FreeBSD source tree https://cgit-dev.freebsd.org/src/atom?h=release%2F10.1.0 2014-09-22T15:32:31Z 2014-09-22T15:32:31Z Bjoern A. Zeeb bz@FreeBSD.org 2014-09-22T15:32:31Z urn:sha1:2d4ca429b5a499eb75a659e81027839f893d7fcc Merge atse(4) interrupt handling and race condition fixes from cheribsd. Obtained from: cheribsd Submitted by: rwatson, emaste Sponsored by: DARPA/AFRL Approved by: re (delphij) 2014-08-16T14:17:09Z Bjoern A. Zeeb bz@FreeBSD.org 2014-08-16T14:17:09Z urn:sha1:4b9b8e71c407aaf9c1e96540a5645e3652840211 Use ETHER_ALIGN as argument to m_adj() to offset the beginning of packet rather than the magic number 2. While here fix a typo in a comment. No functional changes. Sponsored by: DARPA/AFRL 2014-05-15T16:11:06Z Ian Lepore ian@FreeBSD.org 2014-05-15T16:11:06Z urn:sha1:359c68281f130a91637dbe0f7fe4f9ba4da79e58 Follow r261352 by updating all drivers which are children of simplebus to check the status property in their probe routines. 2014-05-14T01:35:43Z Ian Lepore ian@FreeBSD.org 2014-05-14T01:35:43Z urn:sha1:4dd6ff8e4d0abe80af9b290b75b1c5abbf9e3b9a r257368, r257416 Hints-only devices should return BUS_PROBE_NOWILDCARD from their probe methods. 2013-10-31T13:54:55Z Brooks Davis brooks@FreeBSD.org 2013-10-31T13:54:55Z urn:sha1:148fb7bba81d871946186175b7752533e0256637 MFP4: 221483, 221567, 221568, 221670, 221677, 221678, 221800, 221801, 221804, 221805, 222004, 222006, 222055, 222820, 1135077, 1135118, 1136259 Add atse(4), a driver for the Altera Triple Speed Ethernet MegaCore. The current driver support gigabit Ethernet speeds only and works with the MegaCore only in the internal FIFO configuration in the soon to be open sourced BERI CPU configuration. MFP4: 1187103, 222076, 222057, 222051, 221799 Add atsectl, a simple utility to read and update MAC addresses stored in the default flash location on Altera DE4 boards. Typically used once when setting up a board so leaving in tools rather than inflicting on all users. To build with world add LOCAL_DIRS=tools/tools/atsectl to the make command line. Submitted by: bz Sponsored by: DARPA/AFRL Approved by: re (glebius) 2013-10-31T13:47:39Z Brooks Davis brooks@FreeBSD.org 2013-10-31T13:47:39Z urn:sha1:153f1557edc19a11a809d77b919f9a33e118a455 MFP4: Change 227594 by brooks@brooks_zenith on 2013/04/11 17:10:14 When we fail, print the error that occurred if we are giving up or if bootverbose is set. MFP4 (driver change only): Change 231100 by brooks@brooks_zenith on 2013/07/12 21:01:31 Add a new option ALTERA_SDCARD_FAST_SIM which checks immediately for success of I/O operations rather than queuing a task. Sponsored by: DARPA/AFRL Approved by: re (glebius) 2013-04-30T18:29:05Z Brooks Davis brooks@FreeBSD.org 2013-04-30T18:29:05Z urn:sha1:d8f45cbfe8e7b8dd523889cb825c0e787923d4b4 Due to the requirement that tty prefixes be unique per driver, rename the Altera JTAG UART devices to ttyj#. Sponsored by: DARPA, AFRL 2013-01-22T18:51:14Z Brooks Davis brooks@FreeBSD.org 2013-01-22T18:51:14Z urn:sha1:6f1efb0f4bc18ba33c51f38e879a0485fc2edbb8 Add a missing 0 to the mask for byte0 of C_SIZE. The previous mask (0xc) worked except that the last 0-1536K of the disk could not be accessed since we were shifting the (wrong) bits we did mask off the right edge. 2013-01-22T18:48:45Z Brooks Davis brooks@FreeBSD.org 2013-01-22T18:48:45Z urn:sha1:9f9f029919eb1fd4e1b2b4957a5acc85ccc19940 Remove a duplicate computation of C_SIZE_MULT. Once is sufficient. Sponsored by: DARPA, AFRL 2013-01-13T16:57:11Z Robert Watson rwatson@FreeBSD.org 2013-01-13T16:57:11Z urn:sha1:6a347d023b6f100dd86284723c03496d06c4736c Make different bus attachments for Altera and Terasice device drivers share the same devclass_t. Sponsored by: DARPA, AFRL