diff options
Diffstat (limited to 'contrib/gcc/real.c')
| -rw-r--r-- | contrib/gcc/real.c | 6862 |
1 files changed, 0 insertions, 6862 deletions
diff --git a/contrib/gcc/real.c b/contrib/gcc/real.c deleted file mode 100644 index a3fda6d4c91a..000000000000 --- a/contrib/gcc/real.c +++ /dev/null @@ -1,6862 +0,0 @@ -/* real.c - implementation of REAL_ARITHMETIC, REAL_VALUE_ATOF, - and support for XFmode IEEE extended real floating point arithmetic. - Copyright (C) 1993, 94-98, 1999 Free Software Foundation, Inc. - Contributed by Stephen L. Moshier (moshier@world.std.com). - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -#include "config.h" -#include "system.h" -#include "tree.h" -#include "toplev.h" - -/* To enable support of XFmode extended real floating point, define -LONG_DOUBLE_TYPE_SIZE 96 in the tm.h file (m68k.h or i386.h). - -To support cross compilation between IEEE, VAX and IBM floating -point formats, define REAL_ARITHMETIC in the tm.h file. - -In either case the machine files (tm.h) must not contain any code -that tries to use host floating point arithmetic to convert -REAL_VALUE_TYPEs from `double' to `float', pass them to fprintf, -etc. In cross-compile situations a REAL_VALUE_TYPE may not -be intelligible to the host computer's native arithmetic. - -The emulator defaults to the host's floating point format so that -its decimal conversion functions can be used if desired (see -real.h). - -The first part of this file interfaces gcc to a floating point -arithmetic suite that was not written with gcc in mind. Avoid -changing the low-level arithmetic routines unless you have suitable -test programs available. A special version of the PARANOIA floating -point arithmetic tester, modified for this purpose, can be found on -usc.edu: /pub/C-numanal/ieeetest.zoo. Other tests, and libraries of -XFmode and TFmode transcendental functions, can be obtained by ftp from -netlib.att.com: netlib/cephes. */ - -/* Type of computer arithmetic. - Only one of DEC, IBM, IEEE, C4X, or UNK should get defined. - - `IEEE', when REAL_WORDS_BIG_ENDIAN is non-zero, refers generically - to big-endian IEEE floating-point data structure. This definition - should work in SFmode `float' type and DFmode `double' type on - virtually all big-endian IEEE machines. If LONG_DOUBLE_TYPE_SIZE - has been defined to be 96, then IEEE also invokes the particular - XFmode (`long double' type) data structure used by the Motorola - 680x0 series processors. - - `IEEE', when REAL_WORDS_BIG_ENDIAN is zero, refers generally to - little-endian IEEE machines. In this case, if LONG_DOUBLE_TYPE_SIZE - has been defined to be 96, then IEEE also invokes the particular - XFmode `long double' data structure used by the Intel 80x86 series - processors. - - `DEC' refers specifically to the Digital Equipment Corp PDP-11 - and VAX floating point data structure. This model currently - supports no type wider than DFmode. - - `IBM' refers specifically to the IBM System/370 and compatible - floating point data structure. This model currently supports - no type wider than DFmode. The IBM conversions were contributed by - frank@atom.ansto.gov.au (Frank Crawford). - - `C4X' refers specifically to the floating point format used on - Texas Instruments TMS320C3x and TMS320C4x digital signal - processors. This supports QFmode (32-bit float, double) and HFmode - (40-bit long double) where BITS_PER_BYTE is 32. Unlike IEEE - floats, C4x floats are not rounded to be even. The C4x conversions - were contributed by m.hayes@elec.canterbury.ac.nz (Michael Hayes) and - Haj.Ten.Brugge@net.HCC.nl (Herman ten Brugge). - - If LONG_DOUBLE_TYPE_SIZE = 64 (the default, unless tm.h defines it) - then `long double' and `double' are both implemented, but they - both mean DFmode. In this case, the software floating-point - support available here is activated by writing - #define REAL_ARITHMETIC - in tm.h. - - The case LONG_DOUBLE_TYPE_SIZE = 128 activates TFmode support - and may deactivate XFmode since `long double' is used to refer - to both modes. - - The macros FLOAT_WORDS_BIG_ENDIAN, HOST_FLOAT_WORDS_BIG_ENDIAN, - contributed by Richard Earnshaw <Richard.Earnshaw@cl.cam.ac.uk>, - separate the floating point unit's endian-ness from that of - the integer addressing. This permits one to define a big-endian - FPU on a little-endian machine (e.g., ARM). An extension to - BYTES_BIG_ENDIAN may be required for some machines in the future. - These optional macros may be defined in tm.h. In real.h, they - default to WORDS_BIG_ENDIAN, etc., so there is no need to define - them for any normal host or target machine on which the floats - and the integers have the same endian-ness. */ - - -/* The following converts gcc macros into the ones used by this file. */ - -/* REAL_ARITHMETIC defined means that macros in real.h are - defined to call emulator functions. */ -#ifdef REAL_ARITHMETIC - -#if TARGET_FLOAT_FORMAT == VAX_FLOAT_FORMAT -/* PDP-11, Pro350, VAX: */ -#define DEC 1 -#else /* it's not VAX */ -#if TARGET_FLOAT_FORMAT == IBM_FLOAT_FORMAT -/* IBM System/370 style */ -#define IBM 1 -#else /* it's also not an IBM */ -#if TARGET_FLOAT_FORMAT == C4X_FLOAT_FORMAT -/* TMS320C3x/C4x style */ -#define C4X 1 -#else /* it's also not a C4X */ -#if TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT -#define IEEE -#else /* it's not IEEE either */ -/* UNKnown arithmetic. We don't support this and can't go on. */ -unknown arithmetic type -#define UNK 1 -#endif /* not IEEE */ -#endif /* not C4X */ -#endif /* not IBM */ -#endif /* not VAX */ - -#define REAL_WORDS_BIG_ENDIAN FLOAT_WORDS_BIG_ENDIAN - -#else -/* REAL_ARITHMETIC not defined means that the *host's* data - structure will be used. It may differ by endian-ness from the - target machine's structure and will get its ends swapped - accordingly (but not here). Probably only the decimal <-> binary - functions in this file will actually be used in this case. */ - -#if HOST_FLOAT_FORMAT == VAX_FLOAT_FORMAT -#define DEC 1 -#else /* it's not VAX */ -#if HOST_FLOAT_FORMAT == IBM_FLOAT_FORMAT -/* IBM System/370 style */ -#define IBM 1 -#else /* it's also not an IBM */ -#if HOST_FLOAT_FORMAT == IEEE_FLOAT_FORMAT -#define IEEE -#else /* it's not IEEE either */ -unknown arithmetic type -#define UNK 1 -#endif /* not IEEE */ -#endif /* not IBM */ -#endif /* not VAX */ - -#define REAL_WORDS_BIG_ENDIAN HOST_FLOAT_WORDS_BIG_ENDIAN - -#endif /* REAL_ARITHMETIC not defined */ - -/* Define INFINITY for support of infinity. - Define NANS for support of Not-a-Number's (NaN's). */ -#if !defined(DEC) && !defined(IBM) && !defined(C4X) -#define INFINITY -#define NANS -#endif - -/* Support of NaNs requires support of infinity. */ -#ifdef NANS -#ifndef INFINITY -#define INFINITY -#endif -#endif - -/* Find a host integer type that is at least 16 bits wide, - and another type at least twice whatever that size is. */ - -#if HOST_BITS_PER_CHAR >= 16 -#define EMUSHORT char -#define EMUSHORT_SIZE HOST_BITS_PER_CHAR -#define EMULONG_SIZE (2 * HOST_BITS_PER_CHAR) -#else -#if HOST_BITS_PER_SHORT >= 16 -#define EMUSHORT short -#define EMUSHORT_SIZE HOST_BITS_PER_SHORT -#define EMULONG_SIZE (2 * HOST_BITS_PER_SHORT) -#else -#if HOST_BITS_PER_INT >= 16 -#define EMUSHORT int -#define EMUSHORT_SIZE HOST_BITS_PER_INT -#define EMULONG_SIZE (2 * HOST_BITS_PER_INT) -#else -#if HOST_BITS_PER_LONG >= 16 -#define EMUSHORT long -#define EMUSHORT_SIZE HOST_BITS_PER_LONG -#define EMULONG_SIZE (2 * HOST_BITS_PER_LONG) -#else -/* You will have to modify this program to have a smaller unit size. */ -#define EMU_NON_COMPILE -#endif -#endif -#endif -#endif - -#if HOST_BITS_PER_SHORT >= EMULONG_SIZE -#define EMULONG short -#else -#if HOST_BITS_PER_INT >= EMULONG_SIZE -#define EMULONG int -#else -#if HOST_BITS_PER_LONG >= EMULONG_SIZE -#define EMULONG long -#else -#if HOST_BITS_PER_LONGLONG >= EMULONG_SIZE -#define EMULONG long long int -#else -/* You will have to modify this program to have a smaller unit size. */ -#define EMU_NON_COMPILE -#endif -#endif -#endif -#endif - - -/* The host interface doesn't work if no 16-bit size exists. */ -#if EMUSHORT_SIZE != 16 -#define EMU_NON_COMPILE -#endif - -/* OK to continue compilation. */ -#ifndef EMU_NON_COMPILE - -/* Construct macros to translate between REAL_VALUE_TYPE and e type. - In GET_REAL and PUT_REAL, r and e are pointers. - A REAL_VALUE_TYPE is guaranteed to occupy contiguous locations - in memory, with no holes. */ - -#if LONG_DOUBLE_TYPE_SIZE == 96 -/* Number of 16 bit words in external e type format */ -#define NE 6 -#define MAXDECEXP 4932 -#define MINDECEXP -4956 -#define GET_REAL(r,e) bcopy ((char *) r, (char *) e, 2*NE) -#define PUT_REAL(e,r) \ -do { \ - if (2*NE < sizeof(*r)) \ - bzero((char *)r, sizeof(*r)); \ - bcopy ((char *) e, (char *) r, 2*NE); \ -} while (0) -#else /* no XFmode */ -#if LONG_DOUBLE_TYPE_SIZE == 128 -#define NE 10 -#define MAXDECEXP 4932 -#define MINDECEXP -4977 -#define GET_REAL(r,e) bcopy ((char *) r, (char *) e, 2*NE) -#define PUT_REAL(e,r) bcopy ((char *) e, (char *) r, 2*NE) -#else -#define NE 6 -#define MAXDECEXP 4932 -#define MINDECEXP -4956 -#ifdef REAL_ARITHMETIC -/* Emulator uses target format internally - but host stores it in host endian-ness. */ - -#define GET_REAL(r,e) \ -do { \ - if (HOST_FLOAT_WORDS_BIG_ENDIAN == REAL_WORDS_BIG_ENDIAN) \ - e53toe ((unsigned EMUSHORT *) (r), (e)); \ - else \ - { \ - unsigned EMUSHORT w[4]; \ - bcopy (((EMUSHORT *) r), &w[3], sizeof (EMUSHORT)); \ - bcopy (((EMUSHORT *) r) + 1, &w[2], sizeof (EMUSHORT)); \ - bcopy (((EMUSHORT *) r) + 2, &w[1], sizeof (EMUSHORT)); \ - bcopy (((EMUSHORT *) r) + 3, &w[0], sizeof (EMUSHORT)); \ - e53toe (w, (e)); \ - } \ - } while (0) - -#define PUT_REAL(e,r) \ -do { \ - if (HOST_FLOAT_WORDS_BIG_ENDIAN == REAL_WORDS_BIG_ENDIAN) \ - etoe53 ((e), (unsigned EMUSHORT *) (r)); \ - else \ - { \ - unsigned EMUSHORT w[4]; \ - etoe53 ((e), w); \ - bcopy (&w[3], ((EMUSHORT *) r), sizeof (EMUSHORT)); \ - bcopy (&w[2], ((EMUSHORT *) r) + 1, sizeof (EMUSHORT)); \ - bcopy (&w[1], ((EMUSHORT *) r) + 2, sizeof (EMUSHORT)); \ - bcopy (&w[0], ((EMUSHORT *) r) + 3, sizeof (EMUSHORT)); \ - } \ - } while (0) - -#else /* not REAL_ARITHMETIC */ - -/* emulator uses host format */ -#define GET_REAL(r,e) e53toe ((unsigned EMUSHORT *) (r), (e)) -#define PUT_REAL(e,r) etoe53 ((e), (unsigned EMUSHORT *) (r)) - -#endif /* not REAL_ARITHMETIC */ -#endif /* not TFmode */ -#endif /* not XFmode */ - - -/* Number of 16 bit words in internal format */ -#define NI (NE+3) - -/* Array offset to exponent */ -#define E 1 - -/* Array offset to high guard word */ -#define M 2 - -/* Number of bits of precision */ -#define NBITS ((NI-4)*16) - -/* Maximum number of decimal digits in ASCII conversion - * = NBITS*log10(2) - */ -#define NDEC (NBITS*8/27) - -/* The exponent of 1.0 */ -#define EXONE (0x3fff) - -extern int extra_warnings; -extern unsigned EMUSHORT ezero[], ehalf[], eone[], etwo[]; -extern unsigned EMUSHORT elog2[], esqrt2[]; - -static void endian PROTO((unsigned EMUSHORT *, long *, - enum machine_mode)); -static void eclear PROTO((unsigned EMUSHORT *)); -static void emov PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -#if 0 -static void eabs PROTO((unsigned EMUSHORT *)); -#endif -static void eneg PROTO((unsigned EMUSHORT *)); -static int eisneg PROTO((unsigned EMUSHORT *)); -static int eisinf PROTO((unsigned EMUSHORT *)); -static int eisnan PROTO((unsigned EMUSHORT *)); -static void einfin PROTO((unsigned EMUSHORT *)); -static void enan PROTO((unsigned EMUSHORT *, int)); -static void emovi PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void emovo PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void ecleaz PROTO((unsigned EMUSHORT *)); -static void ecleazs PROTO((unsigned EMUSHORT *)); -static void emovz PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void einan PROTO((unsigned EMUSHORT *)); -static int eiisnan PROTO((unsigned EMUSHORT *)); -static int eiisneg PROTO((unsigned EMUSHORT *)); -#if 0 -static void eiinfin PROTO((unsigned EMUSHORT *)); -#endif -static int eiisinf PROTO((unsigned EMUSHORT *)); -static int ecmpm PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void eshdn1 PROTO((unsigned EMUSHORT *)); -static void eshup1 PROTO((unsigned EMUSHORT *)); -static void eshdn8 PROTO((unsigned EMUSHORT *)); -static void eshup8 PROTO((unsigned EMUSHORT *)); -static void eshup6 PROTO((unsigned EMUSHORT *)); -static void eshdn6 PROTO((unsigned EMUSHORT *)); -static void eaddm PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void esubm PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void m16m PROTO((unsigned int, unsigned short *, - unsigned short *)); -static int edivm PROTO((unsigned short *, unsigned short *)); -static int emulm PROTO((unsigned short *, unsigned short *)); -static void emdnorm PROTO((unsigned EMUSHORT *, int, int, EMULONG, int)); -static void esub PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *, - unsigned EMUSHORT *)); -static void eadd PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *, - unsigned EMUSHORT *)); -static void eadd1 PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *, - unsigned EMUSHORT *)); -static void ediv PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *, - unsigned EMUSHORT *)); -static void emul PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *, - unsigned EMUSHORT *)); -static void e53toe PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void e64toe PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void e113toe PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void e24toe PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void etoe113 PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void toe113 PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void etoe64 PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void toe64 PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void etoe53 PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void toe53 PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void etoe24 PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void toe24 PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static int ecmp PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -#if 0 -static void eround PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -#endif -static void ltoe PROTO((HOST_WIDE_INT *, unsigned EMUSHORT *)); -static void ultoe PROTO((unsigned HOST_WIDE_INT *, unsigned EMUSHORT *)); -static void eifrac PROTO((unsigned EMUSHORT *, HOST_WIDE_INT *, - unsigned EMUSHORT *)); -static void euifrac PROTO((unsigned EMUSHORT *, unsigned HOST_WIDE_INT *, - unsigned EMUSHORT *)); -static int eshift PROTO((unsigned EMUSHORT *, int)); -static int enormlz PROTO((unsigned EMUSHORT *)); -#if 0 -static void e24toasc PROTO((unsigned EMUSHORT *, char *, int)); -static void e53toasc PROTO((unsigned EMUSHORT *, char *, int)); -static void e64toasc PROTO((unsigned EMUSHORT *, char *, int)); -static void e113toasc PROTO((unsigned EMUSHORT *, char *, int)); -#endif /* 0 */ -static void etoasc PROTO((unsigned EMUSHORT *, char *, int)); -static void asctoe24 PROTO((const char *, unsigned EMUSHORT *)); -static void asctoe53 PROTO((const char *, unsigned EMUSHORT *)); -static void asctoe64 PROTO((const char *, unsigned EMUSHORT *)); -static void asctoe113 PROTO((const char *, unsigned EMUSHORT *)); -static void asctoe PROTO((const char *, unsigned EMUSHORT *)); -static void asctoeg PROTO((const char *, unsigned EMUSHORT *, int)); -static void efloor PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -#if 0 -static void efrexp PROTO((unsigned EMUSHORT *, int *, - unsigned EMUSHORT *)); -#endif -static void eldexp PROTO((unsigned EMUSHORT *, int, unsigned EMUSHORT *)); -#if 0 -static void eremain PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *, - unsigned EMUSHORT *)); -#endif -static void eiremain PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void mtherr PROTO((const char *, int)); -#ifdef DEC -static void dectoe PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void etodec PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void todec PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -#endif -#ifdef IBM -static void ibmtoe PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *, - enum machine_mode)); -static void etoibm PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *, - enum machine_mode)); -static void toibm PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *, - enum machine_mode)); -#endif -#ifdef C4X -static void c4xtoe PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *, - enum machine_mode)); -static void etoc4x PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *, - enum machine_mode)); -static void toc4x PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *, - enum machine_mode)); -#endif -static void make_nan PROTO((unsigned EMUSHORT *, int, enum machine_mode)); -#if 0 -static void uditoe PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void ditoe PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void etoudi PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void etodi PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -static void esqrt PROTO((unsigned EMUSHORT *, unsigned EMUSHORT *)); -#endif - -/* Copy 32-bit numbers obtained from array containing 16-bit numbers, - swapping ends if required, into output array of longs. The - result is normally passed to fprintf by the ASM_OUTPUT_ macros. */ - -static void -endian (e, x, mode) - unsigned EMUSHORT e[]; - long x[]; - enum machine_mode mode; -{ - unsigned long th, t; - - if (REAL_WORDS_BIG_ENDIAN) - { - switch (mode) - { - case TFmode: - /* Swap halfwords in the fourth long. */ - th = (unsigned long) e[6] & 0xffff; - t = (unsigned long) e[7] & 0xffff; - t |= th << 16; - x[3] = (long) t; - - case XFmode: - /* Swap halfwords in the third long. */ - th = (unsigned long) e[4] & 0xffff; - t = (unsigned long) e[5] & 0xffff; - t |= th << 16; - x[2] = (long) t; - /* fall into the double case */ - - case DFmode: - /* Swap halfwords in the second word. */ - th = (unsigned long) e[2] & 0xffff; - t = (unsigned long) e[3] & 0xffff; - t |= th << 16; - x[1] = (long) t; - /* fall into the float case */ - - case SFmode: - case HFmode: - /* Swap halfwords in the first word. */ - th = (unsigned long) e[0] & 0xffff; - t = (unsigned long) e[1] & 0xffff; - t |= th << 16; - x[0] = (long) t; - break; - - default: - abort (); - } - } - else - { - /* Pack the output array without swapping. */ - - switch (mode) - { - case TFmode: - /* Pack the fourth long. */ - th = (unsigned long) e[7] & 0xffff; - t = (unsigned long) e[6] & 0xffff; - t |= th << 16; - x[3] = (long) t; - - case XFmode: - /* Pack the third long. - Each element of the input REAL_VALUE_TYPE array has 16 useful bits - in it. */ - th = (unsigned long) e[5] & 0xffff; - t = (unsigned long) e[4] & 0xffff; - t |= th << 16; - x[2] = (long) t; - /* fall into the double case */ - - case DFmode: - /* Pack the second long */ - th = (unsigned long) e[3] & 0xffff; - t = (unsigned long) e[2] & 0xffff; - t |= th << 16; - x[1] = (long) t; - /* fall into the float case */ - - case SFmode: - case HFmode: - /* Pack the first long */ - th = (unsigned long) e[1] & 0xffff; - t = (unsigned long) e[0] & 0xffff; - t |= th << 16; - x[0] = (long) t; - break; - - default: - abort (); - } - } -} - - -/* This is the implementation of the REAL_ARITHMETIC macro. */ - -void -earith (value, icode, r1, r2) - REAL_VALUE_TYPE *value; - int icode; - REAL_VALUE_TYPE *r1; - REAL_VALUE_TYPE *r2; -{ - unsigned EMUSHORT d1[NE], d2[NE], v[NE]; - enum tree_code code; - - GET_REAL (r1, d1); - GET_REAL (r2, d2); -#ifdef NANS -/* Return NaN input back to the caller. */ - if (eisnan (d1)) - { - PUT_REAL (d1, value); - return; - } - if (eisnan (d2)) - { - PUT_REAL (d2, value); - return; - } -#endif - code = (enum tree_code) icode; - switch (code) - { - case PLUS_EXPR: - eadd (d2, d1, v); - break; - - case MINUS_EXPR: - esub (d2, d1, v); /* d1 - d2 */ - break; - - case MULT_EXPR: - emul (d2, d1, v); - break; - - case RDIV_EXPR: -#ifndef REAL_INFINITY - if (ecmp (d2, ezero) == 0) - { -#ifdef NANS - enan (v, eisneg (d1) ^ eisneg (d2)); - break; -#else - abort (); -#endif - } -#endif - ediv (d2, d1, v); /* d1/d2 */ - break; - - case MIN_EXPR: /* min (d1,d2) */ - if (ecmp (d1, d2) < 0) - emov (d1, v); - else - emov (d2, v); - break; - - case MAX_EXPR: /* max (d1,d2) */ - if (ecmp (d1, d2) > 0) - emov (d1, v); - else - emov (d2, v); - break; - default: - emov (ezero, v); - break; - } -PUT_REAL (v, value); -} - - -/* Truncate REAL_VALUE_TYPE toward zero to signed HOST_WIDE_INT. - implements REAL_VALUE_RNDZINT (x) (etrunci (x)). */ - -REAL_VALUE_TYPE -etrunci (x) - REAL_VALUE_TYPE x; -{ - unsigned EMUSHORT f[NE], g[NE]; - REAL_VALUE_TYPE r; - HOST_WIDE_INT l; - - GET_REAL (&x, g); -#ifdef NANS - if (eisnan (g)) - return (x); -#endif - eifrac (g, &l, f); - ltoe (&l, g); - PUT_REAL (g, &r); - return (r); -} - - -/* Truncate REAL_VALUE_TYPE toward zero to unsigned HOST_WIDE_INT; - implements REAL_VALUE_UNSIGNED_RNDZINT (x) (etruncui (x)). */ - -REAL_VALUE_TYPE -etruncui (x) - REAL_VALUE_TYPE x; -{ - unsigned EMUSHORT f[NE], g[NE]; - REAL_VALUE_TYPE r; - unsigned HOST_WIDE_INT l; - - GET_REAL (&x, g); -#ifdef NANS - if (eisnan (g)) - return (x); -#endif - euifrac (g, &l, f); - ultoe (&l, g); - PUT_REAL (g, &r); - return (r); -} - - -/* This is the REAL_VALUE_ATOF function. It converts a decimal or hexadecimal - string to binary, rounding off as indicated by the machine_mode argument. - Then it promotes the rounded value to REAL_VALUE_TYPE. */ - -REAL_VALUE_TYPE -ereal_atof (s, t) - const char *s; - enum machine_mode t; -{ - unsigned EMUSHORT tem[NE], e[NE]; - REAL_VALUE_TYPE r; - - switch (t) - { -#ifdef C4X - case QFmode: - case HFmode: - asctoe53 (s, tem); - e53toe (tem, e); - break; -#else - case HFmode: -#endif - - case SFmode: - asctoe24 (s, tem); - e24toe (tem, e); - break; - - case DFmode: - asctoe53 (s, tem); - e53toe (tem, e); - break; - - case XFmode: - asctoe64 (s, tem); - e64toe (tem, e); - break; - - case TFmode: - asctoe113 (s, tem); - e113toe (tem, e); - break; - - default: - asctoe (s, e); - } - PUT_REAL (e, &r); - return (r); -} - - -/* Expansion of REAL_NEGATE. */ - -REAL_VALUE_TYPE -ereal_negate (x) - REAL_VALUE_TYPE x; -{ - unsigned EMUSHORT e[NE]; - REAL_VALUE_TYPE r; - - GET_REAL (&x, e); - eneg (e); - PUT_REAL (e, &r); - return (r); -} - - -/* Round real toward zero to HOST_WIDE_INT; - implements REAL_VALUE_FIX (x). */ - -HOST_WIDE_INT -efixi (x) - REAL_VALUE_TYPE x; -{ - unsigned EMUSHORT f[NE], g[NE]; - HOST_WIDE_INT l; - - GET_REAL (&x, f); -#ifdef NANS - if (eisnan (f)) - { - warning ("conversion from NaN to int"); - return (-1); - } -#endif - eifrac (f, &l, g); - return l; -} - -/* Round real toward zero to unsigned HOST_WIDE_INT - implements REAL_VALUE_UNSIGNED_FIX (x). - Negative input returns zero. */ - -unsigned HOST_WIDE_INT -efixui (x) - REAL_VALUE_TYPE x; -{ - unsigned EMUSHORT f[NE], g[NE]; - unsigned HOST_WIDE_INT l; - - GET_REAL (&x, f); -#ifdef NANS - if (eisnan (f)) - { - warning ("conversion from NaN to unsigned int"); - return (-1); - } -#endif - euifrac (f, &l, g); - return l; -} - - -/* REAL_VALUE_FROM_INT macro. */ - -void -ereal_from_int (d, i, j, mode) - REAL_VALUE_TYPE *d; - HOST_WIDE_INT i, j; - enum machine_mode mode; -{ - unsigned EMUSHORT df[NE], dg[NE]; - HOST_WIDE_INT low, high; - int sign; - - if (GET_MODE_CLASS (mode) != MODE_FLOAT) - abort (); - sign = 0; - low = i; - if ((high = j) < 0) - { - sign = 1; - /* complement and add 1 */ - high = ~high; - if (low) - low = -low; - else - high += 1; - } - eldexp (eone, HOST_BITS_PER_WIDE_INT, df); - ultoe ((unsigned HOST_WIDE_INT *) &high, dg); - emul (dg, df, dg); - ultoe ((unsigned HOST_WIDE_INT *) &low, df); - eadd (df, dg, dg); - if (sign) - eneg (dg); - - /* A REAL_VALUE_TYPE may not be wide enough to hold the two HOST_WIDE_INTS. - Avoid double-rounding errors later by rounding off now from the - extra-wide internal format to the requested precision. */ - switch (GET_MODE_BITSIZE (mode)) - { - case 32: - etoe24 (dg, df); - e24toe (df, dg); - break; - - case 64: - etoe53 (dg, df); - e53toe (df, dg); - break; - - case 96: - etoe64 (dg, df); - e64toe (df, dg); - break; - - case 128: - etoe113 (dg, df); - e113toe (df, dg); - break; - - default: - abort (); - } - - PUT_REAL (dg, d); -} - - -/* REAL_VALUE_FROM_UNSIGNED_INT macro. */ - -void -ereal_from_uint (d, i, j, mode) - REAL_VALUE_TYPE *d; - unsigned HOST_WIDE_INT i, j; - enum machine_mode mode; -{ - unsigned EMUSHORT df[NE], dg[NE]; - unsigned HOST_WIDE_INT low, high; - - if (GET_MODE_CLASS (mode) != MODE_FLOAT) - abort (); - low = i; - high = j; - eldexp (eone, HOST_BITS_PER_WIDE_INT, df); - ultoe (&high, dg); - emul (dg, df, dg); - ultoe (&low, df); - eadd (df, dg, dg); - - /* A REAL_VALUE_TYPE may not be wide enough to hold the two HOST_WIDE_INTS. - Avoid double-rounding errors later by rounding off now from the - extra-wide internal format to the requested precision. */ - switch (GET_MODE_BITSIZE (mode)) - { - case 32: - etoe24 (dg, df); - e24toe (df, dg); - break; - - case 64: - etoe53 (dg, df); - e53toe (df, dg); - break; - - case 96: - etoe64 (dg, df); - e64toe (df, dg); - break; - - case 128: - etoe113 (dg, df); - e113toe (df, dg); - break; - - default: - abort (); - } - - PUT_REAL (dg, d); -} - - -/* REAL_VALUE_TO_INT macro. */ - -void -ereal_to_int (low, high, rr) - HOST_WIDE_INT *low, *high; - REAL_VALUE_TYPE rr; -{ - unsigned EMUSHORT d[NE], df[NE], dg[NE], dh[NE]; - int s; - - GET_REAL (&rr, d); -#ifdef NANS - if (eisnan (d)) - { - warning ("conversion from NaN to int"); - *low = -1; - *high = -1; - return; - } -#endif - /* convert positive value */ - s = 0; - if (eisneg (d)) - { - eneg (d); - s = 1; - } - eldexp (eone, HOST_BITS_PER_WIDE_INT, df); - ediv (df, d, dg); /* dg = d / 2^32 is the high word */ - euifrac (dg, (unsigned HOST_WIDE_INT *) high, dh); - emul (df, dh, dg); /* fractional part is the low word */ - euifrac (dg, (unsigned HOST_WIDE_INT *)low, dh); - if (s) - { - /* complement and add 1 */ - *high = ~(*high); - if (*low) - *low = -(*low); - else - *high += 1; - } -} - - -/* REAL_VALUE_LDEXP macro. */ - -REAL_VALUE_TYPE -ereal_ldexp (x, n) - REAL_VALUE_TYPE x; - int n; -{ - unsigned EMUSHORT e[NE], y[NE]; - REAL_VALUE_TYPE r; - - GET_REAL (&x, e); -#ifdef NANS - if (eisnan (e)) - return (x); -#endif - eldexp (e, n, y); - PUT_REAL (y, &r); - return (r); -} - -/* These routines are conditionally compiled because functions - of the same names may be defined in fold-const.c. */ - -#ifdef REAL_ARITHMETIC - -/* Check for infinity in a REAL_VALUE_TYPE. */ - -int -target_isinf (x) - REAL_VALUE_TYPE x; -{ - unsigned EMUSHORT e[NE]; - -#ifdef INFINITY - GET_REAL (&x, e); - return (eisinf (e)); -#else - return 0; -#endif -} - -/* Check whether a REAL_VALUE_TYPE item is a NaN. */ - -int -target_isnan (x) - REAL_VALUE_TYPE x; -{ - unsigned EMUSHORT e[NE]; - -#ifdef NANS - GET_REAL (&x, e); - return (eisnan (e)); -#else - return (0); -#endif -} - - -/* Check for a negative REAL_VALUE_TYPE number. - This just checks the sign bit, so that -0 counts as negative. */ - -int -target_negative (x) - REAL_VALUE_TYPE x; -{ - return ereal_isneg (x); -} - -/* Expansion of REAL_VALUE_TRUNCATE. - The result is in floating point, rounded to nearest or even. */ - -REAL_VALUE_TYPE -real_value_truncate (mode, arg) - enum machine_mode mode; - REAL_VALUE_TYPE arg; -{ - unsigned EMUSHORT e[NE], t[NE]; - REAL_VALUE_TYPE r; - - GET_REAL (&arg, e); -#ifdef NANS - if (eisnan (e)) - return (arg); -#endif - eclear (t); - switch (mode) - { - case TFmode: - etoe113 (e, t); - e113toe (t, t); - break; - - case XFmode: - etoe64 (e, t); - e64toe (t, t); - break; - - case DFmode: - etoe53 (e, t); - e53toe (t, t); - break; - - case SFmode: -#ifndef C4X - case HFmode: -#endif - etoe24 (e, t); - e24toe (t, t); - break; - -#ifdef C4X - case HFmode: - case QFmode: - etoe53 (e, t); - e53toe (t, t); - break; -#endif - - case SImode: - r = etrunci (arg); - return (r); - - /* If an unsupported type was requested, presume that - the machine files know something useful to do with - the unmodified value. */ - - default: - return (arg); - } - PUT_REAL (t, &r); - return (r); -} - -/* Try to change R into its exact multiplicative inverse in machine mode - MODE. Return nonzero function value if successful. */ - -int -exact_real_inverse (mode, r) - enum machine_mode mode; - REAL_VALUE_TYPE *r; -{ - unsigned EMUSHORT e[NE], einv[NE]; - REAL_VALUE_TYPE rinv; - int i; - - GET_REAL (r, e); - - /* Test for input in range. Don't transform IEEE special values. */ - if (eisinf (e) || eisnan (e) || (ecmp (e, ezero) == 0)) - return 0; - - /* Test for a power of 2: all significand bits zero except the MSB. - We are assuming the target has binary (or hex) arithmetic. */ - if (e[NE - 2] != 0x8000) - return 0; - - for (i = 0; i < NE - 2; i++) - { - if (e[i] != 0) - return 0; - } - - /* Compute the inverse and truncate it to the required mode. */ - ediv (e, eone, einv); - PUT_REAL (einv, &rinv); - rinv = real_value_truncate (mode, rinv); - -#ifdef CHECK_FLOAT_VALUE - /* This check is not redundant. It may, for example, flush - a supposedly IEEE denormal value to zero. */ - i = 0; - if (CHECK_FLOAT_VALUE (mode, rinv, i)) - return 0; -#endif - GET_REAL (&rinv, einv); - - /* Check the bits again, because the truncation might have - generated an arbitrary saturation value on overflow. */ - if (einv[NE - 2] != 0x8000) - return 0; - - for (i = 0; i < NE - 2; i++) - { - if (einv[i] != 0) - return 0; - } - - /* Fail if the computed inverse is out of range. */ - if (eisinf (einv) || eisnan (einv) || (ecmp (einv, ezero) == 0)) - return 0; - - /* Output the reciprocal and return success flag. */ - PUT_REAL (einv, r); - return 1; -} -#endif /* REAL_ARITHMETIC defined */ - -/* Used for debugging--print the value of R in human-readable format - on stderr. */ - -void -debug_real (r) - REAL_VALUE_TYPE r; -{ - char dstr[30]; - - REAL_VALUE_TO_DECIMAL (r, "%.20g", dstr); - fprintf (stderr, "%s", dstr); -} - - -/* The following routines convert REAL_VALUE_TYPE to the various floating - point formats that are meaningful to supported computers. - - The results are returned in 32-bit pieces, each piece stored in a `long'. - This is so they can be printed by statements like - - fprintf (file, "%lx, %lx", L[0], L[1]); - - that will work on both narrow- and wide-word host computers. */ - -/* Convert R to a 128-bit long double precision value. The output array L - contains four 32-bit pieces of the result, in the order they would appear - in memory. */ - -void -etartdouble (r, l) - REAL_VALUE_TYPE r; - long l[]; -{ - unsigned EMUSHORT e[NE]; - - GET_REAL (&r, e); - etoe113 (e, e); - endian (e, l, TFmode); -} - -/* Convert R to a double extended precision value. The output array L - contains three 32-bit pieces of the result, in the order they would - appear in memory. */ - -void -etarldouble (r, l) - REAL_VALUE_TYPE r; - long l[]; -{ - unsigned EMUSHORT e[NE]; - - GET_REAL (&r, e); - etoe64 (e, e); - endian (e, l, XFmode); -} - -/* Convert R to a double precision value. The output array L contains two - 32-bit pieces of the result, in the order they would appear in memory. */ - -void -etardouble (r, l) - REAL_VALUE_TYPE r; - long l[]; -{ - unsigned EMUSHORT e[NE]; - - GET_REAL (&r, e); - etoe53 (e, e); - endian (e, l, DFmode); -} - -/* Convert R to a single precision float value stored in the least-significant - bits of a `long'. */ - -long -etarsingle (r) - REAL_VALUE_TYPE r; -{ - unsigned EMUSHORT e[NE]; - long l; - - GET_REAL (&r, e); - etoe24 (e, e); - endian (e, &l, SFmode); - return ((long) l); -} - -/* Convert X to a decimal ASCII string S for output to an assembly - language file. Note, there is no standard way to spell infinity or - a NaN, so these values may require special treatment in the tm.h - macros. */ - -void -ereal_to_decimal (x, s) - REAL_VALUE_TYPE x; - char *s; -{ - unsigned EMUSHORT e[NE]; - - GET_REAL (&x, e); - etoasc (e, s, 20); -} - -/* Compare X and Y. Return 1 if X > Y, 0 if X == Y, -1 if X < Y, - or -2 if either is a NaN. */ - -int -ereal_cmp (x, y) - REAL_VALUE_TYPE x, y; -{ - unsigned EMUSHORT ex[NE], ey[NE]; - - GET_REAL (&x, ex); - GET_REAL (&y, ey); - return (ecmp (ex, ey)); -} - -/* Return 1 if the sign bit of X is set, else return 0. */ - -int -ereal_isneg (x) - REAL_VALUE_TYPE x; -{ - unsigned EMUSHORT ex[NE]; - - GET_REAL (&x, ex); - return (eisneg (ex)); -} - -/* End of REAL_ARITHMETIC interface */ - -/* - Extended precision IEEE binary floating point arithmetic routines - - Numbers are stored in C language as arrays of 16-bit unsigned - short integers. The arguments of the routines are pointers to - the arrays. - - External e type data structure, similar to Intel 8087 chip - temporary real format but possibly with a larger significand: - - NE-1 significand words (least significant word first, - most significant bit is normally set) - exponent (value = EXONE for 1.0, - top bit is the sign) - - - Internal exploded e-type data structure of a number (a "word" is 16 bits): - - ei[0] sign word (0 for positive, 0xffff for negative) - ei[1] biased exponent (value = EXONE for the number 1.0) - ei[2] high guard word (always zero after normalization) - ei[3] - to ei[NI-2] significand (NI-4 significand words, - most significant word first, - most significant bit is set) - ei[NI-1] low guard word (0x8000 bit is rounding place) - - - - Routines for external format e-type numbers - - asctoe (string, e) ASCII string to extended double e type - asctoe64 (string, &d) ASCII string to long double - asctoe53 (string, &d) ASCII string to double - asctoe24 (string, &f) ASCII string to single - asctoeg (string, e, prec) ASCII string to specified precision - e24toe (&f, e) IEEE single precision to e type - e53toe (&d, e) IEEE double precision to e type - e64toe (&d, e) IEEE long double precision to e type - e113toe (&d, e) 128-bit long double precision to e type -#if 0 - eabs (e) absolute value -#endif - eadd (a, b, c) c = b + a - eclear (e) e = 0 - ecmp (a, b) Returns 1 if a > b, 0 if a == b, - -1 if a < b, -2 if either a or b is a NaN. - ediv (a, b, c) c = b / a - efloor (a, b) truncate to integer, toward -infinity - efrexp (a, exp, s) extract exponent and significand - eifrac (e, &l, frac) e to HOST_WIDE_INT and e type fraction - euifrac (e, &l, frac) e to unsigned HOST_WIDE_INT and e type fraction - einfin (e) set