diff options
Diffstat (limited to 'gnu/lib/libreadline/doc/rluser.texinfo')
| -rw-r--r-- | gnu/lib/libreadline/doc/rluser.texinfo | 875 |
1 files changed, 0 insertions, 875 deletions
diff --git a/gnu/lib/libreadline/doc/rluser.texinfo b/gnu/lib/libreadline/doc/rluser.texinfo deleted file mode 100644 index 35675492695d..000000000000 --- a/gnu/lib/libreadline/doc/rluser.texinfo +++ /dev/null @@ -1,875 +0,0 @@ -@comment %**start of header (This is for running Texinfo on a region.) -@setfilename rluser.info -@comment %**end of header (This is for running Texinfo on a region.) -@setchapternewpage odd - -@ignore -This file documents the end user interface to the GNU command line -editing features. It is to be an appendix to manuals for programs which -use these features. There is a document entitled "readline.texinfo" -which contains both end-user and programmer documentation for the GNU -Readline Library. - -Copyright (C) 1988 Free Software Foundation, Inc. - -Authored by Brian Fox and Chet Ramey. - -Permission is granted to process this file through Tex and print the -results, provided the printed document carries copying permission notice -identical to this one except for the removal of this paragraph (this -paragraph not being relevant to the printed manual). - -Permission is granted to make and distribute verbatim copies of this manual -provided the copyright notice and this permission notice are preserved on -all copies. - -Permission is granted to copy and distribute modified versions of this -manual under the conditions for verbatim copying, provided also that the -GNU Copyright statement is available to the distributee, and provided that -the entire resulting derived work is distributed under the terms of a -permission notice identical to this one. - -Permission is granted to copy and distribute translations of this manual -into another language, under the above conditions for modified versions. -@end ignore - -@comment If you are including this manual as an appendix, then set the -@comment variable readline-appendix. - -@node Command Line Editing -@chapter Command Line Editing - -This chapter describes the basic features of the GNU -command line editing interface. - -@menu -* Introduction and Notation:: Notation used in this text. -* Readline Interaction:: The minimum set of commands for editing a line. -* Readline Init File:: Customizing Readline from a user's view. -* Bindable Readline Commands:: A description of most of the Readline commands - available for binding -* Readline vi Mode:: A short description of how to make Readline - behave like the vi editor. -@end menu - -@node Introduction and Notation -@section Introduction to Line Editing - -The following paragraphs describe the notation used to represent -keystrokes. - -The text @key{C-k} is read as `Control-K' and describes the character -produced when the Control key is depressed and the @key{k} key is struck. - -The text @key{M-k} is read as `Meta-K' and describes the character -produced when the meta key (if you have one) is depressed, and the @key{k} -key is struck. If you do not have a meta key, the identical keystroke -can be generated by typing @key{ESC} @i{first}, and then typing @key{k}. -Either process is known as @dfn{metafying} the @key{k} key. - -The text @key{M-C-k} is read as `Meta-Control-k' and describes the -character produced by @dfn{metafying} @key{C-k}. - -In addition, several keys have their own names. Specifically, -@key{DEL}, @key{ESC}, @key{LFD}, @key{SPC}, @key{RET}, and @key{TAB} all -stand for themselves when seen in this text, or in an init file -(@pxref{Readline Init File}, for more info). - -@node Readline Interaction -@section Readline Interaction -@cindex interaction, readline - -Often during an interactive session you type in a long line of text, -only to notice that the first word on the line is misspelled. The -Readline library gives you a set of commands for manipulating the text -as you type it in, allowing you to just fix your typo, and not forcing -you to retype the majority of the line. Using these editing commands, -you move the cursor to the place that needs correction, and delete or -insert the text of the corrections. Then, when you are satisfied with -the line, you simply press @key{RETURN}. You do not have to be at the -end of the line to press @key{RETURN}; the entire line is accepted -regardless of the location of the cursor within the line. - -@menu -* Readline Bare Essentials:: The least you need to know about Readline. -* Readline Movement