/* * Product specific probe and attach routines for: * 3940, 2940, aic7895, aic7890, aic7880, * aic7870, aic7860 and aic7850 SCSI controllers * * Copyright (c) 1995, 1996, 1997, 1998 Justin T. Gibbs * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Where this Software is combined with software released under the terms of * the GNU Public License ("GPL") and the terms of the GPL would require the * combined work to also be released under the terms of the GPL, the terms * and conditions of this License will apply in addition to those of the * GPL with the exception of any terms or conditions of this License that * conflict with, or are expressly prohibited by, the GPL. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $Id: ahc_pci.c,v 1.5.2.1 1999/02/11 07:16:04 gibbs Exp $ */ #include #if NPCI > 0 #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PCI_BASEADR0 PCI_MAP_REG_START /* I/O Address */ #define PCI_BASEADR1 PCI_MAP_REG_START + 4 /* Mem I/O Address */ #define PCI_DEVICE_ID_ADAPTEC_398XU 0x83789004ul #define PCI_DEVICE_ID_ADAPTEC_3940U 0x82789004ul #define PCI_DEVICE_ID_ADAPTEC_2944U 0x84789004ul #define PCI_DEVICE_ID_ADAPTEC_2940U 0x81789004ul #define PCI_DEVICE_ID_ADAPTEC_2940AU 0x61789004ul #define PCI_DEVICE_ID_ADAPTEC_2940U2 0x00109005ul #define PCI_DEVICE_ID_ADAPTEC_398X 0x73789004ul #define PCI_DEVICE_ID_ADAPTEC_3940 0x72789004ul #define PCI_DEVICE_ID_ADAPTEC_2944 0x74789004ul #define PCI_DEVICE_ID_ADAPTEC_2940 0x71789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7890 0x001F9005ul #define PCI_DEVICE_ID_ADAPTEC_AIC7895 0x78959004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7896 0x005F9005ul #define PCI_DEVICE_ID_ADAPTEC_AIC7880 0x80789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7870 0x70789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7860 0x60789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7855 0x55789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7850 0x50789004ul #define PCI_DEVICE_ID_ADAPTEC_AIC7810 0x10789004ul #define AHC_394X_SLOT_CHANNEL_A 4 #define AHC_394X_SLOT_CHANNEL_B 5 #define AHC_398X_SLOT_CHANNEL_A 4 #define AHC_398X_SLOT_CHANNEL_B 8 #define AHC_398X_SLOT_CHANNEL_C 12 #define DEVCONFIG 0x40 #define SCBSIZE32 0x00010000ul /* aic789X only */ #define MPORTMODE 0x00000400ul /* aic7870 only */ #define RAMPSM 0x00000200ul /* aic7870 only */ #define VOLSENSE 0x00000100ul #define SCBRAMSEL 0x00000080ul #define MRDCEN 0x00000040ul #define EXTSCBTIME 0x00000020ul /* aic7870 only */ #define EXTSCBPEN 0x00000010ul /* aic7870 only */ #define BERREN 0x00000008ul #define DACEN 0x00000004ul #define STPWLEVEL 0x00000002ul #define DIFACTNEGEN 0x00000001ul /* aic7870 only */ #define CSIZE_LATTIME 0x0c #define CACHESIZE 0x0000003ful /* only 5 bits */ #define LATTIME 0x0000ff00ul static void check_extport(struct ahc_softc *ahc, u_int8_t *sxfrctl1); static void configure_termination(struct ahc_softc *ahc, struct seeprom_config *sc, struct seeprom_descriptor *sd, u_int8_t *sxfrctl1); static void ahc_ultra2_term_detect(struct ahc_softc *ahc, int *enableSEC_low, int *enableSEC_high, int *enablePRI_low, int *enablePRI_high, int *eeprom_present); static void aic787X_cable_detect(struct ahc_softc *ahc, int *internal50_present, int *internal68_present, int *externalcable_present, int *eeprom_present); static void aic785X_cable_detect(struct ahc_softc *ahc, int *internal50_present, int *externalcable_present, int *eeprom_present); static int