e to infinity, leaving its sign alone - eldexp (a, n, b) multiply by 2**n - emov (a, b) b = a - emul (a, b, c) c = b * a - eneg (e) e = -e -#if 0 - eround (a, b) b = nearest integer value to a -#endif - esub (a, b, c) c = b - a -#if 0 - e24toasc (&f, str, n) single to ASCII string, n digits after decimal - e53toasc (&d, str, n) double to ASCII string, n digits after decimal - e64toasc (&d, str, n) 80-bit long double to ASCII string - e113toasc (&d, str, n) 128-bit long double to ASCII string -#endif - etoasc (e, str, n) e to ASCII string, n digits after decimal - etoe24 (e, &f) convert e type to IEEE single precision - etoe53 (e, &d) convert e type to IEEE double precision - etoe64 (e, &d) convert e type to IEEE long double precision - ltoe (&l, e) HOST_WIDE_INT to e type - ultoe (&l, e) unsigned HOST_WIDE_INT to e type - eisneg (e) 1 if sign bit of e != 0, else 0 - eisinf (e) 1 if e has maximum exponent (non-IEEE) - or is infinite (IEEE) - eisnan (e) 1 if e is a NaN - - - Routines for internal format exploded e-type numbers - - eaddm (ai, bi) add significands, bi = bi + ai - ecleaz (ei) ei = 0 - ecleazs (ei) set ei = 0 but leave its sign alone - ecmpm (ai, bi) compare significands, return 1, 0, or -1 - edivm (ai, bi) divide significands, bi = bi / ai - emdnorm (ai,l,s,exp) normalize and round off - emovi (a, ai) convert external a to internal ai - emovo (ai, a) convert internal ai to external a - emovz (ai, bi) bi = ai, low guard word of bi = 0 - emulm (ai, bi) multiply significands, bi = bi * ai - enormlz (ei) left-justify the significand - eshdn1 (ai) shift significand and guards down 1 bit - eshdn8 (ai) shift down 8 bits - eshdn6 (ai) shift down 16 bits - eshift (ai, n) shift ai n bits up (or down if n < 0) - eshup1 (ai) shift significand and guards up 1 bit - eshup8 (ai) shift up 8 bits - eshup6 (ai) shift up 16 bits - esubm (ai, bi) subtract significands, bi = bi - ai - eiisinf (ai) 1 if infinite - eiisnan (ai) 1 if a NaN - eiisneg (ai) 1 if sign bit of ai != 0, else 0 - einan (ai) set ai = NaN -#if 0 - eiinfin (ai) set ai = infinity -#endif - - The result is always normalized and rounded to NI-4 word precision - after each arithmetic operation. - - Exception flags are NOT fully supported. - - Signaling NaN's are NOT supported; they are treated the same - as quiet NaN's. - - Define INFINITY for support of infinity; otherwise a - saturation arithmetic is implemented. - - Define NANS for support of Not-a-Number items; otherwise the - arithmetic will never produce a NaN output, and might be confused - by a NaN input. - If NaN's are supported, the output of `ecmp (a,b)' is -2 if - either a or b is a NaN. This means asking `if (ecmp (a,b) < 0)' - may not be legitimate. Use `if (ecmp (a,b) == -1)' for `less than' - if in doubt. - - Denormals are always supported here where appropriate (e.g., not - for conversion to DEC numbers). */ - -/* Definitions for error codes that are passed to the common error handling - routine mtherr. - - For Digital Equipment PDP-11 and VAX computers, certain - IBM systems, and others that use numbers with a 56-bit - significand, the symbol DEC should be defined. In this - mode, most floating point constants are given as arrays - of octal integers to eliminate decimal to binary conversion - errors that might be introduced by the compiler. - - For computers, such as IBM PC, that follow the IEEE - Standard for Binary Floating Point Arithmetic (ANSI/IEEE - Std 754-1985), the symbol IEEE should be defined. - These numbers have 53-bit significands. In this mode, constants - are provided as arrays of hexadecimal 16 bit integers. - The endian-ness of generated values is controlled by - REAL_WORDS_BIG_ENDIAN. - - To accommodate other types of computer arithmetic, all - constants are also provided in a normal decimal radix - which one can hope are correctly converted to a suitable - format by the available C language compiler. To invoke - this mode, the symbol UNK is defined. - - An important difference among these modes is a predefined - set of machine arithmetic constants for each. The numbers - MACHEP (the machine roundoff error), MAXNUM (largest number - represented), and several other parameters are preset by - the configuration symbol. Check the file const.c to - ensure that these values are correct for your computer. - - For ANSI C compatibility, define ANSIC equal to 1. Currently - this affects only the atan2 function and others that use it. */ - -/* Constant definitions for math error conditions. */ - -#define DOMAIN 1 /* argument domain error */ -#define SING 2 /* argument singularity */ -#define OVERFLOW 3 /* overflow range error */ -#define UNDERFLOW 4 /* underflow range error */ -#define TLOSS 5 /* total loss of precision */ -#define PLOSS 6 /* partial loss of precision */ -#define INVALID 7 /* NaN-producing operation */ - -/* e type constants used by high precision check routines */ - -#if LONG_DOUBLE_TYPE_SIZE == 128 -/* 0.0 */ -unsigned EMUSHORT ezero[NE] = - {0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,}; -extern unsigned EMUSHORT ezero[]; - -/* 5.0E-1 */ -unsigned EMUSHORT ehalf[NE] = - {0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x8000, 0x3ffe,}; -extern unsigned EMUSHORT ehalf[]; - -/* 1.0E0 */ -unsigned EMUSHORT eone[NE] = - {0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x8000, 0x3fff,}; -extern unsigned EMUSHORT eone[]; - -/* 2.0E0 */ -unsigned EMUSHORT etwo[NE] = - {0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x8000, 0x4000,}; -extern unsigned EMUSHORT etwo[]; - -/* 3.2E1 */ -unsigned EMUSHORT e32[NE] = - {0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x8000, 0x4004,}; -extern unsigned EMUSHORT e32[]; - -/* 6.93147180559945309417232121458176568075500134360255E-1 */ -unsigned EMUSHORT elog2[NE] = - {0x40f3, 0xf6af, 0x03f2, 0xb398, - 0xc9e3, 0x79ab, 0150717, 0013767, 0130562, 0x3ffe,}; -extern unsigned EMUSHORT elog2[]; - -/* 1.41421356237309504880168872420969807856967187537695E0 */ -unsigned EMUSHORT esqrt2[NE] = - {0x1d6f, 0xbe9f, 0x754a, 0x89b3, - 0x597d, 0x6484, 0174736, 0171463, 0132404, 0x3fff,}; -extern unsigned EMUSHORT esqrt2[]; - -/* 3.14159265358979323846264338327950288419716939937511E0 */ -unsigned EMUSHORT epi[NE] = - {0x2902, 0x1cd1, 0x80dc, 0x628b, - 0xc4c6, 0xc234, 0020550, 0155242, 0144417, 0040000,}; -extern unsigned EMUSHORT epi[]; - -#else -/* LONG_DOUBLE_TYPE_SIZE is other than 128 */ -unsigned EMUSHORT ezero[NE] = - {0, 0000000, 0000000, 0000000, 0000000, 0000000,}; -unsigned EMUSHORT ehalf[NE] = - {0, 0000000, 0000000, 0000000, 0100000, 0x3ffe,}; -unsigned EMUSHORT eone[NE] = - {0, 0000000, 0000000, 0000000, 0100000, 0x3fff,}; -unsigned EMUSHORT etwo[NE] = - {0, 0000000, 0000000, 0000000, 0100000, 0040000,}; -unsigned EMUSHORT e32[NE] = - {0, 0000000, 0000000, 0000000, 0100000, 0040004,}; -unsigned EMUSHORT elog2[NE] = - {0xc9e4, 0x79ab, 0150717, 0013767, 0130562, 0x3ffe,}; -unsigned EMUSHORT esqrt2[NE] = - {0x597e, 0x6484, 0174736, 0171463, 0132404, 0x3fff,}; -unsigned EMUSHORT epi[NE] = - {0xc4c6, 0xc234, 0020550, 0155242, 0144417, 0040000,}; -#endif - -/* Control register for rounding precision. - This can be set to 113 (if NE=10), 80 (if NE=6), 64, 56, 53, or 24 bits. */ - -int rndprc = NBITS; -extern int rndprc; - -/* Clear out entire e-type number X. */ - -static void -eclear (x) - register unsigned EMUSHORT *x; -{ - register int i; - - for (i = 0; i < NE; i++) - *x++ = 0; -} - -/* Move e-type number from A to B. */ - -static void -emov (a, b) - register unsigned EMUSHORT *a, *b; -{ - register int i; - - for (i = 0; i < NE; i++) - *b++ = *a++; -} - - -#if 0 -/* Absolute value of e-type X. */ - -static void -eabs (x) - unsigned EMUSHORT x[]; -{ - /* sign is top bit of last word of external format */ - x[NE - 1] &= 0x7fff; -} -#endif /* 0 */ - -/* Negate the e-type number X. */ - -static void -eneg (x) - unsigned EMUSHORT x[]; -{ - - x[NE - 1] ^= 0x8000; /* Toggle the sign bit */ -} - -/* Return 1 if sign bit of e-type number X is nonzero, else zero. */ - -static int -eisneg (x) - unsigned EMUSHORT x[]; -{ - - if (x[NE - 1] & 0x8000) - return (1); - else - return (0); -} - -/* Return 1 if e-type number X is infinity, else return zero. */ - -static int -eisinf (x) - unsigned EMUSHORT x[]; -{ - -#ifdef NANS - if (eisnan (x)) - return (0); -#endif - if ((x[NE - 1] & 0x7fff) == 0x7fff) - return (1); - else - return (0); -} - -/* Check if e-type number is not a number. The bit pattern is one that we - defined, so we know for sure how to detect it. */ - -static int -eisnan (x) - unsigned EMUSHORT x[]; -{ -#ifdef NANS - int i; - - /* NaN has maximum exponent */ - if ((x[NE - 1] & 0x7fff) != 0x7fff) - return (0); - /* ... and non-zero significand field. */ - for (i = 0; i < NE - 1; i++) - { - if (*x++ != 0) - return (1); - } -#endif - - return (0); -} - -/* Fill e-type number X with infinity pattern (IEEE) - or largest possible number (non-IEEE). */ - -static void -einfin (x) - register unsigned EMUSHORT *x; -{ - register int i; - -#ifdef INFINITY - for (i = 0; i < NE - 1; i++) - *x++ = 0; - *x |= 32767; -#else - for (i = 0; i < NE - 1; i++) - *x++ = 0xffff; - *x |= 32766; - if (rndprc < NBITS) - { - if (rndprc == 113) - { - *(x - 9) = 0; - *(x - 8) = 0; - } - if (rndprc == 64) - { - *(x - 5) = 0; - } - if (rndprc == 53) - { - *(x - 4) = 0xf800; - } - else - { - *(x - 4) = 0; - *(x - 3) = 0; - *(x - 2) = 0xff00; - } - } -#endif -} - -/* Output an e-type NaN. - This generates Intel's quiet NaN pattern for extended real. - The exponent is 7fff, the leading mantissa word is c000. */ - -static void -enan (x, sign) - register unsigned EMUSHORT *x; - int sign; -{ - register int i; - - for (i = 0; i < NE - 2; i++) - *x++ = 0; - *x++ = 0xc000; - *x = (sign << 15) | 0x7fff; -} - -/* Move in an e-type number A, converting it to exploded e-type B. */ - -static void -emovi (a, b) - unsigned EMUSHORT *a, *b; -{ - register unsigned EMUSHORT *p, *q; - int i; - - q = b; - p = a + (NE - 1); /* point to last word of external number */ - /* get the sign bit */ - if (*p & 0x8000) - *q++ = 0xffff; - else - *q++ = 0; - /* get the exponent */ - *q = *p--; - *q++ &= 0x7fff; /* delete the sign bit */ -#ifdef INFINITY - if ((*(q - 1) & 0x7fff) == 0x7fff) - { -#ifdef NANS - if (eisnan (a)) - { - *q++ = 0; - for (i = 3; i < NI; i++) - *q++ = *p--; - return; - } -#endif - - for (i = 2; i < NI; i++) - *q++ = 0; - return; - } -#endif - - /* clear high guard word */ - *q++ = 0; - /* move in the significand */ - for (i = 0; i < NE - 1; i++) - *q++ = *p--; - /* clear low guard word */ - *q = 0; -} - -/* Move out exploded e-type number A, converting it to e type B. */ - -static void -emovo (a, b) - unsigned EMUSHORT *a, *b; -{ - register unsigned EMUSHORT *p, *q; - unsigned EMUSHORT i; - int j; - - p = a; - q = b + (NE - 1); /* point to output exponent */ - /* combine sign and exponent */ - i = *p++; - if (i) - *q-- = *p++ | 0x8000; - else - *q-- = *p++; -#ifdef INFINITY - if (*(p - 1) == 0x7fff) - { -#ifdef NANS - if (eiisnan (a)) - { - enan (b, eiisneg (a)); - return; - } -#endif - einfin (b); - return; - } -#endif - /* skip over guard word */ - ++p; - /* move the significand */ - for (j = 0; j < NE - 1; j++) - *q-- = *p++; -} - -/* Clear out exploded e-type number XI. */ - -static void -ecleaz (xi) - register unsigned EMUSHORT *xi; -{ - register int i; - - for (i = 0; i < NI; i++) - *xi++ = 0; -} - -/* Clear out exploded e-type XI, but don't touch the sign. */ - -static void -ecleazs (xi) - register unsigned EMUSHORT *xi; -{ - register int i; - - ++xi; - for (i = 0; i < NI - 1; i++) - *xi++ = 0; -} - -/* Move exploded e-type number from A to B. */ - -static void -emovz (a, b) - register unsigned EMUSHORT *a, *b; -{ - register int i; - - for (i = 0; i < NI - 1; i++) - *b++ = *a++; - /* clear low guard word */ - *b = 0; -} - -/* Generate exploded e-type NaN. - The explicit pattern for this is maximum exponent and - top two significant bits set. */ - -static void -einan (x) - unsigned EMUSHORT x[]; -{ - - ecleaz (x); - x[E] = 0x7fff; - x[M + 1] = 0xc000; -} - -/* Return nonzero if exploded e-type X is a NaN. */ - -static int -eiisnan (x) - unsigned EMUSHORT x[]; -{ - int i; - - if ((x[E] & 0x7fff) == 0x7fff) - { - for (i = M + 1; i < NI; i++) - { - if (x[i] != 0) - return (1); - } - } - return (0); -} - -/* Return nonzero if sign of exploded e-type X is nonzero. */ - -static int -eiisneg (x) - unsigned EMUSHORT x[]; -{ - - return x[0] != 0; -} - -#if 0 -/* Fill exploded e-type X with infinity pattern. - This has maximum exponent and significand all zeros. */ - -static void -eiinfin (x) - unsigned EMUSHORT x[]; -{ - - ecleaz (x); - x[E] = 0x7fff; -} -#endif /* 0 */ - -/* Return nonzero if exploded e-type X is infinite. */ - -static int -eiisinf (x) - unsigned EMUSHORT x[]; -{ - -#ifdef NANS - if (eiisnan (x)) - return (0); -#endif - if ((x[E] & 0x7fff) == 0x7fff) - return (1); - return (0); -} - - -/* Compare significands of numbers in internal exploded e-type format. - Guard words are included in the comparison. - - Returns +1 if a > b - 0 if a == b - -1 if a < b */ - -static int -ecmpm (a, b) - register unsigned EMUSHORT *a, *b; -{ - int i; - - a += M; /* skip up to significand area */ - b += M; - for (i = M; i < NI; i++) - { - if (*a++ != *b++) - goto difrnt; - } - return (0); - - difrnt: - if (*(--a) > *(--b)) - return (1); - else - return (-1); -} - -/* Shift significand of exploded e-type X down by 1 bit. */ - -static void -eshdn1 (x) - register unsigned EMUSHORT *x; -{ - register unsigned EMUSHORT bits; - int i; - - x += M; /* point to significand area */ - - bits = 0; - for (i = M; i < NI; i++) - { - if (*x & 1) - bits |= 1; - *x >>= 1; - if (bits & 2) - *x |= 0x8000; - bits <<= 1; - ++x; - } -} - -/* Shift significand of exploded e-type X up by 1 bit. */ - -static void -eshup1 (x) - register unsigned EMUSHORT *x; -{ - register unsigned EMUSHORT bits; - int i; - - x += NI - 1; - bits = 0; - - for (i = M; i < NI; i++) - { - if (*x & 0x8000) - bits |= 1; - *x <<= 1; - if (bits & 2) - *x |= 1; - bits <<= 1; - --x; - } -} - - -/* Shift significand of exploded e-type X down by 8 bits. */ - -static void -eshdn8 (x) - register unsigned EMUSHORT *x; -{ - register unsigned EMUSHORT newbyt, oldbyt; - int i; - - x += M; - oldbyt = 0; - for (i = M; i < NI; i++) - { - newbyt = *x << 8; - *x >>= 8; - *x |= oldbyt; - oldbyt = newbyt; - ++x; - } -} - -/* Shift significand of exploded e-type X up by 8 bits. */ - -static void -eshup8 (x) - register unsigned EMUSHORT *x; -{ - int i; - register unsigned EMUSHORT newbyt, oldbyt; - - x += NI - 1; - oldbyt = 0; - - for (i = M; i < NI; i++) - { - newbyt = *x >> 8; - *x <<= 8; - *x |= oldbyt; - oldbyt = newbyt; - --x; - } -} - -/* Shift significand of exploded e-type X up by 16 bits. */ - -static void -eshup6 (x) - register unsigned EMUSHORT *x; -{ - int i; - register unsigned EMUSHORT *p; - - p = x + M; - x += M + 1; - - for (i = M; i < NI - 1; i++) - *p++ = *x++; - - *p = 0; -} - -/* Shift significand of exploded e-type X down by 16 bits. */ - -static void -eshdn6 (x) - register unsigned EMUSHORT *x; -{ - int i; - register unsigned EMUSHORT *p; - - x += NI - 1; - p = x + 1; - - for (i = M; i < NI - 1; i++) - *(--p) = *(--x); - - *(--p) = 0; -} - -/* Add significands of exploded e-type X and Y. X + Y replaces Y. */ - -static void -eaddm (x, y) - unsigned EMUSHORT *x, *y; -{ - register unsigned EMULONG a; - int i; - unsigned int carry; - - x += NI - 1; - y += NI - 1; - carry = 0; - for (i = M; i < NI; i++) - { - a = (unsigned EMULONG) (*x) + (unsigned EMULONG) (*y) + carry; - if (a & 0x10000) - carry = 1; - else - carry = 0; - *y = (unsigned EMUSHORT) a; - --x; - --y; - } -} - -/* Subtract significands of exploded e-type X and Y. Y - X replaces Y. */ - -static void -esubm (x, y) - unsigned EMUSHORT *x, *y; -{ - unsigned EMULONG a; - int i; - unsigned int carry; - - x += NI - 1; - y += NI - 1; - carry = 0; - for (i = M; i < NI; i++) - { - a = (unsigned EMULONG) (*y) - (unsigned EMULONG) (*x) - carry; - if (a & 0x10000) - carry = 1; - else - carry = 0; - *y = (unsigned EMUSHORT) a; - --x; - --y; - } -} - - -static unsigned EMUSHORT equot[NI]; - - -#if 0 -/* Radix 2 shift-and-add versions of multiply and divide */ - - -/* Divide significands */ - -int -edivm (den, num) - unsigned EMUSHORT den[], num[]; -{ - int i; - register unsigned EMUSHORT *p, *q; - unsigned EMUSHORT j; - - p = &equot[0]; - *p++ = num[0]; - *p++ = num[1]; - - for (i = M; i < NI; i++) - { - *p++ = 0; - } - - /* Use faster compare and subtraction if denominator has only 15 bits of - significance. */ - - p = &den[M + 2]; - if (*p++ == 0) - { - for (i = M + 3; i < NI; i++) - { - if (*p++ != 0) - goto fulldiv; - } - if ((den[M + 1] & 1) != 0) - goto fulldiv; - eshdn1 (num); - eshdn1 (den); - - p = &den[M + 1]; - q = &num[M + 1]; - - for (i = 0; i < NBITS + 2; i++) - { - if (*p <= *q) - { - *q -= *p; - j = 1; - } - else - { - j = 0; - } - eshup1 (equot); - equot[NI - 2] |= j; - eshup1 (num); - } - goto divdon; - } - - /* The number of quotient bits to calculate is NBITS + 1 scaling guard - bit + 1 roundoff bit. */ - - fulldiv: - - p = &equot[NI - 2]; - for (i = 0; i < NBITS + 2; i++) - { - if (ecmpm (den, num) <= 0) - { - esubm (den, num); - j = 1; /* quotient bit = 1 */ - } - else - j = 0; - eshup1 (equot); - *p |= j; - eshup1 (num); - } - - divdon: - - eshdn1 (equot); - eshdn1 (equot); - - /* test for nonzero remainder after roundoff bit */ - p = &num[M]; - j = 0; - for (i = M; i < NI; i++) - { - j |= *p++; - } - if (j) - j = 1; - - - for (i = 0; i < NI; i++) - num[i] = equot[i]; - return ((int) j); -} - - -/* Multiply significands */ - -int -emulm (a, b) - unsigned EMUSHORT a[], b[]; -{ - unsigned EMUSHORT *p, *q; - int i, j, k; - - equot[0] = b[0]; - equot[1] = b[1]; - for (i = M; i < NI; i++) - equot[i] = 0; - - p = &a[NI - 2]; - k = NBITS; - while (*p == 0) /* significand is not supposed to be zero */ - { - eshdn6 (a); - k -= 16; - } - if ((*p & 0xff) == 0) - { - eshdn8 (a); - k -= 8; - } - - q = &equot[NI - 1]; - j = 0; - for (i = 0; i < k; i++) - { - if (*p & 1) - eaddm (b, equot); - /* remember if there were any nonzero bits shifted out */ - if (*q & 1) - j |= 1; - eshdn1 (a); - eshdn1 (equot); - } - - for (i = 0; i < NI; i++) - b[i] = equot[i]; - - /* return flag for lost nonzero bits */ - return (j); -} - -#else - -/* Radix 65536 versions of multiply and divide. */ - -/* Multiply significand of e-type number B - by 16-bit quantity A, return e-type result to C. */ - -static void -m16m (a, b, c) - unsigned int a; - unsigned EMUSHORT b[], c[]; -{ - register unsigned EMUSHORT *pp; - register unsigned EMULONG carry; - unsigned EMUSHORT *ps; - unsigned EMUSHORT p[NI]; - unsigned EMULONG aa, m; - int i; - - aa = a; - pp = &p[NI-2]; - *pp++ = 0; - *pp = 0; - ps = &b[NI-1]; - - for (i=M+1; i<NI; i++) - { - if (*ps == 0) - { - --ps; - --pp; - *(pp-1) = 0; - } - else - { - m = (unsigned EMULONG) aa * *ps--; - carry = (m & 0xffff) + *pp; - *pp-- = (unsigned EMUSHORT)carry; - carry = (carry >> 16) + (m >> 16) + *pp; - *pp = (unsigned EMUSHORT)carry; - *(pp-1) = carry >> 16; - } - } - for (i=M; i<NI; i++) - c[i] = p[i]; -} - -/* Divide significands of exploded e-types NUM / DEN. Neither the - numerator NUM nor the denominator DEN is permitted to have its high guard - word nonzero. */ - -static int -edivm (den, num) - unsigned EMUSHORT den[], num[]; -{ - int i; - register unsigned EMUSHORT *p; - unsigned EMULONG tnum; - unsigned EMUSHORT j, tdenm, tquot; - unsigned EMUSHORT tprod[NI+1]; - - p = &equot[0]; - *p++ = num[0]; - *p++ = num[1]; - - for (i=M; i<NI; i++) - { - *p++ = 0; - } - eshdn1 (num); - tdenm = den[M+1]; - for (i=M; i<NI; i++) - { - /* Find trial quotient digit (the radix is 65536). */ - tnum = (((unsigned EMULONG) num[M]) << 16) + num[M+1]; - - /* Do not execute the divide instruction if it will overflow. */ - if ((tdenm * (unsigned long)0xffff) < tnum) - tquot = 0xffff; - else - tquot = tnum / tdenm; - /* Multiply denominator by trial quotient digit. */ - m16m ((unsigned int)tquot, den, tprod); - /* The quotient digit may have been overestimated. */ - if (ecmpm (tprod, num) > 0) - { - tquot -= 1; - esubm (den, tprod); - if (ecmpm (tprod, num) > 0) - { - tquot -= 1; - esubm (den, tprod); - } - } - esubm (tprod, num); - equot[i] = tquot; - eshup6(num); - } - /* test for nonzero remainder after roundoff bit */ - p = &num[M]; - j = 0; - for (i=M; i<NI; i++) - { - j |= *p++; - } - if (j) - j = 1; - - for (i=0; i<NI; i++) - num[i] = equot[i]; - - return ((int)j); -} - -/* Multiply significands of exploded e-type A and B, result in B. */ - -static int -emulm (a, b) - unsigned EMUSHORT a[], b[]; -{ - unsigned EMUSHORT *p, *q; - unsigned EMUSHORT pprod[NI]; - unsigned EMUSHORT j; - int i; - - equot[0] = b[0]; - equot[1] = b[1]; - for (i=M; i<NI; i++) - equot[i] = 0; - - j = 0; - p = &a[NI-1]; - q = &equot[NI-1]; - for (i=M+1; i<NI; i++) - { - if (*p == 0) - { - --p; - } - else - { - m16m ((unsigned int) *p--, b, pprod); - eaddm(pprod, equot); - } - j |= *q; - eshdn6(equot); - } - - for (i=0; i<NI; i++) - b[i] = equot[i]; - - /* return flag for lost nonzero bits */ - return ((int)j); -} -#endif - - -/* Normalize and round off. - - The internal format number to be rounded is S. - Input LOST is 0 if the value is exact. This is the so-called sticky bit. - - Input SUBFLG indicates whether the number was obtained - by a subtraction operation. In that case if LOST is nonzero - then the number is slightly smaller than indicated. - - Input EXP is the biased exponent, which may be negative. - the exponent field of S is ignored but is replaced by - EXP as adjusted by normalization and rounding. - - Input RCNTRL is the rounding control. If it is nonzero, the - returned value will be rounded to RNDPRC bits. - - For future reference: In order for emdnorm to round off denormal - significands at the right point, the input exponent must be - adjusted to be the actual value it would have after conversion to - the final floating point type. This adjustment has been - implemented for all type conversions (etoe53, etc.) and decimal - conversions, but not for the arithmetic functions (eadd, etc.). - Data types having standard 15-bit exponents are not affected by - this, but SFmode and DFmode are affected. For example, ediv with - rndprc = 24 will not round correctly to 24-bit precision if the - result is denormal. */ - -static int rlast = -1; -static int rw = 0; -static unsigned EMUSHORT rmsk = 0; -static unsigned EMUSHORT rmbit = 0; -static unsigned EMUSHORT rebit = 0; -static int re = 0; -static unsigned EMUSHORT rbit[NI]; - -static void -emdnorm (s, lost, subflg, exp, rcntrl) - unsigned EMUSHORT s[]; - int lost; - int subflg; - EMULONG exp; - int rcntrl; -{ - int i, j; - unsigned EMUSHORT r; - - /* Normalize */ - j = enormlz (s); - - /* a blank significand could mean either zero or infinity. */ -#ifndef INFINITY - if (j > NBITS) - { - ecleazs (s); - return; - } -#endif - exp -= j; -#ifndef INFINITY - if (exp >= 32767L) - goto overf; -#else - if ((j > NBITS) && (exp < 32767)) - { - ecleazs (s); - return; - } -#endif - if (exp < 0L) - { - if (exp > (EMULONG) (-NBITS - 1)) - { - j = (int) exp; - i = eshift (s, j); - if (i) - lost = 1; - } - else - { - ecleazs (s); - return; - } - } - /* Round off, unless told not to by rcntrl. */ - if (rcntrl == 0) - goto mdfin; - /* Set up rounding parameters if the control register changed. */ - if (rndprc != rlast) - { - ecleaz (rbit); - switch (rndprc) - { - default: - case NBITS: - rw = NI - 1; /* low guard word */ - rmsk = 0xffff; - rmbit = 0x8000; - re = rw - 1; - rebit = 1; - break; - - case 113: - rw = 10; - rmsk = 0x7fff; - rmbit = 0x4000; - rebit = 0x8000; - re = rw; - break; - - case 64: - rw = 7; - rmsk = 0xffff; - rmbit = 0x8000; - re = rw - 1; - rebit = 1; - break; - - /* For DEC or IBM arithmetic */ - case 56: - rw = 6; - rmsk = 0xff; - rmbit = 0x80; - rebit = 0x100; - re = rw; - break; - - case 53: - rw = 6; - rmsk = 0x7ff; - rmbit = 0x0400; - rebit = 0x800; - re = rw; - break; - - /* For C4x arithmetic */ - case 32: - rw = 5; - rmsk = 0xffff; - rmbit = 0x8000; - rebit = 1; - re = rw - 1; - break; - - case 24: - rw = 4; - rmsk = 0xff; - rmbit = 0x80; - rebit = 0x100; - re = rw; - break; - } - rbit[re] = rebit; - rlast = rndprc; - } - - /* Shift down 1 temporarily if the data structure has an implied - most significant bit and the number is denormal. - Intel long double denormals also lose one bit of precision. */ - if ((exp <= 0) && (rndprc != NBITS) - && ((rndprc != 64) || ((rndprc == 64) && ! REAL_WORDS_BIG_ENDIAN))) - { - lost |= s[NI - 1] & 1; - eshdn1 (s); - } - /* Clear out all bits below the rounding bit, - remembering in r if any were nonzero. */ - r = s[rw] & rmsk; - if (rndprc < NBITS) - { - i = rw + 1; - while (i < NI) - { - if (s[i]) - r |= 1; - s[i] = 0; - ++i; - } - } - s[rw] &= ~rmsk; - if ((r & rmbit) != 0) - { -#ifndef C4X - if (r == rmbit) - { - if (lost == 0) - { /* round to even */ - if ((s[re] & rebit) == 0) - goto mddone; - } - else - { - if (subflg != 0) - goto mddone; - } - } -#endif - eaddm (rbit, s); - } - mddone: -/* Undo the temporary shift for denormal values. */ - if ((exp <= 0) && (rndprc != NBITS) - && ((rndprc != 64) || ((rndprc == 64) && ! REAL_WORDS_BIG_ENDIAN))) - { - eshup1 (s); - } - if (s[2] != 0) - { /* overflow on roundoff */ - eshdn1 (s); - exp += 1; - } - mdfin: - s[NI - 1] = 0; - if (exp >= 32767L) - { -#ifndef INFINITY - overf: -#endif -#ifdef INFINITY - s[1] = 32767; - for (i = 2; i < NI - 1; i++) - s[i] = 0; - if (extra_warnings) - warning ("floating point overflow"); -#else - s[1] = 32766; - s[2] = 0; - for (i = M + 1; i < NI - 1; i++) - s[i] = 0xffff; - s[NI - 1] = 0; - if ((rndprc < 64) || (rndprc == 113)) - { - s[rw] &= ~rmsk; - if (rndprc == 24) - { - s[5] = 0; - s[6] = 0; - } - } -#endif - return; - } - if (exp < 0) - s[1] = 0; - else - s[1] = (unsigned EMUSHORT) exp; -} - -/* Subtract. C = B - A, all e type numbers. */ - -static int subflg = 0; - -static void -esub (a, b, c) - unsigned EMUSHORT *a, *b, *c; -{ - -#ifdef NANS - if (eisnan (a)) - { - emov (a, c); - return; - } - if (eisnan (b)) - { - emov (b, c); - return; - } -/* Infinity minus infinity is a NaN. - Test for subtracting infinities of the same sign. */ - if (eisinf (a) && eisinf (b) - && ((eisneg (a) ^ eisneg (b)) == 0)) - { - mtherr ("esub", INVALID); - enan (c, 0); - return; - } -#endif - subflg = 1; - eadd1 (a, b, c); -} - -/* Add. C = A + B, all e type. */ - -static void -eadd (a, b, c) - unsigned EMUSHORT *a, *b, *c; -{ - -#ifdef NANS -/* NaN plus anything is a NaN. */ - if (eisnan (a)) - { - emov (a, c); - return; - } - if (eisnan (b)) - { - emov (b, c); - return; - } -/* Infinity minus infinity is a NaN. - Test for adding infinities of opposite signs. */ - if (eisinf (a) && eisinf (b) - && ((eisneg (a) ^ eisneg (b)) != 0)) - { - mtherr ("esub", INVALID); - enan (c, 0); - return; - } -#endif - subflg = 0; - eadd1 (a, b, c); -} - -/* Arithmetic common to both addition and subtraction. */ - -static void -eadd1 (a, b, c) - unsigned EMUSHORT *a, *b, *c; -{ - unsigned EMUSHORT ai[NI], bi[NI], ci[NI]; - int i, lost, j, k; - EMULONG lt, lta, ltb; - -#ifdef INFINITY - if (eisinf (a)) - { - emov (a, c); - if (subflg) - eneg (c); - return; - } - if (eisinf (b)) - { - emov (b, c); - return; - } -#endif - emovi (a, ai); - emovi (b, bi); - if (subflg) - ai[0] = ~ai[0]; - - /* compare exponents */ - lta = ai[E]; - ltb = bi[E]; - lt = lta - ltb; - if (lt > 0L) - { /* put the larger number in bi */ - emovz (bi, ci); - emovz (ai, bi); - emovz (ci, ai); - ltb = bi[E]; - lt = -lt; - } - lost = 0; - if (lt != 0L) - { - if (lt < (EMULONG) (-NBITS - 1)) - goto done; /* answer same as larger addend */ - k = (int) lt; - lost = eshift (ai, k); /* shift the smaller number down */ - } - else - { - /* exponents were the same, so must compare significands */ - i = ecmpm (ai, bi); - if (i == 0) - { /* the numbers are identical in magnitude */ - /* if different signs, result is zero */ - if (ai[0] != bi[0]) - { - eclear (c); - return; - } - /* if same sign, result is double */ - /* double denormalized tiny number */ - if ((bi[E] == 0) && ((bi[3] & 0x8000) == 0)) - { - eshup1 (bi); - goto done; - } - /* add 1 to exponent unless both are zero! */ - for (j = 1; j < NI - 1; j++) - { - if (bi[j] != 0) - { - ltb += 1; - if (ltb >= 0x7fff) - { - eclear (c); - if (ai[0] != 0) - eneg (c); - einfin (c); - return; - } - break; - } - } - bi[E] = (unsigned EMUSHORT) ltb; - goto done; - } - if (i > 0) - { /* put the larger number in bi */ - emovz (bi, ci); - emovz (ai, bi); - emovz (ci, ai); - } - } - if (ai[0] == bi[0]) - { - eaddm (ai, bi); - subflg = 0; - } - else - { - esubm (ai, bi); - subflg = 1; - } - emdnorm (bi, lost, subflg, ltb, 64); - - done: - emovo (bi, c); -} - -/* Divide: C = B/A, all e type. */ - -static void -ediv (a, b, c) - unsigned EMUSHORT *a, *b, *c; -{ - unsigned EMUSHORT ai[NI], bi[NI]; - int i, sign; - EMULONG lt, lta, ltb; - -/* IEEE says if result is not a NaN, the sign is "-" if and only if - operands have opposite signs -- but flush -0 to 0 later if not IEEE. */ - sign = eisneg(a) ^ eisneg(b); - -#ifdef NANS -/* Return any NaN input. */ - if (eisnan (a)) - { - emov (a, c); - return; - } - if (eisnan (b)) - { - emov (b, c); - return; - } -/* Zero over zero, or infinity over infinity, is a NaN. */ - if (((ecmp (a, ezero) == 0) && (ecmp (b, ezero) == 0)) - || (eisinf (a) && eisinf (b))) - { - mtherr ("ediv", INVALID); - enan (c, sign); - return; - } -#endif -/* Infinity over anything else is infinity. */ -#ifdef INFINITY - if (eisinf (b)) - { - einfin (c); - goto divsign; - } -/* Anything else over infinity is zero. */ - if (eisinf (a)) - { - eclear (c); - goto divsign; - } -#endif - emovi (a, ai); - emovi (b, bi); - lta = ai[E]; - ltb = bi[E]; - if (bi[E] == 0) - { /* See if numerator is zero. */ - for (i = 1; i < NI - 1; i++) - { - if (bi[i] != 0) - { - ltb -= enormlz (bi); - goto dnzro1; - } - } - eclear (c); - goto divsign; - } - dnzro1: - - if (ai[E] == 0) - { /* possible divide by zero */ - for (i = 1; i < NI - 1; i++) - { - if (ai[i] != 0) - { - lta -= enormlz (ai); - goto dnzro2; - } - } -/* Divide by zero is not an invalid operation. - It is a divide-by-zero operation! */ - einfin (c); - mtherr ("ediv", SING); - goto divsign; - } - dnzro2: - - i = edivm (ai, bi); - /* calculate exponent */ - lt = ltb - lta + EXONE; - emdnorm (bi, i, 0, lt, 64); - emovo (bi, c); - - divsign: - - if (sign -#ifndef IEEE - && (ecmp (c, ezero) != 0) -#endif - ) - *(c+(NE-1)) |= 0x8000; - else - *(c+(NE-1)) &= ~0x8000; -} - -/* Multiply e-types A and B, return e-type product C. */ - -static void -emul (a, b, c) - unsigned EMUSHORT *a, *b, *c; -{ - unsigned EMUSHORT ai[NI], bi[NI]; - int i, j, sign; - EMULONG lt, lta, ltb; - -/* IEEE says if result is not a NaN, the sign is "-" if and only if - operands have opposite signs -- but flush -0 to 0 later if not IEEE. */ - sign = eisneg(a) ^ eisneg(b); - -#ifdef NANS -/* NaN times anything is the same NaN. */ - if (eisnan (a)) - { - emov (a, c); - return; - } - if (eisnan (b)) - { - emov (b, c); - return; - } -/* Zero times infinity is a NaN. */ - if ((eisinf (a) && (ecmp (b, ezero) == 0)) - || (eisinf (b) && (ecmp (a, ezero) == 0))) - { - mtherr ("emul", INVALID); - enan (c, sign); - return; - } -#endif -/* Infinity times anything else is infinity. */ -#ifdef INFINITY - if (eisinf (a) || eisinf (b)) - { - einfin (c); - goto mulsign; - } -#endif - emovi (a, ai); - emovi (b, bi); - lta = ai[E]; - ltb = bi[E]; - if (ai[E] == 0) - { - for (i = 1; i < NI - 1; i++) - { - if (ai[i] != 0) - { - lta -= enormlz (ai); - goto mnzer1; - } - } - eclear (c); - goto mulsign; - } - mnzer1: - - if (bi[E] == 0) - { - for (i = 1; i < NI - 1; i++) - { - if (bi[i] != 0) - { - ltb -= enormlz (bi); - goto mnzer2; - } - } - eclear (c); - goto mulsign; - } - mnzer2: - - /* Multiply significands */ - j = emulm (ai, bi); - /* calculate exponent */ - lt = lta + ltb - (EXONE - 1); - emdnorm (bi, j, 0, lt, 64); - emovo (bi, c); - - mulsign: - - if (sign -#ifndef IEEE - && (ecmp (c, ezero) != 0) -#endif - ) - *(c+(NE-1)) |= 0x8000; - else - *(c+(NE-1)) &= ~0x8000; -} - -/* Convert double precision PE to e-type Y. */ - -static void -e53toe (pe, y) - unsigned EMUSHORT *pe, *y; -{ -#ifdef DEC - - dectoe (pe, y); - -#else -#ifdef IBM - - ibmtoe (pe, y, DFmode); - -#else -#ifdef C4X - - c4xtoe (pe, y, HFmode); - -#else - register unsigned EMUSHORT r; - register unsigned EMUSHORT *e, *p; - unsigned EMUSHORT yy[NI]; - int denorm, k; - - e = pe; - denorm = 0; /* flag if denormalized number */ - ecleaz (yy); - if (! REAL_WORDS_BIG_ENDIAN) - e += 3; - r = *e; - yy[0] = 0; - if (r & 0x8000) - yy[0] = 0xffff; - yy[M] = (r & 0x0f) | 0x10; - r &= ~0x800f; /* strip sign and 4 significand bits */ -#ifdef INFINITY - if (r == 0x7ff0) - { -#ifdef NANS - if (! REAL_WORDS_BIG_ENDIAN) - { - if (((pe[3] & 0xf) != 0) || (pe[2] != 0) - || (pe[1] != 0) || (pe[0] != 0)) - { - enan (y, yy[0] != 0); - return; - } - } - else - { - if (((pe[0] & 0xf) != 0) || (pe[1] != 0) - || (pe[2] != 0) || (pe[3] != 0)) - { - enan (y, yy[0] != 0); - return; - } - } -#endif /* NANS */ - eclear (y); - einfin (y); - if (yy[0]) - eneg (y); - return; - } -#endif /* INFINITY */ - r >>= 4; - /* If zero exponent, then the significand is denormalized. - So take back the understood high significand bit. */ - - if (r == 0) - { - denorm = 1; - yy[M] &= ~0x10; - } - r += EXONE - 01777; - yy[E] = r; - p = &yy[M + 1]; -#ifdef IEEE - if (! REAL_WORDS_BIG_ENDIAN) - { - *p++ = *(--e); - *p++ = *(--e); - *p++ = *(--e); - } - else - { - ++e; - *p++ = *e++; - *p++ = *e++; - *p++ = *e++; - } -#endif - eshift (yy, -5); - if (denorm) - { - /* If zero exponent, then normalize the significand. */ - if ((k = enormlz (yy)) > NBITS) - ecleazs (yy); - else - yy[E] -= (unsigned EMUSHORT) (k - 1); - } - emovo (yy, y); -#endif /* not C4X */ -#endif /* not IBM */ -#endif /* not DEC */ -} - -/* Convert double extended precision float PE to e type Y. */ - -static void -e64toe (pe, y) - unsigned EMUSHORT *pe, *y; -{ - unsigned EMUSHORT yy[NI]; - unsigned EMUSHORT *e, *p, *q; - int i; - - e = pe; - p = yy; - for (i = 0; i < NE - 5; i++) - *p++ = 0; -/* This precision is not ordinarily supported on DEC or IBM. */ -#ifdef DEC - for (i = 0; i < 5; i++) - *p++ = *e++; -#endif -#ifdef IBM - p = &yy[0] + (NE - 1); - *p-- = *e++; - ++e; - for (i = 0; i < 5; i++) - *p-- = *e++; -#endif -#ifdef IEEE - if (! REAL_WORDS_BIG_ENDIAN) - { - for (i = 0; i < 5; i++) - *p++ = *e++; - - /* For denormal long double Intel format, shift significand up one - -- but only if the top significand bit is zero. A top bit of 1 - is "pseudodenormal" when the exponent is zero. */ - if((yy[NE-1] & 0x7fff) == 0 && (yy[NE-2] & 0x8000) == 0) - { - unsigned EMUSHORT temp[NI]; - - emovi(yy, temp); - eshup1(temp); - emovo(temp,y); - return; - } - } - else - { - p = &yy[0] + (NE - 1); -#ifdef ARM_EXTENDED_IEEE_FORMAT - /* For ARMs, the exponent is in the lowest 15 bits of the word. */ - *p-- = (e[0] & 0x8000) | (e[1] & 0x7ffff); - e += 2; -#else - *p-- = *e++; - ++e; -#endif - for (i = 0; i < 4; i++) - *p-- = *e++; - } -#endif -#ifdef INFINITY - /* Point to the exponent field and check max exponent cases. */ - p = &yy[NE - 1]; - if ((*p & 0x7fff) == 0x7fff) - { -#ifdef NANS - if (! REAL_WORDS_BIG_ENDIAN) - { - for (i = 0; i < 4; i++) - { - if ((i != 3 && pe[i] != 0) - /* Anything but 0x8000 here, including 0, is a NaN. */ - || (i == 3 && pe[i] != 0x8000)) - { - enan (y, (*p & 0x8000) != 0); - return; - } - } - } - else - { -#ifdef ARM_EXTENDED_IEEE_FORMAT - for (i = 2; i <= 5; i++) - { - if (pe[i] != 0) - { - enan (y, (*p & 0x8000) != 0); - return; - } - } -#else /* not ARM */ - /* In Motorola extended precision format, the most significant - bit of an infinity mantissa could be either 1 or 0. It is - the lower order bits that tell whether the value is a NaN. */ - if ((pe[2] & 0x7fff) != 0) - goto bigend_nan; - - for (i = 3; i <= 5; i++) - { - if (pe[i] != 0) - { -bigend_nan: - enan (y, (*p & 0x8000) != 0); - return; - } - } -#endif /* not ARM */ - } -#endif /* NANS */ - eclear (y); - einfin (y); - if (*p & 0x8000) - eneg (y); - return; - } -#endif /* INFINITY */ - p = yy; - q = y; - for (i = 0; i < NE; i++) - *q++ = *p++; -} - -/* Convert 128-bit long double precision float PE to e type Y. */ - -static void -e113toe (pe, y) - unsigned EMUSHORT *pe, *y; -{ - register unsigned EMUSHORT r; - unsigned EMUSHORT *e, *p; - unsigned EMUSHORT yy[NI]; - int denorm, i; - - e = pe; - denorm = 0; - ecleaz (yy); -#ifdef IEEE - if (! REAL_WORDS_BIG_ENDIAN) - e += 7; -#endif - r = *e; - yy[0] = 0; - if (r & 0x8000) - yy[0] = 0xffff; - r &= 0x7fff; -#ifdef INFINITY - if (r == 0x7fff) - { -#ifdef NANS - if (! REAL_WORDS_BIG_ENDIAN) - { - for (i = 0; i < 7; i++) - { - if (pe[i] != 0) - { - enan (y, yy[0] != 0); - return; - } - } - } - else - { - for (i = 1; i < 8; i++) - { - if (pe[i] != 0) - { - enan (y, yy[0] != 0); - return; - } - } - } -#endif /* NANS */ - eclear (y); - einfin (y); - if (yy[0]) - eneg (y); - return; - } -#endif /* INFINITY */ - yy[E] = r; - p = &yy[M + 1]; -#ifdef IEEE - if (! REAL_WORDS_BIG_ENDIAN) - { - for (i = 0; i < 7; i++) - *p++ = *(--e); - } - else - { - ++e; - for (i = 0; i < 7; i++) - *p++ = *e++; - } -#endif -/* If denormal, remove the implied bit; else shift down 1. */ - if (r == 0) - { - yy[M] = 0; - } - else - { - yy[M] = 1; - eshift (yy, -1); - } - emovo (yy, y); -} - -/* Convert single precision float PE to e type Y. */ - -static void -e24toe (pe, y) - unsigned EMUSHORT *pe, *y; -{ -#ifdef IBM - - ibmtoe (pe, y, SFmode); - -#else - -#ifdef C4X - - c4xtoe (pe, y, QFmode); - -#else - - register unsigned EMUSHORT r; - register unsigned EMUSHORT *e, *p; - unsigned EMUSHORT yy[NI]; - int denorm, k; - - e = pe; - denorm = 0; /* flag if denormalized number */ - ecleaz (yy); -#ifdef IEEE - if (! REAL_WORDS_BIG_ENDIAN) - e += 1; -#endif -#ifdef DEC - e += 1; -#endif - r = *e; - yy[0] = 0; - if (r & 0x8000) - yy[0] = 0xffff; - yy[M] = (r & 0x7f) | 0200; - r &= ~0x807f; /* strip sign and 7 significand bits */ -#ifdef INFINITY - if (r == 0x7f80) - { -#ifdef NANS - if (REAL_WORDS_BIG_ENDIAN) - { - if (((pe[0] & 0x7f) != 0) || (pe[1] != 0)) - { - enan (y, yy[0] != 0); - return; - } - } - else - { - if (((pe[1] & 0x7f) != 0) || (pe[0] != 0)) - { - enan (y, yy[0] != 0); - return; - } - } -#endif /* NANS */ - eclear (y); - einfin (y); - if (yy[0]) - eneg (y); - return; - } -#endif /* INFINITY */ - r >>= 7; - /* If zero exponent, then the significand is denormalized. - So take back the understood high significand bit. */ - if (r == 0) - { - denorm = 1; - yy[M] &= ~0200; - } - r += EXONE - 0177; - yy[E] = r; - p = &yy[M + 1]; -#ifdef DEC - *p++ = *(--e); -#endif -#ifdef IEEE - if (! REAL_WORDS_BIG_ENDIAN) - *p++ = *(--e); - else - { - ++e; - *p++ = *e++; - } -#endif - eshift (yy, -8); - if (denorm) - { /* if zero exponent, then normalize the significand */ - if ((k = enormlz (yy)) > NBITS) - ecleazs (yy); - else - yy[E] -= (unsigned EMUSHORT) (k - 1); - } - emovo (yy, y); -#endif /* not C4X */ -#endif /* not IBM */ -} - -/* Convert e-type X to IEEE 128-bit long double format E. */ - -static void -etoe113 (x, e) - unsigned EMUSHORT *x, *e; -{ - unsigned EMUSHORT xi[NI]; - EMULONG exp; - int rndsav; - -#ifdef NANS - if (eisnan (x)) - { - make_nan (e, eisneg (x), TFmode); - return; - } -#endif - emovi (x, xi); - exp = (EMULONG) xi[E]; -#ifdef INFINITY - if (eisinf (x)) - goto nonorm; -#endif - /* round off to nearest or even */ - rndsav = rndprc; - rndprc = 113; - emdnorm (xi, 0, 0, exp, 64); - rndprc = rndsav; - nonorm: - toe113 (xi, e); -} - -/* Convert exploded e-type X, that has already been rounded to - 113-bit precision, to IEEE 128-bit long double format Y. */ - -static void -toe113 (a, b) - unsigned EMUSHORT *a, *b; -{ - register unsigned EMUSHORT *p, *q; - unsigned EMUSHORT i; - -#ifdef NANS - if (eiisnan (a)) - { - make_nan (b, eiisneg (a), TFmode); - return; - } -#endif - p = a; - if (REAL_WORDS_BIG_ENDIAN) - q = b; - else - q = b + 7; /* point to output exponent */ - - /* If not denormal, delete the implied bit. */ - if (a[E] != 0) - { - eshup1 (a); - } - /* combine sign and exponent */ - i = *p++; - if (REAL_WORDS_BIG_ENDIAN) - { - if (i) - *q++ = *p++ | 0x8000; - else - *q++ = *p++; - } - else - { - if (i) - *q-- = *p++ | 0x8000; - else - *q-- = *p++; - } - /* skip over guard word */ - ++p; - /* move the significand */ - if (REAL_WORDS_BIG_ENDIAN) - { - for (i = 0; i < 7; i++) - *q++ = *p++; - } - else - { - for (i = 0; i < 7; i++) - *q-- = *p++; - } -} - -/* Convert e-type X to IEEE double extended format E. */ - -static void -etoe64 (x, e) - unsigned EMUSHORT *x, *e; -{ - unsigned EMUSHORT xi[NI]; - EMULONG exp; - int rndsav; - -#ifdef NANS - if (eisnan (x)) - { - make_nan (e, eisneg (x), XFmode); - return; - } -#endif - emovi (x, xi); - /* adjust exponent for offset */ - exp = (EMULONG) xi[E]; -#ifdef INFINITY - if (eisinf (x)) - goto nonorm; -#endif - /* round off to nearest or even */ - rndsav = rndprc; - rndprc = 64; - emdnorm (xi, 0, 0, exp, 64); - rndprc = rndsav; - nonorm: - toe64 (xi, e); -} - -/* Convert exploded e-type X, that has already been rounded to - 64-bit precision, to IEEE double extended format Y. */ - -static void -toe64 (a, b) - unsigned EMUSHORT *a, *b; -{ - register unsigned EMUSHORT *p, *q; - unsigned EMUSHORT i; - -#ifdef NANS - if (eiisnan (a)) - { - make_nan (b, eiisneg (a), XFmode); - return; - } -#endif - /* Shift denormal long double Intel format significand down one bit. */ - if ((a[E] == 0) && ! REAL_WORDS_BIG_ENDIAN) - eshdn1 (a); - p = a; -#ifdef IBM - q = b; -#endif -#ifdef DEC - q = b + 4; -#endif -#ifdef IEEE - if (REAL_WORDS_BIG_ENDIAN) - q = b; - else - { - q = b + 4; /* point to output exponent */ -#if LONG_DOUBLE_TYPE_SIZE == 96 - /* Clear the last two bytes of 12-byte Intel format */ - *(q+1) = 0; -#endif - } -#endif - - /* combine sign and exponent */ - i = *p++; -#ifdef IBM - if (i) - *q++ = *p++ | 0x8000; - else - *q++ = *p++; - *q++ = 0; -#endif -#ifdef DEC - if (i) - *q-- = *p++ | 0x8000; - else - *q-- = *p++; -#endif -#ifdef IEEE - if (REAL_WORDS_BIG_ENDIAN) - { -#ifdef ARM_EXTENDED_IEEE_FORMAT - /* The exponent is in the lowest 15 bits of the first word. */ - *q++ = i ? 0x8000 : 0; - *q++ = *p++; -#else - if (i) - *q++ = *p++ | 0x8000; - else - *q++ = *p++; - *q++ = 0; -#endif - } - else - { - if (i) - *q-- = *p++ | 0x8000; - else - *q-- = *p++; - } -#endif - /* skip over guard word */ - ++p; - /* move the significand */ -#ifdef IBM - for (i = 0; i < 4; i++) - *q++ = *p++; -#endif -#ifdef DEC - for (i = 0; i < 4; i++) - *q-- = *p++; -#endif -#ifdef IEEE - if (REAL_WORDS_BIG_ENDIAN) - { - for (i = 0; i < 4; i++) - *q++ = *p++; - } - else - { -#ifdef INFINITY - if (eiisinf (a)) - { - /* Intel long double infinity significand. */ - *q-- = 0x8000; - *q-- = 0; - *q-- = 0; - *q = 0; - return; - } -#endif - for (i = 0; i < 4; i++) - *q-- = *p++; - } -#endif -} - -/* e type to double precision. */ - -#ifdef DEC -/* Convert e-type X to DEC-format double E. */ - -static void -etoe53 (x, e) - unsigned EMUSHORT *x, *e; -{ - etodec (x, e); /* see etodec.c */ -} - -/* Convert exploded e-type X, that has already been rounded to - 56-bit double precision, to DEC double Y. */ - -static void -toe53 (x, y) - unsigned EMUSHORT *x, *y; -{ - todec (x, y); -} - -#else -#ifdef IBM -/* Convert e-type X to IBM 370-format double E. */ - -static void -etoe53 (x, e) - unsigned EMUSHORT *x, *e; -{ - etoibm (x, e, DFmode); -} - -/* Convert exploded e-type X, that has already been rounded to - 56-bit precision, to IBM 370 double Y. */ - -static void -toe53 (x, y) - unsigned EMUSHORT *x, *y; -{ - toibm (x, y, DFmode); -} - -#else /* it's neither DEC nor IBM */ -#ifdef C4X -/* Convert e-type X to C4X-format long double E. */ - -static void -etoe53 (x, e) - unsigned EMUSHORT *x, *e; -{ - etoc4x (x, e, HFmode); -} - -/* Convert exploded e-type X, that has already been rounded to - 56-bit precision, to IBM 370 double Y. */ - -static void -toe53 (x, y) - unsigned EMUSHORT *x, *y; -{ - toc4x (x, y, HFmode); -} - -#else /* it's neither DEC nor IBM nor C4X */ - -/* Convert e-type X to IEEE double E. */ - -static void -etoe53 (x, e) - unsigned EMUSHORT *x, *e; -{ - unsigned EMUSHORT xi[NI]; - EMULONG exp; - int rndsav; - -#ifdef NANS - if (eisnan (x)) - { - make_nan (e, eisneg (x), DFmode); - return; - } -#endif - emovi (x, xi); - /* adjust exponent for offsets */ - exp = (EMULONG) xi[E] - (EXONE - 0x3ff); -#ifdef INFINITY - if (eisinf (x)) - goto nonorm; -#endif - /* round off to nearest or even */ - rndsav = rndprc; - rndprc = 53; - emdnorm (xi, 0, 0, exp, 64); - rndprc = rndsav; - nonorm: - toe53 (xi, e); -} - -/* Convert exploded e-type X, that has already been rounded to - 53-bit precision, to IEEE double Y. */ - -static void -toe53 (x, y) - unsigned EMUSHORT *x, *y; -{ - unsigned EMUSHORT i; - unsigned EMUSHORT *p; - -#ifdef NANS - if (eiisnan (x)) - { - make_nan (y, eiisneg (x), DFmode); - return; - } -#endif - p = &x[0]; -#ifdef IEEE - if (! REAL_WORDS_BIG_ENDIAN) - y += 3; -#endif - *y = 0; /* output high order */ - if (*p++) - *y = 0x8000; /* output sign bit */ - - i = *p++; - if (i >= (unsigned int) 2047) - { - /* Saturate at largest number less than infinity. */ -#ifdef INFINITY - *y |= 0x7ff0; - if (! REAL_WORDS_BIG_ENDIAN) - { - *(--y) = 0; - *(--y) = 0; - *(--y) = 0; - } - else - { - ++y; - *y++ = 0; - *y++ = 0; - *y++ = 0; - } -#else - *y |= (unsigned EMUSHORT) 0x7fef; - if (! REAL_WORDS_BIG_ENDIAN) - { - *(--y) = 0xffff; - *(--y) = 0xffff; - *(--y) = 0xffff; - } - else - { - ++y; - *y++ = 0xffff; - *y++ = 0xffff; - *y++ = 0xffff; - } -#endif - return; - } - if (i == 0) - { - eshift (x, 4); - } - else - { - i <<= 4; - eshift (x, 5); - } - i |= *p++ & (unsigned EMUSHORT) 0x0f; /* *p = xi[M] */ - *y |= (unsigned EMUSHORT) i; /* high order output already has sign bit set */ - if (! REAL_WORDS_BIG_ENDIAN) - { - *(--y) = *p++; - *(--y) = *p++; - *(--y) = *p; - } - else - { - ++y; - *y++ = *p++; - *y++ = *p++; - *y++ = *p++; - } -} - -#endif /* not C4X */ -#endif /* not IBM */ -#endif /* not DEC */ - - - -/* e type to single precision. */ - -#ifdef IBM -/* Convert e-type X to IBM 370 float E. */ - -static void -etoe24 (x, e) - unsigned EMUSHORT *x, *e; -{ - etoibm (x, e, SFmode); -} - -/* Convert exploded e-type X, that has already been rounded to - float precision, to IBM 370 float Y. */ - -static void -toe24 (x, y) - unsigned EMUSHORT *x, *y; -{ - toibm (x, y, SFmode); -} - -#else - -#ifdef C4X -/* Convert e-type X to C4X float E. */ - -static void -etoe24 (x, e) - unsigned EMUSHORT *x, *e; -{ - etoc4x (x, e, QFmode); -} - -/* Convert exploded e-type X, that has already been rounded to - float precision, to IBM 370 float Y. */ - -static void -toe24 (x, y) - unsigned EMUSHORT *x, *y; -{ - toc4x (x, y, QFmode); -} - -#else - -/* Convert e-type X to IEEE float E. DEC float is the same as IEEE float. */ - -static void -etoe24 (x, e) - unsigned EMUSHORT *x, *e; -{ - EMULONG exp; - unsigned EMUSHORT xi[NI]; - int rndsav; - -#ifdef NANS - if (eisnan (x)) - { - make_nan (e, eisneg (x), SFmode); - return; - } -#endif - emovi (x, xi); - /* adjust exponent for offsets */ - exp = (EMULONG) xi[E] - (EXONE - 0177); -#ifdef INFINITY - if (eisinf (x)) - goto nonorm; -#endif - /* round off to nearest or even */ - rndsav = rndprc; - rndprc = 24; - emdnorm (xi, 0, 0, exp, 64); - rndprc = rndsav; - nonorm: - toe24 (xi, e); -} - -/* Convert exploded e-type X, that has already been rounded to - float precision, to IEEE float Y. */ - -static void -toe24 (x, y) - unsigned EMUSHORT *x, *y; -{ - unsigned EMUSHORT i; - unsigned EMUSHORT *p; - -#ifdef NANS - if (eiisnan (x)) - { - make_nan (y, eiisneg (x), SFmode); - return; - } -#endif - p = &x[0]; -#ifdef IEEE - if (! REAL_WORDS_BIG_ENDIAN) - y += 1; -#endif -#ifdef DEC - y += 1; -#endif - *y = 0; /* output high order */ - if (*p++) - *y = 0x8000; /* output sign bit */ - - i = *p++; -/* Handle overflow cases. */ - if (i >= 255) - { -#ifdef INFINITY - *y |= (unsigned EMUSHORT) 0x7f80; -#ifdef DEC - *(--y) = 0; -#endif -#ifdef IEEE - if (! REAL_WORDS_BIG_ENDIAN) - *(--y) = 0; - else - { - ++y; - *y = 0; - } -#endif -#else /* no INFINITY */ - *y |= (unsigned EMUSHORT) 0x7f7f; -#ifdef DEC - *(--y) = 0xffff; -#endif -#ifdef IEEE - if (! REAL_WORDS_BIG_ENDIAN) - *(--y) = 0xffff; - else - { - ++y; - *y = 0xffff; - } -#endif -#ifdef ERANGE - errno = ERANGE; -#endif -#endif /* no INFINITY */ - return; - } - if (i == 0) - { - eshift (x, 7); - } - else - { - i <<= 7; - eshift (x, 8); - } - i |= *p++ & (unsigned EMUSHORT) 0x7f; /* *p = xi[M] */ - /* High order output already has sign bit set. */ - *y |= i; -#ifdef DEC - *(--y) = *p; -#endif -#ifdef IEEE - if (! REAL_WORDS_BIG_ENDIAN) - *(--y) = *p; - else - { - ++y; - *y = *p; - } -#endif -} -#endif /* not C4X */ -#endif /* not IBM */ - -/* Compare two e type numbers. - Return +1 if a > b - 0 if a == b - -1 if a < b - -2 if either a or b is a NaN. */ - -static int -ecmp (a, b) - unsigned EMUSHORT *a, *b; -{ - unsigned EMUSHORT ai[NI], bi[NI]; - register unsigned EMUSHORT *p, *q; - register int i; - int msign; - -#ifdef NANS - if (eisnan (a) || eisnan (b)) - return (-2); -#endif - emovi (a, ai); - p = ai; - emovi (b, bi); - q = bi; - - if (*p != *q) - { /* the signs are different */ - /* -0 equals + 0 */ - for (i = 1; i < NI - 1; i++) - { - if (ai[i] != 0) - goto nzro; - if (bi[i] != 0) - goto nzro; - } - return (0); - nzro: - if (*p == 0) - return (1); - else - return (-1); - } - /* both are the same sign */ - if (*p == 0) - msign = 1; - else - msign = -1; - i = NI - 1; - do - { - if (*p++ != *q++) - { - goto diff; - } - } - while (--i > 0); - - return (0); /* equality */ - - diff: - - if (*(--p) > *(--q)) - return (msign); /* p is bigger */ - else - return (-msign); /* p is littler */ -} - -#if 0 -/* Find e-type nearest integer to X, as floor (X + 0.5). */ - -static void -eround (x, y) - unsigned EMUSHORT *x, *y; -{ - eadd (ehalf, x, y); - efloor (y, y); -} -#endif /* 0 */ - -/* Convert HOST_WIDE_INT LP to e type Y. */ - -static void -ltoe (lp, y) - HOST_WIDE_INT *lp; - unsigned EMUSHORT *y; -{ - unsigned EMUSHORT yi[NI]; - unsigned HOST_WIDE_INT ll; - int k; - - ecleaz (yi); - if (*lp < 0) - { - /* make it positive */ - ll = (unsigned HOST_WIDE_INT) (-(*lp)); - yi[0] = 0xffff; /* put correct sign in the e type number */ - } - else - { - ll = (unsigned HOST_WIDE_INT) (*lp); - } - /* move the long integer to yi significand area */ -#if HOST_BITS_PER_WIDE_INT == 64 - yi[M] = (unsigned EMUSHORT) (ll >> 48); - yi[M + 1] = (unsigned EMUSHORT) (ll >> 32); - yi[M + 2] = (unsigned EMUSHORT) (ll >> 16); - yi[M + 3] = (unsigned EMUSHORT) ll; - yi[E] = EXONE + 47; /* exponent if normalize shift count were 0 */ -#else - yi[M] = (unsigned EMUSHORT) (ll >> 16); - yi[M + 1] = (unsigned EMUSHORT) ll; - yi[E] = EXONE + 15; /* exponent if normalize shift count were 0 */ -#endif - - if ((k = enormlz (yi)) > NBITS)/* normalize the significand */ - ecleaz (yi); /* it was zero */ - else - yi[E] -= (unsigned EMUSHORT) k;/* subtract shift count from exponent */ - emovo (yi, y); /* output the answer */ -} - -/* Convert unsigned HOST_WIDE_INT LP to e type Y. */ - -static void -ultoe (lp, y) - unsigned HOST_WIDE_INT *lp; - unsigned EMUSHORT *y; -{ - unsigned EMUSHORT yi[NI]; - unsigned HOST_WIDE_INT ll; - int k; - - ecleaz (yi); - ll = *lp; - - /* move the long integer to ayi significand area */ -#if HOST_BITS_PER_WIDE_INT == 64 - yi[M] = (unsigned EMUSHORT) (ll >> 48); - yi[M + 1] = (unsigned EMUSHORT) (ll >> 32); - yi[M + 2] = (unsigned EMUSHORT) (ll >> 16); - yi[M + 3] = (unsigned EMUSHORT) ll; - yi[E] = EXONE + 47; /* exponent if normalize shift count were 0 */ -#else - yi[M] = (unsigned EMUSHORT) (ll >> 16); - yi[M + 1] = (unsigned EMUSHORT) ll; - yi[E] = EXONE + 15; /* exponent if normalize shift count were 0 */ -#endif - - if ((k = enormlz (yi)) > NBITS)/* normalize the significand */ - ecleaz (yi); /* it was zero */ - else - yi[E] -= (unsigned EMUSHORT) k; /* subtract shift count from exponent */ - emovo (yi, y); /* output the answer */ -} - - -/* Find signed HOST_WIDE_INT integer I and floating point fractional - part FRAC of e-type (packed internal format) floating point input X. - The integer output I has the sign of the input, except that - positive overflow is permitted if FIXUNS_TRUNC_LIKE_FIX_TRUNC. - The output e-type fraction FRAC is the positive fractional - part of abs (X). */ - -static void -eifrac (x, i, frac) - unsigned EMUSHORT *x; - HOST_WIDE_INT *i; - unsigned EMUSHORT *frac; -{ - unsigned EMUSHORT xi[NI]; - int j, k; - unsigned HOST_WIDE_INT ll; - - emovi (x, xi); - k = (int) xi[E] - (EXONE - 1); - if (k <= 0) - { - /* if exponent <= 0, integer = 0 and real output is fraction */ - *i = 0L; - emovo (xi, frac); - return; - } - if (k > (HOST_BITS_PER_WIDE_INT - 1)) - { - /* long integer overflow: output large integer - and correct fraction */ - if (xi[0]) - *i = ((unsigned HOST_WIDE_INT) 1) << (HOST_BITS_PER_WIDE_INT - 1); - else - { -#ifdef FIXUNS_TRUNC_LIKE_FIX_TRUNC - /* In this case, let it overflow and convert as if unsigned. */ - euifrac (x, &ll, frac); - *i = (HOST_WIDE_INT) ll; - return; -#else - /* In other cases, return the largest positive integer. */ - *i = (((unsigned HOST_WIDE_INT) 1) << (HOST_BITS_PER_WIDE_INT - 1)) - 1; -#endif - } - eshift (xi, k); - if (extra_warnings) - warning ("overflow on truncation to integer"); - } - else if (k > 16) - { - /* Shift more than 16 bits: first shift up k-16 mod 16, - then shift up by 16's. */ - j = k - ((k >> 4) << 4); - eshift (xi, j); - ll = xi[M]; - k -= j; - do - { - eshup6 (xi); - ll = (ll << 16) | xi[M]; - } - while ((k -= 16) > 0); - *i = ll; - if (xi[0]) - *i = -(*i); - } - else - { - /* shift not more than 16 bits */ - eshift (xi, k); - *i = (HOST_WIDE_INT) xi[M] & 0xffff; - if (xi[0]) - *i = -(*i); - } - xi[0] = 0; - xi[E] = EXONE - 1; - xi[M] = 0; - if ((k = enormlz (xi)) > NBITS) - ecleaz (xi); - else - xi[E] -= (unsigned EMUSHORT) k; - - emovo (xi, frac); -} - - -/* Find unsigned HOST_WIDE_INT integer I and floating point fractional part - FRAC of e-type X. A negative input yields integer output = 0 but - correct fraction. */ - -static void -euifrac (x, i, frac) - unsigned EMUSHORT *x; - unsigned HOST_WIDE_INT *i; - unsigned EMUSHORT *frac; -{ - unsigned HOST_WIDE_INT ll; - unsigned EMUSHORT xi[NI]; - int j, k; - - emovi (x, xi); - k = (int) xi[E] - (EXONE - 1); - if (k <= 0) - { - /* if exponent <= 0, integer = 0 and argument is fraction */ - *i = 0L; - emovo (xi, frac); - return; - } - if (k > HOST_BITS_PER_WIDE_INT) - { - /* Long integer overflow: output large integer - and correct fraction. - Note, the BSD microvax compiler says that ~(0UL) - is a syntax error. */ - *i = ~(0L); - eshift (xi, k); - if (extra_warnings) - warning ("overflow on truncation to unsigned integer"); - } - else if (k > 16) - { - /* Shift more than 16 bits: first shift up k-16 mod 16, - then shift up by 16's. */ - j = k - ((k >> 4) << 4); - eshift (xi, j); - ll = xi[M]; - k -= j; - do - { - eshup6 (xi); - ll = (ll << 16) | xi[M]; - } - while ((k -= 16) > 0); - *i = ll; - } - else - { - /* shift not more than 16 bits */ - eshift (xi, k); - *i = (HOST_WIDE_INT) xi[M] & 0xffff; - } - - if (xi[0]) /* A negative value yields unsigned integer 0. */ - *i = 0L; - - xi[0] = 0; - xi[E] = EXONE - 1; - xi[M] = 0; - if ((k = enormlz (xi)) > NBITS) - ecleaz (xi); - else - xi[E] -= (unsigned EMUSHORT) k; - - emovo (xi, frac); -} - -/* Shift the significand of exploded e-type X up or down by SC bits. */ - -static int -eshift (x, sc) - unsigned EMUSHORT *x; - int sc; -{ - unsigned EMUSHORT lost; - unsigned EMUSHORT *p; - - if (sc == 0) - return (0); - - lost = 0; - p = x + NI - 1; - - if (sc < 0) - { - sc = -sc; - while (sc >= 16) - { - lost |= *p; /* remember lost bits */ - eshdn6 (x); - sc -= 16; - } - - while (sc >= 8) - { - lost |= *p & 0xff; - eshdn8 (x); - sc -= 8; - } - - while (sc > 0) - { - lost |= *p & 1; - eshdn1 (x); - sc -= 1; - } - } - else - { - while (sc >= 16) - { - eshup6 (x); - sc -= 16; - } - - while (sc >= 8) - { - eshup8 (x); - sc -= 8; - } - - while (sc > 0) - { - eshup1 (x); - sc -= 1; - } - } - if (lost) - lost = 1; - return ((int) lost); -} - -/* Shift normalize the significand area of exploded e-type X. - Return the shift count (up = positive). */ - -static int -enormlz (x) - unsigned EMUSHORT x[]; -{ - register unsigned EMUSHORT *p; - int sc; - - sc = 0; - p = &x[M]; - if (*p != 0) - goto normdn; - ++p; - if (*p & 0x8000) - return (0); /* already normalized */ - while (*p == 0) - { - eshup6 (x); - sc += 16; - - /* With guard word, there are NBITS+16 bits available. - Return true if all are zero. */ - if (sc > NBITS) - return (sc); - } - /* see if high byte is zero */ - while ((*p & 0xff00) == 0) - { - eshup8 (x); - sc += 8; - } - /* now shift 1 bit at a time */ - while ((*p & 0x8000) == 0) - { - eshup1 (x); - sc += 1; - if (sc > NBITS) - { - mtherr ("enormlz", UNDERFLOW); - return (sc); - } - } - return (sc); - - /* Normalize by shifting down out of the high guard word - of the significand */ - normdn: - - if (*p & 0xff00) - { - eshdn8 (x); - sc -= 8; - } - while (*p != 0) - { - eshdn1 (x); - sc -= 1; - - if (sc < -NBITS) - { - mtherr ("enormlz", OVERFLOW); - return (sc); - } - } - return (sc); -} - -/* Powers of ten used in decimal <-> binary conversions. */ - -#define NTEN 12 -#define MAXP 4096 - -#if LONG_DOUBLE_TYPE_SIZE == 128 -static unsigned EMUSHORT etens[NTEN + 1][NE] = -{ - {0x6576, 0x4a92, 0x804a, 0x153f, - 0xc94c, 0x979a, 0x8a20, 0x5202, 0xc460, 0x7525,}, /* 10**4096 */ - {0x6a32, 0xce52, 0x329a, 0x28ce, - 0xa74d, 0x5de4, 0xc53d, 0x3b5d, 0x9e8b, 0x5a92,}, /* 10**2048 */ - {0x526c, 0x50ce, 0xf18b, 0x3d28, - 0x650d, 0x0c17, 0x8175, 0x7586, 0xc976, 0x4d48,}, - {0x9c66, 0x58f8, 0xbc50, 0x5c54, - 0xcc65, 0x91c6, 0xa60e, 0xa0ae, 0xe319, 0x46a3,}, - {0x851e, 0xeab7, 0x98fe, 0x901b, - 0xddbb, 0xde8d, 0x9df9, 0xebfb, 0xaa7e, 0x4351,}, - {0x0235, 0x0137, 0x36b1, 0x336c, - 0xc66f, 0x8cdf, 0x80e9, 0x47c9, 0x93ba, 0x41a8,}, - {0x50f8, 0x25fb, 0xc76b, 0x6b71, - 0x3cbf, 0xa6d5, 0xffcf, 0x1f49, 0xc278, 0x40d3,}, - {0x0000, 0x0000, 0x0000, 0x0000, - 0xf020, 0xb59d, 0x2b70, 0xada8, 0x9dc5, 0x4069,}, - {0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0400, 0xc9bf, 0x8e1b, 0x4034,}, - {0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x2000, 0xbebc, 0x4019,}, - {0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x9c40, 0x400c,}, - {0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0xc800, 0x4005,}, - {0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0xa000, 0x4002,}, /* 10**1 */ -}; - -static unsigned EMUSHORT emtens[NTEN + 1][NE] = -{ - {0x2030, 0xcffc, 0xa1c3, 0x8123, - 0x2de3, 0x9fde, 0xd2ce, 0x04c8, 0xa6dd, 0x0ad8,}, /* 10**-4096 */ - {0x8264, 0xd2cb, 0xf2ea, 0x12d4, - 0x4925, 0x2de4, 0x3436, 0x534f, 0xceae, 0x256b,}, /* 10**-2048 */ - {0xf53f, 0xf698, 0x6bd3, 0x0158, - 0x87a6, 0xc0bd, 0xda57, 0x82a5, 0xa2a6, 0x32b5,}, - {0xe731, 0x04d4, 0xe3f2, 0xd332, - 0x7132, 0xd21c, 0xdb23, 0xee32, 0x9049, 0x395a,}, - {0xa23e, 0x5308, 0xfefb, 0x1155, - 0xfa91, 0x1939, 0x637a, 0x4325, 0xc031, 0x3cac,}, - {0xe26d, 0xdbde, 0xd05d, 0xb3f6, - 0xac7c, 0xe4a0, 0x64bc, 0x467c, 0xddd0, 0x3e55,}, - {0x2a20, 0x6224, 0x47b3, 0x98d7, - 0x3f23, 0xe9a5, 0xa539, 0xea27, 0xa87f, 0x3f2a,}, - {0x0b5b, 0x4af2, 0xa581, 0x18ed, - 0x67de, 0x94ba, 0x4539, 0x1ead, 0xcfb1, 0x3f94,}, - {0xbf71, 0xa9b3, 0x7989, 0xbe68, - 0x4c2e, 0xe15b, 0xc44d, 0x94be, 0xe695, 0x3fc9,}, - {0x3d4d, 0x7c3d, 0x36ba, 0x0d2b, - 0xfdc2, 0xcefc, 0x8461, 0x7711, 0xabcc, 0x3fe4,}, - {0xc155, 0xa4a8, 0x404e, 0x6113, - 0xd3c3, 0x652b, 0xe219, 0x1758, 0xd1b7, 0x3ff1,}, - {0xd70a, 0x70a3, 0x0a3d, 0xa3d7, - 0x3d70, 0xd70a, 0x70a3, 0x0a3d, 0xa3d7, 0x3ff8,}, - {0xcccd, 0xcccc, 0xcccc, 0xcccc, - 0xcccc, 0xcccc, 0xcccc, 0xcccc, 0xcccc, 0x3ffb,}, /* 10**-1 */ -}; -#else -/* LONG_DOUBLE_TYPE_SIZE is other than 128 */ -static unsigned EMUSHORT etens[NTEN + 1][NE] = -{ - {0xc94c, 0x979a, 0x8a20, 0x5202, 0xc460, 0x7525,}, /* 10**4096 */ - {0xa74d, 0x5de4, 0xc53d, 0x3b5d, 0x9e8b, 0x5a92,}, /* 10**2048 */ - {0x650d, 0x0c17, 0x8175, 0x7586, 0xc976, 0x4d48,}, - {0xcc65, 0x91c6, 0xa60e, 0xa0ae, 0xe319, 0x46a3,}, - {0xddbc, 0xde8d, 0x9df9, 0xebfb, 0xaa7e, 0x4351,}, - {0xc66f, 0x8cdf, 0x80e9, 0x47c9, 0x93ba, 0x41a8,}, - {0x3cbf, 0xa6d5, 0xffcf, 0x1f49, 0xc278, 0x40d3,}, - {0xf020, 0xb59d, 0x2b70, 0xada8, 0x9dc5, 0x4069,}, - {0x0000, 0x0000, 0x0400, 0xc9bf, 0x8e1b, 0x4034,}, - {0x0000, 0x0000, 0x0000, 0x2000, 0xbebc, 0x4019,}, - {0x0000, 0x0000, 0x0000, 0x0000, 0x9c40, 0x400c,}, - {0x0000, 0x0000, 0x0000, 0x0000, 0xc800, 0x4005,}, - {0x0000, 0x0000, 0x0000, 0x0000, 0xa000, 0x4002,}, /* 10**1 */ -}; - -static unsigned EMUSHORT emtens[NTEN + 1][NE] = -{ - {0x2de4, 0x9fde, 0xd2ce, 0x04c8, 0xa6dd, 0x0ad8,}, /* 10**-4096 */ - {0x4925, 0x2de4, 0x3436, 0x534f, 0xceae, 0x256b,}, /* 10**-2048 */ - {0x87a6, 0xc0bd, 0xda57, 0x82a5, 0xa2a6, 0x32b5,}, - {0x7133, 0xd21c, 0xdb23, 0xee32, 0x9049, 0x395a,}, - {0xfa91, 0x1939, 0x637a, 0x4325, 0xc031, 0x3cac,}, - {0xac7d, 0xe4a0, 0x64bc, 0x467c, 0xddd0, 0x3e55,}, - {0x3f24, 0xe9a5, 0xa539, 0xea27, 0xa87f, 0x3f2a,}, - {0x67de, 0x94ba, 0x4539, 0x1ead, 0xcfb1, 0x3f94,}, - {0x4c2f, 0xe15b, 0xc44d, 0x94be, 0xe695, 0x3fc9,}, - {0xfdc2, 0xcefc, 0x8461, 0x7711, 0xabcc, 0x3fe4,}, - {0xd3c3, 0x652b, 0xe219, 0x1758, 0xd1b7, 0x3ff1,}, - {0x3d71, 0xd70a, 0x70a3, 0x0a3d, 0xa3d7, 0x3ff8,}, - {0xcccd, 0xcccc, 0xcccc, 0xcccc, 0xcccc, 0x3ffb,}, /* 10**-1 */ -}; -#endif - -#if 0 -/* Convert float value X to ASCII string STRING with NDIG digits after - the decimal point. */ - -static void -e24toasc (x, string, ndigs) - unsigned EMUSHORT x[]; - char *string; - int ndigs; -{ - unsigned EMUSHORT w[NI]; - - e24toe (x, w); - etoasc (w, string, ndigs); -} - -/* Convert double value X to ASCII string STRING with NDIG digits after - the decimal point. */ - -static void -e53toasc (x, string, ndigs) - unsigned EMUSHORT x[]; - char *string; - int ndigs; -{ - unsigned EMUSHORT w[NI]; - - e53toe (x, w); - etoasc (w, string, ndigs); -} - -/* Convert double extended value X to ASCII string STRING with NDIG digits - after the decimal point. */ - -static void -e64toasc (x, string, ndigs) - unsigned EMUSHORT x[]; - char *string; - int ndigs; -{ - unsigned EMUSHORT w[NI]; - - e64toe (x, w); - etoasc (w, string, ndigs); -} - -/* Convert 128-bit long double value X to ASCII string STRING with NDIG digits - after the decimal point. */ - -static void -e113toasc (x, string, ndigs) - unsigned EMUSHORT x[]; - char *string; - int ndigs; -{ - unsigned EMUSHORT w[NI]; - - e113toe (x, w); - etoasc (w, string, ndigs); -} -#endif /* 0 */ - -/* Convert e-type X to ASCII string STRING with NDIGS digits after - the decimal point. */ - -static char wstring[80]; /* working storage for ASCII output */ - -static void -etoasc (x, string, ndigs) - unsigned EMUSHORT x[]; - char *string; - int ndigs; -{ - EMUSHORT digit; - unsigned EMUSHORT y[NI], t[NI], u[NI], w[NI]; - unsigned EMUSHORT *p, *r, *ten; - unsigned EMUSHORT sign; - int i, j, k, expon, rndsav; - char *s, *ss; - unsigned EMUSHORT m; - - - rndsav = rndprc; - ss = string; - s = wstring; - *ss = '\0'; - *s = '\0'; -#ifdef NANS - if (eisnan (x)) - { - sprintf (wstring, " NaN "); - goto bxit; - } -#endif - rndprc = NBITS; /* set to full precision */ - emov (x, y); /* retain external format */ - if (y[NE - 1] & 0x8000) - { - sign = 0xffff; - y[NE - 1] &= 0x7fff; - } - else - { - sign = 0; - } - expon = 0; - ten = &etens[NTEN][0]; - emov (eone, t); - /* Test for zero exponent */ - if (y[NE - 1] == 0) - { - for (k = 0; k < NE - 1; k++) - { - if (y[k] != 0) - goto tnzro; /* denormalized number */ - } - goto isone; /* valid all zeros */ - } - tnzro: - - /* Test for infinity. */ - if (y[NE - 1] == 0x7fff) - { - if (sign) - sprintf (wstring, " -Infinity "); - else - sprintf (wstring, " Infinity "); - goto bxit; - } - - /* Test for exponent nonzero but significand denormalized. - * This is an error condition. - */ - if ((y[NE - 1] != 0) && ((y[NE - 2] & 0x8000) == 0)) - { - mtherr ("etoasc", DOMAIN); - sprintf (wstring, "NaN"); - goto bxit; - } - - /* Compare to 1.0 */ - i = ecmp (eone, y); - if (i == 0) - goto isone; - - if (i == -2) - abort (); - - if (i < 0) - { /* Number is greater than 1 */ - /* Convert significand to an integer and strip trailing decimal zeros. */ - emov (y, u); - u[NE - 1] = EXONE + NBITS - 1; - - p = &etens[NTEN - 4][0]; - m = 16; - do - { - ediv (p, u, t); - efloor (t, w); - for (j = 0; j < NE - 1; j++) - { - if (t[j] != w[j]) - goto noint; - } - emov (t, u); - expon += (int) m; - noint: - p += NE; - m >>= 1; - } - while (m != 0); - - /* Rescale from integer significand */ - u[NE - 1] += y[NE - 1] - (unsigned int) (EXONE + NBITS - 1); - emov (u, y); - /* Find power of 10 */ - emov (eone, t); - m = MAXP; - p = &etens[0][0]; - /* An unordered compare result shouldn't happen here. */ - while (ecmp (ten, u) <= 0) - { - if (ecmp (p, u) <= 0) - { - ediv (p, u, u); - emul (p, t, t); - expon += (int) m; - } - m >>= 1; - if (m == 0) - break; - p += NE; - } - } - else - { /* Number is less than 1.0 */ - /* Pad significand with trailing decimal zeros. */ - if (y[NE - 1] == 0) - { - while ((y[NE - 2] & 0x8000) == 0) - { - emul (ten, y, y); - expon -= 1; - } - } - else - { - emovi (y, w); - for (i = 0; i < NDEC + 1; i++) - { - if ((w[NI - 1] & 0x7) != 0) - break; - /* multiply by 10 */ - emovz (w, u); - eshdn1 (u); - eshdn1 (u); - eaddm (w, u); - u[1] += 3; - while (u[2] != 0) - { - eshdn1 (u); - u[1] += 1; - } - if (u[NI - 1] != 0) - break; - if (eone[NE - 1] <= u[1]) - break; - emovz (u, w); - expon -= 1; - } - emovo (w, y); - } - k = -MAXP; - p = &emtens[0][0]; - r = &etens[0][0]; - emov (y, w); - emov (eone, t); - while (ecmp (eone, w) > 0) - { - if (ecmp (p, w) >= 0) - { - emul (r, w, w); - emul (r, t, t); - expon += k; - } - k /= 2; - if (k == 0) - break; - p += NE; - r += NE; - } - ediv (t, eone, t); - } - isone: - /* Find the first (leading) digit. */ - emovi (t, w); - emovz (w, t); - emovi (y, w); - emovz (w, y); - eiremain (t, y); - digit = equot[NI - 1]; - while ((digit == 0) && (ecmp (y, ezero) != 0)) - { - eshup1 (y); - emovz (y, u); - eshup1 (u); - eshup1 (u); - eaddm (u, y); - eiremain (t, y); - digit = equot[NI - 1]; - expon -= 1; - } - s = wstring; - if (sign) - *s++ = '-'; - else - *s++ = ' '; - /* Examine number of digits requested by caller. */ - if (ndigs < 0) - ndigs = 0; - if (ndigs > NDEC) - ndigs = NDEC; - if (digit == 10) - { - *s++ = '1'; - *s++ = '.'; - if (ndigs > 0) - { - *s++ = '0'; - ndigs -= 1; - } - expon += 1; - } - else - { - *s++ = (char)digit + '0'; - *s++ = '.'; - } - /* Generate digits after the decimal point. */ - for (k = 0; k <= ndigs; k++) - { - /* multiply current number by 10, without normalizing */ - eshup1 (y); - emovz (y, u); - eshup1 (u); - eshup1 (u); - eaddm (u, y); - eiremain (t, y); - *s++ = (char) equot[NI - 1] + '0'; - } - digit = equot[NI - 1]; - --s; - ss = s; - /* round off the ASCII string */ - if (digit > 4) - { - /* Test for critical rounding case in ASCII output. */ - if (digit == 5) - { - emovo (y, t); - if (ecmp (t, ezero) != 0) - goto roun; /* round to nearest */ -#ifndef C4X - if ((*(s - 1) & 1) == 0) - goto doexp; /* round to even */ -#endif - } - /* Round up and propagate carry-outs */ - roun: - --s; - k = *s & 0x7f; - /* Carry out to most significant digit? */ - if (k == '.') - { - --s; - k = *s; - k += 1; - *s = (char) k; - /* Most significant digit carries to 10? */ - if (k > '9') - { - expon += 1; - *s = '1'; - } - goto doexp; - } - /* Round up and carry out from less significant digits */ - k += 1; - *s = (char) k; - if (k > '9') - { - *s = '0'; - goto roun; - } - } - doexp: - /* - if (expon >= 0) - sprintf (ss, "e+%d", expon); - else - sprintf (ss, "e%d", expon); - */ - sprintf (ss, "e%d", expon); - bxit: - rndprc = rndsav; - /* copy out the working string */ - s = string; - ss = wstring; - while (*ss == ' ') /* strip possible leading space */ - ++ss; - while ((*s++ = *ss++) != '\0') - ; -} - - -/* Convert ASCII string to floating point. - - Numeric input is a free format decimal number of any length, with - or without decimal point. Entering E after the number followed by an - integer number causes the second number to be interpreted as a power of - 10 to be multiplied by the first number (i.e., "scientific" notation). */ - -/* Convert ASCII string S to single precision float value Y. */ - -static void -asctoe24 (s, y) - const char *s; - unsigned EMUSHORT *y; -{ - asctoeg (s, y, 24); -} - - -/* Convert ASCII string S to double precision value Y. */ - -static void -asctoe53 (s, y) - const char *s; - unsigned EMUSHORT *y; -{ -#if defined(DEC) || defined(IBM) - asctoeg (s, y, 56); -#else -#if defined(C4X) - asctoeg (s, y, 32); -#else - asctoeg (s, y, 53); -#endif -#endif -} - - -/* Convert ASCII string S to double extended value Y. */ - -static void -asctoe64 (s, y) - const char *s; - unsigned