diff options
Diffstat (limited to 'contrib/FAQ/OTHER-FAQS/Systems.FAQ')
| -rw-r--r-- | contrib/FAQ/OTHER-FAQS/Systems.FAQ | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/contrib/FAQ/OTHER-FAQS/Systems.FAQ b/contrib/FAQ/OTHER-FAQS/Systems.FAQ new file mode 100644 index 000000000000..c2e3e2ed5177 --- /dev/null +++ b/contrib/FAQ/OTHER-FAQS/Systems.FAQ @@ -0,0 +1,266 @@ + Systems FAQ + For FreeBSD + Last Modified: $Id: Systems.FAQ,v 1.1 1994/06/11 17:59:19 gclarkii Exp $ + +This FAQ is a list of systems that people have sent to the FAQ maintnance +person for inclusion. If you have a system you would like to be included +please send it to FreeBSD-FAQ@freefall.cdrom.com. + +Disclaimer: This document is composed of systems that people have sent to +the FAQ maintnance person. It is the not to be taken as an endorsement +for any system or manufacture. + + +1. + +386DX/20 real AMI, ISA +Oak SVGA (no X) +8MB +Adaptec 1542B, WD1007V ESDI +Wren VI and Miniscribe 660MB 20Mbit/sec ESDI +WD 8013EBT + +2. + +486DX/25 clone, AMI BIOS, ISA +Orchid PCIII gas plasma (yes, VGA16) +8MB +Adaptec 1542B +Micropolis 1684 SCSI +SMC 8013EEWC + +3. + + ??? OPTI chipset AMI BIOS 486/50 ISA +ISA ET4000 w/ X11 (not so slow) +16 Mb - 48 Mb swap +ISA aha1542 B +ISA no-name IDE w/ floppies +FUJITSU M2623S-512 405MB set to SCSI2 +SEAGATE ST3283N 237MB SCSI2 +SANYO CRD-400I SCSI2 cdromcdrom + +4. + +Lipizzan LDO-1 486DX-33 motherboard +Orchid ProIIs (1M) video +8 MB memory +Generic 2S/1P/2FD/IDE controller: +Maxtor 7213 AT +WDC AC2420H +PAS-16 + Sony CDU31A CD drive (Fusion 16 package). + *** The CD drive does not currently work with FreeBSD. + +5. + +Asus VL/ISA-486SV2 (ISA-VLB as you can see) +Orchid Fahrenheit 1280+ VLB (yes) +20MB +Some no-name IDE VLB controller +Conner CP30504 (I think....the 540MB IDE one) +Zoltrix 14.4/14.4 Fax/Modem on tty01 +Intel 486DX2/66 CPU + fan +Conner CP30104 (120MB....for DOS) + +6. + +AIR 486El (running with AMD486/40) +ATI Graphics Ultra Pro running XFree862.1 +16M +Adaptec 1742 +Micropolis 2217 +Wangtec 6130FS DAT drive (Some problems) + +7. + +Compudyne 486 DX2/66 +ATI Local Bus GUP w/ 2megs +16 Megs Memory +504 IDE Hard Drive +Colorado 250 meg QIC-80 tape drive + +8. + +American Megatrends Enterprise III, 486DX2-66 +ATI VLB Mach 32 (with X) +16 meg +Adaptec 1742 EISA SCSI with floppy +Toshiba 5030 SCSI-II +Toshiba 5157 SCSI-II +SMC Elite16T ISA Ethernet (ISA) + +9. + +American Megatrends Enterprise III, 486DX +ATI VLB Mach 32 (with X) +32 meg +Adaptec 1742 EISA SCSI with floppy +Maxtor P0-12S SCSI +Digital DSP5200S SCSI-II +Pro Audio Spectrum 16 +Wonder Board, 4 serial (16550), 3 parallel, each on a different interrupt + +10. + +NoName 486DX/33, Intel Chipset, EISA-Bus +ATI Graphics Ultra Pro EISA, +17" Nanao (Eizo) F550-i Monitor +Running the Mach32 X-Server XFree86-2.1.1 with fonts created from source. +16 MB RAM (planning to add another 8 MB). +AHA1742A +Conner CP3100 +Fujitsu 520 MB +Archive 525MB streamer tape. +Gravis UltraSound - works for mod-files. + +11. + +ASUS SP3 PCI Board with i486 DX/2 66 MHz +ISA ET4000 (I already tested a S3 805 PCI card successfully) +Adaptec 1542B +Toshiba XM3301TA CD-Rom +CDC Harddisk, 572 MB (I don't know the exact specs) + +12. + +Mylex MAE486/33 EISA Motherboard +16MB memory +Actix GE32+ S3 801 gfx +Adaptec 1742A controller +Seagate ST3160 drive +Seagate ST5120 drive +Archive Viper 150MB tape +Roland SCC-1 sound card +Gravis Ultrasound card +Longshine SMC/Novell compatable ethernet card + +13. + +Model: DECpc LPv 466d2 +Config: Local (Motherboard) S3 801 gfx, IDE controller, PS/2 mouse, 12MB memory + +14. + + +??? 