has been fixed.</para> + <para revision="247099">The &man.ata.4; driver now supports + Intel 8 Series chipsets (Lynx Point).</para> + <para revision="234912">The &man.ata.4; driver now creates symbolic links for backward compatibility when <option>ATA_CAM</option> kernel option is enabled. In a @@ -749,6 +864,19 @@ <varname>kern.cam.ada.legacy_aliases</varname> (enabled by default when <option>ATA_CAM</option> is set).</para> + <para revision="243124">The &man.ata.4; driver now has + &man.loader.8; tunables to set initial SATA revision for the + specific device. The tunable name is + <varname>hint.ata.<replaceable>busnum</replaceable>.dev<replaceable>devnum</replaceable>.sata_rev</varname> + for a device <replaceable>devnum</replaceable> on a bus + <replaceable>busnum</replaceable>, or + <varname>hint.ata.<replaceable>busnum</replaceable>.sata_rev</varname> + for all devices on a bus <replaceable>busnum</replaceable>. + The valid values are <literal>1</literal>, + <literal>2</literal>, and <literal>3</literal>, which + correspond to 1.5 Gbps, 3 Gbps, and + 6 Gbps.</para> + <para revision="233714">A new &man.sysctl.8; <varname>kern.features.ata_cam</varname> has been added. This shows whether <literal>ATA_CAM</literal> kernel option @@ -770,11 +898,21 @@ SBC-3 (SCSI Block Commands-3) Specification is supported on the device.</para> + <para revision="247105">The &man.sysctl.8; variables + <varname>kern.cam.da.da_send_ordered</varname> and + <varname>kern.cam.ada.ada_send_ordered</varname> have been + renamed with <varname>kern.cam.da.send_ordered</varname> and + <varname>kern.cam.ada.send_ordered</varname>.</para> + <para revision="234914">The &man.da.4; driver has been improved in performance of subsequent <literal>BIO_DELETE</literal> requests handled as a single <literal>TRIM</literal> request.</para> + <para revision="245941" arch="amd64,i386">The &man.hpt27xx.4; + driver has been included in <filename>GENERIC</filename> + kernel.</para> + <para revision="239159,242216">The &man.hptiop.4; driver has bee updated to version 1.8 and now supports HighPoint RocketRAID 4500/4311/4310/4211/4210/3560/3530.</para> @@ -805,6 +943,12 @@ driver attach LSI MegaRAID cards which should be handled by the &man.mfi.4; driver has been fixed.</para> + <para revision="243826">The &man.mfi.4; driver now supports + &man.loader.8; tunable + <varname>hw.mfi.allow_cam_disk_passthrough</varname> to + control raw disk attachment. The default value is + <literal>0</literal> (disabled).</para> + <para revision="237877">The &man.mps.4; driver has been updated to version 14.00.00.01-fbsd. This now supports Integrated RAID, WarpDrive controllers, @@ -840,6 +984,14 @@ option in &man.graid.8; utility can be used to specify byte order for the DDF metadata.</para> + <para revision="246170">The <literal>RAID</literal> + &man.geom.4; class now partially supports Intel Rapid + Recover Technology (Intel RRT). It is alike to RAID1, but + with dedicating master and recovery disks and providing + manual control over synchronization. It allows to use + recovery disk as snapshot of the master disk from the time + of the last sync.</para> + <para revision="240554,240556">The <literal>RAID</literal> &man.geom.4; class now supports &man.sysctl.8; variables <varname>kern.geom.raid.enable</varname> and @@ -856,6 +1008,10 @@ <literal>raid1e</literal>, <literal>raid5</literal>, and <literal>concat</literal>.</para> + <para revision="243679">The <literal>RAID</literal> + &man.geom.4; class now supports <literal>BIO_DELETE</literal> + requests.</para> + <para revision="234512">The &man.tmpfs.5; filesystem is not an experimental implementation anymore.</para> @@ -875,6 +1031,15 @@ <sect3 id="fs"> <title>File Systems</title> + <para revision="247808">The &man.linprocfs.5; filesystem now + supports <filename>/proc/filesystems</filename>.</para> + + <para revision="246547,246548,246550">Bugs in &man.msdosfs.5; + which could fail a FAT32 filesystem to mount, create a + broken directory entry in a FAT32 filesystem, and prevent + <option>sync</option> and <option>async</option> mount + option from working, have been fixed.</para> + <para revision="233286">Bugs in &os; NFS subsystem has been fixed. They could cause stale name cache entries on an NFS client.</para> @@ -907,47 +1072,47 @@ <para revision="232665">Several bugs in &man.nullfs.5; which could cause a system panic have been fixed.</para> + <para revision="243717,244088,247310">&os; ZFS subsystem has + been updated to support feature flags for ZFS pools (the SPA + version is 5000). Asynchronous destroy of ZFS dataset, LZ4 + compression, ZIO NOP-write optimization have been + implemented as new feature. &man.loader.8; tunables + <varname>vfs.zfs.sync_pass_deferred_free</varname>, + <varname>vfs.zfs.sync_pass_dont_compress</varname>, + <varname>vfs.zfs.sync_pass_rewrite</varname>, and + <varname>vfs.zfs.nopwrite_enabled</varname> have been + added.