diff options
Diffstat (limited to 'contrib/gcc/configure.lang')
| -rw-r--r-- | contrib/gcc/configure.lang | 233 |
1 files changed, 0 insertions, 233 deletions
diff --git a/contrib/gcc/configure.lang b/contrib/gcc/configure.lang deleted file mode 100644 index d96b6d8d5314..000000000000 --- a/contrib/gcc/configure.lang +++ /dev/null @@ -1,233 +0,0 @@ -# configure.lang for GNU CC -# This script is run by configure for configuration of language -# subdirectories which conform to the old GCC configure mechanism -# for such subdirectories. - -# Copyright (C) 1997, 1998 Free Software Foundation, Inc. - -#This file is part of GNU CC. - -#GNU CC is free software; you can redistribute it and/or modify -#it under the terms of the GNU General Public License as published by -#the Free Software Foundation; either version 2, or (at your option) -#any later version. - -#GNU CC is distributed in the hope that it will be useful, -#but WITHOUT ANY WARRANTY; without even the implied warranty of -#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#GNU General Public License for more details. - -#You should have received a copy of the GNU General Public License -#along with GNU CC; see the file COPYING. If not, write to -#the Free Software Foundation, 59 Temple Place - Suite 330, -#Boston, MA 02111-1307, USA. - -savesrcdir=$srcdir - -for subdir in . $oldstyle_subdirs -do - # We only want to do this in language subdirs, but we have to handle - # the case of $oldstyle_subdirs = "". - if [ $subdir = . ] - then - continue - fi - - oldsrcdir=$savesrcdir - - # Re-adjust the path - case $oldsrcdir in - /*) - srcdir=$oldsrcdir/$subdir - ;; - *) - oldsrcdir=../${oldsrcdir} - srcdir=$oldsrcdir/$subdir - ;; - esac - mainsrcdir=$oldsrcdir - STARTDIR=`pwd` - test -d $subdir || mkdir $subdir - cd $subdir - - # Create Makefile.tem from Makefile.in. - # Make it set VPATH if necessary so that the sources are found. - # Also change its value of srcdir. - # Also create a .gdbinit file which runs the one in srcdir - # and tells GDB to look there for source files. - case $srcdir in - . | ./$subdir | .././$subdir) - rm -f Makefile.tem - cp Makefile.in Makefile.tem - chmod +w Makefile.tem - ;; - *) - rm -f Makefile.tem - echo "VPATH = ${srcdir}" \ - | cat - ${srcdir}/Makefile.in \ - | sed "s@^srcdir = \.@srcdir = ${srcdir}@" > Makefile.tem - rm -f .gdbinit - echo "dir ." > .gdbinit - echo "dir ${srcdir}" >> .gdbinit - echo "dir ${mainsrcdir}" >> .gdbinit - if [ x$gdb_needs_out_file_path = xyes ] - then - echo "dir ${mainsrcdir}/config/"`dirname ${out_file}` >> .gdbinit - fi - echo "source ${mainsrcdir}/.gdbinit" >> .gdbinit - ;; - esac - - # Conditionalize the makefile for this host machine. - rm -f Makefile.xx Makefile.ll - merged_frags= - for f in .. ${host_xmake_file} - do - if [ -f ${mainsrcdir}/config/$f ] - then - cat ${mainsrcdir}/config/$f >> Makefile.ll - if [ x"${merged_frags}" != x ] - then - merged_frags="${merged_frags} and " - fi - merged_frags="${merged_frags}${f}" - fi - done - if [ x"${merged_frags}" != x ] - then - sed -e "/####host/ r Makefile.ll" Makefile.tem > Makefile.xx - echo "Merged ${merged_frags}." - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - rm -f Makefile.ll - fi - - # Add a definition for MAKE if system wants one. - case "$SET_MAKE" in - ?*) - rm -f Makefile.xx - (echo "$SET_MAKE"; cat Makefile.tem) >Makefile.xx - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - esac - - # Add a definition for INSTALL if system wants one. - # This substitutes for lots of x-* files. - if [ x$build_broken_install = x ] - then true - else - rm -f Makefile.xx - abssrcdir=`cd ${srcdir}; pwd` - sed "s|^INSTALL = .*|${INSTALL}|" Makefile.tem > Makefile.xx - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - fi - - # If using -program-transform-name, override the installation names. - if [ "x${program_transform_set}" = "xyes" ] ; then - sed -e "s/^program_transform_name[ ]*=.