diff options
Diffstat (limited to 'sys/gnu/dts/arm/sama5d2.dtsi')
| -rw-r--r-- | sys/gnu/dts/arm/sama5d2.dtsi | 144 |
1 files changed, 138 insertions, 6 deletions
diff --git a/sys/gnu/dts/arm/sama5d2.dtsi b/sys/gnu/dts/arm/sama5d2.dtsi index 3f750f6170f2..2827e7ab5ebc 100644 --- a/sys/gnu/dts/arm/sama5d2.dtsi +++ b/sys/gnu/dts/arm/sama5d2.dtsi @@ -88,12 +88,6 @@ #clock-cells = <0>; clock-frequency = <0>; }; - - adc_op_clk: adc_op_clk{ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - }; }; ns_sram: sram@00200000 { @@ -263,6 +257,44 @@ cache-level = <2>; }; + nand0: nand@80000000 { + compatible = "atmel,sama5d2-nand"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = < /* EBI CS3 */ + 0x80000000 0x08000000 + /* SMC PMECC regs */ + 0xf8014070 0x00000490 + /* SMC PMECC Error Location regs */ + 0xf8014500 0x00000200 + /* ROM Galois tables */ + 0x00040000 0x00018000 + >; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; + atmel,has-pmecc; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; + status = "disabled"; + + nfc@c0000000 { + compatible = "atmel,sama5d3-nfc"; + #address-cells = <1>; + #size-cells = <1>; + reg = < /* NFC Command Registers */ + 0xc0000000 0x08000000 + /* NFC HSMC regs */ + 0xf8014000 0x00000070 + /* NFC SRAM banks */ + 0x00100000 0x00100000 + >; + clocks = <&hsmc_clk>; + atmel,write-by-sram; + }; + }; + sdmmc0: sdio-host@a0000000 { compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; @@ -287,6 +319,32 @@ #size-cells = <1>; ranges; + hlcdc: hlcdc@f0000000 { + compatible = "atmel,sama5d2-hlcdc"; + reg = <0xf0000000 0x2000>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + #pwm-cells = <3>; + }; + }; + ramc0: ramc@f000c000 { compatible = "atmel,sama5d3-ddramc"; reg = <0xf000c000 0x200>; @@ -880,6 +938,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(35))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>; + dma-names = "tx", "rx"; clocks = <&uart0_clk>; clock-names = "usart"; status = "disabled"; @@ -889,6 +954,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x100>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(38))>; + dma-names = "tx", "rx"; clocks = <&uart1_clk>; clock-names = "usart"; status = "disabled"; @@ -898,6 +970,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(39))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(40))>; + dma-names = "tx", "rx"; clocks = <&uart2_clk>; clock-names = "usart"; status = "disabled"; @@ -920,6 +999,11 @@ status = "disabled"; }; + sfr: sfr@f8030000 { + compatible = "atmel,sama5d2-sfr", "syscon"; + reg = <0xf8030000 0x98>; + }; + flx0: flexcom@f8034000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xf8034000 0x200>; @@ -946,6 +1030,15 @@ clocks = <&clk32k>; }; + shdwc@f8048010 { + compatible = "atmel,sama5d2-shdwc"; + reg = <0xf8048010 0x10>; + clocks = <&clk32k>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + }; + pit: timer@f8048030 { compatible = "atmel,at91sam9260-pit"; reg = <0xf8048030 0x10>; @@ -957,6 +1050,7 @@ compatible = "atmel,sama5d4-wdt"; reg = <0xf8048040 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; status = "disabled"; }; @@ -1016,6 +1110,13 @@ compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(41))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(42))>; + dma-names = "tx", "rx"; clocks = <&uart3_clk>; clock-names = "usart"; status = "disabled"; @@ -1024,6 +1125,13 @@ uart4: serial@fc00c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc00c000 0x100>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(43))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(44))>; + dma-names = "tx", "rx"; interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&uart4_clk>; clock-names = "usart"; @@ -1060,6 +1168,13 @@ status = "disabled"; }; + trng@fc01c000 { + compatible = "atmel,at91sam9g45-trng"; + reg = <0xfc01c000 0x100>; + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&trng_clk>; + }; + aic: interrupt-controller@fc020000 { #interrupt-cells = <3>; compatible = "atmel,sama5d2-aic"; @@ -1085,6 +1200,18 @@ status = "disabled"; }; + adc: adc@fc030000 { + compatible = "atmel,sama5d2-adc"; + reg = <0xfc030000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&adc_clk>; + clock-names = "adc_clk"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + status = "disabled"; + }; + pioA: pinctrl@fc038000 { compatible = "atmel,sama5d2-pinctrl"; reg = <0xfc038000 0x600>; @@ -1114,6 +1241,11 @@ clock-names = "tdes_clk"; status = "okay"; }; + + chipid@fc069000 { + compatible = "atmel,sama5d2-chipid"; + reg = <0xfc069000 0x8>; + }; }; }; }; |