</para> + + <para>Note that this upgrade can cause interoperability issue + when upgrading a &os; 8.4 system to 9.0 or 9.1. This is + because &os; 9.0 and 9.1 support SPA version 28 and do not + recognize version 5000. To mitigate this issue, the default + SPA version for a newly created ZFS pool on &os; 8.4 is set + to version 28. To create a ZFS pool with version 5000, use + &man.zpool.8; <command>upgrade</command> command after the + creation.</para> + + <para revision="246578">A bug in ZFS subsystem which could + cause a system panic when importing a ZFS pool has been + fixed.</para> + <para revision="235507">The &man.sysctl.8; variable <varname>vfs.zfs.txg.timeout</varname> has been changed from read-only to writable.</para> - - <para>ZFS is upgraded to support zpool feature flags. ZFS - pool creation defaults to version 28 allowing upgrades to - &os; 9.1-RELEASE, which does not support - zpool feature flags.</para> - - <para>Users who wish to enable these features can upgrade - storage pools created on &os; 8.4-RC1 and later by - running <command>zpool upgrade</command>.</para> - - <para>The new features available are:</para> - - <itemizedlist> - <listitem> - <para><literal>async_destroy</literal>: allows a ZFS - dataset to be destroyed asynchronously, reclaiming space - by a background process.</para> - </listitem> - - <listitem> - <para><literal>empty_bpobj</literal>: improves performance - and reduces disk space needed by snapshots.</para> - </listitem> - - <listitem> - <para><literal>lz4_compress</literal>: a new high - performance compression algorithm that features better - performance and compression ratio than lzjb.</para> - </listitem> - </itemizedlist> - - <para>For more information, see &man.zpool-features.7;.</para> </sect3> </sect2> <sect2 id="userland"> <title>Userland Changes</title> + <para revision="242991">The load average limit in the + &man.atrun.8; utility has been set based on the number of + CPUs.</para> + + <para revision="244064">The &man.chkgrp.8; utility now supports + <option>-q</option> flag to disable printing of text when the + group format is correct.</para> + <para revision="239877">The &man.crontab.1; utility now waits for a second before updating the spool directory's mtime. It could happen that the modified crontab updated the @@ -957,7 +1122,11 @@ <literal>crontab</literal> database is not updated properly.</para> - <para revision="234979">The default + <para revision="244305">The &man.cut.1; utility now supports + <option>-w</option> flag to specify whitespace as the + delimiter.</para> + + <para revision="234979,242642">The default <filename>dot.cshrc</filename> file for &man.csh.1; and &man.tcsh.1; has been changed. For more detail, see <filename>/usr/share/skel/dot.cshrc</filename>.</para> @@ -966,6 +1135,11 @@ <option>-r</option> flag to restart the program if it has been terminated.</para> + <para revision="247768">The &man.devd.8; daemon now supports + <literal>!</literal> character in regex matching in + &man.devd.conf.5;. It inverts the logic of the + matching.</para> + <para revision="233867">The &man.devfs.5; mount now supports <option>ruleset=number</option> mount option and updating the existing mount by using <option>-u</option> flag in the @@ -974,6 +1148,10 @@ and applies all its rules at mount time. If the specified ruleset doesn't exist, a new empty ruleset is created.</para> + <para revision="247539">The &man.du.1; utility now supports + <option>-g</option> flag to display the results in + gigabytes.</para> + <para revision="235254">The &man.fetch.1; utility now supports percent-encoded string in user and password component of a URL.</para> @@ -986,15 +1164,34 @@ supports HTTP status code <literal>305</literal> (Use Proxy) and <literal>308</literal> (Permanent Redirect).</para> + <para revision="246357">A countermeasure against a possible DoS + (Denial of Service) attack described in CVE-2010-2632 in the + &man.ftpd.8; daemon has been implemented.</para> + <para revision="235084">A new environment variable <varname>PROFIL_USE_PID</varname> has been added to generate profiling data for the &man.gprof.1; utility with a filename including the process ID.</para> + <para revision="243466">The &man.ifconfig.8; now supports + <varname>state</varname> option for &man.carp.4; protocol to + set the state of a carp cluster. The valid keywords are + <literal>master</literal> and + <literal>backup</literal>.</para> + <para revision="236875">A bug in the &man.inetd.8; daemon which could cause wrong accounting for elapsed time has been fixed.</para> + <para revision="246403">The &man.inetd.8; daemon now set the + listen queue size to the value of + <varname>kern.ipc.somaxconn</varname> instead of hardcoded value + <literal>64</literal>.</para> + + <para revision="246599">The default &man.ip6addrctl.8; address + selection policy for IPv4 and IPv6 has been updated to one in + RFC 6724.