Commands:: Moving about the input line. -* Readline Killing Commands:: How to delete text, and how to get it back! -* Readline Arguments:: Giving numeric arguments to commands. -@end menu - -@node Readline Bare Essentials -@subsection Readline Bare Essentials - -In order to enter characters into the line, simply type them. The typed -character appears where the cursor was, and then the cursor moves one -space to the right. If you mistype a character, you can use your -erase character to back up and delete the mistyped character. - -Sometimes you may miss typing a character that you wanted to type, and -not notice your error until you have typed several other characters. In -that case, you can type @key{C-b} to move the cursor to the left, and then -correct your mistake. Afterwards, you can move the cursor to the right -with @key{C-f}. - -When you add text in the middle of a line, you will notice that characters -to the right of the cursor are `pushed over' to make room for the text -that you have inserted. Likewise, when you delete text behind the cursor, -characters to the right of the cursor are `pulled back' to fill in the -blank space created by the removal of the text. A list of the basic bare -essentials for editing the text of an input line follows. - -@table @asis -@item @key{C-b} -Move back one character. -@item @key{C-f} -Move forward one character. -@item @key{DEL} -Delete the character to the left of the cursor. -@item @key{C-d} -Delete the character underneath the cursor. -@item @w{Printing characters} -Insert the character into the line at the cursor. -@item @key{C-_} -Undo the last thing that you did. You can undo all the way back to an -empty line. -@end table - -@node Readline Movement Commands -@subsection Readline Movement Commands - - -The above table describes the most basic possible keystrokes that you need -in order to do editing of the input line. For your convenience, many -other commands have been added in addition to @key{C-b}, @key{C-f}, -@key{C-d}, and @key{DEL}. Here are some commands for moving more rapidly -about the line. - -@table @key -@item C-a -Move to the start of the line. -@item C-e -Move to the end of the line. -@item M-f -Move forward a word. -@item M-b -Move backward a word. -@item C-l -Clear the screen, reprinting the current line at the top. -@end table - -Notice how @key{C-f} moves forward a character, while @key{M-f} moves -forward a word. It is a loose convention that control keystrokes -operate on characters while meta keystrokes operate on words. - -@node Readline Killing Commands -@subsection Readline Killing Commands - -@cindex Killing text -@cindex Yanking text - -@dfn{Killing} text means to delete the text from the line, but to save -it away for later use, usually by @dfn{yanking} (re-inserting) -it back into the line. -If the description for a command says that it `kills' text, then you can -be sure that you can get the text back in a different (or the same) -place later. - -When you use a kill command, the text is saved in a @dfn{kill-ring}. -Any number of consecutive kills save all of the killed text together, so -that when you yank it back, you get it all. The kill -ring is not line specific; the text that you killed on a previously -typed line is available to be yanked back later, when you are typing -another line. -@cindex Kill ring - -Here is the list of commands for killing text. - -@table @key -@item C-k -Kill the text from the current cursor position to the end of the line. - -@item M-d -Kill from the cursor to the end of the current word, or if between -words, to the end of the next word. - -@item M-DEL -Kill from the cursor the start of the previous word, or if between -words, to the start of the previous word. - -@item C-w -Kill from the cursor to the previous whitespace. This is different than -@key{M-DEL} because the word boundaries differ. - -@end table - -And, here is how to @dfn{yank} the text back into the line. Yanking -means to copy the most-recently-killed text from the kill buffer. - -@table @key -@item C-y -Yank the most recently killed text back into the buffer at the cursor. - -@item M-y -Rotate the kill-ring, and yank the new top. You can only do this if -the prior command is @key{C-y} or @key{M-y}. -@end table - -@node Readline Arguments -@subsection Readline Arguments - -You can pass numeric arguments to Readline commands. Sometimes the -argument acts as a repeat count, other times it is the @i{sign} of the -argument that is significant. If you pass a negative argument to a -command