summaryrefslogtreecommitdiff
path: root/sys/boot/fdt/dts/arm/zybo.dts
diff options
context:
space:
mode:
Diffstat (limited to 'sys/boot/fdt/dts/arm/zybo.dts')
-rw-r--r--sys/boot/fdt/dts/arm/zybo.dts285
1 files changed, 69 insertions, 216 deletions
diff --git a/sys/boot/fdt/dts/arm/zybo.dts b/sys/boot/fdt/dts/arm/zybo.dts
index 2884d2b99f26..c4cdc232b9cd 100644
--- a/sys/boot/fdt/dts/arm/zybo.dts
+++ b/sys/boot/fdt/dts/arm/zybo.dts
@@ -1,216 +1,69 @@
-/*-
- * Copyright (c) 2015 The FreeBSD Foundation
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD$
- */
-
-/dts-v1/;
-
-/ {
- model = "zybo";
- compatible = "digilent,zybo";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&GIC>;
-
- // cpus {
- // #address-cells = <1>;
- // #size-cells = <0>;
- // cpu@0 {
- // device-type = "cpu";
- // model = "ARM Cortex-A9";
- // };
- // };
-
- memory {
- // First megabyte isn't accessible by all interconnect masters.
- device_type = "memory";
- reg = <0x100000 0x1ff00000>; /* 511MB RAM at 0x100000 */
- };
-
- // Zynq PS System registers.
- //
- ps7sys@f8000000 {
- device_type = "soc";
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0xf8000000 0xf10000>;
-
- // SLCR block
- slcr: slcr@7000 {
- compatible = "xlnx,zy7_slcr";
- reg = <0x0 0x1000>;
- clock-frequency = <50000000>; // 50Mhz PS_CLK
- };
-
- // Interrupt controller
- GIC: gic {
- compatible = "arm,gic";
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- reg = <0xf01000 0x1000>, // distributer registers
- <0xf00100 0x0100>; // CPU if registers
- };
-
- // L2 cache controller
- pl310@f02000 {
- compatible = "arm,pl310";
- reg = <0xf02000 0x1000>;
- interrupts = <34>;
- interrupt-parent = <&GIC>;
- };
-
- // Device Config
- devcfg: devcfg@7000 {
- compatible = "xlnx,zy7_devcfg";
- reg = <0x7000 0x1000>;
- interrupts = <40>;
- interrupt-parent = <&GIC>;
- };
-
- // triple timer counters0,1
- ttc0: ttc@1000 {
- compatible = "xlnx,ttc";
- reg = <0x1000 0x1000>;
- };
- ttc1: ttc@2000 {
- compatible = "xlnx,ttc";
- reg = <0x2000 0x1000>;
- };
-
- // ARM Cortex A9 TWD Timer
- timer@f00600 {
- compatible = "arm,mpcore-timers";
- clock-frequency = <325000000>; // 325Mhz
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0xf00200 0x100>, // Global Timer Regs
- <0xf00600 0x20>; // Private Timer Regs
- interrupts = < 27 29 >;
- interrupt-parent = <&GIC>;
- };
-
- // system watch-dog timer
- swdt@5000 {
- device_type = "watchdog";
- compatible = "xlnx,zy7_wdt";
- reg = <0x5000 0x1000>;
- interrupts = <41>;
- interrupt-parent = <&GIC>;
- };
-
- scuwdt@f00620 {
- device_type = "watchdog";
- compatible = "arm,mpcore_wdt";
- reg = <0xf00620 0x20>;
- interrupts = <30>;
- interrupt-parent = <&GIC>;
- reset = <1>;
- };
- }; // pssys@f8000000
-
- // Zynq PS I/O Peripheral registers.
- //
- ps7io@e0000000 {
- device_type = "soc";
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0xe0000000 0x300000>;
-
- // uart0: uart@0000 {
- // device_type = "serial";
- // compatible = "cadence,uart";
- // reg = <0x0000 0x1000>;
- // interrupts = <59>;
- // interrupt-parent = <&GIC>;
- // clock-frequency = <50000000>;
- // };
-
- uart1: uart@1000 {
- device_type = "serial";
- compatible = "cadence,uart";
- reg = <0x1000 0x1000>;
- interrupts = <82>;
- interrupt-parent = <&GIC>;
- clock-frequency = <50000000>;
- current-speed = <115200>;
- };
-
- gpio: gpio@a000 {
- compatible = "xlnx,zy7_gpio";
- reg = <0xa000 0x1000>;
- interrupts = <52>;
- interrupt-parent = <&GIC>;
- };
-
- // GigE
- eth0: eth@b000 {
- // device_type = "network";
-
- compatible = "cadence,gem";
- reg = <0xb000 0x1000>;
- interrupts = <54 55>;
- interrupt-parent = <&GIC>;
- ref-clock-num = <0>;
- };
-
- // SDIO
- sdhci0: sdhci@100000 {
- compatible = "xlnx,zy7_sdhci";
- reg = <0x100000 0x1000>;
- interrupts = <56>;
- interrupt-parent = <&GIC>;
- max-frequency = <50000000>;
- };
-
- // QSPI
- qspi0: qspi@d000 {
- compatible = "xlnx,zy7_qspi";
- reg = <0xd000 0x1000>;
- interrupts = <51>;
- interrupt-parent = <&GIC>;
- spi-clock = <50000000>;
- ref-clock = <200000000>;
- };
-
- // USB
- ehci0: ehci@2000 {
- compatible = "xlnx,zy7_ehci";
- reg = <0x2000 0x1000>;
- interrupts = <53>;
- interrupt-parent = <&GIC>;
- };
-
- }; // ps7io@e0000000
-
- chosen {
- stdin = &uart1;
- stdout = &uart1;
- };
-};
-
+/*-
+ * Copyright (c) 2016 The FreeBSD Foundation
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "zybo";
+ compatible = "digilent,zybo";
+
+ memory {
+ // First megabyte isn't accessible by all interconnect masters.
+ device_type = "memory";
+ reg = <0x100000 0x1ff00000>; /* 511MB RAM at 0x100000 */
+ };
+
+ chosen {
+ stdin = &uart1;
+ stdout = &uart1;
+ };
+};
+
+&slcr {
+ clock-frequency = <50000000>; // 50Mhz PS_CLK
+};
+
+&global_timer {
+ clock-frequency = <325000000>; // 325Mhz
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&eth0 {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-30 21:36:58 +0000