diff options
Diffstat (limited to 'src/arm/imx6qdl-sabresd.dtsi')
| -rw-r--r-- | src/arm/imx6qdl-sabresd.dtsi | 116 |
1 files changed, 114 insertions, 2 deletions
diff --git a/src/arm/imx6qdl-sabresd.dtsi b/src/arm/imx6qdl-sabresd.dtsi index 58055ceec6dc..b72b6fa47580 100644 --- a/src/arm/imx6qdl-sabresd.dtsi +++ b/src/arm/imx6qdl-sabresd.dtsi @@ -10,6 +10,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -146,6 +147,36 @@ }; }; +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; + data-shift = <12>; /* Lines 19:12 used */ + hsync-active = <1>; + vsync-active = <1>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&ov5642_to_ipu1_csi0_mux>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; @@ -178,7 +209,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 0>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -213,7 +244,32 @@ 0x8014 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; - }; + }; + + ov5642: camera@3c { + compatible = "ovti,ov5642"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + reg = <0x3c>; + DOVDD-supply = <&vgen4_reg>; /* 1.8v */ + AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 + rev B board is VGEN5 */ + DVDD-supply = <&vgen2_reg>; /* 1.5v*/ + powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + status = "disabled"; + + port { + ov5642_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; }; &i2c2 { @@ -222,6 +278,32 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <&vgen4_reg>; /* 1.8v */ + AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 + rev B board is VGEN5 */ + DVDD-supply = <&vgen2_reg>; /* 1.5v*/ + powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + pmic: pfuze100@08 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -425,6 +507,36 @@ >; }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 + >; + }; + + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 |