diff options
Diffstat (limited to 'share')
| -rw-r--r-- | share/man/man4/intpm.4 | 64 | ||||
| -rw-r--r-- | share/man/man4/man4.i386/ste.4 | 149 |
2 files changed, 213 insertions, 0 deletions
diff --git a/share/man/man4/intpm.4 b/share/man/man4/intpm.4 new file mode 100644 index 000000000000..0b973b7b34b9 --- /dev/null +++ b/share/man/man4/intpm.4 @@ -0,0 +1,64 @@ +.\" Copyright (c) 1999 Takanori Watanabe +.\" All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.\" Note: The date here should be updated whenever a non-trivial +.\" change is made to the manual page. +.Dd January 8, 1999 +.Dt INTPM 4 i386 +.\" Note: Only specify the operating system when the command +.\" is FreeBSD specific, otherwise use the .Os macro with no +.\" arguments. +.Os FreeBSD 3.0 +.Sh NAME +.Nm intpm +.Nd Intel PIIX4 Power management controller driver. +.Sh SYNOPSIS +.Cd controller smbus0 +.Cd controller intpm0 + +.Sh DESCRIPTION +This driver provides access to +.Tn Intel PIIX4 PCI Controller function 3 , +Power management controller. Currently, only smbus controller +function is implemented. But it also have bus idle monitoring function. It +will display mapped I/O address for bus monitoring function when attaching. + +.Sh SEE ALSO +.Xr smb 4 , +.Xr smbus 4 +.Sh HISTORY +The +.Nm +manual page example first appeared in +.Fx 3.0 . +.Sh AUTHORS +This +manual page was written by +.An Takanori Watanabe Aq takawata@shidahara1.planet.sci.kobe-u.ac.jp . +.Sh BUGS +This device requires IRQ 9 exclusively. To use this, you should enable +ACPI function in BIOS configuration, or PnP mechanism assigns conflicted +IRQ for PnP ISA card. And don't use IRQ 9 for Non-PnP ISA cards. diff --git a/share/man/man4/man4.i386/ste.4 b/share/man/man4/man4.i386/ste.4 new file mode 100644 index 000000000000..3da3895c54a4 --- /dev/null +++ b/share/man/man4/man4.i386/ste.4 @@ -0,0 +1,149 @@ +.\" Copyright (c) 1997, 1998, 1999 +.\" Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 3. All advertising materials mentioning features or use of this software +.\" must display the following acknowledgement: +.\" This product includes software developed by Bill Paul. +.\" 4. Neither the name of the author nor the names of any co-contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD +.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF +.\" THE POSSIBILITY OF SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd August 21, 1999 +.Dt STE 4 i386 +.Os FreeBSD +.Sh NAME +.Nm ste +.Nd +Sundance Technologies ST201 fast ethernet device driver +.Sh SYNOPSIS +.Cd "controller miibus0" +.Cd "device ste0" +.Sh DESCRIPTION +The +.Nm +driver provides support for PCI ethernet adapters and embedded +controllers based on the Sundance Technologies ST201 PCI fast +ethernet controller chip. This includes the D-Link DFE-550TX. +.Pp +The Sundance ST201 uses bus master DMA and is designed to be a +3Com Etherlink XL workalike. It uses the same DMA descriptor +structure and is very similar in operation, however its register +layout is different. The ST201 has a 64-bit multicast hash filter +and a single perfect filter entry for the station address. IT +supports both 10 and 100Mbps speeds in either full or half duplex +using an MII transceiver. +.Pp +The +.Nm +driver supports the following media types: +.Pp +.Bl -tag -width xxxxxxxxxxxxxxxxxxxx +.It autoselect +Enable autoselection of the media type and options. +The user can manually override +the autoselected mode by adding media options to the +.Pa /etc/rc.conf +fine. +.It 10baseT/UTP +Set 10Mbps operation. The +.Ar mediaopt +option can also be used to select either +.Ar full-duplex +or +.Ar half-duplex modes. +.It 100baseTX +Set 100Mbps (fast ethernet) operation. The +.Ar mediaopt +option can also be used to select either +.Ar full-duplex +or +.Ar half-duplex +modes. +.El +.Pp +The +.Nm +driver supports the following media options: +.Pp +.Bl -tag -width xxxxxxxxxxxxxxxxxxxx +.It full-duplex +Force full duplex operation +.It half-duplex +Force half duplex operation. +.El +.Pp +For more information on configuring this device, see +.Xr ifconfig 8 . +.Sh DIAGNOSTICS +.Bl -diag +.It "ste%d: couldn't map ports/memory" +A fatal initialization error has occurred. +.It "ste%d: couldn't map interrupt" +A fatal initialization error has occurred. +.It "ste%d: watchdog timeout" +The device has stopped responding to the network, or there is a problem with +the network connection (cable). +.It "ste%d: no memory for rx list" +The driver failed to allocate an mbuf for the receiver ring. +.It "ste%d: no memory for tx list" +The driver failed to allocate an mbuf for the transmitter ring when +allocating a pad buffer or collapsing an mbuf chain into a cluster. +.It "ste%d: chip is in D3 power state -- setting to D0" +This message applies only to adapters which support power +management. Some operating systems place the controller in low power +mode when shutting down, and some PCI BIOSes fail to bring the chip +out of this state before configuring it. The controller loses all of +its PCI configuration in the D3 state, so if the BIOS does not set +it back to full power mode in time, it won't be able to configure it +correctly. The driver tries to detect this condition and bring +the adapter back to the D0 (full power) state, but this may not be +enough to return the driver to a fully operational condition. If +you see this message at boot time and the driver fails to attach +the device as a network interface, you will have to perform second +warm boot to have the device properly configured. +.Pp +Note that this condition only occurs when warm booting from another +operating system. If you power down your system prior to booting +.Fx , +the card should be configured correctly. +.El +.Sh SEE ALSO +.Xr arp 4 , +.Xr netintro 4 , +.Xr ifconfig 8 +.Rs +.%T Sundance ST201 data sheet +.%O http://www.sundanceti.com +.Re +.Sh HISTORY +The +.Nm +device driver first appeared in +.Fx 3.0 . +.Sh AUTHORS +The +.Nm +driver was written by +.An Bill Paul Aq wpaul@ee.columbia.edu . |