src/sys/dev/bge, branch release/4.8.0_cvs

This commit was manufactured by cvs2svn to create tag

2003-04-03T18:49:23Z

'RELENG_4_8_0_RELEASE'. This commit was manufactured to restore the state of the 4.8-RELEASE image. Releases prior to 5.3-RELEASE are omitting the secure/ and crypto/ subdirs.

MFC: rev 1.30 Read the media type from shared memory.

2003-02-06T21:36:40Z

MFC: Avoid 16-bit accesses to device memory. Use volatile where

2003-01-09T18:15:50Z

appropriate in referencing device memory. Parenthesize BGE_HOSTADDR define properly. Add the ASIC revision to the device description string that appears in the dmesg output. This merges in the following revisions from -current: if_bge.c 1.26 and 1.27 if_bgereg.h 1.12

MFC:

2002-11-02T18:22:23Z

v1.21: Follow the lead of recent changes in the 3com Linux driver by disabling memory write invalidate unconditionally. It looks like they've decided that MWI just doesn't work with these devices. Also, remove now-irrelevant code that set PCI write boundary values based on the cache line size. v1.22: Fix a couple of longstanding typos which would have made a statement fail to compile if it weren't inside "#ifdef __brokenalpha__". Approved by: jdp

MFC: Add support for the BCM5703x chips. I do not have one of these

2002-11-02T18:17:55Z

cards to test; however the submitter reports that this patch works with the on-board interface on the IBM x235 server. Approved by: jdp

MFC:

2002-10-10T16:02:33Z

src/sys/dev/bge if_bge.c (1.23) src/sys/dev/bge if_bgereg.h (1.8) Add support for the BCM5702x chips.

MFC 1.20: Set up the DMA Read/Write Control register more correctly.

2002-09-25T15:23:03Z

(A fix for the transmit watchdog timeouts on Dell 2650 and possibly other PCI-X systems.) Approved by: re

MFC: Recognize the Altima AC9100 chip used in current versions of

2002-07-27T17:00:41Z

the Netgear GA302-T. This merges if_bge.c revision 1.18 and if_bgereg.h revision 1.6. PR: kern/38988

MFC 1.17: Don't claim to support checksum offloading for IP fragments,

2002-07-06T00:15:21Z

because it doesn't seem to work for UDP packets.

MFC: Add missing splx call (if_bge.c revision 1.15).

2002-06-30T17:46:35Z

Submitted by: Mark Peek