diff options
Diffstat (limited to 'gnu/gas/Makefile.gnu')
| -rw-r--r-- | gnu/gas/Makefile.gnu | 356 |
1 files changed, 0 insertions, 356 deletions
diff --git a/gnu/gas/Makefile.gnu b/gnu/gas/Makefile.gnu deleted file mode 100644 index 4b81b0c1adf1..000000000000 --- a/gnu/gas/Makefile.gnu +++ /dev/null @@ -1,356 +0,0 @@ -# Makefile for GAS. -# Copyright (C) 1989, Free Software Foundation -# -# This file is part of GAS, the GNU Assembler. -# -# GAS is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 1, or (at your option) -# any later version. -# -# GAS is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GAS; see the file COPYING. If not, write to -# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - -# This makefile may be used to make the VAX, 68020, 80386, -# SPARC, ns32k, or i860 assembler(s). - -BINDIR = /usr/local/bin -#CC=gcc - -# If you are on a BSD system, un-comment the next two lines, and comment out -# the lines for SystemV and HPUX below -G0 = -g -I. #-O -Wall -LDFLAGS = $(CFLAGS) -# -# To compile gas on a System Five machine, comment out the two lines above -# and un-comment out the next three lines -# Comment out the -lPW on the LOADLIBES line if you are using GCC. -# G0 = -g -I. -DUSG -# LDFLAGS = $(CFLAGS) -# LOADLIBES = -lmalloc -lPW -# -# To compile gas for HPUX, link m-hpux.h to m68k.h , and un-comment the -# next two lines. (If you are using GCC, comment out the alloca.o part) -# (Get alloca from the emacs distribution, or use GCC.) -# HPUX 7.0 may have a bug in setvbuf. gas gives an error message like -# 1:"Unknown operator" -- Statement 'NO_APP' ignored -# if setvbuf is broken. Re-compile input-file.c (and only input-file.c -# with -DVMS and the problem should go away. -# -# G0 = -g -I. -DUSG -# LOADLIBES = alloca.o -# -# To compile gas for a Sequent Symmetry, comment out all the above lines, -# and un-comment the next two lines. -# G0 = -g -I. -DUSE_SYSTEM_HDR -DEXEC_VERSION=1 -# LOADLIBES = -lc /usr/att/lib/libc.a - -# If you just want to compile the vax assembler, type 'make avax' - -# If you just want to compile the i386 assembler, type 'make a386' - -# If you just want to compile the ns32k assembler, type 'make a32k' - -# If you just want to compile the sparc assembler, type 'make asparc' - -# If you just want to compile the mc68020 assembler, make sure m68k.h -# is correctly set up, and type type 'make a68' (Except on HPUX machines, -# where you will have to make the changes marked below before typing -# 'make a68' -# m68k.h should be a symbolic or hard-link to one of -# m-sun3.h , m-hpux.h or m-generic.h -# depending on which machine you want to compile the 68020 assembler for. -# -# If you want the 68k assembler to be completely compatable with the the -# SUN one, un-comment the -DSUN_ASM_SYNTAX line below. -# -# If you machine does not have vfprintf, but does have _doprnt(), -# remove the # from the -DNO_VARARGS line below. -# -# If the return-type of a signal-hander is void (instead of int), -# remove the # from the -DSIGTY line below. -# -# To include the mc68851 mmu coprocessor instructions in the 68020 assembler, -# remove the # from the -Dm68851 line below. -# -# If you want the 68020 assembler use a register prefix character, un-comment -# the REGISTER_PREFIX line, and (maybe) change the '%' to the appropriate -# character. -# -# If you want the assembler to treat .L* or ..* symbols as local, instead of -# the usual L* symbols, un-comment the DOT_LABEL_PREFIX line. -# -# If you want the 80386 assembler to correctly handle fsub/fsubr and fdiv/fdivr -# opcodes (unlike most 80386 assemblers), remove the # from -# the -DNON_BROKEN_WORDS line below. -# -# To compile 80386 Gas for the Sequent Symmetry, un-comment the -DEXEC_VERSION -# and the -DUSE_SYSTEM_HDR lines below. -# -# To compile gas for the HP 9000/300 un-comment the -DUSE_HP_HDR line below. -# -# For the ns32k, the options are 32532 or 32032 CPU and 32381 or 32081 FPU. -# To select the NS32532, remove the # from