diff options
Diffstat (limited to 'sys/gnu/dts/arm/exynos5422-cpu-thermal.dtsi')
| -rw-r--r-- | sys/gnu/dts/arm/exynos5422-cpu-thermal.dtsi | 46 |
1 files changed, 45 insertions, 1 deletions
diff --git a/sys/gnu/dts/arm/exynos5422-cpu-thermal.dtsi b/sys/gnu/dts/arm/exynos5422-cpu-thermal.dtsi index 2b289d7c0d13..3e4c4ad96d63 100644 --- a/sys/gnu/dts/arm/exynos5422-cpu-thermal.dtsi +++ b/sys/gnu/dts/arm/exynos5422-cpu-thermal.dtsi @@ -16,7 +16,7 @@ thermal-zones { cpu0_thermal: cpu0-thermal { thermal-sensors = <&tmu_cpu0 0>; - polling-delay-passive = <0>; + polling-delay-passive = <250>; polling-delay = <0>; trips { cpu_alert0: cpu-alert-0 { @@ -39,6 +39,23 @@ hysteresis = <0>; /* millicelsius */ type = "critical"; }; + /* + * Exyunos542x support only 4 trip-points + * so for these polling mode is required. + * Start polling at temperature level of last + * interrupt-driven trip: cpu_alert2 + */ + cpu_alert3: cpu-alert-3 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert4: cpu-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + }; cooling-maps { map0 { @@ -53,6 +70,33 @@ trip = <&cpu_alert2>; cooling-device = <&fan0 2 3>; }; + /* + * When reaching cpu_alert3, reduce CPU + * by 2 steps. On Exynos5422/5800 that would + * be: 1500 MHz and 1100 MHz. + */ + map3 { + trip = <&cpu_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu_alert3>; + cooling-device = <&cpu4 0 2>; + }; + + /* + * When reaching cpu_alert4, reduce CPU + * further, down to 600 MHz (11 steps for big, + * 7 steps for LITTLE). + */ + map5 { + trip = <&cpu_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu_alert4>; + cooling-device = <&cpu4 3 11>; + }; }; }; }; |