diff options
Diffstat (limited to 'contrib/binutils/bfd/elf32-sh.c')
| -rw-r--r-- | contrib/binutils/bfd/elf32-sh.c | 1909 |
1 files changed, 0 insertions, 1909 deletions
diff --git a/contrib/binutils/bfd/elf32-sh.c b/contrib/binutils/bfd/elf32-sh.c deleted file mode 100644 index 71538036453e..000000000000 --- a/contrib/binutils/bfd/elf32-sh.c +++ /dev/null @@ -1,1909 +0,0 @@ -/* Hitachi SH specific support for 32-bit ELF - Copyright 1996, 1997, 1998 Free Software Foundation, Inc. - Contributed by Ian Lance Taylor, Cygnus Support. - -This file is part of BFD, the Binary File Descriptor library. - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -#include "bfd.h" -#include "sysdep.h" -#include "bfdlink.h" -#include "libbfd.h" -#include "elf-bfd.h" - -static bfd_reloc_status_type sh_elf_reloc - PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); -static bfd_reloc_status_type sh_elf_ignore_reloc - PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); -static reloc_howto_type *sh_elf_reloc_type_lookup - PARAMS ((bfd *, bfd_reloc_code_real_type)); -static void sh_elf_info_to_howto - PARAMS ((bfd *, arelent *, Elf_Internal_Rela *)); -static boolean sh_elf_relax_section - PARAMS ((bfd *, asection *, struct bfd_link_info *, boolean *)); -static boolean sh_elf_relax_delete_bytes - PARAMS ((bfd *, asection *, bfd_vma, int)); -static boolean sh_elf_align_loads - PARAMS ((bfd *, asection *, Elf_Internal_Rela *, bfd_byte *, boolean *)); -static boolean sh_elf_swap_insns - PARAMS ((bfd *, asection *, PTR, bfd_byte *, bfd_vma)); -static boolean sh_elf_relocate_section - PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *, - Elf_Internal_Rela *, Elf_Internal_Sym *, asection **)); -static bfd_byte *sh_elf_get_relocated_section_contents - PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_order *, - bfd_byte *, boolean, asymbol **)); - -enum sh_reloc_type -{ - R_SH_NONE = 0, - R_SH_DIR32, - R_SH_REL32, - R_SH_DIR8WPN, - R_SH_IND12W, - R_SH_DIR8WPL, - R_SH_DIR8WPZ, - R_SH_DIR8BP, - R_SH_DIR8W, - R_SH_DIR8L, - FIRST_INVALID_RELOC, - LAST_INVALID_RELOC = 24, - /* The remaining relocs are a GNU extension used for relaxation. We - use the same constants as COFF uses, not that it really matters. */ - R_SH_SWITCH16 = 25, - R_SH_SWITCH32, - R_SH_USES, - R_SH_COUNT, - R_SH_ALIGN, - R_SH_CODE, - R_SH_DATA, - R_SH_LABEL, - R_SH_max -}; - -static reloc_howto_type sh_elf_howto_table[] = -{ - /* No relocation. */ - HOWTO (R_SH_NONE, /* type */ - 0, /* rightshift */ - 0, /* size (0 = byte, 1 = short, 2 = long) */ - 0, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_dont, /* complain_on_overflow */ - sh_elf_reloc, /* special_function */ - "R_SH_NONE", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0, /* dst_mask */ - false), /* pcrel_offset */ - - /* 32 bit absolute relocation. Setting partial_inplace to true and - src_mask to a non-zero value is similar to the COFF toolchain. */ - HOWTO (R_SH_DIR32, /* type */ - 0, /* rightshift */ - 2, /* size (0 = byte, 1 = short, 2 = long) */ - 32, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_bitfield, /* complain_on_overflow */ - sh_elf_reloc, /* special_function */ - "R_SH_DIR32", /* name */ - true, /* partial_inplace */ - 0xffffffff, /* src_mask */ - 0xffffffff, /* dst_mask */ - false), /* pcrel_offset */ - - /* 32 bit PC relative relocation. */ - HOWTO (R_SH_REL32, /* type */ - 0, /* rightshift */ - 2, /* size (0 = byte, 1 = short, 2 = long) */ - 32, /* bitsize */ - true, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_signed, /* complain_on_overflow */ - sh_elf_reloc, /* special_function */ - "R_SH_REL32", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0xffffffff, /* dst_mask */ - true), /* pcrel_offset */ - - /* 8 bit PC relative branch divided by 2. */ - HOWTO (R_SH_DIR8WPN, /* type */ - 1, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 8, /* bitsize */ - true, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_signed, /* complain_on_overflow */ - sh_elf_reloc, /* special_function */ - "R_SH_DIR8WPN", /* name */ - true, /* partial_inplace */ - 0xff, /* src_mask */ - 0xff, /* dst_mask */ - true), /* pcrel_offset */ - - /* 12 bit PC relative branch divided by 2. */ - HOWTO (R_SH_IND12W, /* type */ - 1, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 12, /* bitsize */ - true, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_signed, /* complain_on_overflow */ - sh_elf_reloc, /* special_function */ - "R_SH_IND12W", /* name */ - true, /* partial_inplace */ - 0xfff, /* src_mask */ - 0xfff, /* dst_mask */ - true), /* pcrel_offset */ - - /* 8 bit unsigned PC relative divided by 4. */ - HOWTO (R_SH_DIR8WPL, /* type */ - 2, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 8, /* bitsize */ - true, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_reloc, /* special_function */ - "R_SH_DIR8WPL", /* name */ - true, /* partial_inplace */ - 0xff, /* src_mask */ - 0xff, /* dst_mask */ - true), /* pcrel_offset */ - - /* 8 bit unsigned PC relative divided by 2. */ - HOWTO (R_SH_DIR8WPZ, /* type */ - 1, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 8, /* bitsize */ - true, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_reloc, /* special_function */ - "R_SH_DIR8WPZ", /* name */ - true, /* partial_inplace */ - 0xff, /* src_mask */ - 0xff, /* dst_mask */ - true), /* pcrel_offset */ - - /* 8 bit GBR relative. FIXME: This only makes sense if we have some - special symbol for the GBR relative area, and that is not - implemented. */ - HOWTO (R_SH_DIR8BP, /* type */ - 0, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 8, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_reloc, /* special_function */ - "R_SH_DIR8BP", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0xff, /* dst_mask */ - true), /* pcrel_offset */ - - /* 8 bit GBR relative divided by 2. FIXME: This only makes sense if - we have some special symbol for the GBR relative area, and that - is not implemented. */ - HOWTO (R_SH_DIR8W, /* type */ - 1, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 8, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_reloc, /* special_function */ - "R_SH_DIR8W", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0xff, /* dst_mask */ - true), /* pcrel_offset */ - - /* 8 bit GBR relative divided by 4. FIXME: This only makes sense if - we have some special symbol for the GBR