acquire_seeprom(struct ahc_softc *ahc, struct seeprom_descriptor *sd); static void release_seeprom(struct seeprom_descriptor *sd); static void write_brdctl(struct ahc_softc *ahc, u_int8_t value); static u_int8_t read_brdctl(struct ahc_softc *ahc); static struct ahc_softc *first_398X; static const char* ahc_pci_probe(pcici_t tag, pcidi_t type); static void ahc_pci_attach(pcici_t config_id, int unit); /* Exported for use in the ahc_intr routine */ void ahc_pci_intr(struct ahc_softc *ahc); static struct pci_device ahc_pci_driver = { "ahc", ahc_pci_probe, ahc_pci_attach, &ahc_unit, NULL }; DATA_SET (pcidevice_set, ahc_pci_driver); static const char* ahc_pci_probe (pcici_t tag, pcidi_t type) { switch (type) { case PCI_DEVICE_ID_ADAPTEC_398XU: return ("Adaptec 398X Ultra SCSI RAID adapter"); break; case PCI_DEVICE_ID_ADAPTEC_3940U: return ("Adaptec 3940 Ultra SCSI host adapter"); break; case PCI_DEVICE_ID_ADAPTEC_398X: return ("Adaptec 398X SCSI RAID adapter"); break; case PCI_DEVICE_ID_ADAPTEC_3940: return ("Adaptec 3940 SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2944U: return ("Adaptec 2944 Ultra SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2940U: return ("Adaptec 2940 Ultra SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2940U2: return ("Adaptec 2940 Ultra2 SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2944: return ("Adaptec 2944 SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2940: return ("Adaptec 2940 SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_2940AU: return ("Adaptec 2940A Ultra SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7895: return ("Adaptec aic7895 Ultra SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7890: return ("Adaptec aic7890/91 Ultra2 SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7896: return ("Adaptec aic7896/97 Ultra2 SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7880: return ("Adaptec aic7880 Ultra SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7870: return ("Adaptec aic7870 SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7860: return ("Adaptec aic7860 SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7855: return ("Adaptec aic7855 SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7850: return ("Adaptec aic7850 SCSI adapter"); break; case PCI_DEVICE_ID_ADAPTEC_AIC7810: return ("Adaptec aic7810 RAID memory controller"); break; default: break; } return (0); } static void ahc_pci_attach(pcici_t config_id, int unit) { pci_port_t io_port; struct ahc_softc *ahc; u_int32_t id; u_int32_t command; struct scb_data *shared_scb_data; int opri; ahc_chip ahc_t = AHC_NONE; ahc_feature ahc_fe = AHC_FENONE; ahc_flag ahc_f = AHC_FNONE; vm_offset_t vaddr; vm_offset_t paddr; u_int our_id = 0; u_int sxfrctl1; u_int scsiseq; int error; char channel; if (config_id->func == 1) channel = 'B'; else channel = 'A'; shared_scb_data = NULL; vaddr = NULL; paddr = NULL; io_port = 0; command = pci_conf_read(config_id, PCI_COMMAND_STATUS_REG); #ifdef AHC_ALLOW_MEMIO if ((command & PCI_COMMAND_MEM_ENABLE) == 0 || (pci_map_mem(config_id, PCI_BASEADR1, &vaddr, &paddr)) == 0) #endif if ((command & PCI_COMMAND_IO_ENABLE) == 0 || (pci_map_port(config_id, PCI_BASEADR0, &io_port)) == 0) return; switch ((id = pci_conf_read(config_id, PCI_ID_REG))) { case PCI_DEVICE_ID_ADAPTEC_398XU: case PCI_DEVICE_ID_ADAPTEC_398X: if (id == PCI_DEVICE_ID_ADAPTEC_398XU) { ahc_t = AHC_AIC7880; ahc_fe = AHC_AIC7880_FE; } else { ahc_t = AHC_AIC7870; ahc_fe = AHC_AIC7870_FE; } switch (config_id->slot) { case AHC_398X_SLOT_CHANNEL_A: break; case AHC_398X_SLOT_CHANNEL_B: channel = 'B'; break; case AHC_398X_SLOT_CHANNEL_C: channel = 'C'; break; default: printf("adapter at unexpected slot %d\n" "unable to map to a channel\n", config_id->slot); } ahc_f |= AHC_LARGE_SEEPROM; break; case PCI_DEVICE_ID_ADAPTEC_3940U: case PCI_DEVICE_ID_ADAPTEC_3940: if (id == PCI_DEVICE_ID_ADAPTEC_3940U) { ahc_t = AHC_AIC7880; ahc_fe = AHC_AIC7880_FE; } else { ahc_t = AHC_AIC7870; ahc_fe = AHC_AIC7870_FE; } switch (config_id->slot) { case AHC_394X_SLOT_CHANNEL_A: break; case AHC_394X_SLOT_CHANNEL_B: channel = 'B'; break; default: printf("adapter at unexpected slot %d\n" "unable to map to a channel\n", config_id->slot); } break; case PCI_DEVICE_ID_ADAPTEC_AIC7890: case PCI_DEVICE_ID_ADAPTEC_2940U2: { ahc_t = AHC_AIC7890; ahc_fe = AHC_AIC7890_FE; break; } case PCI_DEVICE_ID_ADAPTEC_AIC7896: { ahc_t = AHC_AIC7896; ahc_fe = AHC_AIC7896_FE; break; } case PCI_DEVICE_ID_ADAPTEC_2944U: case PCI_DEVICE_ID_ADAPTEC_2940U: case PCI_DEVICE_ID_ADAPTEC_AIC7880: ahc_t = AHC_AIC7880; ahc_fe = AHC_AIC7880_FE; break; case PCI_DEVICE_ID_ADAPTEC_2944: case PCI_DEVICE_ID_ADAPTEC_2940: case PCI_DEVICE_ID_ADAPTEC_AIC7870: ahc_t = AHC_AIC7870; ahc_fe = AHC_AIC7870_FE; break; case PCI_DEVICE_ID_ADAPTEC_2940AU: case PCI_DEVICE_ID_ADAPTEC_AIC7860: ahc_fe = AHC_AIC7860_FE; ahc_t = AHC_AIC7860; break; case PCI_DEVICE_ID_ADAPTEC_AIC7895: { u_int32_t devconfig; ahc_t = AHC_AIC7895; ahc_fe = AHC_AIC7895_FE; devconfig = pci_conf_read(config_id, DEVCONFIG); devconfig &= ~SCBSIZE32; pci_conf_write(config_id, DEVCONFIG, devconfig); break; } case PCI_DEVICE_ID_ADAPTEC_AIC7855: case PCI_DEVICE_ID_ADAPTEC_AIC7850: ahc_t = AHC_AIC7850; ahc_fe = AHC_AIC7850_FE; break; case PCI_DEVICE_ID_ADAPTEC_AIC7810: printf("RAID functionality unsupported\n"); return; default: break; } /* On all PCI adapters, we allow SCB paging */ ahc_f |= AHC_PAGESCBS; if ((ahc = ahc_alloc(unit, io_port, vaddr, ahc_t|AHC_PCI, ahc_fe, ahc_f, shared_scb_data)) == NULL) return; /* XXX PCI code should take return status */ ahc->channel = channel; /* Allocate a dmatag for our SCB DMA maps */ /* XXX Should be a child of the PCI bus dma tag */ error = bus_dma_tag_create(/*parent*/NULL, /*alignment*/0, /*boundary*/0, /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, /*highaddr*/BUS_SPACE_MAXADDR, /*filter*/NULL, /*filterarg*/NULL, /*maxsize*/MAXBSIZE, /*nsegments*/AHC_NSEG, /*maxsegsz*/AHC_MAXTRANSFER_SIZE, /*flags*/BUS_DMA_ALLOCNOW, &ahc->dmat); if (error != 0) { printf("%s: Could not allocate DMA tag - error %d\n", ahc_name(ahc), error); ahc_free(ahc); return; } /* Store our PCI bus information for use in our PCI error handler */ ahc->pci_config_id = config_id; /* Remeber how the card was setup in case there is no SEEPROM */ ahc_outb(ahc, HCNTRL, ahc->pause); if ((ahc->features & AHC_ULTRA2) != 0) our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID; else our_id = ahc_inb(ahc, SCSIID) & OID; sxfrctl1 = ahc_inb(ahc, SXFRCTL1) & STPWEN; scsiseq = ahc_inb(ahc, SCSISEQ); if (ahc_reset(ahc) != 0) { /* Failed */ ahc_free(ahc); return; } /* * Take a look to see if we have external SRAM. * We currently do not attempt to use SRAM that is * shared among multiple controllers. */ if ((ahc->features & AHC_ULTRA2) != 0) { u_int dscommand0; dscommand0 = ahc_inb(ahc, DSCOMMAND0); if ((dscommand0 & RAMPS) != 0) { u_int32_t devconfig; devconfig = pci_conf_read(config_id, DEVCONFIG); if ((devconfig & MPORTMODE) != 0) { /* Single user mode */ /* * XXX Assume 9bit SRAM and enable * parity checking */ devconfig |= EXTSCBPEN; pci_conf_write(config_id, DEVCONFIG, devconfig); /* * Set the bank select apropriately. */ if (ahc->channel == 'B') ahc_outb(ahc, SCBBADDR, 1); else ahc_outb(ahc, SCBBADDR, 0); /* Select external SCB SRAM */ dscommand0 &= ~INTSCBRAMSEL; ahc_outb(ahc, DSCOMMAND0, dscommand0); if (ahc_probe_scbs(ahc) == 0) { /* External ram isn't really there */ dscommand0 |= INTSCBRAMSEL; ahc_outb(ahc, DSCOMMAND0, dscommand0); } else if (bootverbose) printf("%s: External SRAM bank%d\n", ahc_name(ahc), ahc->channel == 'B' ? 1 : 0); } } } else if ((ahc->chip & AHC_CHIPID_MASK) >= AHC_AIC7870) { u_int32_t devconfig = pci_conf_read(config_id, DEVCONFIG); if ((devconfig & RAMPSM) != 0 && (devconfig & MPORTMODE) != 0) { /* XXX Assume 9bit SRAM and enable parity checking */ devconfig |= EXTSCBPEN; /* XXX Assume fast SRAM */ devconfig &= ~EXTSCBTIME; /* * Set the bank select apropriately. */ if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) { if (ahc->channel == 'B') ahc_outb(ahc, SCBBADDR, 1); else ahc_outb(ahc, SCBBADDR, 0); } /* Select external SRAM */ devconfig &= ~SCBRAMSEL; pci_conf_write(config_id, DEVCONFIG, devconfig); if (ahc_probe_scbs(ahc) == 0) { /* External ram isn't really there */ devconfig |= SCBRAMSEL; pci_conf_write(config_id, DEVCONFIG, devconfig); } else if (bootverbose) printf("%s: External SRAM bank%d\n", ahc_name(ahc), ahc->channel == 'B' ? 1 : 0); } } if (!(pci_map_int(config_id, ahc_intr, (void *)ahc, &cam_imask))) { ahc_free(ahc); return; } /* * Protect ourself from spurrious interrupts during * intialization. */ opri = splcam(); /* * Do aic7880/aic7870/aic7860/aic7850 specific initialization */ { u_int8_t sblkctl; char *id_string; switch(ahc_t) { case AHC_AIC7896: { u_int dscommand0; /* * DPARCKEN doesn't work correctly on * some MBs so don't use it. */ id_string = "aic7896/97 "; dscommand0 = ahc_inb(ahc, DSCOMMAND0); dscommand0 &= ~(USCBSIZE32|DPARCKEN); dscommand0 |= CACHETHEN|MPARCKEN; ahc_outb(ahc, DSCOMMAND0, dscommand0); break; } case AHC_AIC7890: { u_int dscommand0; /* * DPARCKEN doesn't work correctly on * some MBs so don't use it. */ id_string = "aic7890/91 "; dscommand0 = ahc_inb(ahc, DSCOMMAND0); dscommand0 &= ~(USCBSIZE32|DPARCKEN); dscommand0 |= CACHETHEN|MPARCKEN; ahc_outb(ahc, DSCOMMAND0, dscommand0); break; } case AHC_AIC7895: id_string = "aic7895 "; break; case AHC_AIC7880: id_string = "aic7880 "; break; case AHC_AIC7870: id_string = "aic7870 "; break; case AHC_AIC7860: id_string = "aic7860 "; break; case AHC_AIC7850: id_string = "aic7850 "; break; default: printf("ahc: Unknown controller type. Ignoring.\n"); ahc_free(ahc); splx(opri); return; } /* See if we have an SEEPROM and perform auto-term */ check_extport(ahc, &sxfrctl1); /* * Take the LED out of diagnostic mode */ sblkctl = ahc_inb(ahc, SBLKCTL); ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON))); /* * I don't know where this is set in the SEEPROM or by the * BIOS, so we default to 100% on Ultra or slower controllers * and 75% on ULTRA2 controllers. */ if ((ahc->features & AHC_ULTRA2) != 0) { ahc_outb(ahc, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75); } else { ahc_outb(ahc, DSPCISTATUS, DFTHRSH_100); } if (ahc->flags & AHC_USEDEFAULTS) { /* * PCI Adapter default setup * Should only be used if the adapter does not have * an SEEPROM. */ /* See