which normally acts in a forward direction, that command will -act in a backward direction. For example, to kill text back to the -start of the line, you might type @key{M--} @key{C-k}. - -The general way to pass numeric arguments to a command is to type meta -digits before the command. If the first `digit' you type is a minus -sign (@key{-}), then the sign of the argument will be negative. Once -you have typed one meta digit to get the argument started, you can type -the remainder of the digits, and then the command. For example, to give -the @key{C-d} command an argument of 10, you could type @key{M-1 0 C-d}. - - -@node Readline Init File -@section Readline Init File - -Although the Readline library comes with a set of Emacs-like -keybindings installed by default, -it is possible that you would like to use a different set -of keybindings. You can customize programs that use Readline by putting -commands in an @dfn{init} file in your home directory. The name of this -@ifset BashFeatures -file is taken from the value of the shell variable @code{INPUTRC}. If -@end ifset -@ifclear BashFeatures -file is taken from the value of the environment variable @code{INPUTRC}. If -@end ifclear -that variable is unset, the default is @file{~/.inputrc}. - -When a program which uses the Readline library starts up, the -init file is read, and the key bindings are set. - -In addition, the @code{C-x C-r} command re-reads this init file, thus -incorporating any changes that you might have made to it. - -@menu -* Readline Init Syntax:: Syntax for the commands in the inputrc file. -* Conditional Init Constructs:: Conditional key bindings in the inputrc file. -@end menu - -@node Readline Init Syntax -@subsection Readline Init Syntax - -There are only a few basic constructs allowed in the -Readline init file. Blank lines are ignored. -Lines beginning with a @key{#} are comments. -Lines beginning with a @key{$} indicate conditional -constructs (@pxref{Conditional Init Constructs}). Other lines -denote variable settings and key bindings. - -@table @asis -@item Variable Settings -You can change the state of a few variables in Readline by -using the @code{set} command within the init file. Here is how you -would specify that you wish to use @code{vi} line editing commands: - -@example -set editing-mode vi -@end example - -Right now, there are only a few variables which can be set; -so few, in fact, that we just list them here: - -@table @code - -@item editing-mode -@vindex editing-mode -The @code{editing-mode} variable controls which editing mode you are -using. By default, Readline starts up in Emacs editing mode, where -the keystrokes are most similar to Emacs. This variable can be -set to either @code{emacs} or @code{vi}. - -@item horizontal-scroll-mode -@vindex horizontal-scroll-mode -This variable can be set to either @code{On} or @code{Off}. Setting it -to @code{On} means that the text of the lines that you edit will scroll -horizontally on a single screen line when they are longer than the width -of the screen, instead of wrapping onto a new screen line. By default, -this variable is set to @code{Off}. - -@item mark-modified-lines -@vindex mark-modified-lines -This variable, when set to @code{On}, says to display an asterisk -(@samp{*}) at the start of history lines which have been modified. -This variable is @code{off} by default. - -@item bell-style -@vindex bell-style -Controls what happens when Readline wants to ring the terminal bell. -If set to @code{none}, Readline never rings the bell. If set to -@code{visible}, Readline uses a visible bell if one is available. -If set to @code{audible} (the default), Readline attempts to ring -the terminal's bell. - -@item comment-begin -@vindex comment-begin -The string to insert at the beginning of the line when the -@code{vi-comment} command is executed. The default value -is @code{"#"}. - -@item meta-flag -@vindex meta-flag -If set to @code{on}, Readline will enable eight-bit input (it -will not strip the eighth bit from the characters it reads), -regardless of what the terminal claims it can support. The -default value is @code{off}. - -@item convert-meta -@vindex convert-meta -If set to @code{on}, Readline will convert characters with the -eigth bit set to an ASCII key sequence by stripping the eigth -bit and prepending an @key{ESC} character, converting them to a -meta-prefixed key sequence. The default value is @code{on}. - -@item output-meta -@vindex output-meta -If set to @code{on}, Readline will display characters with the -eighth bit set directly rather than as a meta-prefixed escape -sequence. The default is @code{off}. - -@item completion-query-items -@vindex completion-query-items -The number of possible completions that determines when the user is -asked whether he wants to see the list of possibilities. If the -number of possible completions is greater than this value, -Readline will ask the user whether or not he wishes to view -them; otherwise, they are simply listed. The default limit is -@code{100}. - -@item keymap -@vindex keymap -Sets Readline's idea of the current keymap for key binding commands. -Acceptable @code{keymap} names are -@code{emacs}, -@code{emacs-standard}, -@code{emacs-meta}, -@code{emacs-ctlx}, -@code{vi}, -@code{vi-move}, -@code{vi-command}, and -@code{vi-insert}. -@code{vi} is equivalent to @code{vi-command}; @code{emacs} is -equivalent to @code{emacs-standard}. The default value is @code{emacs}. -The value of the @code{editing-mode} variable also affects the -default keymap. - -@item show-all-if-ambiguous -@vindex show-all-if-ambiguous -This alters the default behavior of the completion functions. If -set to @code{on}, -words which have more than one possible completion cause the -matches to be listed immediately instead of ringing the bell. -The default value is @code{off}. - -@item expand-tilde -@vindex expand-tilde -If set to @code{on}, tilde expansion is performed when Readline -attempts word completion. The default is @code{off}. - -@end table - -@item Key Bindings -The syntax for controlling key bindings in the init file is -simple. First you have to know the name of the command that you -want to change. The following pages contain tables of the command name, -the default keybinding, and a short description of what the command -does. - -Once you know the name of the command, simply place the name of the key -you wish to bind the command to, a colon, and then the name of the -command on a line in the init file. The name of the key -can be expressed in different ways, depending on which is most -comfortable for you. - -@table @asis -@item @w{@var{keyname}: @var{function-name} or @var{macro}} -@var{keyname} is the name of a key spelled out in English. For example: -@example -Control-u: universal-argument -Meta-Rubout: backward-kill-word -Control-o: ">&output" -@end example - -In the above example, @samp{C-u} is bound to the function -@code{universal-argument}, and @samp{C-o} is bound to run the macro -expressed on the right hand side (that is, to insert the text -@samp{>&output} into the line). - -@item @w{"@var{keyseq}": @var{function-name} or @var{macro}} -@var{keyseq} differs from @var{keyname} above in that strings -denoting an entire key sequence can be specified, by placing -the key sequence in double quotes. Some GNU Emacs style key -escapes can be used, as in the following example, but the -special character names are not recognized. - -@example -"\C-u": universal-argument -"\C-x\C-r": re-read-init-file -"\e[11~": "Function Key 1" -@end example - -In the above example, @samp{C-u} is bound to the function -@code{universal-argument} (just as it was in the first example), -@samp{C-x C-r} is bound to the function @code{re-read-init-file}, and -@samp{ESC [ 1 1 ~} is bound to insert the text @samp{Function Key 1}. -The following escape sequences are available when specifying key -sequences: - -@table @code -@item @kbd{\C-} -control prefix -@item @kbd{\M-} -meta prefix -@item @kbd{\e} -an escape character -@item @kbd{\\} -backslash -@item @kbd{\"} -@key{"} -@item @kbd{\'} -@key{'} -@end table - -When entering the text of a macro, single or double quotes should -be used to indicate a macro definition. Unquoted text -is assumed to be a function name. Backslash -will quote any character in the macro text, including @key{"} -and @key{'}. -For example, the following binding will make @kbd{C-x \} -insert a single @key{\} into the line: -@example -"\C-x\\": "\\" -@end example - -@end table -@end table - -@node Conditional Init Constructs -@subsection Conditional Init Constructs - -Readline implements a facility similar in spirit to the conditional -compilation features of the C preprocessor which allows key -bindings and variable settings to be performed as the result -of tests. There are three parser directives used. - -@ftable @code -@item $if -The @code{$if} construct allows bindings to be made based on the -editing mode, the terminal being used, or the application using -Readline. The text of the test extends to the end of the line; -no characters