FreeBSD source tree https://cgit-dev.freebsd.org/src/atom?h=release%2F10.1.0 2013-08-12T23:30:01Z 2013-08-12T23:30:01Z Scott Long scottl@FreeBSD.org 2013-08-12T23:30:01Z urn:sha1:c68534f1d5bab4ad466384c4fb9bb2956811e8b9 command register. The lazy BAR allocation code in FreeBSD sometimes disables this bit when it detects a range conflict, and will re-enable it on demand when a driver allocates the BAR. Thus, the bit is no longer a reliable indication of capability, and should not be checked. This results in the elimination of a lot of code from drivers, and also gives the opportunity to simplify a lot of drivers to use a helper API to set the busmaster enable bit. This changes fixes some recent reports of disk controllers and their associated drives/enclosures disappearing during boot. Submitted by: jhb Reviewed by: jfv, marius, achadd, achim MFC after: 1 day 2012-12-04T09:32:43Z Gleb Smirnoff glebius@FreeBSD.org 2012-12-04T09:32:43Z urn:sha1:c6499eccad497913a5025fbde8ae76da70e08043 malloc(9) flags in sys/dev. 2012-11-05T19:16:27Z Dimitry Andric dim@FreeBSD.org 2012-11-05T19:16:27Z urn:sha1:29658c96ce9914fdf4ff4e3519fbec696ef32118 them, please let me know if not). Most of these are of the form: static const struct bzzt_type { [...list of members...] } const bzzt_devs[] = { [...list of initializers...] }; The second const is unnecessary, as arrays cannot be modified anyway, and if the elements are const, the whole thing is const automatically (e.g. it is placed in .rodata). I have verified this does not change the binary output of a full kernel build (except for build timestamps embedded in the object files). Reviewed by: yongari, marius MFC after: 1 week 2012-01-07T09:41:57Z Kevin Lo kevlo@FreeBSD.org 2012-01-07T09:41:57Z urn:sha1:5bbe0c5357ab1559478babc8c2cf244cff5e98b7 Reviewed by: yongari 2011-11-22T21:55:40Z Marius Strobl marius@FreeBSD.org 2011-11-22T21:55:40Z urn:sha1:848e30ff519e332f8f8d11ace65d86fb15470258 of kobj(9) from device drivers. 2011-11-01T16:13:59Z Marius Strobl marius@FreeBSD.org 2011-11-01T16:13:59Z urn:sha1:8c1093fc50ab084b2ddd4750290a23d62616e0b6 take advantage of it instead of duplicating it. This reduces the size of the i386 GENERIC kernel by about 4k. The only potential in-tree user left unconverted is xe(4), which generally should be changed to use miibus(4) instead of implementing PHY handling on its own, as otherwise it makes not much sense to add a dependency on miibus(4)/mii_bitbang(4) to xe(4) just for the MII bitbang'ing code. The common MII bitbang'ing code also is useful in the embedded space for using GPIO pins to implement MII access. - Based on lessons learnt with dc(4) (see r185750), add bus barriers to the MII bitbang read and write functions of the other drivers converted in order to ensure the intended ordering. Given that register access via an index register as well as register bank/window switching is subject to the same problem, also add bus barriers to the respective functions of smc(4), tl(4) and xl(4). - Sprinkle some const. Thanks to the following testers: Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4)) Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4). Reviewed by: yongari (subset of drivers) Obtained from: NetBSD (partially) 2011-10-09T20:27:20Z Marius Strobl marius@FreeBSD.org 2011-10-09T20:27:20Z urn:sha1:882e24b03a6a4ae0f13f7dae1d49bdddedfbeaa2 2011-03-11T22:23:46Z Marius Strobl marius@FreeBSD.org 2011-03-11T22:23:46Z urn:sha1:a1dd7a55b06d41387b81fbaa49ef66be1dce18d5 coherent. MFC after: 2 weeks 2010-11-14T13:26:10Z Marius Strobl marius@FreeBSD.org 2010-11-14T13:26:10Z urn:sha1:efd4fc3fb31156de59dd14bc4f162dfffde39c5b support in mii(4): - Merge generic flow control advertisement (which can be enabled by passing by MIIF_DOPAUSE to mii_attach(9)) and parsing support from NetBSD into mii_physubr.c and ukphy_subr.c. Unlike as in NetBSD, IFM_FLOW isn't implemented as a global option via the "don't care mask" but instead as a media specific option this. This has the following advantages: o allows flow control advertisement with autonegotiation to be turned on and off via ifconfig(8) with the default typically being off (though