the -DNS32532 line below. -# To compile in tne NS32381 opcodes in addition to the NS32081 opcodes -# (the 32381 is a superset of the 32081), remove the # from the -DNS32381 -# line below. -# -# For the ns32k on a Sequent, uncomment the SEQUENT_COMPATABILITY line below. -# -# If you want the .align N directive to align to the next N byte boundry, -# instead of the next 1<<N boundry, un-comment the OTHER_ALIGN line below. -# (This option is automatically enabled when building the sparc assembler. -# - -O1 = -DNO_VARARGS -O2 = # -DNON_BROKEN_WORDS -O3 = # -Dm68851 -O4 = # -DEXEC_VERSION=1 -O5 = # -DSIGTY=void -O6 = # -DNS32532 -O6 = # -DNS32381 -O7 = # -DDOT_LABEL_PREFIX -O8 = # -DSEQUENT_COMPATABILITY -O9 = # -DREGISTER_PREFIX=\'%\' -O10= # -DOTHER_ALIGN - -G1 = # -DUSE_SYSTEM_HDR -G2 = # -DUSE_HP_HDR -G3 = # -DSUN_ASM_SYNTAX - -OPTIONS = $(O1) $(O2) $(O3) $(O4) $(O5) $(O6) $(O7) $(O8) $(O9) $(O10) - -CFLAGS = $(G0) $(G1) $(G2) $(G3) $(G4) - -# -# To make the 68020 assembler compile as the default, un-comment the next -# line, and comment out all the other lines that start with DEFAULT_GAS -DEFAULT_GAS=a68 -# -# To make the VAX assembler compile as the default, un-comment the next -# line and commment out all the other lines that start with DEFAULT_GAS -#DEFAULT_GAS=avax -# -# To make the 80386 assembler compile as the default, un-comment the next -# line and commment out all the other lines that start with DEFAULT_GAS -#DEFAULT_GAS=a386 -# -# To make the ns32k assembler compile as the default, un-comment the next -# line and commment out all the other lines that start with DEFAULT_GAS -#DEFAULT_GAS=a32k -# -# To make the sparc assembler compile as the default, un-comment the next -# line and commment out all the other lines that start with DEFAULT_GAS -#DEFAULT_GAS=asparc -# -# To make the i860 assembler compile as the default, un-comment the next -# line and comment out all the other lines that start with DEFAULT_GAS -#DEFAULT_GAS=a860 - -# Global Sources ------------------------------------------------------------- - -a =\ -as.o xrealloc.o xmalloc.o hash.o hex-value.o \ -atof-generic.o append.o messages.o expr.o app.o \ -frags.o input-file.o input-scrub.o output-file.o \ -subsegs.o symbols.o version.o \ -flonum-const.o flonum-copy.o flonum-mult.o strstr.o bignum-copy.o \ -obstack.o -#gdb.o gdb-file.o gdb-symbols.o gdb-blocks.o gdb-lines.o - -a: $(DEFAULT_GAS) - @rm -f a - @ln $(DEFAULT_GAS) a - -# I860 GAS ------------------------------------------------------------------ -u = i860.o atof-ieee.o write-i860.o read-i860.o - -U = i860.c i860.h i860-opcode.h - -i860.o: i860.c i860.h i860-opcode.h as.h frags.h struc-symbol.h -i860.o: flonum.h expr.h hash.h md.h write.h read.h symbols.h - $(CC) -c $(CFLAGS) -DI860 i860.c - -atof-ieee.o: flonum.h - -write-i860.o: write.c i860.h - $(CC) -c -DI860 $(CFLAGS) write.c - mv write.o write-i860.o - -read-i860.o: read.c i860.h - $(CC) -c -DI860 $(CFLAGS) read.c - mv read.o read-i860.o - -a860: $a $u - $(CC) -o a860 $(LDFLAGS) $a $u $(LOADLIBES) - -# SPARC GAS ------------------------------------------------------------------ -v = sparc.o atof-ieee.o write-sparc.o read-sparc.o - -V = sparc.c sparc.h sparc-opcode.h - -atof-ieee.o: flonum.h -sparc.o: sparc.c sparc.h sparc-opcode.h as.h frags.h struc-symbol.h -sparc.o: flonum.h expr.h hash.h md.h write.h read.h symbols.h - $(CC) -c $(CFLAGS) -DSPARC sparc.c - -write-sparc.o: write.c - $(CC) -c -DSPARC $(CFLAGS) write.c - mv write.o write-sparc.o - -read-sparc.o: read.c - $(CC) -c -DSPARC $(CFLAGS) read.c - mv read.o read-sparc.o - -asparc: $a $v - $(CC) -o asparc $(LDFLAGS) $a $v $(LOADLIBES) - -# NS32K GAS ------------------------------------------------------------------ -w = ns32k.o atof-ieee.o write-ns32k.o read-ns32k.o - -W = ns32k.c ns32k-opcode.h - -atof-ieee.o: flonum.h -ns32k.o: as.h frags.h struc-symbol.h flonum.h expr.h md.h hash.h -ns32k.o: write.h symbols.h ns32k-opcode.h ns32k.c - $(CC) $(CFLAGS) $(OPTIONS) -c ns32k.c - -write-ns32k.o: write.c - $(CC) -c -DNS32K $(CFLAGS) write.c - mv write.o write-ns32k.o - -read-ns32k.o: - $(CC) -c -DNS32K $(CFLAGS) read.c - mv read.o read-ns32k.o - -a32k: $a $w - $(CC) -o a32k $(LDFLAGS) $a $w $(LOADLIBES) - -# 80386 GAS ------------------------------------------------------------------ -x = i386.o atof-ieee.o write.o read.o - -X = i386.c i386.h i386-opcode.h - -i386.o: i386.c as.h read.h flonum.h frags.h struc-symbol.h expr.h -i386.o: symbols.h hash.h md.h i386.h i386-opcode.h - $(CC) $(CFLAGS) $(OPTIONS) -c i386.c - -atof-ieee.o: flonum.h - -a386: $a $x - $(CC) -o a386 $(LDFLAGS) $a $x $(LOADLIBES) - -# 68020 GAS ------------------------------------------------------------------ -y = m68k.o atof-ieee.o write.o read.o - -Y = m68k.c atof-ieee.c m68k-opcode.h m-hpux.h m-sun3.h m-generic.h - -atof-ieee.o: flonum.h - -m68k.o: m68k.c a.out.gnu.h as.h expr.h flonum.h frags.h hash.h -m68k.o: m68k-opcode.h m68k.h md.h obstack.h struc-symbol.h - $(CC) $(CFLAGS) $(OPTIONS) -c m68k.c - -a68: $a $y - $(CC) -o a68 $(LDFLAGS) $a $y $(LOADLIBES) - -# VAX GAS -------------------------------------------------------------------- -z = vax.o atof-vax.o write.o read.o - -Z = vax.c atof-vax.c vax-opcode.h vax-inst.h \ - make-gas.com objrecdef.h vms.c vms-dbg.c README-vms-dbg - -vax.o: vax.c a.out.gnu.h as.h expr.h flonum.h frags.h md.h obstack.h -vax.o: read.h struc-symbol.h symbols.h vax-inst.h vax-opcode.h -atof-vax.o: as.h flonum.h read.h - -avax: $a $z - $(CC) -o avax $(LDFLAGS) $a $z $(LOADLIBES) - -# global files --------------------------------------------------------------- - -as.o: as.c - $(CC) $(CFLAGS) $(OPTIONS) -c as.c - -messages.o: messages.c - $(CC) $(CFLAGS) $(OPTIONS) -c messages.c - -hash.o: hash.c - $(CC) $(CFLAGS) -Derror=as_fatal -c hash.c - -xmalloc.o: xmalloc.c - $(CC) $(CFLAGS) -Derror=as_fatal -c xmalloc.c - -xrealloc.o: xrealloc.c - $(CC) $(CFLAGS) -Derror=as_fatal -c xrealloc.c - -A =\ -as.c xrealloc.c xmalloc.c hash.c hex-value.c \ -atof-generic.c append.c messages.c expr.c bignum-copy.c \ -frags.c input-file.c input-scrub.c output-file.c read.c \ -subsegs.c symbols.c write.c strstr.c \ -flonum-const.c flonum-copy.c flonum-mult.c app.c version.c \ -obstack.c \ -#gdb.c gdb-file.c gdb-symbols.c gdb-blocks.c \ -#gdb-lines.c - -H = \ -a.out.gnu.h as.h bignum.h expr.h flonum.h \ -frags.h hash.h input-file.h md.h \ -obstack.h read.h struc-symbol.h subsegs.h \ -symbols.h write.h - -dist: COPYING README ChangeLog $A $H $Z $Y $X $W $V $U Makefile - echo gas-`sed -n -e '/ version /s/[^0-9.]*\([0-9.]*\).*/\1/p' < version.c` > .fname - mkdir `cat .fname` - - ln COPYING README ChangeLog $A $H $Z $Y $X $W $V $U Makefile `cat .fname` - tar cvhZf `cat .fname`.tar.Z `cat .fname` - -rm -r `cat .fname` - -rm .fname - -clean: - rm -f a avax a68 a386 a32k asparc $a $v $w $x $y $z a core gmon.out bugs a.out - -install: a - cp a $(BINDIR)/gas - - -# General .o-->.h dependencies - -app.o: as.h -as.o: a.out.gnu.h as.h read.h struc-symbol.h write.h -atof-generic.o: flonum.h -bignum-copy.o: bignum.h -expr.o: a.out.gnu.h as.h expr.h flonum.h obstack.h read.h struc-symbol.h -expr.o: symbols.h -flonum-const.o: flonum.h -flonum-copy.o: flonum.h -flonum-mult.o: flonum.h -flonum-normal.o:flonum.h -flonum-print.o: flonum.h -frags.o: a.out.gnu.h as.h frags.h obstack.h struc-symbol.h subsegs.h -#gdb.o: as.h -#gdb-blocks.o: as.h -#gdb-lines.o: as.h frags.h obstack.h -#gdb-symbols.o: a.out.gnu.h as.h struc-symbol.h -hash.o: hash.h -input-file.o: input-file.h -input-scrub.o: as.h input-file.h read.h -messages.o: as.h -obstack.o: obstack.h -read.o: a.out.gnu.h as.h expr.h flonum.h frags.h hash.h md.h obstack.h -read.o: read.h struc-symbol.h symbols.h -subsegs.o: a.out.gnu.h as.h frags.h obstack.h struc-symbol.h subsegs.h write.h -symbols.o: a.out.gnu.h as.h frags.h hash.h obstack.h struc-symbol.h symbols.h -write.o: a.out.gnu.h as.h md.h obstack.h struc-symbol.h subsegs.h -write.o: symbols.h write.h - -flonum.h: bignum.h - |