*$/program_transform_name = -$program_transform_name/" \ - -e "s/^program_transform_cross_name[ -]*=.*$/program_transform_cross_name = $program_transform_name/" \ - Makefile.tem > Makefile.xx - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - fi - - # Conditionalize the makefile for this target machine. - rm -f Makefile.xx Makefile.ll - merged_frags= - for f in .. ${tmake_file} - do - if [ -f ${mainsrcdir}/config/$f ] - then - cat ${mainsrcdir}/config/$f >> Makefile.ll - if [ x"${merged_frags}" != x ] - then - merged_frags="${merged_frags} and " - fi - merged_frags="${merged_frags}$f" - fi - done - if [ x"${merged_frags}" != x ] - then - sed -e "/####target/ r Makefile.ll" Makefile.tem > Makefile.xx - echo "Merged ${merged_frags}." - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - rm -f Makefile.ll - fi - - # If the host supports - # symlinks, point stage[123] at ../stage[123] so bootstrapping and the - # installation procedure can still use CC="stage1/xgcc -Bstage1/". - # If the host doesn't support symlinks, FLAGS_TO_PASS has been - # modified to solve the problem there. - for t in stage1 stage2 stage3 stage4 include - do - rm -f $t - $symbolic_link ../$t $t 2>/dev/null - done - - # Remove all formfeeds, since some Makes get confused by them. - # Also arrange to give the variables `target', `target_alias', - # `host_xmake_file', `tmake_file', `prefix', `local_prefix', - # `exec_prefix', `INSTALL_HEADERS_DIR', `exeext' - # values in the Makefile from the values they have in this script. - rm -f Makefile.xx - # Create an empty Makefile.sed first, to work around a Nextstep 3.3 bug. - echo 's| ||' > Makefile.sed - rm Makefile.sed - echo 's| ||' > Makefile.sed - echo "s|^target=.*$|target=${target}|" >> Makefile.sed - echo "s|^target_alias=.*$|target_alias=${target_alias}|" >> Makefile.sed - echo "s|^xmake_file=.*$|xmake_file=${dep_host_xmake_file}|" >> Makefile.sed - echo "s|^tmake_file=.*$|tmake_file=${dep_tmake_file}|" >> Makefile.sed - echo "s|^version=.*$|version=${version}|" >> Makefile.sed - echo "s|^GCC_THREAD_FILE=.*$|GCC_THREAD_FILE=${thread_file}|" >> Makefile.sed - echo "s|^prefix[ ]*=.*|prefix = $prefix|" >> Makefile.sed - echo "s|^local_prefix[ ]*=.*|local_prefix = $local_prefix|" >> Makefile.sed - echo "s|^exec_prefix[ ]*=.*|exec_prefix = $exec_prefix|" >> Makefile.sed - echo "s|^INSTALL_HEADERS_DIR[ ]*=.*$|INSTALL_HEADERS_DIR = ${build_install_headers_dir}|" >> Makefile.sed - echo "s|^exeext[ ]*=.*$|exeext = ${build_exeext}|" >> Makefile.sed - sed -f Makefile.sed Makefile.tem > Makefile.xx - rm -f Makefile.tem Makefile.sed - mv Makefile.xx Makefile.tem - - # Install Makefile for real, after making final changes. - # Define macro CROSS_COMPILE in compilation - # if this is a cross-compiler. - # Also use all.cross instead of all.internal - # and add cross-make to Makefile. - if [ x$host != x$target ] - then - rm -f Makefile.xx - echo "CROSS=-DCROSS_COMPILE" > Makefile.xx - sed -e "/####cross/ r ${mainsrcdir}/cross-make" Makefile.tem >> Makefile.xx - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - fi - - # When building gcc with a cross-compiler, we need to fix a few things. - # This must come after cross-make as we want all.build to override - # all.cross. - if [ x$build != x$host ] - then - rm -f Makefile.xx - echo "build= $build" > Makefile.xx - echo "host= $host" >> Makefile.xx - sed -e "s|objc-runtime$||" \ - -e "/####build/ r ${mainsrcdir}/build-make" Makefile.tem >> Makefile.xx - rm -f Makefile.tem - mv Makefile.xx Makefile.tem - fi - - rm -f Makefile - mv Makefile.tem Makefile - echo "Created \`$subdir/Makefile'." - - cd $STARTDIR -done # end of current-dir SUBDIRS loop - -# Restore this, remember we're invoked with `.'. -srcdir=$savesrcdir |