MIIF_FORCEPAUSE has been added causing flow control to be always advertised, allowing to easily MFC this changes for drivers that previously used home-grown support for flow control that behaved that way without breaking POLA) o allows to deal with PHY drivers where flow control advertisement with manual selection doesn't work or at least isn't implemented, like it's the case with brgphy(4), e1000phy(4) and ip1000phy(4), by setting MIIF_NOMANPAUSE o the available combinations of media options are readily available from the `ifconfig -m` output - Add IFM_FLOW to IFM_SHARED_OPTION_DESCRIPTIONS and IFM_ETH_RXPAUSE and IFM_ETH_TXPAUSE to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so these are understood by ifconfig(8). o Make the master/slave support in mii(4) actually usable: - Change IFM_ETH_MASTER from being implemented as a global option via the "don't care mask" to a media specific one as it actually is only applicable to IFM_1000_T to date. - Let mii_phy_setmedia() set GTCR_MAN_MS in IFM_1000_T slave mode to actually configure manually selected slave mode (like we also do in the PHY specific implementations). - Add IFM_ETH_MASTER to IFM_SUBTYPE_ETHERNET_OPTION_DESCRIPTIONS so it is understood by ifconfig(8). o Switch bge(4), bce(4), msk(4), nfe(4) and stge(4) along with brgphy(4), e1000phy(4) and ip1000phy(4) to use the generic flow control support instead of home-grown solutions via IFM_FLAGs. This includes changing these PHY drivers and smcphy(4) to no longer unconditionally advertise support for flow control but only if the selected media has IFM_FLOW set (or MIIF_FORCEPAUSE is set) and implemented for these media variants, i.e. typically only for copper. o Switch brgphy(4), ciphy(4), e1000phy(4) and ip1000phy(4) to report and set IFM_1000_T master mode via IFM_ETH_MASTER instead of via IFF_LINK0 and some IFM_FLAGn. o Switch brgphy(4) to add at least the the supported copper media based on the contents of the BMSR via mii_phy_add_media() instead of hardcoding them. The latter approach seems to have developed historically, besides causing unnecessary code duplication it was also undesirable because brgphy_mii_phy_auto() already based the capability advertisement on the contents of the BMSR though. o Let brgphy(4) set IFM_1000_T master mode on all supported PHY and not just BCM5701. Apparently this was a misinterpretation of a workaround in the Linux tg3 driver; BCM5701 seem to require RGPHY_1000CTL_MSE and BRGPHY_1000CTL_MSC to be set when configuring autonegotiation but this doesn't mean we can't set these as well on other PHYs for manual media selection. o Let ukphy_status() report IFM_1000_T master mode via IFM_ETH_MASTER so IFM_1000_T master mode support now is generally available with all PHY drivers. o Don't let e1000phy(4) set master/slave bits for IFM_1000_SX as it's not applicable there. Reviewed by: yongari (plus additional testing) Obtained from: NetBSD (partially), OpenBSD (partially) MFC after: 2 weeks 2010-10-15T14:52:11Z Marius Strobl marius@FreeBSD.org 2010-10-15T14:52:11Z urn:sha1:8e5d93dbb40452863b266a378868255bf986af67 the NIC drivers as well as the PHY drivers to take advantage of the mii_attach() introduced in r213878 to get rid of certain hacks. For the most part these were: - Artificially limiting miibus_{read,write}reg methods to certain PHY addresses; we now let mii_attach() only probe the PHY at the desired address(es) instead. - PHY drivers setting MIIF_* flags based on the NIC driver they hang off from, partly even based on grabbing and using the softc of the parent; we now pass these flags down from the NIC to the PHY drivers via mii_attach(). This got us rid of all such hacks except those of brgphy() in combination with bce(4) and bge(4), which is way beyond what can be expressed with simple flags. While at it, I took the opportunity to change the NIC drivers to pass up the error returned by mii_attach() (previously by mii_phy_probe()) and unify the error message used in this case where and as appropriate as mii_attach() actually can fail for a number of reasons, not just because of no PHY(s) being present at the expected address(es). Reviewed by: jhb, yongari