diff options
Diffstat (limited to 'source/components/resources/rsmisc.c')
| -rw-r--r-- | source/components/resources/rsmisc.c | 869 |
1 files changed, 869 insertions, 0 deletions
diff --git a/source/components/resources/rsmisc.c b/source/components/resources/rsmisc.c new file mode 100644 index 000000000000..dfad696ca1d1 --- /dev/null +++ b/source/components/resources/rsmisc.c @@ -0,0 +1,869 @@ +/******************************************************************************* + * + * Module Name: rsmisc - Miscellaneous resource descriptors + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#define __RSMISC_C__ + +#include "acpi.h" +#include "accommon.h" +#include "acresrc.h" + +#define _COMPONENT ACPI_RESOURCES + ACPI_MODULE_NAME ("rsmisc") + + +#define INIT_RESOURCE_TYPE(i) i->ResourceOffset +#define INIT_RESOURCE_LENGTH(i) i->AmlOffset +#define INIT_TABLE_LENGTH(i) i->Value + +#define COMPARE_OPCODE(i) i->ResourceOffset +#define COMPARE_TARGET(i) i->AmlOffset +#define COMPARE_VALUE(i) i->Value + + +/******************************************************************************* + * + * FUNCTION: AcpiRsConvertAmlToResource + * + * PARAMETERS: Resource - Pointer to the resource descriptor + * Aml - Where the AML descriptor is returned + * Info - Pointer to appropriate conversion table + * + * RETURN: Status + * + * DESCRIPTION: Convert an external AML resource descriptor to the corresponding + * internal resource descriptor + * + ******************************************************************************/ + +ACPI_STATUS +AcpiRsConvertAmlToResource ( + ACPI_RESOURCE *Resource, + AML_RESOURCE *Aml, + ACPI_RSCONVERT_INFO *Info) +{ + ACPI_RS_LENGTH AmlResourceLength; + void *Source; + void *Destination; + char *Target; + UINT8 Count; + UINT8 FlagsMode = FALSE; + UINT16 ItemCount = 0; + UINT16 Temp16 = 0; + + + ACPI_FUNCTION_TRACE (RsConvertAmlToResource); + + + if (!Info) + { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + if (((ACPI_SIZE) Resource) & 0x3) + { + /* Each internal resource struct is expected to be 32-bit aligned */ + + ACPI_WARNING ((AE_INFO, + "Misaligned resource pointer (get): %p Type 0x%2.2X Length %u", + Resource, Resource->Type, Resource->Length)); + } + + /* Extract the resource Length field (does not include header length) */ + + AmlResourceLength = AcpiUtGetResourceLength (Aml); + + /* + * First table entry must be ACPI_RSC_INITxxx and must contain the + * table length (# of table entries) + */ + Count = INIT_TABLE_LENGTH (Info); + while (Count) + { + /* + * Source is the external AML byte stream buffer, + * destination is the internal resource descriptor + */ + Source = ACPI_ADD_PTR (void, Aml, Info->AmlOffset); + Destination = ACPI_ADD_PTR (void, Resource, Info->ResourceOffset); + + switch (Info->Opcode) + { + case ACPI_RSC_INITGET: + /* + * Get the resource type and the initial (minimum) length + */ + ACPI_MEMSET (Resource, 0, INIT_RESOURCE_LENGTH (Info)); + Resource->Type = INIT_RESOURCE_TYPE (Info); + Resource->Length = INIT_RESOURCE_LENGTH (Info); + break; + + + case ACPI_RSC_INITSET: + break; + + + case ACPI_RSC_FLAGINIT: + + FlagsMode = TRUE; + break; + + + case ACPI_RSC_1BITFLAG: + /* + * Mask and shift the flag bit + */ + ACPI_SET8 (Destination) = (UINT8) + ((ACPI_GET8 (Source) >> Info->Value) & 0x01); + break; + + + case ACPI_RSC_2BITFLAG: + /* + * Mask and shift the flag bits + */ + ACPI_SET8 (Destination) = (UINT8) + ((ACPI_GET8 (Source) >> Info->Value) & 0x03); + break; + + + case ACPI_RSC_3BITFLAG: + /* + * Mask and shift the flag bits + */ + ACPI_SET8 (Destination) = (UINT8) + ((ACPI_GET8 (Source) >> Info->Value) & 0x07); + break; + + + case ACPI_RSC_COUNT: + + ItemCount = ACPI_GET8 (Source); + ACPI_SET8 (Destination) = (UINT8) ItemCount; + + Resource->Length = Resource->Length + + (Info->Value * (ItemCount - 1)); + break; + + + case ACPI_RSC_COUNT16: + + ItemCount = AmlResourceLength; + ACPI_SET16 (Destination) = ItemCount; + + Resource->Length = Resource->Length + + (Info->Value * (ItemCount - 1)); + break; + + + case ACPI_RSC_COUNT_GPIO_PIN: + + Target = ACPI_ADD_PTR (void, Aml, Info->Value); + ItemCount = ACPI_GET16 (Target) - ACPI_GET16 (Source); + + Resource->Length = Resource->Length + ItemCount; + ItemCount = ItemCount / 2; + ACPI_SET16 (Destination) = ItemCount; + break; + + + case ACPI_RSC_COUNT_GPIO_VEN: + + ItemCount = ACPI_GET8 (Source); + ACPI_SET8 (Destination) = (UINT8) ItemCount; + + Resource->Length = Resource->Length + + (Info->Value * ItemCount); + break; + + + case ACPI_RSC_COUNT_GPIO_RES: + + /* + * Vendor data is optional (length/offset may both be zero) + * Examine vendor data length field first + */ + Target = ACPI_ADD_PTR (void, Aml, (Info->Value + 2)); + if (ACPI_GET16 (Target)) + { + /* Use vendor offset to get resource source length */ + + Target = ACPI_ADD_PTR (void, Aml, Info->Value); + ItemCount = ACPI_GET16 (Target) - ACPI_GET16 (Source); + } + else + { + /* No vendor data to worry about */ + + ItemCount = Aml->LargeHeader.ResourceLength + + sizeof (AML_RESOURCE_LARGE_HEADER) - + ACPI_GET16 (Source); + } + + Resource->Length = Resource->Length + ItemCount; + ACPI_SET16 (Destination) = ItemCount; + break; + + + case ACPI_RSC_COUNT_SERIAL_VEN: + + ItemCount = ACPI_GET16 (Source) - Info->Value; + + Resource->Length = Resource->Length + ItemCount; + ACPI_SET16 (Destination) = ItemCount; + break; + + + case ACPI_RSC_COUNT_SERIAL_RES: + + ItemCount = (AmlResourceLength + + sizeof (AML_RESOURCE_LARGE_HEADER)) - + ACPI_GET16 (Source) - Info->Value; + + Resource->Length = Resource->Length + ItemCount; + ACPI_SET16 (Destination) = ItemCount; + break; + + + case ACPI_RSC_LENGTH: + + Resource->Length = Resource->Length + Info->Value; + break; + + + case ACPI_RSC_MOVE8: + case ACPI_RSC_MOVE16: + case ACPI_RSC_MOVE32: + case ACPI_RSC_MOVE64: + /* + * Raw data move. Use the Info value field unless ItemCount has + * been previously initialized via a COUNT opcode + */ + if (Info->Value) + { + ItemCount = Info->Value; + } + AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_GPIO_PIN: + + /* Generate and set the PIN data pointer */ + + Target = (char *) ACPI_ADD_PTR (void, Resource, + (Resource->Length - ItemCount * 2)); + *(UINT16 **) Destination = ACPI_CAST_PTR (UINT16, Target); + + /* Copy the PIN data */ + + Source = ACPI_ADD_PTR (void, Aml, ACPI_GET16 (Source)); + AcpiRsMoveData (Target, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_GPIO_RES: + + /* Generate and set the ResourceSource string pointer */ + + Target = (char *) ACPI_ADD_PTR (void, Resource, + (Resource->Length - ItemCount)); + *(UINT8 **) Destination = ACPI_CAST_PTR (UINT8, Target); + + /* Copy the ResourceSource string */ + + Source = ACPI_ADD_PTR (void, Aml, ACPI_GET16 (Source)); + AcpiRsMoveData (Target, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_SERIAL_VEN: + + /* Generate and set the Vendor Data pointer */ + + Target = (char *) ACPI_ADD_PTR (void, Resource, + (Resource->Length - ItemCount)); + *(UINT8 **) Destination = ACPI_CAST_PTR (UINT8, Target); + + /* Copy the Vendor Data */ + + Source = ACPI_ADD_PTR (void, Aml, Info->Value); + AcpiRsMoveData (Target, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_SERIAL_RES: + + /* Generate and set the ResourceSource string pointer */ + + Target = (char *) ACPI_ADD_PTR (void, Resource, + (Resource->Length - ItemCount)); + *(UINT8 **) Destination = ACPI_CAST_PTR (UINT8, Target); + + /* Copy the ResourceSource string */ + + Source = ACPI_ADD_PTR (void, Aml, (ACPI_GET16 (Source) + Info->Value)); + AcpiRsMoveData (Target, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_SET8: + + ACPI_MEMSET (Destination, Info->AmlOffset, Info->Value); + break; + + + case ACPI_RSC_DATA8: + + Target = ACPI_ADD_PTR (char, Resource, Info->Value); + ACPI_MEMCPY (Destination, Source, ACPI_GET16 (Target)); + break; + + + case ACPI_RSC_ADDRESS: + /* + * Common handler for address descriptor flags + */ + if (!AcpiRsGetAddressCommon (Resource, Aml)) + { + return_ACPI_STATUS (AE_AML_INVALID_RESOURCE_TYPE); + } + break; + + + case ACPI_RSC_SOURCE: + /* + * Optional ResourceSource (Index and String) + */ + Resource->Length += + AcpiRsGetResourceSource (AmlResourceLength, Info->Value, + Destination, Aml, NULL); + break; + + + case ACPI_RSC_SOURCEX: + /* + * Optional ResourceSource (Index and String). This is the more + * complicated case used by the Interrupt() macro + */ + Target = ACPI_ADD_PTR (char, Resource, + Info->AmlOffset + (ItemCount * 4)); + + Resource->Length += + AcpiRsGetResourceSource (AmlResourceLength, (ACPI_RS_LENGTH) + (((ItemCount - 1) * sizeof (UINT32)) + Info->Value), + Destination, Aml, Target); + break; + + + case ACPI_RSC_BITMASK: + /* + * 8-bit encoded bitmask (DMA macro) + */ + ItemCount = AcpiRsDecodeBitmask (ACPI_GET8 (Source), Destination); + if (ItemCount) + { + Resource->Length += (ItemCount - 1); + } + + Target = ACPI_ADD_PTR (char, Resource, Info->Value); + ACPI_SET8 (Target) = (UINT8) ItemCount; + break; + + + case ACPI_RSC_BITMASK16: + /* + * 16-bit encoded bitmask (IRQ macro) + */ + ACPI_MOVE_16_TO_16 (&Temp16, Source); + + ItemCount = AcpiRsDecodeBitmask (Temp16, Destination); + if (ItemCount) + { + Resource->Length += (ItemCount - 1); + } + + Target = ACPI_ADD_PTR (char, Resource, Info->Value); + ACPI_SET8 (Target) = (UINT8) ItemCount; + break; + + + case ACPI_RSC_EXIT_NE: + /* + * Control - Exit conversion if not equal + */ + switch (Info->ResourceOffset) + { + case ACPI_RSC_COMPARE_AML_LENGTH: + if (AmlResourceLength != Info->Value) + { + goto Exit; + } + break; + + case ACPI_RSC_COMPARE_VALUE: + if (ACPI_GET8 (Source) != Info->Value) + { + goto Exit; + } + break; + + default: + + ACPI_ERROR ((AE_INFO, "Invalid conversion sub-opcode")); + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + break; + + + default: + + ACPI_ERROR ((AE_INFO, "Invalid conversion opcode")); + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + Count--; + Info++; + } + +Exit: + if (!FlagsMode) + { + /* Round the resource struct length up to the next boundary (32 or 64) */ + + Resource->Length = (UINT32) ACPI_ROUND_UP_TO_NATIVE_WORD (Resource->Length); + } + return_ACPI_STATUS (AE_OK); +} + + +/******************************************************************************* + * + * FUNCTION: AcpiRsConvertResourceToAml + * + * PARAMETERS: Resource - Pointer to the resource descriptor + * Aml - Where the AML descriptor is returned + * Info - Pointer to appropriate conversion table + * + * RETURN: Status + * + * DESCRIPTION: Convert an internal resource descriptor to the corresponding + * external AML resource descriptor. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiRsConvertResourceToAml ( + ACPI_RESOURCE *Resource, + AML_RESOURCE *Aml, + ACPI_RSCONVERT_INFO *Info) +{ + void *Source = NULL; + void *Destination; + char *Target; + ACPI_RSDESC_SIZE AmlLength = 0; + UINT8 Count; + UINT16 Temp16 = 0; + UINT16 ItemCount = 0; + + + ACPI_FUNCTION_TRACE (RsConvertResourceToAml); + + + if (!Info) + { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + /* + * First table entry must be ACPI_RSC_INITxxx and must contain the + * table length (# of table entries) + */ + Count = INIT_TABLE_LENGTH (Info); + + while (Count) + { + /* + * Source is the internal resource descriptor, + * destination is the external AML byte stream buffer + */ + Source = ACPI_ADD_PTR (void, Resource, Info->ResourceOffset); + Destination = ACPI_ADD_PTR (void, Aml, Info->AmlOffset); + + switch (Info->Opcode) + { + case ACPI_RSC_INITSET: + + ACPI_MEMSET (Aml, 0, INIT_RESOURCE_LENGTH (Info)); + AmlLength = INIT_RESOURCE_LENGTH (Info); + AcpiRsSetResourceHeader (INIT_RESOURCE_TYPE (Info), AmlLength, Aml); + break; + + + case ACPI_RSC_INITGET: + break; + + + case ACPI_RSC_FLAGINIT: + /* + * Clear the flag byte + */ + ACPI_SET8 (Destination) = 0; + break; + + + case ACPI_RSC_1BITFLAG: + /* + * Mask and shift the flag bit + */ + ACPI_SET8 (Destination) |= (UINT8) + ((ACPI_GET8 (Source) & 0x01) << Info->Value); + break; + + + case ACPI_RSC_2BITFLAG: + /* + * Mask and shift the flag bits + */ + ACPI_SET8 (Destination) |= (UINT8) + ((ACPI_GET8 (Source) & 0x03) << Info->Value); + break; + + + case ACPI_RSC_3BITFLAG: + /* + * Mask and shift the flag bits + */ + ACPI_SET8 (Destination) |= (UINT8) + ((ACPI_GET8 (Source) & 0x07) << Info->Value); + break; + + + case ACPI_RSC_COUNT: + + ItemCount = ACPI_GET8 (Source); + ACPI_SET8 (Destination) = (UINT8) ItemCount; + + AmlLength = (UINT16) (AmlLength + (Info->Value * (ItemCount - 1))); + break; + + + case ACPI_RSC_COUNT16: + + ItemCount = ACPI_GET16 (Source); + AmlLength = (UINT16) (AmlLength + ItemCount); + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + + case ACPI_RSC_COUNT_GPIO_PIN: + + ItemCount = ACPI_GET16 (Source); + ACPI_SET16 (Destination) = (UINT16) AmlLength; + + AmlLength = (UINT16) (AmlLength + ItemCount * 2); + Target = ACPI_ADD_PTR (void, Aml, Info->Value); + ACPI_SET16 (Target) = (UINT16) AmlLength; + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + + case ACPI_RSC_COUNT_GPIO_VEN: + + ItemCount = ACPI_GET16 (Source); + ACPI_SET16 (Destination) = (UINT16) ItemCount; + + AmlLength = (UINT16) (AmlLength + (Info->Value * ItemCount)); + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + + case ACPI_RSC_COUNT_GPIO_RES: + + /* Set resource source string length */ + + ItemCount = ACPI_GET16 (Source); + ACPI_SET16 (Destination) = (UINT16) AmlLength; + + /* Compute offset for the Vendor Data */ + + AmlLength = (UINT16) (AmlLength + ItemCount); + Target = ACPI_ADD_PTR (void, Aml, Info->Value); + + /* Set vendor offset only if there is vendor data */ + + if (Resource->Data.Gpio.VendorLength) + { + ACPI_SET16 (Target) = (UINT16) AmlLength; + } + + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + + case ACPI_RSC_COUNT_SERIAL_VEN: + + ItemCount = ACPI_GET16 (Source); + ACPI_SET16 (Destination) = ItemCount + Info->Value; + AmlLength = (UINT16) (AmlLength + ItemCount); + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + + case ACPI_RSC_COUNT_SERIAL_RES: + + ItemCount = ACPI_GET16 (Source); + AmlLength = (UINT16) (AmlLength + ItemCount); + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + + case ACPI_RSC_LENGTH: + + AcpiRsSetResourceLength (Info->Value, Aml); + break; + + + case ACPI_RSC_MOVE8: + case ACPI_RSC_MOVE16: + case ACPI_RSC_MOVE32: + case ACPI_RSC_MOVE64: + + if (Info->Value) + { + ItemCount = Info->Value; + } + AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_GPIO_PIN: + + Destination = (char *) ACPI_ADD_PTR (void, Aml, + ACPI_GET16 (Destination)); + Source = * (UINT16 **) Source; + AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_GPIO_RES: + + /* Used for both ResourceSource