if someone else set us up already */ if (scsiseq != 0) { printf("%s: Using left over BIOS settings\n", ahc_name(ahc)); ahc->flags &= ~AHC_USEDEFAULTS; } else { /* * Assume only one connector and always turn * on termination. */ our_id = 0x07; sxfrctl1 = STPWEN; } ahc_outb(ahc, SCSICONF, (our_id & 0x07)|ENSPCHK|RESET_SCSI); ahc->our_id = our_id; } printf("%s: %s", ahc_name(ahc), id_string); } /* * Record our termination setting for the * generic initialization routine. */ if ((sxfrctl1 & STPWEN) != 0) ahc->flags |= AHC_TERM_ENB_A; if (ahc_init(ahc)) { ahc_free(ahc); splx(opri); return; /* XXX PCI code should take return status */ } /* XXX Crude hack - fix sometime */ if (ahc->flags & AHC_SHARED_SRAM) { /* Only set this once we've successfully probed */ if (shared_scb_data == NULL) first_398X = ahc; } splx(opri); ahc_attach(ahc); } /* * Check the external port logic for a serial eeprom * and termination/cable detection contrls. */ static void check_extport(struct ahc_softc *ahc, u_int8_t *sxfrctl1) { struct seeprom_descriptor sd; struct seeprom_config sc; u_int8_t scsi_conf; int have_seeprom; sd.sd_tag = ahc->tag; sd.sd_bsh = ahc->bsh; sd.sd_control_offset = SEECTL; sd.sd_status_offset = SEECTL; sd.sd_dataout_offset = SEECTL; /* * For some multi-channel devices, the c46 is simply too * small to work. For the other controller types, we can * get our information from either SEEPROM type. Set the * type to start our probe with accordingly. */ if (ahc->flags & AHC_LARGE_SEEPROM) sd.sd_chip = C56_66; else sd.sd_chip = C46; sd.sd_MS = SEEMS; sd.sd_RDY = SEERDY; sd.sd_CS = SEECS; sd.sd_CK = SEECK; sd.sd_DO = SEEDO; sd.sd_DI = SEEDI; have_seeprom = acquire_seeprom(ahc, &sd); if (have_seeprom) { if (bootverbose) printf("%s: Reading SEEPROM...", ahc_name(ahc)); for (;;) { bus_size_t start_addr; start_addr = 32 * (ahc->channel - 'A'); have_seeprom = read_seeprom(&sd, (u_int16_t *)&sc, start_addr, sizeof(sc)/2); if (have_seeprom) { /* Check checksum */ int i; int maxaddr; u_int16_t *scarray; u_int16_t checksum; maxaddr = (sizeof(sc)/2) - 1; checksum = 0; scarray = (u_int16_t *)≻ for (i = 0; i < maxaddr; i++) checksum = checksum + scarray[i]; if (checksum == 0 || checksum != sc.checksum) { if (bootverbose && sd.sd_chip == C56_66) printf ("checksum error\n"); have_seeprom = 0; } else { if (bootverbose) printf("done.\n"); break; } } if (sd.sd_chip == C56_66) break; sd.sd_chip = C56_66; } } if (!have_seeprom) { if (bootverbose) printf("%s: No SEEPROM available.\n", ahc_name(ahc)); ahc->flags |= AHC_USEDEFAULTS; } else { /* * Put the data we've collected down into SRAM * where ahc_init will find it. */ int i; int max_targ = sc.max_targets & CFMAXTARG; if ((sc.adapter_control & CFULTRAEN) != 0) { /* * Determine if this adapter has a "newstyle" * SEEPROM format. */ for (i = 0; i < max_targ; i++) { if ((sc.device_flags[i] & CFSYNCHISULTRA) != 0){ ahc->flags |= AHC_NEWEEPROM_FMT; break; } } } for (i = 0; i < max_targ; i++) { u_int scsirate; u_int16_t target_mask; target_mask = 0x01 << i; if (sc.device_flags[i] & CFDISC) ahc->discenable |= target_mask; if ((ahc->flags & AHC_NEWEEPROM_FMT) != 0) { if ((sc.device_flags[i] & CFSYNCHISULTRA) != 0) ahc->ultraenb |= target_mask; } else if ((sc.adapter_control & CFULTRAEN) != 0) { ahc->ultraenb |= target_mask; } if ((sc.device_flags[i] & CFXFER) == 0x04 && (ahc->ultraenb & target_mask) != 0) { /* Treat 10MHz as a non-ultra speed */ sc.device_flags[i] &= ~CFXFER; ahc->ultraenb &= ~target_mask; } if ((ahc->features & AHC_ULTRA2) != 0) { u_int offset; if (sc.device_flags[i] & CFSYNCH) offset = MAX_OFFSET_ULTRA2; else offset = 0; ahc_outb(ahc, TARG_OFFSET + i, offset); scsirate = (sc.device_flags[i] & CFXFER) | ((ahc->ultraenb & target_mask) ? 