diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 156 |
1 files changed, 98 insertions, 58 deletions
@@ -42,36 +42,63 @@ POSIXRULES= America/New_York # Also see TZDEFRULESTRING below, which takes effect only # if the time zone files cannot be accessed. -# Everything gets put in subdirectories of. . . -TOPDIR= /usr/local +# Installation locations. +# +# The defaults are suitable for Debian, except that if REDO is +# posix_right or right_posix then files that Debian puts under +# /usr/share/zoneinfo/posix and /usr/share/zoneinfo/right are instead +# put under /usr/share/zoneinfo-posix and /usr/share/zoneinfo-leaps, +# respectively. Problems with the Debian approach are discussed in +# the commentary for the right_posix rule (below). + +# Destination directory, which can be used for staging. +# 'make DESTDIR=/stage install' installs under /stage (e.g., to +# /stage/etc/localtime instead of to /etc/localtime). Files under +# /stage are not intended to work as-is, but can be copied by hand to +# the root directory later. If DESTDIR is empty, 'make install' does +# not stage, but installs directly into production locations. +DESTDIR = + +# Everything is installed into subdirectories of TOPDIR, and used there. +# TOPDIR should be empty (meaning the root directory), +# or a directory name that does not end in "/". +# TOPDIR should be empty or an absolute name unless you're just testing. +TOPDIR = + +# The default local time zone is taken from the file TZDEFAULT. +TZDEFAULT = $(TOPDIR)/etc/localtime + +# The subdirectory containing installed program and data files, and +# likewise for installed files that can be shared among architectures. +# These should be relative file names. +USRDIR = usr +USRSHAREDIR = $(USRDIR)/share # "Compiled" time zone information is placed in the "TZDIR" directory # (and subdirectories). -# Use an absolute path name for TZDIR unless you're just testing the software. # TZDIR_BASENAME should not contain "/" and should not be ".", ".." or empty. - TZDIR_BASENAME= zoneinfo -TZDIR= $(TOPDIR)/etc/$(TZDIR_BASENAME) +TZDIR = $(TOPDIR)/$(USRSHAREDIR)/$(TZDIR_BASENAME) -# Types to try, as an alternative to time_t. int64_t should be first. -TIME_T_ALTERNATIVES= int64_t int32_t uint32_t uint64_t +# The "tzselect" and (if you do "make INSTALL") "date" commands go in: +BINDIR = $(TOPDIR)/$(USRDIR)/bin -# The "tzselect", "zic", and "zdump" commands get installed in. . . +# The "zdump" command goes in: +ZDUMPDIR = $(BINDIR) -ETCDIR= $(TOPDIR)/etc - -# If you "make INSTALL", the "date" command gets installed in. . . - -BINDIR= $(TOPDIR)/bin +# The "zic" command goes in: +ZICDIR = $(TOPDIR)/$(USRDIR)/sbin # Manual pages go in subdirectories of. . . - -MANDIR= $(TOPDIR)/man +MANDIR = $(TOPDIR)/$(USRSHAREDIR)/man # Library functions are put in an archive in LIBDIR. +LIBDIR = $(TOPDIR)/$(USRDIR)/lib -LIBDIR= $(TOPDIR)/lib + +# Types to try, as an alternative to time_t. int64_t should be first. +TIME_T_ALTERNATIVES = int64_t int32_t uint32_t uint64_t # If you want only POSIX time, with time values interpreted as # seconds since the epoch (not counting leap seconds), use @@ -105,11 +132,14 @@ REDO= posix_right TZDATA_TEXT= leapseconds tzdata.zi # For backward-compatibility links for old zone names, use +# BACKWARD= backward +# If you also want the link US/Pacific-New, even though it is confusing +# and is planned to be removed from the database eventually, use # BACKWARD= backward pacificnew # To omit these links, use # BACKWARD= -BACKWARD= backward pacificnew +BACKWARD= backward # If you want out-of-scope