486/DX266 EISA/VLB Motherboard +16MB memory +#9 GXE L12 VLB 3MB graphics card +Bt445S VLB disk controller +DEC DSP3105S drive +MAXSTOR P-17S drive +Tandberg 525MB tape drive +Toshiba XM3301 CDROM +Soundblaster 2.0 +Longshine SMC/Novell compatable ethernet card + +15. + +M407 PC chips with 33Mhz 486. +Had to disable external cache due to DMA problems. Board uses write-through +cache unless a second chip is added to allow write-back.write-back. +Orchid ProDesigner II (yes) +16Mb +IDE +Maxtor 7213 AT and Maxtor 7120 AT +2 BICC Isolans (Lance based cards) + +16. + +Gigabyte EISA/VLB motherboard with SIS chipset, AMI bios, 32 MB ram +Adaptec 1742 SCSI 2 controller with floppy controller enabled +Spea/V7 Mirage - S3/805 based localbus graphics card with 1 MB d-ram +no name wd8013 compatible ethernet card +Gravis Ultrasound card with 1 MB ram +2 Fujitsu 400 MB and 1 Seagate 500 MB SCSI 2 harddisks +5 1/4 + 3 1/2 inch floppy drives +Tandberg TDC3600 60 MB + Tandberg TDC3800 525 MB Streamer (these don't work +quite properly yet) + +17. + +i486DX33, 16 Mb RAM, 256 Kb external cache, VLB board +no-name IDE/floppy controller +Western Digital Caviar 2340 (325 Mb) +Kalok KL-343 (40 Mb) +Chips & Technologies 451 SuperVGA card (800x600, 16 colours, 256Kb) + +18. + +no name EISA i486DX/33 board, 16 MB RAM +Adaptec AHA-1540*A* (not knowing if the current -current might cause + problems, my kernel is from end of march) +Maxtor MXT-1240S, 1.2Gig very fast SCSI disk +Seagate ST-1144A, just to boot off the beast (also has a messdos partition yet) +Archive Viper 150 tape; has a firmware braindeadness when appending files, + works very well otherwise +ELSA Winner 1000 ISA/EISA, 1MB VRAM, S3 86C928 (unfortunately, D-step chip) +Nokia 447-B 17in monitor, running ~ 1100x800 resolution, very nice +true `Mouse Systems' optical mouse, fine thing! +sometimes a Toshiba XM-3301 CDROM, rather old, but solid & reliable + +19. + +older south-east Asia made notebook, i386SX/16, 5 MB RAM (where the 384 k hole + can be re-mapped, so all the 5 MB are useable) +Seagate ST-9145AG, 120 MB 2.5in IDE disk, very low power consumption, but + rather slow transfer rate, only about 350 K/s, so paging is a mess +640x480 LCD, ~ 16 gray tones distinguishable, Cirrus Logic CL-GD610/620 + chipset; runs generic VGA-Mono and VGA-16 XFree86[tm] servers; needs + some hacks in rc.local to give full contrast when running with the + pcvt display driver (due to their different default attribute handling) + + +20. + +Data General Dasher 386sx/16, 8 MB RAM +Adaptec AHA-1542B +Seagate ST-3655N, 525 MB SCSI disk +Conner CP-3044, 40 MB IDE disk +has been working with a Western Digital WD-1007V ESDI controller (on + secondary wdc address), and a Micropolis 1664-7 330 MB ESDI disk - + but this beast was terribly slow, loud (& unreliable) and therefore + had to go +ET-3000 based 512 K VGA, slow (wrt. XFree86), but reliable +3Com 3C503 Ethernet adaptor, suffers from the `do not nfs mount with + too large packets' problem, but works well otherwise +`Mouse Systems' optical mouse +Toshiba XM-3301 CDROM +already ran with a Micropolis 1664-3 330 MB SCSI disk (same drive as + above, but different interface) +already ran with an IBM 2Gig SCSI disk (don't remember the type) + + +21. + +Mylex MNA 486/33 EISA Motherboard +16Mb of Memory +1.2 GB Toshiba 538 SCSI disk +400Mb IBM SCSI disk +150/250Mb Tandberg SCSI tape drive +Toshiba 3401 SCSI CD-ROM +Tseng 4000 Video Controller +Logitech Bus Mouse +Mediavision Pro Audio Stereo Sound Card +Adaptech 1742A SCSI controller +WD8013EBT Ethernet Card + +22. + +386DX-40 w/Cyrix math co-processor +ET-4000 running X +16MB +IDE +540MB Western Digital +WD8003EP + + + + + + + + + + + + |