<feed xmlns='http://www.w3.org/2005/Atom'>
<title>src/sys/dev/rtwn, branch release/12.3.0</title>
<subtitle>FreeBSD source tree</subtitle>
<id>https://cgit-dev.freebsd.org/src/atom?h=release%2F12.3.0</id>
<link rel='self' href='https://cgit-dev.freebsd.org/src/atom?h=release%2F12.3.0'/>
<link rel='alternate' type='text/html' href='https://cgit-dev.freebsd.org/src/'/>
<updated>2021-07-19T06:49:53Z</updated>
<entry>
<title>rtwn: make sure to not write in upper bits of txdseq</title>
<updated>2021-07-19T06:49:53Z</updated>
<author>
<name>Andriy Gapon</name>
<email>avg@FreeBSD.org</email>
</author>
<published>2021-06-21T08:05:04Z</published>
<link rel='alternate' type='text/html' href='https://cgit-dev.freebsd.org/src/commit/?id=038279d2a86f904b51f1b65d1ef283c09884b04f'/>
<id>urn:sha1:038279d2a86f904b51f1b65d1ef283c09884b04f</id>
<content type='text'>
ni_txseqs is kept as 16-bit counter, but we need to trim the upper four
bits as they may have special meanings for the firmware / hardware.
For instance, bit 15 enables hardware / firmware generation of sequence
numbers that overrides sequence numbers programmed by the driver.

Reviewed by:	adrian

(cherry picked from commit 7544c1d20d8b7127ed3511edeb94e01d328daebb)
</content>
</entry>
<entry>
<title>rtwn_usb(4): Add a USB ID for the TP-Link Archer T2U v3.</title>
<updated>2021-06-10T06:13:04Z</updated>
<author>
<name>Dmitry Chagin</name>
<email>dchagin@FreeBSD.org</email>
</author>
<published>2021-05-27T18:52:10Z</published>
<link rel='alternate' type='text/html' href='https://cgit-dev.freebsd.org/src/commit/?id=e34c3d0721bc52b4130489170e509266ce4e4b96'/>
<id>urn:sha1:e34c3d0721bc52b4130489170e509266ce4e4b96</id>
<content type='text'>
PR:		256203
Submitted by:	Steve Kargl sgk at troutmask.apl.washington.edu

(cherry picked from commit 434c46c00602e16115cfb19344e4c45135b68b09)
</content>
</entry>
<entry>
<title>MFC r366268 (and epoch parts of r357093):</title>
<updated>2020-11-05T15:27:38Z</updated>
<author>
<name>Bjoern A. Zeeb</name>
<email>bz@FreeBSD.org</email>
</author>
<published>2020-11-05T15:27:38Z</published>
<link rel='alternate' type='text/html' href='https://cgit-dev.freebsd.org/src/commit/?id=7d47bf77c6084bdf5b48187ae2a63e0573b9a9f1'/>
<id>urn:sha1:7d47bf77c6084bdf5b48187ae2a63e0573b9a9f1</id>
<content type='text'>
 rtwn: narrow the epoch area

  Rather than placing the epoch around the entire receive loop which
  might call into rtwn_rx_frame() and USB and sleep, split the loop
  into two and leave us with one unlock/lock cycle as well.

PR:		249925
</content>
</entry>
<entry>
<title>MFC r344749-344750,344841-344843,345284,346405,346470,347140-347141,348331,</title>
<updated>2020-09-10T19:00:17Z</updated>
<author>
<name>Bjoern A. Zeeb</name>
<email>bz@FreeBSD.org</email>
</author>
<published>2020-09-10T19:00:17Z</published>
<link rel='alternate' type='text/html' href='https://cgit-dev.freebsd.org/src/commit/?id=15a31d4c1a7da894840315916b3011190cc3e7c7'/>
<id>urn:sha1:15a31d4c1a7da894840315916b3011190cc3e7c7</id>
<content type='text'>
    349593,351868,353506-353507,353809,353853,353858,353860,356852,359063,
    359158,360819,360888,360950-360951,360953-360954,360998,361009,361025,
    361085,361087,361098,361106-361107,361115,361118,361319-361321,361486,
    361560,361566,361626,361636-361637,361687,361726,361737-361738,361768,
    361778,361811-361813,361819-361822,361825-361826,361834,361863-361864,
    361878,361885-361886,362016,362084-362085,362156-362157,362161-362162,
    362210-362213,362216,362256-362257,362671,362815-362816,363325,
    363327-363328,364011-364012,364299,364301,364303,364312,364315,
    364326-364327,364551,364553,364673,365097,365116,365125-365126,
    365130-365131,365198,365419
  by adrian(78), bcran(1), bz(13), cem(1), gavin(1), glebius(6),
     landonf(1), mjg(7)

Merge WiFi net80211, drivers, and management in order to support better 11n
and upcoming 11ac.

