diff options
Diffstat (limited to 'src/arm/kirkwood-6282.dtsi')
| -rw-r--r-- | src/arm/kirkwood-6282.dtsi | 138 |
1 files changed, 138 insertions, 0 deletions
diff --git a/src/arm/kirkwood-6282.dtsi b/src/arm/kirkwood-6282.dtsi new file mode 100644 index 000000000000..4680eec990f0 --- /dev/null +++ b/src/arm/kirkwood-6282.dtsi @@ -0,0 +1,138 @@ +/ { + mbus { + pciec: pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; + + pcie0: pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + + pcie1: pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 10>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 18>; + status = "disabled"; + }; + }; + }; + ocp@f1000000 { + + pinctrl: pin-controller@10000 { + compatible = "marvell,88f6282-pinctrl"; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp5", "mpp21", "mpp23"; + marvell,function = "sata0"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp4", "mpp20", "mpp22"; + marvell,function = "sata1"; + }; + + /* + * Default I2C1 pinctrl setting on mpp36/mpp37, + * overwrite marvell,pins on board level if required. + */ + pmx_twsi1: pmx-twsi1 { + marvell,pins = "mpp36", "mpp37"; + marvell,function = "twsi1"; + }; + + pmx_sdio: pmx-sdio { + marvell,pins = "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "sdio"; + }; + }; + + thermal: thermal@10078 { + compatible = "marvell,kirkwood-thermal"; + reg = <0x10078 0x4>; + status = "okay"; + }; + + rtc: rtc@10300 { + compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <53>; + clocks = <&gate_clk 7>; + }; + + i2c1: i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <32>; + clock-frequency = <100000>; + clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_twsi1>; + pinctrl-names = "default"; + status = "disabled"; + }; + + sata: sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + clocks = <&gate_clk 14>, <&gate_clk 15>; + clock-names = "0", "1"; + phys = <&sata_phy0>, <&sata_phy1>; + phy-names = "port0", "port1"; + status = "disabled"; + }; + + sdio: mvsdio@90000 { + compatible = "marvell,orion-sdio"; + reg = <0x90000 0x200>; + interrupts = <28>; + clocks = <&gate_clk 4>; + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + cap-mmc-highspeed; + status = "disabled"; + }; + }; +}; |