string and VendorData */ + + Destination = (char *) ACPI_ADD_PTR (void, Aml, + ACPI_GET16 (Destination)); + Source = * (UINT8 **) Source; + AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_SERIAL_VEN: + + Destination = (char *) ACPI_ADD_PTR (void, Aml, + (AmlLength - ItemCount)); + Source = * (UINT8 **) Source; + AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_MOVE_SERIAL_RES: + + Destination = (char *) ACPI_ADD_PTR (void, Aml, + (AmlLength - ItemCount)); + Source = * (UINT8 **) Source; + AcpiRsMoveData (Destination, Source, ItemCount, Info->Opcode); + break; + + + case ACPI_RSC_ADDRESS: + + /* Set the Resource Type, General Flags, and Type-Specific Flags */ + + AcpiRsSetAddressCommon (Aml, Resource); + break; + + + case ACPI_RSC_SOURCEX: + /* + * Optional ResourceSource (Index and String) + */ + AmlLength = AcpiRsSetResourceSource ( + Aml, (ACPI_RS_LENGTH) AmlLength, Source); + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + + case ACPI_RSC_SOURCE: + /* + * Optional ResourceSource (Index and String). This is the more + * complicated case used by the Interrupt() macro + */ + AmlLength = AcpiRsSetResourceSource (Aml, Info->Value, Source); + AcpiRsSetResourceLength (AmlLength, Aml); + break; + + + case ACPI_RSC_BITMASK: + /* + * 8-bit encoded bitmask (DMA macro) + */ + ACPI_SET8 (Destination) = (UINT8) + AcpiRsEncodeBitmask (Source, + *ACPI_ADD_PTR (UINT8, Resource, Info->Value)); + break; + + + case ACPI_RSC_BITMASK16: + /* + * 16-bit encoded bitmask (IRQ macro) + */ + Temp16 = AcpiRsEncodeBitmask (Source, + *ACPI_ADD_PTR (UINT8, Resource, Info->Value)); + ACPI_MOVE_16_TO_16 (Destination, &Temp16); + break; + + + case ACPI_RSC_EXIT_LE: + /* + * Control - Exit conversion if less than or equal + */ + if (ItemCount <= Info->Value) + { + goto Exit; + } + break; + + + case ACPI_RSC_EXIT_NE: + /* + * Control - Exit conversion if not equal + */ + switch (COMPARE_OPCODE (Info)) + { + case ACPI_RSC_COMPARE_VALUE: + + if (*ACPI_ADD_PTR (UINT8, Resource, + COMPARE_TARGET (Info)) != COMPARE_VALUE (Info)) + { + goto Exit; + } + break; + + default: + + ACPI_ERROR ((AE_INFO, "Invalid conversion sub-opcode")); + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + break; + + + case ACPI_RSC_EXIT_EQ: + /* + * Control - Exit conversion if equal + */ + if (*ACPI_ADD_PTR (UINT8, Resource, + COMPARE_TARGET (Info)) == COMPARE_VALUE (Info)) + { + goto Exit; + } + break; + + + default: + + ACPI_ERROR ((AE_INFO, "Invalid conversion opcode")); + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + Count--; + Info++; + } + +Exit: + return_ACPI_STATUS (AE_OK); +} + + +#if 0 +/* Previous resource validations */ + + if (Aml->ExtAddress64.RevisionID != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) + { + return_ACPI_STATUS (AE_SUPPORT); + } + + if (Resource->Data.StartDpf.PerformanceRobustness >= 3) + { + return_ACPI_STATUS (AE_AML_BAD_RESOURCE_VALUE); + } + + if (((Aml->Irq.Flags & 0x09) == 0x00) || + ((Aml->Irq.Flags & 0x09) == 0x09)) + { + /* + * Only [ActiveHigh, EdgeSensitive] or [ActiveLow, LevelSensitive] + * polarity/trigger interrupts are allowed (ACPI spec, section + * "IRQ Format"), so 0x00 and 0x09 are illegal. + */ + ACPI_ERROR ((AE_INFO, + "Invalid interrupt polarity/trigger in resource list, 0x%X", + Aml->Irq.Flags)); + return_ACPI_STATUS (AE_BAD_DATA); + } + + Resource->Data.ExtendedIrq.InterruptCount = Temp8; + if (Temp8 < 1) + { + /* Must have at least one IRQ */ + + return_ACPI_STATUS (AE_AML_BAD_RESOURCE_LENGTH); + } + + if (Resource->Data.Dma.Transfer == 0x03) + { + ACPI_ERROR ((AE_INFO, + "Invalid DMA.Transfer preference (3)")); + return_ACPI_STATUS (AE_BAD_DATA); + } +#endif + + |