This includes an ath(4) update, some run(4) 11n support, 11n for otus(4),
A-MPDU, A-MSDU, A-MPDU+A-MSDU and Fast frames options, scanning fixes,
enahnced PRIV checks for jails, restored parent device name printing,
improvements for upcoming VHT support, lots of under-the-hood infrastructure
improvements, new device ID, debug tools updates, some whistespace changes
(to make future MFCs easier).

This does not include (nost) epoch(9) related changes as too much other
infrastructure was not merged for that.

Bump __FreeBSD_veresion as this changes the priv(9) names (not know to be
used externally), and net80211 structures.

Tested on:	some ath(4) AP, run(4) STA, and rtwn(4) STA
Discussed with:	adrian (extremly briefly)
Sponsored by:	Rubicon Communications, LLC (d/b/a "Netgate") [partially]
Relnotes:	yes
</content>
</entry>
<entry>
<title>MFC r364993:</title>
<updated>2020-09-07T23:21:53Z</updated>
<author>
<name>Mark Johnston</name>
<email>markj@FreeBSD.org</email>
</author>
<published>2020-09-07T23:21:53Z</published>
<link rel='alternate' type='text/html' href='https://cgit-dev.freebsd.org/src/commit/?id=9611ca865b4ad915f912793e1efb3a32acfea151'/>
<id>urn:sha1:9611ca865b4ad915f912793e1efb3a32acfea151</id>
<content type='text'>
rtwn(4): Add support for the Belkin N300.

PR:	249034
</content>
</entry>
<entry>
<title>MFC r363950:</title>
<updated>2020-08-19T12:16:11Z</updated>
<author>
<name>Hans Petter Selasky</name>
<email>hselasky@FreeBSD.org</email>
</author>
<published>2020-08-19T12:16:11Z</published>
<link rel='alternate' type='text/html' href='https://cgit-dev.freebsd.org/src/commit/?id=b4fb7a07344a99e53611fd4b7b2fa1cf49185a03'/>
<id>urn:sha1:b4fb7a07344a99e53611fd4b7b2fa1cf49185a03</id>
<content type='text'>
Add new USB ID.

Submitted by:		Dmitry Luhtionov &lt;dmitryluhtionov@gmail.com&gt;
Sponsored by:		Mellanox Technologies
</content>
</entry>
<entry>
<title>MFC r350885 (by avos):</title>
<updated>2020-08-11T17:54:10Z</updated>
<author>
<name>Mark Johnston</name>
<email>markj@FreeBSD.org</email>
</author>
<published>2020-08-11T17:54:10Z</published>
<link rel='alternate' type='text/html' href='https://cgit-dev.freebsd.org/src/commit/?id=318319e6ce8d6610d72ac86a0b61ced6eec4fe11'/>
<id>urn:sha1:318319e6ce8d6610d72ac86a0b61ced6eec4fe11</id>
<content type='text'>
rtwn_pci: add device ID for RTL8192CE.

PR:	239795
</content>
</entry>
<entry>
<title>MFC r362672:</title>
<updated>2020-07-04T09:18:19Z</updated>
<author>
<name>Li-Wen Hsu</name>
<email>lwhsu@FreeBSD.org</email>
</author>
<published>2020-07-04T09:18:19Z</published>
<link rel='alternate' type='text/html' href='https://cgit-dev.freebsd.org/src/commit/?id=9b8dc4c5315df327074d107a65335dd573e47d95'/>
<id>urn:sha1:9b8dc4c5315df327074d107a65335dd573e47d95</id>
<content type='text'>
rtwn: Add a USB ID for Buffalo WI-U2-433DHP

PR:		247573
Submitted by:	HATANO Tomomi &lt;hatanou@infolab.ne.jp&gt;
</content>
</entry>
<entry>
<title>MFC r360966:</title>
<updated>2020-05-19T03:24:45Z</updated>
<author>
<name>Mark Johnston</name>
<email>markj@FreeBSD.org</email>
</author>
<published>2020-05-19T03:24:45Z</published>
<link rel='alternate' type='text/html' href='https://cgit-dev.freebsd.org/src/commit/?id=0951a97ca9534c0b7e850306673ef0eb8d35c039'/>
<id>urn:sha1:0951a97ca9534c0b7e850306673ef0eb8d35c039</id>
<content type='text'>
rtwn: Add a USB ID for the TP-Link TL-WN727N.

PR:	246417
</content>
</entry>
<entry>
<title>MFC r360848:</title>
<updated>2020-05-16T00:28:49Z</updated>
<author>
<name>Mark Johnston</name>
<email>markj@FreeBSD.org</email>
</author>
<published>2020-05-16T00:28:49Z</published>
<link rel='alternate' type='text/html' href='https://cgit-dev.freebsd.org/src/commit/?id=50de6e2636a50159ec4b77204a8de4c846d1534f'/>
<id>urn:sha1:50de6e2636a50159ec4b77204a8de4c846d1534f</id>
<content type='text'>
rtwn: Add a new USB ID.

PR:	246315
</content>
</entry>
</feed>