EMUSHORT *y; -{ - asctoeg (s, y, 64); -} - -/* Convert ASCII string S to 128-bit long double Y. */ - -static void -asctoe113 (s, y) - const char *s; - unsigned EMUSHORT *y; -{ - asctoeg (s, y, 113); -} - -/* Convert ASCII string S to e type Y. */ - -static void -asctoe (s, y) - const char *s; - unsigned EMUSHORT *y; -{ - asctoeg (s, y, NBITS); -} - -/* Convert ASCII string SS to e type Y, with a specified rounding precision - of OPREC bits. BASE is 16 for C9X hexadecimal floating constants. */ - -static void -asctoeg (ss, y, oprec) - const char *ss; - unsigned EMUSHORT *y; - int oprec; -{ - unsigned EMUSHORT yy[NI], xt[NI], tt[NI]; - int esign, decflg, sgnflg, nexp, exp, prec, lost; - int k, trail, c, rndsav; - EMULONG lexp; - unsigned EMUSHORT nsign, *p; - char *sp, *s, *lstr; - int base = 10; - - /* Copy the input string. */ - lstr = (char *) alloca (strlen (ss) + 1); - - while (*ss == ' ') /* skip leading spaces */ - ++ss; - - sp = lstr; - while ((*sp++ = *ss++) != '\0') - ; - s = lstr; - - if (s[0] == '0' && (s[1] == 'x' || s[1] == 'X')) - { - base = 16; - s += 2; - } - - rndsav = rndprc; - rndprc = NBITS; /* Set to full precision */ - lost = 0; - nsign = 0; - decflg = 0; - sgnflg = 0; - nexp = 0; - exp = 0; - prec = 0; - ecleaz (yy); - trail = 0; - - nxtcom: - if (*s >= '0' && *s <= '9') - k = *s - '0'; - else if (*s >= 'a') - k = 10 + *s - 'a'; - else - k = 10 + *s - 'A'; - if ((k >= 0) && (k < base)) - { - /* Ignore leading zeros */ - if ((prec == 0) && (decflg == 0) && (k == 0)) - goto donchr; - /* Identify and strip trailing zeros after the decimal point. */ - if ((trail == 0) && (decflg != 0)) - { - sp = s; - while ((*sp >= '0' && *sp <= '9') - || (base == 16 && ((*sp >= 'a' && *sp <= 'f') - || (*sp >= 'A' && *sp <= 'F')))) - ++sp; - /* Check for syntax error */ - c = *sp & 0x7f; - if ((base != 10 || ((c != 'e') && (c != 'E'))) - && (base != 16 || ((c != 'p') && (c != 'P'))) - && (c != '\0') - && (c != '\n') && (c != '\r') && (c != ' ') - && (c != ',')) - goto error; - --sp; - while (*sp == '0') - *sp-- = 'z'; - trail = 1; - if (*s == 'z') - goto donchr; - } - - /* If enough digits were given to more than fill up the yy register, - continuing until overflow into the high guard word yy[2] - guarantees that there will be a roundoff bit at the top - of the low guard word after normalization. */ - - if (yy[2] == 0) - { - if (base == 16) - { - if (decflg) - nexp += 4; /* count digits after decimal point */ - - eshup1 (yy); /* multiply current number by 16 */ - eshup1 (yy); - eshup1 (yy); - eshup1 (yy); - } - else - { - if (decflg) - nexp += 1; /* count digits after decimal point */ - - eshup1 (yy); /* multiply current number by 10 */ - emovz (yy, xt); - eshup1 (xt); - eshup1 (xt); - eaddm (xt, yy); - } - /* Insert the current digit. */ - ecleaz (xt); - xt[NI - 2] = (unsigned EMUSHORT) k; - eaddm (xt, yy); - } - else - { - /* Mark any lost non-zero digit. */ - lost |= k; - /* Count lost digits before the decimal point. */ - if (decflg == 0) - { - if (base == 10) - nexp -= 1; - else - nexp -= 4; - } - } - prec += 1; - goto donchr; - } - - switch (*s) - { - case 'z': - break; - case 'E': - case 'e': - case 'P': - case 'p': - goto expnt; - case '.': /* decimal point */ - if (decflg) - goto error; - ++decflg; - break; - case '-': - nsign = 0xffff; - if (sgnflg) - goto error; - ++sgnflg; - break; - case '+': - if (sgnflg) - goto error; - ++sgnflg; - break; - case ',': - case ' ': - case '\0': - case '\n': - case '\r': - goto daldone; - case 'i': - case 'I': - goto infinite; - default: - error: -#ifdef NANS - einan (yy); -#else - mtherr ("asctoe", DOMAIN); - eclear (yy); -#endif - goto aexit; - } - donchr: - ++s; - goto nxtcom; - - /* Exponent interpretation */ - expnt: - /* 0.0eXXX is zero, regardless of XXX. Check for the 0.0. */ - for (k = 0; k < NI; k++) - { - if (yy[k] != 0) - goto read_expnt; - } - goto aexit; - -read_expnt: - esign = 1; - exp = 0; - ++s; - /* check for + or - */ - if (*s == '-') - { - esign = -1; - ++s; - } - if (*s == '+') - ++s; - while ((*s >= '0') && (*s <= '9')) - { - exp *= 10; - exp += *s++ - '0'; - if (exp > 999999) - break; - } - if (esign < 0) - exp = -exp; - if ((exp > MAXDECEXP) && (base == 10)) - { - infinite: - ecleaz (yy); - yy[E] = 0x7fff; /* infinity */ - goto aexit; - } - if ((exp < MINDECEXP) && (base == 10)) - { - zero: - ecleaz (yy); - goto aexit; - } - - daldone: - if (base == 16) - { - /* Base 16 hexadecimal floating constant. */ - if ((k = enormlz (yy)) > NBITS) - { - ecleaz (yy); - goto aexit; - } - /* Adjust the exponent. NEXP is the number of hex digits, - EXP is a power of 2. */ - lexp = (EXONE - 1 + NBITS) - k + yy[E] + exp - nexp; - if (lexp > 0x7fff) - goto infinite; - if (lexp < 0) - goto zero; - yy[E] = lexp; - goto expdon; - } - - nexp = exp - nexp; - /* Pad trailing zeros to minimize power of 10, per IEEE spec. */ - while ((nexp > 0) && (yy[2] == 0)) - { - emovz (yy, xt); - eshup1 (xt); - eshup1 (xt); - eaddm (yy, xt); - eshup1 (xt); - if (xt[2] != 0) - break; - nexp -= 1; - emovz (xt, yy); - } - if ((k = enormlz (yy)) > NBITS) - { - ecleaz (yy); - goto aexit; - } - lexp = (EXONE - 1 + NBITS) - k; - emdnorm (yy, lost, 0, lexp, 64); - lost = 0; - - /* Convert to external format: - - Multiply by 10**nexp. If precision is 64 bits, - the maximum relative error incurred in forming 10**n - for 0 <= n <= 324 is 8.2e-20, at 10**180. - For 0 <= n <= 999, the peak relative error is 1.4e-19 at 10**947. - For 0 >= n >= -999, it is -1.55e-19 at 10**-435. */ - - lexp = yy[E]; - if (nexp == 0) - { - k = 0; - goto expdon; - } - esign = 1; - if (nexp < 0) - { - nexp = -nexp; - esign = -1; - if (nexp > 4096) - { - /* Punt. Can't handle this without 2 divides. */ - emovi (etens[0], tt); - lexp -= tt[E]; - k = edivm (tt, yy); - lexp += EXONE; - nexp -= 4096; - } - } - p = &etens[NTEN][0]; - emov (eone, xt); - exp = 1; - do - { - if (exp & nexp) - emul (p, xt, xt); - p -= NE; - exp = exp + exp; - } - while (exp <= MAXP); - - emovi (xt, tt); - if (esign < 0) - { - lexp -= tt[E]; - k = edivm (tt, yy); - lexp += EXONE; - } - else - { - lexp += tt[E]; - k = emulm (tt, yy); - lexp -= EXONE - 1; - } - lost = k; - - expdon: - - /* Round and convert directly to the destination type */ - if (oprec == 53) - lexp -= EXONE - 0x3ff; -#ifdef C4X - else if (oprec == 24 || oprec == 32) - lexp -= (EXONE - 0x7f); -#else -#ifdef IBM - else if (oprec == 24 || oprec == 56) - lexp -= EXONE - (0x41 << 2); -#else - else if (oprec == 24) - lexp -= EXONE - 0177; -#endif /* IBM */ -#endif /* C4X */ -#ifdef DEC - else if (oprec == 56) - lexp -= EXONE - 0201; -#endif - rndprc = oprec; - emdnorm (yy, lost, 0, lexp, 64); - - aexit: - - rndprc = rndsav; - yy[0] = nsign; - switch (oprec) - { -#ifdef DEC - case 56: - todec (yy, y); /* see etodec.c */ - break; -#endif -#ifdef IBM - case 56: - toibm (yy, y, DFmode); - break; -#endif -#ifdef C4X - case 32: - toc4x (yy, y, HFmode); - break; -#endif - - case 53: - toe53 (yy, y); - break; - case 24: - toe24 (yy, y); - break; - case 64: - toe64 (yy, y); - break; - case 113: - toe113 (yy, y); - break; - case NBITS: - emovo (yy, y); - break; - } -} - - - -/* Return Y = largest integer not greater than X (truncated toward minus - infinity). */ - -static unsigned EMUSHORT bmask[] = -{ - 0xffff, - 0xfffe, - 0xfffc, - 0xfff8, - 0xfff0, - 0xffe0, - 0xffc0, - 0xff80, - 0xff00, - 0xfe00, - 0xfc00, - 0xf800, - 0xf000, - 0xe000, - 0xc000, - 0x8000, - 0x0000, -}; - -static void -efloor (x, y) - unsigned EMUSHORT x[], y[]; -{ - register unsigned EMUSHORT *p; - int e, expon, i; - unsigned EMUSHORT f[NE]; - - emov (x, f); /* leave in external format */ - expon = (int) f[NE - 1]; - e = (expon & 0x7fff) - (EXONE - 1); - if (e <= 0) - { - eclear (y); - goto isitneg; - } - /* number of bits to clear out */ - e = NBITS - e; - emov (f, y); - if (e <= 0) - return; - - p = &y[0]; - while (e >= 16) - { - *p++ = 0; - e -= 16; - } - /* clear the remaining bits */ - *p &= bmask[e]; - /* truncate negatives toward minus infinity */ - isitneg: - - if ((unsigned EMUSHORT) expon & (unsigned EMUSHORT) 0x8000) - { - for (i = 0; i < NE - 1; i++) - { - if (f[i] != y[i]) - { - esub (eone, y, y); - break; - } - } - } -} - - -#if 0 -/* Return S and EXP such that S * 2^EXP = X and .5 <= S < 1. - For example, 1.1 = 0.55 * 2^1. */ - -static void -efrexp (x, exp, s) - unsigned EMUSHORT x[]; - int *exp; - unsigned EMUSHORT s[]; -{ - unsigned EMUSHORT xi[NI]; - EMULONG li; - - emovi (x, xi); - /* Handle denormalized numbers properly using long integer exponent. */ - li = (EMULONG) ((EMUSHORT) xi[1]); - - if (li == 0) - { - li -= enormlz (xi); - } - xi[1] = 0x3ffe; - emovo (xi, s); - *exp = (int) (li - 0x3ffe); -} -#endif - -/* Return e type Y = X * 2^PWR2. */ - -static void -eldexp (x, pwr2, y) - unsigned EMUSHORT x[]; - int pwr2; - unsigned EMUSHORT y[]; -{ - unsigned EMUSHORT xi[NI]; - EMULONG li; - int i; - - emovi (x, xi); - li = xi[1]; - li += pwr2; - i = 0; - emdnorm (xi, i, i, li, 64); - emovo (xi, y); -} - - -#if 0 -/* C = remainder after dividing B by A, all e type values. - Least significant integer quotient bits left in EQUOT. */ - -static void -eremain (a, b, c) - unsigned EMUSHORT a[], b[], c[]; -{ - unsigned EMUSHORT den[NI], num[NI]; - -#ifdef NANS - if (eisinf (b) - || (ecmp (a, ezero) == 0) - || eisnan (a) - || eisnan (b)) - { - enan (c, 0); - return; - } -#endif - if (ecmp (a, ezero) == 0) - { - mtherr ("eremain", SING); - eclear (c); - return; - } - emovi (a, den); - emovi (b, num); - eiremain (den, num); - /* Sign of remainder = sign of quotient */ - if (a[0] == b[0]) - num[0] = 0; - else - num[0] = 0xffff; - emovo (num, c); -} -#endif - -/* Return quotient of exploded e-types NUM / DEN in EQUOT, - remainder in NUM. */ - -static void -eiremain (den, num) - unsigned EMUSHORT den[], num[]; -{ - EMULONG ld, ln; - unsigned EMUSHORT j; - - ld = den[E]; - ld -= enormlz (den); - ln = num[E]; - ln -= enormlz (num); - ecleaz (equot); - while (ln >= ld) - { - if (ecmpm (den, num) <= 0) - { - esubm (den, num); - j = 1; - } - else - j = 0; - eshup1 (equot); - equot[NI - 1] |= j; - eshup1 (num); - ln -= 1; - } - emdnorm (num, 0, 0, ln, 0); -} - -/* Report an error condition CODE encountered in function NAME. - - Mnemonic Value Significance - - DOMAIN 1 argument domain error - SING 2 function singularity - OVERFLOW 3 overflow range error - UNDERFLOW 4 underflow range error - TLOSS 5 total loss of precision - PLOSS 6 partial loss of precision - INVALID 7 NaN - producing operation - EDOM 33 Unix domain error code - ERANGE 34 Unix range error code - - The order of appearance of the following messages is bound to the - error codes defined above. */ - -int merror = 0; -extern int merror; - -static void -mtherr (name, code) - const char *name; - int code; -{ - /* The string passed by the calling program is supposed to be the - name of the function in which the error occurred. - The code argument selects which error message string will be printed. */ - - if (strcmp (name, "esub") == 0) - name = "subtraction"; - else if (strcmp (name, "ediv") == 0) - name = "division"; - else if (strcmp (name, "emul") == 0) - name = "multiplication"; - else if (strcmp (name, "enormlz") == 0) - name = "normalization"; - else if (strcmp (name, "etoasc") == 0) - name = "conversion to text"; - else if (strcmp (name, "asctoe") == 0) - name = "parsing"; - else if (strcmp (name, "eremain") == 0) - name = "modulus"; - else if (strcmp (name, "esqrt") == 0) - name = "square root"; - if (extra_warnings) - { - switch (code) - { - case DOMAIN: warning ("%s: argument domain error" , name); break; - case SING: warning ("%s: function singularity" , name); break; - case OVERFLOW: warning ("%s: overflow range error" , name); break; - case UNDERFLOW: warning ("%s: underflow range error" , name); break; - case TLOSS: warning ("%s: total loss of precision" , name); break; - case PLOSS: warning ("%s: partial loss of precision", name); break; - case INVALID: warning ("%s: NaN - producing operation", name); break; - default: abort (); - } - } - - /* Set global error message word */ - merror = code + 1; -} - -#ifdef DEC -/* Convert DEC double precision D to e type E. */ - -static void -dectoe (d, e) - unsigned EMUSHORT *d; - unsigned EMUSHORT *e; -{ - unsigned EMUSHORT y[NI]; - register unsigned EMUSHORT r, *p; - - ecleaz (y); /* start with a zero */ - p = y; /* point to our number */ - r = *d; /* get DEC exponent word */ - if (*d & (unsigned int) 0x8000) - *p = 0xffff; /* fill in our sign */ - ++p; /* bump pointer to our exponent word */ - r &= 0x7fff; /* strip the sign bit */ - if (r == 0) /* answer = 0 if high order DEC word = 0 */ - goto done; - - - r >>= 7; /* shift exponent word down 7 bits */ - r += EXONE - 0201; /* subtract DEC exponent offset */ - /* add our e type exponent offset */ - *p++ = r; /* to form our exponent */ - - r = *d++; /* now do the high order mantissa */ - r &= 0177; /* strip off the DEC exponent and sign bits */ - r |= 0200; /* the DEC understood high order mantissa bit */ - *p++ = r; /* put result in our high guard word */ - - *p++ = *d++; /* fill in the rest of our mantissa */ - *p++ = *d++; - *p = *d; - - eshdn8 (y); /* shift our mantissa down 8 bits */ - done: - emovo (y, e); -} - -/* Convert e type X to DEC double precision D. */ - -static void -etodec (x, d) - unsigned EMUSHORT *x, *d; -{ - unsigned EMUSHORT xi[NI]; - EMULONG exp; - int rndsav; - - emovi (x, xi); - /* Adjust exponent for offsets. */ - exp = (EMULONG) xi[E] - (EXONE - 0201); - /* Round off to nearest or even. */ - rndsav = rndprc; - rndprc = 56; - emdnorm (xi, 0, 0, exp, 64); - rndprc = rndsav; - todec (xi, d); -} - -/* Convert exploded e-type X, that has already been rounded to - 56-bit precision, to DEC format double Y. */ - -static void -todec (x, y) - unsigned EMUSHORT *x, *y; -{ - unsigned EMUSHORT i; - unsigned EMUSHORT *p; - - p = x; - *y = 0; - if (*p++) - *y = 0100000; - i = *p++; - if (i == 0) - { - *y++ = 0; - *y++ = 0; - *y++ = 0; - *y++ = 0; - return; - } - if (i > 0377) - { - *y++ |= 077777; - *y++ = 0xffff; - *y++ = 0xffff; - *y++ = 0xffff; -#ifdef ERANGE - errno = ERANGE; -#endif - return; - } - i &= 0377; - i <<= 7; - eshup8 (x); - x[M] &= 0177; - i |= x[M]; - *y++ |= i; - *y++ = x[M + 1]; - *y++ = x[M + 2]; - *y++ = x[M + 3]; -} -#endif /* DEC */ - -#ifdef IBM -/* Convert IBM single/double precision to e type. */ - -static void -ibmtoe (d, e, mode) - unsigned EMUSHORT *d; - unsigned EMUSHORT *e; - enum machine_mode mode; -{ - unsigned EMUSHORT y[NI]; - register unsigned EMUSHORT r, *p; - int rndsav; - - ecleaz (y); /* start with a zero */ - p = y; /* point to our number */ - r = *d; /* get IBM exponent word */ - if (*d & (unsigned int) 0x8000) - *p = 0xffff; /* fill in our sign */ - ++p; /* bump pointer to our exponent word */ - r &= 0x7f00; /* strip the sign bit */ - r >>= 6; /* shift exponent word down 6 bits */ - /* in fact shift by 8 right and 2 left */ - r += EXONE - (0x41 << 2); /* subtract IBM exponent offset */ - /* add our e type exponent offset */ - *p++ = r; /* to form our exponent */ - - *p++ = *d++ & 0xff; /* now do the high order mantissa */ - /* strip off the IBM exponent and sign bits */ - if (mode != SFmode) /* there are only 2 words in SFmode */ - { - *p++ = *d++; /* fill in the rest of our mantissa */ - *p++ = *d++; - } - *p = *d; - - if (y[M] == 0 && y[M+1] == 0 && y[M+2] == 0 && y[M+3] == 0) - y[0] = y[E] = 0; - else - y[E] -= 5 + enormlz (y); /* now normalise the mantissa */ - /* handle change in RADIX */ - emovo (y, e); -} - - - -/* Convert e type to IBM single/double precision. */ - -static void -etoibm (x, d, mode) - unsigned EMUSHORT *x, *d; - enum machine_mode mode; -{ - unsigned EMUSHORT xi[NI]; - EMULONG exp; - int rndsav; - - emovi (x, xi); - exp = (EMULONG) xi[E] - (EXONE - (0x41 << 2)); /* adjust exponent for offsets */ - /* round off to nearest or even */ - rndsav = rndprc; - rndprc = 56; - emdnorm (xi, 0, 0, exp, 64); - rndprc = rndsav; - toibm (xi, d, mode); -} - -static void -toibm (x, y, mode) - unsigned EMUSHORT *x, *y; - enum machine_mode mode; -{ - unsigned EMUSHORT i; - unsigned EMUSHORT *p; - int r; - - p = x; - *y = 0; - if (*p++) - *y = 0x8000; - i = *p++; - if (i == 0) - { - *y++ = 0; - *y++ = 0; - if (mode != SFmode) - { - *y++ = 0; - *y++ = 0; - } - return; - } - r = i & 0x3; - i >>= 2; - if (i > 0x7f) - { - *y++ |= 0x7fff; - *y++ = 0xffff; - if (mode != SFmode) - { - *y++ = 0xffff; - *y++ = 0xffff; - } -#ifdef ERANGE - errno = ERANGE; -#endif - return; - } - i &= 0x7f; - *y |= (i << 8); - eshift (x, r + 5); - *y++ |= x[M]; - *y++ = x[M + 1]; - if (mode != SFmode) - { - *y++ = x[M + 2]; - *y++ = x[M + 3]; - } -} -#endif /* IBM */ - - -#ifdef C4X -/* Convert C4X single/double precision to e type. */ - -static void -c4xtoe (d, e, mode) - unsigned EMUSHORT *d; - unsigned EMUSHORT *e; - enum machine_mode mode; -{ - unsigned EMUSHORT y[NI]; - int r; - int isnegative; - int size; - int i; - int carry; - - /* Short-circuit the zero case. */ - if ((d[0] == 0x8000) - && (d[1] == 0x0000) - && ((mode == QFmode) || ((d[2] == 0x0000) && (d[3] == 0x0000)))) - { - e[0] = 0; - e[1] = 0; - e[2] = 0; - e[3] = 0; - e[4] = 0; - e[5] = 0; - return; - } - - ecleaz (y); /* start with a zero */ - r = d[0]; /* get sign/exponent part */ - if (r & (unsigned int) 0x0080) - { - y[0] = 0xffff; /* fill in our sign */ - isnegative = TRUE; - } - else - { - isnegative = FALSE; - } - - r >>= 8; /* Shift exponent word down 8 bits. */ - if (r & 0x80) /* Make the exponent negative if it is. */ - { - r = r | (~0 & ~0xff); - } - - if (isnegative) - { - /* Now do the high order mantissa. We don't "or" on the high bit - because it is 2 (not 1) and is handled a little differently - below. */ - y[M] = d[0] & 0x7f; - - y[M+1] = d[1]; - if (mode != QFmode) /* There are only 2 words in QFmode. */ - { - y[M+2] = d[2]; /* Fill in the rest of our mantissa. */ - y[M+3] = d[3]; - size = 4; - } - else - { - size = 2; - } - eshift(y, -8); - - /* Now do the two's complement on the data. */ - - carry = 1; /* Initially add 1 for the two's complement. */ - for (i=size + M; i > M; i--) - { - if (carry && (y[i] == 0x0000)) - { - /* We overflowed into the next word, carry is the same. */ - y[i] = carry ? 