src/sys/dev/mlx, branch stable/9

MFC r280347: Remove MAXBSIZE use from drivers where it has nothing to do.

2015-04-21T11:29:07Z

In some cases limits are just not needed, in others -- DFLTPHYS is the right constant to use instead.

Merge r254263:

2013-08-13T22:05:50Z

Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Candidate for 9.2 Submitted by: jhb Reviewed by: jfv, marius, adrian, achim

MFC r238997:

2012-08-20T18:01:17Z

Correct a typo. Reported by: Sascha Wildner Reviewed by: scottl

MFC 232854,232874,232882,232883,232886 for bus_get_dma_tag()

2012-03-16T08:46:58Z

MFC r226173, r227843, r227848 and r227908:

2011-12-31T14:12:12Z

Use DEVMETHOD_END to mark end of device methods. Remove superfluous device methods. Add some missing __FBSBID() macros.

Temporarily revert the new-bus locking for 8.0 release. It will be

2009-08-20T19:17:53Z

reintroduced after HEAD is reopened for commits by re@. Approved by: re (kib), attilio

Make the newbus subsystem Giant free by adding the new newbus sxlock.

2009-08-02T14:28:40Z

The newbus lock is responsible for protecting newbus internIal structures, device states and devclass flags. It is necessary to hold it when all such datas are accessed. For the other operations, softc locking should ensure enough protection to avoid races. Newbus lock is automatically held when virtual operations on the device and bus are invoked when loading the driver or when the suspend/resume take place. For other 'spourious' operations trying to access/modify the newbus topology, newbus lock needs to be automatically acquired and dropped. For the moment Giant is also acquired in some key point (modules subsystem) in order to avoid problems before the 8.0 release as module handlers could make assumptions about it. This Giant locking should go just after the release happens. Please keep in mind that the public interface can be expanded in order to provide more support, if there are really necessities at some point and also some bugs could arise as long as the patch needs a bit of further testing. Bump __FreeBSD_version in order to reflect the newbus lock introduction. Reviewed by: ed, hps, jhb, imp, mav, scottl No answer by: ariff, thompsa, yongari Tested by: pho, G. Trematerra , Brandon Gooch Sponsored by: Yahoo! Incorporated Approved by: re (ksmith)

Separate the parallel scsi knowledge out of the core of the XPT, and

2009-07-10T08:18:08Z

modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re

Convert mlx(4) and mly(4) to si_drv1 instead of dev2unit().

2009-04-18T07:36:38Z

Replace all calls to minor() with dev2unit().

2008-09-27T08:51:18Z

After I removed all the unit2minor()/minor2unit() calls from the kernel yesterday, I realised calling minor() everywhere is quite confusing. Character devices now only have the ability to store a unit number, not a minor number. Remove the confusion by using dev2unit() everywhere. This commit could also be considered as a bug fix. A lot of drivers call minor(), while they should actually be calling dev2unit(). In -CURRENT this isn't a problem, but it turns out we never had any problem reports related to that issue in the past. I suspect not many people connect more than 256 pieces of the same hardware. Reviewed by: kib