summaryrefslogtreecommitdiff
path: root/sys/gnu/dts/arm/qcom-msm8974.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'sys/gnu/dts/arm/qcom-msm8974.dtsi')
-rw-r--r--sys/gnu/dts/arm/qcom-msm8974.dtsi222
1 files changed, 205 insertions, 17 deletions
diff --git a/sys/gnu/dts/arm/qcom-msm8974.dtsi b/sys/gnu/dts/arm/qcom-msm8974.dtsi
index 9a84eb0cbbe6..4b161b809dd5 100644
--- a/sys/gnu/dts/arm/qcom-msm8974.dtsi
+++ b/sys/gnu/dts/arm/qcom-msm8974.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/interconnect/qcom,msm8974.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
@@ -20,17 +21,17 @@
#size-cells = <1>;
ranges;
- mpss@8000000 {
+ mpss_region: mpss@8000000 {
reg = <0x08000000 0x5100000>;
no-map;
};
- mba@d100000 {
+ mba_region: mba@d100000 {
reg = <0x0d100000 0x100000>;
no-map;
};
- reserved@d200000 {
+ wcnss_region: wcnss@d200000 {
reg = <0x0d200000 0xa00000>;
no-map;
};
@@ -61,8 +62,11 @@
};
rmtfs@fd80000 {
+ compatible = "qcom,rmtfs-mem";
reg = <0x0fd80000 0x180000>;
no-map;
+
+ qcom,client-id = <1>;
};
};
@@ -356,6 +360,15 @@
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
+
+ smd-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 8>;
+ qcom,smd-edge = <1>;
+
+ label = "lpass";
+ };
};
smem {
@@ -795,6 +808,119 @@
clock-names = "core";
};
+ remoteproc@fc880000 {
+ compatible = "qcom,msm8974-mss-pil";
+ reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ cx-supply = <&pm8841_s2>;
+ mss-supply = <&pm8841_s3>;
+ mx-supply = <&pm8841_s1>;
+ pll-supply = <&pm8941_l12>;
+
+ qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ mba {
+ memory-region = <&mba_region>;
+ };
+
+ mpss {
+ memory-region = <&mpss_region>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 12>;
+ qcom,smd-edge = <0>;
+
+ label = "modem";
+ };
+ };
+
+ pronto: remoteproc@fb21b000 {
+ compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+ reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ memory-region = <&wcnss_region>;
+
+ interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ vddpx-supply = <&pm8941_s3>;
+
+ qcom,smem-states = <&wcnss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ iris {
+ compatible = "qcom,wcn3680";
+
+ clocks = <&rpmcc RPM_SMD_CXO_A2>;
+ clock-names = "xo";
+
+ vddxo-supply = <&pm8941_l6>;
+ vddrfa-supply = <&pm8941_l11>;
+ vddpa-supply = <&pm8941_l19>;
+ vdddig-supply = <&pm8941_s3>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+ status = "disabled";
+
+ qcom,mmio = <&pronto>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
+
msmgpio: pinctrl@fd510000 {
compatible = "qcom,msm8974-pinctrl";
reg = <0xfd510000 0x4000>;
@@ -1179,6 +1305,79 @@
};
};
+ ocmem@fdd00000 {
+ compatible = "qcom,msm8974-ocmem";
+ reg = <0xfdd00000 0x2000>,
+ <0xfec00000 0x180000>;
+ reg-names = "ctrl",
+ "mem";
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+ <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+ clock-names = "core",
+ "iface";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gmu_sram: gmu-sram@0 {
+ reg = <0x0 0x100000>;
+ };
+ };
+
+ bimc: interconnect@fc380000 {
+ reg = <0xfc380000 0x6a000>;
+ compatible = "qcom,msm8974-bimc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
+ snoc: interconnect@fc460000 {
+ reg = <0xfc460000 0x4000>;
+ compatible = "qcom,msm8974-snoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
+ pnoc: interconnect@fc468000 {
+ reg = <0xfc468000 0x4000>;
+ compatible = "qcom,msm8974-pnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+ <&rpmcc RPM_SMD_PNOC_A_CLK>;
+ };
+
+ ocmemnoc: interconnect@fc470000 {
+ reg = <0xfc470000 0x4000>;
+ compatible = "qcom,msm8974-ocmemnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+ <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+ };
+
+ mmssnoc: interconnect@fc478000 {
+ reg = <0xfc478000 0x4000>;
+ compatible = "qcom,msm8974-mmssnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&mmcc MMSS_S0_AXI_CLK>,
+ <&mmcc MMSS_S0_AXI_CLK>;
+ };
+
+ cnoc: interconnect@fc480000 {
+ reg = <0xfc480000 0x4000>;
+ compatible = "qcom,msm8974-cnoc";
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+ <&rpmcc RPM_SMD_CNOC_A_CLK>;
+ };
+
mdss: mdss@fd900000 {
status = "disabled";
@@ -1225,6 +1424,9 @@
"core",
"vsync";
+ interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
+ interconnect-names = "mdp0-mem";
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1325,20 +1527,6 @@
smd {
compatible = "qcom,smd";
- adsp {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 8>;
- qcom,smd-edge = <1>;
- };
-
- modem {
- interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 12>;
- qcom,smd-edge = <0>;
- };
-
rpm {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;