0x18 : 0x10); if (sc.device_flags[i] & CFWIDEB) scsirate |= WIDEXFER; } else { scsirate = (sc.device_flags[i] & CFXFER) << 4; if (sc.device_flags[i] & CFSYNCH) scsirate |= SOFS; if (sc.device_flags[i] & CFWIDEB) scsirate |= WIDEXFER; } ahc_outb(ahc, TARG_SCSIRATE + i, scsirate); } ahc->our_id = sc.brtime_id & CFSCSIID; scsi_conf = (ahc->our_id & 0x7); if (sc.adapter_control & CFSPARITY) scsi_conf |= ENSPCHK; if (sc.adapter_control & CFRESETB) scsi_conf |= RESET_SCSI; if (sc.bios_control & CFEXTEND) ahc->flags |= AHC_EXTENDED_TRANS_A; if (ahc->features & AHC_ULTRA && (ahc->flags & AHC_NEWEEPROM_FMT) == 0) { /* Should we enable Ultra mode? */ if (!(sc.adapter_control & CFULTRAEN)) /* Treat us as a non-ultra card */ ahc->ultraenb = 0; } /* Set SCSICONF info */ ahc_outb(ahc, SCSICONF, scsi_conf); ahc_outb(ahc, DISC_DSB, ~(ahc->discenable & 0xff)); ahc_outb(ahc, DISC_DSB + 1, ~((ahc->discenable >> 8) & 0xff)); ahc_outb(ahc, ULTRA_ENB, ahc->ultraenb & 0xff); ahc_outb(ahc, ULTRA_ENB + 1, (ahc->ultraenb >> 8) & 0xff); } if ((ahc->features & AHC_SPIOCAP) != 0) { if ((ahc_inb(ahc, SPIOCAP) & SSPIOCPS) != 0) { configure_termination(ahc, &sc, &sd, sxfrctl1); } } else if (have_seeprom) { configure_termination(ahc, &sc, &sd, sxfrctl1); } release_seeprom(&sd); } static void configure_termination(struct ahc_softc *ahc, struct seeprom_config *sc, struct seeprom_descriptor *sd, u_int8_t *sxfrctl1) { int max_targ = sc->max_targets & CFMAXTARG; u_int8_t brddat; brddat = 0; /* * Update the settings in sxfrctl1 to match the *termination settings */ *sxfrctl1 = 0; /* * SEECS must be on for the GALS to latch * the data properly. Be sure to leave MS * on or we will release the seeprom. */ SEEPROM_OUTB(sd, sd->sd_MS | sd->sd_CS); if ((sc->adapter_control & CFAUTOTERM) != 0 || (ahc->features & AHC_ULTRA2) != 0) { int internal50_present; int internal68_present; int externalcable_present; int eeprom_present; int enableSEC_low; int enableSEC_high; int enablePRI_low; int enablePRI_high; enableSEC_low = 0; enableSEC_high = 0; enablePRI_low = 0; enablePRI_high = 0; if (ahc->features & AHC_ULTRA2) { ahc_ultra2_term_detect(ahc, &enableSEC_low, &enableSEC_high, &enablePRI_low, &enablePRI_high, &eeprom_present); if ((sc->adapter_control & CFSEAUTOTERM) == 0) { enableSEC_low = (sc->adapter_control & CFSTERM); enableSEC_high = (sc->adapter_control & CFWSTERM); } if ((sc->adapter_control & CFAUTOTERM) == 0) { enablePRI_low = enablePRI_high = (sc->adapter_control & CFLVDSTERM); } /* Make the table calculations below happy */ internal50_present = 0; internal68_present = 1; externalcable_present = 1; } else if ((ahc->features & AHC_SPIOCAP) != 0) { aic785X_cable_detect(ahc, &internal50_present, &externalcable_present, &eeprom_present); } else { aic787X_cable_detect(ahc, &internal50_present, &internal68_present, &externalcable_present, &eeprom_present); } if (max_targ <= 8) { internal68_present = 0; } if (bootverbose) { if ((ahc->features & AHC_ULTRA2) == 0) { printf("%s: internal 50 cable %s present, " "internal 68 cable %s present\n", ahc_name(ahc), internal50_present ? "is":"not", internal68_present ? "is":"not"); printf("%s: external cable %s present\n", ahc_name(ahc), externalcable_present ? "is":"not"); } printf("%s: BIOS eeprom %s present\n", ahc_name(ahc), eeprom_present ? "is" : "not"); } /* * Now set the termination based on what * we found. * Flash Enable = BRDDAT7 * Secondary High Term Enable = BRDDAT6 * Secondary Low Term Enable = BRDDAT5 (7890) * Primary High Term Enable = BRDDAT4 (7890) */ if ((ahc->features & AHC_ULTRA2) == 0 && (internal50_present != 0) && (internal68_present != 0) && (externalcable_present != 0)) { printf("%s: Illegal cable configuration!!. " "Only two connectors on the " "adapter may be used at a " "time!\n", ahc_name(ahc)); } if ((max_targ > 8) && ((externalcable_present == 0) || (internal68_present == 0) || (enableSEC_high != 0))) { brddat |= BRDDAT6; if (bootverbose) printf("%s: %sHigh byte termination Enabled\n", ahc_name(ahc), enableSEC_high ? "Secondary " : ""); } if (((internal50_present ? 1 : 0) + (internal68_present ? 1 : 0) + (externalcable_present ? 1 : 0)) <= 1 || (enableSEC_low != 0)) { if ((ahc->features & AHC_ULTRA2) != 0) brddat |= BRDDAT5; else *sxfrctl1 |= STPWEN; if (bootverbose) printf("%s: %sLow byte termination Enabled\n", ahc_name(ahc), enableSEC_low ? "Secondary " : ""); } if (enablePRI_low != 0) { *sxfrctl1 |= STPWEN; if (bootverbose) printf("%s: Primary Low Byte termination " "Enabled\n", ahc_name(ahc)); } if (enablePRI_high != 0) { brddat |= BRDDAT4; if (bootverbose) printf("%s: Primary High Byte " "termination Enabled\n", ahc_name(ahc)); } write_brdctl(ahc, brddat); } else { if (sc->adapter_control & CFSTERM) { if ((ahc->features & AHC_ULTRA2) != 0) brddat |= BRDDAT5; else *sxfrctl1 |= STPWEN; if (bootverbose) printf("%s: %sLow byte termination Enabled\n", ahc_name(ahc), (ahc->features & AHC_ULTRA2) ? "Primary " : ""); } if (sc->adapter_control & CFWSTERM) { brddat |= BRDDAT6; if (bootverbose) printf("%s: %sHigh byte termination Enabled\n", ahc_name(ahc), (ahc->features & AHC_ULTRA2) ? "Secondary " : ""); } write_brdctl(ahc, brddat); } SEEPROM_OUTB(sd, sd->sd_MS); /* Clear CS */ } static void ahc_ultra2_term_detect(struct ahc_softc *ahc, int *enableSEC_low, int *enableSEC_high, int *enablePRI_low, int *enablePRI_high, int *eeprom_present) { u_int8_t brdctl; /* * BRDDAT7 = Eeprom * BRDDAT6 = Enable Secondary High Byte termination * BRDDAT5 = Enable Secondary Low Byte termination * BRDDAT4 = Enable Primary low byte termination * BRDDAT3 = Enable Primary high byte termination */ brdctl = read_brdctl(ahc); *eeprom_present = brdctl & BRDDAT7; *enableSEC_high = (brdctl & BRDDAT6); *enableSEC_low = (brdctl & BRDDAT5); *enablePRI_low = (brdctl & BRDDAT4); *enablePRI_high = (brdctl & BRDDAT3); } static void aic787X_cable_detect(struct ahc_softc *ahc, int *internal50_present, int *internal68_present, int *externalcable_present, int *eeprom_present) { u_int8_t brdctl; /* * First read the status of our cables. * Set the rom bank to 0 since the * bank setting serves as a multiplexor * for the cable detection logic. * BRDDAT5 controls the bank switch. */ write_brdctl(ahc, 0); /* * Now read the state of the internal * connectors. BRDDAT6 is INT50 and * BRDDAT7 is INT68. */ brdctl = read_brdctl(ahc); *internal50_present = !(brdctl & BRDDAT6); *internal68_present = !(brdctl & BRDDAT7); /* * Set the rom bank to 1 and determine * the other signals. */ write_brdctl(ahc, BRDDAT5); /* * Now read the state of the external * connectors. BRDDAT6 is EXT68 and * BRDDAT7 is EPROMPS. */ brdctl = read_brdctl(ahc); *externalcable_present = !