are required to isolate it. - -@table @code -@item mode -The @code{mode=} form of the @code{$if} directive is used to test -whether Readline is in @code{emacs} or @code{vi} mode. -This may be used in conjunction -with the @samp{set keymap} command, for instance, to set bindings in -the @code{emacs-standard} and @code{emacs-ctlx} keymaps only if -Readline is starting out in @code{emacs} mode. - -@item term -The @code{term=} form may be used to include terminal-specific -key bindings, perhaps to bind the key sequences output by the -terminal's function keys. The word on the right side of the -@samp{=} is tested against the full name of the terminal and the -portion of the terminal name before the first @samp{-}. This -allows @var{sun} to match both @var{sun} and @var{sun-cmd}, -for instance. - -@item application -The @var{application} construct is used to include -application-specific settings. Each program using the Readline -library sets the @var{application name}, and you can test for it. -This could be used to bind key sequences to functions useful for -a specific program. For instance, the following command adds a -key sequence that quotes the current or previous word in Bash: -@example -$if bash -# Quote the current or previous word -"\C-xq": "\eb\"\ef\"" -$endif -@end example -@end table - -@item $endif -This command, as you saw in the previous example, terminates an -@code{$if} command. - -@item $else -Commands in this branch of the @code{$if} directive are executed if -the test fails. -@end ftable - -@node Bindable Readline Commands -@section Bindable Readline Commands - -@menu -* Commands For Moving:: Moving about the line. -* Commands For History:: Getting at previous lines. -* Commands For Text:: Commands for changing text. -* Commands For Killing:: Commands for killing and yanking. -* Numeric Arguments:: Specifying numeric arguments, repeat counts. -* Commands For Completion:: Getting Readline to do the typing for you. -* Keyboard Macros:: Saving and re-executing typed characters -* Miscellaneous Commands:: Other miscellaneous commands. -@end menu - -@node Commands For Moving -@subsection Commands For Moving -@ftable @code -@item beginning-of-line (C-a) -Move to the start of the current line. - -@item end-of-line (C-e) -Move to the end of the line. - -@item forward-char (C-f) -Move forward a character. - -@item backward-char (C-b) -Move back a character. - -@item forward-word (M-f) -Move forward to the end of the next word. Words are composed of -letters and digits. - -@item backward-word (M-b) -Move back to the start of this, or the previous, word. Words are -composed of letters and digits. - -@item clear-screen (C-l) -Clear the screen and redraw the current line, -leaving the current line at the top of the screen. - -@item redraw-current-line () -Refresh the current line. By default, this is unbound. - -@end ftable - -@node Commands For History -@subsection Commands For Manipulating The History - -@ftable @code -@item accept-line (Newline, Return) -@ifset BashFeatures -Accept the line regardless of where the cursor is. If this line is -non-empty, add it to the history list according to the setting of -the @code{HISTCONTROL} variable. If this line was a history -line, then restore the history line to its original state. -@end ifset -@ifclear BashFeatures -Accept the line regardless of where the cursor is. If this line is -non-empty, add it to the history list. If this line was a history -line, then restore the history line to its original state. -@end ifclear - -@item previous-history (C-p) -Move `up' through the history list. - -@item next-history (C-n) -Move `down' through the history list. - -@item beginning-of-history (M-<) -Move to the first line in the history. - -@item end-of-history (M->) -Move to the end of the input history, i.e., the line you are entering. - -@item reverse-search-history (C-r) -Search backward starting at the current line and moving `up' through -the history as necessary. This is an incremental search. - -@item forward-search-history (C-s) -Search forward starting at the current line and moving `down' through -the the history as necessary. This is an incremental search. - -@item non-incremental-reverse-search-history (M-p) -Search backward starting at the current line and moving `up' -through the history as necessary using a non-incremental search -for a string supplied by the user. - -@item non-incremental-forward-search-history (M-n) -Search forward starting at the current line and moving `down' -through the the history