diff options
Diffstat (limited to 'contrib/wpa/wpa_supplicant/config.h')
| -rw-r--r-- | contrib/wpa/wpa_supplicant/config.h | 201 |
1 files changed, 200 insertions, 1 deletions
diff --git a/contrib/wpa/wpa_supplicant/config.h b/contrib/wpa/wpa_supplicant/config.h index 48e64be5da1a..abbd8c90e2b5 100644 --- a/contrib/wpa/wpa_supplicant/config.h +++ b/contrib/wpa/wpa_supplicant/config.h @@ -32,6 +32,7 @@ #define DEFAULT_BSS_EXPIRATION_AGE 180 #define DEFAULT_BSS_EXPIRATION_SCAN_COUNT 2 #define DEFAULT_MAX_NUM_STA 128 +#define DEFAULT_AP_ISOLATE 0 #define DEFAULT_ACCESS_NETWORK_TYPE 15 #define DEFAULT_SCAN_CUR_FREQ 0 #define DEFAULT_P2P_SEARCH_DELAY 500 @@ -41,6 +42,8 @@ #define DEFAULT_P2P_GO_CTWINDOW 0 #define DEFAULT_WPA_RSC_RELAXATION 1 #define DEFAULT_MBO_CELL_CAPA MBO_CELL_CAPA_NOT_SUPPORTED +#define DEFAULT_DISASSOC_IMMINENT_RSSI_THRESHOLD -75 +#define DEFAULT_OCE_SUPPORT OCE_STA #include "config_ssid.h" #include "wps/wps.h" @@ -48,6 +51,9 @@ #include "common/ieee802_11_common.h" +#define MAX_ROAMING_CONS 36 +#define MAX_ROAMING_CONS_OI_LEN 15 + struct wpa_cred { /** * next - Next credential in the list @@ -222,10 +228,43 @@ struct wpa_cred { */ size_t roaming_consortium_len; + /** + * required_roaming_consortium - Required Roaming Consortium OI + * + * If required_roaming_consortium_len is non-zero, this field contains + * the Roaming Consortium OI that is required to be advertised by the AP + * for the credential to be considered matching. + */ u8 required_roaming_consortium[15]; + + /** + * required_roaming_consortium_len - Length of required_roaming_consortium + */ size_t required_roaming_consortium_len; /** + * roaming_consortiums - Roaming Consortium OI(s) memberships + * + * This field contains one or more OIs identifying the roaming + * consortiums of which the provider is a member. The list is sorted + * from the most preferred one to the least preferred one. A match + * between the Roaming Consortium OIs advertised by an AP and the OIs + * in this list indicates that successful authentication is possible. + * (Hotspot 2.0 PerProviderSubscription/<X+>/HomeSP/RoamingConsortiumOI) + */ + u8 roaming_consortiums[MAX_ROAMING_CONS][MAX_ROAMING_CONS_OI_LEN]; + + /** + * roaming_consortiums_len - Length on roaming_consortiums[i] + */ + size_t roaming_consortiums_len[MAX_ROAMING_CONS]; + + /** + * num_roaming_consortiums - Number of entries in roaming_consortiums + */ + unsigned int num_roaming_consortiums; + + /** * eap_method - EAP method to use * * Pre-configured EAP method to use with this credential or %NULL to @@ -334,6 +373,7 @@ struct wpa_cred { #define CFG_CHANGED_NFC_PASSWORD_TOKEN BIT(15) #define CFG_CHANGED_P2P_PASSPHRASE_LEN BIT(16) #define CFG_CHANGED_SCHED_SCAN_PLANS BIT(17) +#define CFG_CHANGED_WOWLAN_TRIGGERS BIT(18) /** * struct wpa_config - wpa_supplicant configuration data @@ -625,6 +665,13 @@ struct wpa_config { u8 uuid[16]; /** + * auto_uuid - Automatic UUID behavior + * 0 = generate static value based on the local MAC address (default) + * 1 = generate a random UUID every time wpa_supplicant starts + */ + int auto_uuid; + + /** * device_name - Device Name (WPS) * User-friendly description of device; up to 32 octets encoded in * UTF-8 @@ -698,6 +745,16 @@ struct wpa_config { */ int wps_cred_processing; + /** + * wps_cred_add_sae - Whether to enable SAE automatically for WPS + * + * 0 = only add the explicitly listed WPA2-PSK configuration + * 1 = add both the WPA2-PSK and SAE configuration and enable PMF so + * that the station gets configured in WPA3-Personal transition mode + * (supports both WPA2-Personal (PSK) and WPA3-Personal (SAE) APs). + */ + int wps_cred_add_sae; + #define MAX_SEC_DEVICE_TYPES 5 /** * sec_device_types - Secondary Device Types (P2P) @@ -833,6 +890,20 @@ struct wpa_config { unsigned int max_num_sta; /** + * ap_isolate - Whether to use client isolation feature + * + * Client isolation can be used to prevent low-level bridging of + * frames between associated stations in the BSS. By default, + * this bridging is allowed (ap_isolate=0); except in P2P GO case, + * where p2p_intra_bss parameter is used to determine whether to allow + * intra-BSS forwarding (ap_isolate = !p2p_intra_bss). + * + * 0 = do not enable AP isolation + * 1 = enable AP isolation + */ + int ap_isolate; + + /** * freq_list - Array of allowed scan frequencies or %NULL for all * * This is an optional zero-terminated array of frequencies in @@ -854,7 +925,7 @@ struct wpa_config { unsigned int