relative area, and that - is not implemented. */ - HOWTO (R_SH_DIR8L, /* type */ - 2, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 8, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_reloc, /* special_function */ - "R_SH_DIR8L", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0xff, /* dst_mask */ - true), /* pcrel_offset */ - - { 10 }, - { 11 }, - { 12 }, - { 13 }, - { 14 }, - { 15 }, - { 16 }, - { 17 }, - { 18 }, - { 19 }, - { 20 }, - { 21 }, - { 22 }, - { 23 }, - { 24 }, - - /* The remaining relocs are a GNU extension used for relaxing. The - final pass of the linker never needs to do anything with any of - these relocs. Any required operations are handled by the - relaxation code. */ - - /* A 16 bit switch table entry. This is generated for an expression - such as ``.word L1 - L2''. The offset holds the difference - between the reloc address and L2. */ - HOWTO (R_SH_SWITCH16, /* type */ - 0, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 16, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_ignore_reloc, /* special_function */ - "R_SH_SWITCH16", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0, /* dst_mask */ - true), /* pcrel_offset */ - - /* A 32 bit switch table entry. This is generated for an expression - such as ``.long L1 - L2''. The offset holds the difference - between the reloc address and L2. */ - HOWTO (R_SH_SWITCH32, /* type */ - 0, /* rightshift */ - 2, /* size (0 = byte, 1 = short, 2 = long) */ - 32, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_ignore_reloc, /* special_function */ - "R_SH_SWITCH32", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0, /* dst_mask */ - true), /* pcrel_offset */ - - /* Indicates a .uses pseudo-op. The compiler will generate .uses - pseudo-ops when it finds a function call which can be relaxed. - The offset field holds the PC relative offset to the instruction - which loads the register used in the function call. */ - HOWTO (R_SH_USES, /* type */ - 0, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 0, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_ignore_reloc, /* special_function */ - "R_SH_USES", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0, /* dst_mask */ - true), /* pcrel_offset */ - - /* The assembler will generate this reloc for addresses referred to - by the register loads associated with USES relocs. The offset - field holds the number of times the address is referenced in the - object file. */ - HOWTO (R_SH_COUNT, /* type */ - 0, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 0, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_ignore_reloc, /* special_function */ - "R_SH_COUNT", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0, /* dst_mask */ - true), /* pcrel_offset */ - - /* Indicates an alignment statement. The offset field is the power - of 2 to which subsequent portions of the object file must be - aligned. */ - HOWTO (R_SH_ALIGN, /* type */ - 0, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 0, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_ignore_reloc, /* special_function */ - "R_SH_ALIGN", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0, /* dst_mask */ - true), /* pcrel_offset */ - - /* The assembler will generate this reloc before a block of - instructions. A section should be processed as assumining it - contains data, unless this reloc is seen. */ - HOWTO (R_SH_CODE, /* type */ - 0, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 0, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_ignore_reloc, /* special_function */ - "R_SH_CODE", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0, /* dst_mask */ - true), /* pcrel_offset */ - - /* The assembler will generate this reloc after a block of - instructions when it sees data that is not instructions. */ - HOWTO (R_SH_DATA, /* type */ - 0, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 0, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_ignore_reloc, /* special_function */ - "R_SH_DATA", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0, /* dst_mask */ - true), /* pcrel_offset */ - - /* The assembler generates this reloc for each label within a block - of instructions. This permits the linker to avoid swapping - instructions which are the targets of branches. */ - HOWTO (R_SH_LABEL, /* type */ - 0, /* rightshift */ - 1, /* size (0 = byte, 1 = short, 2 = long) */ - 0, /* bitsize */ - false, /* pc_relative */ - 0, /* bitpos */ - complain_overflow_unsigned, /* complain_on_overflow */ - sh_elf_ignore_reloc, /* special_function */ - "R_SH_LABEL", /* name */ - false, /* partial_inplace */ - 0, /* src_mask */ - 0, /* dst_mask */ - true) /* pcrel_offset */ -}; - -/* This function is used for normal relocs. This is like the COFF - function, and is almost certainly incorrect for other ELF targets. */ - -static bfd_reloc_status_type -sh_elf_reloc (abfd, reloc_entry, symbol_in, data, input_section, output_bfd, - error_message) - bfd *abfd; - arelent *reloc_entry; - asymbol *symbol_in; - PTR data; - asection *input_section; - bfd *output_bfd; - char **error_message; -{ - unsigned long insn; - bfd_vma sym_value; - enum sh_reloc_type r_type; - bfd_vma addr = reloc_entry->address; - bfd_byte *hit_data = addr + (bfd_byte *) data; - - r_type = (enum sh_reloc_type) reloc_entry->howto->type; - - if (output_bfd != NULL) - { - /* Partial linking--do nothing. */ - reloc_entry->address += input_section->output_offset; - return bfd_reloc_ok; - } - - /* Almost all relocs have to do with relaxing. If any work must be - done for them, it has been done in sh_relax_section. */ - if (r_type != R_SH_DIR32 - && (r_type != R_SH_IND12W - || (symbol_in->flags & BSF_LOCAL) != 0)) - return bfd_reloc_ok; - - if (symbol_in != NULL - && bfd_is_und_section (symbol_in->section)) - return bfd_reloc_undefined; - - if (bfd_is_com_section (symbol_in->section)) - sym_value = 0; - else - sym_value = (symbol_in->value + - symbol_in->section->output_section->vma + - symbol_in->section->output_offset); - - switch (r_type) - { - case R_SH_DIR32: - insn = bfd_get_32 (abfd, hit_data); - insn += sym_value + reloc_entry->addend; - bfd_put_32 (abfd, insn, hit_data); - break; - case R_SH_IND12W: - insn = bfd_get_16 (abfd, hit_data); - sym_value += reloc_entry->addend; - sym_value -= (input_section->output_section->vma - + input_section->output_offset - + addr - + 4); - sym_value += (insn & 0xfff) << 1; - if (insn & 0x800) - sym_value -= 0x1000; - insn = (insn & 0xf000) | (sym_value & 0xfff); - bfd_put_16 (abfd, insn, hit_data); - if (sym_value < (bfd_vma) -0x1000 || sym_value >= 0x1000) - return bfd_reloc_overflow; - break; - default: - abort (); - break; - } - - return bfd_reloc_ok; -} - -/* This function is used for relocs which are only used for relaxing, - which the linker should otherwise ignore. */ - -static bfd_reloc_status_type -sh_elf_ignore_reloc (abfd, reloc_entry, symbol, data, input_section, - output_bfd, error_message) - bfd *abfd; - arelent *reloc_entry; - asymbol *symbol; - PTR data; - asection *input_section; - bfd *output_bfd; - char **error_message; -{ - if (output_bfd != NULL) - reloc_entry->address += input_section->output_offset; - return bfd_reloc_ok; -} - -/* This structure is used to map BFD reloc codes to SH ELF relocs. */ - -struct elf_reloc_map -{ - unsigned char bfd_reloc_val; - unsigned char elf_reloc_val; -}; - -/* An array mapping BFD reloc codes to SH ELF relocs. */ - -static const struct elf_reloc_map sh_reloc_map[] = -{ - { BFD_RELOC_NONE, R_SH_NONE }, - { BFD_RELOC_32, R_SH_DIR32 }, - { BFD_RELOC_CTOR, R_SH_DIR32 }, - { BFD_RELOC_32_PCREL, R_SH_REL32 }, - { BFD_RELOC_SH_PCDISP8BY2, R_SH_DIR8WPN }, - { BFD_RELOC_SH_PCDISP12BY2, R_SH_IND12W }, - { BFD_RELOC_SH_PCRELIMM8BY2, R_SH_DIR8WPZ }, - { BFD_RELOC_SH_PCRELIMM8BY4, R_SH_DIR8WPL }, - { BFD_RELOC_SH_SWITCH16, R_SH_SWITCH16 }, - { BFD_RELOC_SH_SWITCH32, R_SH_SWITCH32 }, - { BFD_RELOC_SH_USES, R_SH_USES }, - { BFD_RELOC_SH_COUNT, R_SH_COUNT }, - { BFD_RELOC_SH_ALIGN, R_SH_ALIGN }, - { BFD_RELOC_SH_CODE, R_SH_CODE }, - { BFD_RELOC_SH_DATA, R_SH_DATA }, - { BFD_RELOC_SH_LABEL, R_SH_LABEL } -}; - -/* Given a BFD reloc code, return the howto structure for the - corresponding SH ELf reloc. */ - -static reloc_howto_type * -sh_elf_reloc_type_lookup (abfd, code) - bfd *abfd; - bfd_reloc_code_real_type code; -{ - unsigned int i; - - for (i = 0; i < sizeof (sh_reloc_map) / sizeof (struct elf_reloc_map); i++) - { - if (sh_reloc_map[i].bfd_reloc_val == code) - return &sh_elf_howto_table[(int) sh_reloc_map[i].elf_reloc_val]; - } - - return NULL; -} - -/* Given an ELF reloc, fill in the howto field of a relent. */ - -static void -sh_elf_info_to_howto (abfd, cache_ptr, dst) - bfd *abfd; - arelent *cache_ptr; - Elf_Internal_Rela *dst; -{ - unsigned int r; - - r = ELF32_R_TYPE (dst->r_info); - - BFD_ASSERT (r < (unsigned int) R_SH_max); - BFD_ASSERT (r < FIRST_INVALID_RELOC || r > LAST_INVALID_RELOC); - - cache_ptr->howto = &sh_elf_howto_table[r]; -} - -/* This function handles relaxing for SH ELF. See the corresponding - function in coff-sh.c for a description of what this does. FIXME: - There is a lot of duplication here between this code and the COFF - specific code. The format of relocs and symbols is wound deeply - into this code, but it would still be better if the duplication - could be eliminated somehow. Note in particular that although both - functions use symbols like R_SH_CODE, those symbols have different - values; in coff-sh.c they come from include/coff/sh.h, whereas here - they come from enum sh_reloc_type in this file. */ - -static boolean -sh_elf_relax_section (abfd, sec, link_info, again) - bfd *abfd; - asection *sec; - struct bfd_link_info *link_info; - boolean *again; -{ - Elf_Internal_Shdr *symtab_hdr; - Elf_Internal_Rela *internal_relocs; - Elf_Internal_Rela *free_relocs = NULL; - boolean have_code; - Elf_Internal_Rela *irel, *irelend; - bfd_byte *contents = NULL; - bfd_byte *free_contents = NULL; - Elf32_External_Sym *extsyms = NULL; - Elf32_External_Sym *free_extsyms = NULL; - - *again = false; - - if (link_info->relocateable - || (sec->flags & SEC_RELOC) == 0 - || sec->reloc_count == 0) - return true; - - /* If this is the first time we have been called for this section, - initialize the cooked size. */ - if (sec->_cooked_size == 0) - sec->_cooked_size = sec->_raw_size; - - symtab_hdr = &elf_tdata (abfd)->symtab_hdr; - - internal_relocs = (_bfd_elf32_link_read_relocs - (abfd, sec, (PTR) NULL, (Elf_Internal_Rela *) NULL, - link_info->keep_memory)); - if (internal_relocs == NULL) - goto error_return; - if (! link_info->keep_memory) - free_relocs = internal_relocs; - - have_code = false; - - irelend = internal_relocs + sec->reloc_count; - for (irel = internal_relocs; irel < irelend; irel++) - { - bfd_vma laddr, paddr, symval; - unsigned short insn; - Elf_Internal_Rela *irelfn, *irelscan, *irelcount; - bfd_signed_vma foff; - - if (ELF32_R_TYPE (irel->r_info) == (int) R_SH_CODE) - have_code = true; - - if (ELF32_R_TYPE (irel->r_info) != (int) R_SH_USES) - continue; - - /* Get the section contents. */ - if (contents == NULL) - { - if (elf_section_data (sec)->this_hdr.contents != NULL) - contents = elf_section_data (sec)->this_hdr.contents; - else - { - contents = (bfd_byte *) bfd_malloc (sec->_raw_size); - if (contents == NULL) - goto error_return; - free_contents = contents; - - if (! bfd_get_section_contents (abfd, sec, contents, - (file_ptr) 0, sec->_raw_size)) - goto error_return; - } - } - - /* The r_addend field of the R_SH_USES reloc will point us to - the register load. The 4 is because the r_addend field is - computed as though it were a jump offset, which are based - from 4 bytes after the jump instruction. */ - laddr = irel->r_offset + 4 + irel->r_addend; - if (laddr >= sec->_raw_size) - { - (*_bfd_error_handler) ("%s: 0x%lx: warning: bad R_SH_USES offset", - bfd_get_filename (abfd), - (unsigned long) irel->r_offset); - continue; - } - insn = bfd_get_16 (abfd, contents + laddr); - - /* If the instruction is not mov.l NN,rN, we don't know what to - do. */ - if ((insn & 0xf000) != 0xd000) - { - ((*_bfd_error_handler) - ("%s: 0x%lx: warning: R_SH_USES points to unrecognized insn 0x%x", - bfd_get_filename (abfd), (unsigned long) irel->r_offset, insn)); - continue; - } - - /* Get the address from which the register is being loaded. The - displacement in the mov.l instruction is quadrupled. It is a - displacement from four bytes after the movl instruction, but, - before adding in the PC address, two least significant bits - of the PC are cleared. We assume that the section is aligned - on a four byte boundary. */ - paddr = insn & 0xff; - paddr *= 4; - paddr += (laddr + 4) &~ 3; - if (paddr >= sec->_raw_size) - { - ((*_bfd_error_handler) - ("%s: 