diff options
Diffstat (limited to 'MdePkg/Library/BaseDebugLibSerialPort/DebugLib.c')
| -rw-r--r-- | MdePkg/Library/BaseDebugLibSerialPort/DebugLib.c | 284 |
1 files changed, 284 insertions, 0 deletions
diff --git a/MdePkg/Library/BaseDebugLibSerialPort/DebugLib.c b/MdePkg/Library/BaseDebugLibSerialPort/DebugLib.c new file mode 100644 index 000000000000..1bef983c908d --- /dev/null +++ b/MdePkg/Library/BaseDebugLibSerialPort/DebugLib.c @@ -0,0 +1,284 @@ +/** @file + Base Debug library instance base on Serial Port library. + It uses PrintLib to send debug messages to serial port device. + + NOTE: If the Serial Port library enables hardware flow control, then a call + to DebugPrint() or DebugAssert() may hang if writes to the serial port are + being blocked. This may occur if a key(s) are pressed in a terminal emulator + used to monitor the DEBUG() and ASSERT() messages. + + Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR> + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php. + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include <Base.h> +#include <Library/DebugLib.h> +#include <Library/BaseLib.h> +#include <Library/PrintLib.h> +#include <Library/PcdLib.h> +#include <Library/BaseMemoryLib.h> +#include <Library/SerialPortLib.h> +#include <Library/DebugPrintErrorLevelLib.h> + +// +// Define the maximum debug and assert message length that this library supports +// +#define MAX_DEBUG_MESSAGE_LENGTH 0x100 + +/** + The constructor function initialize the Serial Port Library + + @retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS. + +**/ +RETURN_STATUS +EFIAPI +BaseDebugLibSerialPortConstructor ( + VOID + ) +{ + return SerialPortInitialize (); +} + +/** + Prints a debug message to the debug output device if the specified error level is enabled. + + If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function + GetDebugPrintErrorLevel (), then print the message specified by Format and the + associated variable argument list to the debug output device. + + If Format is NULL, then ASSERT(). + + @param ErrorLevel The error level of the debug message. + @param Format Format string for the debug message to print. + @param ... Variable argument list whose contents are accessed + based on the format string specified by Format. + +**/ +VOID +EFIAPI +DebugPrint ( + IN UINTN ErrorLevel, + IN CONST CHAR8 *Format, + ... + ) +{ + CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH]; + VA_LIST Marker; + + // + // If Format is NULL, then ASSERT(). + // + ASSERT (Format != NULL); + + // + // Check driver debug mask value and global mask + // + if ((ErrorLevel & GetDebugPrintErrorLevel ()) == 0) { + return; + } + + // + // Convert the DEBUG() message to an ASCII String + // + VA_START (Marker, Format); + AsciiVSPrint (Buffer, sizeof (Buffer), Format, Marker); + VA_END (Marker); + + // + // Send the print string to a Serial Port + // + SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer)); +} + + +/** + Prints an assert message containing a filename, line number, and description. + This may be followed by a breakpoint or a dead loop. + + Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n" + to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of + PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then + CpuDeadLoop() is called. If neither of these bits are set, then this function + returns immediately after the message is printed to the debug output device. + DebugAssert() must actively prevent recursion. If DebugAssert() is called while + processing another DebugAssert(), then DebugAssert() must return immediately. + + If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed. + If Description is NULL, then a <Description> string of "(NULL) Description" is printed. + + @param FileName The pointer to the name of the source file that generated the assert condition. + @param LineNumber The line number in the source file that generated the assert condition + @param Description The pointer to the description of the assert condition. + +**/ +VOID +EFIAPI +DebugAssert ( + IN CONST CHAR8 *FileName, + IN UINTN LineNumber, + IN CONST CHAR8 *Description + ) +{ + CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH]; + + // + // Generate the ASSERT() message in Ascii format + // + AsciiSPrint (Buffer, sizeof (Buffer), "ASSERT [%a] %a(%d): %a\n", gEfiCallerBaseName, FileName, LineNumber, Description); + + // + // Send the print string to the Console Output device + // + SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer)); + + // + // Generate a Breakpoint, DeadLoop, or NOP based on PCD settings + // + if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) { + CpuBreakpoint (); + } else if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) { + CpuDeadLoop (); + } +} + + +/** + Fills a target buffer with PcdDebugClearMemoryValue, and returns the target buffer. + + This function fills Length bytes of Buffer with the value specified by + PcdDebugClearMemoryValue, and returns Buffer. + + If Buffer is NULL, then ASSERT(). + If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). + + @param Buffer The pointer to the target buffer to be filled with PcdDebugClearMemoryValue. + @param Length The number of bytes in Buffer to fill with zeros PcdDebugClearMemoryValue. + + @return Buffer The pointer to the target buffer filled with PcdDebugClearMemoryValue. + +**/ +VOID * +EFIAPI +DebugClearMemory ( + OUT VOID *Buffer, + IN UINTN Length + ) +{ + // + // If Buffer is NULL, then ASSERT(). + // + ASSERT (Buffer != NULL); + + // + // SetMem() checks for the the ASSERT() condition on Length and returns Buffer + // + return SetMem (Buffer, Length, PcdGet8(PcdDebugClearMemoryValue)); +} + + +/** + Returns TRUE if ASSERT() macros are enabled. + + This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of + PcdDebugProperyMask is set. Otherwise FALSE is returned. + + @retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set. + @retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear. + +**/ +BOOLEAN +EFIAPI +DebugAssertEnabled ( + VOID + ) +{ + return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0); +} + + +/** + Returns TRUE if DEBUG() macros are enabled. + + This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of + PcdDebugProperyMask is set. Otherwise FALSE is returned. + + @retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set. + @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear. + +**/ +BOOLEAN +EFIAPI +DebugPrintEnabled ( + VOID + ) +{ + return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0); +} + + +/** + Returns TRUE if DEBUG_CODE() macros are enabled. + + This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of + PcdDebugProperyMask is set. Otherwise FALSE is returned. + + @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set. + @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear. + +**/ +BOOLEAN +EFIAPI +DebugCodeEnabled ( + VOID + ) +{ + return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0); +} + + +/** + Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled. + + This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of + PcdDebugProperyMask is set. Otherwise FALSE is returned. + + @retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set. + @retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear. + +**/ +BOOLEAN +EFIAPI +DebugClearMemoryEnabled ( + VOID + ) +{ + return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0); +} + +/** + Returns TRUE if any one of the bit is set both in ErrorLevel and PcdFixedDebugPrintErrorLevel. + + This function compares the bit mask of ErrorLevel and PcdFixedDebugPrintErrorLevel. + + @retval TRUE Current ErrorLevel is supported. + @retval FALSE Current ErrorLevel is not supported. + +**/ +BOOLEAN +EFIAPI +DebugPrintLevelEnabled ( + IN CONST UINTN ErrorLevel + ) +{ + return (BOOLEAN) ((ErrorLevel & PcdGet32(PcdFixedDebugPrintErrorLevel)) != 0); +} + |