changed_parameters; /** - * disassoc_low_ack - Disassocicate stations with massive packet loss + * disassoc_low_ack - Disassociate stations with massive packet loss */ int disassoc_low_ack; @@ -872,6 +943,34 @@ struct wpa_config { */ int access_network_type; + /** + * go_interworking - Whether Interworking for P2P GO is enabled + */ + int go_interworking; + + /** + * go_access_network_type - P2P GO Access Network Type + * + * This indicates which access network type to advertise if Interworking + * is enabled for P2P GO. + */ + int go_access_network_type; + + /** + * go_internet - Interworking: Internet connectivity (0 or 1) + */ + int go_internet; + + /** + * go_venue_group - Interworking: Venue group + */ + int go_venue_group; + + /** + * go_venue_type: Interworking: Venue type + */ + int go_venue_type; + /** * hessid - Homogenous ESS identifier * @@ -990,6 +1089,16 @@ struct wpa_config { int p2p_go_vht; /** + * p2p_go_he - Default mode for 11ax HE enable when operating as GO + * + * This will take effect for p2p_group_add, p2p_connect, and p2p_invite. + * Note that regulatory constraints and driver capabilities are + * consulted anyway, so setting it to 1 can't do real harm. + * By default: 0 (disabled) + */ + int p2p_go_he; + + /** * p2p_go_ctwindow - CTWindow to use when operating as GO * * By default: 0 (no CTWindow). Values 0-127 can be used to indicate @@ -1096,6 +1205,15 @@ struct wpa_config { unsigned int sched_scan_interval; /** + * sched_scan_start_delay - Schedule scan start delay before first scan + * + * Delay (in seconds) before scheduling first scan plan cycle. The + * driver may ignore this parameter and start immediately (or at any + * other time), if this feature is not supported. + */ + unsigned int sched_scan_start_delay; + + /** * tdls_external_control - External control for TDLS setup requests * * Enable TDLS mode where external programs are given the control @@ -1291,6 +1409,19 @@ struct wpa_config { * mbo_cell_capa - Cellular capabilities for MBO */ enum mbo_cellular_capa mbo_cell_capa; + + /** + * disassoc_imminent_rssi_threshold - RSSI threshold of candidate AP + * when disassociation imminent is set. + */ + int disassoc_imminent_rssi_threshold; + + /** + * oce - Enable OCE in STA and/or STA-CFON mode + * - Set BIT(0) to enable OCE in non-AP STA mode + * - Set BIT(1) to enable OCE in STA-CFON mode + */ + unsigned int oce; #endif /* CONFIG_MBO */ /** @@ -1328,6 +1459,74 @@ struct wpa_config { * wpa_supplicant. */ int ftm_initiator; + + /** + * gas_rand_addr_lifetime - Lifetime of random MAC address for ANQP in + * seconds + */ + unsigned int gas_rand_addr_lifetime; + + /** + * gas_rand_mac_addr - GAS MAC address policy + * + * 0 = use permanent MAC address + * 1 = use random MAC address + * 2 = like 1, but maintain OUI (with local admin bit set) + */ + int gas_rand_mac_addr; + + /** + * dpp_config_processing - How to process DPP configuration + * + * 0 = report received configuration to an external program for + * processing; do not generate any network profile internally + * 1 = report received configuration to an external program and generate + * a network profile internally, but do not automatically connect + * to the created (disabled) profile; the network profile id is + * reported to external programs + * 2 = report received configuration to an external program, generate + * a network profile internally, try to connect to the created + * profile automatically + */ + int dpp_config_processing; + + /** + * coloc_intf_reporting - Colocated interference reporting + * + * dot11CoLocIntfReportingActivated + * 0 = disabled (false) + * 1 = enabled (true) + */ + int coloc_intf_reporting; + + /** + * p2p_device_random_mac_addr - P2P Device MAC address policy default + * + * 0 = use permanent MAC address + * 1 = use random MAC address on creating the interface if there is no + * persistent groups. + * + * By default, permanent MAC address is used. + */ + int p2p_device_random_mac_addr; + + /** + * p2p_device_persistent_mac_addr - Record last used MAC address + * + * If there are saved persistent groups, P2P cannot generate another + * random MAC address, and need to restore to last used MAC address. + */ + u8 p2p_device_persistent_mac_addr[ETH_ALEN]; + + /** + * p2p_interface_random_mac_addr - P2P Interface MAC address policy default + * + * 0 = use permanent MAC address + * 1 = use random MAC address on creating the interface. + * + * By default, permanent MAC address is used. + */ + int p2p_interface_random_mac_addr; }; |