and often-wrong data from the file 'backzone', use # PACKRATDATA= backzone @@ -313,7 +343,7 @@ ZFLAGS= # How to use zic to install tz binary files. -ZIC_INSTALL= $(ZIC) -d $(DESTDIR)$(TZDIR) $(LEAPSECONDS) +ZIC_INSTALL= $(ZIC) -d '$(DESTDIR)$(TZDIR)' $(LEAPSECONDS) # The name of a Posix-compliant 'awk' on your system. AWK= awk @@ -341,8 +371,8 @@ SGML_CATALOG_FILES= \ VALIDATE = nsgmls VALIDATE_FLAGS = -s -B -wall -wno-unused-param VALIDATE_ENV = \ - SGML_CATALOG_FILES=$(SGML_CATALOG_FILES) \ - SGML_SEARCH_PATH=$(SGML_SEARCH_PATH) \ + SGML_CATALOG_FILES='$(SGML_CATALOG_FILES)' \ + SGML_SEARCH_PATH='$(SGML_SEARCH_PATH)' \ SP_CHARSET_FIXED=YES \ SP_ENCODING=UTF-8 @@ -396,7 +426,7 @@ GZIPFLAGS= -9n #MAKE= make cc= cc -CC= $(cc) -DTZDIR=\"$(TZDIR)\" +CC= $(cc) -DTZDIR='"$(TZDIR)"' AR= ar @@ -421,7 +451,7 @@ MANTXTS= newctime.3.txt newstrftime.3.txt newtzset.3.txt \ date.1.txt COMMON= calendars CONTRIBUTING LICENSE Makefile \ NEWS README theory.html version -WEB_PAGES= tz-art.htm tz-how-to.html tz-link.htm +WEB_PAGES= tz-art.html tz-how-to.html tz-link.html DOCS= $(MANS) date.1 $(MANTXTS) $(WEB_PAGES) PRIMARY_YDATA= africa antarctica asia australasia \ europe northamerica southamerica @@ -431,7 +461,7 @@ TDATA= $(YDATA) $(NDATA) ZONETABLES= zone1970.tab zone.tab TABDATA= iso3166.tab $(TZDATA_TEXT) $(ZONETABLES) LEAP_DEPS= leapseconds.awk leap-seconds.list -TZDATA_ZI_DEPS= zishrink.awk $(TDATA) $(PACKRATDATA) +TZDATA_ZI_DEPS= zishrink.awk version $(TDATA) $(PACKRATDATA) DATA= $(YDATA) $(NDATA) backzone iso3166.tab leap-seconds.list \ leapseconds yearistype.sh $(ZONETABLES) AWK_SCRIPTS= checklinks.awk checktab.awk leapseconds.awk zishrink.awk @@ -457,7 +487,7 @@ VERSION_DEPS= \ newctime.3 newstrftime.3 newtzset.3 northamerica \ pacificnew private.h \ southamerica strftime.c systemv theory.html \ - time2posix.3 tz-art.htm tz-how-to.html tz-link.htm \ + time2posix.3 tz-art.html tz-how-to.html tz-link.html \ tzfile.5 tzfile.h tzselect.8 tzselect.ksh \ workman.sh yearistype.sh \ zdump.8 zdump.c zic.8 zic.c \ @@ -473,35 +503,41 @@ all: tzselect yearistype zic zdump libtz.a $(TABDATA) ALL: all date $(ENCHILADA) install: all $(DATA) $(REDO) $(MANS) - mkdir -p $(DESTDIR)$(ETCDIR) $(DESTDIR)$(TZDIR) \ - $(DESTDIR)$(LIBDIR) \ - $(DESTDIR)$(MANDIR)/man3 $(DESTDIR)$(MANDIR)/man5 \ - $(DESTDIR)$(MANDIR)/man8 - $(ZIC_INSTALL) -l $(LOCALTIME) -p $(POSIXRULES) - cp -f $(TABDATA) $(DESTDIR)$(TZDIR)/. - cp tzselect zic zdump $(DESTDIR)$(ETCDIR)/. - cp libtz.a $(DESTDIR)$(LIBDIR)/. - $(RANLIB) $(DESTDIR)$(LIBDIR)/libtz.a - cp -f newctime.3 newtzset.3 $(DESTDIR)$(MANDIR)/man3/. - cp -f tzfile.5 $(DESTDIR)$(MANDIR)/man5/. - cp -f tzselect.8 zdump.8 zic.8 $(DESTDIR)$(MANDIR)/man8/. + mkdir -p '$(DESTDIR)$(BINDIR)' \ + '$(DESTDIR)$(ZDUMPDIR)' '$(DESTDIR)$(ZICDIR)' \ + '$(DESTDIR)$(LIBDIR)' \ + '$(DESTDIR)$(MANDIR)/man3' '$(DESTDIR)$(MANDIR)/man5' \ + '$(DESTDIR)$(MANDIR)/man8' + $(ZIC_INSTALL) -l $(LOCALTIME) -p $(POSIXRULES) \ + -t '$(DESTDIR)$(TZDEFAULT)' + cp -f $(TABDATA) '$(DESTDIR)$(TZDIR)/.' + cp tzselect '$(DESTDIR)$(BINDIR)/.' + cp zdump '$(DESTDIR)$(ZDUMPDIR)/.' + cp zic '$(DESTDIR)$(ZICDIR)/.' + cp libtz.a '$(DESTDIR)$(LIBDIR)/.' + $(RANLIB) '$(DESTDIR)$(LIBDIR)/libtz.a' + cp -f newctime.3 newtzset.3 '$(DESTDIR)$(MANDIR)/man3/.' + cp -f tzfile.5 '$(DESTDIR)$(MANDIR)/man5/.' + cp -f tzselect.8 zdump.8 zic.8 '$(DESTDIR)$(MANDIR)/man8/.' INSTALL: ALL install date.1 - mkdir -p $(DESTDIR)$(BINDIR) $(DESTDIR)$(MANDIR)/man1 - cp date $(DESTDIR)$(BINDIR)/. - cp -f date.1 $(DESTDIR)$(MANDIR)/man1/. + mkdir -p '$(DESTDIR)$(BINDIR)' '$(DESTDIR)$(MANDIR)/man1' + cp date '$(DESTDIR)$(BINDIR)/.' + cp -f date.1 '$(DESTDIR)$(MANDIR)/man1/.' version: $(VERSION_DEPS) { (type git) >/dev/null 2>&1 && \ V=`git describe --match '[0-9][0-9][0-9][0-9][a-z]*' \ --abbrev=7 --dirty` || \ - V=$(VERSION); } && \ + V='$(VERSION)'; } && \ printf '%s\n' "$$V" >$@.out mv $@.out $@ # This file can be tailored by setting BACKWARD, PACKRATDATA, etc. tzdata.zi: $(TZDATA_ZI_DEPS) - LC_ALL=C $(AWK) -f zishrink.awk $(TDATA) $(PACKRATDATA) >$@.out + version=`sed 1q version` && \ + LC_ALL=C $(AWK) -v version="$$version" -f zishrink.awk \ + $(TDATA) $(PACKRATDATA) >$@.out mv $@.out $@ version.h: version @@ -529,12 +565,13 @@ leapseconds: $(LEAP_DEPS) # Arguments to pass to submakes of install_data. # They can be overridden by later submake arguments. INSTALLARGS = \ - BACKWARD=$(BACKWARD) \ - DESTDIR=$(DESTDIR) \ + BACKWARD='$(BACKWARD)' \ + DESTDIR='$(DESTDIR)' \ LEAPSECONDS='$(LEAPSECONDS)' \ PACKRATDATA='$(PACKRATDATA)' \ - TZDIR=$(TZDIR) \ - YEARISTYPE=$(YEARISTYPE) \ + TZDEFAULT='$(TZDEFAULT)' \ + TZDIR='$(TZDIR)' \ + YEARISTYPE='$(YEARISTYPE)' \ ZIC='$(ZIC)' # 'make install_data' installs one set of tz binary files. @@ -558,16 +595,16 @@ right_only: # You must replace all of $(TZDIR) to switch from not using leap seconds # to using them, or vice versa. right_posix: right_only - rm -fr $(DESTDIR)$(TZDIR)-leaps - ln -s $(TZDIR_BASENAME) $(DESTDIR)$(TZDIR)-leaps || \ - $(MAKE) $(INSTALLARGS) TZDIR=$(TZDIR)-leaps right_only - $(MAKE) $(INSTALLARGS) TZDIR=$(TZDIR)-posix posix_only + rm -fr '$(DESTDIR)$(TZDIR)-leaps' + ln -s '$(TZDIR_BASENAME)' '$(DESTDIR)$(TZDIR)-leaps' || \ + $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-leaps' right_only + $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-posix' posix_only posix_right: posix_only - rm -fr $(DESTDIR)$(TZDIR)-posix - ln -s $(TZDIR_BASENAME) $(DESTDIR)$(TZDIR)-posix || \ - $(MAKE) $(INSTALLARGS) TZDIR=$(TZDIR)-posix posix_only - $(MAKE) $(INSTALLARGS) TZDIR=$(TZDIR)-leaps right_only + rm -fr '$(DESTDIR)$(TZDIR)-posix' + ln -s '$(TZDIR_BASENAME)' '$(DESTDIR)$(TZDIR)-posix' || \ + $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-posix' posix_only + $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-leaps' right_only # This obsolescent rule is present for backwards compatibility with # tz releases 2014g through 2015g. It should go away eventually. @@ -764,7 +801,7 @@ set-timestamps.out: $(ENCHILADA) check_public: $(MAKE) maintainer-clean - $(MAKE) "CFLAGS=$(GCC_DEBUG_FLAGS)" ALL + $(MAKE) CFLAGS='$(GCC_DEBUG_FLAGS)' ALL mkdir -p public.dir for i in $(TDATA) tzdata.zi; do \ $(zic) -v -d public.dir $$i 2>&1 || exit; \ @@ -790,8 +827,11 @@ check_time_t_alternatives: REDO='$(REDO)' \ install && \ diff $$quiet_option -r \ - time_t.dir/int64_t/etc/zoneinfo \ - time_t.dir/$$type/etc/zoneinfo && \ + time_t.dir/int64_t/etc \ + time_t.dir/$$type/etc && \ + diff $$quiet_option -r \ + time_t.dir/int64_t/usr/share \ + time_t.dir/$$type/usr/share && \ case $$type in \ int32_t) range=-2147483648,2147483647;; \ uint32_t) range=0,4294967296;; \ @@ -800,9 +840,9 @@ check_time_t_alternatives: *) range=-10000000000,10000000000;; \ esac && \ echo checking $$type zones ... && \ - time_t.dir/int64_t/etc/zdump -V -t $$range $$zones \ + time_t.dir/int64_t/usr/bin/zdump -V -t $$range $$zones \ >time_t.dir/int64_t.out && \ - time_t.dir/$$type/etc/zdump -V -t $$range $$zones \ + time_t.dir/$$type/usr/bin/zdump -V -t $$range $$zones \ >time_t.dir/$$type.out && \ diff -u time_t.dir/int64_t.out time_t.dir/$$type.out \ || exit; \ |