(brdctl & BRDDAT6); *eeprom_present = brdctl & BRDDAT7; } static void aic785X_cable_detect(struct ahc_softc *ahc, int *internal50_present, int *externalcable_present, int *eeprom_present) { u_int8_t brdctl; ahc_outb(ahc, BRDCTL, BRDRW|BRDCS); ahc_outb(ahc, BRDCTL, 0); brdctl = ahc_inb(ahc, BRDCTL); *internal50_present = !(brdctl & BRDDAT5); *externalcable_present = !(brdctl & BRDDAT6); *eeprom_present = (ahc_inb(ahc, SPIOCAP) & EEPROM) != 0; } static int acquire_seeprom(struct ahc_softc *ahc, struct seeprom_descriptor *sd) { int wait; if ((ahc->features & AHC_SPIOCAP) != 0 && (ahc_inb(ahc, SPIOCAP) & SEEPROM) == 0) return (0); /* * Request access of the memory port. When access is * granted, SEERDY will go high. We use a 1 second * timeout which should be near 1 second more than * is needed. Reason: after the chip reset, there * should be no contention. */ SEEPROM_OUTB(sd, sd->sd_MS); wait = 1000; /* 1 second timeout in msec */ while (--wait && ((SEEPROM_STATUS_INB(sd) & sd->sd_RDY) == 0)) { DELAY(1000); /* delay 1 msec */ } if ((SEEPROM_STATUS_INB(sd) & sd->sd_RDY) == 0) { SEEPROM_OUTB(sd, 0); return (0); } return(1); } static void release_seeprom(sd) struct seeprom_descriptor *sd; { /* Release access to the memory port and the serial EEPROM. */ SEEPROM_OUTB(sd, 0); } static void write_brdctl(ahc, value) struct ahc_softc *ahc; u_int8_t value; { u_int8_t brdctl; if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) { brdctl = BRDSTB; if (ahc->channel == 'B') brdctl |= BRDCS; } else if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7890) { brdctl = 0; } else { brdctl = BRDSTB|BRDCS; } ahc_outb(ahc, BRDCTL, brdctl); brdctl |= value; ahc_outb(ahc, BRDCTL, brdctl); if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7890) brdctl |= BRDSTB_ULTRA2; else brdctl &= ~BRDSTB; ahc_outb(ahc, BRDCTL, brdctl); if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7890) brdctl = 0; else brdctl &= ~BRDCS; ahc_outb(ahc, BRDCTL, brdctl); } static u_int8_t read_brdctl(ahc) struct ahc_softc *ahc; { u_int8_t brdctl; u_int8_t value; if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) { brdctl = BRDRW; if (ahc->channel == 'B') brdctl |= BRDCS; } else if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7890) { brdctl = BRDRW_ULTRA2; } else { brdctl = BRDRW|BRDCS; } ahc_outb(ahc, BRDCTL, brdctl); value = ahc_inb(ahc, BRDCTL); ahc_outb(ahc, BRDCTL, 0); return (value); } #define DPE 0x80 #define SSE 0x40 #define RMA 0x20 #define RTA 0x10 #define STA 0x08 #define DPR 0x01 void ahc_pci_intr(struct ahc_softc *ahc) { u_int8_t status1; status1 = pci_cfgread(ahc->pci_config_id, PCIR_STATUS + 1, /*bytes*/1); if (status1 & DPE) { printf("%s: Data Parity Error Detected during address " "or write data phase\n", ahc_name(ahc)); } if (status1 & SSE) { printf("%s: Signal System Error Detected\n", ahc_name(ahc)); } if (status1 & RMA) { printf("%s: Received a Master Abort\n", ahc_name(ahc)); } if (status1 & RTA) { printf("%s: Received a Target Abort\n", ahc_name(ahc)); } if (status1 & STA) { printf("%s: Signaled a Target Abort\n", ahc_name(ahc)); } if (status1 & DPR) { printf("%s: Data Parity Error has been reported via PERR#\n", ahc_name(ahc)); } if ((status1 & (DPE|SSE|RMA|RTA|STA|DPR)) == 0) { printf("%s: Latched PCIERR interrupt with " "no status bits set\n", ahc_name(ahc)); } pci_cfgwrite(ahc->pci_config_id, PCIR_STATUS + 1, status1, /*bytes*/1); if (status1 & (DPR|RMA|RTA)) { ahc_outb(ahc, CLRINT, CLRPARERR); } } #endif /* NPCI > 0 */