src/sys/modules/bwi, branch release/13.2.0 FreeBSD source tree https://cgit-dev.freebsd.org/src/atom?h=release%2F13.2.0 2017-03-04T10:10:17Z sys/modules: normalize .CURDIR-relative paths to SRCTOP 2017-03-04T10:10:17Z Enji Cooper ngie@FreeBSD.org 2017-03-04T10:10:17Z urn:sha1:193d9e768ba63fcfb187cfd17f461f7d41345048 This simplifies make output/logic Tested with: `cd sys/modules; make ALL_MODULES=` on amd64 MFC after: 1 month Sponsored by: Dell EMC Isilon Strip out this cruft; people should be making modules with a complete 2013-11-09T08:11:24Z Adrian Chadd adrian@FreeBSD.org 2013-11-09T08:11:24Z urn:sha1:f8241f0c8895e8ecb3bca29a7459c7a044c0d287 kernel config environment anyway. Fix make depend. 2012-05-22T06:33:08Z Ulrich Spörlein uqs@FreeBSD.org 2012-05-22T06:33:08Z urn:sha1:dc8cf3fc68f07341abe2def015383a6b5cb942bc Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for 2009-05-03T04:01:43Z Warner Losh imp@FreeBSD.org 2009-05-03T04:01:43Z urn:sha1:12e36acb0995cce6d24054866e06f3e3cc694c8c Broadcom BCM43xx chipsets. This driver uses the v3 firmware that needs to be fetched separately. A port will be committed to create the bwi firmware module. The driver matches the following chips: Broadcom BCM4301, BCM4307, BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319 The driver works for 802.11b and 802.11g. Limitations: This doesn't support the 802.11a or 802.11n portion of radios. Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3. Documenation for this firmware is reverse engineered from http://bcm.sipsolutions.net/ V4 of the firmware is needed for 11a or 11n support http://bcm-v4.sipsolutions.net/ Firmware needs to be fetched from a third party, port to be committed # I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and # not connected it to the build until the firmware port is committed. Obtained from: DragonFlyBSD, //depot/projects/vap Reviewed by: sam@, thompsa@