diff options
Diffstat (limited to 'sys/gnu/dts/arm/at91sam9n12ek.dts')
-rw-r--r-- | sys/gnu/dts/arm/at91sam9n12ek.dts | 101 |
1 files changed, 84 insertions, 17 deletions
diff --git a/sys/gnu/dts/arm/at91sam9n12ek.dts b/sys/gnu/dts/arm/at91sam9n12ek.dts index 9575c0d895c9..ca4ddf86817a 100644 --- a/sys/gnu/dts/arm/at91sam9n12ek.dts +++ b/sys/gnu/dts/arm/at91sam9n12ek.dts @@ -14,7 +14,8 @@ compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9"; chosen { - bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; + bootargs = "root=/dev/mtdblock1 rw rootfstype=jffs2"; + stdout-path = "serial0:115200n8"; }; memory { @@ -22,15 +23,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <16000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -70,10 +62,6 @@ }; }; - i2c1: i2c@f8014000 { - status = "okay"; - }; - mmc0: mmc@f0008000 { pinctrl-0 = < &pinctrl_board_mmc0 @@ -108,6 +96,13 @@ <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; }; }; + + usb1 { + pinctrl_usb1_vbus_sense: usb1_vbus_sense { + atmel,pins = + <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio usb vbus sense, no pull up and deglitch */ + }; + }; }; spi0: spi@f0000000 { @@ -120,9 +115,36 @@ }; }; + hlcdc: hlcdc@f8038000 { + status = "okay"; + + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + }; + + usb1: gadget@f803c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus_sense>; + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + watchdog@fffffe40 { status = "okay"; }; + + rtc@fffffeb0 { + status = "okay"; + }; }; nand0: nand@40000000 { @@ -142,6 +164,23 @@ }; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 50000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <&bl_reg>; + status = "okay"; + }; + + bl_reg: backlight_regulator { + compatible = "regulator-fixed"; + regulator-name = "backlight-power-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + leds { compatible = "gpio-leds"; @@ -152,13 +191,13 @@ }; d9 { - label = "d6"; + label = "d9"; gpios = <&pioB 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d10 { - label = "d7"; + label = "d10"; gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; @@ -171,10 +210,38 @@ label = "Enter"; gpios = <&pioB 3 GPIO_ACTIVE_LOW>; linux,code = <28>; - gpio-key,wakeup; + wakeup-source; }; }; + panel: panel { + compatible = "qd,qd43003c0-40", "simple-panel"; + backlight = <&backlight>; + power-supply = <&panel_reg>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + panel_reg: panel_regulator { + compatible = "regulator-fixed"; + regulator-name = "panel-power-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "okay"; + }; + sound { compatible = "atmel,asoc-wm8904"; pinctrl-names = "default"; |