</para> + <para revision="237790">The &man.kdump.1; utility now supports a <option>-p <replaceable>pid</replaceable></option> option to accept either a process ID or a thread ID.</para> @@ -1088,6 +1285,13 @@ <varname>dsiz</varname> and <varname>ssiz</varname> keywords to show data and stack size respectively.</para> + <para revision="245077">The &man.rarpd.8; daemon now supports + &man.vlan.4; interface and <option>-P</option> option to + specify the PID file. When <option>-a</option> flag is + specified, + <filename>/var/run/rarpd.<replaceable>ifname</replaceable>.pid</filename> + is used as the PID filename by default.</para> + <para revision="234534">A bug in the &man.remquo.3; functions where the quotient did not always have the correct sign when the remainder was 0, and another bug that the remainder and @@ -1122,6 +1326,15 @@ IPv6 address as destination address in &man.syslog.conf.5;.</para> + <para revision="243684">The &man.systat.1; utility now accepts + fractional number of seconds.</para> + + <para revision="247563">The &man.tcpdrop.8; utility now accepts + the address and ports to be separated by a colon or period + rather than a space to permit directly pasting the output of + commands such as netstat and sockstat on the command + line.</para> + <para revision="239751">The &man.top.1; utility now displays ZFS ARC memory usage on hosts using ZFS.</para> @@ -1149,6 +1362,11 @@ command now supports <option>-t <replaceable>datatype</replaceable></option> option.</para> + <para revision="246750">The &man.zfs.8; <command>jail</command> + and <command>unjail</command> commands now support + <literal>jailnames</literal> and + <literal>jailid</literal>.</para> + <para revision="235952">The &man.zfs.8; <command>send</command> command now reports transmitted data size in bytes when <option>-v</option> flag is specified.</para> @@ -1171,6 +1389,10 @@ <para revision="242083">The <filename>rc.d/jail</filename> script now supports <varname>jail_parameters</varname> variable to specify extra parameters for each jail.</para> + + <para revision="246609">The &man.service.8; utility now + supports <option>-R</option> flag to restart all third party + services in <filename>/usr/local/etc/rc.d</filename>.</para> </sect3> <sect3 id="periodic-scripts"> @@ -1183,8 +1405,14 @@ <sect2 id="contrib"> <title>Contributed Software</title> - <para revision="241443"><application>ISC BIND</application> has - been updated to 9.6-ESV-R7-P4.</para> + <para revision="246374"><application>AWK</application> has been + updated to 20121220.</para> + + <para revision="248807"><application>ISC BIND</application> has + been updated to version 9.8.4-P2.</para> + + <para revision="247448"><application>BZIP2</application> has + been updated to version 1.0.6.</para> <para revision="232635"><application>TENEX C shell</application> (&man.tcsh.1;) has been updated to version 6.18.01.</para> @@ -1192,15 +1420,27 @@ <para revision="240160"><application>LESS</application> (&man.less.1;) has been updated to version v451.</para> - <para revision="237614"><application>netcat</application> has - been updated to a version as of OpenBSD 5.1.</para> + <para revision="247514"><application>libexpat</application> has + been updated to version 2.1.0.</para> + + <para revision="243819"><application>netcat</application> has + been updated to a version as of OpenBSD 5.2.</para> - <para revision="237999"><application>OpenSSL</application> has - been updated to version 0.9.8x.</para> + <para revision="247521"><application>OpenSSH</application> has + been updated to version 6.1.</para> - <para revision="233448">The <application>timezone</application> + <para revision="248057"><application>OpenSSL</application> has + been updated to version 0.9.8y.</para> + + <para revision="250167"><application>sendmail</application> has + been updated to version 8.14.7.</para> + + <para revision="243006">The <application>timezone</application> database has been updated to - <application>tzdata2012a</application> release.</para> + <application>tzdata2012j</application> release.</para> + + <para revision="245129"><application>XZ</application> has been + updated to version 5.0.4.</para> </sect2> <sect2 id="ports"> diff --git a/release/doc/en_US.ISO8859-1/relnotes/man-refs.ent b/release/doc/en_US.ISO8859-1/relnotes/man-refs.ent index b1454b7d9f38..9ca5b03b4ec5 100644 --- a/release/doc/en_US.ISO8859-1/relnotes/man-refs.ent +++ b/release/doc/en_US.ISO8859-1/relnotes/man-refs.ent @@ -7,6 +7,7 @@ <!ENTITY man.pcf8563.4 "<citerefentry><refentrytitle>pcf8563</refentrytitle><manvolnum>4</manvolnum></citerefentry>"> <!ENTITY man.uchcom.4 "<citerefentry><refentrytitle>uchcom</refentrytitle><manvolnum>4</manvolnum></citerefentry>"> +<!ENTITY man.virtio.4 "<citerefentry><refentrytitle>virtio</refentrytitle><manvolnum>4</manvolnum></citerefentry>"> <!ENTITY man.boot.config.5 "<citerefentry><refentrytitle>boot.config</refentrytitle><manvolnum>5</manvolnum></citerefentry>"> |