src/sys/dev/bktr/bktr_i2c.c, branch releng/12.4

sys/dev: further adoption of SPDX licensing ID tags.

2017-11-27T14:52:40Z

Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.

Remove extraneous semicolons, no functional changes.

2010-01-07T21:01:37Z

Submitted by: Marc Balmer MFC after: 1 week

Add locking to the various iicbus(4) bridge drivers:

2008-08-04T20:46:15Z

- Just grab Giant in the ixp425_iic(4) driver since this driver uses a shared address/data register window pair to access the actual I2C registers. None of the other ixp425 drivers lock access to these shared address/data registers yet and that would need to be done before this could use any meaningful locking. - Add locking to the interrupt handler and 'iicbus_reset' methods of the at91_twi(4) driver. - Add locking to the pcf(4) driver. Other pcf(4) fixes include: - Don't needlessly zero the softc. - Use bus_foo rather than bus_space_foo and remove bus space tag and handle from softc. - The lpbb(4) driver just grabs Giant for now. This will be refined later when ppbus(4) is locked. - As was done with smbus earlier, move the DRIVER_MODULE() lines to match the bus driver (either iicbus or iicbb) to the bridge driver into the bridge drivers. Tested by: sam (arm/ixp425)

Explicitly lock Giant in smbus_if methods in the bktr_i2c and iicsmb

2008-06-06T18:40:38Z

drivers for now. This can be replaced with driver locks when these drivers are locked.

remove delays that have been unnecessary since 2002... The iicbb driver

2006-12-31T19:42:47Z

has the proper delays...

Minor overhaul of SMBus support:

2006-09-11T20:52:41Z

- Change smbus_callback() to pass a void * rather than caddr_t. - Change smbus_bread() to pass a pointer to the count and have it be an in/out parameter. The input is the size of the buffer (same as before), but on return it will contain the actual amount of data read back from the bus. Note that this value may be larger than the input value. It is up to the caller to treat this as an error if desired. - Change the SMB_BREAD ioctl to write out the updated struct smbcmd which will contain the actual number of bytes read in the 'count' field. To preserve the previous ABI, the old ioctl value is mapped to SMB_OLD_BREAD which doesn't copy the updated smbcmd back out to userland. I doubt anyone actually used the old BREAD anyway as it was rediculous to do a bulk-read but not tell the using program how much data was actually read. - Make the smbus driver and devclass public in the smbus module and push all the DRIVER_MODULE()'s for attaching the smbus driver to various foosmb drivers out into the foosmb modules. This makes all the foosmb logic centralized and allows new foosmb modules to be self-contained w/o having to hack smbus.c everytime a new smbus driver is added. - Add a new SMB_EINVAL error bit and use it in place of EINVAL to return an error for bad arguments (such as invalid counts for bread and bwrite). - Map SMB bus error bits to EIO in smbus_error(). - Make the smbus driver call bus_generic_probe() and require child drivers such as smb(4) to create device_t's via identify routines. Previously, smbus just created one anonymous device during attach, and if you had multiple drivers that could attach it was just random chance as to which driver got to probe for the sole device_t first. - Add a mutex to the smbus(4) softc and use it in place of dummy splhigh() to protect the 'owner' field and perform necessary synchronization for smbus_request_bus() and smbus_release_bus(). - Change the bread() and bwrite() methods of alpm(4), amdpm(4), and viapm(4) to only perform a single transaction and not try to use a loop of multiple transactions for a large request. The framing and commands to use for a large transaction depend on the upper-layer protocol (such as SSIF for IPMI over SMBus) from what I can tell, and the smb(4) driver never allowed bulk read/writes of more than 32-bytes anyway. The other smb drivers only performed single transactions. - Fix buffer overflows in the bread() methods of ichsmb(4), alpm(4), amdpm(4), amdsmb(4), intpm(4), and nfsmb(4). - Use SMB_xxx errors in viapm(4). - Destroy ichsmb(4)'s mutex after bus_generic_detach() to avoid problems from child devices making smb upcalls that would use the mutex during their detach methods. MFC after: 1 week Reviewed by: jmg (mostly)

Remove bus_{mem,p}io.h and related code for a micro-optimization on i386

2005-05-29T04:42:30Z

and amd64. The optimization is a trivial on recent machines. Reviewed by: -arch (imp, marcel, dfr)

Remove support for FreeBSD < 4.recent from this driver.

2005-01-08T22:52:00Z

Move the bktr(4) /include/ioctl_{bt848,meteor}.h files to dev/bktr

2003-12-08T07:59:18Z

as these ioctl's aren't MD. This also means they are installed in /usr/include/dev/bktr now. Also provide compatability wrappers for where these headers lived in 4.x.

Use __FBSDID().

2003-08-24T17:55:58Z

Also some minor style cleanups.