0x0000 : 0xffff; - } - else - { - /* No overflow, just invert and add carry. */ - y[i] = ((~y[i]) + carry) & 0xffff; - carry = 0; - } - } - - if (carry) - { - eshift(y, -1); - y[M+1] |= 0x8000; - r++; - } - y[1] = r + EXONE; - } - else - { - /* Add our e type exponent offset to form our exponent. */ - r += EXONE; - y[1] = r; - - /* Now do the high order mantissa strip off the exponent and sign - bits and add the high 1 bit. */ - y[M] = (d[0] & 0x7f) | 0x80; - - y[M+1] = d[1]; - if (mode != QFmode) /* There are only 2 words in QFmode. */ - { - y[M+2] = d[2]; /* Fill in the rest of our mantissa. */ - y[M+3] = d[3]; - } - eshift(y, -8); - } - - emovo (y, e); -} - - -/* Convert e type to C4X single/double precision. */ - -static void -etoc4x (x, d, mode) - unsigned EMUSHORT *x, *d; - enum machine_mode mode; -{ - unsigned EMUSHORT xi[NI]; - EMULONG exp; - int rndsav; - - emovi (x, xi); - - /* Adjust exponent for offsets. */ - exp = (EMULONG) xi[E] - (EXONE - 0x7f); - - /* Round off to nearest or even. */ - rndsav = rndprc; - rndprc = mode == QFmode ? 24 : 32; - emdnorm (xi, 0, 0, exp, 64); - rndprc = rndsav; - toc4x (xi, d, mode); -} - -static void -toc4x (x, y, mode) - unsigned EMUSHORT *x, *y; - enum machine_mode mode; -{ - int i; - int v; - int carry; - - /* Short-circuit the zero case */ - if ((x[0] == 0) /* Zero exponent and sign */ - && (x[1] == 0) - && (x[M] == 0) /* The rest is for zero mantissa */ - && (x[M+1] == 0) - /* Only check for double if necessary */ - && ((mode == QFmode) || ((x[M+2] == 0) && (x[M+3] == 0)))) - { - /* We have a zero. Put it into the output and return. */ - *y++ = 0x8000; - *y++ = 0x0000; - if (mode != QFmode) - { - *y++ = 0x0000; - *y++ = 0x0000; - } - return; - } - - *y = 0; - - /* Negative number require a two's complement conversion of the - mantissa. */ - if (x[0]) - { - *y = 0x0080; - - i = ((int) x[1]) - 0x7f; - - /* Now add 1 to the inverted data to do the two's complement. */ - if (mode != QFmode) - v = 4 + M; - else - v = 2 + M; - carry = 1; - while (v > M) - { - if (x[v] == 0x0000) - { - x[v] = carry ? 0x0000 : 0xffff; - } - else - { - x[v] = ((~x[v]) + carry) & 0xffff; - carry = 0; - } - v--; - } - - /* The following is a special case. The C4X negative float requires - a zero in the high bit (because the format is (2 - x) x 2^m), so - if a one is in that bit, we have to shift left one to get rid - of it. This only occurs if the number is -1 x 2^m. */ - if (x[M+1] & 0x8000) - { - /* This is the case of -1 x 2^m, we have to rid ourselves of the - high sign bit and shift the exponent. */ - eshift(x, 1); - i--; - } - } - else - { - i = ((int) x[1]) - 0x7f; - } - - if ((i < -128) || (i > 127)) - { - y[0] |= 0xff7f; - y[1] = 0xffff; - if (mode != QFmode) - { - y[2] = 0xffff; - y[3] = 0xffff; - } -#ifdef ERANGE - errno = ERANGE; -#endif - return; - } - - y[0] |= ((i & 0xff) << 8); - - eshift (x, 8); - - y[0] |= x[M] & 0x7f; - y[1] = x[M + 1]; - if (mode != QFmode) - { - y[2] = x[M + 2]; - y[3] = x[M + 3]; - } -} -#endif /* C4X */ - -/* Output a binary NaN bit pattern in the target machine's format. */ - -/* If special NaN bit patterns are required, define them in tm.h - as arrays of unsigned 16-bit shorts. Otherwise, use the default - patterns here. */ -#ifdef TFMODE_NAN -TFMODE_NAN; -#else -#ifdef IEEE -unsigned EMUSHORT TFbignan[8] = - {0x7fff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff}; -unsigned EMUSHORT TFlittlenan[8] = {0, 0, 0, 0, 0, 0, 0x8000, 0xffff}; -#endif -#endif - -#ifdef XFMODE_NAN -XFMODE_NAN; -#else -#ifdef IEEE -unsigned EMUSHORT XFbignan[6] = - {0x7fff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff}; -unsigned EMUSHORT XFlittlenan[6] = {0, 0, 0, 0xc000, 0xffff, 0}; -#endif -#endif - -#ifdef DFMODE_NAN -DFMODE_NAN; -#else -#ifdef IEEE -unsigned EMUSHORT DFbignan[4] = {0x7fff, 0xffff, 0xffff, 0xffff}; -unsigned EMUSHORT DFlittlenan[4] = {0, 0, 0, 0xfff8}; -#endif -#endif - -#ifdef SFMODE_NAN -SFMODE_NAN; -#else -#ifdef IEEE -unsigned EMUSHORT SFbignan[2] = {0x7fff, 0xffff}; -unsigned EMUSHORT SFlittlenan[2] = {0, 0xffc0}; -#endif -#endif - - -static void -make_nan (nan, sign, mode) - unsigned EMUSHORT *nan; - int sign; - enum machine_mode mode; -{ - int n; - unsigned EMUSHORT *p; - - switch (mode) - { -/* Possibly the `reserved operand' patterns on a VAX can be - used like NaN's, but probably not in the same way as IEEE. */ -#if !defined(DEC) && !defined(IBM) && !defined(C4X) - case TFmode: - n = 8; - if (REAL_WORDS_BIG_ENDIAN) - p = TFbignan; - else - p = TFlittlenan; - break; - - case XFmode: - n = 6; - if (REAL_WORDS_BIG_ENDIAN) - p = XFbignan; - else - p = XFlittlenan; - break; - - case DFmode: - n = 4; - if (REAL_WORDS_BIG_ENDIAN) - p = DFbignan; - else - p = DFlittlenan; - break; - - case SFmode: - case HFmode: - n = 2; - if (REAL_WORDS_BIG_ENDIAN) - p = SFbignan; - else - p = SFlittlenan; - break; -#endif - - default: - abort (); - } - if (REAL_WORDS_BIG_ENDIAN) - *nan++ = (sign << 15) | (*p++ & 0x7fff); - while (--n != 0) - *nan++ = *p++; - if (! REAL_WORDS_BIG_ENDIAN) - *nan = (sign << 15) | (*p & 0x7fff); -} - -/* This is the inverse of the function `etarsingle' invoked by - REAL_VALUE_TO_TARGET_SINGLE. */ - -REAL_VALUE_TYPE -ereal_unto_float (f) - long f; -{ - REAL_VALUE_TYPE r; - unsigned EMUSHORT s[2]; - unsigned EMUSHORT e[NE]; - - /* Convert 32 bit integer to array of 16 bit pieces in target machine order. - This is the inverse operation to what the function `endian' does. */ - if (REAL_WORDS_BIG_ENDIAN) - { - s[0] = (unsigned EMUSHORT) (f >> 16); - s[1] = (unsigned EMUSHORT) f; - } - else - { - s[0] = (unsigned EMUSHORT) f; - s[1] = (unsigned EMUSHORT) (f >> 16); - } - /* Convert and promote the target float to E-type. */ - e24toe (s, e); - /* Output E-type to REAL_VALUE_TYPE. */ - PUT_REAL (e, &r); - return r; -} - - -/* This is the inverse of the function `etardouble' invoked by - REAL_VALUE_TO_TARGET_DOUBLE. */ - -REAL_VALUE_TYPE -ereal_unto_double (d) - long d[]; -{ - REAL_VALUE_TYPE r; - unsigned EMUSHORT s[4]; - unsigned EMUSHORT e[NE]; - - /* Convert array of HOST_WIDE_INT to equivalent array of 16-bit pieces. */ - if (REAL_WORDS_BIG_ENDIAN) - { - s[0] = (unsigned EMUSHORT) (d[0] >> 16); - s[1] = (unsigned EMUSHORT) d[0]; - s[2] = (unsigned EMUSHORT) (d[1] >> 16); - s[3] = (unsigned EMUSHORT) d[1]; - } - else - { - /* Target float words are little-endian. */ - s[0] = (unsigned EMUSHORT) d[0]; - s[1] = (unsigned EMUSHORT) (d[0] >> 16); - s[2] = (unsigned EMUSHORT) d[1]; - s[3] = (unsigned EMUSHORT) (d[1] >> 16); - } - /* Convert target double to E-type. */ - e53toe (s, e); - /* Output E-type to REAL_VALUE_TYPE. */ - PUT_REAL (e, &r); - return r; -} - - -/* Convert an SFmode target `float' value to a REAL_VALUE_TYPE. - This is somewhat like ereal_unto_float, but the input types - for these are different. */ - -REAL_VALUE_TYPE -ereal_from_float (f) - HOST_WIDE_INT f; -{ - REAL_VALUE_TYPE r; - unsigned EMUSHORT s[2]; - unsigned EMUSHORT e[NE]; - - /* Convert 32 bit integer to array of 16 bit pieces in target machine order. - This is the inverse operation to what the function `endian' does. */ - if (REAL_WORDS_BIG_ENDIAN) - { - s[0] = (unsigned EMUSHORT) (f >> 16); - s[1] = (unsigned EMUSHORT) f; - } - else - { - s[0] = (unsigned EMUSHORT) f; - s[1] = (unsigned EMUSHORT) (f >> 16); - } - /* Convert and promote the target float to E-type. */ - e24toe (s, e); - /* Output E-type to REAL_VALUE_TYPE. */ - PUT_REAL (e, &r); - return r; -} - - -/* Convert a DFmode target `double' value to a REAL_VALUE_TYPE. - This is somewhat like ereal_unto_double, but the input types - for these are different. - - The DFmode is stored as an array of HOST_WIDE_INT in the target's - data format, with no holes in the bit packing. The first element - of the input array holds the bits that would come first in the - target computer's memory. */ - -REAL_VALUE_TYPE -ereal_from_double (d) - HOST_WIDE_INT d[]; -{ - REAL_VALUE_TYPE r; - unsigned EMUSHORT s[4]; - unsigned EMUSHORT e[NE]; - - /* Convert array of HOST_WIDE_INT to equivalent array of 16-bit pieces. */ - if (REAL_WORDS_BIG_ENDIAN) - { -#if HOST_BITS_PER_WIDE_INT == 32 - s[0] = (unsigned EMUSHORT) (d[0] >> 16); - s[1] = (unsigned EMUSHORT) d[0]; - s[2] = (unsigned EMUSHORT) (d[1] >> 16); - s[3] = (unsigned EMUSHORT) d[1]; -#else - /* In this case the entire target double is contained in the - first array element. The second element of the input is - ignored. */ - s[0] = (unsigned EMUSHORT) (d[0] >> 48); - s[1] = (unsigned EMUSHORT) (d[0] >> 32); - s[2] = (unsigned EMUSHORT) (d[0] >> 16); - s[3] = (unsigned EMUSHORT) d[0]; -#endif - } - else - { - /* Target float words are little-endian. */ - s[0] = (unsigned EMUSHORT) d[0]; - s[1] = (unsigned EMUSHORT) (d[0] >> 16); -#if HOST_BITS_PER_WIDE_INT == 32 - s[2] = (unsigned EMUSHORT) d[1]; - s[3] = (unsigned EMUSHORT) (d[1] >> 16); -#else - s[2] = (unsigned EMUSHORT) (d[0] >> 32); - s[3] = (unsigned EMUSHORT) (d[0] >> 48); -#endif - } - /* Convert target double to E-type. */ - e53toe (s, e); - /* Output E-type to REAL_VALUE_TYPE. */ - PUT_REAL (e, &r); - return r; -} - - -#if 0 -/* Convert target computer unsigned 64-bit integer to e-type. - The endian-ness of DImode follows the convention for integers, - so we use WORDS_BIG_ENDIAN here, not REAL_WORDS_BIG_ENDIAN. */ - -static void -uditoe (di, e) - unsigned EMUSHORT *di; /* Address of the 64-bit int. */ - unsigned EMUSHORT *e; -{ - unsigned EMUSHORT yi[NI]; - int k; - - ecleaz (yi); - if (WORDS_BIG_ENDIAN) - { - for (k = M; k < M + 4; k++) - yi[k] = *di++; - } - else - { - for (k = M + 3; k >= M; k--) - yi[k] = *di++; - } - yi[E] = EXONE + 47; /* exponent if normalize shift count were 0 */ - if ((k = enormlz (yi)) > NBITS)/* normalize the significand */ - ecleaz (yi); /* it was zero */ - else - yi[E] -= (unsigned EMUSHORT) k;/* subtract shift count from exponent */ - emovo (yi, e); -} - -/* Convert target computer signed 64-bit integer to e-type. */ - -static void -ditoe (di, e) - unsigned EMUSHORT *di; /* Address of the 64-bit int. */ - unsigned EMUSHORT *e; -{ - unsigned EMULONG acc; - unsigned EMUSHORT yi[NI]; - unsigned EMUSHORT carry; - int k, sign; - - ecleaz (yi); - if (WORDS_BIG_ENDIAN) - { - for (k = M; k < M + 4; k++) - yi[k] = *di++; - } - else - { - for (k = M + 3; k >= M; k--) - yi[k] = *di++; - } - /* Take absolute value */ - sign = 0; - if (yi[M] & 0x8000) - { - sign = 1; - carry = 0; - for (k = M + 3; k >= M; k--) - { - acc = (unsigned EMULONG) (~yi[k] & 0xffff) + carry; - yi[k] = acc; - carry = 0; - if (acc & 0x10000) - carry = 1; - } - } - yi[E] = EXONE + 47; /* exponent if normalize shift count were 0 */ - if ((k = enormlz (yi)) > NBITS)/* normalize the significand */ - ecleaz (yi); /* it was zero */ - else - yi[E] -= (unsigned EMUSHORT) k;/* subtract shift count from exponent */ - emovo (yi, e); - if (sign) - eneg (e); -} - - -/* Convert e-type to unsigned 64-bit int. */ - -static void -etoudi (x, i) - unsigned EMUSHORT *x; - unsigned EMUSHORT *i; -{ - unsigned EMUSHORT xi[NI]; - int j, k; - - emovi (x, xi); - if (xi[0]) - { - xi[M] = 0; - goto noshift; - } - k = (int) xi[E] - (EXONE - 1); - if (k <= 0) - { - for (j = 0; j < 4; j++) - *i++ = 0; - return; - } - if (k > 64) - { - for (j = 0; j < 4; j++) - *i++ = 0xffff; - if (extra_warnings) - warning ("overflow on truncation to integer"); - return; - } - if (k > 16) - { - /* Shift more than 16 bits: first shift up k-16 mod 16, - then shift up by 16's. */ - j = k - ((k >> 4) << 4); - if (j == 0) - j = 16; - eshift (xi, j); - if (WORDS_BIG_ENDIAN) - *i++ = xi[M]; - else - { - i += 3; - *i-- = xi[M]; - } - k -= j; - do - { - eshup6 (xi); - if (WORDS_BIG_ENDIAN) - *i++ = xi[M]; - else - *i-- = xi[M]; - } - while ((k -= 16) > 0); - } - else - { - /* shift not more than 16 bits */ - eshift (xi, k); - -noshift: - - if (WORDS_BIG_ENDIAN) - { - i += 3; - *i-- = xi[M]; - *i-- = 0; - *i-- = 0; - *i = 0; - } - else - { - *i++ = xi[M]; - *i++ = 0; - *i++ = 0; - *i = 0; - } - } -} - - -/* Convert e-type to signed 64-bit int. */ - -static void -etodi (x, i) - unsigned EMUSHORT *x; - unsigned EMUSHORT *i; -{ - unsigned EMULONG acc; - unsigned EMUSHORT xi[NI]; - unsigned EMUSHORT carry; - unsigned EMUSHORT *isave; - int j, k; - - emovi (x, xi); - k = (int) xi[E] - (EXONE - 1); - if (k <= 0) - { - for (j = 0; j < 4; j++) - *i++ = 0; - return; - } - if (k > 64) - { - for (j = 0; j < 4; j++) - *i++ = 0xffff; - if (extra_warnings) - warning ("overflow on truncation to integer"); - return; - } - isave = i; - if (k > 16) - { - /* Shift more than 16 bits: first shift up k-16 mod 16, - then shift up by 16's. */ - j = k - ((k >> 4) << 4); - if (j == 0) - j = 16; - eshift (xi, j); - if (WORDS_BIG_ENDIAN) - *i++ = xi[M]; - else - { - i += 3; - *i-- = xi[M]; - } - k -= j; - do - { - eshup6 (xi); - if (WORDS_BIG_ENDIAN) - *i++ = xi[M]; - else - *i-- = xi[M]; - } - while ((k -= 16) > 0); - } - else - { - /* shift not more than 16 bits */ - eshift (xi, k); - - if (WORDS_BIG_ENDIAN) - { - i += 3; - *i = xi[M]; - *i-- = 0; - *i-- = 0; - *i = 0; - } - else - { - *i++ = xi[M]; - *i++ = 0; - *i++ = 0; - *i = 0; - } - } - /* Negate if negative */ - if (xi[0]) - { - carry = 0; - if (WORDS_BIG_ENDIAN) - isave += 3; - for (k = 0; k < 4; k++) - { - acc = (unsigned EMULONG) (~(*isave) & 0xffff) + carry; - if (WORDS_BIG_ENDIAN) - *isave-- = acc; - else - *isave++ = acc; - carry = 0; - if (acc & 0x10000) - carry = 1; - } - } -} - - -/* Longhand square root routine. */ - - -static int esqinited = 0; -static unsigned short sqrndbit[NI]; - -static void -esqrt (x, y) - unsigned EMUSHORT *x, *y; -{ - unsigned EMUSHORT temp[NI], num[NI], sq[NI], xx[NI]; - EMULONG m, exp; - int i, j, k, n, nlups; - - if (esqinited == 0) - { - ecleaz (sqrndbit); - sqrndbit[NI - 2] = 1; - esqinited = 1; - } - /* Check for arg <= 0 */ - i = ecmp (x, ezero); - if (i <= 0) - { - if (i == -1) - { - mtherr ("esqrt", DOMAIN); - eclear (y); - } - else - emov (x, y); - return; - } - -#ifdef INFINITY - if (eisinf (x)) - { - eclear (y); - einfin (y); - return; - } -#endif - /* Bring in the arg and renormalize if it is denormal. */ - emovi (x, xx); - m = (EMULONG) xx[1]; /* local long word exponent */ - if (m == 0) - m -= enormlz (xx); - - /* Divide exponent by 2 */ - m -= 0x3ffe; - exp = (unsigned short) ((m / 2) + 0x3ffe); - - /* Adjust if exponent odd */ - if ((m & 1) != 0) - { - if (m > 0) - exp += 1; - eshdn1 (xx); - } - - ecleaz (sq); - ecleaz (num); - n = 8; /* get 8 bits of result per inner loop */ - nlups = rndprc; - j = 0; - - while (nlups > 0) - { - /* bring in next word of arg */ - if (j < NE) - num[NI - 1] = xx[j + 3]; - /* Do additional bit on last outer loop, for roundoff. */ - if (nlups <= 8) - n = nlups + 1; - for (i = 0; i < n; i++) - { - /* Next 2 bits of arg */ - eshup1 (num); - eshup1 (num); - /* Shift up answer */ - eshup1 (sq); - /* Make trial divisor */ - for (k = 0; k < NI; k++) - temp[k] = sq[k]; - eshup1 (temp); - eaddm (sqrndbit, temp); - /* Subtract and insert answer bit if it goes in */ - if (ecmpm (temp, num) <= 0) - { - esubm (temp, num); - sq[NI - 2] |= 1; - } - } - nlups -= n; - j += 1; - } - - /* Adjust for extra, roundoff loop done. */ - exp += (NBITS - 1) - rndprc; - - /* Sticky bit = 1 if the remainder is nonzero. */ - k = 0; - for (i = 3; i < NI; i++) - k |= (int) num[i]; - - /* Renormalize and round off. */ - emdnorm (sq, k, 0, exp, 64); - emovo (sq, y); -} -#endif -#endif /* EMU_NON_COMPILE not defined */ - -/* Return the binary precision of the significand for a given - floating point mode. The mode can hold an integer value - that many bits wide, without losing any bits. */ - -int -significand_size (mode) - enum machine_mode mode; -{ - -/* Don't test the modes, but their sizes, lest this - code won't work for BITS_PER_UNIT != 8 . */ - -switch (GET_MODE_BITSIZE (mode)) - { - case 32: - -#if TARGET_FLOAT_FORMAT == C4X_FLOAT_FORMAT - return 56; -#endif - - return 24; - - case 64: -#if TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT - return 53; -#else -#if TARGET_FLOAT_FORMAT == IBM_FLOAT_FORMAT - return 56; -#else -#if TARGET_FLOAT_FORMAT == VAX_FLOAT_FORMAT - return 56; -#else -#if TARGET_FLOAT_FORMAT == C4X_FLOAT_FORMAT - return 56; -#else - abort (); -#endif -#endif -#endif -#endif - - case 96: - return 64; - case 128: - return 113; - - default: - abort (); - } -} |