as necessary using a non-incremental search -for a string supplied by the user. - -@item history-search-forward () -Search forward through the history for the string of characters -between the start of the current line and the current point. This -is a non-incremental search. By default, this command is unbound. - -@item history-search-backward () -Search backward through the history for the string of characters -between the start of the current line and the current point. This -is a non-incremental search. By default, this command is unbound. - -@item yank-nth-arg (M-C-y) -Insert the first argument to the previous command (usually -the second word on the previous line). With an argument @var{n}, -insert the @var{n}th word from the previous command (the words -in the previous command begin with word 0). A negative argument -inserts the @var{n}th word from the end of the previous command. - -@item yank-last-arg (M-., M-_) -Insert last argument to the previous command (the last word on the -previous line). With an -argument, behave exactly like @code{yank-nth-arg}. - -@end ftable - -@node Commands For Text -@subsection Commands For Changing Text - -@ftable @code -@item delete-char (C-d) -Delete the character under the cursor. If the cursor is at the -beginning of the line, there are no characters in the line, and -the last character typed was not C-d, then return EOF. - -@item backward-delete-char (Rubout) -Delete the character behind the cursor. A numeric arg says to kill -the characters instead of deleting them. - -@item quoted-insert (C-q, C-v) -Add the next character that you type to the line verbatim. This is -how to insert key sequences like @key{C-q}, for example. - -@item tab-insert (M-TAB) -Insert a tab character. - -@item self-insert (a, b, A, 1, !, ...) -Insert yourself. - -@item transpose-chars (C-t) -Drag the character before the cursor forward over -the character at the cursor, moving the -cursor forward as well. If the insertion point -is at the end of the line, then this -transposes the last two characters of the line. -Negative argumentss don't work. - -@item transpose-words (M-t) -Drag the word behind the cursor past the word in front of the cursor -moving the cursor over that word as well. - -@item upcase-word (M-u) -Uppercase the current (or following) word. With a negative argument, -do the previous word, but do not move the cursor. - -@item downcase-word (M-l) -Lowercase the current (or following) word. With a negative argument, -do the previous word, but do not move the cursor. - -@item capitalize-word (M-c) -Capitalize the current (or following) word. With a negative argument, -do the previous word, but do not move the cursor. - -@end ftable - -@node Commands For Killing -@subsection Killing And Yanking - -@ftable @code - -@item kill-line (C-k) -Kill the text from the current cursor position to the end of the line. - -@item backward-kill-line (C-x Rubout) -Kill backward to the beginning of the line. - -@item unix-line-discard (C-u) -Kill backward from the cursor to the beginning of the current line. -Save the killed text on the kill-ring. - -@item kill-whole-line () -Kill all characters on the current line, no matter where the -cursor is. By default, this is unbound. - -@item kill-word (M-d) -Kill from the cursor to the end of the current word, or if between -words, to the end of the next word. Word boundaries are the same -as @code{forward-word}. - -@item backward-kill-word (M-DEL) -Kill the word behind the cursor. Word boundaries are the same -as @code{backward-word}. - -@item unix-word-rubout (C-w) -Kill the word behind the cursor, using white space as a word -boundary. The killed text is saved on the kill-ring. - -@item delete-horizontal-space () -Delete all spaces and tabs around point. By default, this is unbound. - -@item yank (C-y) -Yank the top of the kill ring into the buffer at the current -cursor position. - -@item yank-pop (M-y) -Rotate the kill-ring, and yank the new top. You can only do this if -the prior command is yank or yank-pop. -@end ftable - -@node Numeric Arguments -@subsection Specifying Numeric Arguments -@ftable @code - -@item digit-argument (M-0, M-1, ... M--) -Add this digit to the argument already accumulating, or start a new -argument. M-- starts a negative argument. - -@item universal-argument () -Each time this is executed, the argument count is multiplied by four. -The argument count is initially one, so executing this function the -first time makes the argument count four. By default, this is not -bound to a key. -@end ftable - -@node Commands For Completion -@subsection Letting Readline Type For You - -@ftable @code -@item complete (TAB) -Attempt to do completion on the text before the cursor. This is -application-specific. Generally, if you are typing a filename -argument, you can do filename completion; if you are typing a command, -you can do command completion, if you are typing in a symbol to GDB, you -can do symbol name completion, if you are typing in a variable to Bash, -you can do variable name completion, and so on. -@ifset BashFeatures -See the Bash manual page for a complete list of available completion -functions. -@end ifset - -@item possible-completions (M-?) -List the possible completions of the text before the cursor. - -@item insert-completions () -Insert all completions of the text before point that would have -been generated by @code{possible-completions}. By default, this -is not bound to a key. - -@end ftable - -@node Keyboard Macros -@subsection Keyboard Macros -@ftable @code - -@item start-kbd-macro (C-x () -Begin saving the characters typed into the current keyboard macro. - -@item end-kbd-macro (C-x )) -Stop saving the characters typed into the current keyboard macro -and save the definition. - -@item call-last-kbd-macro (C-x e) -Re-execute the last keyboard macro defined, by making the characters -in the macro appear as if typed at the keyboard. - -@end ftable - -@node Miscellaneous Commands -@subsection Some Miscellaneous Commands -@ftable @code - -@item re-read-init-file (C-x C-r) -Read in the contents of your init file, and incorporate -any bindings or variable assignments found there. - -@item abort (C-g) -Abort the current editing command and -ring the terminal's bell (subject to the setting of -@code{bell-style}). - -@item do-uppercase-version (M-a, M-b, ...) -Run the command that is bound to the corresoponding uppercase -character. - -@item prefix-meta (ESC) -Make the next character that you type be metafied. This is for people -without a meta key. Typing @samp{ESC f} is equivalent to typing -@samp{M-f}. - -@item undo (C-_, C-x C-u) -Incremental undo, separately remembered for each line. - -@item revert-line (M-r) -Undo all changes made to this line. This is like typing the @code{undo} -command enough times to get back to the beginning. - -@item tilde-expand (M-~) -Perform tilde expansion on the current word. - -@item dump-functions () -Print all of the functions and their key bindings to the -readline output stream. If a numeric argument is supplied, -the output is formatted in such a way that it can be made part -of an @var{inputrc} file. - -@ifset BashFeatures -@item display-shell-version (C-x C-v) -Display version information about the current instance of Bash. - -@item shell-expand-line (M-C-e) -Expand the line the way the shell does when it reads it. This -performs alias and history expansion as well as all of the shell -word expansions. - -@item history-expand-line (M-^) -Perform history expansion on the current line. - -@item insert-last-argument (M-., M-_) -A synonym for @code{yank-last-arg}. - -@item operate-and-get-next (C-o) -Accept the current line for execution and fetch the next line -relative to the current line from the history for editing. Any -argument is ignored. - -@item emacs-editing-mode (C-e) -When in @code{vi} editing mode, this causes a switch back to -emacs editing mode, as if the command @code{set -o emacs} had -been executed. - -@end ifset - -@end ftable - -@node Readline vi Mode -@section Readline vi Mode - -While the Readline library does not have a full set of @code{vi} -editing functions, it does contain enough to allow simple editing -of the line. The Readline @code{vi} mode behaves as specified in -the Posix 1003.2 standard. - -@ifset BashFeatures -In order to switch interactively between @code{Emacs} and @code{Vi} -editing modes, use the @code{set -o emacs} and @code{set -o vi} -commands (@pxref{The Set Builtin}). -@end ifset -@ifclear BashFeatures -In order to switch interactively between @code{Emacs} and @code{Vi} -editing modes, use the command M-C-j (toggle-editing-mode). -@end ifclear -The Readline default is @code{emacs} mode. - -When you enter a line in @code{vi} mode, you are already placed in -`insertion' mode, as if you had typed an @samp{i}. Pressing @key{ESC} -switches you into `command' mode, where you can edit the text of the -line with the standard @code{vi} movement keys, move to previous -history lines with @samp{k}, and following lines with @samp{j}, and -so forth. |