0x%lx: warning: bad R_SH_USES load offset", - bfd_get_filename (abfd), (unsigned long) irel->r_offset)); - continue; - } - - /* Get the reloc for the address from which the register is - being loaded. This reloc will tell us which function is - actually being called. */ - for (irelfn = internal_relocs; irelfn < irelend; irelfn++) - if (irelfn->r_offset == paddr - && ELF32_R_TYPE (irelfn->r_info) == (int) R_SH_DIR32) - break; - if (irelfn >= irelend) - { - ((*_bfd_error_handler) - ("%s: 0x%lx: warning: could not find expected reloc", - bfd_get_filename (abfd), (unsigned long) paddr)); - continue; - } - - /* Read this BFD's symbols if we haven't done so already. */ - if (extsyms == NULL) - { - if (symtab_hdr->contents != NULL) - extsyms = (Elf32_External_Sym *) symtab_hdr->contents; - else - { - extsyms = ((Elf32_External_Sym *) - bfd_malloc (symtab_hdr->sh_size)); - if (extsyms == NULL) - goto error_return; - free_extsyms = extsyms; - if (bfd_seek (abfd, symtab_hdr->sh_offset, SEEK_SET) != 0 - || (bfd_read (extsyms, 1, symtab_hdr->sh_size, abfd) - != symtab_hdr->sh_size)) - goto error_return; - } - } - - /* Get the value of the symbol referred to by the reloc. */ - if (ELF32_R_SYM (irelfn->r_info) < symtab_hdr->sh_info) - { - Elf_Internal_Sym isym; - - /* A local symbol. */ - bfd_elf32_swap_symbol_in (abfd, - extsyms + ELF32_R_SYM (irelfn->r_info), - &isym); - - if (isym.st_shndx != _bfd_elf_section_from_bfd_section (abfd, sec)) - { - ((*_bfd_error_handler) - ("%s: 0x%lx: warning: symbol in unexpected section", - bfd_get_filename (abfd), (unsigned long) paddr)); - continue; - } - - symval = (isym.st_value - + sec->output_section->vma - + sec->output_offset); - } - else - { - unsigned long indx; - struct elf_link_hash_entry *h; - - indx = ELF32_R_SYM (irelfn->r_info) - symtab_hdr->sh_info; - h = elf_sym_hashes (abfd)[indx]; - BFD_ASSERT (h != NULL); - if (h->root.type != bfd_link_hash_defined - && h->root.type != bfd_link_hash_defweak) - { - /* This appears to be a reference to an undefined - symbol. Just ignore it--it will be caught by the - regular reloc processing. */ - continue; - } - - symval = (h->root.u.def.value - + h->root.u.def.section->output_section->vma - + h->root.u.def.section->output_offset); - } - - symval += bfd_get_32 (abfd, contents + paddr); - - /* See if this function call can be shortened. */ - foff = (symval - - (irel->r_offset - + sec->output_section->vma - + sec->output_offset - + 4)); - if (foff < -0x1000 || foff >= 0x1000) - { - /* After all that work, we can't shorten this function call. */ - continue; - } - - /* Shorten the function call. */ - - /* For simplicity of coding, we are going to modify the section - contents, the section relocs, and the BFD symbol table. We - must tell the rest of the code not to free up this - information. It would be possible to instead create a table - of changes which have to be made, as is done in coff-mips.c; - that would be more work, but would require less memory when - the linker is run. */ - - elf_section_data (sec)->relocs = internal_relocs; - free_relocs = NULL; - - elf_section_data (sec)->this_hdr.contents = contents; - free_contents = NULL; - - symtab_hdr->contents = (bfd_byte *) extsyms; - free_extsyms = NULL; - - /* Replace the jsr with a bsr. */ - - /* Change the R_SH_USES reloc into an R_SH_IND12W reloc, and - replace the jsr with a bsr. */ - irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irelfn->r_info), R_SH_IND12W); - if (ELF32_R_SYM (irelfn->r_info) < symtab_hdr->sh_info) - { - /* If this needs to be changed because of future relaxing, - it will be handled here like other internal IND12W - relocs. */ - bfd_put_16 (abfd, - 0xb000 | ((foff >> 1) & 0xfff), - contents + irel->r_offset); - } - else - { - /* We can't fully resolve this yet, because the external - symbol value may be changed by future relaxing. We let - the final link phase handle it. */ - bfd_put_16 (abfd, 0xb000, contents + irel->r_offset); - } - - /* See if there is another R_SH_USES reloc referring to the same - register load. */ - for (irelscan = internal_relocs; irelscan < irelend; irelscan++) - if (ELF32_R_TYPE (irelscan->r_info) == (int) R_SH_USES - && laddr == irelscan->r_offset + 4 + irelscan->r_addend) - break; - if (irelscan < irelend) - { - /* Some other function call depends upon this register load, - and we have not yet converted that function call. - Indeed, we may never be able to convert it. There is - nothing else we can do at this point. */ - continue; - } - - /* Look for a R_SH_COUNT reloc on the location where the - function address is stored. Do this before deleting any - bytes, to avoid confusion about the address. */ - for (irelcount = internal_relocs; irelcount < irelend; irelcount++) - if (irelcount->r_offset == paddr - && ELF32_R_TYPE (irelcount->r_info) == (int) R_SH_COUNT) - break; - - /* Delete the register load. */ - if (! sh_elf_relax_delete_bytes (abfd, sec, laddr, 2)) - goto error_return; - - /* That will change things, so, just in case it permits some - other function call to come within range, we should relax - again. Note that this is not required, and it may be slow. */ - *again = true; - - /* Now check whether we got a COUNT reloc. */ - if (irelcount >= irelend) - { - ((*_bfd_error_handler) - ("%s: 0x%lx: warning: could not find expected COUNT reloc", - bfd_get_filename (abfd), (unsigned long) paddr)); - continue; - } - - /* The number of uses is stored in the r_addend field. We've - just deleted one. */ - if (irelcount->r_addend == 0) - { - ((*_bfd_error_handler) ("%s: 0x%lx: warning: bad count", - bfd_get_filename (abfd), - (unsigned long) paddr)); - continue; - } - - --irelcount->r_addend; - - /* If there are no more uses, we can delete the address. Reload - the address from irelfn, in case it was changed by the - previous call to sh_elf_relax_delete_bytes. */ - if (irelcount->r_addend == 0) - { - if (! sh_elf_relax_delete_bytes (abfd, sec, irelfn->r_offset, 4)) - goto error_return; - } - - /* We've done all we can with that function call. */ - } - - /* Look for load and store instructions that we can align on four - byte boundaries. */ - if (have_code) - { - boolean swapped; - - /* Get the section contents. */ - if (contents == NULL) - { - if (elf_section_data (sec)->this_hdr.contents != NULL) - contents = elf_section_data (sec)->this_hdr.contents; - else - { - contents = (bfd_byte *) bfd_malloc (sec->_raw_size); - if (contents == NULL) - goto error_return; - free_contents = contents; - - if (! bfd_get_section_contents (abfd, sec, contents, - (file_ptr) 0, sec->_raw_size)) - goto error_return; - } - } - - if (! sh_elf_align_loads (abfd, sec, internal_relocs, contents, - &swapped)) - goto error_return; - - if (swapped) - { - elf_section_data (sec)->relocs = internal_relocs; - free_relocs = NULL; - - elf_section_data (sec)->this_hdr.contents = contents; - free_contents = NULL; - - symtab_hdr->contents = (bfd_byte *) extsyms; - free_extsyms = NULL; - } - } - - if (free_relocs != NULL) - { - free (free_relocs); - free_relocs = NULL; - } - - if (free_contents != NULL) - { - if (! link_info->keep_memory) - free (free_contents); - else - { - /* Cache the section contents for elf_link_input_bfd. */ - elf_section_data (sec)->this_hdr.contents = contents; - } - free_contents = NULL; - } - - if (free_extsyms != NULL) - { - if (! link_info->keep_memory) - free (free_extsyms); - else - { - /* Cache the symbols for elf_link_input_bfd. */ - symtab_hdr->contents = extsyms; - } - free_extsyms = NULL; - } - - return true; - - error_return: - if (free_relocs != NULL) - free (free_relocs); - if (free_contents != NULL) - free (free_contents); - if (free_extsyms != NULL) - free (free_extsyms); - return false; -} - -/* Delete some bytes from a section while relaxing. FIXME: There is a - lot of duplication between this function and sh_relax_delete_bytes - in coff-sh.c. */ - -static boolean -sh_elf_relax_delete_bytes (abfd, sec, addr, count) - bfd *abfd; - asection *sec; - bfd_vma addr; - int count; -{ - Elf_Internal_Shdr *symtab_hdr; - Elf32_External_Sym *extsyms; - int shndx, index; - bfd_byte *contents; - Elf_Internal_Rela *irel, *irelend; - Elf_Internal_Rela *irelalign; - bfd_vma toaddr; - Elf32_External_Sym *esym, *esymend; - struct elf_link_hash_entry *sym_hash; - asection *o; - - symtab_hdr = &elf_tdata (abfd)->symtab_hdr; - extsyms = (Elf32_External_Sym *) symtab_hdr->contents; - - shndx = _bfd_elf_section_from_bfd_section (abfd, sec); - - contents = elf_section_data (sec)->this_hdr.contents; - - /* The deletion must stop at the next ALIGN reloc for an aligment - power larger than the number of bytes we are deleting. */ - - irelalign = NULL; - toaddr = sec->_cooked_size; - - irel = elf_section_data (sec)->relocs; - irelend = irel + sec->reloc_count; - for (; irel < irelend; irel++) - { - if (ELF32_R_TYPE (irel->r_info) == (int) R_SH_ALIGN - && irel->r_offset > addr - && count < (1 << irel->r_addend)) - { - irelalign = irel; - toaddr = irel->r_offset; - break; - } - } - - /* Actually delete the bytes. */ - memmove (contents + addr, contents + addr + count, toaddr - addr - count); - if (irelalign == NULL) - sec->_cooked_size -= count; - else - { - int i; - -#define NOP_OPCODE (0x0009) - - BFD_ASSERT ((count & 1) == 0); - for (i = 0; i < count; i += 2) - bfd_put_16 (abfd, NOP_OPCODE, contents + toaddr - count + i); - } - - /* Adjust all the relocs. */ - for (irel = elf_section_data (sec)->relocs; irel < irelend; irel++) - { - bfd_vma nraddr, stop; - bfd_vma start = 0; - int insn = 0; - Elf_Internal_Sym sym; - int off, adjust, oinsn; - bfd_signed_vma voff = 0; - boolean overflow; - - /* Get the new reloc address. */ - nraddr = irel->r_offset; - if ((irel->r_offset > addr - && irel->r_offset < toaddr) - || (ELF32_R_TYPE (irel->r_info) == (int) R_SH_ALIGN - && irel->r_offset == toaddr)) - nraddr -= count; - - /* See if this reloc was for the bytes we have deleted, in which - case we no longer care about it. Don't delete relocs which - represent addresses, though. */ - if (irel->r_offset >= addr - && irel->r_offset < addr + count - && ELF32_R_TYPE (irel->r_info) != (int) R_SH_ALIGN - && ELF32_R_TYPE (irel->r_info) != (int) R_SH_CODE - && ELF32_R_TYPE (irel->r_info) != (int) R_SH_DATA - && ELF32_R_TYPE (irel->r_info) != (int) R_SH_LABEL) - irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info), - (int) R_SH_NONE); - - /* If this is a PC relative reloc, see if the range it covers - includes the bytes we have deleted. */ - switch ((enum sh_reloc_type) ELF32_R_TYPE (irel->r_info)) - { - default: - break; - - case R_SH_DIR8WPN: - case R_SH_IND12W: - case R_SH_DIR8WPZ: - case R_SH_DIR8WPL: - start = irel->r_offset; - insn = bfd_get_16 (abfd, contents + nraddr); - break; - } - - switch ((enum sh_reloc_type) ELF32_R_TYPE (irel->r_info)) - { - default: - start = stop = addr; - break; - - case R_SH_DIR32: - /* If this reloc is against a symbol defined in this - section, and the symbol will not be adjusted below, we - must check the addend to see it will put the value in - range to be adjusted, and hence must be changed. */ - if (ELF32_R_SYM (irel->r_info) < symtab_hdr->sh_info) - { - bfd_elf32_swap_symbol_in (abfd, - extsyms + ELF32_R_SYM (irel->r_info), - &sym); - if (sym.st_shndx == shndx - && (sym.st_value <= addr - || sym.st_value >= toaddr)) - { - bfd_vma val; - - val = bfd_get_32 (abfd, contents + nraddr); - val += sym.st_value; - if (val >= addr && val < toaddr) - bfd_put_32 (abfd, val - count, contents + nraddr); - } - } - start = stop = addr; - break; - - case R_SH_DIR8WPN: - off = insn & 0xff; - if (off & 0x80) - off -= 0x100; - stop = (bfd_vma) ((bfd_signed_vma) start + 4 + off * 2); - break; - - case R_SH_IND12W: - if (ELF32_R_SYM (irel->r_info) >= symtab_hdr->sh_info) - start = stop = addr; - else - { - off = insn & 0xfff; - if (off & 0x800) - off -= 0x1000; - stop = (bfd_vma) ((bfd_signed_vma) start + 4 + off * 2); - } - break; - - case R_SH_DIR8WPZ: - off = insn & 0xff; - stop = start + 4 + off * 2; - break; - - case R_SH_DIR8WPL: - off = insn & 0xff; - stop = (start &~ (bfd_vma) 3) + 4 + off * 4; - break; - - case R_SH_SWITCH16: - case R_SH_SWITCH32: - /* These relocs types represent - .word L2-L1 - The r_offset field holds the difference between the reloc - address and L1. That is the start of the reloc, and - adding in the contents gives us the top. We must adjust - both the r_offset field and the section contents. */ - - start = irel->r_offset; - stop = (bfd_vma) ((bfd_signed_vma) start - (long) irel->r_addend); - - if (start > addr - && start < toaddr - && (stop <= addr || stop >= toaddr)) - irel->r_addend += count; - else if (stop > addr - && stop < toaddr - && (start <= addr || start >= toaddr)) - irel->r_addend -= count; - - start = stop; - - if (ELF32_R_TYPE (irel->r_info) == (int) R_SH_SWITCH16) - voff = bfd_get_signed_16 (abfd, contents + nraddr); - else - voff = bfd_get_signed_32 (abfd, contents + nraddr); - stop = (bfd_vma) ((bfd_signed_vma) start + voff); - - break; - - case R_SH_USES: - start = irel->r_offset; - stop = (bfd_vma) ((bfd_signed_vma) start - + (long) irel->r_addend - + 4); - break; - } - - if (start > addr - && start < toaddr - && (stop <= addr || stop >= toaddr)) - adjust = count; - else if (stop > addr - && stop < toaddr - && (start <= addr || start >= toaddr)) - adjust = - count; - else - adjust = 0; - - if (adjust != 0) - { - oinsn = insn; - overflow = false; - switch ((enum sh_reloc_type) ELF32_R_TYPE (irel->r_info)) - { - default: - abort (); - break; - - case R_SH_DIR8WPN: - case R_SH_DIR8WPZ: - insn += adjust / 2; - if ((oinsn & 0xff00) != (insn & 0xff00)) - overflow = true; - bfd_put_16 (abfd, insn, contents + nraddr); - break; - - case R_SH_IND12W: - insn += adjust / 2; - if ((oinsn & 0xf000) != (insn & 0xf000)) - overflow = true; - bfd_put_16 (abfd, insn, contents + nraddr); - break; - - case R_SH_DIR8WPL: - BFD_ASSERT (adjust == count || count >= 4); - if (count >= 4) - insn += adjust / 4; - else - { - if ((irel->r_offset & 3) == 0) - ++insn; - } - if ((oinsn & 0xff00) != (insn & 0xff00)) - overflow = true; - bfd_put_16 (abfd, insn, contents + nraddr); - break; - - case R_SH_SWITCH16: - voff += adjust; - if (voff < - 0x8000 || voff >= 0x8000) - overflow = true; - bfd_put_signed_16 (abfd, voff, contents + nraddr); - break; - - case R_SH_SWITCH32: - voff += adjust; - bfd_put_signed_32 (abfd, voff, contents + nraddr); - break; - - case R_SH_USES: - irel->r_addend += adjust; - break; - } - - if (overflow) - { - ((*_bfd_error_handler) - ("%s: 0x%lx: fatal: reloc overflow while relaxing", - bfd_get_filename (abfd), (unsigned long) irel->r_offset)); - bfd_set_error (bfd_error_bad_value); - return false; - } - } - - irel->r_offset = nraddr; - } - - /* Look through all the other sections. If there contain any IMM32 - relocs against internal symbols which we are not going to adjust - below, we may need to adjust the addends. */ - for (o = abfd->sections; o != NULL; o = o->next) - { - Elf_Internal_Rela *internal_relocs; - Elf_Internal_Rela *irelscan, *irelscanend; - bfd_byte *ocontents; - - if (o == sec - || (o->flags & SEC_RELOC) == 0 - || o->reloc_count == 0) - continue; - - /* We always cache the relocs. Perhaps, if info->keep_memory is - false, we should free them, if we are permitted to, when we - leave sh_coff_relax_section. */ - internal_relocs = (_bfd_elf32_link_read_relocs - (abfd, o, (PTR) NULL, (Elf_Internal_Rela *) NULL, - true)); - if (internal_relocs == NULL) - return false; - - ocontents = NULL; - irelscanend = internal_relocs + o->reloc_count; - for (irelscan = internal_relocs; irelscan < irelscanend; irelscan++) - { - Elf_Internal_Sym sym; - - if (ELF32_R_TYPE (irelscan->r_info) != (int) R_SH_DIR32) - continue; - - if (ELF32_R_SYM (irelscan->r_info) >= symtab_hdr->sh_info) - continue; - - bfd_elf32_swap_symbol_in (abfd, - extsyms + ELF32_R_SYM (irelscan->r_info), - &sym); - - if (sym.st_shndx == shndx - && (sym.st_value <= addr - || sym.st_value >= toaddr)) - { - bfd_vma val; - - if (ocontents == NULL) - { - if (elf_section_data (o)->this_hdr.contents != NULL) - ocontents = elf_section_data (o)->this_hdr.contents; - else - { - /* We always cache the section contents. - Perhaps, if info->keep_memory is false, we - should free them, if we are permitted to, - when we leave sh_coff_relax_section. */ - ocontents = (bfd_byte *) bfd_malloc (o->_raw_size); - if (ocontents == NULL) - return false; - if (! bfd_get_section_contents (abfd, o, ocontents, - (file_ptr) 0, - o->_raw_size)) - return false; - elf_section_data (o)->this_hdr.contents = ocontents; - } - } - - val = bfd_get_32 (abfd, ocontents + irelscan->r_offset); - val += sym.st_value; - if (val >= addr && val < toaddr) - bfd_put_32 (abfd, val - count, - ocontents + irelscan->r_offset); - } - } - } - - /* Adjust the local symbols defined in this section. */ - esym = extsyms; - esymend = esym + symtab_hdr->sh_info; - for (; esym < esymend; esym++) - { - Elf_Internal_Sym isym; - - bfd_elf32_swap_symbol_in (abfd, esym, &isym); - - if (isym.st_shndx == shndx - && isym.st_value > addr - && isym.st_value < toaddr) - { - isym.st_value -= count; - bfd_elf32_swap_symbol_out (abfd, &isym, esym); - } - } - - /* Now adjust the global symbols defined in this section. */ - esym = extsyms + symtab_hdr->sh_info; - esymend = extsyms + (symtab_hdr->sh_size / sizeof (Elf32_External_Sym)); - for (index = 0; esym < esymend; esym++, index++) - { - Elf_Internal_Sym isym; - - bfd_elf32_swap_symbol_in (abfd, esym, &isym); - sym_hash = elf_sym_hashes (abfd)[index]; - if (isym.st_shndx == shndx - && ((sym_hash)->root.type == bfd_link_hash_defined - || (sym_hash)->root.type == bfd_link_hash_defweak) - && (sym_hash)->root.u.def.section == sec - && (sym_hash)->root.u.def.value > addr - && (sym_hash)->root.u.def.value < toaddr) - { - (sym_hash)->root.u.def.value -= count; - } - } - - /* See if we can move the ALIGN reloc forward. We have adjusted - r_offset for it already. */ - if (irelalign != NULL) - { - bfd_vma alignto, alignaddr; - - alignto = BFD_ALIGN (toaddr, 1 << irelalign->r_addend); - alignaddr = BFD_ALIGN (irelalign->r_offset, - 1 << irelalign->r_addend); - if (alignto != alignaddr) - { - /* Tail recursion. */ - return sh_elf_relax_delete_bytes (abfd, sec, alignaddr, - alignto - alignaddr); - } - } - - return true; -} - -/* Look for loads and stores which we can align to four byte - boundaries. This is like sh_align_loads in coff-sh.c. */ - -static boolean -sh_elf_align_loads (abfd, sec, internal_relocs, contents, pswapped) - bfd *abfd; - asection *sec; - Elf_Internal_Rela *internal_relocs; - bfd_byte *contents; - boolean *pswapped; -{ - Elf_Internal_Rela *irel, *irelend; - bfd_vma *labels = NULL; - bfd_vma *label, *label_end; - - *pswapped = false; - - irelend = internal_relocs + sec->reloc_count; - - /* Get all the addresses with labels on them. */ - labels = (bfd_vma *) bfd_malloc (sec->reloc_count * sizeof (bfd_vma)); - if (labels == NULL) - goto error_return; - label_end = labels; - for (irel = internal_relocs; irel < irelend; irel++) - { - if (ELF32_R_TYPE (irel->r_info) == (int) R_SH_LABEL) - { - *label_end = irel->r_offset; - ++label_end; - } - } - - /* Note that the assembler currently always outputs relocs in - address order. If that ever changes, this code will need to sort - the label values and the relocs. */ - - label = labels; - - for (irel = internal_relocs; irel < irelend; irel++) - { - bfd_vma start, stop; - - if (ELF32_R_TYPE (irel->r_info) != (int) R_SH_CODE) - continue; - - start = irel->r_offset; - - for (irel++; irel < irelend; irel++) - if (ELF32_R_TYPE (irel->r_info) == (int) R_SH_DATA) - break; - if (irel < irelend) - stop = irel->r_offset; - else - stop = sec->_cooked_size; - - if (! _bfd_sh_align_load_span (abfd, sec, contents, sh_elf_swap_insns, - (PTR) internal_relocs, &label, - label_end, start, stop, pswapped)) - goto error_return; - } - - free (labels); - - return true; - - error_return: - if (labels != NULL) - free (labels); - return false; -} - -/* Swap two SH instructions. This is like sh_swap_insns in coff-sh.c. */ - -static boolean -sh_elf_swap_insns (abfd, sec, relocs, contents, addr) - bfd *abfd; - asection *sec; - PTR relocs; - bfd_byte *contents; - bfd_vma addr; -{ - Elf_Internal_Rela *internal_relocs = (Elf_Internal_Rela *) relocs; - unsigned short i1, i2; - Elf_Internal_Rela *irel, *irelend; - - /* Swap the instructions themselves. */ - i1 = bfd_get_16 (abfd, contents + addr); - i2 = bfd_get_16 (abfd, contents + addr + 2); - bfd_put_16 (abfd, i2, contents + addr); - bfd_put_16 (abfd, i1, contents + addr + 2); - - /* Adjust all reloc addresses. */ - irelend = internal_relocs + sec->reloc_count; - for (irel = internal_relocs; irel < irelend; irel++) - { - enum sh_reloc_type type; - int add; - - /* There are a few special types of relocs that we don't want to - adjust. These relocs do not apply to the instruction itself, - but are only associated with the address. */ - type = (enum sh_reloc_type) ELF32_R_TYPE (irel->r_info); - if (type == R_SH_ALIGN - || type == R_SH_CODE - || type == R_SH_DATA - || type == R_SH_LABEL) - continue; - - /* If an R_SH_USES reloc points to one of the addresses being - swapped, we must adjust it. It would be incorrect to do this - for a jump, though, since we want to execute both - instructions after the jump. (We have avoided swapping - around a label, so the jump will not wind up executing an - instruction it shouldn't). */ - if (type == R_SH_USES) - { - bfd_vma off; - - off = irel->r_offset + 4 + irel->r_addend; - if (off == addr) - irel->r_offset += 2; - else if (off == addr + 2) - irel->r_offset -= 2; - } - - if (irel->r_offset == addr) - { - irel->r_offset += 2; - add = -2; - } - else if (irel->r_offset == addr + 2) - { - irel->r_offset -= 2; - add = 2; - } - else - add = 0; - - if (add != 0) - { - bfd_byte *loc; - unsigned short insn, oinsn; - boolean overflow; - - loc = contents + irel->r_offset; - overflow = false; - switch (type) - { - default: - break; - - case R_SH_DIR8WPN: - case R_SH_DIR8WPZ: - insn = bfd_get_16 (abfd, loc); - oinsn = insn; - insn += add / 2; - if ((oinsn & 0xff00) != (insn & 0xff00)) - overflow = true; - bfd_put_16 (abfd, insn, loc); - break; - - case R_SH_IND12W: - insn = bfd_get_16 (abfd, loc); - oinsn = insn; - insn += add / 2; - if ((oinsn & 0xf000) != (insn & 0xf000)) - overflow = true; - bfd_put_16 (abfd, insn, loc); - break; - - case R_SH_DIR8WPL: - /* This reloc ignores the least significant 3 bits of - the program counter before adding in the offset. - This means that if ADDR is at an even address, the - swap will not affect the offset. If ADDR is an at an - odd address, then the instruction will be crossing a - four byte boundary, and must be adjusted. */ - if ((addr & 3) != 0) - { - insn = bfd_get_16 (abfd, loc); - oinsn = insn; - insn += add / 2; - if ((oinsn & 0xff00) != (insn & 0xff00)) - overflow = true; - bfd_put_16 (abfd, insn, loc); - } - - break; - } - - if (overflow) - { - ((*_bfd_error_handler) - ("%s: 0x%lx: fatal: reloc overflow while relaxing", - bfd_get_filename (abfd), (unsigned long) irel->r_offset)); - bfd_set_error (bfd_error_bad_value); - return false; - } - } - } - - return true; -} - -/* Relocate an SH ELF section. */ - -static boolean -sh_elf_relocate_section (output_bfd, info, input_bfd, input_section, - contents, relocs, local_syms, local_sections) - bfd *output_bfd; - struct bfd_link_info *info; - bfd *input_bfd; - asection *input_section; - bfd_byte *contents; - Elf_Internal_Rela *relocs; - Elf_Internal_Sym *local_syms; - asection **local_sections; -{ - Elf_Internal_Shdr *symtab_hdr; - struct elf_link_hash_entry **sym_hashes; - Elf_Internal_Rela *rel, *relend; - - symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr; - sym_hashes = elf_sym_hashes (input_bfd); - - rel = relocs; - relend = relocs + input_section->reloc_count; - for (; rel < relend; rel++) - { - int r_type; - reloc_howto_type *howto; - unsigned long r_symndx; - Elf_Internal_Sym *sym; - asection *sec; - struct elf_link_hash_entry *h; - bfd_vma relocation; - bfd_reloc_status_type r; - - r_symndx = ELF32_R_SYM (rel->r_info); - - if (info->relocateable) - { - /* This is a relocateable link. We don't have to change - anything, unless the reloc is against a section symbol, - in which case we have to adjust according to where the - section symbol winds up in the output section. */ - if (r_symndx < symtab_hdr->sh_info) - { - sym = local_syms + r_symndx; - if (ELF_ST_TYPE (sym->st_info) == STT_SECTION) - { - sec = local_sections[r_symndx]; - rel->r_addend += sec->output_offset + sym->st_value; - } - } - - continue; - } - - r_type = ELF32_R_TYPE (rel->r_info); - - /* Many of the relocs are only used for relaxing, and are - handled entirely by the relaxation code. */ - if (r_type > (int) LAST_INVALID_RELOC) - continue; - - if (r_type < 0 - || r_type >= (int) FIRST_INVALID_RELOC) - { - bfd_set_error (bfd_error_bad_value); - return false; - } - - /* FIXME: This is certainly incorrect. However, it is how the - COFF linker works. */ - if (r_type != (int) R_SH_DIR32 - && r_type != (int) R_SH_IND12W) - continue; - - howto = sh_elf_howto_table + r_type; - - /* This is a final link. */ - h = NULL; - sym = NULL; - sec = NULL; - if (r_symndx < symtab_hdr->sh_info) - { - /* There is nothing to be done for an internal IND12W - relocation. FIXME: This is probably wrong, but it's how - the COFF relocations work. */ - if (r_type == (int) R_SH_IND12W) - continue; - sym = local_syms + r_symndx; - sec = local_sections[r_symndx]; - relocation = (sec->output_section->vma - + sec->output_offset - + sym->st_value); - } - else - { - h = sym_hashes[r_symndx - symtab_hdr->sh_info]; - while (h->root.type == bfd_link_hash_indirect - || h->root.type == bfd_link_hash_warning) - h = (struct elf_link_hash_entry *) h->root.u.i.link; - if (h->root.type == bfd_link_hash_defined - || h->root.type == bfd_link_hash_defweak) - { - sec = h->root.u.def.section; - relocation = (h->root.u.def.value - + sec->output_section->vma - + sec->output_offset); - } - else if (h->root.type == bfd_link_hash_undefweak) - relocation = 0; - else - { - if (! ((*info->callbacks->undefined_symbol) - (info, h->root.root.string, input_bfd, - input_section, rel->r_offset))) - return false; - relocation = 0; - } - } - - /* FIXME: This is how the COFF relocations work. */ - if (r_type == (int) R_SH_IND12W) - relocation -= 4; - - /* FIXME: We should use the addend, but the COFF relocations - don't. */ - r = _bfd_final_link_relocate (howto, input_bfd, input_section, - contents, rel->r_offset, - relocation, 0); - - if (r != bfd_reloc_ok) - { - switch (r) - { - default: - case bfd_reloc_outofrange: - abort (); - case bfd_reloc_overflow: - { - const char *name; - - if (h != NULL) - name = h->root.root.string; - else - { - name = (bfd_elf_string_from_elf_section - (input_bfd, symtab_hdr->sh_link, sym->st_name)); - if (name == NULL) - return false; - if (*name == '\0') - name = bfd_section_name (input_bfd, sec); - } - if (! ((*info->callbacks->reloc_overflow) - (info, name, howto->name, (bfd_vma) 0, - input_bfd, input_section, rel->r_offset))) - return false; - } - break; - } - } - } - - return true; -} - -/* This is a version of bfd_generic_get_relocated_section_contents - which uses sh_elf_relocate_section. */ - -static bfd_byte * -sh_elf_get_relocated_section_contents (output_bfd, link_info, link_order, - data, relocateable, symbols) - bfd *output_bfd; - struct bfd_link_info *link_info; - struct bfd_link_order *link_order; - bfd_byte *data; - boolean relocateable; - asymbol **symbols; -{ - Elf_Internal_Shdr *symtab_hdr; - asection *input_section = link_order->u.indirect.section; - bfd *input_bfd = input_section->owner; - asection **sections = NULL; - Elf_Internal_Rela *internal_relocs = NULL; - Elf32_External_Sym *external_syms = NULL; - Elf_Internal_Sym *internal_syms = NULL; - - /* We only need to handle the case of relaxing, or of having a - particular set of section contents, specially. */ - if (relocateable - || elf_section_data (input_section)->this_hdr.contents == NULL) - return bfd_generic_get_relocated_section_contents (output_bfd, link_info, - link_order, data, - relocateable, - symbols); - - symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr; - - memcpy (data, elf_section_data (input_section)->this_hdr.contents, - input_section->_raw_size); - - if ((input_section->flags & SEC_RELOC) != 0 - && input_section->reloc_count > 0) - { - Elf_Internal_Sym *isymp; - asection **secpp; - Elf32_External_Sym *esym, *esymend; - - if (symtab_hdr->contents != NULL) - external_syms = (Elf32_External_Sym *) symtab_hdr->contents; - else - { - external_syms = ((Elf32_External_Sym *) - bfd_malloc (symtab_hdr->sh_info - * sizeof (Elf32_External_Sym))); - if (external_syms == NULL && symtab_hdr->sh_info > 0) - goto error_return; - if (bfd_seek (input_bfd, symtab_hdr->sh_offset, SEEK_SET) != 0 - || (bfd_read (external_syms, sizeof (Elf32_External_Sym), - symtab_hdr->sh_info, input_bfd) - != (symtab_hdr->sh_info * sizeof (Elf32_External_Sym)))) - goto error_return; - } - - internal_relocs = (_bfd_elf32_link_read_relocs - (input_bfd, input_section, (PTR) NULL, - (Elf_Internal_Rela *) NULL, false)); - if (internal_relocs == NULL) - goto error_return; - - internal_syms = ((Elf_Internal_Sym *) - bfd_malloc (symtab_hdr->sh_info - * sizeof (Elf_Internal_Sym))); - if (internal_syms == NULL && symtab_hdr->sh_info > 0) - goto error_return; - - sections = (asection **) bfd_malloc (symtab_hdr->sh_info - * sizeof (asection *)); - if (sections == NULL && symtab_hdr->sh_info > 0) - goto error_return; - - isymp = internal_syms; - secpp = sections; - esym = external_syms; - esymend = esym + symtab_hdr->sh_info; - for (; esym < esymend; ++esym, ++isymp, ++secpp) - { - asection *isec; - - bfd_elf32_swap_symbol_in (input_bfd, esym, isymp); - - if (isymp->st_shndx == SHN_UNDEF) - isec = bfd_und_section_ptr; - else if (isymp->st_shndx > 0 && isymp->st_shndx < SHN_LORESERVE) - isec = bfd_section_from_elf_index (input_bfd, isymp->st_shndx); - else if (isymp->st_shndx == SHN_ABS) - isec = bfd_abs_section_ptr; - else if (isymp->st_shndx == SHN_COMMON) - isec = bfd_com_section_ptr; - else - { - /* Who knows? */ - isec = NULL; - } - - *secpp = isec; - } - - if (! sh_elf_relocate_section (output_bfd, link_info, input_bfd, - input_section, data, internal_relocs, - internal_syms, sections)) - goto error_return; - - if (sections != NULL) - free (sections); - sections = NULL; - if (internal_syms != NULL) - free (internal_syms); - internal_syms = NULL; - if (external_syms != NULL && symtab_hdr->contents == NULL) - free (external_syms); - external_syms = NULL; - if (internal_relocs != elf_section_data (input_section)->relocs) - free (internal_relocs); - internal_relocs = NULL; - } - - return data; - - error_return: - if (internal_relocs != NULL - && internal_relocs != elf_section_data (input_section)->relocs) - free (internal_relocs); - if (external_syms != NULL && symtab_hdr->contents == NULL) - free (external_syms); - if (internal_syms != NULL) - free (internal_syms); - if (sections != NULL) - free (sections); - return NULL; -} - -#define TARGET_BIG_SYM bfd_elf32_sh_vec -#define TARGET_BIG_NAME "elf32-sh" -#define TARGET_LITTLE_SYM bfd_elf32_shl_vec -#define TARGET_LITTLE_NAME "elf32-shl" -#define ELF_ARCH bfd_arch_sh -#define ELF_MACHINE_CODE EM_SH -#define ELF_MAXPAGESIZE 0x1 - -#define elf_symbol_leading_char '_' - -#define bfd_elf32_bfd_reloc_type_lookup sh_elf_reloc_type_lookup -#define elf_info_to_howto sh_elf_info_to_howto -#define bfd_elf32_bfd_relax_section sh_elf_relax_section -#define elf_backend_relocate_section sh_elf_relocate_section -#define bfd_elf32_bfd_get_relocated_section_contents \ - sh_elf_get_relocated_section_contents - -#include "elf32-target.h" |