diff options
Diffstat (limited to 'Bindings/interrupt-controller/socionext,uniphier-aidet.txt')
| -rw-r--r-- | Bindings/interrupt-controller/socionext,uniphier-aidet.txt | 32 |
1 files changed, 32 insertions, 0 deletions
diff --git a/Bindings/interrupt-controller/socionext,uniphier-aidet.txt b/Bindings/interrupt-controller/socionext,uniphier-aidet.txt new file mode 100644 index 000000000000..48e71d3ac2ad --- /dev/null +++ b/Bindings/interrupt-controller/socionext,uniphier-aidet.txt @@ -0,0 +1,32 @@ +UniPhier AIDET + +UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC (Generic +Interrupt Controller). GIC itself can handle only high level and rising edge +interrupts. The AIDET provides logic inverter to support low level and falling +edge interrupts. + +Required properties: +- compatible: Should be one of the following: + "socionext,uniphier-ld4-aidet" - for LD4 SoC + "socionext,uniphier-pro4-aidet" - for Pro4 SoC + "socionext,uniphier-sld8-aidet" - for sLD8 SoC + "socionext,uniphier-pro5-aidet" - for Pro5 SoC + "socionext,uniphier-pxs2-aidet" - for PXs2/LD6b SoC + "socionext,uniphier-ld11-aidet" - for LD11 SoC + "socionext,uniphier-ld20-aidet" - for LD20 SoC + "socionext,uniphier-pxs3-aidet" - for PXs3 SoC +- reg: Specifies offset and length of the register set for the device. +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an interrupt + source. The value should be 2. The first cell defines the interrupt number + (corresponds to the SPI interrupt number of GIC). The second cell specifies + the trigger type as defined in interrupts.txt in this directory. + +Example: + + aidet: aidet@5fc20000 { + compatible = "socionext,uniphier-pro4-aidet"; + reg = <0x5fc20000 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; |